1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# used. 33# - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME & KDE and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-perlinterp for Perl interpreter 42# --enable-pythoninterp for Python interpreter 43# --enable-rubyinterp for Ruby interpreter 44# --enable-tclinterp for Tcl interpreter 45# --enable-cscope for Cscope interface 46# - Uncomment one of the lines with --with-features= to enable a set of 47# features (but not the interfaces just mentioned). 48# - Uncomment the line with --disable-acl to disable ACL support even 49# though your system supports it. 50# - Uncomment the line with --disable-gpm to disable gpm support 51# even though you have gpm libraries and includes 52# - Uncomment one of the lines with CFLAGS and/or CC if you have 53# something very special or want to tune the optimizer. 54# - Search for the name of your system to see if it needs anything 55# special. 56# - A few versions of make use '.include "file"' instead of 'include 57# file'. Adjust the include line below if yours does. 58# 59# 2. Edit feature.h {{{1 60# Only if you do not agree with the default compile features, e.g.: 61# - you want Vim to be as vi compatible as it can be 62# - you want to use Emacs tags files 63# - you want right-to-left editing (Hebrew) 64# - you want 'langmap' support (Greek) 65# - you want to remove features to make Vim smaller 66# 67# 3. "make" {{{1 68# Will first run ./configure with the options in this file. Then it will 69# start make again on this Makefile to do the compiling. You can also do 70# this in two steps with: 71# make config 72# make 73# The configuration phase creates/overwrites auto/config.h and 74# auto/config.mk. 75# The configure script is created with "make autoconf". It can detect 76# different features of your system and act accordingly. However, it is 77# not correct for all systems. Check this: 78# - If you have X windows, but configure could not find it or reported 79# another include/library directory then you wanted to use, you have 80# to set CONF_OPT_X below. You might also check the installation of 81# xmkmf. 82# - If you have --enable-gui=motif and have Motif on your system, but 83# configure reports "checking for location of gui... <not found>", you 84# have to set GUI_INC_LOC and GUI_LIB_LOC below. 85# If you changed something, do this to run configure again: 86# make reconfig 87# 88# - If you do not trust the automatic configuration code, then inspect 89# auto/config.h and auto/config.mk, before starting the actual build 90# phase. If possible edit this Makefile, rather than auto/config.mk -- 91# especially look at the definition of VIMLOC below. Note that the 92# configure phase overwrites auto/config.mk and auto/config.h again. 93# - If you get error messages, find out what is wrong and try to correct 94# it in this Makefile. You may need to do "make reconfig" when you 95# change anything that configure uses (e.g. switching from an old C 96# compiler to an ANSI C compiler). Only when auto/configure does 97# something wrong you may need to change one of the other files. If 98# you find a clean way to fix the problem, consider sending a note to 99# the author of autoconf ([email protected]) or Vim 100# ([email protected]). Don't bother to do that when you made a hack 101# solution for a non-standard system. 102# 103# 4. "make test" {{{1 104# This is optional. This will run Vim scripts on a number of test 105# files, and compare the produced output with the expected output. 106# If all is well, you will get the "ALL DONE" message in the end. See 107# below (search for "/^test"). 108# 109# 5. "make install" {{{1 110# If the new Vim seems to be working OK you can install it and the 111# documentation in the appropriate location. The default is 112# "/usr/local". Change "prefix" below to change the location. 113# "auto/pathdef.c" will be compiled again after changing this to make 114# the executable know where the help files are located. 115# Note that any existing executable is removed or overwritten. If you 116# want to keep it you will have to make a backup copy first. 117# The runtime files are in a different directory for each version. You 118# might want to delete an older version. 119# If you don't want to install everything, there are other targets: 120# make installvim only installs Vim, not the tools 121# make installvimbin only installs the Vim executable 122# make installruntime only installs the Vim help and 123# runtime files 124# make installlinks only installs the Vim binary links 125# make installhelplinks only installs the Vim manpage links 126# make installmacros only installs the Vim macros 127# make installtutor only installs the Vim tutor 128# make installtools only installs xxd 129# If you install Vim, not to install for real but to prepare a package 130# or RPM, set DESTDIR to the root of the tree. 131# 132# 6. Use Vim until a new version comes out. {{{1 133# 134# 7. "make uninstall_runtime" {{{1 135# Will remove the runtime files for the current version. This is safe 136# to use while another version is being used, only version-specific 137# files will be deleted. 138# To remove the runtime files of another version: 139# make uninstall_runtime VIMRTDIR=/vim54 140# If you want to delete all installed files, use: 141# make uninstall 142# Note that this will delete files that have the same name for any 143# version, thus you might need to do a "make install" soon after this. 144# Be careful not to remove a version of Vim that is still being used! 145# To find out which files and directories will be deleted, use: 146# make -n uninstall 147# }}} 148# 149### This Makefile has been succesfully tested on many systems. {{{ 150### Only the ones that require special options are mentioned here. 151### Check the (*) column for remarks, listed below. 152### Later code changes may cause small problems, otherwise Vim is supposed to 153### compile and run without problems. 154 155#system: configurations: version (*) tested by: 156#------------- ------------------------ ------- - ---------- 157#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 158#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 159#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 160#AIX 4.2.1 cc 5.2k (C) Will Fiveash 161#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 162#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 163#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 164#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 165#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 166#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 167#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 168#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 169#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 170#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 171#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 172#Irix 6.4 cc ? 5.0m (S) Rick Sayre 173#Irix 6.5 cc ? 6.0 (S) David Harrison 174#Irix 64 bit 4.5 (K) Jon Wright 175#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 176#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 177#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 178#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 179#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 180#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 181#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 182#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 183#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 184#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 185#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 186#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 187#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 188#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 189#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 190#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 191#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 192#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 193#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 194#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 195#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden 196#Solaris with -lthread 5.5 (W) K. Nagano 197#Solaris gcc (b) Riccardo 198#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 199#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 200#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 201#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 202#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 203#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 204# }}} 205 206# (*) Remarks: {{{ 207# 208# (1) Uncomment line below for shlicc2 209# (2) HPUX with compile problems or wrong digraphs, uncomment line below 210# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 211# And add "-lXpm" to MOTIF_LIBS2. 212# (4) For cc the optimizer must be disabled (use CFLAGS= after running 213# configure) (symptom: ":set termcap" output looks weird). 214# (5) Compiler may need extra argument, see below. 215# (6) See below for a few lines to uncomment 216# (7) See below for lines which enable the use of clcc 217# (8) Needs some EXTRA_LIBS, search for Unisys below 218# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 219# (A) May need EXTRA_LIBS, see below 220# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 221# (C) Force the use of curses instead of termcap, see below. 222# (D) Uncomment lines below for QNX 223# (E) You might want to use termlib instead of termcap, see below. 224# (F) See below for instructions. 225# (G) Using ncursus version 4.2 has reported to cause a crash. Use the 226# Sun cursus library instead. 227# (H) See line for EXTRA_LIBS below. 228# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 229# (J) If you get undefined symbols, see below for a solution. 230# (K) See lines to uncomment below for machines with 64 bit pointers. 231# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 232# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 233# characters instead of one). 234# (N) SCO with decmouse. 235# (O) LynxOS needs EXTRA_LIBS, see below. 236# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 237# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 238# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 239# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 240# (T) See ../doc/os_beos.txt. 241# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 242# detection, since the configure script runs into an error when it 243# detects Python (probably because of the bash shell). 244# (V) See lines to uncomment below. 245# (X) Need to use the .include "auto/config.mk" line below 246# (Y) See line with c89 below 247# (Z) See lines with cc or c89 below 248# (a) See line with EXTRA_LIBS below. 249# (b) When using gcc with the Solaris linker, make sure you don't use GNU 250# strip, otherwise the binary may not run: "Cannot find ELF". 251# (x) When you get warnings for precompiled header files, run 252# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 253# }}} 254 255 256#DO NOT CHANGE the next line, we need it for configure to find the compiler 257#instead of using the default from the "make" program. 258#Use a line further down to change the value for CC. 259CC= 260 261# Change and use these defines if configure cannot find your Motif stuff. 262# Unfortunately there is no "standard" location for Motif. {{{ 263# These defines can contain a single directory (recommended) or a list of 264# directories (for when you are working with several systems). The LAST 265# directory that exists is used. 266# When changed, run "make reconfig" next! 267#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 268#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 269### Use these two lines for Infomagic Motif (3) 270#GUI_INC_LOC = -I/usr/X11R6/include 271#GUI_LIB_LOC = -L/usr/X11R6/lib 272# }}} 273 274######################## auto/config.mk ######################## {{{1 275# At this position auto/config.mk is included. When starting from the 276# distribution it is almost empty. After running auto/configure it contains 277# settings that have been discovered for your system. Settings below this 278# include override settings in auto/config.mk! 279 280# Note: if auto/config.mk is lost somehow (e.g., because configure was 281# interrupted), create an empty auto/config.mk file and do "make config". 282 283# (X) How to include auto/config.mk depends on the version of "make" you have, 284# if the current choice doesn't work, try the other one. 285 286include auto/config.mk 287#.include "auto/config.mk" 288CClink = $(CC) 289 290#}}} 291 292# Include the configuration choices first, so we can override everything 293# below. As shipped, this file contains a target that causes to run 294# configure. Once configure was run, this file contains a list of 295# make variables with predefined values instead. Thus any second invocation 296# of make, will buid Vim. 297 298# CONFIGURE - configure arguments {{{1 299# You can give a lot of options to configure. 300# Change this to your desire and do 'make config' afterwards 301 302# examples (can only use one!): 303#CONF_ARGS = --exec-prefix=/usr 304#CONF_ARGS = --with-vim-name=vim6 --with-ex-name=ex6 --with-view-name=view6 305#CONF_ARGS = --with-global-runtime=/etc/vim 306 307# Use this one if you distribute a modified version of Vim. 308#CONF_ARGS = --with-modified-by="John Doe" 309 310# GUI - For creating Vim with GUI (gvim) (B) 311# Uncomment this line when you don't want to get the GUI version, although you 312# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 313# at all. 314#CONF_OPT_GUI = --disable-gui 315 316# Uncomment one of these lines if you have that GUI but don't want to use it. 317# The automatic check will use another one that can be found 318# Gnome is disabled by default, it may cause trouble. 