1 /* 2 ** 2001 September 15 3 ** 4 ** The author disclaims copyright to this source code. In place of 5 ** a legal notice, here is a blessing: 6 ** 7 ** May you do good and not evil. 8 ** May you find forgiveness for yourself and forgive others. 9 ** May you share freely, never taking more than you give. 10 ** 11 ************************************************************************* 12 ** Internal interface definitions for SQLite. 13 ** 14 */ 15 #ifndef SQLITEINT_H 16 #define SQLITEINT_H 17 18 /* Special Comments: 19 ** 20 ** Some comments have special meaning to the tools that measure test 21 ** coverage: 22 ** 23 ** NO_TEST - The branches on this line are not 24 ** measured by branch coverage. This is 25 ** used on lines of code that actually 26 ** implement parts of coverage testing. 27 ** 28 ** OPTIMIZATION-IF-TRUE - This branch is allowed to alway be false 29 ** and the correct answer is still obtained, 30 ** though perhaps more slowly. 31 ** 32 ** OPTIMIZATION-IF-FALSE - This branch is allowed to alway be true 33 ** and the correct answer is still obtained, 34 ** though perhaps more slowly. 35 ** 36 ** PREVENTS-HARMLESS-OVERREAD - This branch prevents a buffer overread 37 ** that would be harmless and undetectable 38 ** if it did occur. 39 ** 40 ** In all cases, the special comment must be enclosed in the usual 41 ** slash-asterisk...asterisk-slash comment marks, with no spaces between the 42 ** asterisks and the comment text. 43 */ 44 45 /* 46 ** Make sure the Tcl calling convention macro is defined. This macro is 47 ** only used by test code and Tcl integration code. 48 */ 49 #ifndef SQLITE_TCLAPI 50 # define SQLITE_TCLAPI 51 #endif 52 53 /* 54 ** Include the header file used to customize the compiler options for MSVC. 55 ** This should be done first so that it can successfully prevent spurious 56 ** compiler warnings due to subsequent content in this file and other files 57 ** that are included by this file. 58 */ 59 #include "msvc.h" 60 61 /* 62 ** Special setup for VxWorks 63 */ 64 #include "vxworks.h" 65 66 /* 67 ** These #defines should enable >2GB file support on POSIX if the 68 ** underlying operating system supports it. If the OS lacks 69 ** large file support, or if the OS is windows, these should be no-ops. 70 ** 71 ** Ticket #2739: The _LARGEFILE_SOURCE macro must appear before any 72 ** system #includes. Hence, this block of code must be the very first 73 ** code in all source files. 74 ** 75 ** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch 76 ** on the compiler command line. This is necessary if you are compiling 77 ** on a recent machine (ex: Red Hat 7.2) but you want your code to work 78 ** on an older machine (ex: Red Hat 6.0). If you compile on Red Hat 7.2 79 ** without this option, LFS is enable. But LFS does not exist in the kernel 80 ** in Red Hat 6.0, so the code won't work. Hence, for maximum binary 81 ** portability you should omit LFS. 82 ** 83 ** The previous paragraph was written in 2005. (This paragraph is written 84 ** on 2008-11-28.) These days, all Linux kernels support large files, so 85 ** you should probably leave LFS enabled. But some embedded platforms might 86 ** lack LFS in which case the SQLITE_DISABLE_LFS macro might still be useful. 87 ** 88 ** Similar is true for Mac OS X. LFS is only supported on Mac OS X 9 and later. 89 */ 90 #ifndef SQLITE_DISABLE_LFS 91 # define _LARGE_FILE 1 92 # ifndef _FILE_OFFSET_BITS 93 # define _FILE_OFFSET_BITS 64 94 # endif 95 # define _LARGEFILE_SOURCE 1 96 #endif 97 98 /* The GCC_VERSION and MSVC_VERSION macros are used to 99 ** conditionally include optimizations for each of these compilers. A 100 ** value of 0 means that compiler is not being used. The 101 ** SQLITE_DISABLE_INTRINSIC macro means do not use any compiler-specific 102 ** optimizations, and hence set all compiler macros to 0 103 ** 104 ** There was once also a CLANG_VERSION macro. However, we learn that the 105 ** version numbers in clang are for "marketing" only and are inconsistent 106 ** and unreliable. Fortunately, all versions of clang also recognize the 107 ** gcc version numbers and have reasonable settings for gcc version numbers, 108 ** so the GCC_VERSION macro will be set to a correct non-zero value even 109 ** when compiling with clang. 110 */ 111 #if defined(__GNUC__) && !defined(SQLITE_DISABLE_INTRINSIC) 112 # define GCC_VERSION (__GNUC__*1000000+__GNUC_MINOR__*1000+__GNUC_PATCHLEVEL__) 113 #else 114 # define GCC_VERSION 0 115 #endif 116 #if defined(_MSC_VER) && !defined(SQLITE_DISABLE_INTRINSIC) 117 # define MSVC_VERSION _MSC_VER 118 #else 119 # define MSVC_VERSION 0 120 #endif 121 122 /* Needed for various definitions... */ 123 #if defined(__GNUC__) && !defined(_GNU_SOURCE) 124 # define _GNU_SOURCE 125 #endif 126 127 #if defined(__OpenBSD__) && !defined(_BSD_SOURCE) 128 # define _BSD_SOURCE 129 #endif 130 131 /* 132 ** For MinGW, check to see if we can include the header file containing its 133 ** version information, among other things. Normally, this internal MinGW 134 ** header file would [only] be included automatically by other MinGW header 135 ** files; however, the contained version information is now required by this 136 ** header file to work around binary compatibility issues (see below) and 137 ** this is the only known way to reliably obtain it. This entire #if block 138 ** would be completely unnecessary if there was any other way of detecting 139 ** MinGW via their preprocessor (e.g. if they customized their GCC to define 140 ** some MinGW-specific macros). When compiling for MinGW, either the 141 ** _HAVE_MINGW_H or _HAVE__MINGW_H (note the extra underscore) macro must be 142 ** defined; otherwise, detection of conditions specific to MinGW will be 143 ** disabled. 144 */ 145 #if defined(_HAVE_MINGW_H) 146 # include "mingw.h" 147 #elif defined(_HAVE__MINGW_H) 148 # include "_mingw.h" 149 #endif 150 151 /* 152 ** For MinGW version 4.x (and higher), check to see if the _USE_32BIT_TIME_T 153 ** define is required to maintain binary compatibility with the MSVC runtime 154 ** library in use (e.g. for Windows XP). 155 */ 156 #if !defined(_USE_32BIT_TIME_T) && !defined(_USE_64BIT_TIME_T) && \ 157 defined(_WIN32) && !defined(_WIN64) && \ 158 defined(__MINGW_MAJOR_VERSION) && __MINGW_MAJOR_VERSION >= 4 && \ 159 defined(__MSVCRT__) 160 # define _USE_32BIT_TIME_T 161 #endif 162 163 /* The public SQLite interface. The _FILE_OFFSET_BITS macro must appear 164 ** first in QNX. Also, the _USE_32BIT_TIME_T macro must appear first for 165 ** MinGW. 166 */ 167 #include "sqlite3.h" 168 169 /* 170 ** Include the configuration header output by 'configure' if we're using the 171 ** autoconf-based build 172 */ 173 #if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H) 174 #include "config.h" 175 #define SQLITECONFIG_H 1 176 #endif 177 178 #include "sqliteLimit.h" 179 180 /* Disable nuisance warnings on Borland compilers */ 181 #if defined(__BORLANDC__) 182 #pragma warn -rch /* unreachable code */ 183 #pragma warn -ccc /* Condition is always true or false */ 184 #pragma warn -aus /* Assigned value is never used */ 185 #pragma warn -csu /* Comparing signed and unsigned */ 186 #pragma warn -spa /* Suspicious pointer arithmetic */ 187 #endif 188 189 /* 190 ** Include standard header files as necessary 191 */ 192 #ifdef HAVE_STDINT_H 193 #include <stdint.h> 194 #endif 195 #ifdef HAVE_INTTYPES_H 196 #include <inttypes.h> 197 #endif 198 199 /* 200 ** The following macros are used to cast pointers to integers and 201 ** integers to pointers. The way you do this varies from one compiler 202 ** to the next, so we have developed the following set of #if statements 203 ** to generate appropriate macros for a wide range of compilers. 204 ** 205 ** The correct "ANSI" way to do this is to use the intptr_t type. 206 ** Unfortunately, that typedef is not available on all compilers, or 207 ** if it is available, it requires an #include of specific headers 208 ** that vary from one machine to the next. 209 ** 210 ** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on 211 ** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)). 212 ** So we have to define the macros in different ways depending on the 213 ** compiler. 