xref: /sqlite-3.40.0/test/triggerC.test (revision 07fcc268)

# 2009 August 24
#
# The author disclaims copyright to this source code.  In place of
# a legal notice', here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
ifcapable {!trigger} {
  finish_test
  return
}

#-------------------------------------------------------------------------
# Test organization:
#
# triggerC-1.*: Haphazardly designed trigger related tests that were useful
#               during an upgrade of the triggers sub-system.
#
# triggerC-2.*:
#
# triggerC-3.*:
#
# triggerC-4.*:
#
# triggerC-5.*: Test that when recursive triggers are enabled DELETE
#               triggers are fired when rows are deleted as part of OR
#               REPLACE conflict resolution. And that they are not fired
#               if recursive triggers are not enabled.
#
# triggerC-6.*: Test that the recursive_triggers pragma returns correct
#               results when invoked without an argument.
#

# Enable recursive triggers for this file.
#
execsql { PRAGMA recursive_triggers = on }

#sqlite3_db_config_lookaside db 0 0 0

#-------------------------------------------------------------------------
# This block of tests, triggerC-1.*, are not aimed at any specific
# property of the triggers sub-system. They were created to debug
# specific problems while modifying SQLite to support recursive
# triggers. They are left here in case they can help debug the
# same problems again.
#
do_test triggerC-1.1 {
  execsql {
    CREATE TABLE t1(a, b, c);
    CREATE TABLE log(t, a1, b1, c1, a2, b2, c2);
    CREATE TRIGGER trig1 BEFORE INSERT ON t1 BEGIN
      INSERT INTO log VALUES('before', NULL, NULL, NULL, new.a, new.b, new.c);
    END;
    CREATE TRIGGER trig2 AFTER INSERT ON t1 BEGIN
      INSERT INTO log VALUES('after', NULL, NULL, NULL, new.a, new.b, new.c);
    END;
    CREATE TRIGGER trig3 BEFORE UPDATE ON t1 BEGIN
      INSERT INTO log VALUES('before', old.a,old.b,old.c, new.a,new.b,new.c);
    END;
    CREATE TRIGGER trig4 AFTER UPDATE ON t1 BEGIN
      INSERT INTO log VALUES('after', old.a,old.b,old.c, new.a,new.b,new.c);
    END;

