1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installpack only installs the packages 134# make installtutorbin only installs the Vim tutor program 135# make installtutor only installs the Vim tutor files 136# make installspell only installs the spell files 137# make installtools only installs xxd 138# If you install Vim, not to install for real but to prepare a package 139# or RPM, set DESTDIR to the root of the tree. 140# 141# 6. Use Vim until a new version comes out. {{{1 142# 143# 7. "make uninstall_runtime" {{{1 144# Will remove the runtime files for the current version. This is safe 145# to use while another version is being used, only version-specific 146# files will be deleted. 147# To remove the runtime files of another version: 148# make uninstall_runtime VIMRTDIR=/vim54 149# If you want to delete all installed files, use: 150# make uninstall 151# Note that this will delete files that have the same name for any 152# version, thus you might need to do a "make install" soon after this. 153# Be careful not to remove a version of Vim that is still being used! 154# To find out which files and directories will be deleted, use: 155# make -n uninstall 156# }}} 157# 158### This Makefile has been successfully tested on many systems. {{{ 159### Only the ones that require special options are mentioned here. 160### Check the (*) column for remarks, listed below. 161### Later code changes may cause small problems, otherwise Vim is supposed to 162### compile and run without problems. 163 164#system: configurations: version (*) tested by: 165#------------- ------------------------ ------- - ---------- 166#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 167#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 168#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 169#AIX 4.2.1 cc 5.2k (C) Will Fiveash 170#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 171#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 172#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 173#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 174#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 175#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 176#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 177#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 178#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 179#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 180#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 181#Irix 6.4 cc ? 5.0m (S) Rick Sayre 182#Irix 6.5 cc ? 6.0 (S) David Harrison 183#Irix 64 bit 4.5 (K) Jon Wright 184#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 185#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 186#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 188#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 189#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 190#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 191#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 192#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 193#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 194#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 195#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 197#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 198#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 199#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 200#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 201#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 202#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 203#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 204#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 205#Solaris with -lthread 5.5 (W) K. Nagano 206#Solaris gcc (b) Riccardo 207#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 208#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 209#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 210#Tandem/NSK (c) Matthew Woehlke 211#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 212#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 213#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 214# }}} 215 216# (*) Remarks: {{{ 217# 218# (1) Uncomment line below for shlicc2 219# (2) HPUX with compile problems or wrong digraphs, uncomment line below 220# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 221# And add "-lXpm" to MOTIF_LIBS2. 222# (4) For cc the optimizer must be disabled (use CFLAGS= after running 223# configure) (symptom: ":set termcap" output looks weird). 224# (5) Compiler may need extra argument, see below. 225# (6) See below for a few lines to uncomment 226# (7) See below for lines which enable the use of clcc 227# (8) Needs some EXTRA_LIBS, search for Unisys below 228# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 229# (A) May need EXTRA_LIBS, see below 230# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 231# (C) Force the use of curses instead of termcap, see below. 232# (D) Uncomment lines below for QNX 233# (E) You might want to use termlib instead of termcap, see below. 234# (F) See below for instructions. 235# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 236# Sun curses library instead. 237# (H) See line for EXTRA_LIBS below. 238# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 239# (J) If you get undefined symbols, see below for a solution. 240# (K) See lines to uncomment below for machines with 64 bit pointers. 241# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 242# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 243# characters instead of one). 244# (N) SCO with decmouse. 245# (O) LynxOS needs EXTRA_LIBS, see below. 246# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 247# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 248# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 249# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 250# (T) See ../doc/os_beos.txt. 251# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 252# detection, since the configure script runs into an error when it 253# detects Python (probably because of the bash shell). 254# (V) See lines to uncomment below. 255# (X) Need to use the .include "auto/config.mk" line below 256# (Y) See line with c89 below 257# (Z) See lines with cc or c89 below 258# (a) See line with EXTRA_LIBS below. 259# (b) When using gcc with the Solaris linker, make sure you don't use GNU 260# strip, otherwise the binary may not run: "Cannot find ELF". 261# (c) Add -lfloss to EXTRA_LIBS, see below. 262# (x) When you get warnings for precompiled header files, run 263# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 264# }}} 265 266 267#DO NOT CHANGE the next line, we need it for configure to find the compiler 268#instead of using the default from the "make" program. 269#Use a line further down to change the value for CC. 270CC= 271 272# Change and use these defines if configure cannot find your Motif stuff. 273# Unfortunately there is no "standard" location for Motif. {{{ 274# These defines can contain a single directory (recommended) or a list of 275# directories (for when you are working with several systems). The LAST 276# directory that exists is used. 277# When changed, run "make reconfig" next! 278#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 279#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 280### Use these two lines for Infomagic Motif (3) 281#GUI_INC_LOC = -I/usr/X11R6/include 282#GUI_LIB_LOC = -L/usr/X11R6/lib 283# }}} 284 285# Defaults used when auto/config.mk does not exist. 286srcdir = . 287VIMNAME = vim 288EXNAME = ex 289VIEWNAME = view 290 291######################## auto/config.mk ######################## {{{1 292# At this position auto/config.mk is included. When starting from the 293# toplevel Makefile it is almost empty. After running auto/configure it 294# contains settings that have been discovered for your system. Settings below 295# this include override settings in auto/config.mk! 296 297# Note: If make fails because auto/config.mk does not exist (it is not 298# included in the repository), do: 299# cp config.mk.dist auto/config.mk 300 301# (X) How to include auto/config.mk depends on the version of "make" you have, 302# if the current choice doesn't work, try the other one. 303 304include auto/config.mk 305#.include "auto/config.mk" 306CClink = $(CC) 307 308#}}} 309 310# Include the configuration choices first, so we can override everything 311# below. As shipped, this file contains a target that causes to run 312# configure. Once configure was run, this file contains a list of 313# make variables with predefined values instead. Thus any second invocation 314# of make, will build Vim. 315 316# CONFIGURE - configure arguments {{{1 317# You can give a lot of options to configure. 318# Change this to your desire and do 'make config' afterwards 319 320# examples you can uncomment: 321#CONF_ARGS1 = --exec-prefix=/usr 322#CONF_ARGS2 = --with-vim-name=vim8 --with-ex-name=ex8 --with-view-name=view8 323#CONF_ARGS3 = --with-global-runtime=/etc/vim,/usr/share/vim 324#CONF_ARGS4 = --with-local-dir=/usr/share 325#CONF_ARGS5 = --without-local-dir 326 327# Use this one if you distribute a modified version of Vim. 328#CONF_ARGS6 = --with-modified-by="John Doe" 329 330# GUI - For creating Vim with GUI (gvim) (B) 331# Uncomment this line when you don't want to get the GUI version, although you 332# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 333# at all. 334#CONF_OPT_GUI = --disable-gui 335 336# Uncomment one of these lines if you have that GUI but don't want to use it. 337# The automatic check will use another one that can be found. 338# Gnome is disabled by default, because it may cause trouble. 339# 340# When both GTK+ 2 and GTK+ 3 are possible then GTK+ 2 will be selected. 341# To use GTK+ 3 instead use --enable-gui=gtk3 (see below). 342#CONF_OPT_GUI = --disable-gtk2-check 343#CONF_OPT_GUI = --enable-gnome-check 344#CONF_OPT_GUI = --disable-gtk3-check 345#CONF_OPT_GUI = --disable-motif-check 346#CONF_OPT_GUI = --disable-athena-check 347#CONF_OPT_GUI = --disable-nextaw-check 348 349# Uncomment one of these lines to select a specific GUI to use. 350# When using "yes" or nothing, configure will use the first one found: GTK+, 351# Motif or Athena. 352# 353# GTK versions that are known not to work 100% are rejected. 354# Use "--disable-gtktest" to accept them anyway. 355# For GTK 1 use Vim 7.2. 356# 357# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 358# is used then GNOME will automatically be used if it is found. If you have 359# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 360# --enable-gui=gtk or leave out --enable-gnome-check. 361# 362# GNOME makes sense only for GTK+ 2. Avoid use of --enable-gnome-check with 363# GTK+ 3 build, as the functionality of GNOME is already incooperated into 364# GTK+ 3. 365# 366# If the selected GUI isn't found, the GUI is disabled automatically 367#CONF_OPT_GUI = --enable-gui=gtk2 368#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 369#CONF_OPT_GUI = --enable-gui=gnome2 370#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 371#CONF_OPT_GUI = --enable-gui=gtk3 372#CONF_OPT_GUI = --enable-gui=gtk3 --disable-gtktest 373#CONF_OPT_GUI = --enable-gui=motif 374#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 375#CONF_OPT_GUI = --enable-gui=athena 376#CONF_OPT_GUI = --enable-gui=nextaw 377 378# Carbon GUI for Mac OS X 379#CONF_OPT_GUI = --enable-gui=carbon 380 381# Uncomment this line to run an individual test with gvim. 382#GUI_TESTARG = GUI_FLAG=-g 383 384# DARWIN - detecting Mac OS X 385# Uncomment this line when you want to compile a Unix version of Vim on 386# Darwin. None of the Mac specific options or files will be used. 387#CONF_OPT_DARWIN = --disable-darwin 388 389# Select the architecture supported. Default is to build for the current 390# platform. Use "both" for a universal binary. That probably doesn't work 391# when including Perl, Python, etc. 392#CONF_OPT_DARWIN = --with-mac-arch=i386 393#CONF_OPT_DARWIN = --with-mac-arch=ppc 394#CONF_OPT_DARWIN = --with-mac-arch=both 395 396# Uncomment the next line to fail if one of the requested language interfaces 397# cannot be configured. Without this Vim will be build anyway, without 398# the failing interfaces. 399#CONF_OPT_FAIL = --enable-fail-if-missing 400 401# LUA 402# Uncomment one of these when you want to include the Lua interface. 403# First one is for static linking, second one for dynamic loading. 404# Use --with-luajit if you want to use LuaJIT instead of Lua. 405# Set PATH environment variable to find lua or luajit executable. 406# This requires at least "normal" features, "tiny" and "small" don't work. 407#CONF_OPT_LUA = --enable-luainterp 408#CONF_OPT_LUA = --enable-luainterp=dynamic 409#CONF_OPT_LUA = --enable-luainterp --with-luajit 410#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit 411# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 412#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 413 414# MZSCHEME 415# Uncomment this when you want to include the MzScheme interface. 416# NOTE: does not work well together with valgrind. 417#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 418# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 419#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 420#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 421#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 422 423# PERL 424# Uncomment one of these when you want to include the Perl interface. 425# First one is for static linking, second one for dynamic loading. 426# The Perl option sometimes causes problems, because it adds extra flags 427# 428# to the command line. If you see strange flags during compilation, check in 429# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 430# the next line. 431# When you get an error for a missing "perl.exp" file, try creating an empty 432# one: "touch perl.exp". 433# This requires at least "normal" features, "tiny" and "small" don't work. 434#CONF_OPT_PERL = --enable-perlinterp 435#CONF_OPT_PERL = --enable-perlinterp=dynamic 436 437# PYTHON 438# Uncomment lines here when you want to include the Python interface. 439# This requires at least "normal" features, "tiny" and "small" don't work. 440# NOTE: This may cause threading to be enabled, which has side effects (such 441# as using different libraries and debugging becomes more difficult). 442# For Python3 support make a symbolic link in /usr/local/bin: 443# ln -s python3 python3.1 444# If both python2.x and python3.x are enabled then the linking will be via 445# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 446# However, this may still cause problems, such as "import termios" failing. 447# Build two separate versions of Vim in that case. 448#CONF_OPT_PYTHON = --enable-pythoninterp 449#CONF_OPT_PYTHON = --enable-pythoninterp --with-python-command=python2.7 450#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 451#CONF_OPT_PYTHON3 = --enable-python3interp 452#CONF_OPT_PYTHON3 = --enable-python3interp --with-python3-command=python3.6 453#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 454 455# RUBY 456# Uncomment this when you want to include the Ruby interface. 457# First one for static linking, second one for loading when used. 458# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 459# This requires at least "normal" features, "tiny" and "small" don't work. 460#CONF_OPT_RUBY = --enable-rubyinterp 461#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 462#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 463 464# TCL 465# Uncomment this when you want to include the Tcl interface. 466# First one is for static linking, second one for dynamic loading. 467#CONF_OPT_TCL = --enable-tclinterp 468#CONF_OPT_TCL = --enable-tclinterp=dynamic 469#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 470 471# CSCOPE 472# Uncomment this when you want to include the Cscope interface. 473#CONF_OPT_CSCOPE = --enable-cscope 474 475# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 476# Motif version must have XPM libraries (see |netbeans-xpm|). 477# Uncomment this when you do not want the netbeans interface. 478#CONF_OPT_NETBEANS = --disable-netbeans 479 480# CHANNEL - inter process communication. Same conditions as NetBeans. 481# Uncomment this when you do not want inter process communication. 482#CONF_OPT_CHANNEL = --disable-channel 483 484# TERMINAL - Terminal emulator support, :terminal command. Requires the 485# channel feature. The default is enable for when using "huge" features. 486# Uncomment the first line when you want terminal emulator support for 487# not-huge builds. Uncomment the second line when you don't want terminal 488# emulator support in the huge build. 489#CONF_OPT_TERMINAL = --enable-terminal 490#CONF_OPT_TERMINAL = --disable-terminal 491 492# MULTIBYTE - To edit multi-byte characters. 493# This is now always enabled. 494 495# When building with at least "big" features, right-left and Arabic 496# features are enabled. Use this to disable them. 497#CONF_OPT_MULTIBYTE = --disable-rightleft --disable-arabic 498 499# NLS - National Language Support 500# Uncomment this when you do not want to support translated messages, even 501# though configure can find support for it. 502#CONF_OPT_NLS = --disable-nls 503 504# XIM - X Input Method. Special character input support for X11 (Chinese, 505# Japanese, special symbols, etc). Also needed for dead-key support. 506# When omitted it's automatically enabled for the X-windows GUI. 507# HANGUL - Input Hangul (Korean) language using internal routines. 508# Uncomment one of these when you want to input a multibyte language. 509#CONF_OPT_INPUT = --enable-xim 510#CONF_OPT_INPUT = --disable-xim 511#CONF_OPT_INPUT = --enable-hangulinput 512 513# FONTSET - X fontset support for output of languages with many characters. 514# Uncomment this when you want to output a multibyte language. 515#CONF_OPT_OUTPUT = --enable-fontset 516 517# ACL - Uncomment this when you do not want to include ACL support, even 518# though your system does support it. E.g., when it's buggy. 519#CONF_OPT_ACL = --disable-acl 520 521# gpm - For mouse support on Linux console via gpm 522# Uncomment this when you do not want to include gpm support, even 523# though you have gpm libraries and includes. 524# For Debian/Ubuntu gpm support requires the libgpm-dev package. 525#CONF_OPT_GPM = --disable-gpm 526 527# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 528# Uncomment this when you do not want do include sysmouse support, even 529# though you have /dev/sysmouse and includes. 530#CONF_OPT_SYSMOUSE = --disable-sysmouse 531 532# libcanberra - For sound support. Default is on for big features. 533# Uncomment one of the two to chose otherwise. 534# CONF_OPT_CANBERRA = --enable-canberra 535# CONF_OPT_CANBERRA = --disable-canberra 536 537# FEATURES - For creating Vim with more or less features 538# Uncomment one of these lines when you want to include few to many features. 539# The default is "huge" for most systems. 540#CONF_OPT_FEAT = --with-features=tiny 541#CONF_OPT_FEAT = --with-features=small 542#CONF_OPT_FEAT = --with-features=normal 543#CONF_OPT_FEAT = --with-features=big 544#CONF_OPT_FEAT = --with-features=huge 545 546# COMPILED BY - For including a specific e-mail address for ":version". 547#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 548 549# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 550# (otherwise Vim configure will try to include xterm titlebar access) 551# Also disable the GUI above, otherwise it will be included anyway. 552# When both GUI and X11 have been disabled this may save about 15% of the 553# code and make Vim startup quicker. 554#CONF_OPT_X = --without-x 555 556# X WINDOWS DIRECTORY - specify X directories 557# If configure can't find you X stuff, or if you have multiple X11 derivatives 558# installed, you may wish to specify which one to use. 559# Select nothing to let configure choose. 560# This here selects openwin (as found on sun). 561#XROOT = /usr/openwin 562#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 563 564# X11 Session Management Protocol support 565# Vim will try to use XSMP to catch the user logging out if there are unsaved 566# files. Uncomment this line to disable that (it prevents vim trying to open 567# communications with the session manager). 