xref: /sqlite-3.40.0/test/fts3auto.test (revision 653265d9)

# 2011 June 10
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# If this build does not include FTS3, skip the tests in this file.
#
ifcapable !fts3 { finish_test ; return }
source $testdir/fts3_common.tcl
source $testdir/malloc_common.tcl

set testprefix fts3auto
set sfep $sqlite_fts3_enable_parentheses
set sqlite_fts3_enable_parentheses 1

#--------------------------------------------------------------------------
# Start of Tcl infrastructure used by tests. The entry point is
# [do_fts3query_test] (described below).
#

#    do_fts3query_test TESTNAME ?OPTIONS? TABLE MATCHEXPR
#
# This proc runs several test cases on FTS3/4 table $TABLE using match
# expression $MATCHEXPR. All documents in $TABLE must be formatted so that
# they can be "tokenized" using the Tcl list commands (llength, lindex etc.).
# The name and column names used by $TABLE must not require any quoting or
# escaping when used in SQL statements.
#
# $MATCHINFO may be any expression accepted by the FTS4 MATCH operator,
# except that the "<column-name>:token" syntax is not supported. Tcl list
# commands are used to tokenize the expression. Any parenthesis must appear
# either as separate list elements, or as the first (for opening) or last
# (for closing) character of a list element. i.e. the expression "(a OR b)c"
# will not be parsed correctly, but "( a OR b) c" will.
#
set sqlite_fts3_enable_parentheses 1
proc do_fts3query_test {tn tbl expr} {

  get_near_results $tbl $expr aMatchinfo
  set match $expr

  set matchinfo_asc [list]
  foreach docid [lsort -integer -incr [array names aMatchinfo]] {
    lappend matchinfo_asc $docid $aMatchinfo($docid)
  }
  set matchinfo_desc [list]
  foreach docid [lsort -integer -decr [array names aMatchinfo]] {
    lappend matchinfo_desc $docid $aMatchinfo($docid)
  }

  set title "(\"$match\" -> [llength [array names aMatchinfo]] rows)"

  do_execsql_test $tn$title.1 "
    SELECT docid FROM $tbl WHERE $tbl MATCH '$match' ORDER BY docid ASC
  " [lsort -integer -incr [array names aMatchinfo]]

  do_execsql_test $tn$title.2 "
    SELECT docid FROM $tbl WHERE $tbl MATCH '$match' ORDER BY docid DESC
  " [lsort -integer -decr [array names aMatchinfo]]

  do_execsql_test $tn$title.3 "
    SELECT docid, mit(matchinfo($tbl, 'x')) FROM $tbl
    WHERE $tbl MATCH '$match' ORDER BY docid DESC
  " $matchinfo_desc

  do_execsql_test $tn$title.4 "
    SELECT docid, mit(matchinfo($tbl, 'x')) FROM $tbl
    WHERE $tbl MATCH '$match' ORDER BY docid ASC
  " $matchinfo_asc
}


proc mit {blob} {
  set scan(littleEndian) i*
  set scan(bigEndian) I*
  binary scan $blob $scan($::tcl_platform(byteOrder)) r
  return $r
}
db func mit mit

proc fix_near_expr {expr} {
  set out [list]
  lappend out [lindex $expr 0]
  foreach {a b} [lrange $expr 1 end] {
    if {[string match -nocase near $a]}   { set a 10 }
    if {[string match -nocase near/* $a]} { set a [string range $a 5 end] }
    lappend out $a
    lappend out $b
  }
  return $out
}

proc get_single_near_results {tbl expr arrayvar nullvar} {
  upvar $arrayvar aMatchinfo
  upvar $nullvar nullentry
  catch {array unset aMatchinfo}

  set expr [fix_near_expr $expr]

  # Calculate the expected results using [fts3_near_match]. The following
  # loop populates the "hits" and "counts" arrays as follows:
  #
  #   1. For each document in the table that matches the NEAR expression,
  #      hits($docid) is set to 1. The set of docids that match the expression
  #      can therefore be found using [array names hits].
  #
  #   2. For each column of each document in the table, counts($docid,$iCol)
  #      is set to the -phrasecountvar output.
  #
  set res [list]
  catch { array unset hits }
  db eval "SELECT docid, * FROM $tbl" d {
    set iCol 0
    foreach col [lrange $d(*) 1 end] {
      set docid $d(docid)
      set hit [fts3_near_match $d($col) $expr -p counts($docid,$iCol)]
      if {$hit} { set hits($docid) 1 }
      incr iCol
    }
  }
  set nPhrase [expr ([llength $expr]+1)/2]
  set nCol $iCol