    CREATE TRIGGER trig5 BEFORE DELETE ON t1 BEGIN
      INSERT INTO log VALUES('before', old.a,old.b,old.c, NULL,NULL,NULL);
    END;
    CREATE TRIGGER trig6 AFTER DELETE ON t1 BEGIN
      INSERT INTO log VALUES('after', old.a,old.b,old.c, NULL,NULL,NULL);
    END;
  }
} {}
do_test triggerC-1.2 {
  execsql {
    INSERT INTO t1 VALUES('A', 'B', 'C');
    SELECT * FROM log;
  }
} {before {} {} {} A B C after {} {} {} A B C}
do_test triggerC-1.3 {
  execsql { SELECT * FROM t1 }
} {A B C}
do_test triggerC-1.4 {
  execsql {
    DELETE FROM log;
    UPDATE t1 SET a = 'a';
    SELECT * FROM log;
  }
} {before A B C a B C after A B C a B C}
do_test triggerC-1.5 {
  execsql { SELECT * FROM t1 }
} {a B C}
do_test triggerC-1.6 {
  execsql {
    DELETE FROM log;
    DELETE FROM t1;
    SELECT * FROM log;
  }
} {before a B C {} {} {} after a B C {} {} {}}
do_test triggerC-1.7 {
  execsql { SELECT * FROM t1 }
} {}
do_test triggerC-1.8 {
  execsql {
    CREATE TABLE t4(a, b);
    CREATE TRIGGER t4t AFTER DELETE ON t4 BEGIN
      SELECT RAISE(ABORT, 'delete is not supported');
    END;
  }
} {}
do_test triggerC-1.9 {
  execsql { INSERT INTO t4 VALUES(1, 2) }
  catchsql { DELETE FROM t4 }
} {1 {delete is not supported}}
do_test triggerC-1.10 {
  execsql { SELECT * FROM t4 }
} {1 2}
do_test triggerC-1.11 {
  execsql {
    CREATE TABLE t5 (a primary key, b, c);
    INSERT INTO t5 values (1, 2, 3);
    CREATE TRIGGER au_tbl AFTER UPDATE ON t5 BEGIN
      UPDATE OR IGNORE t5 SET a = new.a, c = 10;
    END;
  }
} {}
do_test triggerC-1.12 {
  catchsql { UPDATE OR REPLACE t5 SET a = 4 WHERE a = 1 }
} {1 {too many levels of trigger recursion}}
do_test triggerC-1.13 {
  execsql {
    CREATE TABLE t6(a INTEGER PRIMARY KEY, b);
    INSERT INTO t6 VALUES(1, 2);
    create trigger r1 after update on t6 for each row begin
      SELECT 1;
    end;
    UPDATE t6 SET a=a;
  }
} {}
do_test triggerC-1.14 {
  execsql {
    DROP TABLE t1;
    CREATE TABLE cnt(n);
    INSERT INTO cnt VALUES(0);
    CREATE TABLE t1(a INTEGER PRIMARY KEY, b UNIQUE, c, d, e);
    CREATE INDEX t1cd ON t1(c,d);
    CREATE TRIGGER t1r1 AFTER UPDATE ON t1 BEGIN UPDATE cnt SET n=n+1; END;
    INSERT INTO t1 VALUES(1,2,3,4,5);
    INSERT INTO t1 VALUES(6,7,8,9,10);
    INSERT INTO t1 VALUES(11,12,13,14,15);
  }
} {}
do_test triggerC-1.15 {
  catchsql { UPDATE OR ROLLBACK t1 SET a=100 }
} {1 {PRIMARY KEY must be unique}}


#-------------------------------------------------------------------------
# This block of tests, triggerC-2.*, tests that recursive trigger
# programs (triggers that fire themselves) work. More specifically,
# this block focuses on recursive INSERT triggers.
#
do_test triggerC-2.1.0 {
  execsql {
    CREATE TABLE t2(a PRIMARY KEY);
  }
} {}

foreach {n tdefn rc} {
  1 {
    CREATE TRIGGER t2_trig AFTER INSERT ON t2 WHEN (new.a>0) BEGIN
      INSERT INTO t2 VALUES(new.a - 1);
    END;
  } {0 {10 9 8 7 6 5 4 3 2 1 0}}

  2 {
    CREATE TRIGGER t2_trig AFTER INSERT ON t2 BEGIN
      SELECT CASE WHEN new.a==2 THEN RAISE(IGNORE) ELSE NULL END;
      INSERT INTO t2 VALUES(new.a - 1);
    END;
  } {0 {10 9 8 7 6 5 4 3 2}}

  3 {
    CREATE TRIGGER t2_trig BEFORE INSERT ON t2 WHEN (new.a>0) BEGIN
      INSERT INTO t2 VALUES(new.a - 1);
    END;
  } {0 {0 1 2 3 4 5 6 7 8 9 10}}

  4 {
    CREATE TRIGGER t2_trig BEFORE INSERT ON t2 BEGIN
      SELECT CASE WHEN new.a==2 THEN RAISE(IGNORE) ELSE NULL END;
      INSERT INTO t2 VALUES(new.a - 1);
    END;
  } {0 {3 4 5 6 7 8 9 10}}

  5 {
    CREATE TRIGGER t2_trig BEFORE INSERT ON t2 BEGIN
      INSERT INTO t2 VALUES(new.a - 1);
    END;
  } {1 {too many levels of trigger recursion}}