568#CONF_OPT_XSMP = --disable-xsmp 569 570# You may wish to include xsmp but use exclude xsmp-interact if the logout 571# XSMP functionality does not work well with your session-manager (at time of 572# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 573# applications after Vim has cancelled a logout (until Vim quits). This 574# *might* be the Vim code, but is more likely a bug in early GNOME-1. 575# This disables the dialog that asks you if you want to save files or not. 576#CONF_OPT_XSMP = --disable-xsmp-interact 577 578# If you want to always automatically add a servername, also in the terminal. 579#CONF_OPT_AUTOSERVE = --enable-autoservername 580 581# COMPILER - Name of the compiler {{{1 582# The default from configure will mostly be fine, no need to change this, just 583# an example. If a compiler is defined here, configure will use it rather than 584# probing for one. It is dangerous to change this after configure was run. 585# Make will use your choice then -- but beware: Many things may change with 586# another compiler. It is wise to run 'make reconfig' to start all over 587# again. 588#CC = cc 589#CC = gcc 590#CC = clang 591 592# COMPILER FLAGS - change as you please. Either before running {{{1 593# configure or afterwards. For examples see below. 594# When using -g with some older versions of Linux you might get a 595# statically linked executable. 596# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 597#CFLAGS = -g 598#CFLAGS = -O 599 600# Optimization limits - depends on the compiler. Automatic check in configure 601# doesn't work very well, because many compilers only give a warning for 602# unrecognized arguments. 603#CFLAGS = -O -OPT:Olimit=2600 604#CFLAGS = -O -Olimit 2000 605#CFLAGS = -O -FOlimit,2000 606 607# Often used for GCC: mixed optimizing, lot of optimizing, debugging 608#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 609#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 610#CFLAGS = -g -Wall -Wmissing-prototypes 611#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 612#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 613#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 614 615# Use this with GCC to check for mistakes, unused arguments, etc. 616# Note: If you use -Wextra and get warnings in GTK code about function 617# parameters, you can add -Wno-cast-function-type 618#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -Wno-cast-function-type -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 619# Add -Wpedantic to find // comments and other C99 constructs. 620# Better disable Perl and Python to avoid a lot of warnings. 621#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 622#CFLAGS = -g -O2 -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 623#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 624#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 625 626# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 627# allocated memory (and makes every malloc()/free() very slow). 628# Electric Fence is free (search ftp sites). 629# You may want to set the EF_PROTECT_BELOW environment variable to check the 630# other side of allocated memory. 631# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 632# as root: sysctl -w vm.max_proc_mmap=30000 633#EXTRA_LIBS = /usr/local/lib/libefence.a 634 635# Autoconf binary. 636AUTOCONF = autoconf 637 638# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 639#PURIFY = purify 640 641# VALGRIND - remove the # to use valgrind for memory leaks and access errors. 642# Used for the unittest targets. 643# VALGRIND = valgrind --tool=memcheck --leak-check=yes --num-callers=25 --log-file=valgrind.$@ 644 645# NBDEBUG - debugging the netbeans interface. 646#EXTRA_DEFS = -DNBDEBUG 647 648# }}} 649 650# LINT - for running lint 651# For standard Unix lint 652LINT = lint 653LINT_OPTIONS = -beprxzF 654# For splint 655# It doesn't work well, crashes on include files and non-ascii characters. 656#LINT = splint 657#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 658 659# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 660# Might not work with GUI or Perl. 661# After running Vim see the profile result with: gprof vim gmon.out | vim - 662# Need to recompile everything after changing this: "make clean" "make". 663#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 664#PROFILE_LIBS = -pg 665 666# GCC 5 and later need the -no-pie argument. 667#PROFILE_LIBS = -pg -no-pie 668 669# For unknown reasons adding "-lc" fixes a linking problem with some versions 670# of GCC. That's probably a bug in the "-pg" implementation. 671#PROFILE_LIBS = -pg -lc 672 673 674# TEST COVERAGE - Uncomment the two lines below the explanation to get code 675# coverage information. (provided by Yegappan Lakshmanan) 676# 1. make clean, run configure and build Vim as usual. 677# 2. Generate the baseline code coverage information: 678# $ lcov -c -i -b . -d objects -o objects/coverage_base.info 679# 3. Run "make test" to run the unit tests. The code coverage information will 680# be generated in the src/objects directory. 681# 4. Generate the code coverage information from the tests: 682# $ lcov -c -b . -d objects/ -o objects/coverage_test.info 683# 5. Combine the baseline and test code coverage data: 684# $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info 685# 6. Process the test coverage data and generate a report in html: 686# $ genhtml objects/coverage_total.info -o objects 687# 7. Open the objects/index.html file in a web browser to view the coverage 688# information. 689# 690# PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage 691# LDFLAGS=--coverage 692 693 694# Uncomment one of the next two lines to compile Vim with the 695# address sanitizer or with the undefined sanitizer. Works with gcc and 696# clang. May make Vim twice as slow. Errors reported on stderr. 697# More at: https://code.google.com/p/address-sanitizer/ 698#SANITIZER_CFLAGS = -g -O0 -fsanitize=address -fno-omit-frame-pointer 699#SANITIZER_CFLAGS = -g -O0 -fsanitize=undefined -fno-omit-frame-pointer 700SANITIZER_LIBS = $(SANITIZER_CFLAGS) 701 702# MEMORY LEAK DETECTION 703# Requires installing the ccmalloc library. 704# Configuration is in the .ccmalloc or ~/.ccmalloc file. 705# Doesn't work very well, since memory linked to from global variables 706# (in libraries) is also marked as leaked memory. 707#LEAK_CFLAGS = -DEXITFREE 708#LEAK_LIBS = -lccmalloc 709 710# Uncomment this line to have Vim call abort() when an internal error is 711# detected. Useful when using a tool to find errors. 712#ABORT_CFLAGS = -DABORT_ON_INTERNAL_ERROR 713 714##################################################### 715### Specific systems, check if yours is listed! ### {{{ 716##################################################### 717 718### Uncomment things here only if the values chosen by configure are wrong. 719### It's better to adjust configure.ac and "make autoconf", if you can! 720### Then send the required changes to configure.ac to the bugs list. 721 722### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 723### 724#CC = shlicc2 725#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 726 727### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 728### The first probably works on all systems 729### The second should work a bit better on newer systems 730### The third should work a bit better on HPUX 11.11 731### Information provided by: Richard Allen <[email protected]> 732#CC = c89 -D_HPUX_SOURCE 733#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 734#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 735 736### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 737### when the default (ISO) digraphs look completely wrong. 738### After changing this do "touch digraph.c; make". 739#EXTRA_DEFS = -DHPUX_DIGRAPHS 740 741### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 742### is too small to compile many routines. It produces too much defining 743### and no space errors. 744### Uncomment the following to specify a larger macro definition table. 745#CFLAGS = -Wp,-H256000 746 747### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 748### libraries in /usr/lib instead of /lib (avoiding transition links). 749### Information provided by: David Green 750#XROOT = /usr 751#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 752#GUI_INC_LOC = -I/usr/include/Motif1.2 753#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 754 755### (5) AIX 4.1.4 with cc 756#CFLAGS = -O -qmaxmem=8192 757 758### AIX with c89 (Walter Briscoe) 759#CC = c89 760#CPPFLAGS = -D_ALL_SOURCE 761 762### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 763# needed to avoid a problem where strings.h gets included 764#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 765 766### (W) Solaris with multi-threaded libraries (-lthread): 767### If suspending doesn't work properly, try using this line: 768#EXTRA_DEFS = -D_REENTRANT 769 770### (7) Solaris 2.4/2.5 with Centerline compiler 771#CC = clcc 772#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 773#CFLAGS = -O 774 775### (9) Solaris 2.x with cc (SunPro), using Athena. 776### Only required for compiling gui_at_sb.c. 777### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 778### Use one of the lines (either Full ANSI or no ANSI at all) 779#CFLAGS = $(CFLAGS) -Xc 780#CFLAGS = $(CFLAGS) -Xs 781 782### Solaris 2.3 with X11 and specific cc 783#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 784 785### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 786#CC = /usr/ucb/cc 787#EXTRA_LIBS = -R/usr/ucblib 788 789### Solaris with Forte Developer and NetBeans. 790# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 791#CC = cc 792#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 793#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 794#XPM_IPATH = -I$(XPM_DIR)/include 795#EXTRA_LIBS = $(XPM_LIB) 796#EXTRA_IPATHS = $(XPM_IPATH) 797#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 798 799### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 800#LDFLAGS = -lw -ldl -lXmu 801#GUI_LIB_LOC = -L/usr/local/lib 802 803### (8) Unisys 6035 (Glauber Ribeiro) 804#EXTRA_LIBS = -lnsl -lsocket -lgen 805 806### When builtin functions cause problems with gcc (for Sun 4.1.x) 807#CFLAGS = -O2 -Wall -traditional -Wno-implicit 808 809### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 810#EXTRA_DEFS = -DDOMAIN 811#CFLAGS= -O -A systype,bsd4.3 812 813### Coherent 4.2.10 on Intel 386 platform 814#EXTRA_DEFS = -Dvoid=int 815#EXTRA_LIBS = -lterm -lsocket 816 817### SCO 3.2, with different library name for terminfo 818#EXTRA_LIBS = -ltinfo 819 820### UTS2 for Amdahl UTS 2.1.x 821#EXTRA_DEFS = -DUTS2 822#EXTRA_LIBS = -lsocket 823 824### UTS4 for Amdahl UTS 4.x 825#EXTRA_DEFS = -DUTS4 -Xa 826 827### USL for Unix Systems Laboratories (SYSV 4.2) 828#EXTRA_DEFS = -DUSL 829 830### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 831#CC= gcc -D_POSIX_SOURCE 832#CFLAGS= -O2 833#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 834 835### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 836### Also use the CONF_TERM_LIB below! 837#EXTRA_LIBS = -lgen 838 839### (D) QNX (by G.F. Desrochers) 840#CFLAGS = -g -O -mf -4 841 842### (F) QNX (by John Oleynick) 843# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 844# CONF_OPT_X = --without-x. 845# 2. make config 846# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 847# have -ldir (does config find it somewhere?) and -ltermcap has at 848# least one problem so I use termlib.o instead. The problem with 849# termcap is that it segfaults if you call it with the name of 850# a non-existent terminal type. 851# 4. edit auto/config.h and add #define USE_TMPNAM 852# 5. add termlib.o to OBJ 853# 6. make 854 855### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 856#EXTRA_LIBS = -lgen 857 858### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 859#EXTRA_LIBS = -lgen -lnsl 860### For SINIX-Y this is needed for the right prototype of gettimeofday() 861#EXTRA_DEFS = -D_XPG_IV 862 863### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 864# Use both "-F O3" lines for optimization or the "-g" line for debugging 865#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 866#CFLAGS = -F O3 -DSINIXN 867#LDFLAGS = -F O3 868#CFLAGS = -g -DSINIXN 869 870### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 871#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 872#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 873 874### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 875#GUI_INC_LOC = -I/usr/include 876#GUI_LIB_LOC = -L/usr/lib 877#EXTRA_LIBS = -lgen 878 879### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 880#GUI_INC_LOC = -I/usr/necccs/include 881#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 882#XROOT = /usr/necccs 883#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 884#EXTRA_LIBS = -lsocket -lgen 885 886### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 887# Not needed for Irix 5.3, Ives Aerts reported 888#EXTRA_LIBS = -lmalloc -lc_s 889# Irix 4.0, when regexp and regcmp cannot be found when linking: 890#EXTRA_LIBS = -lmalloc -lc_s -lPW 891 892### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 893# Note: This newer option style is used with the MipsPro compilers ONLY if 894# you are compiling an "n32" or "64" ABI binary (use either a -n32 895# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 896# then the CFLAGS option format will be the typical style (i.e. 897# -Olimit 3000). 898#CFLAGS = -OPT:Olimit=3000 -O 899 900### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 901# compiler features! Beware, the optimization is EXTREMELY thorough 902# and takes quite a long time. 903# Note: See the note above. Here, the -mips3 option automatically 904# enables either the "n32" or "64" ABI, depending on what machine you 905# are compiling on (n32 is explicitly enabled here, just to make sure). 906#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 907#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 908 909### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 910### Suggested by Jon Wright <[email protected]>. 911### Tested on R8000 IRIX6.1 Power Indigo2. 912### Check /etc/compiler.defaults for your compiler settings. 913# either (for 64 bit pointers) uncomment the following line 914#GUI_LIB_LOC = -L/usr/lib64 915# then 916# 1) make config 917# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 918# 3) make 919# 920# or (for 32bit pointers) uncomment the following line 921#EXTRA_DEFS = -n32 922#GUI_LIB_LOC = -L/usr/lib32 923# then 924# 1) make config 925# 2) edit auto/config.mk, add -n32 to LDFLAGS 926# 3) make 927# 928#Alternatively: use -o32 instead of -n32. 929### 930 931### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 932### which is found by configure, doesn't work correctly. Symptom is the 933### error message "Termcap entry too long". Uncomment the next line. 934### On AIX 4.2.1 (and other versions probably), libtermcap is reported 935### not to display properly. 936### after changing this, you need to do "make reconfig". 937#CONF_TERM_LIB = --with-tlib=curses 938 939### (E) If you want to use termlib library instead of the automatically found 940### one. After changing this, you need to do "make reconfig". 941#CONF_TERM_LIB = --with-tlib=termlib 942 943### (a) ESIX V4.2 (Reinhard Wobst) 944#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 945 946### (c) Tandem/NSK (Matthew Woehlke) 947#EXTRA_LIBS = -lfloss 948 949### If you want to use ncurses library instead of the automatically found one 950### after changing this, you need to do "make reconfig". 951#CONF_TERM_LIB = --with-tlib=ncurses 952 953### For GCC on MS-Windows, the ".exe" suffix will be added. 954#EXEEXT = .exe 955#LNKEXT = .exe 956 957### (O) For LynxOS 2.5.0, tested on PC. 958#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 959### For LynxOS 3.0.1, tested on PPC 960#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 961### For LynxOS 3.1.0, tested on PC 962#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 963 964 965### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 966### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 967#CFLAGS = -O -Qtarget=m88110compat 968#EXTRA_LIBS = -lgen 969 970# The value of QUOTESED comes from auto/config.mk. 971# Uncomment the next line to use the default value. 972# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 973 974##################### end of system specific lines ################### }}} 975 976### Names of the programs and targets {{{1 977VIMTARGET = $(VIMNAME)$(EXEEXT) 978EXTARGET = $(EXNAME)$(LNKEXT) 979VIEWTARGET = $(VIEWNAME)$(LNKEXT) 980GVIMNAME = g$(VIMNAME) 981GVIMTARGET = $(GVIMNAME)$(LNKEXT) 982GVIEWNAME = g$(VIEWNAME) 983GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 984RVIMNAME = r$(VIMNAME) 985RVIMTARGET = $(RVIMNAME)$(LNKEXT) 986RVIEWNAME = r$(VIEWNAME) 987RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 988RGVIMNAME = r$(GVIMNAME) 989RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 990RGVIEWNAME = r$(GVIEWNAME) 991RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 992VIMDIFFNAME = $(VIMNAME)diff 993GVIMDIFFNAME = g$(VIMDIFFNAME) 994VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 995GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 996EVIMNAME = e$(VIMNAME) 997EVIMTARGET = $(EVIMNAME)$(LNKEXT) 998EVIEWNAME = e$(VIEWNAME) 999EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 1000 1001### Names of the tools that are also made {{{1 1002TOOLS = xxd/xxd$(EXEEXT) 1003 1004### Installation directories. The defaults come from configure. {{{1 1005# 1006### prefix the top directory for the data (default "/usr/local") 1007# 1008# Uncomment the next line to install Vim in your home directory. 1009#prefix = $(HOME) 1010 1011### exec_prefix is the top directory for the executable (default $(prefix)) 1012# 1013# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 1014#exec_prefix = /usr/machine 1015 1016### BINDIR dir for the executable (default "$(exec_prefix)/bin") 1017### MANDIR dir for the manual pages (default "$(prefix)/man") 1018### DATADIR dir for the other files (default "$(prefix)/lib" or 1019# "$(prefix)/share") 1020# They may be different when using different architectures for the 1021# executable and a common directory for the other files. 1022# 1023# Uncomment the next line to install Vim in "/usr/bin" 1024#BINDIR = /usr/bin 1025# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 1026#MANDIR = /usr/share/man 1027# Uncomment the next line to install Vim help files in "/usr/share/vim" 1028#DATADIR = /usr/share 1029 1030### DESTDIR root of the installation tree. This is prepended to the other 1031# directories. This directory must exist. 1032#DESTDIR = ~/pkg/vim 1033 1034### Directory of the man pages 1035MAN1DIR = /man1 1036 1037### Vim version (adjusted by a script) 1038VIMMAJOR = 8 1039VIMMINOR = 1 1040 1041### Location of Vim files (should not need to be changed, and {{{1 1042### some things might not work when they are changed!) 1043VIMDIR = /vim 1044VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 1045HELPSUBDIR = /doc 1046COLSUBDIR = /colors 1047SYNSUBDIR = /syntax 1048INDSUBDIR = /indent 1049AUTOSUBDIR = /autoload 1050PLUGSUBDIR = /plugin 1051FTPLUGSUBDIR = /ftplugin 1052LANGSUBDIR = /lang 1053COMPSUBDIR = /compiler 1054KMAPSUBDIR = /keymap 1055MACROSUBDIR = /macros 1056PACKSUBDIR = /pack 1057TOOLSSUBDIR = /tools 1058TUTORSUBDIR = /tutor 1059SPELLSUBDIR = /spell 1060PRINTSUBDIR = /print 1061PODIR = po 1062 1063### VIMLOC common root of the Vim files (all versions) 1064### VIMRTLOC common root of the runtime Vim files (this version) 1065### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 1066### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 1067### HELPSUBLOC location for help files 1068### COLSUBLOC location for colorscheme files 1069### SYNSUBLOC location for syntax files 1070### INDSUBLOC location for indent files 1071### AUTOSUBLOC location for standard autoload files 1072### PLUGSUBLOC location for standard plugin files 1073### FTPLUGSUBLOC location for ftplugin files 1074### LANGSUBLOC location for language files 1075### COMPSUBLOC location for compiler files 1076### KMAPSUBLOC location for keymap files 1077### MACROSUBLOC location for macro files 1078### PACKSUBLOC location for packages 1079### TOOLSSUBLOC location for tools files 1080### TUTORSUBLOC location for tutor files 1081### SPELLSUBLOC location for spell files 1082### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 1083### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 1084### You can override these if you want to install them somewhere else. 1085### Edit feature.h for compile-time settings. 