319#CONF_OPT_GUI = --disable-gtk-check 320#CONF_OPT_GUI = --disable-gtk2-check 321#CONF_OPT_GUI = --enable-gnome-check 322#CONF_OPT_GUI = --enable-gnome2-check 323#CONF_OPT_GUI = --disable-motif-check 324#CONF_OPT_GUI = --disable-athena-check 325#CONF_OPT_GUI = --disable-nextaw-check 326 327# Uncomment one of these lines to select a specific GUI to use. 328# When using "yes" or nothing, configure will use the first one found: GTK+, 329# Motif or Athena. 330# 331# GTK versions that are known not to work 100% are rejected. 332# Use "--disable-gtktest" to accept them anyway. 333# 334# GNOME means GTK with Gnome support. If using GTK, then GNOME will 335# automatically be used if it is found. If you have GNOME, but do not want to 336# use it (e.g., want a GTK-only version), then use --enable-gui=gtk. 337# 338# If the selected GUI isn't found, the GUI is disabled automatically 339#CONF_OPT_GUI = --enable-gui=gtk 340#CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest 341#CONF_OPT_GUI = --enable-gui=gtk2 342#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 343#CONF_OPT_GUI = --enable-gui=gnome 344#CONF_OPT_GUI = --enable-gui=gnome2 345#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 346#CONF_OPT_GUI = --enable-gui=kde 347#CONF_OPT_GUI = --enable-gui=motif 348#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 349#CONF_OPT_GUI = --enable-gui=athena 350#CONF_OPT_GUI = --enable-gui=nextaw 351 352# DARWIN - detecting Mac OS X 353# Uncomment this line when you want to compile a Unix version of Vim on 354# Darwin. None of the Mac specific options or files will be used. 355#CONF_OPT_DARWIN = --disable-darwin 356 357# PERL 358# Uncomment this when you want to include the Perl interface. 359# The Perl option sometimes causes problems, because it adds extra flags 360# to the command line. If you see strange flags during compilation, check in 361# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 362# the next line. 363# When you get an error for a missing "perl.exp" file, try creating an emtpy 364# one: "touch perl.exp". 365# This requires at least "small" features, "tiny" doesn't work. 366#CONF_OPT_PERL = --enable-perlinterp 367 368# PYTHON 369# Uncomment this when you want to include the Python interface. 370#CONF_OPT_PYTHON = --enable-pythoninterp 371 372# TCL 373# Uncomment this when you want to include the Tcl interface. 374#CONF_OPT_TCL = --enable-tclinterp 375 376# RUBY 377# Uncomment this when you want to include the Ruby interface. 378#CONF_OPT_RUBY = --enable-rubyinterp 379 380# MZSCHEME 381# Uncomment this when you want to include the MzScheme interface. 382#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 383# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 384#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 385#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 386#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 387 388# CSCOPE 389# Uncomment this when you want to include the Cscope interface. 390#CONF_OPT_CSCOPE = --enable-cscope 391 392# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 393#CONF_OPT_WORKSHOP = --enable-workshop 394 395# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 396# Motif version must have XPM libraries (see |workshop-xpm|). 397# Uncomment this when you do not want the netbeans interface. 398#CONF_OPT_NETBEANS = --disable-netbeans 399 400# SNIFF - Include support for SNiFF+. 401#CONF_OPT_SNIFF = --enable-sniff 402 403# MULTIBYTE - To edit multi-byte characters. 404# Uncomment this when you want to edit a multibyte language. 405# It's automatically enabled with big features or IME support. 406# Note: Compile on a machine where setlocale() actually works, otherwise the 407# configure tests may fail. 408#CONF_OPT_MULTIBYTE = --enable-multibyte 409 410# NLS - National Language Support 411# Uncomment this when you do not want to support translated messages, even 412# though configure can find support for it. 413#CONF_OPT_NLS = --disable-nls 414 415# XIM - X Input Method. Special character input support for X11 (chinese, 416# japanese, special symbols, etc). Also needed for dead-key support. 417# When omitted it's automatically enabled for the X-windows GUI. 418# HANGUL - Input Hangul (korean) language using internal routines. 419# Uncomment one of these when you want to input a multibyte language. 420#CONF_OPT_INPUT = --enable-xim 421#CONF_OPT_INPUT = --disable-xim 422#CONF_OPT_INPUT = --enable-hangulinput 423 424# FONTSET - X fontset support for output of languages with many characters. 425# Uncomment this when you want to output a multibyte language. 426#CONF_OPT_OUTPUT = --enable-fontset 427 428# ACL - Uncomment this when you do not want to include ACL support, even 429# though your system does support it. E.g., when it's buggy. 430#CONF_OPT_ACL = --disable-acl 431 432# gpm - For mouse support on Linux console via gpm 433# Uncomment this when you do not want to include gpm support, even 434# though you have gpm libraries and includes 435#CONF_OPT_GPM = --disable-gpm 436 437# FEATURES - For creating Vim with more or less features 438# Uncomment one of these lines when you want to include few to many features. 439# The default is "normal". 440#CONF_OPT_FEAT = --with-features=tiny 441#CONF_OPT_FEAT = --with-features=small 442#CONF_OPT_FEAT = --with-features=normal 443#CONF_OPT_FEAT = --with-features=big 444#CONF_OPT_FEAT = --with-features=huge 445 446# COMPILED BY - For including a specific e-mail address for ":version". 447#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 448 449# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 450# (otherwise Vim configure will try to include xterm titlebar access) 451# Also disable the GUI above, otherwise it will be included anyway. 452# When both GUI and X11 have been disabled this may save about 15% of the 453# code and make Vim startup quicker. 454#CONF_OPT_X = --without-x 455 456# X WINDOWS DIRECTORY - specify X directories 457# If configure can't find you X stuff, or if you have multiple X11 derivates 458# installed, you may wish to specify which one to use. 459# Select nothing to let configure choose. 460# This here selects openwin (as found on sun). 461#XROOT = /usr/openwin 462#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 463 464# X11 Session Management Protocol support 465# Vim will try to use XSMP to catch the user logging out if there are unsaved 466# files. Uncomment this line to disable that (it prevents vim trying to open 467# communications with the session manager). 468#CONF_OPT_XSMP = --disable-xsmp 469 470# You may wish to include xsmp but use exclude xsmp-interact if the logout 471# XSMP functionality does not work well with your session-manager (at time of 472# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 473# applications after Vim has cancelled a logout (until Vim quits). This 474# *might* be the Vim code, but is more likely a bug in early GNOME-1. 475# This disables the dialog that asks you if you want to save files or not. 476#CONF_OPT_XSMP = --disable-xsmp-interact 477 478# COMPILER - Name of the compiler {{{1 479# The default from configure will mostly be fine, no need to change this, just 480# an example. If a compiler is defined here, configure will use it rather than 481# probing for one. It is dangerous to change this after configure was run. 482# Make will use your choice then -- but beware: Many things may change with 483# another compiler. It is wise to run 'make reconfig' to start all over 484# again. 485#CC = cc 486#CC = gcc 487 488# COMPILER FLAGS - change as you please. Either before running {{{1 489# configure or afterwards. For examples see below. 490# When using -g with some older versions of Linux you might get a 491# statically linked executable. 492# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 493#CFLAGS = -g 494#CFLAGS = -O 495 496# Optimization limits - depends on the compiler. Automatic check in configure 497# doesn't work very well, because many compilers only give a warning for 498# unrecognized arguments. 499#CFLAGS = -O -OPT:Olimit=2600 500#CFLAGS = -O -Olimit 2000 501#CFLAGS = -O -FOlimit,2000 502 503# Often used for GCC: mixed optimizing, lot of optimizing, debugging 504#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 505#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 506#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 507#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 508#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 509 510# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 511# allocated memory (and makes every malloc()/free() very slow). 512# Electric Fence is free (search ftp sites). 513# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 514# as root: sysctl -w vm.max_proc_mmap=30000 515#EXTRA_LIBS = /usr/local/lib/libefence.a 516 517# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 518#PURIFY = purify 519# }}} 520 521# LINT - for running lint 522LINT_OPTIONS = -beprxzF 523 524# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 525# Might not work with GUI or Perl. 526# Need to recompile everything after changing this: "make clean" "make". 527#PROFILE_CFLAGS = -pg -g 528#PROFILE_LIBS = -pg 529 530##################################################### 531### Specific systems, check if yours is listed! ### {{{ 532##################################################### 533 534### Uncomment things here only if the values chosen by configure are wrong. 535### It's better to adjust configure.in and "make autoconf", if you can! 536### Then send the required changes to configure.in to the bugs list. 537 538### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 539### 540#CC = shlicc2 541#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 542 543### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 544### The first probably works on all systems 545### The second should work a bit better on newer systems 546### The third should work a bit better on HPUX 11.11 547### Information provided by: Richard Allen <[email protected]> 548#CC = c89 -D_HPUX_SOURCE 549#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 550#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 551 552### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 553### when the default (ISO) digraphs look completely wrong. 554### After changing this do "touch digraph.c; make". 555#EXTRA_DEFS = -DHPUX_DIGRAPHS 556 557### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 558### is too small to compile many routines. It produces too much defining 559### and no space errors. 560### Uncomment the following to specify a larger macro definition table. 561#CFLAGS = -Wp,-H256000 562 563### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 564### libraries in /usr/lib instead of /lib (avoiding transition links). 565### Information provided by: David Green 566#XROOT = /usr 567#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 568#GUI_INC_LOC = -I/usr/include/Motif1.2 569#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 570 571### (5) AIX 4.1.4 with cc 572#CFLAGS = -O -qmaxmem=8192 573 574### AIX with c89 (Walter Briscoe) 575#CC = c89 576#CPPFLAGS = -D_ALL_SOURCE 577 578### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 579# needed to avoid a problem where strings.h gets included 580#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 581 582### (W) Solaris with multi-threaded libraries (-lthread): 583### If suspending doesn't work properly, try using this line: 584#EXTRA_DEFS = -D_REENTRANT 585 586### (7) Solaris 2.4/2.5 with Centerline compiler 587#CC = clcc 588#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 589#CFLAGS = -O 590 591### (9) Solaris 2.x with cc (SunPro), using Athena. 592### Only required for compiling gui_at_sb.c. 593### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 594### Use one of the lines (either Full ANSI or no ANSI at all) 595#CFLAGS = $(CFLAGS) -Xc 596#CFLAGS = $(CFLAGS) -Xs 597 598### Solaris 2.3 with X11 and specific cc 599#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 600 601### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 602#CC = /usr/ucb/cc 603#EXTRA_LIBS = -R/usr/ucblib 604 605### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 606# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 607#CC = cc 608#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 609#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 610#XPM_IPATH = -I$(XPM_DIR)/include 611#EXTRA_LIBS = $(XPM_LIB) 612#EXTRA_IPATHS = $(XPM_IPATH) 613#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 614 615### Solaris with workshop compilers: Vim is unstable when compiled with 616# "-fast". Use this instead. (Shea Martin) 617#CFLAGS = -x02 -xtarget=ultra 618 619### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 620#LDFLAGS = -lw -ldl -lXmu 621#GUI_LIB_LOC = -L/usr/local/lib 622 623### (8) Unisys 6035 (Glauber Ribeiro) 624#EXTRA_LIBS = -lnsl -lsocket -lgen 625 626### When builtin functions cause problems with gcc (for Sun 4.1.x) 627#CFLAGS = -O2 -Wall -traditional -Wno-implicit 628 629### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 630#EXTRA_DEFS = -DDOMAIN 631#CFLAGS= -O -A systype,bsd4.3 632 633### Coherent 4.2.10 on Intel 386 platform 634#EXTRA_DEFS = -Dvoid=int 635#EXTRA_LIBS = -lterm -lsocket 636 637### SCO 3.2, with different library name for terminfo 638#EXTRA_LIBS = -ltinfo 639 640### UTS2 for Amdahl UTS 2.1.x 641#EXTRA_DEFS = -DUTS2 642#EXTRA_LIBS = -lsocket 643 644### UTS4 for Amdahl UTS 4.x 645#EXTRA_DEFS = -DUTS4 -Xa 646 647### USL for Unix Systems Laboratories (SYSV 4.2) 648#EXTRA_DEFS = -DUSL 649 650### RISCos on MIPS without X11 651#EXTRA_DEFS = -DMIPS 652 653### RISCos on MIPS with X11 654#EXTRA_LIBS = -lsun 655 656### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 657#CC= gcc -D_POSIX_SOURCE 658#CFLAGS= -O2 659#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 660 661### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 662### Also use the CONF_TERM_LIB below! 