214 */ 215 #if defined(__PTRDIFF_TYPE__) /* This case should work for GCC */ 216 # define SQLITE_INT_TO_PTR(X) ((void*)(__PTRDIFF_TYPE__)(X)) 217 # define SQLITE_PTR_TO_INT(X) ((int)(__PTRDIFF_TYPE__)(X)) 218 #elif !defined(__GNUC__) /* Works for compilers other than LLVM */ 219 # define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X]) 220 # define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0)) 221 #elif defined(HAVE_STDINT_H) /* Use this case if we have ANSI headers */ 222 # define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X)) 223 # define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X)) 224 #else /* Generates a warning - but it always works */ 225 # define SQLITE_INT_TO_PTR(X) ((void*)(X)) 226 # define SQLITE_PTR_TO_INT(X) ((int)(X)) 227 #endif 228 229 /* 230 ** A macro to hint to the compiler that a function should not be 231 ** inlined. 232 */ 233 #if defined(__GNUC__) 234 # define SQLITE_NOINLINE __attribute__((noinline)) 235 #elif defined(_MSC_VER) && _MSC_VER>=1310 236 # define SQLITE_NOINLINE __declspec(noinline) 237 #else 238 # define SQLITE_NOINLINE 239 #endif 240 241 /* 242 ** Make sure that the compiler intrinsics we desire are enabled when 243 ** compiling with an appropriate version of MSVC unless prevented by 244 ** the SQLITE_DISABLE_INTRINSIC define. 245 */ 246 #if !defined(SQLITE_DISABLE_INTRINSIC) 247 # if defined(_MSC_VER) && _MSC_VER>=1400 248 # if !defined(_WIN32_WCE) 249 # include <intrin.h> 250 # pragma intrinsic(_byteswap_ushort) 251 # pragma intrinsic(_byteswap_ulong) 252 # pragma intrinsic(_byteswap_uint64) 253 # pragma intrinsic(_ReadWriteBarrier) 254 # else 255 # include <cmnintrin.h> 256 # endif 257 # endif 258 #endif 259 260 /* 261 ** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2. 262 ** 0 means mutexes are permanently disable and the library is never 263 ** threadsafe. 1 means the library is serialized which is the highest 264 ** level of threadsafety. 2 means the library is multithreaded - multiple 265 ** threads can use SQLite as long as no two threads try to use the same 266 ** database connection at the same time. 267 ** 268 ** Older versions of SQLite used an optional THREADSAFE macro. 269 ** We support that for legacy. 270 ** 271 ** To ensure that the correct value of "THREADSAFE" is reported when querying 272 ** for compile-time options at runtime (e.g. "PRAGMA compile_options"), this 273 ** logic is partially replicated in ctime.c. If it is updated here, it should 274 ** also be updated there. 275 */ 276 #if !defined(SQLITE_THREADSAFE) 277 # if defined(THREADSAFE) 278 # define SQLITE_THREADSAFE THREADSAFE 279 # else 280 # define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */ 281 # endif 282 #endif 283 284 /* 285 ** Powersafe overwrite is on by default. But can be turned off using 286 ** the -DSQLITE_POWERSAFE_OVERWRITE=0 command-line option. 287 */ 288 #ifndef SQLITE_POWERSAFE_OVERWRITE 289 # define SQLITE_POWERSAFE_OVERWRITE 1 290 #endif 291 292 /* 293 ** EVIDENCE-OF: R-25715-37072 Memory allocation statistics are enabled by 294 ** default unless SQLite is compiled with SQLITE_DEFAULT_MEMSTATUS=0 in 295 ** which case memory allocation statistics are disabled by default. 296 */ 297 #if !defined(SQLITE_DEFAULT_MEMSTATUS) 298 # define SQLITE_DEFAULT_MEMSTATUS 1 299 #endif 300 301 /* 302 ** Exactly one of the following macros must be defined in order to 303 ** specify which memory allocation subsystem to use. 304 ** 305 ** SQLITE_SYSTEM_MALLOC // Use normal system malloc() 306 ** SQLITE_WIN32_MALLOC // Use Win32 native heap API 307 ** SQLITE_ZERO_MALLOC // Use a stub allocator that always fails 308 ** SQLITE_MEMDEBUG // Debugging version of system malloc() 309 ** 310 ** On Windows, if the SQLITE_WIN32_MALLOC_VALIDATE macro is defined and the 311 ** assert() macro is enabled, each call into the Win32 native heap subsystem 312 ** will cause HeapValidate to be called. If heap validation should fail, an 313 ** assertion will be triggered. 314 ** 315 ** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as 316 ** the default. 317 */ 318 #if defined(SQLITE_SYSTEM_MALLOC) \ 319 + defined(SQLITE_WIN32_MALLOC) \ 320 + defined(SQLITE_ZERO_MALLOC) \ 321 + defined(SQLITE_MEMDEBUG)>1 322 # error "Two or more of the following compile-time configuration options\ 323 are defined but at most one is allowed:\ 324 SQLITE_SYSTEM_MALLOC, SQLITE_WIN32_MALLOC, SQLITE_MEMDEBUG,\ 325 SQLITE_ZERO_MALLOC" 326 #endif 327 #if defined(SQLITE_SYSTEM_MALLOC) \ 328 + defined(SQLITE_WIN32_MALLOC) \ 329 + defined(SQLITE_ZERO_MALLOC) \ 330 + defined(SQLITE_MEMDEBUG)==0 331 # define SQLITE_SYSTEM_MALLOC 1 332 #endif 333 334 /* 335 ** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the 336 ** sizes of memory allocations below this value where possible. 337 */ 338 #if !defined(SQLITE_MALLOC_SOFT_LIMIT) 339 # define SQLITE_MALLOC_SOFT_LIMIT 1024 340 #endif 341 342 /* 343 ** We need to define _XOPEN_SOURCE as follows in order to enable 344 ** recursive mutexes on most Unix systems and fchmod() on OpenBSD. 345 ** But _XOPEN_SOURCE define causes problems for Mac OS X, so omit 346 ** it. 347 */ 348 #if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__) 349 # define _XOPEN_SOURCE 600 350 #endif 351 352 /* 353 ** NDEBUG and SQLITE_DEBUG are opposites. It should always be true that 354 ** defined(NDEBUG)==!defined(SQLITE_DEBUG). If this is not currently true, 355 ** make it true by defining or undefining NDEBUG. 356 ** 357 ** Setting NDEBUG makes the code smaller and faster by disabling the 358 ** assert() statements in the code. So we want the default action 359 ** to be for NDEBUG to be set and NDEBUG to be undefined only if SQLITE_DEBUG 360 ** is set. Thus NDEBUG becomes an opt-in rather than an opt-out 361 ** feature. 362 */ 363 #if !defined(NDEBUG) && !defined(SQLITE_DEBUG) 364 # define NDEBUG 1 365 #endif 366 #if defined(NDEBUG) && defined(SQLITE_DEBUG) 367 # undef NDEBUG 368 #endif 369 370 /* 371 ** Enable SQLITE_ENABLE_EXPLAIN_COMMENTS if SQLITE_DEBUG is turned on. 372 */ 373 #if !defined(SQLITE_ENABLE_EXPLAIN_COMMENTS) && defined(SQLITE_DEBUG) 374 # define SQLITE_ENABLE_EXPLAIN_COMMENTS 1 375 #endif 376 377 /* 378 ** The testcase() macro is used to aid in coverage testing. When 379 ** doing coverage testing, the condition inside the argument to 380 ** testcase() must be evaluated both true and false in order to 381 ** get full branch coverage. The testcase() macro is inserted 382 ** to help ensure adequate test coverage in places where simple 383 ** condition/decision coverage is inadequate. For example, testcase() 384 ** can be used to make sure boundary values are tested. For 385 ** bitmask tests, testcase() can be used to make sure each bit 386 ** is significant and used at least once. On switch statements 387 ** where multiple cases go to the same block of code, testcase() 388 ** can insure that all cases are evaluated. 389 ** 390 */ 391 #ifdef SQLITE_COVERAGE_TEST 392 void sqlite3Coverage(int); 393 # define testcase(X) if( X ){ sqlite3Coverage(__LINE__); } 394 #else 395 # define testcase(X) 396 #endif 397 398 /* 399 ** The TESTONLY macro is used to enclose variable declarations or 400 ** other bits of code that are needed to support the arguments 401 ** within testcase() and assert() macros. 402 */ 403 #if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST) 404 # define TESTONLY(X) X 405 #else 406 # define TESTONLY(X) 407 #endif 408 409 /* 410 ** Sometimes we need a small amount of code such as a variable initialization 411 ** to setup for a later assert() statement. We do not want this code to 412 ** appear when assert() is disabled. The following macro is therefore 413 ** used to contain that setup code. The "VVA" acronym stands for 414 ** "Verification, Validation, and Accreditation". In other words, the 415 ** code within VVA_ONLY() will only run during verification processes. 416 */ 417 #ifndef NDEBUG 418 # define VVA_ONLY(X) X 419 #else 420 # define VVA_ONLY(X) 421 #endif 422 423 /* 424 ** The ALWAYS and NEVER macros surround boolean expressions which 425 ** are intended to always be true or false, respectively. Such 426 ** expressions could be omitted from the code completely. But they 427 ** are included in a few cases in order to enhance the resilience 428 ** of SQLite to unexpected behavior - to make the code "self-healing" 429 ** or "ductile" rather than being "brittle" and crashing at the first 430 ** hint of unplanned behavior. 