1086VIMLOC = $(DATADIR)$(VIMDIR) 1087VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 1088VIMRCLOC = $(VIMLOC) 1089HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 1090COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 1091SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 1092INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1093AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1094PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1095FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1096LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1097COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1098KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1099MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1100PACKSUBLOC = $(VIMRTLOC)$(PACKSUBDIR) 1101TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1102TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1103SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1104PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1105SCRIPTLOC = $(VIMRTLOC) 1106 1107### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1108### the runtime directory is not below it. 1109#VIMRUNTIMEDIR = $(VIMRTLOC) 1110 1111### Name of the defaults/evim/mswin file target. 1112VIM_DEFAULTS_FILE = $(DESTDIR)$(SCRIPTLOC)/defaults.vim 1113EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1114MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1115 1116### Name of the menu file target. 1117SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1118SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1119SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1120 1121### Name of the bugreport file target. 1122SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1123 1124### Name of the rgb.txt file target. 1125SYS_RGB_FILE = $(DESTDIR)$(SCRIPTLOC)/rgb.txt 1126 1127### Name of the file type detection file target. 1128SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1129 1130### Name of the file type detection file target. 1131SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1132 1133### Name of the file type detection script file target. 1134SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1135 1136### Name of the ftplugin-on file target. 1137SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1138 1139### Name of the ftplugin-off file target. 1140SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1141 1142### Name of the indent-on file target. 1143SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1144 1145### Name of the indent-off file target. 1146SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1147 1148### Name of the option window script file target. 1149SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1150 1151# Program to install the program in the target directory. Could also be "mv". 1152INSTALL_PROG = cp 1153 1154# Program to install the data in the target directory. Cannot be "mv"! 1155INSTALL_DATA = cp 1156INSTALL_DATA_R = cp -r 1157 1158### Program to run on installed binary. Use the second one to disable strip. 1159#STRIP = strip 1160#STRIP = /bin/true 1161 1162### Permissions for binaries {{{1 1163BINMOD = 755 1164 1165### Permissions for man page 1166MANMOD = 644 1167 1168### Permissions for help files 1169HELPMOD = 644 1170 1171### Permissions for Perl and shell scripts 1172SCRIPTMOD = 755 1173 1174### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1175VIMSCRIPTMOD = 644 1176 1177### Permissions for all directories that are created 1178DIRMOD = 755 1179 1180### Permissions for all other files that are created 1181FILEMOD = 644 1182 1183# Where to copy the man and help files from 1184HELPSOURCE = ../runtime/doc 1185 1186# Where to copy the script files from (menu, bugreport) 1187SCRIPTSOURCE = ../runtime 1188 1189# Where to copy the colorscheme files from 1190COLSOURCE = ../runtime/colors 1191 1192# Where to copy the syntax files from 1193SYNSOURCE = ../runtime/syntax 1194 1195# Where to copy the indent files from 1196INDSOURCE = ../runtime/indent 1197 1198# Where to copy the standard plugin files from 1199AUTOSOURCE = ../runtime/autoload 1200 1201# Where to copy the standard plugin files from 1202PLUGSOURCE = ../runtime/plugin 1203 1204# Where to copy the ftplugin files from 1205FTPLUGSOURCE = ../runtime/ftplugin 1206 1207# Where to copy the macro files from 1208MACROSOURCE = ../runtime/macros 1209 1210# Where to copy the package files from 1211PACKSOURCE = ../runtime/pack 1212 1213# Where to copy the tools files from 1214TOOLSSOURCE = ../runtime/tools 1215 1216# Where to copy the tutor files from 1217TUTORSOURCE = ../runtime/tutor 1218 1219# Where to copy the spell files from 1220SPELLSOURCE = ../runtime/spell 1221 1222# Where to look for language specific files 1223LANGSOURCE = ../runtime/lang 1224 1225# Where to look for compiler files 1226COMPSOURCE = ../runtime/compiler 1227 1228# Where to look for keymap files 1229KMAPSOURCE = ../runtime/keymap 1230 1231# Where to look for print resource files 1232PRINTSOURCE = ../runtime/print 1233 1234# If you are using Linux, you might want to use this to make vim the 1235# default vi editor, it will create a link from vi to Vim when doing 1236# "make install". An existing file will be overwritten! 1237# When not using it, some make programs can't handle an undefined $(LINKIT). 1238#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1239LINKIT = @echo >/dev/null 1240 1241### 1242### GRAPHICAL USER INTERFACE (GUI). {{{1 1243### 'configure --enable-gui' can enable one of these for you if you did set 1244### a corresponding CONF_OPT_GUI above and have X11. 1245### Override configures choice by uncommenting all the following lines. 1246### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1247### for enabling the Athena or Motif GUI. 1248#GUI_SRC = $(NONE_SRC) 1249#GUI_OBJ = $(NONE_OBJ) 1250#GUI_DEFS = $(NONE_DEFS) 1251#GUI_IPATH = $(NONE_IPATH) 1252#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1253#GUI_LIBS1 = $(NONE_LIBS1) 1254#GUI_LIBS2 = $(NONE_LIBS2) 1255#GUI_INSTALL = $(NONE_INSTALL) 1256#GUI_TARGETS = $(NONE_TARGETS) 1257#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1258#GUI_TESTTARGET = $(NONE_TESTTARGET) 1259#GUI_BUNDLE = $(NONE_BUNDLE) 1260 1261# Without a GUI install the normal way. 1262NONE_INSTALL = install_normal 1263 1264### GTK GUI 1265GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c gui_gtk_f.c \ 1266 gui_beval.c $(GRESOURCE_SRC) 1267GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1268 objects/gui_gtk_f.o \ 1269 objects/gui_beval.o $(GRESOURCE_OBJ) 1270GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1271GTK_IPATH = $(GUI_INC_LOC) 1272GTK_LIBS_DIR = $(GUI_LIB_LOC) 1273GTK_LIBS1 = 1274GTK_LIBS2 = $(GTK_LIBNAME) 1275GTK_INSTALL = install_normal install_gui_extra 1276GTK_TARGETS = installglinks 1277GTK_MAN_TARGETS = yes 1278GTK_TESTTARGET = gui 1279GTK_BUNDLE = 1280 1281### Motif GUI 1282MOTIF_SRC = gui.c gui_motif.c gui_x11.c gui_beval.c \ 1283 gui_xmdlg.c gui_xmebw.c 1284MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1285 objects/gui_beval.o \ 1286 objects/gui_xmdlg.o objects/gui_xmebw.o 1287MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1288MOTIF_IPATH = $(GUI_INC_LOC) 1289MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1290MOTIF_LIBS1 = 1291MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1292MOTIF_INSTALL = install_normal install_gui_extra 1293MOTIF_TARGETS = installglinks 1294MOTIF_MAN_TARGETS = yes 1295MOTIF_TESTTARGET = gui 1296MOTIF_BUNDLE = 1297 1298### Athena GUI 1299### Use Xaw3d to make the menus look a little bit nicer 1300#XAW_LIB = -lXaw3d 1301XAW_LIB = -lXaw 1302 1303### When using Xaw3d, uncomment/comment the following lines to also get the 1304### scrollbars from Xaw3d. 1305#ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1306#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1307# objects/gui_beval.o objects/gui_at_fs.o 1308#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1309# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1310# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1311ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c \ 1312 gui_at_sb.c gui_at_fs.c 1313ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1314 objects/gui_beval.o \ 1315 objects/gui_at_sb.o objects/gui_at_fs.o 1316ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1317 1318ATHENA_IPATH = $(GUI_INC_LOC) 1319ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1320ATHENA_LIBS1 = $(XAW_LIB) 1321ATHENA_LIBS2 = -lXt 1322ATHENA_INSTALL = install_normal install_gui_extra 1323ATHENA_TARGETS = installglinks 1324ATHENA_MAN_TARGETS = yes 1325ATHENA_TESTTARGET = gui 1326ATHENA_BUNDLE = 1327 1328### neXtaw GUI 1329NEXTAW_LIB = -lneXtaw 1330 1331NEXTAW_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1332NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1333 objects/gui_beval.o objects/gui_at_fs.o 1334NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1335 1336NEXTAW_IPATH = $(GUI_INC_LOC) 1337NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1338NEXTAW_LIBS1 = $(NEXTAW_LIB) 1339NEXTAW_LIBS2 = -lXt 1340NEXTAW_INSTALL = install_normal install_gui_extra 1341NEXTAW_TARGETS = installglinks 1342NEXTAW_MAN_TARGETS = yes 1343NEXTAW_TESTTARGET = gui 1344NEXTAW_BUNDLE = 1345 1346### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1347# errors: ld: Undefined symbol 1348# _get_wmShellWidgetClass 1349# _get_applicationShellWidgetClass 1350# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1351# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1352#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1353# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1354# too: 1355#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1356 1357# PHOTON GUI 1358PHOTONGUI_SRC = gui.c gui_photon.c 1359PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o 1360PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1361PHOTONGUI_IPATH = 1362PHOTONGUI_LIBS_DIR = 1363PHOTONGUI_LIBS1 = -lph -lphexlib 1364PHOTONGUI_LIBS2 = 1365PHOTONGUI_INSTALL = install_normal install_gui_extra 1366PHOTONGUI_TARGETS = installglinks 1367PHOTONGUI_MAN_TARGETS = yes 1368PHOTONGUI_TESTTARGET = gui 1369PHOTONGUI_BUNDLE = 1370 1371# CARBON GUI 1372CARBONGUI_SRC = gui.c gui_mac.c 1373CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o 1374CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1375 -Wall -Wno-unknown-pragmas \ 1376 -mdynamic-no-pic -pipe 1377CARBONGUI_IPATH = -I. -Iproto 1378CARBONGUI_LIBS_DIR = 1379CARBONGUI_LIBS1 = -framework Carbon 1380CARBONGUI_LIBS2 = 1381CARBONGUI_INSTALL = install_macosx 1382CARBONGUI_TARGETS = 1383CARBONGUI_MAN_TARGETS = 1384CARBONGUI_TESTTARGET = gui 1385CARBONGUI_BUNDLE = gui_bundle 1386APPDIR = $(VIMNAME).app 1387CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1388 1389# All GUI files 1390ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c 1391ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w32.pro gui_photon.pro 1392 1393# }}} 1394 1395TERM_DEPS = \ 1396 libvterm/include/vterm.h \ 1397 libvterm/include/vterm_keycodes.h \ 1398 libvterm/src/rect.h \ 1399 libvterm/src/utf8.h \ 1400 libvterm/src/vterm_internal.h 1401 1402TERM_SRC = libvterm/src/*.c 1403 1404XDIFF_SRC = \ 1405 xdiff/xdiffi.c \ 1406 xdiff/xemit.c \ 1407 xdiff/xprepare.c \ 1408 xdiff/xutils.c \ 1409 xdiff/xhistogram.c \ 1410 xdiff/xpatience.c \ 1411 1412XDIFF_OBJS = \ 1413 objects/xdiffi.o \ 1414 objects/xemit.o \ 1415 objects/xprepare.o \ 1416 objects/xutils.o \ 1417 objects/xhistogram.o \ 1418 objects/xpatience.o \ 1419 1420XDIFF_INCL = \ 1421 xdiff/xdiff.h \ 1422 xdiff/xdiffi.h \ 1423 xdiff/xemit.h \ 1424 xdiff/xinclude.h \ 1425 xdiff/xmacros.h \ 1426 xdiff/xprepare.h \ 1427 xdiff/xtypes.h \ 1428 xdiff/xutils.h \ 1429 1430### Command to create dependencies based on #include "..." 1431### prototype headers are ignored due to -DPROTO, system 1432### headers #include <...> are ignored if we use the -MM option, as 1433### e.g. provided by gcc-cpp. 1434### Include FEAT_GUI to get dependency on gui.h 1435### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1436CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1437 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1438 1439# flags for cproto 1440# This is for cproto 3 patchlevel 8 or below 1441# __inline, __attribute__ and __extension__ are not recognized by cproto 1442# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1443#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1444# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1445# -D__extension__= -D__restrict="" \ 1446# -D__gnuc_va_list=char -D__builtin_va_list=char 1447 1448# 1449# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1450# __inline and __attribute__ are now recognized by cproto 1451# -D"foo()=" is not supported by all compilers so do not use it 1452NO_ATTR= 1453# 1454# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1455# PROTO_FLAGS = -f4 -d -E"$(CPP)" $(NO_ATTR) 1456# 1457# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1458PROTO_FLAGS = -d -E"$(CPP)" $(NO_ATTR) 1459 1460 1461################################################ 1462## no changes required below this line ## 1463################################################ 1464 1465SHELL = /bin/sh 1466 1467# We would normally use "mkdir -p" but it doesn't work properly everywhere. 1468# Using AC_PROG_MKDIR_P in configure.ac has a problem with the "auto" 1469# directory. Always use the install-sh script, it's slower but reliable. 1470MKDIR_P = $(SHELL) install-sh -c -d 1471 1472.SUFFIXES: 1473.SUFFIXES: .c .o .pro 1474 1475VTERM_CFLAGS = -Ilibvterm/include 1476 1477PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1478POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS) 1479 1480ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(ABORT_CFLAGS) $(POST_DEFS) 1481 1482# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1483# with "-E". 1484OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1485 1486LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) \ 1487 $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) \ 1488 $(PYTHON3_CFLAGS) $(TCL_CFLAGS) $(VTERM_CFLAGS) \ 1489 -Dinline= -D__extension__= -Dalloca=alloca 1490 1491LINT_EXTRA = -DHANGUL_INPUT -D"__attribute__(x)=" 1492 1493DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1494 1495# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1496# needed by racket. 1497ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1498ALL_LIBS = \ 1499 $(GUI_LIBS1) \ 1500 $(GUI_X_LIBS) \ 1501 $(GUI_LIBS2) \ 1502 $(X_PRE_LIBS) \ 1503 $(X_LIBS) \ 1504 $(X_EXTRA_LIBS) \ 1505 $(MZSCHEME_LIBS) \ 1506 $(LIBS) \ 1507 $(EXTRA_LIBS) \ 1508 $(LUA_LIBS) \ 1509 $(PERL_LIBS) \ 1510 $(PYTHON_LIBS) \ 1511 $(PYTHON3_LIBS) \ 1512 $(TCL_LIBS) \ 1513 $(RUBY_LIBS) \ 1514 $(PROFILE_LIBS) \ 1515 $(SANITIZER_LIBS) \ 1516 $(LEAK_LIBS) 1517 1518# abbreviations 1519DEST_BIN = $(DESTDIR)$(BINDIR) 1520DEST_VIM = $(DESTDIR)$(VIMLOC) 1521DEST_RT = $(DESTDIR)$(VIMRTLOC) 1522DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1523DEST_COL = $(DESTDIR)$(COLSUBLOC) 1524DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1525DEST_IND = $(DESTDIR)$(INDSUBLOC) 1526DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1527DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1528DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1529DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1530DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1531DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1532DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1533DEST_PACK = $(DESTDIR)$(PACKSUBLOC) 1534DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1535DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1536DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1537DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1538DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1539DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1540 1541# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1542# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1543# directory first. 1544# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1545DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1546DEST_MAN_DA = $(DEST_MAN_TOP)/da$(MAN1DIR) 1547DEST_MAN_DA_I = $(DEST_MAN_TOP)/da.ISO8859-1$(MAN1DIR) 1548DEST_MAN_DA_U = $(DEST_MAN_TOP)/da.UTF-8$(MAN1DIR) 1549DEST_MAN_DE = $(DEST_MAN_TOP)/de$(MAN1DIR) 1550DEST_MAN_DE_I = $(DEST_MAN_TOP)/de.ISO8859-1$(MAN1DIR) 1551DEST_MAN_DE_U = $(DEST_MAN_TOP)/de.UTF-8$(MAN1DIR) 1552DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1553DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1554DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1555DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1556DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1557DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1558DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) 1559DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1560DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1561DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1562DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1563DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1564 1565# stuff common to all systems 1566include Make_all.mak 1567 1568# get the list of tests 1569include testdir/Make_all.mak 1570 1571# BASIC_SRC: files that are always used 1572# GUI_SRC: extra GUI files for current configuration 1573# ALL_GUI_SRC: all GUI files for Unix 1574# 1575# SRC: files used for current configuration 1576# ALL_SRC: source files used for make depend and make lint 1577 1578BASIC_SRC = \ 1579 arabic.c \ 1580 arglist.c \ 1581 autocmd.c \ 1582 beval.c \ 1583 blob.c \ 1584 blowfish.c \ 1585 buffer.c \ 1586 change.c \ 1587 charset.c \ 1588 cindent.c \ 1589 cmdexpand.c \ 1590 cmdhist.c \ 1591 crypt.c \ 1592 crypt_zip.c \ 1593 debugger.c \ 1594 dict.c \ 1595 diff.c \ 1596 digraph.c \ 1597 drawline.c \ 1598 drawscreen.c \ 1599 edit.c \ 1600 eval.c \ 1601 evalbuffer.c \ 1602 evalfunc.c \ 1603 evalvars.c \ 1604 evalwindow.c \ 1605 ex_cmds.c \ 1606 ex_cmds2.c \ 1607 ex_docmd.c \ 1608 ex_eval.c \ 1609 ex_getln.c \ 1610 fileio.c \ 1611 filepath.c \ 1612 findfile.c \ 1613 fold.c \ 1614 getchar.c \ 1615 hardcopy.c \ 1616 hashtab.c \ 1617 highlight.c \ 1618 if_cscope.c \ 1619 if_xcmdsrv.c \ 1620 indent.c \ 1621 insexpand.c \ 1622 json.c \ 1623 list.c \ 1624 main.c \ 1625 map.c \ 1626 mark.c \ 1627 memfile.c \ 1628 memline.c \ 1629 menu.c \ 1630 message.c \ 1631 misc1.c \ 1632 misc2.c \ 1633 mouse.c \ 1634 move.c \ 1635 mbyte.c \ 1636 normal.c \ 1637 ops.c \ 1638 option.c \ 1639 optionstr.c \ 1640 os_unix.c \ 1641 auto/pathdef.c \ 1642 popupmenu.c \ 1643 popupwin.c \ 1644 profiler.c \ 1645 pty.c \ 1646 quickfix.c \ 1647 regexp.c \ 1648 register.c \ 1649 scriptfile.c \ 1650 screen.c \ 1651 search.c \ 1652 session.c \ 1653 sha256.c \ 1654 sign.c \ 1655 sound.c \ 1656 spell.c \ 1657 spellfile.c \ 1658 spellsuggest.c \ 1659 syntax.c \ 1660 tag.c \ 1661 term.c \ 1662 terminal.c \ 1663 testing.c \ 1664 textprop.c \ 1665 ui.c \ 1666 undo.c \ 1667 usercmd.c \ 1668 userfunc.c \ 1669 version.c \ 1670 viminfo.c \ 1671 window.c \ 1672 bufwrite.c \ 1673 $(OS_EXTRA_SRC) 1674 1675SRC = $(BASIC_SRC) \ 1676 $(GUI_SRC) \ 1677 $(TERM_SRC) \ 1678 $(XDIFF_SRC) \ 1679 $(HANGULIN_SRC) \ 1680 $(LUA_SRC) \ 1681 $(MZSCHEME_SRC) \ 1682 $(PERL_SRC) \ 1683 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1684 $(TCL_SRC) \ 1685 $(RUBY_SRC) 1686 1687EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1688 if_python.c if_python3.c if_tcl.c if_ruby.c \ 1689 gui_beval.c netbeans.c channel.c \ 1690 $(GRESOURCE_SRC) 1691 1692# Unittest files 1693JSON_TEST_SRC = json_test.c 1694JSON_TEST_TARGET = json_test$(EXEEXT) 1695KWORD_TEST_SRC = kword_test.c 1696KWORD_TEST_TARGET = kword_test$(EXEEXT) 1697MEMFILE_TEST_SRC = memfile_test.c 1698MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1699MESSAGE_TEST_SRC = message_test.c 1700MESSAGE_TEST_TARGET = message_test$(EXEEXT) 1701 1702UNITTEST_SRC = $(JSON_TEST_SRC) $(KWORD_TEST_SRC) $(MEMFILE_TEST_SRC) $(MESSAGE_TEST_SRC) 1703UNITTEST_TARGETS = $(JSON_TEST_TARGET) $(KWORD_TEST_TARGET) $(MEMFILE_TEST_TARGET) $(MESSAGE_TEST_TARGET) 1704RUN_UNITTESTS = run_json_test run_kword_test run_memfile_test run_message_test 1705 1706# All sources, also the ones that are not configured 1707ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) \ 1708 $(EXTRA_SRC) $(TERM_SRC) $(XDIFF_SRC) 1709 1710# Which files to check with lint. Select one of these three lines. ALL_SRC 1711# checks more, but may not work well for checking a GUI that wasn't configured. 