xref: /sqlite-3.40.0/test/mutex1.test (revision 7aa3ebee) 
1# 2008 June 17
2#
3# The author disclaims copyright to this source code.  In place of
4# a legal notice, here is a blessing:
5#
6#    May you do good and not evil.
7#    May you find forgiveness for yourself and forgive others.
8#    May you share freely, never taking more than you give.
9#
10#***********************************************************************
11#
12# $Id: mutex1.test,v 1.20 2009/04/23 14:58:40 danielk1977 Exp $
13
14set testdir [file dirname $argv0]
15source $testdir/tester.tcl
16
17ifcapable !mutex {
18  finish_test
19  return
20}
21if {[info exists tester_do_binarylog]} {
22  finish_test
23  return
24}
25
26sqlite3_reset_auto_extension
27clear_mutex_counters
28
29proc mutex_counters {varname} {
30  upvar $varname var
31  set var(total) 0
32  foreach {name value} [read_mutex_counters] {
33    set var($name) $value
34    incr var(total) $value
35  }
36}
37
38#-------------------------------------------------------------------------
39# Tests mutex1-1.* test that sqlite3_config() returns SQLITE_MISUSE if
40# is called at the wrong time. And that the first time sqlite3_initialize
41# is called it obtains the 'static_master' mutex 3 times and a recursive
42# mutex (sqlite3Config.pInitMutex) twice. Subsequent calls are no-ops
43# that do not require any mutexes.
44#
45do_test mutex1-1.0 {
46  install_mutex_counters 1
47} {SQLITE_MISUSE}
48
49do_test mutex1-1.1 {
50  db close
51  install_mutex_counters 1
52} {SQLITE_MISUSE}
53
54do_test mutex1-1.2 {
55  sqlite3_shutdown
56  install_mutex_counters 1
57} {SQLITE_OK}
58
59do_test mutex1-1.3 {
60  install_mutex_counters 0
61} {SQLITE_OK}
62
63do_test mutex1-1.4 {
64  install_mutex_counters 1
65} {SQLITE_OK}
66
67do_test mutex1-1.5 {
68  mutex_counters counters
69  set counters(total)
70} {0}
71
72do_test mutex1-1.6 {
73  sqlite3_initialize
74} {SQLITE_OK}
75
76do_test mutex1-1.7 {
77  mutex_counters counters
78  # list $counters(total) $counters(static_master)
79  expr {$counters(total)>0}
80} {1}
81
82do_test mutex1-1.8 {
83  clear_mutex_counters
84  sqlite3_initialize
85} {SQLITE_OK}
86
87do_test mutex1-1.9 {
88  mutex_counters counters
89  list $counters(total) $counters(static_master)
90} {0 0}
91
92#-------------------------------------------------------------------------
93# Tests mutex1-2.* test the three thread-safety related modes that
94# can be selected using sqlite3_config:
95#
96#   * Serialized mode,
97#   * Multi-threaded mode,
98#   * Single-threaded mode.
99#
100ifcapable threadsafe&&shared_cache {
101  set enable_shared_cache [sqlite3_enable_shared_cache 1]
102  foreach {mode mutexes} {
103    singlethread {}
104    multithread  {
105      fast static_app1 static_app2 static_app3
106      static_lru static_master static_mem static_open
107      static_prng static_pmem static_vfs1 static_vfs2
108      static_vfs3
109    }
110    serialized  {
111      fast recursive static_app1 static_app2
112      static_app3 static_lru static_master static_mem
113      static_open static_prng static_pmem static_vfs1
114      static_vfs2 static_vfs3
115    }
116  } {
117
118    do_test mutex1.2.$mode.1 {
119      catch {db close}
120      sqlite3_shutdown
121      sqlite3_config $mode
122    } SQLITE_OK
123
124    do_test mutex1.2.$mode.2 {
125      sqlite3_initialize
126      clear_mutex_counters
127      sqlite3 db test.db -nomutex 0 -fullmutex 0
128      catchsql { CREATE TABLE abc(a, b, c) }
129      db eval {
130        INSERT INTO abc VALUES(1, 2, 3);
131      }
132    } {}
133    ifcapable !memorymanage {
134      regsub { static_lru} $mutexes {} mutexes
135    }
136    if {$mode ne "singlethread"} {
137      do_test mutex1.2.$mode.3 {
138        #
139        # NOTE: Make sure all the app and vfs mutexes get used.
140        #
141        enter_static_mutex static_app1
142        leave_static_mutex static_app1
143        enter_static_mutex static_app2
144        leave_static_mutex static_app2
145        enter_static_mutex static_app3
146        leave_static_mutex static_app3
147        enter_static_mutex static_vfs1
148        leave_static_mutex static_vfs1
149        enter_static_mutex static_vfs2
150        leave_static_mutex static_vfs2
151        enter_static_mutex static_vfs3
152        leave_static_mutex static_vfs3
153      } {}
154    }
155    do_test mutex1.2.$mode.4 {
156      mutex_counters counters
157
158      set res [list]
159      foreach {key value} [array get counters] {
160        if {$key ne "total" && $value > 0} {
161          lappend res $key
162        }
163      }
164      lsort $res
165    } [lsort $mutexes]
166  }
167  sqlite3_enable_shared_cache $enable_shared_cache
168
169  # Open and use a connection in "nomutex" mode. Test that no recursive
170  # mutexes are obtained.
171  do_test mutex1.3.1 {
172    catch {db close}
173    clear_mutex_counters
174    sqlite3 db test.db -nomutex 1
175    execsql { SELECT * FROM abc }
176  } {1 2 3 1 2 3 1 2 3}
177  do_test mutex1.3.2 {
178    mutex_counters counters
179    set counters(recursive)
180  } {0}
181}
182
183# Test the sqlite3_db_mutex() function.
184#
185do_test mutex1.4.1 {
186  catch {db close}
187  sqlite3 db test.db
188  enter_db_mutex db
189  db eval {SELECT 1, 2, 3}
190} {1 2 3}
191do_test mutex1.4.2 {
192  leave_db_mutex db
193  db eval {SELECT 1, 2, 3}
194} {1 2 3}
195do_test mutex1.4.3 {
196  catch {db close}
197  sqlite3 db test.db -nomutex 1
198  enter_db_mutex db
199  db eval {SELECT 1, 2, 3}
200} {1 2 3}
201do_test mutex1.4.4 {
202  leave_db_mutex db
203  db eval {SELECT 1, 2, 3}
204} {1 2 3}
205
206do_test mutex1-X {
207  catch {db close}
208  sqlite3_shutdown
209  clear_mutex_counters
210  install_mutex_counters 0
211  sqlite3_initialize
212} {SQLITE_OK}
213
214autoinstall_test_functions
215finish_test
216