  # This block populates the nHit and nDoc arrays. For each phrase/column
  # in the query/table, array elements are set as follows:
  #
  #   nHit($iPhrase,$iCol) - Total number of hits for phrase $iPhrase in
  #                          column $iCol.
  #
  #   nDoc($iPhrase,$iCol) - Number of documents with at least one hit for
  #                          phrase $iPhrase in column $iCol.
  #
  for {set iPhrase 0} {$iPhrase < $nPhrase} {incr iPhrase} {
    for {set iCol 0} {$iCol < $nCol} {incr iCol} {
      set nHit($iPhrase,$iCol) 0
      set nDoc($iPhrase,$iCol) 0
    }
  }
  foreach key [array names counts] {
    set iCol [lindex [split $key ,] 1]
    set iPhrase 0
    foreach c $counts($key) {
      if {$c>0} { incr nDoc($iPhrase,$iCol) 1 }
      incr nHit($iPhrase,$iCol) $c
      incr iPhrase
    }
  }

  if {[info exists ::fts3_deferred] && [llength $expr]==1} {
    set phrase [lindex $expr 0]
    set rewritten [list]
    set partial 0
    foreach tok $phrase {
      if {[lsearch $::fts3_deferred $tok]>=0} {
        lappend rewritten *
      } else {
        lappend rewritten $tok
        set partial 1
      }
    }
    if {$partial==0} {
      set tblsize [db one "SELECT count(*) FROM $tbl"]
      for {set iCol 0} {$iCol < $nCol} {incr iCol} {
        set nHit(0,$iCol) $tblsize
        set nDoc(0,$iCol) $tblsize
      }
    } elseif {$rewritten != $phrase} {
      while {[lindex $rewritten end] == "*"} {
        set rewritten [lrange $rewritten 0 end-1]
      }
      while {[lindex $rewritten 0] == "*"} {
        set rewritten [lrange $rewritten 1 end]
      }
      get_single_near_results $tbl [list $rewritten] aRewrite nullentry
      foreach docid [array names hits] {
        set aMatchinfo($docid) $aRewrite($docid)
      }
      return
    }
  }

  # Set up the aMatchinfo array. For each document, set aMatchinfo($docid) to
  # contain the output of matchinfo('x') for the document.
  #
  foreach docid [array names hits] {
    set mi [list]
    for {set iPhrase 0} {$iPhrase<$nPhrase} {incr iPhrase} {
      for {set iCol 0} {$iCol<$nCol} {incr iCol} {
        lappend mi [lindex $counts($docid,$iCol) $iPhrase]
        lappend mi $nHit($iPhrase,$iCol)
        lappend mi $nDoc($iPhrase,$iCol)
      }
    }
    set aMatchinfo($docid) $mi
  }

  # Set up the nullentry output.
  #
  set nullentry [list]
  for {set iPhrase 0} {$iPhrase<$nPhrase} {incr iPhrase} {
    for {set iCol 0} {$iCol<$nCol} {incr iCol} {
      lappend nullentry 0 $nHit($iPhrase,$iCol) $nDoc($iPhrase,$iCol)
    }
  }
}


proc matching_brackets {expr} {
  if {[string range $expr 0 0]!="(" || [string range $expr end end] !=")"} {
    return 0
  }

  set iBracket 1
  set nExpr [string length $expr]
  for {set i 1} {$iBracket && $i < $nExpr} {incr i} {
    set c [string range $expr $i $i]
    if {$c == "("} {incr iBracket}
    if {$c == ")"} {incr iBracket -1}
  }

  return [expr ($iBracket==0 && $i==$nExpr)]
}

proc get_near_results {tbl expr arrayvar {nullvar ""}} {
  upvar $arrayvar aMatchinfo
  if {$nullvar != ""} { upvar $nullvar nullentry }