1712# The perl sources also don't work well with lint. 1713LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) \ 1714 $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1715 $(NETBEANS_SRC) $(CHANNEL_SRC) $(TERM_SRC) 1716#LINT_SRC = $(SRC) 1717#LINT_SRC = $(ALL_SRC) 1718#LINT_SRC = $(BASIC_SRC) 1719 1720OBJ_COMMON = \ 1721 objects/arabic.o \ 1722 objects/arglist.o \ 1723 objects/autocmd.o \ 1724 objects/beval.o \ 1725 objects/buffer.o \ 1726 objects/change.o \ 1727 objects/blob.o \ 1728 objects/blowfish.o \ 1729 objects/cindent.o \ 1730 objects/cmdexpand.o \ 1731 objects/cmdhist.o \ 1732 objects/crypt.o \ 1733 objects/crypt_zip.o \ 1734 objects/debugger.o \ 1735 objects/dict.o \ 1736 objects/diff.o \ 1737 objects/digraph.o \ 1738 objects/drawline.o \ 1739 objects/drawscreen.o \ 1740 objects/edit.o \ 1741 objects/eval.o \ 1742 objects/evalbuffer.o \ 1743 objects/evalfunc.o \ 1744 objects/evalvars.o \ 1745 objects/evalwindow.o \ 1746 objects/ex_cmds.o \ 1747 objects/ex_cmds2.o \ 1748 objects/ex_docmd.o \ 1749 objects/ex_eval.o \ 1750 objects/ex_getln.o \ 1751 objects/fileio.o \ 1752 objects/filepath.o \ 1753 objects/findfile.o \ 1754 objects/fold.o \ 1755 objects/getchar.o \ 1756 objects/hardcopy.o \ 1757 objects/hashtab.o \ 1758 objects/highlight.o \ 1759 $(HANGULIN_OBJ) \ 1760 objects/if_cscope.o \ 1761 objects/if_xcmdsrv.o \ 1762 objects/indent.o \ 1763 objects/insexpand.o \ 1764 objects/list.o \ 1765 objects/map.o \ 1766 objects/mark.o \ 1767 objects/memline.o \ 1768 objects/menu.o \ 1769 objects/misc1.o \ 1770 objects/misc2.o \ 1771 objects/mouse.o \ 1772 objects/move.o \ 1773 objects/mbyte.o \ 1774 objects/normal.o \ 1775 objects/ops.o \ 1776 objects/option.o \ 1777 objects/optionstr.o \ 1778 objects/os_unix.o \ 1779 objects/pathdef.o \ 1780 objects/popupmenu.o \ 1781 objects/popupwin.o \ 1782 objects/profiler.o \ 1783 objects/pty.o \ 1784 objects/quickfix.o \ 1785 objects/regexp.o \ 1786 objects/register.o \ 1787 objects/scriptfile.o \ 1788 objects/screen.o \ 1789 objects/search.o \ 1790 objects/session.o \ 1791 objects/sha256.o \ 1792 objects/sign.o \ 1793 objects/sound.o \ 1794 objects/spell.o \ 1795 objects/spellfile.o \ 1796 objects/spellsuggest.o \ 1797 objects/syntax.o \ 1798 objects/tag.o \ 1799 objects/term.o \ 1800 objects/terminal.o \ 1801 objects/testing.o \ 1802 objects/textprop.o \ 1803 objects/ui.o \ 1804 objects/undo.o \ 1805 objects/usercmd.o \ 1806 objects/userfunc.o \ 1807 objects/version.o \ 1808 objects/viminfo.o \ 1809 objects/window.o \ 1810 objects/bufwrite.o \ 1811 $(GUI_OBJ) \ 1812 $(TERM_OBJ) \ 1813 $(LUA_OBJ) \ 1814 $(MZSCHEME_OBJ) \ 1815 $(PERL_OBJ) \ 1816 $(PYTHON_OBJ) \ 1817 $(PYTHON3_OBJ) \ 1818 $(TCL_OBJ) \ 1819 $(RUBY_OBJ) \ 1820 $(OS_EXTRA_OBJ) \ 1821 $(NETBEANS_OBJ) \ 1822 $(CHANNEL_OBJ) \ 1823 $(XDIFF_OBJS) 1824 1825# The files included by tests are not in OBJ_COMMON. 1826OBJ_MAIN = \ 1827 objects/charset.o \ 1828 objects/json.o \ 1829 objects/main.o \ 1830 objects/memfile.o \ 1831 objects/message.o 1832 1833OBJ = $(OBJ_COMMON) $(OBJ_MAIN) 1834 1835OBJ_JSON_TEST = \ 1836 objects/charset.o \ 1837 objects/memfile.o \ 1838 objects/message.o \ 1839 objects/json_test.o 1840 1841JSON_TEST_OBJ = $(OBJ_COMMON) $(OBJ_JSON_TEST) 1842 1843OBJ_KWORD_TEST = \ 1844 objects/json.o \ 1845 objects/memfile.o \ 1846 objects/message.o \ 1847 objects/kword_test.o 1848 1849KWORD_TEST_OBJ = $(OBJ_COMMON) $(OBJ_KWORD_TEST) 1850 1851OBJ_MEMFILE_TEST = \ 1852 objects/charset.o \ 1853 objects/json.o \ 1854 objects/message.o \ 1855 objects/memfile_test.o 1856 1857MEMFILE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MEMFILE_TEST) 1858 1859OBJ_MESSAGE_TEST = \ 1860 objects/charset.o \ 1861 objects/json.o \ 1862 objects/memfile.o \ 1863 objects/message_test.o 1864 1865MESSAGE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MESSAGE_TEST) 1866 1867ALL_OBJ = $(OBJ_COMMON) \ 1868 $(OBJ_MAIN) \ 1869 $(OBJ_JSON_TEST) \ 1870 $(OBJ_KWORD_TEST) \ 1871 $(OBJ_MEMFILE_TEST) \ 1872 $(OBJ_MESSAGE_TEST) 1873 1874 1875PRO_AUTO = \ 1876 arabic.pro \ 1877 arglist.pro \ 1878 autocmd.pro \ 1879 blowfish.pro \ 1880 buffer.pro \ 1881 change.pro \ 1882 charset.pro \ 1883 cindent.pro \ 1884 cmdexpand.pro \ 1885 cmdhist.pro \ 1886 crypt.pro \ 1887 crypt_zip.pro \ 1888 debugger.pro \ 1889 dict.pro \ 1890 diff.pro \ 1891 digraph.pro \ 1892 drawline.pro \ 1893 drawscreen.pro \ 1894 edit.pro \ 1895 eval.pro \ 1896 evalbuffer.pro \ 1897 evalfunc.pro \ 1898 evalvars.pro \ 1899 evalwindow.pro \ 1900 ex_cmds.pro \ 1901 ex_cmds2.pro \ 1902 ex_docmd.pro \ 1903 ex_eval.pro \ 1904 ex_getln.pro \ 1905 fileio.pro \ 1906 filepath.pro \ 1907 findfile.pro \ 1908 fold.pro \ 1909 getchar.pro \ 1910 hardcopy.pro \ 1911 hashtab.pro \ 1912 hangulin.pro \ 1913 highlight.pro \ 1914 if_cscope.pro \ 1915 if_lua.pro \ 1916 if_mzsch.pro \ 1917 if_python.pro \ 1918 if_python3.pro \ 1919 if_ruby.pro \ 1920 if_xcmdsrv.pro \ 1921 indent.pro \ 1922 insexpand.pro \ 1923 json.pro \ 1924 list.pro \ 1925 main.pro \ 1926 map.pro \ 1927 mark.pro \ 1928 mbyte.pro \ 1929 memfile.pro \ 1930 memline.pro \ 1931 menu.pro \ 1932 message.pro \ 1933 misc1.pro \ 1934 misc2.pro \ 1935 mouse.pro \ 1936 move.pro \ 1937 normal.pro \ 1938 ops.pro \ 1939 option.pro \ 1940 optionstr.pro \ 1941 os_mac_conv.pro \ 1942 os_unix.pro \ 1943 popupmenu.pro \ 1944 popupwin.pro \ 1945 profiler.pro \ 1946 pty.pro \ 1947 quickfix.pro \ 1948 regexp.pro \ 1949 register.pro \ 1950 scriptfile.pro \ 1951 screen.pro \ 1952 search.pro \ 1953 session.pro \ 1954 sha256.pro \ 1955 sign.pro \ 1956 sound.pro \ 1957 spell.pro \ 1958 spellfile.pro \ 1959 spellsuggest.pro \ 1960 syntax.pro \ 1961 tag.pro \ 1962 term.pro \ 1963 terminal.pro \ 1964 termlib.pro \ 1965 testing.pro \ 1966 textprop.pro \ 1967 ui.pro \ 1968 undo.pro \ 1969 usercmd.pro \ 1970 userfunc.pro \ 1971 version.pro \ 1972 viminfo.pro \ 1973 window.pro \ 1974 bufwrite.pro \ 1975 beval.pro \ 1976 gui_beval.pro \ 1977 netbeans.pro \ 1978 channel.pro \ 1979 $(ALL_GUI_PRO) \ 1980 $(TCL_PRO) 1981 1982# Resources used for the Mac are in one directory. 1983RSRC_DIR = os_mac_rsrc 1984 1985PRO_MANUAL = os_amiga.pro os_win32.pro \ 1986 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1987 1988# Default target is making the executable and tools 1989all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1990 1991tools: $(TOOLS) 1992 1993# Run configure with all the setting from above. 1994# 1995# Note: auto/config.h doesn't depend on configure, because running configure 1996# doesn't always update auto/config.h. The timestamp isn't changed if the 1997# file contents didn't change (to avoid recompiling everything). Including a 1998# dependency on auto/config.h would cause running configure each time when 1999# auto/config.h isn't updated. The dependency on auto/config.mk should make 2000# sure configure is run when it's needed. 2001# 2002# Remove the config.cache every time, once in a while it causes problems that 2003# are very hard to figure out. 2004# 2005config auto/config.mk: auto/configure config.mk.in config.h.in 2006 -rm -f auto/config.cache 2007 if test "X$(MAKECMDGOALS)" != "Xclean" \ 2008 -a "X$(MAKECMDGOALS)" != "Xdistclean" \ 2009 -a "X$(MAKECMDGOALS)" != "Xautoconf" \ 2010 -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ 2011 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 2012 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 2013 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 2014 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 2015 $(CONF_OPT_AUTOSERVE) $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 2016 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 2017 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 2018 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 2019 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) \ 2020 $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 2021 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 2022 $(CONF_OPT_CHANNEL) $(CONF_OPT_TERMINAL) \ 2023 $(CONF_ARGS) $(CONF_ARGS1) $(CONF_ARGS2) $(CONF_ARGS3) \ 2024 $(CONF_ARGS4) $(CONF_ARGS5) $(CONF_ARGS6) \ 2025 $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 2026 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 2027 $(CONF_OPT_SYSMOUSE) $(CONF_OPT_CANBERRA); \ 2028 fi 2029 2030# Use "make reconfig" to rerun configure without cached values. 2031# When config.h changes, most things will be recompiled automatically. 2032# Invoke $(MAKE) to run config with the empty auto/config.mk. 2033# Invoke $(MAKE) to build all with the filled auto/config.mk. 2034reconfig: scratch clean 2035 $(MAKE) -f Makefile config 2036 $(MAKE) -f Makefile all 2037 2038# Run autoconf to produce auto/configure. 2039# Note: 2040# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 2041# producing auto/configure. 2042# - autoconf is not run automatically, because a patch usually changes both 2043# configure.ac and auto/configure but can't update the timestamps. People 2044# who do not have (the correct version of) autoconf would run into trouble. 2045# 2046# Two tricks are required to make autoconf put its output in the "auto" dir: 2047# - Temporarily move the ./configure script to ./configure.save. Don't 2048# overwrite it, it's probably the result of an aborted autoconf. 2049# - Use sed to change ./config.log to auto/config.log in the configure script. 2050# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 2051# care of: 2052# - configure.lineno: has the line numbers replaced with $LINENO. That 2053# improves patches a LOT, thus use it instead (until someone says it doesn't 2054# work on some system). 2055# - autom4te.cache directory is created and not cleaned up. Delete it. 2056# - Uses ">config.log" instead of "./config.log". 2057autoconf: 2058 if test ! -f configure.save; then mv configure configure.save; fi 2059 $(AUTOCONF) 2060 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 2061 chmod 755 auto/configure 2062 mv -f configure.save configure 2063 -rm -rf autom4te.cache 2064 -rm -f auto/config.status auto/config.cache 2065 2066# Run vim script to generate the Ex command lookup table. 2067# This only needs to be run when a command name has been added or changed. 2068# If this fails because you don't have Vim yet, first build and install Vim 2069# without changes. 2070cmdidxs: ex_cmds.h 2071 vim --clean -X -u create_cmdidxs.vim 2072 2073 2074# The normal command to compile a .c file to its .o file. 2075# Without or with ALL_CFLAGS. 2076CCC_NF = $(CC) -c -I$(srcdir) 2077CCC = $(CCC_NF) $(ALL_CFLAGS) 2078 2079 2080# Link the target for normal use or debugging. 2081# A shell script is used to try linking without unnecessary libraries. 2082$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 2083 $(CCC) version.c -o objects/version.o 2084 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2085 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 2086 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2087 sh $(srcdir)/link.sh 2088 2089xxd/xxd$(EXEEXT): xxd/xxd.c 2090 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 2091 $(MAKE) -f Makefile 2092 2093# Build the language specific files if they were unpacked. 2094# Generate the converted .mo files separately, it's no problem if this fails. 2095languages: 2096 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2097 cd $(PODIR); \ 2098 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 2099 fi 2100 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2101 cd $(PODIR); \ 2102 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 2103 fi 2104 2105# Update the *.po files for changes in the sources. Only run manually. 2106update-po: 2107 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 2108 2109# Generate function prototypes. This is not needed to compile vim, but if 2110# you want to use it, cproto is out there on the net somewhere -- Webb 2111# 2112# When generating os_amiga.pro and os_win32.pro there will be a 2113# few include files that can not be found, that's OK. 2114 2115proto: $(PRO_AUTO) $(PRO_MANUAL) 2116 2117# Filter out arguments that cproto doesn't support. 2118# Don't pass "-pthread", "-fwrapv" and similar arguments to cproto, it sees 2119# them as a list of individual flags. 2120# The -E"gcc -E" argument must be separate to avoid problems with shell 2121# quoting. 2122# Strip -O2, it may cause cproto to write stderr to the file "2". 2123CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 2124 `echo '$(LINT_CFLAGS)' | sed -e 's/ -[a-z-]\+//g' -e 's/ -O[^ ]\+//g'` 2125 2126### Would be nice if this would work for "normal" make. 2127### Currently it only works for (Free)BSD make. 2128#$(PRO_AUTO): $$(*F).c 2129# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 2130 2131# Always define FEAT_GUI. This may generate a few warnings if it's also 2132# defined in auto/config.h, you can ignore that. 2133.c.pro: 2134 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2135 echo "/* vim: set ft=c : */" >> proto/$@ 2136 2137os_amiga.pro: os_amiga.c 2138 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 2139 echo "/* vim: set ft=c : */" >> proto/$@ 2140 2141os_win32.pro: os_win32.c 2142 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2143 echo "/* vim: set ft=c : */" >> proto/$@ 2144 2145os_mswin.pro: os_mswin.c 2146 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2147 echo "/* vim: set ft=c : */" >> proto/$@ 2148 2149winclip.pro: winclip.c 2150 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2151 echo "/* vim: set ft=c : */" >> proto/$@ 2152 2153os_beos.pro: os_beos.c 2154 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 2155 echo "/* vim: set ft=c : */" >> proto/$@ 2156 2157os_vms.pro: os_vms.c 2158# must use os_vms_conf.h for auto/config.h 2159 mv auto/config.h auto/config.h.save 2160 cp os_vms_conf.h auto/config.h 2161 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 2162 echo "/* vim: set ft=c : */" >> proto/$@ 2163 rm auto/config.h 2164 mv auto/config.h.save auto/config.h 2165 2166# if_perl.pro is special: Use the generated if_perl.c for input and remove 2167# prototypes for local functions. 2168if_perl.pro: auto/if_perl.c 2169 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 2170 2171gui_gtk_gresources.pro: auto/gui_gtk_gresources.c 2172 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2173 echo "/* vim: set ft=c : */" >> proto/$@ 2174 2175notags: 2176 -rm -f tags 2177 2178# Note: tags is made for the currently configured version, can't include both 2179# Motif and Athena GUI 2180# You can ignore error messages for missing files. 2181tags TAGS: notags 2182 $(TAGPRG) $(TAGS_FILES) 2183 2184# Make a highlight file for types. Requires Exuberant ctags and awk 2185types: types.vim 2186types.vim: $(TAGS_FILES) 2187 ctags --c-kinds=gstu -o- $(TAGS_FILES) |\ 2188 awk 'BEGIN{printf("syntax keyword Type\t")}\ 2189 {printf("%s ", $$1)}END{print ""}' > $@ 2190 echo "syn keyword Constant OK FAIL TRUE FALSE MAYBE" >> $@ 2191 2192# TESTING 2193# 2194# Execute the test scripts and the unittests. 2195# Do the scripttests first, so that the summary shows last. 2196test check: unittests test_libvterm scripttests 2197 2198# Execute the test scripts. Run these after compiling Vim, before installing. 2199# This doesn't depend on $(VIMTARGET), because that won't work when configure 2200# wasn't run yet. Restart make to build it instead. 2201# 2202# This will produce a lot of garbage on your screen, including a few error 2203# messages. Don't worry about that. 2204# If there is a real error, there will be a difference between "testXX.out" and 2205# a "testXX.ok" file. 2206# If everything is alright, the final message will be "ALL DONE". If not you 2207# get "TEST FAILURE". 2208# 2209scripttests: 2210 $(MAKE) -f Makefile $(VIMTARGET) 2211 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2212 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 2213 fi 2214 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 2215 ln -s $(VIMTARGET) vim; \ 2216 fi 2217 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2218 2219# Run the tests with the GUI. Assumes vim/gvim was already built 2220testgui: 2221 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) GUI_FLAG=-g $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2222 2223benchmark: 2224 cd testdir; $(MAKE) -f Makefile benchmark VIMPROG=../$(VIMTARGET) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2225 2226unittesttargets: 2227 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 2228 2229# Swap these lines to run individual tests with gvim instead of vim. 2230VIMTESTTARGET = $(VIMTARGET) 2231# VIMTESTTARGET = $(GVIMTARGET) 2232 2233# Execute the unittests one by one. 2234unittest unittests: $(RUN_UNITTESTS) 2235 2236run_json_test: $(JSON_TEST_TARGET) 2237 $(VALGRIND) ./$(JSON_TEST_TARGET) || exit 1; echo $* passed; 2238 2239run_kword_test: $(KWORD_TEST_TARGET) 2240 $(VALGRIND) ./$(KWORD_TEST_TARGET) || exit 1; echo $* passed; 2241 2242run_memfile_test: $(MEMFILE_TEST_TARGET) 2243 $(VALGRIND) ./$(MEMFILE_TEST_TARGET) || exit 1; echo $* passed; 2244 2245run_message_test: $(MESSAGE_TEST_TARGET) 2246 $(VALGRIND) ./$(MESSAGE_TEST_TARGET) || exit 1; echo $* passed; 2247 2248# Run the libvterm tests. 2249# This currently doesn't work on Mac, only run on Linux for now. 2250test_libvterm: 2251 @if test `uname` = "Linux"; then \ 2252 cd libvterm; $(MAKE) -f Makefile test \ 2253 CC="$(CC)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"; \ 2254 fi 2255 2256# Run individual OLD style test. 2257# These do not depend on the executable, compile it when needed. 2258test1 \ 2259 test_eval \ 2260 test39 \ 2261 test42 test44 test48 test49 \ 2262 test52 test59 \ 2263 test64 test69 \ 2264 test70 test72 \ 2265 test86 test87 test88 \ 2266 test94 test95 test99: 2267 cd testdir; rm -f $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2268 2269# Run individual NEW style test. 2270# These do not depend on the executable, compile it when needed. 2271# Set $TEST_FILTER to select what test function to invoke, e.g.: 2272# export TEST_FILTER=Test_terminal_wipe_buffer 2273# A partial match also works: 2274# export TEST_FILTER=wipe_buffer 2275$(NEW_TESTS): 2276 cd testdir; $(MAKE) $@ VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2277 2278newtests: 2279 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile newtestssilent VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2280 @if test -f testdir/test.log; then \ 2281 cat testdir/test.log; \ 2282 fi 2283 cat testdir/messages 2284 2285testclean: 2286 cd testdir; $(MAKE) -f Makefile clean 2287 if test -d $(PODIR); then \ 2288 cd $(PODIR); $(MAKE) checkclean; \ 2289 fi 2290 2291# Unittests 2292# It's build just like Vim to satisfy all dependencies. 2293$(JSON_TEST_TARGET): auto/config.mk objects $(JSON_TEST_OBJ) 2294 $(CCC) version.c -o objects/version.o 2295 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2296 -o $(JSON_TEST_TARGET) $(JSON_TEST_OBJ) $(ALL_LIBS)" \ 2297 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2298 sh $(srcdir)/link.sh 2299 2300$(KWORD_TEST_TARGET): auto/config.mk objects $(KWORD_TEST_OBJ) 2301 $(CCC) version.c -o objects/version.o 2302 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2303 -o $(KWORD_TEST_TARGET) $(KWORD_TEST_OBJ) $(ALL_LIBS)" \ 2304 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2305 sh $(srcdir)/link.sh 2306 2307$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 2308 $(CCC) version.c -o objects/version.o 2309 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2310 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 2311 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2312 sh $(srcdir)/link.sh 2313 2314$(MESSAGE_TEST_TARGET): auto/config.mk objects $(MESSAGE_TEST_OBJ) 2315 $(CCC) version.c -o objects/version.o 2316 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2317 -o $(MESSAGE_TEST_TARGET) $(MESSAGE_TEST_OBJ) $(ALL_LIBS)" \ 2318 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2319 sh $(srcdir)/link.sh 2320 2321# install targets 2322 2323install: $(GUI_INSTALL) 2324 2325install_normal: installvim installtools $(INSTALL_LANGS) install-icons 2326 2327install_gui_extra: installgtutorbin 2328 2329installvim: installvimbin installtutorbin \ 2330 installruntime installlinks installmanlinks 2331 2332# 2333# Avoid overwriting an existing executable, somebody might be running it and 2334# overwriting it could cause it to crash. Deleting it is OK, it won't be 2335# really deleted until all running processes for it have exited. It is 2336# renamed first, in case the deleting doesn't work. 2337# 2338# If you want to keep an older version, rename it before running "make 2339# install". 