431 ** 432 ** In other words, ALWAYS and NEVER are added for defensive code. 433 ** 434 ** When doing coverage testing ALWAYS and NEVER are hard-coded to 435 ** be true and false so that the unreachable code they specify will 436 ** not be counted as untested code. 437 */ 438 #if defined(SQLITE_COVERAGE_TEST) || defined(SQLITE_MUTATION_TEST) 439 # define ALWAYS(X) (1) 440 # define NEVER(X) (0) 441 #elif !defined(NDEBUG) 442 # define ALWAYS(X) ((X)?1:(assert(0),0)) 443 # define NEVER(X) ((X)?(assert(0),1):0) 444 #else 445 # define ALWAYS(X) (X) 446 # define NEVER(X) (X) 447 #endif 448 449 /* 450 ** Some conditionals are optimizations only. In other words, if the 451 ** conditionals are replaced with a constant 1 (true) or 0 (false) then 452 ** the correct answer is still obtained, though perhaps not as quickly. 453 ** 454 ** The following macros mark these optimizations conditionals. 455 */ 456 #if defined(SQLITE_MUTATION_TEST) 457 # define OK_IF_ALWAYS_TRUE(X) (1) 458 # define OK_IF_ALWAYS_FALSE(X) (0) 459 #else 460 # define OK_IF_ALWAYS_TRUE(X) (X) 461 # define OK_IF_ALWAYS_FALSE(X) (X) 462 #endif 463 464 /* 465 ** Some malloc failures are only possible if SQLITE_TEST_REALLOC_STRESS is 466 ** defined. We need to defend against those failures when testing with 467 ** SQLITE_TEST_REALLOC_STRESS, but we don't want the unreachable branches 468 ** during a normal build. The following macro can be used to disable tests 469 ** that are always false except when SQLITE_TEST_REALLOC_STRESS is set. 470 */ 471 #if defined(SQLITE_TEST_REALLOC_STRESS) 472 # define ONLY_IF_REALLOC_STRESS(X) (X) 473 #elif !defined(NDEBUG) 474 # define ONLY_IF_REALLOC_STRESS(X) ((X)?(assert(0),1):0) 475 #else 476 # define ONLY_IF_REALLOC_STRESS(X) (0) 477 #endif 478 479 /* 480 ** Declarations used for tracing the operating system interfaces. 481 */ 482 #if defined(SQLITE_FORCE_OS_TRACE) || defined(SQLITE_TEST) || \ 483 (defined(SQLITE_DEBUG) && SQLITE_OS_WIN) 484 extern int sqlite3OSTrace; 485 # define OSTRACE(X) if( sqlite3OSTrace ) sqlite3DebugPrintf X 486 # define SQLITE_HAVE_OS_TRACE 487 #else 488 # define OSTRACE(X) 489 # undef SQLITE_HAVE_OS_TRACE 490 #endif 491 492 /* 493 ** Is the sqlite3ErrName() function needed in the build? Currently, 494 ** it is needed by "mutex_w32.c" (when debugging), "os_win.c" (when 495 ** OSTRACE is enabled), and by several "test*.c" files (which are 496 ** compiled using SQLITE_TEST). 497 */ 498 #if defined(SQLITE_HAVE_OS_TRACE) || defined(SQLITE_TEST) || \ 499 (defined(SQLITE_DEBUG) && SQLITE_OS_WIN) 500 # define SQLITE_NEED_ERR_NAME 501 #else 502 # undef SQLITE_NEED_ERR_NAME 503 #endif 504 505 /* 506 ** SQLITE_ENABLE_EXPLAIN_COMMENTS is incompatible with SQLITE_OMIT_EXPLAIN 507 */ 508 #ifdef SQLITE_OMIT_EXPLAIN 509 # undef SQLITE_ENABLE_EXPLAIN_COMMENTS 510 #endif 511 512 /* 513 ** Return true (non-zero) if the input is an integer that is too large 514 ** to fit in 32-bits. This macro is used inside of various testcase() 515 ** macros to verify that we have tested SQLite for large-file support. 516 */ 517 #define IS_BIG_INT(X) (((X)&~(i64)0xffffffff)!=0) 518 519 /* 520 ** The macro unlikely() is a hint that surrounds a boolean 521 ** expression that is usually false. Macro likely() surrounds 522 ** a boolean expression that is usually true. These hints could, 523 ** in theory, be used by the compiler to generate better code, but 524 ** currently they are just comments for human readers. 525 */ 526 #define likely(X) (X) 527 #define unlikely(X) (X) 528 529 #include "hash.h" 530 #include "parse.h" 531 #include <stdio.h> 532 #include <stdlib.h> 533 #include <string.h> 534 #include <assert.h> 535 #include <stddef.h> 536 537 /* 538 ** Use a macro to replace memcpy() if compiled with SQLITE_INLINE_MEMCPY. 539 ** This allows better measurements of where memcpy() is used when running 540 ** cachegrind. But this macro version of memcpy() is very slow so it 541 ** should not be used in production. This is a performance measurement 542 ** hack only. 543 */ 544 #ifdef SQLITE_INLINE_MEMCPY 545 # define memcpy(D,S,N) {char*xxd=(char*)(D);const char*xxs=(const char*)(S);\ 546 int xxn=(N);while(xxn-->0)*(xxd++)=*(xxs++);} 547 #endif 548 549 /* 550 ** If compiling for a processor that lacks floating point support, 551 ** substitute integer for floating-point 552 */ 553 #ifdef SQLITE_OMIT_FLOATING_POINT 554 # define double sqlite_int64 555 # define float sqlite_int64 556 # define LONGDOUBLE_TYPE sqlite_int64 557 # ifndef SQLITE_BIG_DBL 558 # define SQLITE_BIG_DBL (((sqlite3_int64)1)<<50) 559 # endif 560 # define SQLITE_OMIT_DATETIME_FUNCS 1 561 # define SQLITE_OMIT_TRACE 1 562 # undef SQLITE_MIXED_ENDIAN_64BIT_FLOAT 563 # undef SQLITE_HAVE_ISNAN 564 #endif 565 #ifndef SQLITE_BIG_DBL 566 # define SQLITE_BIG_DBL (1e99) 567 #endif 568 569 /* 570 ** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0 571 ** afterward. Having this macro allows us to cause the C compiler 572 ** to omit code used by TEMP tables without messy #ifndef statements. 573 */ 574 #ifdef SQLITE_OMIT_TEMPDB 575 #define OMIT_TEMPDB 1 576 #else 577 #define OMIT_TEMPDB 0 578 #endif 579 580 /* 581 ** The "file format" number is an integer that is incremented whenever 582 ** the VDBE-level file format changes. The following macros define the 583 ** the default file format for new databases and the maximum file format 584 ** that the library can read. 585 */ 586 #define SQLITE_MAX_FILE_FORMAT 4 587 #ifndef SQLITE_DEFAULT_FILE_FORMAT 588 # define SQLITE_DEFAULT_FILE_FORMAT 4 589 #endif 590 591 /* 592 ** Determine whether triggers are recursive by default. This can be 593 ** changed at run-time using a pragma. 594 */ 595 #ifndef SQLITE_DEFAULT_RECURSIVE_TRIGGERS 596 # define SQLITE_DEFAULT_RECURSIVE_TRIGGERS 0 597 #endif 598 599 /* 600 ** Provide a default value for SQLITE_TEMP_STORE in case it is not specified 601 ** on the command-line 602 */ 603 #ifndef SQLITE_TEMP_STORE 604 # define SQLITE_TEMP_STORE 1 605 #endif 606 607 /* 608 ** If no value has been provided for SQLITE_MAX_WORKER_THREADS, or if 609 ** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it 610 ** to zero. 611 */ 612 #if SQLITE_TEMP_STORE==3 || SQLITE_THREADSAFE==0 613 # undef SQLITE_MAX_WORKER_THREADS 614 # define SQLITE_MAX_WORKER_THREADS 0 615 #endif 616 #ifndef SQLITE_MAX_WORKER_THREADS 617 # define SQLITE_MAX_WORKER_THREADS 8 618 #endif 619 #ifndef SQLITE_DEFAULT_WORKER_THREADS 620 # define SQLITE_DEFAULT_WORKER_THREADS 0 621 #endif 622 #if SQLITE_DEFAULT_WORKER_THREADS>SQLITE_MAX_WORKER_THREADS 623 # undef SQLITE_MAX_WORKER_THREADS 624 # define SQLITE_MAX_WORKER_THREADS SQLITE_DEFAULT_WORKER_THREADS 625 #endif 626 627 /* 628 ** The default initial allocation for the pagecache when using separate 629 ** pagecaches for each database connection. A positive number is the 630 ** number of pages. A negative number N translations means that a buffer 631 ** of -1024*N bytes is allocated and used for as many pages as it will hold. 632 ** 633 ** The default value of "20" was choosen to minimize the run-time of the 634 ** speedtest1 test program with options: --shrink-memory --reprepare 635 */ 636 #ifndef SQLITE_DEFAULT_PCACHE_INITSZ 637 # define SQLITE_DEFAULT_PCACHE_INITSZ 20 638 #endif 639 640 /* 641 ** Default value for the SQLITE_CONFIG_SORTERREF_SIZE option. 642 */ 643 #ifndef SQLITE_DEFAULT_SORTERREF_SIZE 644 # define SQLITE_DEFAULT_SORTERREF_SIZE 0x7fffffff 645 #endif 646 647 /* 648 ** The compile-time options SQLITE_MMAP_READWRITE and 649 ** SQLITE_ENABLE_BATCH_ATOMIC_WRITE are not compatible with one another. 650 ** You must choose one or the other (or neither) but not both. 651 */ 652 #if defined(SQLITE_MMAP_READWRITE) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) 653 #error Cannot use both SQLITE_MMAP_READWRITE and SQLITE_ENABLE_BATCH_ATOMIC_WRITE 654 #endif 655 656 /* 657 ** GCC does not define the offsetof() macro so we'll have to do it 658 ** ourselves. 659 */ 660 #ifndef offsetof 661 #define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD)) 662 #endif 663 664 /* 665 ** Macros to compute minimum and maximum of two numbers. 666 */ 667 #ifndef MIN 668 # define MIN(A,B) ((A)<(B)?(A):(B)) 669 #endif 670 #ifndef MAX 671 # define MAX(A,B) ((A)>(B)?