  set expr [string trim $expr]
  while { [matching_brackets $expr] } {
    set expr [string trim [string range $expr 1 end-1]]
  }

  set prec(NOT) 1
  set prec(AND) 2
  set prec(OR)  3

  set currentprec 0
  set iBracket 0
  set expr_length [llength $expr]
  for {set i 0} {$i < $expr_length} {incr i} {
    set op [lindex $expr $i]
    if {$iBracket==0 && [info exists prec($op)] && $prec($op)>=$currentprec } {
      set opidx $i
      set currentprec $prec($op)
    } else {
      for {set j 0} {$j < [string length $op]} {incr j} {
        set c [string range $op $j $j]
        if {$c == "("} { incr iBracket +1 }
        if {$c == ")"} { incr iBracket -1 }
      }
    }
  }
  if {$iBracket!=0} { error "mismatched brackets in: $expr" }

  if {[info exists opidx]==0} {
    get_single_near_results $tbl $expr aMatchinfo nullentry
  } else {
    set eLeft  [lrange $expr 0 [expr $opidx-1]]
    set eRight [lrange $expr [expr $opidx+1] end]

    get_near_results $tbl $eLeft  aLeft  nullleft
    get_near_results $tbl $eRight aRight nullright

    switch -- [lindex $expr $opidx] {
      "NOT" {
        foreach hit [array names aLeft] {
          if {0==[info exists aRight($hit)]} {
            set aMatchinfo($hit) $aLeft($hit)
          }
        }
        set nullentry $nullleft
      }

      "AND" {
        foreach hit [array names aLeft] {
          if {[info exists aRight($hit)]} {
            set aMatchinfo($hit) [concat $aLeft($hit) $aRight($hit)]
          }
        }
        set nullentry [concat $nullleft $nullright]
      }

      "OR" {
        foreach hit [array names aLeft] {
          if {[info exists aRight($hit)]} {
            set aMatchinfo($hit) [concat $aLeft($hit) $aRight($hit)]
            unset aRight($hit)
          } else {
            set aMatchinfo($hit) [concat $aLeft($hit) $nullright]
          }
        }
        foreach hit [array names aRight] {
          set aMatchinfo($hit) [concat $nullleft $aRight($hit)]
        }

        set nullentry [concat $nullleft $nullright]
      }
    }
  }
}


# End of test procs. Actual tests are below this line.
#--------------------------------------------------------------------------

#--------------------------------------------------------------------------
# The following test cases - fts3auto-1.* - focus on testing the Tcl
# command [fts3_near_match], which is used by other tests in this file.
#
proc test_fts3_near_match {tn doc expr res} {
  fts3_near_match $doc $expr -phrasecountvar p
  uplevel do_test [list $tn] [list [list set {} $p]] [list $res]
}

test_fts3_near_match 1.1.1 {a b c a b} a                   {2}
test_fts3_near_match 1.1.2 {a b c a b} {a 5 b 6 c}         {2 2 1}
test_fts3_near_match 1.1.3 {a b c a b} {"a b"}             {2}
test_fts3_near_match 1.1.4 {a b c a b} {"b c"}             {1}
test_fts3_near_match 1.1.5 {a b c a b} {"c c"}             {0}

test_fts3_near_match 1.2.1 "a b c d e f g" {b 2 f}         {0 0}
test_fts3_near_match 1.2.2 "a b c d e f g" {b 3 f}         {1 1}
test_fts3_near_match 1.2.3 "a b c d e f g" {f 2 b}         {0 0}
test_fts3_near_match 1.2.4 "a b c d e f g" {f 3 b}         {1 1}
test_fts3_near_match 1.2.5 "a b c d e f g" {"a b" 2 "f g"} {0 0}
test_fts3_near_match 1.2.6 "a b c d e f g" {"a b" 3 "f g"} {1 1}

set A "a b c d e f g h i j k l m n o p q r s t u v w x y z"
test_fts3_near_match 1.3.1 $A {"c d" 5 "i j" 1 "e f"}      {0 0 0}
test_fts3_near_match 1.3.2 $A {"c d" 5 "i j" 2 "e f"}      {1 1 1}