  6 {
    CREATE TRIGGER t2_trig AFTER INSERT ON t2 WHEN (new.a>0) BEGIN
      INSERT OR IGNORE INTO t2 VALUES(new.a);
    END;
  } {0 10}

  7 {
    CREATE TRIGGER t2_trig BEFORE INSERT ON t2 WHEN (new.a>0) BEGIN
      INSERT OR IGNORE INTO t2 VALUES(new.a);
    END;
  } {1 {too many levels of trigger recursion}}
} {
  do_test triggerC-2.1.$n {
    catchsql { DROP TRIGGER t2_trig }
    execsql  { DELETE FROM t2 }
    execsql  $tdefn
    catchsql {
      INSERT INTO t2 VALUES(10);
      SELECT * FROM t2;
    }
  } $rc
}

do_test triggerC-2.2 {
  execsql {
    CREATE TABLE t22(x);

    CREATE TRIGGER t22a AFTER INSERT ON t22 BEGIN
      INSERT INTO t22 SELECT x + (SELECT max(x) FROM t22) FROM t22;
    END;
    CREATE TRIGGER t22b BEFORE INSERT ON t22 BEGIN
      SELECT CASE WHEN (SELECT count(*) FROM t22) >= 100
                  THEN RAISE(IGNORE)
                  ELSE NULL END;
    END;

    INSERT INTO t22 VALUES(1);
    SELECT count(*) FROM t22;
  }
} {100}

do_test triggerC-2.3 {
  execsql {
    CREATE TABLE t23(x PRIMARY KEY);

    CREATE TRIGGER t23a AFTER INSERT ON t23 BEGIN
      INSERT INTO t23 VALUES(new.x + 1);
    END;

    CREATE TRIGGER t23b BEFORE INSERT ON t23 BEGIN
      SELECT CASE WHEN new.x>500
                  THEN RAISE(IGNORE)
                  ELSE NULL END;
    END;

    INSERT INTO t23 VALUES(1);
    SELECT count(*) FROM t23;
  }
} {500}


#-----------------------------------------------------------------------
# This block of tests, triggerC-3.*, test that SQLite throws an exception
# when it detects excessive recursion.
#
do_test triggerC-3.1.1 {
  execsql {
    CREATE TABLE t3(a, b);
    CREATE TRIGGER t3i AFTER INSERT ON t3 BEGIN
      DELETE FROM t3 WHERE rowid = new.rowid;
    END;
    CREATE TRIGGER t3d AFTER DELETE ON t3 BEGIN
      INSERT INTO t3 VALUES(old.a, old.b);
    END;
  }
} {}
do_test triggerC-3.1.2 {
  catchsql { INSERT INTO t3 VALUES(0,0) }
} {1 {too many levels of trigger recursion}}
do_test triggerC-3.1.3 {
  execsql { SELECT * FROM t3 }
} {}

do_test triggerC-3.2.1 {
  execsql {
    CREATE TABLE t3b(x);
    CREATE TRIGGER t3bi AFTER INSERT ON t3b WHEN new.x<2000 BEGIN
      INSERT INTO t3b VALUES(new.x+1);
    END;
  }
  catchsql {
    INSERT INTO t3b VALUES(1);
  }
} {1 {too many levels of trigger recursion}}
do_test triggerC-3.2.2 {
  db eval {SELECT * FROM t3b}
} {}

do_test triggerC-3.3.1 {
  catchsql {
    INSERT INTO t3b VALUES(1001);
  }
} {0 {}}
do_test triggerC-3.3.2 {
  db eval {SELECT count(*), max(x), min(x) FROM t3b}
} {1000 2000 1001}

do_test triggerC-3.4.1 {
  catchsql {
    DELETE FROM t3b;
    INSERT INTO t3b VALUES(999);
  }
} {1 {too many levels of trigger recursion}}
do_test triggerC-3.4.2 {
  db eval {SELECT count(*), max(x), min(x) FROM t3b}
} {0 {} {}}