663#EXTRA_LIBS = -lgen 664 665### (D) QNX (by G.F. Desrochers) 666#CFLAGS = -g -O -mf -4 667 668### (F) QNX (by John Oleynick) 669# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 670# CONF_OPT_X = --without-x. 671# 2. make config 672# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 673# have -ldir (does config find it somewhere?) and -ltermcap has at 674# least one problem so I use termlib.o instead. The problem with 675# termcap is that it segfaults if you call it with the name of 676# a non-existent terminal type. 677# 4. edit auto/config.h and add #define USE_TMPNAM 678# 5. add termlib.o to OBJ 679# 6. make 680 681### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 682#EXTRA_LIBS = -lgen 683 684### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 685#EXTRA_LIBS = -lgen -lnsl 686### For SINIX-Y this is needed for the right prototype of gettimeofday() 687#EXTRA_DEFS = -D_XPG_IV 688 689### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 690# Use both "-F O3" lines for optimization or the "-g" line for debugging 691#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 692#CFLAGS = -F O3 -DSINIXN 693#LDFLAGS = -F O3 694#CFLAGS = -g -DSINIXN 695 696### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 697#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 698#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 699 700### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 701#GUI_INC_LOC = -I/usr/include 702#GUI_LIB_LOC = -L/usr/lib 703#EXTRA_LIBS = -lgen 704 705### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 706#GUI_INC_LOC = -I/usr/necccs/include 707#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 708#XROOT = /usr/necccs 709#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 710#EXTRA_LIBS = -lsocket -lgen 711 712### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 713# Not needed for Irix 5.3, Ives Aerts reported 714#EXTRA_LIBS = -lmalloc -lc_s 715# Irix 4.0, when regexp and regcmp cannot be found when linking: 716#EXTRA_LIBS = -lmalloc -lc_s -lPW 717 718### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 719# Note: This newer option style is used with the MipsPro compilers ONLY if 720# you are compiling an "n32" or "64" ABI binary (use either a -n32 721# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 722# then the CFLAGS option format will be the typical style (i.e. 723# -Olimit 3000). 724#CFLAGS = -OPT:Olimit=3000 -O 725 726### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 727# compiler features! Beware, the optimization is EXTREMELY thorough 728# and takes quite a long time. 729# Note: See the note above. Here, the -mips3 option automatically 730# enables either the "n32" or "64" ABI, depending on what machine you 731# are compiling on (n32 is explicitly enabled here, just to make sure). 732#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 733#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 734 735### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 736### Suggested by Jon Wright <[email protected]>. 737### Tested on R8000 IRIX6.1 Power Indigo2. 738### Check /etc/compiler.defaults for your compiler settings. 739# either (for 64 bit pointers) uncomment the following line 740#GUI_LIB_LOC = -L/usr/lib64 741# then 742# 1) make config 743# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 744# 3) make 745# 746# or (for 32bit pointers) uncomment the following line 747#EXTRA_DEFS = -n32 748#GUI_LIB_LOC = -L/usr/lib32 749# then 750# 1) make config 751# 2) edit auto/config.mk, add -n32 to LDFLAGS 752# 3) make 753### 754 755### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 756### which is found by configure, doesn't work correctly. Symptom is the 757### error message "Termcap entry too long". Uncomment the next line. 758### On AIX 4.2.1 (and other versions probably), libtermcap is reported 759### not to display properly. 760### after changing this, you need to do "make reconfig". 761#CONF_TERM_LIB = --with-tlib=curses 762 763### (E) If you want to use termlib library instead of the automatically found 764### one. After changing this, you need to do "make reconfig". 765#CONF_TERM_LIB = --with-tlib=termlib 766 767### (a) ESIX V4.2 (Reinhard Wobst) 768#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 769 770### If you want to use ncurses library instead of the automatically found one 771### after changing this, you need to do "make reconfig". 772#CONF_TERM_LIB = --with-tlib=ncurses 773 774### For GCC on MSDOS, the ".exe" suffix will be added. 775#EXEEXT = .exe 776#LNKEXT = .exe 777 778### (O) For LynxOS 2.5.0, tested on PC. 779#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 780### For LynxOS 3.0.1, tested on PPC 781#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 782### For LynxOS 3.1.0, tested on PC 783#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 784 785 786### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 787### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 788#CFLAGS = -O -Qtarget=m88110compat 789#EXTRA_LIBS = -lgen 790 791##################### end of system specific lines ################### }}} 792 793### Names of the programs and targets {{{1 794VIMTARGET = $(VIMNAME)$(EXEEXT) 795EXTARGET = $(EXNAME)$(LNKEXT) 796VIEWTARGET = $(VIEWNAME)$(LNKEXT) 797GVIMNAME = g$(VIMNAME) 798GVIMTARGET = $(GVIMNAME)$(LNKEXT) 799GVIEWNAME = g$(VIEWNAME) 800GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 801RVIMNAME = r$(VIMNAME) 802RVIMTARGET = $(RVIMNAME)$(LNKEXT) 803RVIEWNAME = r$(VIEWNAME) 804RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 805RGVIMNAME = r$(GVIMNAME) 806RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 807RGVIEWNAME = r$(GVIEWNAME) 808RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 809VIMDIFFNAME = $(VIMNAME)diff 810GVIMDIFFNAME = g$(VIMDIFFNAME) 811VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 812GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 813EVIMNAME = e$(VIMNAME) 814EVIMTARGET = $(EVIMNAME)$(LNKEXT) 815EVIEWNAME = e$(VIEWNAME) 816EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 817 818### Names of the tools that are also made {{{1 819TOOLS = xxd/xxd$(EXEEXT) 820 821### Installation directories. The defaults come from configure. {{{1 822# 823### prefix the top directory for the data (default "/usr/local") 824# 825# Uncomment the next line to install Vim in your home directory. 826#prefix = $(HOME) 827 828### exec_prefix is the top directory for the executable (default $(prefix)) 829# 830# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 831#exec_prefix = /usr/machine 832 833### BINDIR dir for the executable (default "$(exec_prefix)/bin") 834### MANDIR dir for the manual pages (default "$(prefix)/man") 835### DATADIR dir for the other files (default "$(prefix)/lib" or 836# "$(prefix)/share") 837# They may be different when using different architectures for the 838# executable and a common directory for the other files. 839# 840# Uncomment the next line to install Vim in "/usr/bin" 841#BINDIR = /usr/bin 842# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 843#MANDIR = /usr/share/man 844# Uncomment the next line to install Vim help files in "/usr/share/vim" 845#DATADIR = /usr/share 846 847### DESTDIR root of the installation tree. This is prepended to the other 848# directories. This directory must exist. 849#DESTDIR = ~/pkg/vim 850 851### Location of man pages 852MANSUBDIR = $(MANDIR)/man1 853 854### Location of Vim files (should not need to be changed, and {{{1 855### some things might not work when they are changed!) 856VIMDIR = /vim 857VIMRTDIR = /vim70aa 858HELPSUBDIR = /doc 859COLSUBDIR = /colors 860SYNSUBDIR = /syntax 861INDSUBDIR = /indent 862PLUGSUBDIR = /plugin 863FTPLUGSUBDIR = /ftplugin 864LANGSUBDIR = /lang 865COMPSUBDIR = /compiler 866KMAPSUBDIR = /keymap 867MACROSUBDIR = /macros 868TOOLSSUBDIR = /tools 869TUTORSUBDIR = /tutor 870PRINTSUBDIR = /print 871PODIR = po 872 873### VIMLOC common root of the Vim files (all versions) 874### VIMRTLOC common root of the runtime Vim files (this version) 875### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 876### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 877### HELPSUBLOC location for help files 878### COLSUBLOC location for colorscheme files 879### SYNSUBLOC location for syntax files 880### INDSUBLOC location for indent files 881### PLUGSUBLOC location for standard plugin files 882### FTPLUGSUBLOC location for ftplugin files 883### LANGSUBLOC location for language files 884### COMPSUBLOC location for compiler files 885### KMAPSUBLOC location for keymap files 886### MACROSUBLOC location for macro files 887### TOOLSSUBLOC location for tools files 888### TUTORSUBLOC location for tutor files 889### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 890### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 891### You can override these if you want to install them somewhere else. 892### Edit feature.h for compile-time settings. 893VIMLOC = $(DATADIR)$(VIMDIR) 894VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 895VIMRCLOC = $(VIMLOC) 896HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 897COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 898SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 899INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 900PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 901FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 902LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 903COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 904KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 905MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 906TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 907TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 908PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 909SCRIPTLOC = $(VIMRTLOC) 910 911### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 912### the runtime directory is not below it. 913#VIMRUNTIMEDIR = $(VIMRTLOC) 914 915### Name of the evim file target. 916EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 917MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 918 919### Name of the menu file target. 920SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 921SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 922SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 923 924### Name of the bugreport file target. 925SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 926 927### Name of the file type detection file target. 928SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 929 930### Name of the file type detection file target. 931SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 932 933### Name of the file type detection script file target. 934SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 935 936### Name of the ftplugin-on file target. 937SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 938 939### Name of the ftplugin-off file target. 940SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 941 942### Name of the indent-on file target. 943SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 944 945### Name of the indent-off file target. 946SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 947 948### Name of the option window script file target. 949SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 950 951# Program to install the program in the target directory. Could also be "mv". 952INSTALL_PROG = cp 953 954# Program to install the data in the target directory. Cannot be "mv"! 955INSTALL_DATA = cp 956INSTALL_DATA_R = cp -r 957 958### Program to run on installed binary 959#STRIP = strip 960 961### Permissions for binaries {{{1 962BINMOD = 755 963 964### Permissions for man page 965MANMOD = 644 966 967### Permissions for help files 968HELPMOD = 644 969 970### Permissions for Perl and shell scripts 971SCRIPTMOD = 755 972 973### Permission for Vim script files (menu.vim, bugreport.vim, ..) 974VIMSCRIPTMOD = 644 975 976### Permissions for all directories that are created 977DIRMOD = 755 978 979### Permissions for all other files that are created 980FILEMOD = 644 981 982# Where to copy the man and help files from 983HELPSOURCE = ../runtime/doc 984 985# Where to copy the script files from (menu, bugreport) 986SCRIPTSOURCE = ../runtime 987 988# Where to copy the colorscheme files from 989COLSOURCE = ../runtime/colors 990 991# Where to copy the syntax files from 992SYNSOURCE = ../runtime/syntax 993 994# Where to copy the indent files from 995INDSOURCE = ../runtime/indent 996 997# Where to copy the standard plugin files from 998PLUGSOURCE = ../runtime/plugin 999 1000# Where to copy the ftplugin files from 1001FTPLUGSOURCE = ../runtime/ftplugin 1002 1003# Where to copy the macro files from 1004MACROSOURCE = ../runtime/macros 1005 1006# Where to copy the tools files from 1007TOOLSSOURCE = ../runtime/tools 1008 1009# Where to copy the tutor files from 1010TUTORSOURCE = ../runtime/tutor 1011 1012# Where to look for language specific files 1013LANGSOURCE = ../runtime/lang 1014 1015# Where to look for compiler files 1016COMPSOURCE = ../runtime/compiler 1017 1018# Where to look for keymap files 1019KMAPSOURCE = ../runtime/keymap 1020 1021# Where to look for print resource files 1022PRINTSOURCE = ../runtime/print 1023 1024# If you are using Linux, you might want to use this to make vim the 1025# default vi editor, it will create a link from vi to Vim when doing 1026# "make install". An existing file will be overwritten! 1027# When not using it, some make programs can't handle an undefined $(LINKIT). 