xref: /sqlite-3.40.0/test/index6.test (revision 38cefc83)

# 2013-07-31
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# Test cases for partial indices
#


set testdir [file dirname $argv0]
source $testdir/tester.tcl

ifcapable !vtab {
  finish_test
  return
}

load_static_extension db wholenumber;
do_test index6-1.1 {
  # Able to parse and manage partial indices
  execsql {
    CREATE TABLE t1(a,b,c);
    CREATE INDEX t1a ON t1(a) WHERE a IS NOT NULL;
    CREATE INDEX t1b ON t1(b) WHERE b>10;
    CREATE VIRTUAL TABLE nums USING wholenumber;
    INSERT INTO t1(a,b,c)
       SELECT CASE WHEN value%3!=0 THEN value END, value, value
         FROM nums WHERE value<=20;
    SELECT count(a), count(b) FROM t1;
    PRAGMA integrity_check;
  }
} {14 20 ok}

# Make sure the count(*) optimization works correctly with
# partial indices.  Ticket [a5c8ed66cae16243be6] 2013-10-03.
#
do_execsql_test index6-1.1.1 {
  SELECT count(*) FROM t1;
} {20}

# Error conditions during parsing...
#
do_test index6-1.2 {
  catchsql {
    CREATE INDEX bad1 ON t1(a,b) WHERE x IS NOT NULL;
  }
} {1 {no such column: x}}
do_test index6-1.3 {
  catchsql {
    CREATE INDEX bad1 ON t1(a,b) WHERE EXISTS(SELECT * FROM t1);
  }
} {1 {subqueries prohibited in partial index WHERE clauses}}
do_test index6-1.4 {
  catchsql {
    CREATE INDEX bad1 ON t1(a,b) WHERE a!=?1;
  }
} {1 {parameters prohibited in partial index WHERE clauses}}
do_test index6-1.5 {
  catchsql {
    CREATE INDEX bad1 ON t1(a,b) WHERE a!=random();
  }
} {1 {non-deterministic functions prohibited in partial index WHERE clauses}}
do_test index6-1.6 {
  catchsql {
    CREATE INDEX bad1 ON t1(a,b) WHERE a NOT LIKE 'abc%';
  }
} {0 {}}
do_execsql_test index6-1.7 {
  DROP INDEX IF EXISTS bad1;
}

do_test index6-1.10 {
  execsql {
    ANALYZE;
    SELECT idx, stat FROM sqlite_stat1 ORDER BY idx;
    PRAGMA integrity_check;
  }
} {{} 20 t1a {14 1} t1b {10 1} ok}

# STAT1 shows the partial indices have a reduced number of
# rows.
#
do_test index6-1.11 {
  execsql {
    UPDATE t1 SET a=b;
    ANALYZE;
    SELECT idx, stat FROM sqlite_stat1 ORDER BY idx;
    PRAGMA integrity_check;
  }
} {{} 20 t1a {20 1} t1b {10 1} ok}

do_test index6-1.11 {
  execsql {
    UPDATE t1 SET a=NULL WHERE b%3!=0;
    UPDATE t1 SET b=b+100;
    ANALYZE;
    SELECT idx, stat FROM sqlite_stat1 ORDER BY idx;
    PRAGMA integrity_check;
  }
} {{} 20 t1a {6 1} t1b {20 1} ok}

do_test index6-1.12 {
  execsql {
    UPDATE t1 SET a=CASE WHEN b%3!=0 THEN b END;
    UPDATE t1 SET b=b-100;
    ANALYZE;
    SELECT idx, stat FROM sqlite_stat1 ORDER BY idx;
    PRAGMA integrity_check;
  }
} {{} 20 t1a {13 1} t1b {10 1} ok}

do_test index6-1.13 {
  execsql {
    DELETE FROM t1 WHERE b BETWEEN 8 AND 12;
    ANALYZE;
    SELECT idx, stat FROM sqlite_stat1 ORDER BY idx;
    PRAGMA integrity_check;
  }
} {{} 15 t1a {10 1} t1b {8 1} ok}

do_test index6-1.14 {
  execsql {
    REINDEX;
    ANALYZE;
    SELECT idx, stat FROM sqlite_stat1 ORDER BY idx;
    PRAGMA integrity_check;
  }
} {{} 15 t1a {10 1} t1b {8 1} ok}

do_test index6-1.15 {
  execsql {
    CREATE INDEX t1c ON t1(c);
    ANALYZE;
    SELECT idx, stat FROM sqlite_stat1 ORDER BY idx;
    PRAGMA integrity_check;
  }
} {t1a {10 1} t1b {8 1} t1c {15 1} ok}