do_test triggerC-3.5.1 {
  sqlite3_limit db SQLITE_LIMIT_TRIGGER_DEPTH 100
  catchsql {
    INSERT INTO t3b VALUES(1901);
  }
} {0 {}}
do_test triggerC-3.5.2 {
  db eval {SELECT count(*), max(x), min(x) FROM t3b}
} {100 2000 1901}

do_test triggerC-3.5.3 {
  catchsql {
    DELETE FROM t3b;
    INSERT INTO t3b VALUES(1900);
  }
} {1 {too many levels of trigger recursion}}
do_test triggerC-3.5.4 {
  db eval {SELECT count(*), max(x), min(x) FROM t3b}
} {0 {} {}}

do_test triggerC-3.6.1 {
  sqlite3_limit db SQLITE_LIMIT_TRIGGER_DEPTH 1
  catchsql {
    INSERT INTO t3b VALUES(2000);
  }
} {0 {}}
do_test triggerC-3.6.2 {
  db eval {SELECT count(*), max(x), min(x) FROM t3b}
} {1 2000 2000}

do_test triggerC-3.6.3 {
  catchsql {
    DELETE FROM t3b;
    INSERT INTO t3b VALUES(1999);
  }
} {1 {too many levels of trigger recursion}}
do_test triggerC-3.6.4 {
  db eval {SELECT count(*), max(x), min(x) FROM t3b}
} {0 {} {}}
sqlite3_limit db SQLITE_LIMIT_TRIGGER_DEPTH 1000


