xref: /sqlite-3.40.0/test/walfault.test (revision 1f55e28d)

# 2010 May 03
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this file is testing the operation of the library in
# "PRAGMA journal_mode=WAL" mode.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/malloc_common.tcl

ifcapable !wal {finish_test ; return }

#-------------------------------------------------------------------------
# This test case, walfault-1-*, simulates faults while executing a
#
#   PRAGMA journal_mode = WAL;
#
# statement immediately after creating a new database.
#
do_test walfault-1-pre-1 {
  db close
  file delete -force test.db test.db-wal test.db-journal
  faultsim_save_and_close
} {}
do_faultsim_test walfault-1 -prep {
  faultsim_restore_and_reopen
} -body {
  db eval { PRAGMA main.journal_mode = WAL }
} -test {

  faultsim_test_result {0 wal}

  # Test that the connection that encountered an error as part of
  # "PRAGMA journal_mode = WAL" and a new connection use the same
  # journal mode when accessing the database.
  #
  # If "PRAGMA journal_mode" is executed immediately, connection [db] (the
  # one that hit the error in journal_mode="WAL") might return "wal" even
  # if it failed to switch the database to WAL mode. This is not considered
  # a problem. When it tries to read the database, connection [db] correctly
  # recognizes that it is a rollback database and switches back to a
  # rollback compatible journal mode.
  #
  set jm  [db one  {SELECT * FROM sqlite_master ; PRAGMA main.journal_mode}]
  sqlite3 db2 test.db
  set jm2 [db2 one {SELECT * FROM sqlite_master ; PRAGMA main.journal_mode}]
  db2 close

  if { $jm!=$jm2 } { error "Journal modes do not match: $jm $jm2" }
  if { $testrc==0 && $jm!="wal" } { error "Journal mode is not WAL" }
}

#--------------------------------------------------------------------------
# Test case walfault-2-* tests fault injection during recovery of a
# short WAL file (a dozen frames or thereabouts).
#
do_test walfault-2-pre-1 {
  sqlite3 db test.db
  execsql {
    PRAGMA journal_mode = WAL;
    BEGIN;
      CREATE TABLE x(y, z, UNIQUE(y, z));
      INSERT INTO x VALUES(randomblob(100), randomblob(100));
    COMMIT;
    PRAGMA wal_checkpoint;

    INSERT INTO x SELECT randomblob(100), randomblob(100) FROM x;
    INSERT INTO x SELECT randomblob(100), randomblob(100) FROM x;
    INSERT INTO x SELECT randomblob(100), randomblob(100) FROM x;
  }
  execsql {
    SELECT count(*) FROM x
  }
} {8}
do_test walfault-2-pre-2 {
  faultsim_save_and_close
  faultsim_restore_and_reopen
  execsql { SELECT count(*) FROM x }
} {8}
do_faultsim_test walfault-2 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { SELECT count(*) FROM x }
} -test {
  faultsim_test_result {0 8}
  faultsim_integrity_check
}

#--------------------------------------------------------------------------
# Test fault injection while writing and checkpointing a small WAL file.
#
do_test walfault-3-pre-1 {
  sqlite3 db test.db
  execsql {
    PRAGMA auto_vacuum = 1;
    PRAGMA journal_mode = WAL;
    CREATE TABLE abc(a PRIMARY KEY);
    INSERT INTO abc VALUES(randomblob(1500));
  }
  db close
  faultsim_save_and_close
} {}

do_faultsim_test walfault-3 -prep {
  faultsim_restore_and_reopen
} -body {
  db eval {
    DELETE FROM abc;
    PRAGMA wal_checkpoint;
  }
} -test {
  faultsim_test_result {0 {}}
}

file delete -force test.db test.db-wal test.db-journal
faultsim_save_and_close
do_faultsim_test walfault-4 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql {
    PRAGMA journal_mode = WAL;
    CREATE TABLE t1(a PRIMARY KEY, b);
    INSERT INTO t1 VALUES('a', 'b');
    PRAGMA wal_checkpoint;
    SELECT * FROM t1;
  }
} -test {
  faultsim_test_result {0 {wal a b}}
  faultsim_integrity_check
}