2340# 2341installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 2342 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 2343 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 2344 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 2345 fi 2346 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 2347 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 2348 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 2349# may create a link to the new executable from /usr/bin/vi 2350 -$(LINKIT) 2351 2352# Long list of arguments for the shell script that installs the manual pages 2353# for one language. 2354INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 2355 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 2356 2357# Install most of the runtime files 2358installruntime: installrtbase installmacros installpack installtutor installspell 2359 2360# install the help files; first adjust the contents for the final location 2361installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 2362 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 2363 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml \ 2364 $(DEST_PLUG) $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 2365 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 2366# Generate the help tags with ":helptags" to handle all languages. 2367# Move the distributed tags file aside and restore it, to avoid it being 2368# different from the repository. 2369 cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)" -a -f tags; then \ 2370 mv -f tags tags.dist; fi 2371 @echo generating help tags 2372 -@cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)"; then \ 2373 $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags; fi 2374 cd $(HELPSOURCE); \ 2375 files=`ls *.txt tags`; \ 2376 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 2377 $(INSTALL_DATA) $$files $(DEST_HELP); \ 2378 cd $(DEST_HELP); \ 2379 chmod $(HELPMOD) $$files 2380 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 2381 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 2382 cd $(HELPSOURCE); if test -f tags.dist; then mv -f tags.dist tags; fi 2383# install the menu files 2384 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 2385 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 2386 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 2387 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 2388 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 2389 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 2390# install the defaults/evim/mswin file 2391 $(INSTALL_DATA) $(SCRIPTSOURCE)/defaults.vim $(VIM_DEFAULTS_FILE) 2392 chmod $(VIMSCRIPTMOD) $(VIM_DEFAULTS_FILE) 2393 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 2394 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 2395 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 2396 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 2397# install the rgb.txt file 2398 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(SYS_RGB_FILE) 2399 chmod $(VIMSCRIPTMOD) $(SYS_RGB_FILE) 2400# install the bugreport file 2401 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 2402 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 2403# install the example vimrc files 2404 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 2405 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 2406 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 2407 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 2408# install the file type detection files 2409 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 2410 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 2411 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 2412 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 2413 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 2414 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 2415 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 2416 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 2417 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 2418 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 2419 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 2420 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 2421 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 2422 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 2423 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 2424 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 2425# install the print resource files 2426 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 2427 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 2428# install the colorscheme files 2429 cd $(COLSOURCE); $(INSTALL_DATA_R) *.vim tools README.txt $(DEST_COL) 2430 cd $(DEST_COL); chmod $(DIRMOD) tools 2431 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt tools/*.vim 2432# install the syntax files 2433 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 2434 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2435# install the indent files 2436 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2437 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2438# install the standard autoload files 2439 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2440 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2441 cd $(AUTOSOURCE)/dist; $(INSTALL_DATA) *.vim $(DEST_AUTO)/dist 2442 cd $(DEST_AUTO)/dist; chmod $(HELPMOD) *.vim 2443 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2444 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2445# install the standard plugin files 2446 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2447 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2448# install the ftplugin files 2449 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2450 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2451# install the compiler files 2452 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2453 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2454 2455installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2456 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2457 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2458 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2459 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2460# When using CVS some CVS directories might have been copied. 2461# Also delete AAPDIR and *.info files. 2462 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2463 if test -n "$$cvs"; then \ 2464 rm -rf $$cvs; \ 2465 fi 2466 2467installpack: $(DEST_VIM) $(DEST_RT) $(DEST_PACK) 2468 $(INSTALL_DATA_R) $(PACKSOURCE)/* $(DEST_PACK) 2469 chmod $(DIRMOD) `find $(DEST_PACK) -type d -print` 2470 chmod $(FILEMOD) `find $(DEST_PACK) -type f -print` 2471 2472# install the tutor files 2473installtutorbin: $(DEST_VIM) 2474 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2475 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2476 2477installgtutorbin: $(DEST_VIM) 2478 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2479 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2480 2481installtutor: $(DEST_RT) $(DEST_TUTOR) 2482 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2483 -rm -f $(DEST_TUTOR)/*.info 2484 chmod $(HELPMOD) $(DEST_TUTOR)/* 2485 2486# Install the spell files, if they exist. This assumes at least the English 2487# spell file is there. 2488installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2489 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2490 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2491 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2492 fi 2493 2494# install helper program xxd 2495installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2496 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2497 $(INSTALL_TOOL_LANGS) 2498 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2499 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2500 rm -f $(DEST_BIN)/xxd.rm; \ 2501 fi 2502 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2503 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2504 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2505 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2506 2507# install the runtime tools 2508 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2509# When using CVS some CVS directories might have been copied. 2510 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2511 if test -n "$$cvs"; then \ 2512 rm -rf $$cvs; \ 2513 fi 2514 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2515# replace the path in some tools 2516 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2517 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2518 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2519 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2520 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2521 2522# install the language specific files for tools, if they were unpacked 2523install-tool-languages: 2524 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2525 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2526 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2527 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2528 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2529 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2530 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2531 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2532 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2533 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2534 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2535 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2536 -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2537 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2538 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2539 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2540 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2541 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2542 2543# install the language specific files, if they were unpacked 2544install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2545 -$(SHELL) ./installman.sh install $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2546 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2547 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2548 -$(SHELL) ./installman.sh install $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2549 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2550 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2551 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2552 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2553 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2554 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2555 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2556 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2557 -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2558 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2559 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2560 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2561 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2562 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2563 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2564 $(DEST_MAN_DA) $(INSTALLMLARGS) 2565 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2566 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2567 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2568 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2569 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2570 $(DEST_MAN_DE) $(INSTALLMLARGS) 2571 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2572 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2573 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2574 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2575 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2576 $(DEST_MAN_FR) $(INSTALLMLARGS) 2577 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2578 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2579 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2580 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2581 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2582 $(DEST_MAN_IT) $(INSTALLMLARGS) 2583 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2584 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2585 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2586 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2587 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2588 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2589 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2590 $(DEST_MAN_PL) $(INSTALLMLARGS) 2591 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2592 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2593 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2594 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2595 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2596 $(DEST_MAN_RU) $(INSTALLMLARGS) 2597 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2598 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2599 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2600 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2601 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2602 fi 2603 if test -d $(LANGSOURCE); then \ 2604 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2605 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2606 fi 2607 if test -d $(KMAPSOURCE); then \ 2608 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2609 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2610 fi 2611 2612# Install the icons for KDE, if the directory exists and the icon doesn't. 2613# Always when $(DESTDIR) is not empty. 2614ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2615ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2616ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2617ICONTHEMEPATH = $(DATADIR)/icons/hicolor 2618DESKTOPPATH = $(DESTDIR)$(DATADIR)/applications 2619KDEPATH = $(HOME)/.kde/share/icons 2620install-icons: 2621 if test -n "$(DESTDIR)"; then \ 2622 $(MKDIR_P) $(ICON48PATH) $(ICON32PATH) \ 2623 $(ICON16PATH) $(DESKTOPPATH); \ 2624 fi 2625 2626 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2627 -a ! -f $(ICON48PATH)/gvim.png; then \ 2628 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2629 if test -z "$(DESTDIR)" -a -x "$(GTK_UPDATE_ICON_CACHE)" \ 2630 -a -w $(ICONTHEMEPATH) \ 2631 -a -f $(ICONTHEMEPATH)/index.theme; then \ 2632 $(GTK_UPDATE_ICON_CACHE) -q $(ICONTHEMEPATH); \ 2633 fi \ 2634 fi 2635 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2636 -a ! -f $(ICON32PATH)/gvim.png; then \ 2637 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2638 fi 2639 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2640 -a ! -f $(ICON16PATH)/gvim.png; then \ 2641 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2642 fi 2643 if test -d $(DESKTOPPATH) -a -w $(DESKTOPPATH); then \ 2644 if test -f po/vim.desktop -a -f po/gvim.desktop; then \ 2645 $(INSTALL_DATA) po/vim.desktop po/gvim.desktop \ 2646 $(DESKTOPPATH); \ 2647 else \ 2648 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim.desktop \ 2649 $(SCRIPTSOURCE)/gvim.desktop \ 2650 $(DESKTOPPATH); \ 2651 fi; \ 2652 if test -z "$(DESTDIR)" -a -x "$(UPDATE_DESKTOP_DATABASE)"; then \ 2653 $(UPDATE_DESKTOP_DATABASE) -q $(DESKTOPPATH); \ 2654 fi \ 2655 fi 2656 2657$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2658 @echo Runtime files not found. 2659 @echo You need to unpack the runtime archive before running "make install". 2660 test -f error 2661 2662$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2663 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2664 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2665 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) $(DEST_MACRO) \ 2666 $(DEST_PACK) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2667 $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_PLUG): 2668 $(MKDIR_P) $@ 2669 -chmod $(DIRMOD) $@ 2670 2671# create links from various names to vim. This is only done when the links 2672# (or executables with the same name) don't exist yet. 2673installlinks: $(GUI_TARGETS) \ 2674 $(DEST_BIN)/$(EXTARGET) \ 2675 $(DEST_BIN)/$(VIEWTARGET) \ 2676 $(DEST_BIN)/$(RVIMTARGET) \ 2677 $(DEST_BIN)/$(RVIEWTARGET) \ 2678 $(INSTALLVIMDIFF) 2679 2680installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2681 $(DEST_BIN)/$(GVIEWTARGET) \ 2682 $(DEST_BIN)/$(RGVIMTARGET) \ 2683 $(DEST_BIN)/$(RGVIEWTARGET) \ 2684 $(DEST_BIN)/$(EVIMTARGET) \ 2685 $(DEST_BIN)/$(EVIEWTARGET) \ 2686 $(INSTALLGVIMDIFF) 2687 2688installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2689installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2690 2691$(DEST_BIN)/$(EXTARGET): 2692 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2693 2694$(DEST_BIN)/$(VIEWTARGET): 2695 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2696 2697$(DEST_BIN)/$(GVIMTARGET): 2698 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2699 2700$(DEST_BIN)/$(GVIEWTARGET): 2701 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2702 2703$(DEST_BIN)/$(RVIMTARGET): 2704 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2705 2706$(DEST_BIN)/$(RVIEWTARGET): 2707 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2708 2709$(DEST_BIN)/$(RGVIMTARGET): 2710 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2711 2712$(DEST_BIN)/$(RGVIEWTARGET): 2713 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2714 2715$(DEST_BIN)/$(VIMDIFFTARGET): 2716 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2717 2718$(DEST_BIN)/$(GVIMDIFFTARGET): 2719 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2720 2721$(DEST_BIN)/$(EVIMTARGET): 2722 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2723 2724$(DEST_BIN)/$(EVIEWTARGET): 2725 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2726 2727# Create links for the manual pages with various names to vim. This is only 2728# done when the links (or manpages with the same name) don't exist yet. 2729 2730INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2731 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2732 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2733 $(GVIMDIFFNAME) $(EVIEWNAME) 2734 2735installmanlinks: 2736 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2737 $(DEST_MAN) $(INSTALLMLARGS) 2738 2739uninstall: uninstall_runtime 2740 -rm -f $(DEST_BIN)/$(VIMTARGET) 2741 -rm -f $(DEST_BIN)/vimtutor 2742 -rm -f $(DEST_BIN)/gvimtutor 2743 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2744 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2745 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2746 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2747 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2748 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2749 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2750 2751# Note: the "rmdir" will fail if any files were added after "make install" 2752uninstall_runtime: 2753 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2754 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA) "" $(INSTALLMANARGS) 2755 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_I) "" $(INSTALLMANARGS) 2756 