#-----------------------------------------------------------------------
# This next block of tests, triggerC-4.*, checks that affinity
# transformations and constraint processing is performed at the correct
# times relative to BEFORE and AFTER triggers.
#
# For an INSERT statement, for each row to be inserted:
#
#   1. Apply affinities to non-rowid values to be inserted.
#   2. Fire BEFORE triggers.
#   3. Process constraints.
#   4. Insert new record.
#   5. Fire AFTER triggers.
#
# If the value of the rowid field is to be automatically assigned, it is
# set to -1 in the new.* record. Even if it is explicitly set to NULL
# by the INSERT statement.
#
# For an UPDATE statement, for each row to be deleted:
#
#   1. Apply affinities to non-rowid values to be inserted.
#   2. Fire BEFORE triggers.
#   3. Process constraints.
#   4. Insert new record.
#   5. Fire AFTER triggers.
#
# For a DELETE statement, for each row to be deleted:
#
#   1. Fire BEFORE triggers.
#   2. Remove database record.
#   3. Fire AFTER triggers.
#
# When a numeric value that as an exact integer representation is stored
# in a column with REAL affinity, it is actually stored as an integer.
# These tests check that the typeof() such values is always 'real',
# not 'integer'.
#
# triggerC-4.1.*: Check that affinity transformations are made before
#                 triggers are invoked.
#
do_test triggerC-4.1.1 {
  catchsql { DROP TABLE log }
  catchsql { DROP TABLE t4 }
  execsql {
    CREATE TABLE log(t);
    CREATE TABLE t4(a TEXT,b INTEGER,c REAL);
    CREATE TRIGGER t4bi BEFORE INSERT ON t4 BEGIN
      INSERT INTO log VALUES(new.rowid || ' ' || typeof(new.rowid) || ' ' ||
                             new.a     || ' ' || typeof(new.a)     || ' ' ||
                             new.b     || ' ' || typeof(new.b)     || ' ' ||
                             new.c     || ' ' || typeof(new.c)
      );
    END;
    CREATE TRIGGER t4ai AFTER INSERT ON t4 BEGIN
      INSERT INTO log VALUES(new.rowid || ' ' || typeof(new.rowid) || ' ' ||
                             new.a     || ' ' || typeof(new.a)     || ' ' ||
                             new.b     || ' ' || typeof(new.b)     || ' ' ||
                             new.c     || ' ' || typeof(new.c)
      );
    END;
    CREATE TRIGGER t4bd BEFORE DELETE ON t4 BEGIN
      INSERT INTO log VALUES(old.rowid || ' ' || typeof(old.rowid) || ' ' ||
                             old.a     || ' ' || typeof(old.a)     || ' ' ||
                             old.b     || ' ' || typeof(old.b)     || ' ' ||
                             old.c     || ' ' || typeof(old.c)
      );
    END;
    CREATE TRIGGER t4ad AFTER DELETE ON t4 BEGIN
      INSERT INTO log VALUES(old.rowid || ' ' || typeof(old.rowid) || ' ' ||
                             old.a     || ' ' || typeof(old.a)     || ' ' ||
                             old.b     || ' ' || typeof(old.b)     || ' ' ||
                             old.c     || ' ' || typeof(old.c)
      );
    END;
    CREATE TRIGGER t4bu BEFORE UPDATE ON t4 BEGIN
      INSERT INTO log VALUES(old.rowid || ' ' || typeof(old.rowid) || ' ' ||
                             old.a     || ' ' || typeof(old.a)     || ' ' ||
                             old.b     || ' ' || typeof(old.b)     || ' ' ||
                             old.c     || ' ' || typeof(old.c)
      );
      INSERT INTO log VALUES(new.rowid || ' ' || typeof(new.rowid) || ' ' ||
                             new.a     || ' ' || typeof(new.a)     || ' ' ||
                             new.b     || ' ' || typeof(new.b)     || ' ' ||
                             new.c     || ' ' || typeof(new.c)
      );
    END;
    CREATE TRIGGER t4au AFTER UPDATE ON t4 BEGIN
      INSERT INTO log VALUES(old.rowid || ' ' || typeof(old.rowid) || ' ' ||
                             old.a     || ' ' || typeof(old.a)     || ' ' ||
                             old.b     || ' ' || typeof(old.b)     || ' ' ||
                             old.c     || ' ' || typeof(old.c)
      );
      INSERT INTO log VALUES(new.rowid || ' ' || typeof(new.rowid) || ' ' ||
                             new.a     || ' ' || typeof(new.a)     || ' ' ||
                             new.b     || ' ' || typeof(new.b)     || ' ' ||
                             new.c     || ' ' || typeof(new.c)
      );
    END;
  }
} {}
foreach {n insert log} {

  2 {
   INSERT INTO t4 VALUES('1', '1', '1');
   DELETE FROM t4;
  } {
    -1 integer 1 text 1 integer 1.0 real
     1 integer 1 text 1 integer 1.0 real
     1 integer 1 text 1 integer 1.0 real
     1 integer 1 text 1 integer 1.0 real
  }

  3 {
   INSERT INTO t4(rowid,a,b,c) VALUES(45, 45, 45, 45);
   DELETE FROM t4;
  } {
    45 integer 45 text 45 integer 45.0 real
    45 integer 45 text 45 integer 45.0 real
    45 integer 45 text 45 integer 45.0 real
    45 integer 45 text 45 integer 45.0 real
  }

  4 {
   INSERT INTO t4(rowid,a,b,c) VALUES(-42.0, -42.0, -42.0, -42.0);
   DELETE FROM t4;
  } {
    -42 integer -42.0 text -42 integer -42.0 real
    -42 integer -42.0 text -42 integer -42.0 real
    -42 integer -42.0 text -42 integer -42.0 real
    -42 integer -42.0 text -42 integer -42.0 real
  }

  5 {
   INSERT INTO t4(rowid,a,b,c) VALUES(NULL, -42.4, -42.4, -42.4);
   DELETE FROM t4;
  } {
    -1 integer -42.4 text -42.4 real -42.4 real
     1 integer -42.4 text -42.4 real -42.4 real
     1 integer -42.4 text -42.4 real -42.4 real
     1 integer -42.4 text -42.4 real -42.4 real
  }