do_test walfault-5-pre-1 {
  catch { db close }
  file delete -force test.db test.db-wal test.db-journal
  sqlite3 db test.db
  execsql {
    PRAGMA page_size = 512;
    PRAGMA journal_mode = WAL;
  }
  faultsim_save_and_close
} {}
do_faultsim_test walfault-5 -faults shmerr* -prep {
  faultsim_restore_and_reopen
  execsql { PRAGMA wal_autocheckpoint = 0 }
  shmfault filter xShmSize
} -body {
  execsql {
    CREATE TABLE t1(x);
    BEGIN;
      INSERT INTO t1 VALUES(randomblob(400));           /* 1 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 2 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 4 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 8 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 16 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 32 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 64 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 128 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 256 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 512 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 1024 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 2048 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 4096 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 8192 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 16384 */
    COMMIT;
    SELECT count(*) FROM t1;
  }
} -test {
  faultsim_test_result {0 16384}
  faultsim_integrity_check
}


do_test walfault-6-pre-1 {
  catch { db close }
  file delete -force test.db test.db-wal test.db-journal
  sqlite3 db test.db
  execsql {
    PRAGMA page_size = 512;
    PRAGMA journal_mode = WAL;
    PRAGMA wal_autocheckpoint = 0;
    CREATE TABLE t1(x);
    BEGIN;
      INSERT INTO t1 VALUES(randomblob(400));           /* 1 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 2 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 4 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 8 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 16 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 32 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 64 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 128 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 256 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 512 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 1024 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 2048 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 4096 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 8192 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 16384 */
    COMMIT;
  }
  faultsim_save_and_close
} {}
do_faultsim_test walfault-6 -faults shmerr* -prep {
  faultsim_restore_and_reopen
  shmfault filter xShmSize
} -body {
  execsql { SELECT count(*) FROM t1 }
} -test {
  faultsim_test_result {0 16384}
  faultsim_integrity_check
  set n [db one {SELECT count(*) FROM t1}]
  if {$n != 16384 && $n != 0} { error "Incorrect number of rows: $n" }
}

do_test walfault-7-pre-1 {
  faultsim_delete_and_reopen
  execsql {
    PRAGMA page_size = 512;
    PRAGMA journal_mode = WAL;
    PRAGMA wal_autocheckpoint = 0;
    CREATE TABLE t1(x);
    BEGIN;
      INSERT INTO t1 VALUES(randomblob(400));           /* 1 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 2 */
      INSERT INTO t1 SELECT randomblob(400) FROM t1;    /* 4 */
    COMMIT;
  }
  faultsim_save_and_close
} {}
do_faultsim_test walfault-7 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { SELECT count(*) FROM t1 }
} -test {
  faultsim_test_result {0 4}
  set n [db one {SELECT count(*) FROM t1}]
  if {$n != 4 && $n != 0} { error "Incorrect number of rows: $n" }
}

do_test walfault-8-pre-1 {
  faultsim_delete_and_reopen
  execsql {
    PRAGMA journal_mode = WAL;
    CREATE TABLE abc(a PRIMARY KEY);
    INSERT INTO abc VALUES(randomblob(900));
  }
  faultsim_save_and_close
} {}
do_faultsim_test walfault-8 -prep {
  faultsim_restore_and_reopen
  execsql { PRAGMA cache_size = 10 }
} -body {
  execsql {
    BEGIN;
      INSERT INTO abc SELECT randomblob(900) FROM abc;    /* 1 */
      --INSERT INTO abc SELECT randomblob(900) FROM abc;    /* 2 */
      --INSERT INTO abc SELECT randomblob(900) FROM abc;    /* 4 */
      --INSERT INTO abc SELECT randomblob(900) FROM abc;    /* 8 */
    ROLLBACK;
    SELECT count(*) FROM abc;
  }
} -test {
  faultsim_test_result {0 1}