(A):(B)) 672 #endif 673 674 /* 675 ** Swap two objects of type TYPE. 676 */ 677 #define SWAP(TYPE,A,B) {TYPE t=A; A=B; B=t;} 678 679 /* 680 ** Check to see if this machine uses EBCDIC. (Yes, believe it or 681 ** not, there are still machines out there that use EBCDIC.) 682 */ 683 #if 'A' == '\301' 684 # define SQLITE_EBCDIC 1 685 #else 686 # define SQLITE_ASCII 1 687 #endif 688 689 /* 690 ** Integers of known sizes. These typedefs might change for architectures 691 ** where the sizes very. Preprocessor macros are available so that the 692 ** types can be conveniently redefined at compile-type. Like this: 693 ** 694 ** cc '-DUINTPTR_TYPE=long long int' ... 695 */ 696 #ifndef UINT32_TYPE 697 # ifdef HAVE_UINT32_T 698 # define UINT32_TYPE uint32_t 699 # else 700 # define UINT32_TYPE unsigned int 701 # endif 702 #endif 703 #ifndef UINT16_TYPE 704 # ifdef HAVE_UINT16_T 705 # define UINT16_TYPE uint16_t 706 # else 707 # define UINT16_TYPE unsigned short int 708 # endif 709 #endif 710 #ifndef INT16_TYPE 711 # ifdef HAVE_INT16_T 712 # define INT16_TYPE int16_t 713 # else 714 # define INT16_TYPE short int 715 # endif 716 #endif 717 #ifndef UINT8_TYPE 718 # ifdef HAVE_UINT8_T 719 # define UINT8_TYPE uint8_t 720 # else 721 # define UINT8_TYPE unsigned char 722 # endif 723 #endif 724 #ifndef INT8_TYPE 725 # ifdef HAVE_INT8_T 726 # define INT8_TYPE int8_t 727 # else 728 # define INT8_TYPE signed char 729 # endif 730 #endif 731 #ifndef LONGDOUBLE_TYPE 732 # define LONGDOUBLE_TYPE long double 733 #endif 734 typedef sqlite_int64 i64; /* 8-byte signed integer */ 735 typedef sqlite_uint64 u64; /* 8-byte unsigned integer */ 736 typedef UINT32_TYPE u32; /* 4-byte unsigned integer */ 737 typedef UINT16_TYPE u16; /* 2-byte unsigned integer */ 738 typedef INT16_TYPE i16; /* 2-byte signed integer */ 739 typedef UINT8_TYPE u8; /* 1-byte unsigned integer */ 740 typedef INT8_TYPE i8; /* 1-byte signed integer */ 741 742 /* 743 ** SQLITE_MAX_U32 is a u64 constant that is the maximum u64 value 744 ** that can be stored in a u32 without loss of data. The value 745 ** is 0x00000000ffffffff. But because of quirks of some compilers, we 746 ** have to specify the value in the less intuitive manner shown: 747 */ 748 #define SQLITE_MAX_U32 ((((u64)1)<<32)-1) 749 750 /* 751 ** The datatype used to store estimates of the number of rows in a 752 ** table or index. This is an unsigned integer type. For 99.9% of 753 ** the world, a 32-bit integer is sufficient. But a 64-bit integer 754 ** can be used at compile-time if desired. 755 */ 756 #ifdef SQLITE_64BIT_STATS 757 typedef u64 tRowcnt; /* 64-bit only if requested at compile-time */ 758 #else 759 typedef u32 tRowcnt; /* 32-bit is the default */ 760 #endif 761 762 /* 763 ** Estimated quantities used for query planning are stored as 16-bit 764 ** logarithms. For quantity X, the value stored is 10*log2(X). This 765 ** gives a possible range of values of approximately 1.0e986 to 1e-986. 766 ** But the allowed values are "grainy". Not every value is representable. 767 ** For example, quantities 16 and 17 are both represented by a LogEst 768 ** of 40. However, since LogEst quantities are suppose to be estimates, 769 ** not exact values, this imprecision is not a problem. 770 ** 771 ** "LogEst" is short for "Logarithmic Estimate". 772 ** 773 ** Examples: 774 ** 1 -> 0 20 -> 43 10000 -> 132 775 ** 2 -> 10 25 -> 46 25000 -> 146 776 ** 3 -> 16 100 -> 66 1000000 -> 199 777 ** 4 -> 20 1000 -> 99 1048576 -> 200 778 ** 10 -> 33 1024 -> 100 4294967296 -> 320 779 ** 780 ** The LogEst can be negative to indicate fractional values. 781 ** Examples: 782 ** 783 ** 0.5 -> -10 0.1 -> -33 0.0625 -> -40 784 */ 785 typedef INT16_TYPE LogEst; 786 787 /* 788 ** Set the SQLITE_PTRSIZE macro to the number of bytes in a pointer 789 */ 790 #ifndef SQLITE_PTRSIZE 791 # if defined(__SIZEOF_POINTER__) 792 # define SQLITE_PTRSIZE __SIZEOF_POINTER__ 793 # elif defined(i386) || defined(__i386__) || defined(_M_IX86) || \ 794 defined(_M_ARM) || defined(__arm__) || defined(__x86) 795 # define SQLITE_PTRSIZE 4 796 # else 797 # define SQLITE_PTRSIZE 8 798 # endif 799 #endif 800 801 /* The uptr type is an unsigned integer large enough to hold a pointer 802 */ 803 #if defined(HAVE_STDINT_H) 804 typedef uintptr_t uptr; 805 #elif SQLITE_PTRSIZE==4 806 typedef u32 uptr; 807 #else 808 typedef u64 uptr; 809 #endif 810 811 /* 812 ** The SQLITE_WITHIN(P,S,E) macro checks to see if pointer P points to 813 ** something between S (inclusive) and E (exclusive). 814 ** 815 ** In other words, S is a buffer and E is a pointer to the first byte after 816 ** the end of buffer S. This macro returns true if P points to something 817 ** contained within the buffer S. 818 */ 819 #define SQLITE_WITHIN(P,S,E) (((uptr)(P)>=(uptr)(S))&&((uptr)(P)<(uptr)(E))) 820 821 822 /* 823 ** Macros to determine whether the machine is big or little endian, 824 ** and whether or not that determination is run-time or compile-time. 825 ** 826 ** For best performance, an attempt is made to guess at the byte-order 827 ** using C-preprocessor macros. If that is unsuccessful, or if 828 ** -DSQLITE_BYTEORDER=0 is set, then byte-order is determined 829 ** at run-time. 830 */ 831 #ifndef SQLITE_BYTEORDER 832 # if defined(i386) || defined(__i386__) || defined(_M_IX86) || \ 833 defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || \ 834 defined(_M_AMD64) || defined(_M_ARM) || defined(__x86) || \ 835 defined(__arm__) 836 # define SQLITE_BYTEORDER 1234 837 # elif defined(sparc) || defined(__ppc__) 838 # define SQLITE_BYTEORDER 4321 839 # else 840 # define SQLITE_BYTEORDER 0 841 # endif 842 #endif 843 #if SQLITE_BYTEORDER==4321 844 # define SQLITE_BIGENDIAN 1 845 # define SQLITE_LITTLEENDIAN 0 846 # define SQLITE_UTF16NATIVE SQLITE_UTF16BE 847 #elif SQLITE_BYTEORDER==1234 848 # define SQLITE_BIGENDIAN 0 849 # define SQLITE_LITTLEENDIAN 1 850 # define SQLITE_UTF16NATIVE SQLITE_UTF16LE 851 #else 852 # ifdef SQLITE_AMALGAMATION 853 const int sqlite3one = 1; 854 # else 855 extern const int sqlite3one; 856 # endif 857 # define SQLITE_BIGENDIAN (*(char *)(&sqlite3one)==0) 858 # define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1) 859 # define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE) 860 #endif 861 862 /* 863 ** Constants for the largest and smallest possible 64-bit signed integers. 864 ** These macros are designed to work correctly on both 32-bit and 64-bit 865 ** compilers. 866 */ 867 #define LARGEST_INT64 (0xffffffff|(((i64)0x7fffffff)<<32)) 868 #define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64) 869 870 /* 871 ** Round up a number to the next larger multiple of 8. This is used 872 ** to force 8-byte alignment on 64-bit architectures. 873 */ 874 #define ROUND8(x) (((x)+7)&~7) 875 876 /* 877 ** Round down to the nearest multiple of 8 878 */ 879 #define ROUNDDOWN8(x) ((x)&~7) 880 881 /* 882 ** Assert that the pointer X is aligned to an 8-byte boundary. This 883 ** macro is used only within assert() to verify that the code gets 884 ** all alignment restrictions correct. 885 ** 886 ** Except, if SQLITE_4_BYTE_ALIGNED_MALLOC is defined, then the 887 ** underlying malloc() implementation might return us 4-byte aligned 888 ** pointers. In that case, only verify 4-byte alignment. 889 */ 890 #ifdef SQLITE_4_BYTE_ALIGNED_MALLOC 891 # define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&3)==0) 892 #else 893 # define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&7)==0) 894 #endif 895 896 /* 897 ** Disable MMAP on platforms where it is known to not work 898 */ 899 #if defined(__OpenBSD__) || defined(__QNXNTO__) 900 # undef SQLITE_MAX_MMAP_SIZE 901 # define SQLITE_MAX_MMAP_SIZE 0 902 #endif 903 904 /* 905 ** Default maximum size of memory used by memory-mapped I/O in the VFS 906 */ 907 #ifdef __APPLE__ 908 # include <TargetConditionals.h> 909 #endif 910 #ifndef SQLITE_MAX_MMAP_SIZE 911 # if defined(__linux__) \ 912 || defined(_WIN32) \ 913 || (defined(__APPLE__) && defined(__MACH__)) \ 914 || defined(__sun) \ 915 || defined(__FreeBSD__) \ 916 || defined(__DragonFly__) 917 # define SQLITE_MAX_MMAP_SIZE 0x7fff0000 /* 2147418112 */ 918 # else 919 # define SQLITE_MAX_MMAP_SIZE 0 920 # endif 921 #endif 922 923 /* 924 ** The default MMAP_SIZE is zero on all platforms. Or, even if a larger 925 ** default MMAP_SIZE is specified at compile-time, make sure that it does 926 ** not exceed the maximum mmap size. 927 */ 928 #ifndef SQLITE_DEFAULT_MMAP_SIZE 929 # define SQLITE_DEFAULT_MMAP_SIZE 0 930 #endif 931 #if SQLITE_DEFAULT_MMAP_SIZE>SQLITE_MAX_MMAP_SIZE 932 # undef SQLITE_DEFAULT_MMAP_SIZE 933 # define SQLITE_DEFAULT_MMAP_SIZE SQLITE_MAX_MMAP_SIZE 934 #endif 935 936 /* 937 ** Only one of SQLITE_ENABLE_STAT3 or SQLITE_ENABLE_STAT4 can be defined. 