  6 {
   INSERT INTO t4 VALUES(7, 7, 7);
   UPDATE t4 SET a=8, b=8, c=8;
  } {
    -1 integer 7 text 7 integer 7.0 real
     1 integer 7 text 7 integer 7.0 real
     1 integer 7 text 7 integer 7.0 real
     1 integer 8 text 8 integer 8.0 real
     1 integer 7 text 7 integer 7.0 real
     1 integer 8 text 8 integer 8.0 real
  }

  7 {
   UPDATE t4 SET rowid=2;
  } {
     1 integer 8 text 8 integer 8.0 real
     2 integer 8 text 8 integer 8.0 real
     1 integer 8 text 8 integer 8.0 real
     2 integer 8 text 8 integer 8.0 real
  }

  8 {
   UPDATE t4 SET a='9', b='9', c='9';
  } {
     2 integer 8 text 8 integer 8.0 real
     2 integer 9 text 9 integer 9.0 real
     2 integer 8 text 8 integer 8.0 real
     2 integer 9 text 9 integer 9.0 real
  }

  9 {
   UPDATE t4 SET a='9.1', b='9.1', c='9.1';
  } {
     2 integer 9   text 9   integer 9.0 real
     2 integer 9.1 text 9.1 real    9.1 real
     2 integer 9   text 9   integer 9.0 real
     2 integer 9.1 text 9.1 real    9.1 real
  }
} {
  do_test triggerC-4.1.$n {
    eval concat [execsql "
      DELETE FROM log;
      $insert ;
      SELECT * FROM log;
    "]
  } [join $log " "]
}

#-------------------------------------------------------------------------
# This block of tests, triggerC-5.*, test that DELETE triggers are fired
# if a row is deleted as a result of OR REPLACE conflict resolution.
#
do_test triggerC-5.1.0 {
  execsql {
    DROP TABLE IF EXISTS t5;
    CREATE TABLE t5(a INTEGER PRIMARY KEY, b);
    CREATE UNIQUE INDEX t5i ON t5(b);
    INSERT INTO t5 VALUES(1, 'a');
    INSERT INTO t5 VALUES(2, 'b');
    INSERT INTO t5 VALUES(3, 'c');