  faultsim_integrity_check
  catch { db eval ROLLBACK }
  faultsim_integrity_check

  set n [db one {SELECT count(*) FROM abc}]
  if {$n != 1} { error "Incorrect number of rows: $n" }
}

do_test walfault-9-pre-1 {
  faultsim_delete_and_reopen
  execsql {
    PRAGMA journal_mode = WAL;
    CREATE TABLE abc(a PRIMARY KEY);
    INSERT INTO abc VALUES(randomblob(900));
  }
  faultsim_save_and_close
} {}
do_faultsim_test walfault-9 -prep {
  #if {$iFail<73} { set iFail 73 }
  #if {$iFail>73} { exit }

  faultsim_restore_and_reopen
  execsql { PRAGMA cache_size = 10 }
} -body {
  execsql {
    BEGIN;
      INSERT INTO abc SELECT randomblob(900) FROM abc;    /* 1 */
      SAVEPOINT spoint;
        INSERT INTO abc SELECT randomblob(900) FROM abc;    /* 2 */
        INSERT INTO abc SELECT randomblob(900) FROM abc;    /* 4 */
        INSERT INTO abc SELECT randomblob(900) FROM abc;    /* 8 */
      ROLLBACK TO spoint;
    COMMIT;
    SELECT count(*) FROM abc;
  }
} -test {
  faultsim_test_result {0 2}
  faultsim_integrity_check

  catch { db eval { ROLLBACK TO spoint } }
  catch { db eval { COMMIT } }
  set n [db one {SELECT count(*) FROM abc}]
  if {$n != 1 && $n != 2} { error "Incorrect number of rows: $n" }
}

#-------------------------------------------------------------------------
# When a database is checkpointed, SQLite does the following:
#
#   1. xShmLock(CHECKPOINT) to lock the WAL.
#   2. xShmGet(-1) to get a mapping to read the wal-index header.
#   3. If the mapping obtained in (2) is not large enough to cover the
#      entire wal-index, call xShmGet(nReq) to get a larger mapping.
#   4. Do the checkpoint.
#   5. Release the lock and mapping.
#
# This test case tests the outcome of an IO error in step 2.
#
proc shmfault_vfs_cb_6 {method args} {
  switch -- $::shm_state {
    0 { return SQLITE_OK }
    1 {
      if {$method == "xShmGet"} {
        set ::wal_index [tvfs shm [lindex $args 0]]
        tvfs shm [lindex $args 0] [string range $::wal_index 0 65535]
        set ::shm_state 2
      }
    }
    2 {
      if {$method == "xShmGet"} {
        tvfs shm [lindex $args 0] $::wal_index
        return SQLITE_IOERR
      }
    }
  }
  return SQLITE_OK
}
do_test walfault-shm-6.1 {
  set ::shm_state 0
  testvfs tvfs
  tvfs script shmfault_vfs_cb_6

  sqlite3 db  test.db -vfs tvfs
  sqlite3 db2 test.db -vfs tvfs

  execsql {
    PRAGMA journal_mode = WAL;
    PRAGMA wal_autocheckpoint = 0;
    CREATE TABLE t1(x);
    INSERT INTO t1 VALUES(randomblob(900));
  }
} {wal 0}
do_test walfault-shm-6.2 {
  execsql {
    PRAGMA wal_autocheckpoint = 0;
    BEGIN;
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 2 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 4 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 8 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 16 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 32 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 64 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 128 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 256 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 512 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 1024 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 2048 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 4096 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 8192 */
      INSERT INTO t1 SELECT randomblob(900) FROM t1;    /* 16384 */
    COMMIT;
  } db2
} {0}
do_test walfault-shm-6.3 {
  set ::shm_state 1
  catchsql { PRAGMA wal_checkpoint } db2
} {1 {disk I/O error}}
set ::shm_state 0
db close
db2 close
tvfs delete
unset -nocomplain ::wal_index ::shm_state

finish_test