1028#LINKIT = -ln -f -s $(BINDIR)/$(VIMTARGET) /usr/bin/vi 1029LINKIT = @echo >/dev/null 1030 1031### 1032### GRAPHICAL USER INTERFACE (GUI). {{{1 1033### 'configure --enable-gui' can enable one of these for you if you did set 1034### a corresponding CONF_OPT_GUI above and have X11. 1035### Override configures choice by uncommenting all the following lines. 1036### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1037### for enabling the Athena or Motif GUI. 1038#GUI_SRC = $(NONE_SRC) 1039#GUI_OBJ = $(NONE_OBJ) 1040#GUI_DEFS = $(NONE_DEFS) 1041#GUI_IPATH = $(NONE_IPATH) 1042#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1043#GUI_LIBS1 = $(NONE_LIBS1) 1044#GUI_LIBS2 = $(NONE_LIBS2) 1045#GUI_INSTALL = $(NONE_INSTALL) 1046#GUI_TARGETS = $(NONE_TARGETS) 1047#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1048#GUI_TESTTARGET = $(NONE_TESTTARGET) 1049 1050# Without a GUI install the normal way. 1051NONE_INSTALL = install_normal 1052 1053### KDE GUI interface. 1054KDE_DIR = $(KDE_PREFIX) 1055KDE_INCL = gui.h 1056KDE_SRC = gui.c pty.c gui_kde.cc gui_kde_x11.cc gui_kde_widget.cc gui_kde_widget_moc.cc kvim_iface_skel.cc 1057KDE_OBJ = objects/gui.o objects/pty.o objects/gui_kde.o objects/gui_kde_x11.o \ 1058 objects/gui_kde_widget.o objects/gui_kde_widget_moc.o \ 1059 objects/kvim_iface_skel.o 1060KDE_DEFS = -DFEAT_GUI_KDE $(NARROW_PROTO) 1061KDE_IPATH = $(GUI_INC_LOC) 1062KDE_LIBS_DIR = $(GUI_LIB_LOC) 1063KDE_LIBS1 = 1064KDE_LIBS2 = $(KDE_LIBNAME) 1065KDE_INSTALL = install_normal 1066KDE_TARGETS = installklinks installkdeicons 1067KDE_MAN_TARGETS = 1068KDE_TESTTARGET = gui 1069 1070#for KDE rename files to avoid confusion with gvim for GTK 1071KVIMNAME = k$(VIMNAME) 1072KVIMTARGET = $(KVIMNAME)$(LNKEXT) 1073KVIEWNAME = k$(VIEWNAME) 1074KVIEWTARGET = $(KVIEWNAME)$(LNKEXT) 1075RKVIMNAME = r$(KVIMNAME) 1076RKVIMTARGET = $(RKVIMNAME)$(LNKEXT) 1077RKVIEWNAME = r$(KVIEWNAME) 1078RKVIEWTARGET = $(RKVIEWNAME)$(LNKEXT) 1079KVIMDIFFNAME = k$(VIMDIFFNAME) 1080KVIMDIFFTARGET = $(KVIMDIFFNAME)$(LNKEXT) 1081 1082### GTK GUI 1083GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1084 gui_beval.c 1085GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1086 objects/pty.o objects/gui_gtk_f.o \ 1087 objects/gui_beval.o 1088GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1089GTK_IPATH = $(GUI_INC_LOC) 1090GTK_LIBS_DIR = $(GUI_LIB_LOC) 1091GTK_LIBS1 = 1092GTK_LIBS2 = $(GTK_LIBNAME) 1093GTK_INSTALL = install_normal 1094GTK_TARGETS = installglinks 1095GTK_MAN_TARGETS = installghelplinks 1096GTK_TESTTARGET = gui 1097 1098### Motif GUI 1099MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c 1100MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1101 objects/pty.o objects/gui_beval.o 1102MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1103MOTIF_IPATH = $(GUI_INC_LOC) 1104MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1105MOTIF_LIBS1 = 1106MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1107MOTIF_INSTALL = install_normal 1108MOTIF_TARGETS = installglinks 1109MOTIF_MAN_TARGETS = installghelplinks 1110MOTIF_TESTTARGET = gui 1111 1112### Athena GUI 1113### Use Xaw3d to make the menus look a little bit nicer 1114#XAW_LIB = -lXaw3d 1115XAW_LIB = -lXaw 1116 1117### When using Xaw3d, uncomment/comment the following lines to also get the 1118### scrollbars from Xaw3d. 1119#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1120#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1121# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1122#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1123# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1124# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1125ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1126 gui_at_sb.c gui_at_fs.c 1127ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1128 objects/pty.o objects/gui_beval.o \ 1129 objects/gui_at_sb.o objects/gui_at_fs.o 1130ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1131 1132ATHENA_IPATH = $(GUI_INC_LOC) 1133ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1134ATHENA_LIBS1 = $(XAW_LIB) 1135ATHENA_LIBS2 = -lXt 1136ATHENA_INSTALL = install_normal 1137ATHENA_TARGETS = installglinks 1138ATHENA_MAN_TARGETS = installghelplinks 1139ATHENA_TESTTARGET = gui 1140 1141### neXtaw GUI 1142NEXTAW_LIB = -lneXtaw 1143 1144NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1145NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1146 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1147NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1148 1149NEXTAW_IPATH = $(GUI_INC_LOC) 1150NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1151NEXTAW_LIBS1 = $(NEXTAW_LIB) 1152NEXTAW_LIBS2 = -lXt 1153NEXTAW_INSTALL = install_normal 1154NEXTAW_TARGETS = installglinks 1155NEXTAW_MAN_TARGETS = installghelplinks 1156NEXTAW_TESTTARGET = gui 1157 1158### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1159# errors: ld: Undefined symbol 1160# _get_wmShellWidgetClass 1161# _get_applicationShellWidgetClass 1162# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1163# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1164#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1165# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1166# too: 1167#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1168 1169### BeOS GUI 1170BEOSGUI_SRC = gui.c gui_beos.cc pty.c 1171BEOSGUI_OBJ = objects/gui.o objects/gui_beos.o objects/pty.o 1172BEOSGUI_DEFS = -DFEAT_GUI_BEOS 1173BEOSGUI_IPATH = 1174BEOSGUI_LIBS_DIR = 1175BEOSGUI_LIBS1 = -lbe -lroot 1176BEOSGUI_LIBS2 = 1177BEOSGUI_INSTALL = install_normal 1178BEOSGUI_TARGETS = installglinks 1179BEOSGUI_MAN_TARGETS = installghelplinks 1180BEOSGUI_TESTTARGET = gui 1181 1182# PHOTON GUI 1183PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1184PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1185PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1186PHOTONGUI_IPATH = 1187PHOTONGUI_LIBS_DIR = 1188PHOTONGUI_LIBS1 = -lph -lphexlib 1189PHOTONGUI_LIBS2 = 1190PHOTONGUI_INSTALL = install_normal 1191PHOTONGUI_TARGETS = installglinks 1192PHOTONGUI_MAN_TARGETS = installghelplinks 1193PHOTONGUI_TESTTARGET = gui 1194 1195# CARBON GUI 1196CARBONGUI_SRC = gui.c gui_mac.c 1197CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1198CARBONGUI_DEFS = -DFEAT_GUI_MAC -arch ppc -fno-common -fpascal-strings \ 1199 -Wall -Wno-unknown-pragmas \ 1200 -mdynamic-no-pic -pipe 1201CARBONGUI_IPATH = -I. -Iproto 1202CARBONGUI_LIBS_DIR = 1203CARBONGUI_LIBS1 = -framework Carbon 1204CARBONGUI_LIBS2 = 1205CARBONGUI_INSTALL = install_macosx 1206CARBONGUI_TARGETS = 1207CARBONGUI_MAN_TARGETS = 1208CARBONGUI_TESTTARGET = 1209 1210# All GUI files 1211ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c gui_kde.cc gui_kde_widget.cc gui_kde_x11.cc gui_kde_widget_moc.cc 1212ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_amiga.pro gui_photon.pro gui_kde.pro gui_kde_x11.pro 1213 1214# }}} 1215 1216### Command to create dependencies based on #include "..." 1217### prototype headers are ignored due to -DPROTO, system 1218### headers #include <...> are ignored if we use the -MM option, as 1219### e.g. provided by gcc-cpp. 1220### Include FEAT_GUI to get gependency on gui.h 1221CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) $(DEPEND_CFLAGS) 1222 1223# flags for cproto 1224# This is for cproto 3 patchlevel 8 or below 1225# __inline, __attribute__ and __extension__ are not recognized by cproto 1226NO_ATTR = -D__inline= -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" -D__extension__= \ 1227-D__restrict="" -D__gnuc_va_list=char -D__builtin_va_list=char 1228 1229# 1230# This is for cproto 3 patchlevel 9 or above (currently 4.6) 1231# __inline and __attribute__ are now recognized by cproto 1232# -D"foo()=" is not supported by all compilers so do not use it 1233# NO_ATTR= 1234# 1235# maybe the "/usr/bin/cc -E" has to be adjusted for some systems 1236# This is for cproto 3.5 patchlevel 3: 1237# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1238# 1239# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1240# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1241# 1242# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1243PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1244 1245 1246################################################ 1247## no changes required below this line ## 1248################################################ 1249 1250SHELL = /bin/sh 1251 1252.SUFFIXES: 1253.SUFFIXES: .cc .c .o .pro 1254 1255PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1256POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS) 1257 1258ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS) 1259 1260LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca 1261 1262DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1263 1264PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS) 1265 1266ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1267ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS) 1268 1269# abbreviations 1270DEST_BIN = $(DESTDIR)$(BINDIR) 1271DEST_VIM = $(DESTDIR)$(VIMLOC) 1272DEST_RT = $(DESTDIR)$(VIMRTLOC) 1273DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1274DEST_COL = $(DESTDIR)$(COLSUBLOC) 1275DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1276DEST_IND = $(DESTDIR)$(INDSUBLOC) 1277DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1278DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1279DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1280DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1281DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1282DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1283DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1284DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1285DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1286DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1287DEST_MAN = $(DESTDIR)$(MANSUBDIR) 1288 1289# BASIC_SRC: files that are always used 1290# GUI_SRC: extra GUI files for current configuration 1291# ALL_GUI_SRC: all GUI files for Unix 1292# 1293# SRC: files used for current configuration 1294# TAGS_SRC: source files used for make tags 1295# TAGS_INCL: include files used for make tags 1296# ALL_SRC: source files used for make depend and make lint 1297 1298TAGS_INCL = *.h 1299 1300BASIC_SRC = \ 1301 buffer.c \ 1302 charset.c \ 1303 diff.c \ 1304 digraph.c \ 1305 edit.c \ 1306 eval.c \ 1307 ex_cmds.c \ 1308 ex_cmds2.c \ 1309 ex_docmd.c \ 1310 ex_eval.c \ 1311 ex_getln.c \ 1312 fileio.c \ 1313 fold.c \ 1314 getchar.c \ 1315 if_cscope.c \ 1316 if_xcmdsrv.c \ 1317 main.c \ 1318 mark.c \ 1319 memfile.c \ 1320 memline.c \ 1321 menu.c \ 1322 message.c \ 1323 misc1.c \ 1324 misc2.c \ 1325 move.c \ 1326 mbyte.c \ 1327 normal.c \ 1328 ops.c \ 1329 option.c \ 1330 os_unix.c \ 1331 auto/pathdef.c \ 1332 quickfix.c \ 1333 regexp.c \ 1334 screen.c \ 1335 search.c \ 1336 syntax.c \ 1337 tag.c \ 1338 term.c \ 1339 ui.c \ 1340 undo.c \ 1341 version.c \ 1342 window.c \ 1343 $(OS_EXTRA_SRC) 1344 1345SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \ 1346 $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \ 1347 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) 1348 1349TAGS_SRC = *.c *.cpp *.cc if_perl.xs 1350 1351EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1352 if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \ 1353 workshop.c wsdebug.c integration.c netbeans.c 1354 1355# All sources, also the ones that are not configured 1356ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC) 1357 1358# Which files to check with lint. Select one of these three lines. ALL_SRC 1359# checks more, but may not work well for checking a GUI that wasn't configured. 1360# The perl sources also don't work well with lint. 1361LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \ 1362 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1363#LINT_SRC = $(SRC) 1364#LINT_SRC = $(ALL_SRC) 1365 1366OBJ = \ 1367 objects/buffer.o \ 1368 objects/charset.o \ 1369 objects/diff.o \ 1370 objects/digraph.o \ 1371 objects/edit.o \ 1372 objects/eval.o \ 1373 objects/ex_cmds.o \ 1374 objects/ex_cmds2.o \ 1375 objects/ex_docmd.o \ 1376 objects/ex_eval.o \ 1377 objects/ex_getln.o \ 1378 objects/fileio.o \ 1379 objects/fold.o \ 1380 objects/getchar.o \ 1381 $(HANGULIN_OBJ) \ 1382 objects/if_cscope.o \ 1383 objects/if_xcmdsrv.o \ 1384 objects/main.o \ 1385 objects/mark.o \ 1386 objects/memfile.o \ 1387 objects/memline.o \ 1388 objects/menu.o \ 1389 objects/message.o \ 1390 objects/misc1.o \ 1391 objects/misc2.o \ 1392 objects/move.o \ 1393 objects/mbyte.o \ 1394 objects/normal.o \ 1395 objects/ops.o \ 1396 objects/option.o \ 1397 objects/os_unix.o \ 1398 objects/pathdef.o \ 1399 objects/quickfix.o \ 1400 objects/regexp.o \ 1401 objects/screen.o \ 1402 objects/search.o \ 1403 objects/syntax.o \ 1404 $(SNIFF_OBJ) \ 1405 objects/tag.o \ 1406 objects/term.o \ 1407 objects/ui.o \ 1408 objects/undo.o \ 1409 objects/window.o \ 1410 $(GUI_OBJ) \ 1411 $(MZSCHEME_OBJ) \ 1412 $(PERL_OBJ) \ 1413 $(PYTHON_OBJ) \ 1414 $(TCL_OBJ) \ 1415 $(RUBY_OBJ) \ 1416 $(OS_EXTRA_OBJ) \ 1417 $(WORKSHOP_OBJ) \ 1418 $(NETBEANS_OBJ) \ 1419 $(WSDEBUG_OBJ) 1420 1421PRO_AUTO = \ 1422 buffer.pro \ 1423 charset.pro \ 1424 diff.pro \ 1425 digraph.pro \ 1426 edit.pro \ 1427 eval.pro \ 1428 ex_cmds.pro \ 1429 ex_cmds2.pro \ 1430 ex_docmd.pro \ 1431 ex_eval.pro \ 1432 ex_getln.pro \ 1433 fileio.pro \ 1434 fold.pro \ 1435 getchar.pro \ 1436 hangulin.pro \ 1437 if_cscope.pro \ 1438 if_xcmdsrv.pro \ 1439 if_python.pro \ 1440 if_ruby.pro \ 1441 main.pro \ 1442 mark.pro \ 1443 memfile.pro \ 1444 memline.pro \ 1445 menu.pro \ 1446 message.pro \ 1447 misc1.pro \ 1448 misc2.pro \ 1449 move.pro \ 1450 mbyte.pro \ 1451 normal.pro \ 1452 ops.pro \ 1453 option.pro \ 1454 os_unix.pro \ 1455 quickfix.pro \ 1456 regexp.pro \ 1457 screen.pro \ 1458 search.pro \ 1459 syntax.pro \ 1460 tag.pro \ 1461 term.pro \ 1462 termlib.pro \ 1463 ui.pro \ 1464 undo.pro \ 1465 version.pro \ 1466 window.pro \ 1467 gui_beval.pro \ 1468 workshop.pro \ 1469 netbeans.pro \ 1470 $(ALL_GUI_PRO) \ 1471 $(TCL_PRO) 1472 1473PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1474 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO) 1475 1476# Default target is making the executable and tools 1477all: $(VIMTARGET) $(TOOLS) languages 1478 1479tools: $(TOOLS) 1480 1481# Run configure with all the setting from above. 