    CREATE TABLE t5g(a, b, c);
    CREATE TRIGGER t5t BEFORE DELETE ON t5 BEGIN
      INSERT INTO t5g VALUES(old.a, old.b, (SELECT count(*) FROM t5));
    END;
  }
} {}
foreach {n dml t5g t5} {
  1 "DELETE FROM t5 WHERE a=2"                        {2 b 3} {1 a 3 c}
  2 "INSERT OR REPLACE INTO t5 VALUES(2, 'd')"        {2 b 3} {1 a 2 d 3 c}
  3 "UPDATE OR REPLACE t5 SET a = 2 WHERE a = 3"      {2 b 3} {1 a 2 c}
  4 "INSERT OR REPLACE INTO t5 VALUES(4, 'b')"        {2 b 3} {1 a 3 c 4 b}
  5 "UPDATE OR REPLACE t5 SET b = 'b' WHERE b = 'c'"  {2 b 3} {1 a 3 b}
  6 "INSERT OR REPLACE INTO t5 VALUES(2, 'c')"        {2 b 3 3 c 2} {1 a 2 c}
  7 "UPDATE OR REPLACE t5 SET a=1, b='b' WHERE a = 3" {1 a 3 2 b 2} {1 b}
} {
  do_test triggerC-5.1.$n {
    execsql "
      BEGIN;
        $dml ;
        SELECT * FROM t5g;
        SELECT * FROM t5;
      ROLLBACK;
    "
  } [concat $t5g $t5]
}
do_test triggerC-5.2.0 {
  execsql {
    DROP TRIGGER t5t;
    CREATE TRIGGER t5t AFTER DELETE ON t5 BEGIN
      INSERT INTO t5g VALUES(old.a, old.b, (SELECT count(*) FROM t5));
    END;
  }
} {}
foreach {n dml t5g t5} {
  1 "DELETE FROM t5 WHERE a=2"                        {2 b 2} {1 a 3 c}
  2 "INSERT OR REPLACE INTO t5 VALUES(2, 'd')"        {2 b 2} {1 a 2 d 3 c}
  3 "UPDATE OR REPLACE t5 SET a = 2 WHERE a = 3"      {2 b 2} {1 a 2 c}
  4 "INSERT OR REPLACE INTO t5 VALUES(4, 'b')"        {2 b 2} {1 a 3 c 4 b}
  5 "UPDATE OR REPLACE t5 SET b = 'b' WHERE b = 'c'"  {2 b 2} {1 a 3 b}
  6 "INSERT OR REPLACE INTO t5 VALUES(2, 'c')"        {2 b 2 3 c 1} {1 a 2 c}
  7 "UPDATE OR REPLACE t5 SET a=1, b='b' WHERE a = 3" {1 a 2 2 b 1} {1 b}
} {
  do_test triggerC-5.2.$n {
    execsql "
      BEGIN;
        $dml ;
        SELECT * FROM t5g;
        SELECT * FROM t5;
      ROLLBACK;
    "
  } [concat $t5g $t5]
}
do_test triggerC-5.3.0 {
  execsql { PRAGMA recursive_triggers = off }
} {}
foreach {n dml t5g t5} {
  1 "DELETE FROM t5 WHERE a=2"                        {2 b 2} {1 a 3 c}
  2 "INSERT OR REPLACE INTO t5 VALUES(2, 'd')"        {} {1 a 2 d 3 c}
  3 "UPDATE OR REPLACE t5 SET a = 2 WHERE a = 3"      {} {1 a 2 c}
  4 "INSERT OR REPLACE INTO t5 VALUES(4, 'b')"        {} {1 a 3 c 4 b}
  5 "UPDATE OR REPLACE t5 SET b = 'b' WHERE b = 'c'"  {} {1 a 3 b}
  6 "INSERT OR REPLACE INTO t5 VALUES(2, 'c')"        {} {1 a 2 c}
  7 "UPDATE OR REPLACE t5 SET a=1, b='b' WHERE a = 3" {} {1 b}
} {
  do_test triggerC-5.3.$n {
    execsql "
      BEGIN;
        $dml ;
        SELECT * FROM t5g;
        SELECT * FROM t5;
      ROLLBACK;
    "
  } [concat $t5g $t5]
}
do_test triggerC-5.3.8 {
  execsql { PRAGMA recursive_triggers = on }
} {}

#-------------------------------------------------------------------------
# This block of tests, triggerC-6.*, tests that "PRAGMA recursive_triggers"
# statements return the current value of the recursive triggers flag.
#
do_test triggerC-6.1 {
  execsql { PRAGMA recursive_triggers }
} {1}
do_test triggerC-6.2 {
  execsql {
    PRAGMA recursive_triggers = off;
    PRAGMA recursive_triggers;
  }
} {0}
do_test triggerC-6.3 {
  execsql {
    PRAGMA recursive_triggers = on;
    PRAGMA recursive_triggers;
  }
} {1}