#--------------------------------------------------------------------------
# Test cases fts3auto-2.* run some simple tests using the
# [do_fts3query_test] proc.
#
foreach {tn create} {
  1    "fts4(a, b)"
  2    "fts4(a, b, order=DESC)"
  3    "fts4(a, b, order=ASC)"
  4    "fts4(a, b, prefix=1)"
  5    "fts4(a, b, order=DESC, prefix=1)"
  6    "fts4(a, b, order=ASC, prefix=1)"
} {
  do_test 2.$tn.1 {
    catchsql { DROP TABLE t1 }
    execsql  "CREATE VIRTUAL TABLE t1 USING $create"
    for {set i 0} {$i<32} {incr i} {
      set doc [list]
      if {$i&0x01} {lappend doc one}
      if {$i&0x02} {lappend doc two}
      if {$i&0x04} {lappend doc three}
      if {$i&0x08} {lappend doc four}
      if {$i&0x10} {lappend doc five}
      execsql { INSERT INTO t1 VALUES($doc, null) }
    }
  } {}

  foreach {tn2 expr} {
    1     {one}
    2     {one NEAR/1 five}
    3     {t*}
    4     {t* NEAR/0 five}
    5     {o* NEAR/1 f*}
    6     {one NEAR five NEAR two NEAR four NEAR three}
    7     {one NEAR xyz}
    8     {one OR two}
    9     {one AND two}
    10    {one NOT two}
    11    {one AND two OR three}
    12    {three OR one AND two}
    13    {(three OR one) AND two}
    14    {(three OR one) AND two NOT (five NOT four)}
    15    {"one two"}
    16    {"one two" NOT "three four"}
  } {
    do_fts3query_test 2.$tn.2.$tn2 t1 $expr
  }
}

#--------------------------------------------------------------------------
# Some test cases involving deferred tokens.
#
proc make_token_deferrable {tbl token} {
  set nRow [db one "SELECT count(*) FROM $tbl"]
  set pgsz [db one "PRAGMA page_size"]

  execsql "INSERT INTO $tbl ($tbl) VALUES('maxpending=100000000')"
  execsql BEGIN
  for {set i 0} {$i < ($nRow * $pgsz * 1.2)/100} {incr i} {
    set doc [string repeat "$token " 100]
    execsql "INSERT INTO $tbl VALUES(\$doc)"
  }
  execsql "INSERT INTO $tbl VALUES('aaaaaaa ${token}aaaaa')"
  execsql COMMIT
}

foreach {tn create} {
  1    "fts4(x)"
  2    "fts4(x, order=DESC)"
} {
  catchsql { DROP TABLE t1 }
  execsql  "CREATE VIRTUAL TABLE t1 USING $create"
  do_execsql_test 3.$tn.1 {
    INSERT INTO t1(docid, x) VALUES(-2, 'a b c d e f g h i j k');
    INSERT INTO t1(docid, x) VALUES(-1, 'b c d e f g h i j k a');
    INSERT INTO t1(docid, x) VALUES(0, 'c d e f g h i j k a b');
    INSERT INTO t1(docid, x) VALUES(1, 'd e f g h i j k a b c');
    INSERT INTO t1(docid, x) VALUES(2, 'e f g h i j k a b c d');
    INSERT INTO t1(docid, x) VALUES(3, 'f g h i j k a b c d e');
    INSERT INTO t1(docid, x) VALUES(4, 'a c e g i k');
    INSERT INTO t1(docid, x) VALUES(5, 'a d g j');
    INSERT INTO t1(docid, x) VALUES(6, 'c a b');
  }

  make_token_deferrable t1 c

  set ::fts3_deferred [list]
  foreach {tn2 expr} {
    1     {a OR c}
  } {
    do_fts3query_test 3.$tn.2.$tn2 t1 $expr
  }

  set ::fts3_deferred [list c]
  execsql {
    UPDATE t1_segments
    SET block = zeroblob(length(block))
    WHERE length(block)>10000 AND 0
  }
  foreach {tn2 expr} {
    1     {a NEAR c}
    2     {a AND c}
    3     {"a c"}
    4     {"c a"}
    5     {"a c" NEAR/1 g}
    6     {"a c" NEAR/0 g}
  } {
    do_fts3query_test 3.$tn.2.$tn2 t1 $expr
  }
}

set sqlite_fts3_enable_parentheses $sfep
finish_test