# Queries use partial indices as appropriate times.
#
do_test index6-2.1 {
  execsql {
    CREATE TABLE t2(a,b);
    INSERT INTO t2(a,b) SELECT value, value FROM nums WHERE value<1000;
    UPDATE t2 SET a=NULL WHERE b%2==0;
    CREATE INDEX t2a1 ON t2(a) WHERE a IS NOT NULL;
    SELECT count(*) FROM t2 WHERE a IS NOT NULL;
  }
} {500}
do_test index6-2.2 {
  execsql {
    EXPLAIN QUERY PLAN
    SELECT * FROM t2 WHERE a=5;
  }
} {/.* TABLE t2 USING INDEX t2a1 .*/}
ifcapable stat4 {
  execsql ANALYZE
  do_test index6-2.3stat4 {
    execsql {
      EXPLAIN QUERY PLAN
      SELECT * FROM t2 WHERE a IS NOT NULL;
    }
  } {/.* TABLE t2 USING INDEX t2a1 .*/}
} else {
  do_test index6-2.3stat4 {
    execsql {
      EXPLAIN QUERY PLAN
      SELECT * FROM t2 WHERE a IS NOT NULL AND a>0;
    }
  } {/.* TABLE t2 USING INDEX t2a1 .*/}
}
do_test index6-2.4 {
  execsql {
    EXPLAIN QUERY PLAN
    SELECT * FROM t2 WHERE a IS NULL;
  }
} {~/.*INDEX t2a1.*/}

do_execsql_test index6-2.101 {
  DROP INDEX t2a1;
  UPDATE t2 SET a=b, b=b+10000;
  SELECT b FROM t2 WHERE a=15;
} {10015}
do_execsql_test index6-2.102 {
  CREATE INDEX t2a2 ON t2(a) WHERE a<100 OR a>200;
  SELECT b FROM t2 WHERE a=15;
  PRAGMA integrity_check;
} {10015 ok}
do_execsql_test index6-2.102eqp {
  EXPLAIN QUERY PLAN
  SELECT b FROM t2 WHERE a=15;
} {~/.*INDEX t2a2.*/}
do_execsql_test index6-2.103 {
  SELECT b FROM t2 WHERE a=15 AND a<100;
} {10015}
do_execsql_test index6-2.103eqp {
  EXPLAIN QUERY PLAN
  SELECT b FROM t2 WHERE a=15 AND a<100;
} {/.*INDEX t2a2.*/}
do_execsql_test index6-2.104 {
  SELECT b FROM t2 WHERE a=515 AND a>200;
} {10515}
do_execsql_test index6-2.104eqp {
  EXPLAIN QUERY PLAN
  SELECT b FROM t2 WHERE a=515 AND a>200;
} {/.*INDEX t2a2.*/}

# Partial UNIQUE indices
#
do_execsql_test index6-3.1 {
  CREATE TABLE t3(a,b);
  INSERT INTO t3 SELECT value, value FROM nums WHERE value<200;
  UPDATE t3 SET a=999 WHERE b%5!=0;
  CREATE UNIQUE INDEX t3a ON t3(a) WHERE a<>999;
} {}
do_test index6-3.2 {
  # unable to insert a duplicate row a-value that is not 999.
  catchsql {
    INSERT INTO t3(a,b) VALUES(150, 'test1');
  }
} {1 {UNIQUE constraint failed: t3.a}}
do_test index6-3.3 {
  # can insert multiple rows with a==999 because such rows are not
  # part of the unique index.
  catchsql {
    INSERT INTO t3(a,b) VALUES(999, 'test1'), (999, 'test2');
  }
} {0 {}}
do_execsql_test index6-3.4 {
  SELECT count(*) FROM t3 WHERE a=999;
} {162}
integrity_check index6-3.5

do_execsql_test index6-4.0 {
  VACUUM;
  PRAGMA integrity_check;
} {ok}

# Silently ignore database name qualifiers in partial indices.
#
do_execsql_test index6-5.0 {
  CREATE INDEX t3b ON t3(b) WHERE xyzzy.t3.b BETWEEN 5 AND 10;
                               /* ^^^^^-- ignored */
  ANALYZE;
  SELECT count(*) FROM t3 WHERE t3.b BETWEEN 5 AND 10;
  SELECT stat+0 FROM sqlite_stat1 WHERE idx='t3b';
} {6 6}