938 ** Priority is given to SQLITE_ENABLE_STAT4. If either are defined, also 939 ** define SQLITE_ENABLE_STAT3_OR_STAT4 940 */ 941 #ifdef SQLITE_ENABLE_STAT4 942 # undef SQLITE_ENABLE_STAT3 943 # define SQLITE_ENABLE_STAT3_OR_STAT4 1 944 #elif SQLITE_ENABLE_STAT3 945 # define SQLITE_ENABLE_STAT3_OR_STAT4 1 946 #elif SQLITE_ENABLE_STAT3_OR_STAT4 947 # undef SQLITE_ENABLE_STAT3_OR_STAT4 948 #endif 949 950 /* 951 ** SELECTTRACE_ENABLED will be either 1 or 0 depending on whether or not 952 ** the Select query generator tracing logic is turned on. 953 */ 954 #if defined(SQLITE_ENABLE_SELECTTRACE) 955 # define SELECTTRACE_ENABLED 1 956 #else 957 # define SELECTTRACE_ENABLED 0 958 #endif 959 960 /* 961 ** An instance of the following structure is used to store the busy-handler 962 ** callback for a given sqlite handle. 963 ** 964 ** The sqlite.busyHandler member of the sqlite struct contains the busy 965 ** callback for the database handle. Each pager opened via the sqlite 966 ** handle is passed a pointer to sqlite.busyHandler. The busy-handler 967 ** callback is currently invoked only from within pager.c. 968 */ 969 typedef struct BusyHandler BusyHandler; 970 struct BusyHandler { 971 int (*xBusyHandler)(void *,int); /* The busy callback */ 972 void *pBusyArg; /* First arg to busy callback */ 973 int nBusy; /* Incremented with each busy call */ 974 u8 bExtraFileArg; /* Include sqlite3_file as callback arg */ 975 }; 976 977 /* 978 ** Name of the master database table. The master database table 979 ** is a special table that holds the names and attributes of all 980 ** user tables and indices. 981 */ 982 #define MASTER_NAME "sqlite_master" 983 #define TEMP_MASTER_NAME "sqlite_temp_master" 984 985 /* 986 ** The root-page of the master database table. 987 */ 988 #define MASTER_ROOT 1 989 990 /* 991 ** The name of the schema table. 992 */ 993 #define SCHEMA_TABLE(x) ((!OMIT_TEMPDB)&&(x==1)?TEMP_MASTER_NAME:MASTER_NAME) 994 995 /* 996 ** A convenience macro that returns the number of elements in 997 ** an array. 998 */ 999 #define ArraySize(X) ((int)(sizeof(X)/sizeof(X[0]))) 1000 1001 /* 1002 ** Determine if the argument is a power of two 1003 */ 1004 #define IsPowerOfTwo(X) (((X)&((X)-1))==0) 1005 1006 /* 1007 ** The following value as a destructor means to use sqlite3DbFree(). 1008 ** The sqlite3DbFree() routine requires two parameters instead of the 1009 ** one parameter that destructors normally want. So we have to introduce 1010 ** this magic value that the code knows to handle differently. Any 1011 ** pointer will work here as long as it is distinct from SQLITE_STATIC 1012 ** and SQLITE_TRANSIENT. 1013 */ 1014 #define SQLITE_DYNAMIC ((sqlite3_destructor_type)sqlite3MallocSize) 1015 1016 /* 1017 ** When SQLITE_OMIT_WSD is defined, it means that the target platform does 1018 ** not support Writable Static Data (WSD) such as global and static variables. 1019 ** All variables must either be on the stack or dynamically allocated from 1020 ** the heap. When WSD is unsupported, the variable declarations scattered 1021 ** throughout the SQLite code must become constants instead. The SQLITE_WSD 1022 ** macro is used for this purpose. And instead of referencing the variable 1023 ** directly, we use its constant as a key to lookup the run-time allocated 1024 ** buffer that holds real variable. The constant is also the initializer 1025 ** for the run-time allocated buffer. 1026 ** 1027 ** In the usual case where WSD is supported, the SQLITE_WSD and GLOBAL 1028 ** macros become no-ops and have zero performance impact. 1029 */ 1030 #ifdef SQLITE_OMIT_WSD 1031 #define SQLITE_WSD const 1032 #define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v))) 1033 #define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config) 1034 int sqlite3_wsd_init(int N, int J); 1035 void *sqlite3_wsd_find(void *K, int L); 1036 #else 1037 #define SQLITE_WSD 1038 #define GLOBAL(t,v) v 1039 #define sqlite3GlobalConfig sqlite3Config 1040 #endif 1041 1042 /* 1043 ** The following macros are used to suppress compiler warnings and to 1044 ** make it clear to human readers when a function parameter is deliberately 1045 ** left unused within the body of a function. This usually happens when 1046 ** a function is called via a function pointer. For example the 1047 ** implementation of an SQL aggregate step callback may not use the 1048 ** parameter indicating the number of arguments passed to the aggregate, 1049 ** if it knows that this is enforced elsewhere. 1050 ** 1051 ** When a function parameter is not used at all within the body of a function, 1052 ** it is generally named "NotUsed" or "NotUsed2" to make things even clearer. 1053 ** However, these macros may also be used to suppress warnings related to 1054 ** parameters that may or may not be used depending on compilation options. 1055 ** For example those parameters only used in assert() statements. In these 1056 ** cases the parameters are named as per the usual conventions. 1057 */ 1058 #define UNUSED_PARAMETER(x) (void)(x) 1059 #define UNUSED_PARAMETER2(x,y) UNUSED_PARAMETER(x),UNUSED_PARAMETER(y) 1060 1061 /* 1062 ** Forward references to structures 1063 */ 1064 typedef struct AggInfo AggInfo; 1065 typedef struct AuthContext AuthContext; 1066 typedef struct AutoincInfo AutoincInfo; 1067 typedef struct Bitvec Bitvec; 1068 typedef struct CollSeq CollSeq; 1069 typedef struct Column Column; 1070 typedef struct Db Db; 1071 typedef struct Schema Schema; 1072 typedef struct Expr Expr; 1073 typedef struct ExprList ExprList; 1074 typedef struct FKey FKey; 1075 typedef struct FuncDestructor FuncDestructor; 1076 typedef struct FuncDef FuncDef; 1077 typedef struct FuncDefHash FuncDefHash; 1078 typedef struct IdList IdList; 1079 typedef struct Index Index; 1080 typedef struct IndexSample IndexSample; 1081 typedef struct KeyClass KeyClass; 1082 typedef struct KeyInfo KeyInfo; 1083 typedef struct Lookaside Lookaside; 1084 typedef struct LookasideSlot LookasideSlot; 1085 typedef struct Module Module; 1086 typedef struct NameContext NameContext; 1087 typedef struct Parse Parse; 1088 typedef struct PreUpdate PreUpdate; 1089 typedef struct PrintfArguments PrintfArguments; 1090 typedef struct RowSet RowSet; 1091 typedef struct Savepoint Savepoint; 1092 typedef struct Select Select; 1093 typedef struct SQLiteThread SQLiteThread; 1094 typedef struct SelectDest SelectDest; 1095 typedef struct SrcList SrcList; 1096 typedef struct sqlite3_str StrAccum; /* Internal alias for sqlite3_str */ 1097 typedef struct Table Table; 1098 typedef struct TableLock TableLock; 1099 typedef struct Token Token; 1100 typedef struct TreeView TreeView; 1101 typedef struct Trigger Trigger; 1102 typedef struct TriggerPrg TriggerPrg; 1103 typedef struct TriggerStep TriggerStep; 1104 typedef struct UnpackedRecord UnpackedRecord; 1105 typedef struct Upsert Upsert; 1106 typedef struct VTable VTable; 1107 typedef struct VtabCtx VtabCtx; 1108 typedef struct Walker Walker; 1109 typedef struct WhereInfo WhereInfo; 1110 typedef struct With With; 1111 1112 /* A VList object records a mapping between parameters/variables/wildcards 1113 ** in the SQL statement (such as $abc, @pqr, or :xyz) and the integer 1114 ** variable number associated with that parameter. See the format description 1115 ** on the sqlite3VListAdd() routine for more information. A VList is really 1116 ** just an array of integers. 1117 */ 1118 typedef int VList; 1119 1120 /* 1121 ** Defer sourcing vdbe.h and btree.h until after the "u8" and 1122 ** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque 1123 ** pointer types (i.e. FuncDef) defined above. 1124 */ 1125 #include "btree.h" 1126 #include "vdbe.h" 1127 #include "pager.h" 1128 #include "pcache.h" 1129 #include "os.h" 1130 #include "mutex.h" 1131 1132 /* The SQLITE_EXTRA_DURABLE compile-time option used to set the default 1133 ** synchronous setting to EXTRA. It is no longer supported. 