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_U) "" $(INSTALLMANARGS) 2757 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE) "" $(INSTALLMANARGS) 2758 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_I) "" $(INSTALLMANARGS) 2759 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_U) "" $(INSTALLMANARGS) 2760 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2761 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2762 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2763 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2764 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2765 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2766 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) 2767 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2768 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2769 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2770 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2771 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2772 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2773 $(DEST_MAN) $(INSTALLMLARGS) 2774 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2775 $(DEST_MAN_DA) $(INSTALLMLARGS) 2776 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2777 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2778 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2779 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2780 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2781 $(DEST_MAN_DE) $(INSTALLMLARGS) 2782 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2783 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2784 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2785 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2786 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2787 $(DEST_MAN_FR) $(INSTALLMLARGS) 2788 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2789 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2790 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2791 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2792 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2793 $(DEST_MAN_IT) $(INSTALLMLARGS) 2794 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2795 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2796 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2797 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2798 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2799 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2800 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2801 $(DEST_MAN_PL) $(INSTALLMLARGS) 2802 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2803 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2804 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2805 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2806 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2807 $(DEST_MAN_RU) $(INSTALLMLARGS) 2808 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2809 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2810 -rm -f $(DEST_MAN)/xxd.1 2811 -rm -f $(DEST_MAN_DA)/xxd.1 $(DEST_MAN_DA_I)/xxd.1 $(DEST_MAN_DA_U)/xxd.1 2812 -rm -f $(DEST_MAN_DE)/xxd.1 $(DEST_MAN_DE_I)/xxd.1 $(DEST_MAN_DE_U)/xxd.1 2813 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2814 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2815 -rm -f $(DEST_MAN_JA_U)/xxd.1 2816 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2817 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2818 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2819 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2820 -rm -f $(SYS_RGB_FILE) 2821 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2822 -rm -f $(SYS_BUGR_FILE) $(VIM_DEFAULTS_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2823 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2824 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2825 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2826 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2827 -rm -f $(SYS_OPTWIN_FILE) 2828 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2829 -rm -rf $(DEST_COL)/tools 2830 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2831 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2832 -rm -rf $(DEST_MACRO) 2833 -rm -rf $(DEST_PACK) 2834 -rm -rf $(DEST_TUTOR) 2835 -rm -rf $(DEST_SPELL) 2836 -rm -rf $(DEST_TOOLS) 2837 -rm -rf $(DEST_LANG) 2838 -rm -rf $(DEST_KMAP) 2839 -rm -rf $(DEST_COMP) 2840 -rm -f $(DEST_PRINT)/*.ps 2841 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2842 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2843 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt 2844 -rm -f $(DEST_AUTO)/dist/*.vim $(DEST_AUTO)/xml/*.vim 2845 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2846 -rmdir $(DEST_FTP) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_AUTO) 2847 -rmdir $(DEST_PLUG) $(DEST_RT) 2848# This will fail when other Vim versions are installed, no worries. 2849 -rmdir $(DEST_VIM) 2850 2851# Clean up all the files that have been produced, except configure's. 2852# We support common typing mistakes for Juergen! :-) 2853clean celan: testclean 2854 -rm -f *.o core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2855 -rm -rf objects 2856 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c auto/gui_gtk_gresources.c auto/gui_gtk_gresources.h 2857 -rm -f conftest* *~ auto/link.sed 2858 -rm -f testdir/opt_test.vim 2859 -rm -f $(UNITTEST_TARGETS) 2860 -rm -f runtime pixmaps 2861 -rm -rf $(APPDIR) 2862 -rm -rf mzscheme_base.c 2863 -rm -rf libvterm/.libs libterm/t/.libs libvterm/src/*.o libvterm/src/*.lo libvterm/t/*.o libvterm/t/*.lo libvterm/t/harness libvterm/libvterm.la 2864 if test -d $(PODIR); then \ 2865 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2866 fi 2867 2868# Make a shadow directory for compilation on another system or with different 2869# features: 2870# % make shadow 2871# % cd shadow 2872# edit configuration in src/shadow/Makefile 2873# % make 2874# 2875# Alternatively use a link for the Makefile and run configure with flags in 2876# another way. When new source files are added use "shadowupdate": 2877# % cd shadow 2878# % rm Makefile 2879# % ln -s ../Makefile . 2880# % ./configure {options} 2881# % make 2882# And later: 2883# % git pull 2884# % make distclean shadowupdate 2885# % ./configure {options} 2886# % make 2887SHADOWDIR = shadow 2888 2889LINKEDFILES = ../*.[chm] ../*.in ../*.sh ../*.xs ../*.xbm ../gui_gtk_res.xml ../toolcheck ../proto ../libvterm ../vimtutor ../gvimtutor ../install-sh ../Make_all.mak 2890 2891shadow: runtime pixmaps 2892 $(MKDIR_P) $(SHADOWDIR) 2893 cd $(SHADOWDIR); ln -s $(LINKEDFILES) . 2894 mkdir $(SHADOWDIR)/auto 2895 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2896 $(MKDIR_P) $(SHADOWDIR)/po 2897 cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/*.in ../../po/Makefile ../../po/*.c . 2898 cd $(SHADOWDIR); rm -f auto/link.sed 2899 cp Makefile configure $(SHADOWDIR) 2900 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2901 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2902 cp config.mk.dist $(SHADOWDIR) 2903 $(MKDIR_P) $(SHADOWDIR)/xxd 2904 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2905 $(MKDIR_P) $(SHADOWDIR)/xdiff 2906 cd $(SHADOWDIR)/xdiff; ln -s ../../xdiff/*.[ch] . 2907 if test -d $(RSRC_DIR); then \ 2908 cd $(SHADOWDIR); \ 2909 ln -s ../infplist.xml .; \ 2910 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2911 fi 2912 $(MKDIR_P) $(SHADOWDIR)/testdir 2913 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2914 ../../testdir/Make_all.mak \ 2915 ../../testdir/README.txt \ 2916 ../../testdir/*.in \ 2917 ../../testdir/*.vim \ 2918 ../../testdir/*.py \ 2919 ../../testdir/python* \ 2920 ../../testdir/pyxfile \ 2921 ../../testdir/sautest \ 2922 ../../testdir/samples \ 2923 ../../testdir/dumps \ 2924 ../../testdir/test83-tags? \ 2925 ../../testdir/*.ok . 2926 2927# After updating Vim new files may have been created, use this to refresh the 2928# symbolic links in the shadow directory. This isn't guaranteed to catch all 2929# changes, running "make shadow" again might sometimes be needed. 2930shadowupdate: 2931 ln -sf $(LINKEDFILES) . 2932 2933# Link needed for doing "make install" in a shadow directory. 2934runtime: 2935 -ln -s ../runtime . 2936 2937# Link needed for doing "make" using GTK in a shadow directory. 2938pixmaps: 2939 -ln -s ../pixmaps . 2940 2941# Update the synmenu.vim file with the latest Syntax menu. 2942# This is only needed when runtime/makemenu.vim was changed. 2943menu: ./vim ../runtime/makemenu.vim 2944 ./vim -u ../runtime/makemenu.vim 2945 2946# Start configure from scratch 2947scrub scratch: 2948 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2949 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2950 touch auto/config.h 2951 cp config.mk.dist auto/config.mk 2952 2953distclean: clean scratch 2954 -rm -f tags 2955 2956dist: distclean 2957 @echo 2958 @echo Making the distribution has to be done in the top directory 2959 2960mdepend: 2961 -@rm -f Makefile~ 2962 cp Makefile Makefile~ 2963 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2964 @for i in $(ALL_SRC) ; do \ 2965 echo "$$i" ; \ 2966 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2967 $(CPP) $$i |\ 2968 grep '^# .*"\./.*\.h"' |\ 2969 sort -t'"' -u +1 -2 |\ 2970 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2971 ` >> tmp_make ; \ 2972 done 2973 mv tmp_make Makefile 2974 2975depend: 2976 -@rm -f Makefile~ 2977 cp Makefile Makefile~ 2978 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2979 -for i in $(ALL_SRC); do echo $$i; \ 2980 $(CPP_DEPEND) $$i | \ 2981 sed -e 's+^\([^ ]*\.o\)+objects/\1+' -e 's+xdiff/\.\./++g' >> tmp_make; done 2982 mv tmp_make Makefile 2983 2984# Run lint. Clean up the *.ln files that are sometimes left behind. 2985lint: 2986 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2987 -rm -f *.ln 2988 2989# Check dosinst.c with lint. 2990lintinstall: 2991 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2992 -rm -f dosinst.ln 2993 2994########################################################################### 2995 2996.c.o: 2997 $(CCC) $< 2998 2999auto/if_perl.c: if_perl.xs 3000 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 3001 $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ 3002 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 3003 3004auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 3005 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 3006 3007auto/pathdef.c: Makefile auto/config.mk 3008 -@echo creating $@ 3009 -@echo '/* pathdef.c */' > $@ 3010 -@echo '/* This file is automatically created by Makefile' >> $@ 3011 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 3012 -@echo '#include "vim.h"' >> $@ 3013 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 3014 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 3015 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 3016 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 3017 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 3018 -@if test -n "$(COMPILEDBY)"; then \ 3019 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 3020 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 3021 -@echo '";' >> $@ 3022 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 3023 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 3024 -@echo '";' >> $@ 3025 -@sh $(srcdir)/pathdef.sh 3026 3027GUI_GTK_RES_INPUTS = \ 3028 ../pixmaps/stock_vim_build_tags.png \ 3029 ../pixmaps/stock_vim_find_help.png \ 3030 ../pixmaps/stock_vim_save_all.png \ 3031 ../pixmaps/stock_vim_session_load.png \ 3032 ../pixmaps/stock_vim_session_new.png \ 3033 ../pixmaps/stock_vim_session_save.png \ 3034 ../pixmaps/stock_vim_shell.png \ 3035 ../pixmaps/stock_vim_window_maximize.png \ 3036 ../pixmaps/stock_vim_window_maximize_width.png \ 3037 ../pixmaps/stock_vim_window_minimize.png \ 3038 ../pixmaps/stock_vim_window_minimize_width.png \ 3039 ../pixmaps/stock_vim_window_split.png \ 3040 ../pixmaps/stock_vim_window_split_vertical.png 3041 3042auto/gui_gtk_gresources.c: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 3043 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml 3044auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 3045 if test -z "$(GLIB_COMPILE_RESOURCES)"; then touch $@; else \ 3046 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml; \ 3047 fi 3048 3049# All the object files are put in the "objects" directory. Since not all make 3050# commands understand putting object files in another directory, it must be 3051# specified for each file separately. 3052 3053objects: objects/.dirstamp 3054 3055objects/.dirstamp: 3056 $(MKDIR_P) objects 3057 touch objects/.dirstamp 3058 3059# All object files depend on the objects directory, so that parallel make 3060# works. Can't depend on the directory itself, its timestamp changes all the 3061# time. 3062$(ALL_OBJ): objects/.dirstamp 3063 3064objects/arabic.o: arabic.c 3065 $(CCC) -o $@ arabic.c 3066 3067objects/arglist.o: arglist.c 3068 $(CCC) -o $@ arglist.c 3069 3070objects/autocmd.o: autocmd.c 3071 $(CCC) -o $@ autocmd.c 3072 3073objects/blob.o: blob.c 3074 $(CCC) -o $@ blob.c 3075 3076objects/blowfish.o: blowfish.c 3077 $(CCC) -o $@ blowfish.c 3078 3079objects/buffer.o: buffer.c 3080 $(CCC) -o $@ buffer.c 3081 3082objects/change.o: change.c 3083 $(CCC) -o $@ change.c 3084 3085objects/charset.o: charset.c 3086 $(CCC) -o $@ charset.c 3087 3088objects/cindent.o: cindent.c 3089 $(CCC) -o $@ cindent.c 3090 3091objects/cmdexpand.o: cmdexpand.c 3092 $(CCC) -o $@ cmdexpand.c 3093 3094objects/cmdhist.o: cmdhist.c 3095 $(CCC) -o $@ cmdhist.c 3096 3097objects/crypt.o: crypt.c 3098 $(CCC) -o $@ crypt.c 3099 3100objects/crypt_zip.o: crypt_zip.c 3101 $(CCC) -o $@ crypt_zip.c 3102 3103objects/debugger.o: debugger.c 3104 $(CCC) -o $@ debugger.c 3105 3106objects/dict.o: dict.c 3107 $(CCC) -o $@ dict.c 3108 3109objects/diff.o: diff.c $(XDIFF_INCL) 3110 $(CCC) -o $@ diff.c 3111 3112objects/digraph.o: digraph.c 3113 $(CCC) -o $@ digraph.c 3114 3115objects/drawline.o: drawline.c 3116 $(CCC) -o $@ drawline.c 3117 3118objects/drawscreen.o: drawscreen.c 3119 $(CCC) -o $@ drawscreen.c 3120 3121objects/edit.o: edit.c 3122 $(CCC) -o $@ edit.c 3123 3124objects/eval.o: eval.c 3125 $(CCC) -o $@ eval.c 3126 3127objects/evalbuffer.o: evalbuffer.c 3128 $(CCC) -o $@ evalbuffer.c 3129 3130objects/evalfunc.o: evalfunc.c 3131 $(CCC) -o $@ evalfunc.c 3132 3133objects/evalvars.o: evalvars.c 3134 $(CCC) -o $@ evalvars.c 3135 3136objects/evalwindow.o: evalwindow.c 3137 $(CCC) -o $@ evalwindow.c 3138 3139objects/ex_cmds.o: ex_cmds.c 3140 $(CCC) -o $@ ex_cmds.c 3141 3142objects/ex_cmds2.o: ex_cmds2.c 3143 $(CCC) -o $@ ex_cmds2.c 3144 3145objects/ex_docmd.o: ex_docmd.c 3146 $(CCC) -o $@ ex_docmd.c 3147 3148objects/ex_eval.o: ex_eval.c 3149 $(CCC) -o $@ ex_eval.c 3150 3151objects/ex_getln.o: ex_getln.c 3152 $(CCC) -o $@ ex_getln.c 3153 3154objects/fileio.o: fileio.c 3155 $(CCC) -o $@ fileio.c 3156 3157objects/filepath.o: filepath.c 3158 $(CCC) -o $@ filepath.c 3159 3160objects/findfile.o: findfile.c 3161 $(CCC) -o $@ findfile.c 3162 3163objects/fold.o: fold.c 3164 $(CCC) -o $@ fold.c 3165 3166objects/getchar.o: getchar.c 3167 $(CCC) -o $@ getchar.c 3168 3169objects/hardcopy.o: hardcopy.c 3170 $(CCC) -o $@ hardcopy.c 3171 3172objects/hashtab.o: hashtab.c 3173 $(CCC) -o $@ hashtab.c 3174 3175objects/gui.o: gui.c 3176 $(CCC) -o $@ gui.c 3177 3178objects/gui_at_fs.o: gui_at_fs.c 3179 $(CCC) -o $@ gui_at_fs.c 3180 3181objects/gui_at_sb.o: gui_at_sb.c 3182 $(CCC) -o $@ gui_at_sb.c 3183 3184objects/gui_athena.o: gui_athena.c 3185 $(CCC) -o $@ gui_athena.c 3186 3187objects/beval.o: beval.c 3188 $(CCC) -o $@ beval.c 3189 3190objects/gui_beval.o: gui_beval.c 3191 $(CCC) -o $@ gui_beval.c 3192 3193objects/gui_gtk.o: gui_gtk.c 3194 $(CCC) -o $@ gui_gtk.c 3195 3196objects/gui_gtk_f.o: gui_gtk_f.c 3197 $(CCC) -o $@ gui_gtk_f.c 3198 3199objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3200 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/gui_gtk_gresources.c 3201 3202objects/gui_gtk_x11.o: gui_gtk_x11.c 3203 $(CCC) -o $@ gui_gtk_x11.c 3204 3205objects/gui_motif.o: gui_motif.c 3206 $(CCC) -o $@ gui_motif.c 3207 3208objects/gui_xmdlg.o: gui_xmdlg.c 3209 $(CCC) -o $@ gui_xmdlg.c 3210 3211objects/gui_xmebw.o: gui_xmebw.c 3212 $(CCC) -o $@ gui_xmebw.c 3213 3214objects/gui_x11.o: gui_x11.c 3215 $(CCC) -o $@ gui_x11.c 3216 3217objects/gui_photon.o: gui_photon.c 3218 $(CCC) -o $@ gui_photon.c 3219 3220objects/gui_mac.o: gui_mac.c 3221 $(CCC) -o $@ gui_mac.c 3222 3223objects/hangulin.o: hangulin.c 3224 $(CCC) -o $@ hangulin.c 3225 3226objects/highlight.o: highlight.c 3227 $(CCC) -o $@ highlight.c 3228 3229objects/if_cscope.o: if_cscope.c 3230 $(CCC) -o $@ if_cscope.c 3231 3232objects/if_xcmdsrv.o: if_xcmdsrv.c 3233 $(CCC) -o $@ if_xcmdsrv.c 3234 3235objects/if_lua.o: if_lua.c 3236 $(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) -o $@ if_lua.c 3237 3238objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 3239 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 3240 3241mzscheme_base.c: 3242 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 3243 3244objects/if_perl.o: auto/if_perl.c 3245 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/if_perl.c 3246 3247objects/if_perlsfio.o: if_perlsfio.c 3248 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ if_perlsfio.c 3249 3250objects/if_python.o: if_python.c if_py_both.h 3251 $(CCC_NF) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python.c 3252 3253objects/if_python3.o: if_python3.c if_py_both.h 3254 $(CCC_NF) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python3.c 3255 3256objects/if_ruby.o: if_ruby.c 3257 $(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) -o $@ if_ruby.c 3258 3259objects/if_tcl.o: if_tcl.c 3260 $(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ if_tcl.c 3261 3262objects/indent.o: indent.c 3263 $(CCC) -o $@ indent.c 3264 3265objects/insexpand.o: insexpand.c 3266 $(CCC) -o $@ insexpand.c 3267 3268objects/json.o: json.c 3269 $(CCC) -o $@ json.c 3270 3271objects/json_test.o: json_test.c 3272 $(CCC) -o $@ json_test.c 3273 3274objects/kword_test.o: kword_test.c 3275 $(CCC) -o $@ kword_test.c 3276 3277objects/list.o: list.c 3278 $(CCC) -o $@ list.c 3279 3280objects/main.o: main.c 3281 $(CCC) -o $@ main.c 3282 3283objects/map.o: map.c 3284 $(CCC) -o $@ map.c 3285 3286objects/mark.o: mark.c 3287 $(CCC) -o $@ mark.c 3288 3289objects/memfile.o: memfile.c 3290 $(CCC) -o $@ memfile.c 3291 3292objects/memfile_test.o: memfile_test.c 3293 $(CCC) -o $@ memfile_test.c 3294 3295objects/memline.o: memline.c 3296 $(CCC) -o $@ memline.c 3297 3298objects/menu.o: menu.c 3299 $(CCC) -o $@ menu.c 3300 3301objects/message.o: message.c 3302 $(CCC) -o $@ message.c 3303 3304objects/message_test.o: message_test.c 3305 $(CCC) -o $@ message_test.c 3306 3307objects/misc1.o: misc1.c 3308 $(CCC) -o $@ misc1.c 3309 3310objects/misc2.o: misc2.c 3311 $(CCC) -o $@ misc2.c 3312 3313objects/mouse.o: mouse.c 3314 $(CCC) -o $@ mouse.c 3315 3316objects/move.o: move.c 3317 $(CCC) -o $@ move.c 3318 3319objects/mbyte.o: mbyte.c 3320 $(CCC) -o $@ mbyte.c 3321 3322objects/normal.o: normal.c 3323 $(CCC) -o $@ normal.c 3324 3325objects/ops.o: ops.c 3326 $(CCC) -o $@ ops.c 3327 3328objects/option.o: option.c optiondefs.h 3329 $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ option.c 3330 3331objects/optionstr.o: optionstr.c 3332 $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ optionstr.c 3333 3334objects/os_beos.o: os_beos.c 3335 $(CCC) -o $@ os_beos.c 3336 3337objects/os_qnx.o: os_qnx.c 3338 $(CCC) -o $@ os_qnx.c 3339 3340objects/os_macosx.o: os_macosx.m 3341 $(CCC) -o $@ os_macosx.m 3342 3343objects/os_mac_conv.o: os_mac_conv.c 3344 $(CCC) -o $@ os_mac_conv.c 3345 3346objects/os_unix.o: os_unix.c 3347 $(CCC) -o $@ os_unix.c 3348 3349objects/os_mswin.o: os_mswin.c 3350 $(CCC) -o $@ os_mswin.c 3351 3352objects/winclip.o: winclip.c 3353 $(CCC) -o $@ winclip.c 3354 3355objects/pathdef.o: auto/pathdef.c 3356 $(CCC) -o $@ auto/pathdef.c 3357 3358objects/popupmenu.o: popupmenu.c 3359 $(CCC) -o $@ popupmenu.c 3360 3361objects/popupwin.o: popupwin.c 3362 $(CCC) -o $@ popupwin.c 3363 3364objects/profiler.o: profiler.c 3365 $(CCC) -o $@ profiler.c 3366 3367objects/pty.o: pty.c 3368 $(CCC) -o $@ pty.c 3369 3370objects/quickfix.o: quickfix.c 3371 $(CCC) -o $@ quickfix.c 3372 3373objects/regexp.o: regexp.c regexp_bt.c regexp_nfa.c 3374 $(CCC) -o $@ regexp.c 3375 3376objects/register.o: register.c 3377 $(CCC) -o $@ register.c 3378 3379objects/scriptfile.o: scriptfile.c 3380 $(CCC) -o $@ scriptfile.c 3381 3382objects/screen.o: screen.c 3383 $(CCC) -o $@ screen.c 3384 3385objects/search.o: search.c 3386 $(CCC) -o $@ search.c 3387 3388objects/session.o: session.c 3389 $(CCC) -o $@ session.c 3390 3391objects/sha256.o: sha256.c 3392 $(CCC) -o $@ sha256.c 3393 3394objects/sign.o: sign.c 3395 $(CCC) -o $@ sign.c 3396 3397objects/sound.o: sound.c 3398 $(CCC) -o $@ sound.c 3399 3400objects/spell.o: spell.c 3401 $(CCC) -o $@ spell.c 3402 3403objects/spellfile.o: spellfile.c 3404 $(CCC) -o $@ spellfile.c 3405 3406objects/spellsuggest.o: spellsuggest.c 3407 $(CCC) -o $@ spellsuggest.c 3408 3409objects/syntax.o: syntax.c 3410 $(CCC) -o $@ syntax.c 3411 3412objects/tag.o: tag.c 3413 $(CCC) -o $@ tag.c 3414 3415objects/term.o: term.c 3416 $(CCC) -o $@ term.c 3417 3418objects/terminal.o: terminal.c $(TERM_DEPS) 3419 $(CCC) -o $@ terminal.c 3420 3421objects/testing.o: testing.c 3422 $(CCC) -o $@ testing.c 3423 3424objects/textprop.o: textprop.c 3425 $(CCC) -o $@ textprop.c 3426 3427objects/ui.o: ui.c 3428 $(CCC) -o $@ ui.c 3429 3430objects/undo.o: undo.c 3431 $(CCC) -o $@ undo.c 3432 3433objects/usercmd.o: usercmd.c 3434 $(CCC) -o $@ usercmd.c 3435 3436objects/userfunc.o: userfunc.c 3437 $(CCC) -o $@ userfunc.c 3438 3439objects/viminfo.o: viminfo.c 3440 $(CCC) -o $@ viminfo.c 3441 3442objects/window.o: window.c 3443 $(CCC) -o $@ window.c 3444 3445objects/bufwrite.o: bufwrite.c 3446 $(CCC) -o $@ bufwrite.c 3447 3448objects/netbeans.o: netbeans.c 3449 $(CCC) -o $@ netbeans.c 3450 3451objects/channel.o: channel.c 3452 $(CCC) -o $@ channel.c 3453 3454Makefile: 3455 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 3456 3457# Build rules for libvterm. Putting them here allows for adding compilation 3458# options specific for Vim. Since the .o files go into objects/ we do need to 3459# prefix vterm_ to avoid name clashes. 