#-------------------------------------------------------------------------
# Test some of the "undefined behaviour" associated with triggers. The
# undefined behaviour occurs when a row being updated or deleted is
# manipulated by a BEFORE trigger.
#
do_test triggerC-7.1 {
  execsql {
    CREATE TABLE t8(x);
    CREATE TABLE t7(a, b);
    INSERT INTO t7 VALUES(1, 2);
    INSERT INTO t7 VALUES(3, 4);
    INSERT INTO t7 VALUES(5, 6);
    CREATE TRIGGER t7t BEFORE UPDATE ON t7 BEGIN
      DELETE FROM t7 WHERE a = 1;
    END;
    CREATE TRIGGER t7ta AFTER UPDATE ON t7 BEGIN
      INSERT INTO t8 VALUES('after fired ' || old.rowid || '->' || new.rowid);
    END;
  }
} {}
do_test triggerC-7.2 {
  execsql {
    BEGIN;
      UPDATE t7 SET b=7 WHERE a = 5;
      SELECT * FROM t7;
      SELECT * FROM t8;
    ROLLBACK;
  }
} {3 4 5 7 {after fired 3->3}}
do_test triggerC-7.3 {
  execsql {
    BEGIN;
      UPDATE t7 SET b=7 WHERE a = 1;
      SELECT * FROM t7;
      SELECT * FROM t8;
    ROLLBACK;
  }
} {3 4 5 6}

do_test triggerC-7.4 {
  execsql {
    DROP TRIGGER t7t;
    CREATE TRIGGER t7t BEFORE UPDATE ON t7 WHEN (old.rowid!=1 OR new.rowid!=8)
    BEGIN
      UPDATE t7 set rowid = 8 WHERE rowid=1;
    END;
  }
} {}
do_test triggerC-7.5 {
  execsql {
    BEGIN;
      UPDATE t7 SET b=7 WHERE a = 5;
      SELECT rowid, * FROM t7;
      SELECT * FROM t8;
    ROLLBACK;
  }
} {2 3 4 3 5 7 8 1 2 {after fired 1->8} {after fired 3->3}}
do_test triggerC-7.6 {
  execsql {
    BEGIN;
      UPDATE t7 SET b=7 WHERE a = 1;
      SELECT rowid, * FROM t7;
      SELECT * FROM t8;
    ROLLBACK;
  }
} {2 3 4 3 5 6 8 1 2 {after fired 1->8}}

do_test triggerC-7.7 {
  execsql {
    DROP TRIGGER t7t;
    DROP TRIGGER t7ta;
    CREATE TRIGGER t7t BEFORE DELETE ON t7 BEGIN
      UPDATE t7 set rowid = 8 WHERE rowid=1;
    END;
    CREATE TRIGGER t7ta AFTER DELETE ON t7 BEGIN
      INSERT INTO t8 VALUES('after fired ' || old.rowid);
    END;
  }
} {}
do_test triggerC-7.8 {
  execsql {
    BEGIN;
      DELETE FROM t7 WHERE a = 3;
      SELECT rowid, * FROM t7;
      SELECT * FROM t8;
    ROLLBACK;
  }
} {3 5 6 8 1 2 {after fired 2}}
do_test triggerC-7.9 {
  execsql {
    BEGIN;
      DELETE FROM t7 WHERE a = 1;
      SELECT rowid, * FROM t7;
      SELECT * FROM t8;
    ROLLBACK;
  }
} {2 3 4 3 5 6 8 1 2}

# Ticket [e25d9ea771febc9c311928c1c01c3163dcb26643]
#
do_test triggerC-9.1 {
  execsql {
    CREATE TABLE t9(a,b);
    CREATE INDEX t9b ON t9(b);
    INSERT INTO t9 VALUES(1,0);
    INSERT INTO t9 VALUES(2,1);
    INSERT INTO t9 VALUES(3,2);
    INSERT INTO t9 SELECT a+3, a+2 FROM t9;
    INSERT INTO t9 SELECT a+6, a+5 FROM t9;
    SELECT a FROM t9 ORDER BY a;
  }
} {1 2 3 4 5 6 7 8 9 10 11 12}
do_test triggerC-9.2 {
  execsql {
    CREATE TRIGGER t9r1 AFTER DELETE ON t9 BEGIN
      DELETE FROM t9 WHERE b=old.a;
    END;
    DELETE FROM t9 WHERE b=4;
    SELECT a FROM t9 ORDER BY a;
  }
} {1 2 3 4}




finish_test