1134 */ 1135 #ifdef SQLITE_EXTRA_DURABLE 1136 # warning Use SQLITE_DEFAULT_SYNCHRONOUS=3 instead of SQLITE_EXTRA_DURABLE 1137 # define SQLITE_DEFAULT_SYNCHRONOUS 3 1138 #endif 1139 1140 /* 1141 ** Default synchronous levels. 1142 ** 1143 ** Note that (for historcal reasons) the PAGER_SYNCHRONOUS_* macros differ 1144 ** from the SQLITE_DEFAULT_SYNCHRONOUS value by 1. 1145 ** 1146 ** PAGER_SYNCHRONOUS DEFAULT_SYNCHRONOUS 1147 ** OFF 1 0 1148 ** NORMAL 2 1 1149 ** FULL 3 2 1150 ** EXTRA 4 3 1151 ** 1152 ** The "PRAGMA synchronous" statement also uses the zero-based numbers. 1153 ** In other words, the zero-based numbers are used for all external interfaces 1154 ** and the one-based values are used internally. 1155 */ 1156 #ifndef SQLITE_DEFAULT_SYNCHRONOUS 1157 # define SQLITE_DEFAULT_SYNCHRONOUS 2 1158 #endif 1159 #ifndef SQLITE_DEFAULT_WAL_SYNCHRONOUS 1160 # define SQLITE_DEFAULT_WAL_SYNCHRONOUS SQLITE_DEFAULT_SYNCHRONOUS 1161 #endif 1162 1163 /* 1164 ** Each database file to be accessed by the system is an instance 1165 ** of the following structure. There are normally two of these structures 1166 ** in the sqlite.aDb[] array. aDb[0] is the main database file and 1167 ** aDb[1] is the database file used to hold temporary tables. Additional 1168 ** databases may be attached. 1169 */ 1170 struct Db { 1171 char *zDbSName; /* Name of this database. (schema name, not filename) */ 1172 Btree *pBt; /* The B*Tree structure for this database file */ 1173 u8 safety_level; /* How aggressive at syncing data to disk */ 1174 u8 bSyncSet; /* True if "PRAGMA synchronous=N" has been run */ 1175 Schema *pSchema; /* Pointer to database schema (possibly shared) */ 1176 }; 1177 1178 /* 1179 ** An instance of the following structure stores a database schema. 1180 ** 1181 ** Most Schema objects are associated with a Btree. The exception is 1182 ** the Schema for the TEMP databaes (sqlite3.aDb[1]) which is free-standing. 1183 ** In shared cache mode, a single Schema object can be shared by multiple 1184 ** Btrees that refer to the same underlying BtShared object. 1185 ** 1186 ** Schema objects are automatically deallocated when the last Btree that 1187 ** references them is destroyed. The TEMP Schema is manually freed by 1188 ** sqlite3_close(). 1189 * 1190 ** A thread must be holding a mutex on the corresponding Btree in order 1191 ** to access Schema content. This implies that the thread must also be 1192 ** holding a mutex on the sqlite3 connection pointer that owns the Btree. 1193 ** For a TEMP Schema, only the connection mutex is required. 1194 */ 1195 struct Schema { 1196 int schema_cookie; /* Database schema version number for this file */ 1197 int iGeneration; /* Generation counter. Incremented with each change */ 1198 Hash tblHash; /* All tables indexed by name */ 1199 Hash idxHash; /* All (named) indices indexed by name */ 1200 Hash trigHash; /* All triggers indexed by name */ 1201 Hash fkeyHash; /* All foreign keys by referenced table name */ 1202 Table *pSeqTab; /* The sqlite_sequence table used by AUTOINCREMENT */ 1203 u8 file_format; /* Schema format version for this file */ 1204 u8 enc; /* Text encoding used by this database */ 1205 u16 schemaFlags; /* Flags associated with this schema */ 1206 int cache_size; /* Number of pages to use in the cache */ 1207 }; 1208 1209 /* 1210 ** These macros can be used to test, set, or clear bits in the 1211 ** Db.pSchema->flags field. 1212 */ 1213 #define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))==(P)) 1214 #define DbHasAnyProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))!=0) 1215 #define DbSetProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags|=(P) 1216 #define DbClearProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags&=~(P) 1217 1218 /* 1219 ** Allowed values for the DB.pSchema->flags field. 1220 ** 1221 ** The DB_SchemaLoaded flag is set after the database schema has been 1222 ** read into internal hash tables. 1223 ** 1224 ** DB_UnresetViews means that one or more views have column names that 1225 ** have been filled out. If the schema changes, these column names might 1226 ** changes and so the view will need to be reset. 1227 */ 1228 #define DB_SchemaLoaded 0x0001 /* The schema has been loaded */ 1229 #define DB_UnresetViews 0x0002 /* Some views have defined column names */ 1230 #define DB_Empty 0x0004 /* The file is empty (length 0 bytes) */ 1231 #define DB_ResetWanted 0x0008 /* Reset the schema when nSchemaLock==0 */ 1232 1233 /* 1234 ** The number of different kinds of things that can be limited 1235 ** using the sqlite3_limit() interface. 1236 */ 1237 #define SQLITE_N_LIMIT (SQLITE_LIMIT_WORKER_THREADS+1) 1238 1239 /* 1240 ** Lookaside malloc is a set of fixed-size buffers that can be used 1241 ** to satisfy small transient memory allocation requests for objects 1242 ** associated with a particular database connection. The use of 1243 ** lookaside malloc provides a significant performance enhancement 1244 ** (approx 10%) by avoiding numerous malloc/free requests while parsing 1245 ** SQL statements. 1246 ** 1247 ** The Lookaside structure holds configuration information about the 1248 ** lookaside malloc subsystem. Each available memory allocation in 1249 ** the lookaside subsystem is stored on a linked list of LookasideSlot 1250 ** objects. 1251 ** 1252 ** Lookaside allocations are only allowed for objects that are associated 1253 ** with a particular database connection. Hence, schema information cannot 1254 ** be stored in lookaside because in shared cache mode the schema information 1255 ** is shared by multiple database connections. Therefore, while parsing 1256 ** schema information, the Lookaside.bEnabled flag is cleared so that 1257 ** lookaside allocations are not used to construct the schema objects. 1258 */ 1259 struct Lookaside { 1260 u32 bDisable; /* Only operate the lookaside when zero */ 1261 u16 sz; /* Size of each buffer in bytes */ 1262 u8 bMalloced; /* True if pStart obtained from sqlite3_malloc() */ 1263 u32 nSlot; /* Number of lookaside slots allocated */ 1264 u32 anStat[3]; /* 0: hits. 1: size misses. 2: full misses */ 1265 LookasideSlot *pInit; /* List of buffers not previously used */ 1266 LookasideSlot *pFree; /* List of available buffers */ 1267 void *pStart; /* First byte of available memory space */ 1268 void *pEnd; /* First byte past end of available space */ 1269 }; 1270 struct LookasideSlot { 1271 LookasideSlot *pNext; /* Next buffer in the list of free buffers */ 1272 }; 1273 1274 /* 1275 ** A hash table for built-in function definitions. (Application-defined 1276 ** functions use a regular table table from hash.h.) 1277 ** 1278 ** Hash each FuncDef structure into one of the FuncDefHash.a[] slots. 1279 ** Collisions are on the FuncDef.u.pHash chain. 1280 */ 1281 #define SQLITE_FUNC_HASH_SZ 23 1282 struct FuncDefHash { 1283 FuncDef *a[SQLITE_FUNC_HASH_SZ]; /* Hash table for functions */ 1284 }; 1285 1286 #ifdef SQLITE_USER_AUTHENTICATION 1287 /* 1288 ** Information held in the "sqlite3" database connection object and used 1289 ** to manage user authentication. 1290 */ 1291 typedef struct sqlite3_userauth sqlite3_userauth; 1292 struct sqlite3_userauth { 1293 u8 authLevel; /* Current authentication level */ 1294 int nAuthPW; /* Size of the zAuthPW in bytes */ 1295 char *zAuthPW; /* Password used to authenticate */ 1296 char *zAuthUser; /* User name used to authenticate */ 1297 }; 1298 1299 /* Allowed values for sqlite3_userauth.authLevel */ 1300 #define UAUTH_Unknown 0 /* Authentication not yet checked */ 1301 #define UAUTH_Fail 1 /* User authentication failed */ 1302 #define UAUTH_User 2 /* Authenticated as a normal user */ 1303 #define UAUTH_Admin 3 /* Authenticated as an administrator */ 1304 1305 /* Functions used only by user authorization logic */ 1306 int sqlite3UserAuthTable(const char*); 1307 int sqlite3UserAuthCheckLogin(sqlite3*,const char*,u8*); 1308 void sqlite3UserAuthInit(sqlite3*); 1309 void sqlite3CryptFunc(sqlite3_context*,int,sqlite3_value**); 1310 1311 #endif /* SQLITE_USER_AUTHENTICATION */ 1312 1313 /* 1314 ** typedef for the authorization callback function. 