1482# 1483# Note: auto/config.h doesn't depend on configure, because running configure 1484# doesn't always update auto/config.h. The timestamp isn't changed if the 1485# file contents didn't change (to avoid recompiling everything). Including a 1486# dependency on auto/config.h would cause running configure each time when 1487# auto/config.h isn't updated. The dependency on auto/config.mk should make 1488# sure configure is run when it's needed. 1489# 1490config auto/config.mk: auto/configure config.mk.in config.h.in 1491 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1492 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1493 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1494 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1495 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \ 1496 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1497 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1498 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1499 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1500 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1501 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) 1502 1503# Use "make reconfig" to rerun configure without cached values. 1504# When config.h changes, most things will be recompiled automatically. 1505# Invoke $(MAKE) to run config with the empty auto/config.mk. 1506# Invoke $(MAKE) to build all with the filled auto/config.mk. 1507reconfig: scratch clean 1508 $(MAKE) -f Makefile config 1509 $(MAKE) -f Makefile all 1510 1511# Run autoconf to produce auto/configure. 1512# Note: 1513# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1514# producing auto/configure. 1515# - autoconf is not run automatically, because a patch usually changes both 1516# configure.in and auto/configure but can't update the timestamps. People 1517# who do not have (the correct version of) autoconf would run into trouble. 1518# 1519# Two tricks are required to make autoconf put its output in the "auto" dir: 1520# - Temporarily move the ./configure script to ./configure.save. Don't 1521# overwrite it, it's probably the result of an aborted autoconf. 1522# - Use sed to change ./config.log to auto/config.log in the configure script. 1523autoconf: 1524 if test ! -f configure.save; then mv configure configure.save; fi 1525 autoconf 1526 sed -e 's+\./config.log+auto/config.log+' configure > auto/configure 1527 chmod 755 auto/configure 1528 mv -f configure.save configure 1529 -rm -f auto/config.status auto/config.cache 1530 1531# Re-execute this Makefile to include the new auto/config.mk produced by 1532# configure Only used when typing "make" with a fresh auto/config.mk. 1533myself: 1534 $(MAKE) -f Makefile all 1535 1536 1537# The normal command to compile a .c file to its .o file. 1538CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1539 1540 1541# Link the target for normal use or debugging. 1542# A shell script is used to try linking without unneccesary libraries. 1543$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1544 $(CCC) version.c -o objects/version.o 1545 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1546 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \ 1547 MAKE="$(MAKE)" sh $(srcdir)/link.sh 1548 1549xxd/xxd$(EXEEXT): xxd/xxd.c 1550 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \ 1551 $(MAKE) -f Makefile 1552 1553# Build the language specific files if they were unpacked. 1554# Generate the converted .mo files separately, it's no problem if this fails. 1555languages: 1556 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1557 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1558 fi 1559 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1560 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1561 fi 1562 1563# Update the *.po files for changes in the sources. Only run manually. 1564update-po: 1565 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1566 1567# Generate function prototypes. This is not needed to compile vim, but if 1568# you want to use it, cproto is out there on the net somewhere -- Webb 1569# 1570# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1571# few include files that can not be found, that's OK. 1572 1573proto: $(PRO_AUTO) $(PRO_MANUAL) 1574 1575### Would be nice if this would work for "normal" make. 1576### Currently it only works for (Free)BSD make. 1577#$(PRO_AUTO): $$(*F).c 1578# cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@ 1579 1580# Always define FEAT_GUI. This may generate a few warnings if it's also 1581# defined in auto/config.h, you can ignore that. 1582.c.pro: 1583 cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@ 1584 echo "/* vim: set ft=c : */" >> proto/$@ 1585 1586os_amiga.pro: os_amiga.c 1587 cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1588 echo "/* vim: set ft=c : */" >> proto/$@ 1589 1590os_msdos.pro: os_msdos.c 1591 cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1592 echo "/* vim: set ft=c : */" >> proto/$@ 1593 1594os_win16.pro: os_win16.c 1595 cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1596 echo "/* vim: set ft=c : */" >> proto/$@ 1597 1598os_win32.pro: os_win32.c 1599 cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1600 echo "/* vim: set ft=c : */" >> proto/$@ 1601 1602os_mswin.pro: os_mswin.c 1603 cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1604 echo "/* vim: set ft=c : */" >> proto/$@ 1605 1606os_beos.pro: os_beos.c 1607 cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1608 echo "/* vim: set ft=c : */" >> proto/$@ 1609 1610os_vms.pro: os_vms.c 1611# must use os_vms_conf.h for auto/config.h 1612 mv auto/config.h auto/config.h.save 1613 cp os_vms_conf.h auto/config.h 1614 cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1615 echo "/* vim: set ft=c : */" >> proto/$@ 1616 rm auto/config.h 1617 mv auto/config.h.save auto/config.h 1618 1619# if_perl.pro is special: Use the generated if_perl.c for input and remove 1620# prototypes for local functions. 1621if_perl.pro: auto/if_perl.c 1622 cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1623 1624 1625notags: 1626 -rm -f tags 1627 1628# Note: tags is made for the currently configured version, can't include both 1629# Motif and Athena GUI 1630# You can ignore error messages for missing files. 1631tags TAGS: notags 1632 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1633 1634# Make a highlight file for types. Requires Exuberant ctags and awk 1635types: types.vim 1636types.vim: $(TAGS_SRC) $(TAGS_INCL) 1637 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1638 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1639 {printf("%s ", $$1)}END{print ""}' > $@ 1640 1641# Execute the test scripts. Run these after compiling Vim, before installing. 1642# This doesn't depend on $(VIMTARGET), because that won't work when configure 1643# wasn't run yet. Restart make to build it instead. 1644# 1645# This will produce a lot of garbage on your screen, including a few error 1646# messages. Don't worry about that. 1647# If there is a real error, there will be a difference between "test.out" and 1648# a "test99.ok" file. 1649# If everything is allright, the final message will be "ALL DONE". 1650# 1651test check: 1652 $(MAKE) -f Makefile $(VIMTARGET) 1653 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) 1654 1655testclean: 1656 cd testdir; $(MAKE) -f Makefile clean 1657 1658# 1659# Avoid overwriting an existing executable, somebody might be running it and 1660# overwriting it could cause it to crash. Deleting it is OK, it won't be 1661# really deleted until all running processes for it have exited. It is 1662# renamed first, in case the deleting doesn't work. 1663# 1664# If you want to keep an older version, rename it before running "make 1665# install". 1666# 1667install: $(GUI_INSTALL) 1668 1669install_normal: installvim installtools install-languages install-icons 1670 1671installvim: installvimbin installruntime installlinks installhelplinks installmacros installtutor 1672 1673installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1674 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1675 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1676 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1677 fi 1678 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1679 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1680 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1681# may create a link to the new executable from /usr/bin/vi 1682 -$(LINKIT) 1683 1684# install the help files; first adjust the contents for the location 1685installruntime: $(HELPSOURCE)/vim.1 $(DEST_MAN) $(DEST_VIM) $(DEST_RT) \ 1686 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1687 $(DEST_FTP) $(DEST_PLUG) $(DEST_TUTOR) $(DEST_COMP) 1688 @echo generating $(DEST_MAN)/$(VIMNAME).1 1689 @sed -e s+/usr/local/lib/vim+$(VIMLOC)+ \ 1690 -e s+$(VIMLOC)/doc+$(HELPSUBLOC)+ \ 1691 -e s+$(VIMLOC)/syntax+$(SYNSUBLOC)+ \ 1692 -e s+$(VIMLOC)/tutor+$(TUTORSUBLOC)+ \ 1693 -e s+$(VIMLOC)/vimrc+$(VIMRCLOC)/vimrc+ \ 1694 -e s+$(VIMLOC)/gvimrc+$(VIMRCLOC)/gvimrc+ \ 1695 -e s+$(VIMLOC)/menu.vim+$(SCRIPTLOC)/menu.vim+ \ 1696 -e s+$(VIMLOC)/bugreport.vim+$(SCRIPTLOC)/bugreport.vim+ \ 1697 -e s+$(VIMLOC)/filetype.vim+$(SCRIPTLOC)/filetype.vim+ \ 1698 -e s+$(VIMLOC)/ftoff.vim+$(SCRIPTLOC)/ftoff.vim+ \ 1699 -e s+$(VIMLOC)/scripts.vim+$(SCRIPTLOC)/scripts.vim+ \ 1700 -e s+$(VIMLOC)/optwin.vim+$(SCRIPTLOC)/optwin.vim+ \ 1701 -e 's+$(VIMLOC)/\*.ps+$(SCRIPTLOC)/\*.ps+' \ 1702 $(HELPSOURCE)/vim.1 > $(DEST_MAN)/$(VIMNAME).1 1703 chmod $(MANMOD) $(DEST_MAN)/$(VIMNAME).1 1704 @echo generating $(DEST_MAN)/$(VIMNAME)tutor.1 1705 @sed -e s+/usr/local/lib/vim+$(VIMLOC)+ \ 1706 -e s+$(VIMLOC)/tutor+$(TUTORSUBLOC)+ \ 1707 $(HELPSOURCE)/vimtutor.1 > $(DEST_MAN)/$(VIMNAME)tutor.1 1708 chmod $(MANMOD) $(DEST_MAN)/$(VIMNAME)tutor.1 1709 $(INSTALL_DATA) $(HELPSOURCE)/vimdiff.1 $(DEST_MAN)/$(VIMDIFFNAME).1 1710 chmod $(MANMOD) $(DEST_MAN)/$(VIMDIFFNAME).1 1711 @echo generating $(DEST_MAN)/$(EVIMNAME).1 1712 @sed -e s+/usr/local/lib/vim+$(SCRIPTLOC)+ \ 1713 $(HELPSOURCE)/evim.1 > $(DEST_MAN)/$(EVIMNAME).1 1714 chmod $(MANMOD) $(DEST_MAN)/$(EVIMNAME).1 1715 @echo generating help tags 1716# Generate the help tags with ":helptags" to handle all languages. 1717 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1718 cd $(HELPSOURCE); \ 1719 files=`ls *.txt tags`; \ 1720 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1721 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1722 cd $(DEST_HELP); \ 1723 chmod $(HELPMOD) $$files 1724 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1725 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1726# install the menu files 1727 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1728 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1729 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1730 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1731 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1732 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1733# install the evim file 1734 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1735 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1736 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1737 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1738# install the bugreport file 1739 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1740 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1741# install the example vimrc files 1742 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 1743 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 1744 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 1745 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 1746# install the file type detection files 1747 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 1748 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 1749 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 1750 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 1751 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 1752 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 1753 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 1754 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 1755 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 1756 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 1757 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 1758 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 1759 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 1760 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 1761 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 1762 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 1763# install the print resource files 1764 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 1765 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 1766# install the colorscheme files 1767 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 1768 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 1769# install the syntax files 1770 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 1771 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 1772# install the indent files 1773 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 1774 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 1775# install the standard plugin files 1776 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 1777 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 1778# install the ftplugin files 1779 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP) 1780 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 1781# install the compiler files 1782 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 1783 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 1784 1785installmacros: $(MACROSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 1786 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 1787 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 1788 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 1789 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 1790# When using CVS some CVS directories might have been copied. 