3460CCCTERM = $(CCC_NF) $(VTERM_CFLAGS) $(ALL_CFLAGS) -DINLINE="" \ 3461 -DVSNPRINTF=vim_vsnprintf \ 3462 -DIS_COMBINING_FUNCTION=utf_iscomposing_uint \ 3463 -DWCWIDTH_FUNCTION=utf_uint2cells 3464 3465objects/vterm_encoding.o: libvterm/src/encoding.c $(TERM_DEPS) 3466 $(CCCTERM) -o $@ libvterm/src/encoding.c 3467 3468objects/vterm_keyboard.o: libvterm/src/keyboard.c $(TERM_DEPS) 3469 $(CCCTERM) -o $@ libvterm/src/keyboard.c 3470 3471objects/vterm_mouse.o: libvterm/src/mouse.c $(TERM_DEPS) 3472 $(CCCTERM) -o $@ libvterm/src/mouse.c 3473 3474objects/vterm_parser.o: libvterm/src/parser.c $(TERM_DEPS) 3475 $(CCCTERM) -o $@ libvterm/src/parser.c 3476 3477objects/vterm_pen.o: libvterm/src/pen.c $(TERM_DEPS) 3478 $(CCCTERM) -o $@ libvterm/src/pen.c 3479 3480objects/vterm_screen.o: libvterm/src/screen.c $(TERM_DEPS) 3481 $(CCCTERM) -o $@ libvterm/src/screen.c 3482 3483objects/vterm_state.o: libvterm/src/state.c $(TERM_DEPS) 3484 $(CCCTERM) -o $@ libvterm/src/state.c 3485 3486objects/vterm_unicode.o: libvterm/src/unicode.c $(TERM_DEPS) 3487 $(CCCTERM) -o $@ libvterm/src/unicode.c 3488 3489objects/vterm_vterm.o: libvterm/src/vterm.c $(TERM_DEPS) 3490 $(CCCTERM) -o $@ libvterm/src/vterm.c 3491 3492CCCDIFF = $(CCC_NF) $(ALL_CFLAGS) 3493 3494objects/xdiffi.o: xdiff/xdiffi.c $(XDIFF_INCL) 3495 $(CCCDIFF) -o $@ xdiff/xdiffi.c 3496 3497objects/xprepare.o: xdiff/xprepare.c $(XDIFF_INCL) 3498 $(CCCDIFF) -o $@ xdiff/xprepare.c 3499 3500objects/xutils.o: xdiff/xutils.c $(XDIFF_INCL) 3501 $(CCCDIFF) -o $@ xdiff/xutils.c 3502 3503objects/xemit.o: xdiff/xemit.c $(XDIFF_INCL) 3504 $(CCCDIFF) -o $@ xdiff/xemit.c 3505 3506objects/xhistogram.o: xdiff/xhistogram.c $(XDIFF_INCL) 3507 $(CCCDIFF) -o $@ xdiff/xhistogram.c 3508 3509objects/xpatience.o: xdiff/xpatience.c $(XDIFF_INCL) 3510 $(CCCDIFF) -o $@ xdiff/xpatience.c 3511 3512 3513############################################################################### 3514### MacOS X installation 3515### 3516### This installs a runnable Vim.app in $(prefix) 3517 3518REZ = /Developer/Tools/Rez 3519RESDIR = $(APPDIR)/Contents/Resources 3520VERSION = $(VIMMAJOR).$(VIMMINOR) 3521 3522### Common flags 3523M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 3524 -DAPP_VER=$(VERSION) 3525 3526install_macosx: gui_bundle 3527# Remove the link to the runtime dir, don't want to copy all of that. 3528 -rm $(RESDIR)/vim/runtime 3529 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 3530# Generate the help tags file now, it won't work with "make installruntime". 3531 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 3532# Install the runtime files. Recursive! 3533 $(MKDIR_P) $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3534 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 3535 VIMEXE=$$srcdir/$(VIMTARGET) \ 3536 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3537 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 3538 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 3539 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3540 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 3541# Put the link back. 3542 ln -s `pwd`/../runtime $(RESDIR)/vim 3543# Copy rgb.txt, Mac doesn't always have X11 3544 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3545# TODO: Create the vimtutor and/or gvimtutor application. 3546 3547gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 3548 bundle-language 3549 3550$(RESDIR): 3551 $(MKDIR_P) $@ 3552 3553bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 3554# Make a link to the runtime directory, so that we can try out the executable 3555# without installing it. 3556 $(MKDIR_P) $(RESDIR)/vim 3557 -ln -s `pwd`/../runtime $(RESDIR)/vim 3558 3559bundle-executable: $(VIMTARGET) 3560 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3561 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 3562 3563bundle-info: bundle-dir 3564 @echo "Creating PkgInfo" 3565 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 3566 @echo "Creating Info.plist" 3567 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 3568 3569bundle-resource: bundle-dir bundle-rsrc 3570 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 3571 3572### Classic resources 3573# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 3574# This file is also required for OS X Vim. 3575bundle-rsrc: os_mac.rsr.hqx 3576 @echo "Creating resource fork" 3577 python dehqx.py $< 3578 rm -f gui_mac.rsrc 3579 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 3580 3581# po/Make_osx.pl says something about generating a Mac message file 3582# for Ukrainian. Would somebody using Mac OS X in Ukrainian 3583# *really* be upset that Carbon Vim was not localised in 3584# Ukrainian? 3585# 3586#bundle-language: bundle-dir po/Make_osx.pl 3587# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 3588bundle-language: bundle-dir 3589 3590$(APPDIR)/Contents: 3591 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3592 $(MKDIR_P) $(RESDIR)/English.lproj 3593 3594 3595############################################################################### 3596### (automatically generated by 'make depend') 3597### Dependencies: 3598objects/arabic.o: arabic.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3599 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3600 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3601 proto.h globals.h 3602objects/arglist.o: arglist.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3603 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3604 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3605 proto.h globals.h 3606objects/autocmd.o: autocmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3607 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3608 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3609 proto.h globals.h 3610objects/beval.o: beval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3611 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3612 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3613 proto.h globals.h 3614objects/blob.o: blob.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3615 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3616 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3617 proto.h globals.h 3618objects/blowfish.o: blowfish.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3619 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3620 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3621 proto.h globals.h 3622objects/buffer.o: buffer.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3623 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3624 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3625 proto.h globals.h version.h 3626objects/change.o: change.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3627 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3628 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3629 proto.h globals.h version.h 3630objects/charset.o: charset.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3631 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3632 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3633 proto.h globals.h 3634objects/cindent.o: cindent.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3635 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3636 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3637 proto.h globals.h 3638objects/cmdexpand.o: cmdexpand.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3639 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3640 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3641 proto.h globals.h 3642objects/cmdhist.o: cmdhist.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3643 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3644 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3645 proto.h globals.h 3646objects/crypt.o: crypt.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3647 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3648 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3649 proto.h globals.h 3650objects/crypt_zip.o: crypt_zip.c vim.h protodef.h auto/config.h feature.h \ 3651 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3652 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3653 proto.h globals.h 3654objects/debugger.o: debugger.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3655 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3656 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3657 proto.h globals.h 3658objects/dict.o: dict.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3659 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3660 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3661 proto.h globals.h 3662objects/diff.o: diff.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3663 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3664 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3665 proto.h globals.h xdiff/xdiff.h vim.h 3666objects/digraph.o: digraph.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3667 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3668 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3669 proto.h globals.h 3670objects/drawline.o: drawline.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3671 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3672 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3673 proto.h globals.h 3674objects/drawscreen.o: drawscreen.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3675 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3676 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3677 proto.h globals.h 3678objects/edit.o: edit.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3679 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3680 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3681 proto.h globals.h 3682objects/eval.o: eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3683 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3684 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3685 proto.h globals.h version.h 3686objects/evalbuffer.o: evalbuffer.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3687 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3688 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3689 proto.h globals.h version.h 3690objects/evalfunc.o: evalfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3691 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3692 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3693 proto.h globals.h version.h 3694objects/evalvars.o: evalvars.c vim.h protodef.h auto/config.h feature.h \ 3695 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3696 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3697 proto.h globals.h 3698objects/evalwindow.o: evalwindow.c vim.h protodef.h auto/config.h feature.h \ 3699 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3700 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3701 proto.h globals.h 3702objects/ex_cmds.o: ex_cmds.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3703 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3704 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3705 proto.h globals.h version.h 3706objects/ex_cmds2.o: ex_cmds2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3707 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3708 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3709 proto.h globals.h version.h 3710objects/ex_docmd.o: ex_docmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3711 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3712 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3713 proto.h globals.h ex_cmdidxs.h 3714objects/ex_eval.o: ex_eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3715 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3716 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3717 proto.h globals.h 3718objects/ex_getln.o: ex_getln.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3719 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3720 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3721 proto.h globals.h 3722objects/fileio.o: fileio.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3723 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3724 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3725 proto.h globals.h 3726objects/filepath.o: filepath.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3727 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3728 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3729 proto.h globals.h 3730objects/findfile.o: findfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3731 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3732 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3733 proto.h globals.h 3734objects/fold.o: fold.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3735 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3736 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3737 proto.h globals.h 3738objects/getchar.o: getchar.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3739 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3740 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3741 proto.h globals.h 3742objects/hardcopy.o: hardcopy.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3743 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3744 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3745 proto.h globals.h version.h 3746objects/hashtab.o: hashtab.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3747 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3748 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3749 proto.h globals.h 3750objects/highlight.o: highlight.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3751 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3752 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3753 proto.h globals.h 3754objects/if_cscope.o: if_cscope.c vim.h protodef.h auto/config.h feature.h \ 3755 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3756 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3757 proto.h globals.h if_cscope.h 3758objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h protodef.h auto/config.h feature.h \ 3759 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3760 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3761 proto.h globals.h version.h 3762objects/indent.o: indent.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3763 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3764 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3765 proto.h globals.h 3766objects/insexpand.o: insexpand.c vim.h protodef.h auto/config.h feature.h \ 3767 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3768 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3769 proto.h globals.h 3770objects/json.o: json.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3771 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3772 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3773 proto.h globals.h 3774objects/list.o: list.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3775 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3776 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3777 proto.h globals.h 3778objects/main.o: main.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3779 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3780 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3781 proto.h globals.h 3782objects/map.o: map.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3783 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3784 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3785 proto.h globals.h 3786objects/mark.o: mark.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3787 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3788 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3789 proto.h globals.h 3790objects/memfile.o: memfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3791 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3792 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3793 proto.h globals.h 3794objects/memline.o: memline.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3795 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3796 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3797 proto.h globals.h 3798objects/menu.o: menu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3799 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3800 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3801 proto.h globals.h 3802objects/message.o: message.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3803 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3804 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3805 proto.h globals.h 3806objects/misc1.o: misc1.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3807 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3808 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3809 proto.h globals.h version.h 3810objects/misc2.o: misc2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3811 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3812 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3813 proto.h globals.h 3814objects/mouse.o: mouse.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3815 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3816 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3817 proto.h globals.h 3818objects/move.o: move.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3819 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3820 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3821 proto.h globals.h 3822objects/mbyte.o: mbyte.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3823 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3824 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3825 proto.h globals.h 3826objects/normal.o: normal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3827 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3828 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3829 proto.h globals.h 3830objects/ops.o: ops.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3831 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3832 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3833 proto.h globals.h 3834objects/option.o: option.