1315 */ 1316 #ifdef SQLITE_USER_AUTHENTICATION 1317 typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*, 1318 const char*, const char*); 1319 #else 1320 typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*, 1321 const char*); 1322 #endif 1323 1324 #ifndef SQLITE_OMIT_DEPRECATED 1325 /* This is an extra SQLITE_TRACE macro that indicates "legacy" tracing 1326 ** in the style of sqlite3_trace() 1327 */ 1328 #define SQLITE_TRACE_LEGACY 0x80 1329 #else 1330 #define SQLITE_TRACE_LEGACY 0 1331 #endif /* SQLITE_OMIT_DEPRECATED */ 1332 1333 1334 /* 1335 ** Each database connection is an instance of the following structure. 1336 */ 1337 struct sqlite3 { 1338 sqlite3_vfs *pVfs; /* OS Interface */ 1339 struct Vdbe *pVdbe; /* List of active virtual machines */ 1340 CollSeq *pDfltColl; /* The default collating sequence (BINARY) */ 1341 sqlite3_mutex *mutex; /* Connection mutex */ 1342 Db *aDb; /* All backends */ 1343 int nDb; /* Number of backends currently in use */ 1344 u32 mDbFlags; /* flags recording internal state */ 1345 u32 flags; /* flags settable by pragmas. See below */ 1346 i64 lastRowid; /* ROWID of most recent insert (see above) */ 1347 i64 szMmap; /* Default mmap_size setting */ 1348 u32 nSchemaLock; /* Do not reset the schema when non-zero */ 1349 unsigned int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */ 1350 int errCode; /* Most recent error code (SQLITE_*) */ 1351 int errMask; /* & result codes with this before returning */ 1352 int iSysErrno; /* Errno value from last system error */ 1353 u16 dbOptFlags; /* Flags to enable/disable optimizations */ 1354 u8 enc; /* Text encoding */ 1355 u8 autoCommit; /* The auto-commit flag. */ 1356 u8 temp_store; /* 1: file 2: memory 0: default */ 1357 u8 mallocFailed; /* True if we have seen a malloc failure */ 1358 u8 bBenignMalloc; /* Do not require OOMs if true */ 1359 u8 dfltLockMode; /* Default locking-mode for attached dbs */ 1360 signed char nextAutovac; /* Autovac setting after VACUUM if >=0 */ 1361 u8 suppressErr; /* Do not issue error messages if true */ 1362 u8 vtabOnConflict; /* Value to return for s3_vtab_on_conflict() */ 1363 u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */ 1364 u8 mTrace; /* zero or more SQLITE_TRACE flags */ 1365 u8 noSharedCache; /* True if no shared-cache backends */ 1366 u8 nSqlExec; /* Number of pending OP_SqlExec opcodes */ 1367 int nextPagesize; /* Pagesize after VACUUM if >0 */ 1368 u32 magic; /* Magic number for detect library misuse */ 1369 int nChange; /* Value returned by sqlite3_changes() */ 1370 int nTotalChange; /* Value returned by sqlite3_total_changes() */ 1371 int aLimit[SQLITE_N_LIMIT]; /* Limits */ 1372 int nMaxSorterMmap; /* Maximum size of regions mapped by sorter */ 1373 struct sqlite3InitInfo { /* Information used during initialization */ 1374 int newTnum; /* Rootpage of table being initialized */ 1375 u8 iDb; /* Which db file is being initialized */ 1376 u8 busy; /* TRUE if currently initializing */ 1377 unsigned orphanTrigger : 1; /* Last statement is orphaned TEMP trigger */ 1378 unsigned imposterTable : 1; /* Building an imposter table */ 1379 unsigned reopenMemdb : 1; /* ATTACH is really a reopen using MemDB */ 1380 } init; 1381 int nVdbeActive; /* Number of VDBEs currently running */ 1382 int nVdbeRead; /* Number of active VDBEs that read or write */ 1383 int nVdbeWrite; /* Number of active VDBEs that read and write */ 1384 int nVdbeExec; /* Number of nested calls to VdbeExec() */ 1385 int nVDestroy; /* Number of active OP_VDestroy operations */ 1386 int nExtension; /* Number of loaded extensions */ 1387 void **aExtension; /* Array of shared library handles */ 1388 int (*xTrace)(u32,void*,void*,void*); /* Trace function */ 1389 void *pTraceArg; /* Argument to the trace function */ 1390 void (*xProfile)(void*,const char*,u64); /* Profiling function */ 1391 void *pProfileArg; /* Argument to profile function */ 1392 void *pCommitArg; /* Argument to xCommitCallback() */ 1393 int (*xCommitCallback)(void*); /* Invoked at every commit. */ 1394 void *pRollbackArg; /* Argument to xRollbackCallback() */ 1395 void (*xRollbackCallback)(void*); /* Invoked at every commit. */ 1396 void *pUpdateArg; 1397 void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64); 1398 #ifdef SQLITE_ENABLE_PREUPDATE_HOOK 1399 void *pPreUpdateArg; /* First argument to xPreUpdateCallback */ 1400 void (*xPreUpdateCallback)( /* Registered using sqlite3_preupdate_hook() */ 1401 void*,sqlite3*,int,char const*,char const*,sqlite3_int64,sqlite3_int64 1402 ); 1403 PreUpdate *pPreUpdate; /* Context for active pre-update callback */ 1404 #endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ 1405 #ifndef SQLITE_OMIT_WAL 1406 int (*xWalCallback)(void *, sqlite3 *, const char *, int); 1407 void *pWalArg; 1408 #endif 1409 void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*); 1410 void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*); 1411 void *pCollNeededArg; 1412 sqlite3_value *pErr; /* Most recent error message */ 1413 union { 1414 volatile int isInterrupted; /* True if sqlite3_interrupt has been called */ 1415 double notUsed1; /* Spacer */ 1416 } u1; 1417 Lookaside lookaside; /* Lookaside malloc configuration */ 1418 #ifndef SQLITE_OMIT_AUTHORIZATION 1419 sqlite3_xauth xAuth; /* Access authorization function */ 1420 void *pAuthArg; /* 1st argument to the access auth function */ 1421 #endif 1422 #ifndef SQLITE_OMIT_PROGRESS_CALLBACK 1423 int (*xProgress)(void *); /* The progress callback */ 1424 void *pProgressArg; /* Argument to the progress callback */ 1425 unsigned nProgressOps; /* Number of opcodes for progress callback */ 1426 #endif 1427 #ifndef SQLITE_OMIT_VIRTUALTABLE 1428 int nVTrans; /* Allocated size of aVTrans */ 1429 Hash aModule; /* populated by sqlite3_create_module() */ 1430 VtabCtx *pVtabCtx; /* Context for active vtab connect/create */ 1431 VTable **aVTrans; /* Virtual tables with open transactions */ 1432 VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */ 1433 #endif 1434 Hash aFunc; /* Hash table of connection functions */ 1435 Hash aCollSeq; /* All collating sequences */ 1436 BusyHandler busyHandler; /* Busy callback */ 1437 Db aDbStatic[2]; /* Static space for the 2 default backends */ 1438 Savepoint *pSavepoint; /* List of active savepoints */ 1439 int busyTimeout; /* Busy handler timeout, in msec */ 1440 int nSavepoint; /* Number of non-transaction savepoints */ 1441 int nStatement; /* Number of nested statement-transactions */ 1442 i64 nDeferredCons; /* Net deferred constraints this transaction. */ 1443 i64 nDeferredImmCons; /* Net deferred immediate constraints */ 1444 int *pnBytesFreed; /* If not NULL, increment this in DbFree() */ 1445 #ifdef SQLITE_ENABLE_UNLOCK_NOTIFY 1446 /* The following variables are all protected by the STATIC_MASTER 1447 ** mutex, not by sqlite3.mutex. They are used by code in notify.c. 1448 ** 1449 ** When X.pUnlockConnection==Y, that means that X is waiting for Y to 1450 ** unlock so that it can proceed. 1451 ** 1452 ** When X.pBlockingConnection==Y, that means that something that X tried 1453 ** tried to do recently failed with an SQLITE_LOCKED error due to locks 1454 ** held by Y. 1455 */ 1456 sqlite3 *pBlockingConnection; /* Connection that caused SQLITE_LOCKED */ 1457 sqlite3 *pUnlockConnection; /* Connection to watch for unlock */ 1458 void *pUnlockArg; /* Argument to xUnlockNotify */ 1459 void (*xUnlockNotify)(void **, int); /* Unlock notify callback */ 1460 sqlite3 *pNextBlocked; /* Next in list of all blocked connections */ 1461 #endif 1462 #ifdef SQLITE_USER_AUTHENTICATION 1463 sqlite3_userauth auth; /* User authentication information */ 1464 #endif 1465 }; 1466 1467 /* 1468 ** A macro to discover the encoding of a database. 1469 */ 1470 #define SCHEMA_ENC(db) ((db)->aDb[0].pSchema->enc) 1471 #define ENC(db) ((db)->enc) 1472 1473 /* 1474 ** Possible values for the sqlite3.flags. 