1791 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \ 1792 if test -n "$$cvs"; then \ 1793 rm -rf $$cvs; \ 1794 fi 1795 1796# install the tutor files 1797installtutor: $(TUTORSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TUTOR) 1798 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 1799 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 1800 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 1801 chmod $(HELPMOD) $(DEST_TUTOR)/* 1802 1803# install helper program xxd 1804installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) $(DEST_MAN) \ 1805 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) 1806 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 1807 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 1808 rm -f $(DEST_BIN)/xxd.rm; \ 1809 fi 1810 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 1811 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 1812 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 1813 $(INSTALL_DATA) $(HELPSOURCE)/xxd.1 $(DEST_MAN) 1814 chmod $(MANMOD) $(DEST_MAN)/xxd.1 1815# install the runtime tools 1816 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 1817# When using CVS some CVS directories might have been copied. 1818 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 1819 if test -n "$$cvs"; then \ 1820 rm -rf $$cvs; \ 1821 fi 1822 -chmod $(FILEMOD) $(DEST_TOOLS)/* 1823# replace the path in some tools 1824 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 1825 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1826 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1827 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 1828 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 1829 1830# install the language specific files, if they were unpacked 1831install-languages: languages $(DEST_LANG) $(DEST_KMAP) 1832 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1833 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 1834 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 1835 fi 1836 if test -d $(LANGSOURCE); then \ 1837 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 1838 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 1839 fi 1840 if test -d $(KMAPSOURCE); then \ 1841 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 1842 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 1843 fi 1844 1845# install the icons for KDE, if the directory exists and the icon doesn't. 1846# doesn't.<=looks strange to install icons to user's directory ;), i add my 1847# own install procedure, mikmak 1848installkdeicons: 1849 mkdir -p $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/ 1850 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/ 1851 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/ 1852 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/ 1853 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/ 1854 mkdir -p $(DESTDIR)$(KDE_DIR)/share/apps/kvim 1855 1856 cp ../runtime/KVim.desktop $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/ && chmod 644 $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/KVim.desktop 1857 cp ../runtime/kvim32x32.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png 1858 cp ../runtime/kvim48x48.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png 1859 cp ../runtime/hi16-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/hi16-action-make.png 1860 cp ../runtime/hi22-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/hi22-action-make.png 1861 cp ../runtime/kde-tips $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips && chmod 644 $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips 1862 1863ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 1864ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 1865ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 1866KDEPATH = $(HOME)/.kde/share/icons 1867install-icons: 1868 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 1869 -a ! -f $(ICON48PATH)/gvim.png; then \ 1870 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 1871 fi 1872 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 1873 -a ! -f $(ICON32PATH)/gvim.png; then \ 1874 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 1875 fi 1876 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 1877 -a ! -f $(ICON16PATH)/gvim.png; then \ 1878 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 1879 fi 1880 1881 1882$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 1883 @echo Runtime files not found. 1884 @echo You need to unpack the runtime archive before running "make install". 1885 test -f error 1886 1887$(DESTDIR)$(exec_prefix) $(DEST_BIN) $(DEST_MAN) $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 1888 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 1889 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 1890 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_PLUG): 1891 -$(SHELL) ./mkinstalldirs $@ 1892 -chmod $(DIRMOD) $@ 1893 1894# create links from various names to vim. This is only done when the links 1895# (or executables with the same name) don't exist yet. 1896installlinks: $(GUI_TARGETS) \ 1897 $(DEST_BIN)/$(EXTARGET) \ 1898 $(DEST_BIN)/$(VIEWTARGET) \ 1899 $(DEST_BIN)/$(RVIMTARGET) \ 1900 $(DEST_BIN)/$(RVIEWTARGET) \ 1901 $(INSTALLVIMDIFF) 1902 1903installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 1904 $(DEST_BIN)/$(GVIEWTARGET) \ 1905 $(DEST_BIN)/$(RGVIMTARGET) \ 1906 $(DEST_BIN)/$(RGVIEWTARGET) \ 1907 $(DEST_BIN)/$(EVIMTARGET) \ 1908 $(DEST_BIN)/$(EVIEWTARGET) \ 1909 $(INSTALLGVIMDIFF) 1910 1911installklinks: $(DEST_BIN)/$(KVIMTARGET) \ 1912 $(DEST_BIN)/$(KVIEWTARGET) \ 1913 $(DEST_BIN)/$(RKVIMTARGET) \ 1914 $(DEST_BIN)/$(RKVIEWTARGET) \ 1915 $(DEST_BIN)/$(EVIMTARGET) \ 1916 $(DEST_BIN)/$(EVIEWTARGET) \ 1917 installkvimdiff 1918 1919installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 1920installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 1921installkvimdiff: $(DEST_BIN)/$(KVIMDIFFTARGET) 1922 1923$(DEST_BIN)/$(EXTARGET): 1924 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 1925 1926$(DEST_BIN)/$(VIEWTARGET): 1927 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 1928 1929$(DEST_BIN)/$(GVIMTARGET): 1930 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 1931 1932$(DEST_BIN)/$(GVIEWTARGET): 1933 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 1934 1935$(DEST_BIN)/$(KVIMTARGET): 1936 cd $(DEST_BIN); ln -s $(VIMTARGET) $(KVIMTARGET) 1937 1938$(DEST_BIN)/$(KVIEWTARGET): 1939 cd $(DEST_BIN); ln -s $(VIMTARGET) $(KVIEWTARGET) 1940 1941$(DEST_BIN)/$(RVIMTARGET): 1942 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 1943 1944$(DEST_BIN)/$(RVIEWTARGET): 1945 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 1946 1947$(DEST_BIN)/$(RGVIMTARGET): 1948 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 1949 1950$(DEST_BIN)/$(RGVIEWTARGET): 1951 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 1952 1953$(DEST_BIN)/$(RKVIMTARGET): 1954 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RKVIMTARGET) 1955 1956$(DEST_BIN)/$(RKVIEWTARGET): 1957 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RKVIEWTARGET) 1958 1959$(DEST_BIN)/$(VIMDIFFTARGET): 1960 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 1961 1962$(DEST_BIN)/$(GVIMDIFFTARGET): 1963 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 1964 1965$(DEST_BIN)/$(KVIMDIFFTARGET): 1966 cd $(DEST_BIN); ln -s $(VIMTARGET) $(KVIMDIFFTARGET) 1967 1968$(DEST_BIN)/$(EVIMTARGET): 1969 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 1970 1971$(DEST_BIN)/$(EVIEWTARGET): 1972 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 1973 1974# create links for the manual pages with various names to vim. This is only 1975# done when the links (or manpages with the same name) don't exist yet. 1976installhelplinks: $(GUI_MAN_TARGETS) \ 1977 $(DEST_MAN)/$(EXNAME).1 \ 1978 $(DEST_MAN)/$(VIEWNAME).1 \ 1979 $(DEST_MAN)/$(RVIMNAME).1 \ 1980 $(DEST_MAN)/$(RVIEWNAME).1 1981 1982installghelplinks installkhelplinks : $(DEST_MAN)/$(GVIMNAME).1 \ 1983 $(DEST_MAN)/$(GVIEWNAME).1 \ 1984 $(DEST_MAN)/$(RGVIMNAME).1 \ 1985 $(DEST_MAN)/$(RGVIEWNAME).1 \ 1986 $(DEST_MAN)/$(GVIMDIFFNAME).1 \ 1987 $(DEST_MAN)/$(EVIEWNAME).1 1988 1989$(DEST_MAN)/$(EXNAME).1: 1990 cd $(DEST_MAN); ln -s $(VIMNAME).1 $(EXNAME).1 1991 1992$(DEST_MAN)/$(VIEWNAME).1: 1993 cd $(DEST_MAN); ln -s $(VIMNAME).1 $(VIEWNAME).1 1994 1995$(DEST_MAN)/$(GVIMNAME).1: 1996 cd $(DEST_MAN); ln -s $(VIMNAME).1 $(GVIMNAME).1 1997 1998$(DEST_MAN)/$(GVIEWNAME).1: 1999 cd $(DEST_MAN); ln -s $(VIMNAME).1 $(GVIEWNAME).1 2000 2001$(DEST_MAN)/$(RVIMNAME).1: 2002 cd $(DEST_MAN); ln -s $(VIMNAME).1 $(RVIMNAME).1 2003 2004$(DEST_MAN)/$(RVIEWNAME).1: 2005 cd $(DEST_MAN); ln -s $(VIMNAME).1 $(RVIEWNAME).1 2006 2007$(DEST_MAN)/$(RGVIMNAME).1: 2008 cd $(DEST_MAN); ln -s $(VIMNAME).1 $(RGVIMNAME).1 2009 2010$(DEST_MAN)/$(RGVIEWNAME).1: 2011 cd $(DEST_MAN); ln -s $(VIMNAME).1 $(RGVIEWNAME).1 2012 2013$(DEST_MAN)/$(GVIMDIFFNAME).1: 2014 cd $(DEST_MAN); ln -s $(VIMDIFFNAME).1 $(GVIMDIFFNAME).1 2015 2016$(DEST_MAN)/$(EVIEWNAME).1: 2017 cd $(DEST_MAN); ln -s $(EVIMNAME).1 $(EVIEWNAME).1 2018 2019uninstall: uninstall_runtime 2020 -rm -f $(DEST_BIN)/$(VIMTARGET) 2021 -rm -f $(DEST_MAN)/$(VIMNAME).1 $(DEST_MAN)/$(VIMNAME)tutor.1 2022 -rm -f $(DEST_BIN)/vimtutor 2023 -rm -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_MAN)/xxd.1 2024 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2025 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2026 -rm -f $(DEST_BIN)/$(KVIMTARGET) $(DEST_BIN)/$(KVIEWTARGET) 2027 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2028 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2029 -rm -f $(DEST_BIN)/$(RKVIMTARGET) $(DEST_BIN)/$(RKVIEWTARGET) 2030 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2031 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(KVIMDIFFTARGET) 2032 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2033 -rm -f $(DEST_MAN)/$(EXNAME).1 $(DEST_MAN)/$(VIEWNAME).1 2034 -rm -f $(DEST_MAN)/$(GVIMNAME).1 $(DEST_MAN)/$(GVIEWNAME).1 2035 -rm -f $(DEST_MAN)/$(RVIMNAME).1 $(DEST_MAN)/$(RVIEWNAME).1 2036 -rm -f $(DEST_MAN)/$(RGVIMNAME).1 $(DEST_MAN)/$(RGVIEWNAME).1 2037 -rm -f $(DEST_MAN)/$(VIMDIFFNAME).1 $(DEST_MAN)/$(GVIMDIFFNAME).1 2038 -rm -f $(DEST_MAN)/$(EVIMNAME).1 $(DEST_MAN)/$(EVIEWNAME).1 2039 2040# Note: the "rmdir" will fail if any files were added after "make install" 2041uninstall_runtime: 2042 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2043 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2044 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2045 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2046 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2047 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2048 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2049 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2050 -rm -f $(SYS_OPTWIN_FILE) 2051 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2052 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2053 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2054 -rm -rf $(DEST_MACRO) 2055 -rm -rf $(DEST_TUTOR) 2056 -rm -rf $(DEST_TOOLS) 2057 -rm -rf $(DEST_LANG) 2058 -rm -rf $(DEST_KMAP) 2059 -rm -rf $(DEST_COMP) 2060 -rm -f $(DEST_PRINT)/*.ps 2061 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2062 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt 2063 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2064 -rmdir $(DEST_FTP) $(DEST_PLUG) $(DEST_RT) 2065# This will fail when other Vim versions are installed, no worries. 2066 -rmdir $(DEST_VIM) 2067 2068# Clean up all the files that have been produced, except configure's. 2069# We support common typing mistakes for Juergen! :-) 2070clean celan: testclean 2071 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) xxd/*.o 2072 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2073 -rm -f conftest* *~ auto/link.sed 2074 -rm -f gui_kde_widget_moc.cc kvim_iface_skel.cc *.kidl 2075 if test -d $(PODIR); then \ 2076 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2077 fi 2078 2079# Make a shadow directory for compilation on another system or with different 2080# features. 2081SHADOWDIR = shadow 2082 2083shadow: runtime pixmaps 2084 mkdir $(SHADOWDIR) 2085 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../vimtutor ../mkinstalldirs . 2086 mkdir $(SHADOWDIR)/auto 2087 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2088 cd $(SHADOWDIR); rm -f auto/link.sed 2089 cp Makefile configure $(SHADOWDIR) 2090 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2091 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2092 cp config.mk.dist $(SHADOWDIR) 2093 mkdir $(SHADOWDIR)/xxd 2094 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2095 mkdir $(SHADOWDIR)/testdir 2096 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2097 ../../testdir/vimrc.unix \ 2098 ../../testdir/*.in \ 2099 ../../testdir/unix.vim \ 2100 ../../testdir/*.ok . 2101 2102# Link needed for doing "make install" in a shadow directory. 