# Test case for ticket [2ea3e9fe6379fc3f6ce7e090ce483c1a3a80d6c9] from
# 2014-04-13: Partial index causes assertion fault on UPDATE OR REPLACE.
#
do_execsql_test index6-6.0 {
  CREATE TABLE t6(a,b);
  CREATE UNIQUE INDEX t6ab ON t1(a,b);
  CREATE INDEX t6b ON t6(b) WHERE b=1;
  INSERT INTO t6(a,b) VALUES(123,456);
  SELECT * FROM t6;
} {123 456}
do_execsql_test index6-6.1 {
  UPDATE OR REPLACE t6 SET b=789;
  SELECT * FROM t6;
} {123 789}
do_execsql_test index6-6.2 {
  PRAGMA integrity_check;
} {ok}

# Test case for ticket [2326c258d02ead33d69faa63de8f4686b9b1b9d9] on
# 2015-02-24.  Any use of a partial index qualifying constraint inside
# the ON clause of a LEFT JOIN was causing incorrect results for all
# versions of SQLite 3.8.0 through 3.8.8.
#
do_execsql_test index6-7.0 {
  CREATE TABLE t7a(x);
  CREATE TABLE t7b(y);
  INSERT INTO t7a(x) VALUES(1);
  CREATE INDEX t7ax ON t7a(x) WHERE x=99;
  PRAGMA automatic_index=OFF;
  SELECT * FROM t7a LEFT JOIN t7b ON (x=99) ORDER BY x;
} {1 {}}
do_execsql_test index6-7.1 {
  INSERT INTO t7b(y) VALUES(2);
  SELECT * FROM t7a JOIN t7b ON (x=99) ORDER BY x;
} {}
do_execsql_test index6-7.2 {
  INSERT INTO t7a(x) VALUES(99);
  SELECT * FROM t7a LEFT JOIN t7b ON (x=99) ORDER BY x;
} {1 {} 99 2}
do_execsql_test index6-7.3 {
  SELECT * FROM t7a JOIN t7b ON (x=99) ORDER BY x;
} {99 2}
do_execsql_test index6-7.4 {
  EXPLAIN QUERY PLAN
  SELECT * FROM t7a JOIN t7b ON (x=99) ORDER BY x;
} {/USING COVERING INDEX t7ax/}


do_execsql_test index6-8.0 {
  CREATE TABLE t8a(a,b);
  CREATE TABLE t8b(x,y);
  CREATE INDEX i8c ON t8b(y) WHERE x = 'value';

  INSERT INTO t8a VALUES(1, 'one');
  INSERT INTO t8a VALUES(2, 'two');
  INSERT INTO t8a VALUES(3, 'three');

  INSERT INTO t8b VALUES('value', 1);
  INSERT INTO t8b VALUES('dummy', 2);
  INSERT INTO t8b VALUES('value', 3);
  INSERT INTO t8b VALUES('dummy', 4);
} {}

do_eqp_test index6-8.1 {
  SELECT * FROM t8a LEFT JOIN t8b ON (x = 'value' AND y = a)
} {
  QUERY PLAN
  |--SCAN TABLE t8a
  `--SEARCH TABLE t8b USING INDEX i8c (y=?)
}

do_execsql_test index6-8.2 {
  SELECT * FROM t8a LEFT JOIN t8b ON (x = 'value' AND y = a)
} {
  1 one value 1
  2 two {} {}
  3 three value 3
}

# 2015-06-11.  Assertion fault found by AFL
#
do_execsql_test index6-9.1 {
  CREATE TABLE t9(a int, b int, c int);
  CREATE INDEX t9ca ON t9(c,a) WHERE a in (10,12,20);
  INSERT INTO t9 VALUES(1,1,9),(10,2,35),(11,15,82),(20,19,5),(NULL,7,3);
  UPDATE t9 SET b=c WHERE a in (10,12,20);
  SELECT a,b,c,'|' FROM t9 ORDER BY a;
} {{} 7 3 | 1 1 9 | 10 35 35 | 11 15 82 | 20 5 5 |}
do_execsql_test index6-9.2 {
  DROP TABLE t9;
  CREATE TABLE t9(a int, b int, c int, PRIMARY KEY(a)) WITHOUT ROWID;
  CREATE INDEX t9ca ON t9(c,a) WHERE a in (10,12,20);
  INSERT INTO t9 VALUES(1,1,9),(10,2,35),(11,15,82),(20,19,5);
  UPDATE t9 SET b=c WHERE a in (10,12,20);
  SELECT a,b,c,'|' FROM t9 ORDER BY a;
} {1 1 9 | 10 35 35 | 11 15 82 | 20 5 5 |}