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3835 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3836 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3837 proto.h globals.h optiondefs.h 3838objects/optionstr.o: optionstr.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3839 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3840 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3841 proto.h globals.h 3842objects/os_unix.o: os_unix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3843 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3844 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3845 proto.h globals.h os_unixx.h 3846objects/pathdef.o: auto/pathdef.c vim.h protodef.h auto/config.h feature.h \ 3847 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3848 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3849 proto.h globals.h 3850objects/popupmenu.o: popupmenu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3851 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3852 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3853 proto.h globals.h 3854objects/popupwin.o: popupwin.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3855 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3856 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3857 proto.h globals.h 3858objects/profiler.o: profiler.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3859 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3860 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3861 proto.h globals.h 3862objects/pty.o: pty.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3863 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3864 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3865 proto.h globals.h 3866objects/quickfix.o: quickfix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3867 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3868 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3869 proto.h globals.h 3870objects/regexp.o: regexp.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3871 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3872 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3873 proto.h globals.h regexp_bt.c regexp_nfa.c 3874objects/register.o: register.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3875 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3876 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3877 proto.h globals.h 3878objects/scriptfile.o: scriptfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3879 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3880 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3881 proto.h globals.h 3882objects/screen.o: screen.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3883 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3884 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3885 proto.h globals.h 3886objects/search.o: search.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3887 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3888 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3889 proto.h globals.h 3890objects/session.o: session.c vim.h protodef.h auto/config.h feature.h \ 3891 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3892 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3893 proto.h globals.h 3894objects/sha256.o: sha256.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3895 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3896 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3897 proto.h globals.h 3898objects/sign.o: sign.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3899 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3900 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3901 proto.h globals.h 3902objects/sound.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3903 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3904 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3905 proto.h globals.h 3906objects/spell.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3907 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3908 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3909 proto.h globals.h 3910objects/spellfile.o: spellfile.c vim.h protodef.h auto/config.h feature.h \ 3911 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3912 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3913 proto.h globals.h 3914objects/spellsuggest.o: spellsuggest.c vim.h protodef.h auto/config.h feature.h \ 3915 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3916 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3917 proto.h globals.h 3918objects/syntax.o: syntax.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3919 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3920 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3921 proto.h globals.h 3922objects/tag.o: tag.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3923 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3924 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3925 proto.h globals.h 3926objects/term.o: term.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3927 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3928 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3929 proto.h globals.h libvterm/include/vterm.h \ 3930 libvterm/include/vterm_keycodes.h 3931objects/terminal.o: terminal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3932 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3933 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3934 proto.h globals.h libvterm/include/vterm.h \ 3935 libvterm/include/vterm_keycodes.h 3936objects/testing.o: testing.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3937 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3938 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3939 proto.h globals.h 3940objects/textprop.o: textprop.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3941 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3942 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3943 proto.h globals.h 3944objects/ui.o: ui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3945 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3946 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3947 proto.h globals.h 3948objects/undo.o: undo.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3949 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3950 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3951 proto.h globals.h 3952objects/usercmd.o: usercmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3953 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3954 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3955 proto.h globals.h 3956objects/userfunc.o: userfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3957 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3958 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3959 proto.h globals.h 3960objects/version.o: version.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3961 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3962 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3963 proto.h globals.h version.h 3964objects/viminfo.o: viminfo.c vim.h protodef.h auto/config.h feature.h \ 3965 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3966 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3967 proto.h globals.h 3968objects/window.o: window.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3969 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3970 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3971 proto.h globals.h 3972objects/bufwrite.o: bufwrite.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3973 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3974 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3975 proto.h globals.h 3976objects/gui.o: gui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3977 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3978 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3979 proto.h globals.h 3980objects/gui_gtk.o: gui_gtk.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3981 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3982 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3983 proto.h globals.h gui_gtk_f.h 3984objects/gui_gtk_f.o: gui_gtk_f.c vim.h protodef.h auto/config.h feature.h \ 3985 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3986 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3987 proto.h globals.h gui_gtk_f.h 3988objects/gui_motif.o: gui_motif.c vim.h protodef.h auto/config.h feature.h \ 3989 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3990 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3991 proto.h globals.h gui_xmebw.h ../pixmaps/alert.xpm ../pixmaps/error.xpm \ 3992 ../pixmaps/generic.xpm ../pixmaps/info.xpm ../pixmaps/quest.xpm \ 3993 gui_x11_pm.h ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm \ 3994 ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm \ 3995 ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm \ 3996 ../pixmaps/tb_find.xpm ../pixmaps/tb_find_next.xpm \ 3997 ../pixmaps/tb_find_prev.xpm ../pixmaps/tb_find_help.xpm \ 3998 ../pixmaps/tb_exit.xpm ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm \ 3999 ../pixmaps/tb_help.xpm ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 4000 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 4001 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 4002 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 4003 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 4004 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 4005 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 4006 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 4007 ../pixmaps/tb_minwidth.xpm 4008objects/gui_xmdlg.o: gui_xmdlg.c vim.h protodef.h auto/config.h feature.h \ 4009 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4010 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4011 proto.h globals.h 4012objects/gui_xmebw.o: gui_xmebw.c vim.h protodef.h auto/config.h feature.h \ 4013 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4014 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4015 proto.h globals.h gui_xmebwp.h gui_xmebw.h 4016objects/gui_athena.o: gui_athena.c vim.h protodef.h auto/config.h feature.h \ 4017 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4018 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4019 proto.h globals.h gui_at_sb.h gui_x11_pm.h ../pixmaps/tb_new.xpm \ 4020 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 4021 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 4022 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 4023 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 4024 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 4025 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 4026 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 4027 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 4028 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 4029 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 4030 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 4031 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 4032 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 4033 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 4034 ../pixmaps/tb_minwidth.xpm 4035objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h protodef.h auto/config.h feature.h \ 4036 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4037 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4038 proto.h globals.h auto/gui_gtk_gresources.h gui_gtk_f.h \ 4039 ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 4040objects/gui_x11.o: gui_x11.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 4041 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4042 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4043 proto.h globals.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 4044 ../runtime/vim48x48.xpm 4045objects/gui_at_sb.o: gui_at_sb.c vim.h protodef.h auto/config.h feature.h \ 4046 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4047 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4048 proto.h globals.h gui_at_sb.h 4049objects/gui_at_fs.o: gui_at_fs.c vim.h protodef.h auto/config.h feature.h \ 4050 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4051 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4052 proto.h globals.h gui_at_sb.h 4053objects/json_test.o: json_test.c main.c vim.h protodef.h auto/config.h feature.h \ 4054 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4055 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4056 proto.h globals.h json.c 4057objects/kword_test.o: kword_test.c main.c vim.h protodef.h auto/config.h \ 4058 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 4059 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 4060 ex_cmds.h spell.h proto.h globals.h charset.c 4061objects/memfile_test.o: memfile_test.c main.c vim.h protodef.h auto/config.h \ 4062 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 4063 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 4064 ex_cmds.h spell.h proto.h globals.h memfile.c 4065objects/message_test.o: message_test.c main.c vim.h protodef.h auto/config.h \ 4066 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 4067 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 4068 ex_cmds.h spell.h proto.h globals.h message.c 4069objects/hangulin.o: hangulin.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 4070 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4071 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4072 proto.h globals.h 4073objects/if_lua.o: if_lua.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 4074 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4075 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4076 proto.h globals.h 4077objects/if_mzsch.o: if_mzsch.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 4078 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4079 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4080 proto.h globals.h if_mzsch.h 4081objects/if_perl.o: auto/if_perl.c vim.h protodef.h auto/config.h feature.h \ 4082 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4083 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4084 proto.h globals.h 4085objects/if_perlsfio.o: if_perlsfio.c vim.h protodef.h auto/config.h feature.h \ 4086 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4087 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4088 proto.h globals.h 4089objects/if_python.o: if_python.c vim.h protodef.h auto/config.h feature.h \ 4090 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4091 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4092 proto.h globals.h if_py_both.h 4093objects/if_python3.o: if_python3.c vim.h protodef.h auto/config.h feature.h \ 4094 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4095 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4096 proto.h globals.h if_py_both.h 4097objects/if_tcl.o: if_tcl.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 4098 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4099 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4100 proto.h globals.h 4101objects/if_ruby.o: if_ruby.c protodef.h auto/config.h vim.h feature.h os_unix.h \ 4102 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4103 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4104 proto.h globals.h version.h 4105objects/gui_beval.o: gui_beval.c vim.h protodef.h auto/config.h feature.h \ 4106 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4107 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4108 proto.h globals.h 4109objects/netbeans.o: netbeans.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 4110 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4111 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4112 proto.h globals.h version.h 4113objects/channel.o: channel.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 4114 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 4115 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 4116 proto.h globals.h 4117objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 4118objects/vterm_encoding.o: libvterm/src/encoding.c libvterm/src/vterm_internal.h \ 4119 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 4120 libvterm/src/encoding/DECdrawing.inc libvterm/src/encoding/uk.inc 4121objects/vterm_keyboard.o: libvterm/src/keyboard.c libvterm/src/vterm_internal.h \ 4122 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 4123 libvterm/src/utf8.h 4124objects/vterm_mouse.o: libvterm/src/mouse.c libvterm/src/vterm_internal.h \ 4125 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 4126 libvterm/src/utf8.h 4127objects/vterm_parser.o: libvterm/src/parser.c libvterm/src/vterm_internal.h \ 4128 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 4129objects/vterm_pen.o: libvterm/src/pen.c libvterm/src/vterm_internal.h \ 4130 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 4131objects/vterm_state.o: libvterm/src/state.c libvterm/src/vterm_internal.h \ 4132 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 4133objects/vterm_screen.o: libvterm/src/screen.c libvterm/src/vterm_internal.h \ 4134 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 4135 libvterm/src/rect.h libvterm/src/utf8.h 4136objects/vterm_unicode.o: libvterm/src/unicode.c libvterm/src/vterm_internal.h \ 4137 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 4138objects/vterm_vterm.o: libvterm/src/vterm.c libvterm/src/vterm_internal.h \ 4139 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 4140 libvterm/src/utf8.h 4141objects/xdiffi.o: xdiff/xdiffi.c xdiff/xinclude.h auto/config.h \ 4142 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 4143 auto/config.h feature.h os_unix.h \ 4144 auto/osdef.h ascii.h keymap.h term.h \ 4145 macros.h option.h beval.h proto/gui_beval.pro \ 4146 structs.h regexp.h gui.h alloc.h \ 4147 ex_cmds.h spell.h proto.h globals.h \ 4148 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 4149 xdiff/xemit.h 4150objects/xemit.o: xdiff/xemit.c xdiff/xinclude.h auto/config.h \ 4151 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 4152 auto/config.h feature.h os_unix.h \ 4153 auto/osdef.h ascii.h keymap.h term.h \ 4154 macros.h option.h beval.h proto/gui_beval.pro \ 4155 structs.h regexp.h gui.h alloc.h \ 4156 ex_cmds.h spell.h proto.h globals.h \ 4157 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 4158 xdiff/xemit.h 4159objects/xprepare.o: xdiff/xprepare.c xdiff/xinclude.h auto/config.h \ 4160 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 4161 auto/config.h feature.h os_unix.h \ 4162 auto/osdef.h ascii.h keymap.h term.h \ 4163 macros.h option.h beval.h proto/gui_beval.pro \ 4164 structs.h regexp.h gui.h alloc.h \ 4165 ex_cmds.h spell.h proto.h globals.h \ 4166 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 4167 xdiff/xemit.h 4168objects/xutils.o: xdiff/xutils.c xdiff/xinclude.h auto/config.h \ 4169 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 4170 auto/config.h feature.h os_unix.h \ 4171 auto/osdef.h ascii.h keymap.h term.h \ 4172 macros.h option.h beval.h proto/gui_beval.pro \ 4173 structs.h regexp.h gui.h alloc.h \ 4174 ex_cmds.h spell.h proto.h globals.h \ 4175 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 4176 xdiff/xemit.h 4177objects/xhistogram.o: xdiff/xhistogram.c xdiff/xinclude.h auto/config.h \ 4178 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 4179 auto/config.h feature.h os_unix.h \ 4180 auto/osdef.h ascii.h keymap.h term.h \ 4181 macros.h option.h beval.h proto/gui_beval.pro \ 4182 structs.h regexp.h gui.h alloc.h \ 4183 ex_cmds.h spell.h proto.h globals.h \ 4184 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 4185 xdiff/xemit.h 4186objects/xpatience.o: xdiff/xpatience.c xdiff/xinclude.h auto/config.h \ 4187 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 4188 auto/config.h feature.h os_unix.h \ 4189 auto/osdef.h ascii.h keymap.h term.h \ 4190 macros.h option.h beval.h proto/gui_beval.pro \ 4191 structs.h regexp.h gui.h alloc.h \ 4192 ex_cmds.h spell.h proto.h globals.h \ 4193 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 4194 xdiff/xemit.h 4195