2103runtime: 2104 -ln -s ../runtime . 2105 2106# Link needed for doing "make" using GTK in a shadow directory. 2107pixmaps: 2108 -ln -s ../pixmaps . 2109 2110# Update the synmenu.vim file with the latest Syntax menu. 2111# This is only needed when runtime/makemenu.vim was changed. 2112menu: ./vim ../runtime/makemenu.vim 2113 ./vim -u ../runtime/makemenu.vim 2114 2115# Start configure from scratch 2116scrub scratch: 2117 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2118 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2119 touch auto/config.h 2120 cp config.mk.dist auto/config.mk 2121 2122distclean: clean scratch 2123 -rm -f tags 2124 2125dist: distclean 2126 @echo 2127 @echo Making the distribution has to be done in the top directory 2128 2129mdepend: 2130 -@rm -f Makefile~ 2131 cp Makefile Makefile~ 2132 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2133 @for i in $(ALL_SRC) ; do \ 2134 echo "$$i" ; \ 2135 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2136 $(CPP) $$i |\ 2137 grep '^# .*"\./.*\.h"' |\ 2138 sort -t'"' -u +1 -2 |\ 2139 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2140 ` >> tmp_make ; \ 2141 done 2142 mv tmp_make Makefile 2143 2144depend: 2145 -@rm -f Makefile~ 2146 cp Makefile Makefile~ 2147 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2148 -for i in $(ALL_SRC); do echo $$i; \ 2149 $(CPP_DEPEND) $$i | \ 2150 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2151 mv tmp_make Makefile 2152 2153lint: 2154 lint $(LINT_OPTIONS) $(LINT_CFLAGS) -DUSE_SNIFF -DHANGUL_INPUT $(LINT_SRC) 2155 2156# Check dosinst.c with lint. 2157lintinstall: 2158 lint $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2159 2160########################################################################### 2161 2162.c.o: 2163 $(CCC) $< 2164 2165.cc.o: 2166 $(CCC) $< 2167 2168auto/if_perl.c: if_perl.xs 2169 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2170 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \ 2171 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2172 2173auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2174 CC="$(CC) $(ALL_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2175 2176QUOTESED = sed -e 's/"/\\"/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 2177auto/pathdef.c: Makefile auto/config.mk 2178 -@echo creating $@ 2179 -@echo '/* pathdef.c */' > $@ 2180 -@echo '/* This file is automatically created by Makefile' >> $@ 2181 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2182 -@echo '#include "vim.h"' >> $@ 2183 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2184 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2185 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2186 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2187 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2188 -@if test -n "$(COMPILEDBY)"; then \ 2189 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2190 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2191 -@echo '";' >> $@ 2192 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2193 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2194 -@echo '";' >> $@ 2195 -@sh $(srcdir)/pathdef.sh 2196 2197# All the object files are put in the "objects" directory. Since not all make 2198# commands understand putting object files in another directory, it must be 2199# specified for each file separately. 2200 2201objects: 2202 mkdir objects 2203 2204objects/buffer.o: buffer.c 2205 $(CCC) -o $@ buffer.c 2206 2207objects/charset.o: charset.c 2208 $(CCC) -o $@ charset.c 2209 2210objects/diff.o: diff.c 2211 $(CCC) -o $@ diff.c 2212 2213objects/digraph.o: digraph.c 2214 $(CCC) -o $@ digraph.c 2215 2216objects/edit.o: edit.c 2217 $(CCC) -o $@ edit.c 2218 2219objects/eval.o: eval.c 2220 $(CCC) -o $@ eval.c 2221 2222objects/ex_cmds.o: ex_cmds.c 2223 $(CCC) -o $@ ex_cmds.c 2224 2225objects/ex_cmds2.o: ex_cmds2.c 2226 $(CCC) -o $@ ex_cmds2.c 2227 2228objects/ex_docmd.o: ex_docmd.c 2229 $(CCC) -o $@ ex_docmd.c 2230 2231objects/ex_eval.o: ex_eval.c 2232 $(CCC) -o $@ ex_eval.c 2233 2234objects/ex_getln.o: ex_getln.c 2235 $(CCC) -o $@ ex_getln.c 2236 2237objects/fileio.o: fileio.c 2238 $(CCC) -o $@ fileio.c 2239 2240objects/fold.o: fold.c 2241 $(CCC) -o $@ fold.c 2242 2243objects/getchar.o: getchar.c 2244 $(CCC) -o $@ getchar.c 2245 2246objects/gui.o: gui.c 2247 $(CCC) -o $@ gui.c 2248 2249objects/gui_at_fs.o: gui_at_fs.c 2250 $(CCC) -o $@ gui_at_fs.c 2251 2252objects/gui_at_sb.o: gui_at_sb.c 2253 $(CCC) -o $@ gui_at_sb.c 2254 2255objects/gui_athena.o: gui_athena.c 2256 $(CCC) -o $@ gui_athena.c 2257 2258objects/gui_beos.o: gui_beos.cc 2259 $(CCC) -o $@ gui_beos.cc 2260 2261objects/gui_beval.o: gui_beval.c 2262 $(CCC) -o $@ gui_beval.c 2263 2264objects/gui_gtk.o: gui_gtk.c 2265 $(CCC) -o $@ gui_gtk.c 2266 2267objects/gui_gtk_f.o: gui_gtk_f.c 2268 $(CCC) -o $@ gui_gtk_f.c 2269 2270objects/gui_gtk_x11.o: gui_gtk_x11.c 2271 $(CCC) -o $@ gui_gtk_x11.c 2272 2273objects/gui_motif.o: gui_motif.c 2274 $(CCC) -o $@ gui_motif.c 2275 2276objects/gui_x11.o: gui_x11.c 2277 $(CCC) -o $@ gui_x11.c 2278 2279objects/gui_photon.o: gui_photon.c 2280 $(CCC) -o $@ gui_photon.c 2281 2282objects/gui_mac.o: gui_mac.c 2283 $(CCC) -o $@ gui_mac.c 2284 2285objects/hangulin.o: hangulin.c 2286 $(CCC) -o $@ hangulin.c 2287 2288objects/if_cscope.o: if_cscope.c 2289 $(CCC) -o $@ if_cscope.c 2290 2291objects/if_xcmdsrv.o: if_xcmdsrv.c 2292 $(CCC) -o $@ if_xcmdsrv.c 2293 2294objects/if_mzsch.o: if_mzsch.c 2295 $(CCC) -o $@ if_mzsch.c 2296 2297objects/if_perl.o: auto/if_perl.c 2298 $(CCC) -o $@ auto/if_perl.c 2299 2300objects/if_perlsfio.o: if_perlsfio.c 2301 $(CCC) -o $@ if_perlsfio.c 2302 2303objects/if_python.o: if_python.c 2304 $(CCC) -o $@ if_python.c 2305 2306objects/if_ruby.o: if_ruby.c 2307 $(CCC) -o $@ if_ruby.c 2308 2309objects/if_sniff.o: if_sniff.c 2310 $(CCC) -o $@ if_sniff.c 2311 2312objects/if_tcl.o: if_tcl.c 2313 $(CCC) -o $@ if_tcl.c 2314 2315objects/integration.o: integration.c 2316 $(CCC) -o $@ integration.c 2317 2318objects/main.o: main.c 2319 $(CCC) -o $@ main.c 2320 2321objects/mark.o: mark.c 2322 $(CCC) -o $@ mark.c 2323 2324objects/memfile.o: memfile.c 2325 $(CCC) -o $@ memfile.c 2326 2327objects/memline.o: memline.c 2328 $(CCC) -o $@ memline.c 2329 2330objects/menu.o: menu.c 2331 $(CCC) -o $@ menu.c 2332 2333objects/message.o: message.c 2334 $(CCC) -o $@ message.c 2335 2336objects/misc1.o: misc1.c 2337 $(CCC) -o $@ misc1.c 2338 2339objects/misc2.o: misc2.c 2340 $(CCC) -o $@ misc2.c 2341 2342objects/move.o: move.c 2343 $(CCC) -o $@ move.c 2344 2345objects/mbyte.o: mbyte.c 2346 $(CCC) -o $@ mbyte.c 2347 2348objects/normal.o: normal.c 2349 $(CCC) -o $@ normal.c 2350 2351objects/ops.o: ops.c 2352 $(CCC) -o $@ ops.c 2353 2354objects/option.o: option.c 2355 $(CCC) -o $@ option.c 2356 2357objects/os_beos.o: os_beos.c 2358 $(CCC) -o $@ os_beos.c 2359 2360objects/os_qnx.o: os_qnx.c 2361 $(CCC) -o $@ os_qnx.c 2362 2363objects/os_macosx.o: os_macosx.c 2364 $(CCC) -o $@ os_macosx.c 2365 2366objects/os_unix.o: os_unix.c 2367 $(CCC) -o $@ os_unix.c 2368 2369objects/pathdef.o: auto/pathdef.c 2370 $(CCC) -o $@ auto/pathdef.c 2371 2372objects/py_config.o: $(PYTHON_CONFDIR)/config.c 2373 $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \ 2374 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2375 2376objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2377 $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2378 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2379 $(PYTHON_GETPATH_CFLAGS) 2380 2381objects/pty.o: pty.c 2382 $(CCC) -o $@ pty.c 2383 2384objects/quickfix.o: quickfix.c 2385 $(CCC) -o $@ quickfix.c 2386 2387objects/regexp.o: regexp.c 2388 $(CCC) -o $@ regexp.c 2389 2390objects/screen.o: screen.c 2391 $(CCC) -o $@ screen.c 2392 2393objects/search.o: search.c 2394 $(CCC) -o $@ search.c 2395 2396objects/syntax.o: syntax.c 2397 $(CCC) -o $@ syntax.c 2398 2399objects/tag.o: tag.c 2400 $(CCC) -o $@ tag.c 2401 2402objects/term.o: term.c 2403 $(CCC) -o $@ term.c 2404 2405objects/ui.o: ui.c 2406 $(CCC) -o $@ ui.c 2407 2408objects/undo.o: undo.c 2409 $(CCC) -o $@ undo.c 2410 2411objects/window.o: window.c 2412 $(CCC) -o $@ window.c 2413 2414objects/workshop.o: workshop.c 2415 $(CCC) -o $@ workshop.c 2416 2417objects/wsdebug.o: wsdebug.c 2418 $(CCC) -o $@ wsdebug.c 2419 2420objects/gui_kde.o: gui_kde.cc 2421 $(CCC) -o $@ gui_kde.cc 2422 2423objects/gui_kde_x11.o: gui_kde_x11.cc 2424 $(CCC) -o $@ gui_kde_x11.cc 2425 2426objects/gui_kde_widget.o: gui_kde_widget.cc 2427 $(MOC) -o gui_kde_widget_moc.cc gui_kde_widget.h 2428 $(KDE_DIR)/bin/dcopidl kvim_iface.h > kvim_iface.kidl || ( rm -f kvim_iface.kidl ; /bin/false ) 2429 $(KDE_DIR)/bin/dcopidl2cpp --c++-suffix cc --no-stub kvim_iface.kidl 2430 $(CCC) -o $@ gui_kde_widget.cc 2431 2432gui_kde_widget_moc.cc: objects/gui_kde_widget.o 2433objects/gui_kde_widget_moc.o: gui_kde_widget_moc.cc 2434 $(CCC) -o $@ gui_kde_widget_moc.cc 2435 2436kvim_iface_skel.cc: objects/gui_kde_widget.o 2437objects/kvim_iface_skel.o: kvim_iface_skel.cc 2438 $(CCC) -o $@ kvim_iface_skel.cc 2439 2440objects/netbeans.o: netbeans.c 2441 $(CCC) -o $@ netbeans.c 2442 2443Makefile: 2444 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2445 2446############################################################################### 2447### MacOS X installation 2448### 2449### This creates a runnable Vim.app in the src directory 2450 2451REZ = /Developer/Tools/Rez 2452APPDIR = $(VIMNAME).app 2453RESDIR = $(APPDIR)/Contents/Resources 2454# FIXME: i'm sure someone else can do something clever with grep 2455# sed and version.h here 2456VERSION = 7.0aa 2457 2458### Common flags 2459M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2460 -DAPP_VER=$(VERSION) -DICON_APP=$(ICON_APP) 2461 2462### Icons 2463ICON_APP = gui_mac.icns 2464ICONS = $(RESDIR)/$(ICON_APP) 2465 2466# If you uncomment the following lines the *.icns in the src directory will be 2467# detected by this Makefile automatically, and used for Vim. 2468#ICON_APP = $(shell if [ -e app.icns ] ; then echo app.icns ; else echo gui_mac.icns ; fi) 2469#ICON_DOC = $(shell if [ -e doc.icns ] ; then echo doc.icns ; else echo ; fi) 2470#ICON_DOCTXT = $(shell if [ -e doc-txt.icns ] ; then echo doc-txt.icns ; else echo ; fi) 2471#ICONS = $(addprefix $(RESDIR)/, $(ICON_APP) $(ICON_DOC) $(ICON_DOCTXT)) 2472 2473install_macosx: bundle-dir bundle-executable bundle-info bundle-resource \ 2474 bundle-language 2475 2476bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2477 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2478 cp -R ../runtime $(APPDIR) 2479 2480bundle-executable: $(VIMTARGET) 2481 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2482 2483bundle-info: bundle-dir 2484 @echo "Creating PkgInfo" 2485 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2486 @echo "Creating Info.plist" 2487 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2488 2489bundle-resource: bundle-dir bundle-icons bundle-rsrc 2490 2491bundle-icons: $(ICONS) 2492 2493### Classic resources 2494# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2495# This file is also required for OS X Vim. 2496bundle-rsrc: os_mac.rsr.hqx 2497 @echo "Creating resource fork" 2498 python dehqx.py $< 2499 rm -f gui_mac.rsrc 2500 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2501 2502# po/Make_osx.pl says something about generating a Mac message file 2503# for Ukrananian. Would somebody using Mac OS X in Ukranian 2504# *really* be upset that Carbon Vim was not localised in 2505# Ukranian? 2506# 2507#bundle-language: bundle-dir po/Make_osx.pl 2508# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2509bundle-language: bundle-dir 2510 2511$(APPDIR)/Contents: 2512 mkdir $(APPDIR) 2513 mkdir $(APPDIR)/Contents 2514 mkdir $(APPDIR)/Contents/MacOS 2515 mkdir $(RESDIR) 2516 mkdir $(RESDIR)/English.lproj 2517 2518$(RESDIR)/%.icns: %.icns 2519 cp $< $@ 2520 2521 2522############################################################################### 2523### (automatically generated by 'make depend') 2524### Dependencies: 2525objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h \ 2526 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2527 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2528 globals.h farsi.h arabic.h version.h 2529objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h \ 2530 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2531 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2532 globals.h farsi.h arabic.h 2533objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2534 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2535 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2536 arabic.h 2537objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h \ 2538 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2539 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2540 globals.h farsi.h arabic.h 2541objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2542 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2543 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2544 arabic.h 2545objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2546 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2547 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2548 arabic.h version.h 2549objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h \ 2550 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2551 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2552 globals.h farsi.h arabic.h version.h 2553objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2554 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2555 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2556 globals.h farsi.h arabic.h version.h 2557objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2558 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2559 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2560 