# AND-connected terms in the WHERE clause of a partial index
#
do_execsql_test index6-10.1 {
  CREATE TABLE t10(a,b,c,d,e INTEGER PRIMARY KEY);
  INSERT INTO t10 VALUES
    (1,2,3,4,5),
    (2,3,4,5,6),
    (3,4,5,6,7),
    (1,2,3,8,9);
  CREATE INDEX t10x ON t10(d) WHERE a=1 AND b=2 AND c=3;
  SELECT e FROM t10 WHERE a=1 AND b=2 AND c=3 ORDER BY d;
} {5 9}
do_execsql_test index6-10.1eqp {
  EXPLAIN QUERY PLAN
  SELECT e FROM t10 WHERE a=1 AND b=2 AND c=3 ORDER BY d;
} {/USING INDEX t10x/}
do_execsql_test index6-10.2 {
  SELECT e FROM t10 WHERE c=3 AND 2=b AND a=1 ORDER BY d DESC;
} {9 5}
do_execsql_test index6-10.2eqp {
  EXPLAIN QUERY PLAN
  SELECT e FROM t10 WHERE c=3 AND 2=b AND a=1 ORDER BY d DESC;
} {/USING INDEX t10x/}
do_execsql_test index6-10.3 {
  SELECT e FROM t10 WHERE a=1 AND b=2 ORDER BY d DESC;
} {9 5}
do_execsql_test index6-10.3eqp {
  EXPLAIN QUERY PLAN
  SELECT e FROM t10 WHERE a=1 AND b=2 ORDER BY d DESC;
} {~/USING INDEX t10x/}

# A partial index will be used for a full table scan, where possible
do_execsql_test index6-11.1 {
  CREATE TABLE t11(a,b,c);
  CREATE INDEX t11x ON t11(a) WHERE b<>99;
  EXPLAIN QUERY PLAN SELECT a FROM t11 WHERE b<>99;
} {/USING INDEX t11x/}
do_execsql_test index6-11.2 {
  EXPLAIN QUERY PLAN SELECT a FROM t11 WHERE b<>99 AND c<>98;
} {/USING INDEX t11x/}

# 2018-12-08
# Ticket https://www.sqlite.org/src/info/1d958d90596593a7
# NOT IN operator fails when using a partial index.
#
do_execsql_test index6-12.1 {
  DROP TABLE IF EXISTS t1;
  DROP TABLE IF EXISTS t2;
  CREATE TABLE t1(a,b);
  INSERT INTO t1 VALUES(1,1);
  INSERT INTO t1 VALUES(2,2);
  CREATE TABLE t2(x);
  INSERT INTO t2 VALUES(1);
  INSERT INTO t2 VALUES(2);
  SELECT 'one', * FROM t2 WHERE x NOT IN (SELECT a FROM t1);
  CREATE INDEX t1a ON t1(a) WHERE b=1;
  SELECT 'two', * FROM t2 WHERE x NOT IN (SELECT a FROM t1);
} {}
do_execsql_test index6-12.2 {
  SELECT x FROM t2 WHERE x IN (SELECT a FROM t1) ORDER BY +x;
} {1 2}

# 2019-05-04
# Ticket https://www.sqlite.org/src/tktview/5c6955204c392ae763a95
# Theorem prover error
#
do_execsql_test index6-13.1 {
  DROP TABLE IF EXISTS t0;
  CREATE TABLE t0(c0);
  CREATE INDEX index_0 ON t0(c0) WHERE c0 NOT NULL;
  INSERT INTO t0(c0) VALUES (NULL);
  SELECT * FROM t0 WHERE c0 OR 1;
} {{}}

# 2019-05-11
# Ticket https://sqlite.org/src/tktview/8025674847
reset_db
do_execsql_test index6-14.1 {
  CREATE TABLE IF NOT EXISTS t0 (c0, c1);
  CREATE INDEX IF NOT EXISTS i0 ON t0(c0, c1) WHERE c0 NOT NULL;
  INSERT INTO t0(c0, c1) VALUES(NULL, 'row');
  SELECT * FROM t0 WHERE t0.c0 IS NOT 1;
} {{} row}

do_execsql_test index6-14.2 {
  SELECT * FROM t0 WHERE CASE c0 WHEN 0 THEN 0 ELSE 1 END;
} {{} row}

# 2019-08-30
# Ticket https://www.sqlite.org/src/info/a6408d42b9f44462
#
do_execsql_test index6-15.1 {
  DROP TABLE t0;
  CREATE TABLE t0(c0);
  INSERT INTO t0(c0) VALUES (NULL);
  CREATE INDEX i0 ON t0(1) WHERE c0 NOT NULL;
  SELECT 1 FROM t0 WHERE (t0.c0 IS FALSE) IS FALSE;
} {1}

finish_test