globals.h farsi.h arabic.h 2561objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h \ 2562 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2563 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2564 globals.h farsi.h arabic.h 2565objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2566 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2567 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2568 globals.h farsi.h arabic.h 2569objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h \ 2570 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2571 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2572 globals.h farsi.h arabic.h 2573objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2574 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2575 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2576 arabic.h 2577objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h \ 2578 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2579 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2580 globals.h farsi.h arabic.h 2581objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2582 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2583 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2584 globals.h farsi.h arabic.h if_cscope.h 2585objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2586 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2587 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2588 globals.h farsi.h arabic.h version.h 2589objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2590 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2591 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2592 arabic.h farsi.c arabic.c 2593objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2594 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2595 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2596 arabic.h 2597objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h \ 2598 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2599 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2600 globals.h farsi.h arabic.h 2601objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h \ 2602 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2603 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2604 globals.h farsi.h arabic.h 2605objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2606 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2607 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2608 arabic.h 2609objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h \ 2610 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2611 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2612 globals.h farsi.h arabic.h 2613objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2614 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2615 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2616 arabic.h version.h 2617objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2618 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2619 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2620 arabic.h 2621objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2622 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2623 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2624 arabic.h 2625objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2626 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2627 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2628 arabic.h 2629objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h \ 2630 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2631 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2632 globals.h farsi.h arabic.h 2633objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2634 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2635 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2636 arabic.h 2637objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h \ 2638 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2639 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2640 globals.h farsi.h arabic.h 2641objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h \ 2642 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2643 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2644 globals.h farsi.h arabic.h os_unixx.h 2645objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 2646 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2647 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2648 globals.h farsi.h arabic.h 2649objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 2650 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2651 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2652 globals.h farsi.h arabic.h 2653objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h \ 2654 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2655 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2656 globals.h farsi.h arabic.h 2657objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h \ 2658 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2659 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2660 globals.h farsi.h arabic.h 2661objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h \ 2662 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2663 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2664 globals.h farsi.h arabic.h 2665objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h \ 2666 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2667 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2668 globals.h farsi.h arabic.h 2669objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2670 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2671 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2672 arabic.h 2673objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2674 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2675 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2676 arabic.h 2677objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2678 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2679 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2680 arabic.h 2681objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2682 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2683 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2684 arabic.h 2685objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h \ 2686 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2687 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2688 globals.h farsi.h arabic.h version.h 2689objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h \ 2690 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2691 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2692 globals.h farsi.h arabic.h 2693objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2694 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2695 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2696 arabic.h 2697objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h \ 2698 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h structs.h \ 2699 regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h \ 2700 proto.h globals.h farsi.h arabic.h ../pixmaps/stock_icons.h 2701objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 2702 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2703 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2704 globals.h farsi.h arabic.h gui_gtk_f.h 2705objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 2706 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2707 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2708 globals.h farsi.h arabic.h ../pixmaps/alert.xpm ../pixmaps/error.xpm \ 2709 ../pixmaps/generic.xpm ../pixmaps/info.xpm ../pixmaps/quest.xpm 2710objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 2711 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2712 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2713 globals.h farsi.h arabic.h gui_at_sb.h 2714objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 2715 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2716 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2717 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 2718 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 2719objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h \ 2720 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2721 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2722 globals.h farsi.h arabic.h ../runtime/vim32x32.xpm \ 2723 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm ../pixmaps/tb_new.xpm \ 2724 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 2725 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 2726 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2727 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2728 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2729 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2730 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2731 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2732 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2733 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2734 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2735 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2736 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2737 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2738 ../pixmaps/tb_minwidth.xpm 2739objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 2740 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2741 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2742 globals.h farsi.h arabic.h gui_at_sb.h 2743objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 2744 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2745 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2746 globals.h farsi.h arabic.h gui_at_sb.h 2747objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2748 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2749 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2750 arabic.h 2751objects/gui_kde.o: gui_kde.cc gui_kde_widget.h kvim_iface.h vim.h \ 2752 auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \ 2753 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \ 2754 globals.h farsi.h 2755objects/gui_kde_widget.o: gui_kde_widget.cc gui_kde_widget.h kvim_iface.h \ 2756 vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \ 2757 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \ 2758 globals.h farsi.h proto/../../pixmaps/alert.xpm proto/../../pixmaps/error.xpm \ 2759 proto/../../pixmaps/generic.xpm proto/../../pixmaps/info.xpm \ 2760 proto/../../pixmaps/quest.xpm 2761objects/gui_kde_x11.o: gui_kde_x11.cc gui_kde_widget.h kvim_iface.h vim.h \ 2762 auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \ 2763 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \ 2764 globals.h farsi.h version.h ../runtime/vim32x32.xpm 2765objects/gui_kde_widget_moc.o: gui_kde_widget_moc.cc gui_kde_widget.h \ 2766 kvim_iface.h vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2767 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h option.h \ 2768 ex_cmds.h proto.h globals.h 2769objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 2770 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2771 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2772 globals.h farsi.h arabic.h 2773objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 2774 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2775 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2776 globals.h farsi.h arabic.h 2777objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 2778 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2779 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2780 globals.h farsi.h arabic.h 2781objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 2782 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2783 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2784 globals.h farsi.h arabic.h 2785objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 2786 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2787 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2788 globals.h farsi.h arabic.h 2789objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h \ 2790 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2791 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2792 globals.h farsi.h arabic.h 2793objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h \ 2794 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2795 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2796 globals.h farsi.h arabic.h version.h 2797objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 2798 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2799 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2800 globals.h farsi.h arabic.h os_unixx.h 2801objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 2802 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2803 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2804 globals.h farsi.h arabic.h 2805objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 2806 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h structs.h \ 2807 regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h \ 2808 proto.h globals.h farsi.h arabic.h version.h workshop.h 2809objects/wsdebug.o: wsdebug.c 2810objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 2811 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2812 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2813 globals.h farsi.h arabic.h integration.h 2814objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 2815 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2816 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2817 globals.h farsi.h arabic.h version.h 2818