1475 ** 1476 ** Value constraints (enforced via assert()): 1477 ** SQLITE_FullFSync == PAGER_FULLFSYNC 1478 ** SQLITE_CkptFullFSync == PAGER_CKPT_FULLFSYNC 1479 ** SQLITE_CacheSpill == PAGER_CACHE_SPILL 1480 */ 1481 #define SQLITE_WriteSchema 0x00000001 /* OK to update SQLITE_MASTER */ 1482 #define SQLITE_LegacyFileFmt 0x00000002 /* Create new databases in format 1 */ 1483 #define SQLITE_FullColNames 0x00000004 /* Show full column names on SELECT */ 1484 #define SQLITE_FullFSync 0x00000008 /* Use full fsync on the backend */ 1485 #define SQLITE_CkptFullFSync 0x00000010 /* Use full fsync for checkpoint */ 1486 #define SQLITE_CacheSpill 0x00000020 /* OK to spill pager cache */ 1487 #define SQLITE_ShortColNames 0x00000040 /* Show short columns names */ 1488 #define SQLITE_CountRows 0x00000080 /* Count rows changed by INSERT, */ 1489 /* DELETE, or UPDATE and return */ 1490 /* the count using a callback. */ 1491 #define SQLITE_NullCallback 0x00000100 /* Invoke the callback once if the */ 1492 /* result set is empty */ 1493 #define SQLITE_IgnoreChecks 0x00000200 /* Do not enforce check constraints */ 1494 #define SQLITE_ReadUncommit 0x00000400 /* READ UNCOMMITTED in shared-cache */ 1495 #define SQLITE_NoCkptOnClose 0x00000800 /* No checkpoint on close()/DETACH */ 1496 #define SQLITE_ReverseOrder 0x00001000 /* Reverse unordered SELECTs */ 1497 #define SQLITE_RecTriggers 0x00002000 /* Enable recursive triggers */ 1498 #define SQLITE_ForeignKeys 0x00004000 /* Enforce foreign key constraints */ 1499 #define SQLITE_AutoIndex 0x00008000 /* Enable automatic indexes */ 1500 #define SQLITE_LoadExtension 0x00010000 /* Enable load_extension */ 1501 #define SQLITE_LoadExtFunc 0x00020000 /* Enable load_extension() SQL func */ 1502 #define SQLITE_EnableTrigger 0x00040000 /* True to enable triggers */ 1503 #define SQLITE_DeferFKs 0x00080000 /* Defer all FK constraints */ 1504 #define SQLITE_QueryOnly 0x00100000 /* Disable database changes */ 1505 #define SQLITE_CellSizeCk 0x00200000 /* Check btree cell sizes on load */ 1506 #define SQLITE_Fts3Tokenizer 0x00400000 /* Enable fts3_tokenizer(2) */ 1507 #define SQLITE_EnableQPSG 0x00800000 /* Query Planner Stability Guarantee*/ 1508 #define SQLITE_TriggerEQP 0x01000000 /* Show trigger EXPLAIN QUERY PLAN */ 1509 #define SQLITE_ResetDatabase 0x02000000 /* Reset the database */ 1510 1511 /* Flags used only if debugging */ 1512 #ifdef SQLITE_DEBUG 1513 #define SQLITE_SqlTrace 0x08000000 /* Debug print SQL as it executes */ 1514 #define SQLITE_VdbeListing 0x10000000 /* Debug listings of VDBE programs */ 1515 #define SQLITE_VdbeTrace 0x20000000 /* True to trace VDBE execution */ 1516 #define SQLITE_VdbeAddopTrace 0x40000000 /* Trace sqlite3VdbeAddOp() calls */ 1517 #define SQLITE_VdbeEQP 0x80000000 /* Debug EXPLAIN QUERY PLAN */ 1518 #endif 1519 1520 /* 1521 ** Allowed values for sqlite3.mDbFlags 1522 */ 1523 #define DBFLAG_SchemaChange 0x0001 /* Uncommitted Hash table changes */ 1524 #define DBFLAG_PreferBuiltin 0x0002 /* Preference to built-in funcs */ 1525 #define DBFLAG_Vacuum 0x0004 /* Currently in a VACUUM */ 1526 #define DBFLAG_SchemaKnownOk 0x0008 /* Schema is known to be valid */ 1527 1528 /* 1529 ** Bits of the sqlite3.dbOptFlags field that are used by the 1530 ** sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS,...) interface to 1531 ** selectively disable various optimizations. 1532 */ 1533 #define SQLITE_QueryFlattener 0x0001 /* Query flattening */ 1534 #define SQLITE_ColumnCache 0x0002 /* Column cache */ 1535 #define SQLITE_GroupByOrder 0x0004 /* GROUPBY cover of ORDERBY */ 1536 #define SQLITE_FactorOutConst 0x0008 /* Constant factoring */ 1537 #define SQLITE_DistinctOpt 0x0010 /* DISTINCT using indexes */ 1538 #define SQLITE_CoverIdxScan 0x0020 /* Covering index scans */ 1539 #define SQLITE_OrderByIdxJoin 0x0040 /* ORDER BY of joins via index */ 1540 #define SQLITE_Transitive 0x0080 /* Transitive constraints */ 1541 #define SQLITE_OmitNoopJoin 0x0100 /* Omit unused tables in joins */ 1542 #define SQLITE_CountOfView 0x0200 /* The count-of-view optimization */ 1543 #define SQLITE_CursorHints 0x0400 /* Add OP_CursorHint opcodes */ 1544 #define SQLITE_Stat34 0x0800 /* Use STAT3 or STAT4 data */ 1545 /* TH3 expects the Stat34 ^^^^^^ value to be 0x0800. Don't change it */ 1546 #define SQLITE_PushDown 0x1000 /* The push-down optimization */ 1547 #define SQLITE_SimplifyJoin 0x2000 /* Convert LEFT JOIN to JOIN */ 1548 #define SQLITE_AllOpts 0xffff /* All optimizations */ 1549 1550 /* 1551 ** Macros for testing whether or not optimizations are enabled or disabled. 1552 */ 1553 #define OptimizationDisabled(db, mask) (((db)->dbOptFlags&(mask))!=0) 1554 #define OptimizationEnabled(db, mask) (((db)->dbOptFlags&(mask))==0) 1555 1556 /* 1557 ** Return true if it OK to factor constant expressions into the initialization 1558 ** code. The argument is a Parse object for the code generator. 1559 */ 1560 #define ConstFactorOk(P) ((P)->okConstFactor) 1561 1562 /* 1563 ** Possible values for the sqlite.magic field. 1564 ** The numbers are obtained at random and have no special meaning, other 1565 ** than being distinct from one another. 1566 */ 1567 #define SQLITE_MAGIC_OPEN 0xa029a697 /* Database is open */ 1568 #define SQLITE_MAGIC_CLOSED 0x9f3c2d33 /* Database is closed */ 1569 #define SQLITE_MAGIC_SICK 0x4b771290 /* Error and awaiting close */ 1570 #define SQLITE_MAGIC_BUSY 0xf03b7906 /* Database currently in use */ 1571 #define SQLITE_MAGIC_ERROR 0xb5357930 /* An SQLITE_MISUSE error occurred */ 1572 #define SQLITE_MAGIC_ZOMBIE 0x64cffc7f /* Close with last statement close */ 1573 1574 /* 1575 ** Each SQL function is defined by an instance of the following 1576 ** structure. For global built-in functions (ex: substr(), max(), count()) 1577 ** a pointer to this structure is held in the sqlite3BuiltinFunctions object. 1578 ** For per-connection application-defined functions, a pointer to this 1579 ** structure is held in the db->aHash hash table. 1580 ** 1581 ** The u.pHash field is used by the global built-ins. The u.pDestructor 1582 ** field is used by per-connection app-def functions. 1583 */ 1584 struct FuncDef { 1585 i8 nArg; /* Number of arguments. -1 means unlimited */ 1586 u16 funcFlags; /* Some combination of SQLITE_FUNC_* */ 1587 void *pUserData; /* User data parameter */ 1588 FuncDef *pNext; /* Next function with same name */ 1589 void (*xSFunc)(sqlite3_context*,int,sqlite3_value**); /* func or agg-step */ 1590 void (*xFinalize)(sqlite3_context*); /* Agg finalizer */ 1591 const char *zName; /* SQL name of the function. */ 1592 union { 1593 FuncDef *pHash; /* Next with a different name but the same hash */ 1594 FuncDestructor *pDestructor; /* Reference counted destructor function */ 1595 } u; 1596 }; 1597 1598 /* 1599 ** This structure encapsulates a user-function destructor callback (as 1600 ** configured using create_function_v2()) and a reference counter. When 1601 ** create_function_v2() is called to create a function with a destructor, 1602 ** a single object of this type is allocated. FuncDestructor.nRef is set to 1603 ** the number of FuncDef objects created (either 1 or 3, depending on whether 1604 ** or not the specified encoding is SQLITE_ANY). The FuncDef.pDestructor 1605 ** member of each of the new FuncDef objects is set to point to the allocated 1606 ** FuncDestructor. 1607 ** 1608 ** Thereafter, when one of the FuncDef objects is deleted, the reference 1609 ** count on this object is decremented. When it reaches 0, the destructor 1610 ** is invoked and the FuncDestructor structure freed. 1611 */ 1612 struct FuncDestructor { 1613 int nRef; 1614 void (*xDestroy)(void *); 1615 void *pUserData; 1616 }; 1617 1618 /* 1619 ** Possible values for FuncDef.flags. Note that the _LENGTH and _TYPEOF 1620 ** values must correspond to OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG. And 1621 ** SQLITE_FUNC_CONSTANT must be the same as SQLITE_DETERMINISTIC. There 1622 ** are assert() statements in the code to verify this. 1623 ** 1624 ** Value constraints (enforced via assert()): 1625 ** SQLITE_FUNC_MINMAX == NC_MinMaxAgg == SF_MinMaxAgg 1626 ** SQLITE_FUNC_LENGTH == OPFLAG_LENGTHARG 1627 ** SQLITE_FUNC_TYPEOF == OPFLAG_TYPEOFARG 1628 ** SQLITE_FUNC_CONSTANT == SQLITE_DETERMINISTIC from the API 1629 ** SQLITE_FUNC_ENCMASK depends on SQLITE_UTF* macros in the API 1630 */ 1631 #define SQLITE_FUNC_ENCMASK 0x0003 /* SQLITE_UTF8, SQLITE_UTF16BE or UTF16LE */ 1632 #define SQLITE_FUNC_LIKE 0x0004 /* Candidate for the LIKE optimization */ 1633 #define SQLITE_FUNC_CASE 0x0008 /* Case-sensitive LIKE-type function */ 1634 #define SQLITE_FUNC_EPHEM 0x0010 /* Ephemeral. Delete with VDBE */ 1635 #define SQLITE_FUNC_NEEDCOLL 0x0020 /* sqlite3GetFuncCollSeq() might be called*/ 1636 #define SQLITE_FUNC_LENGTH 0x0040 /* Built-in length() function */ 1637 #define SQLITE_FUNC_TYPEOF 0x0080 /* Built-in typeof() function */ 1638 #define SQLITE_FUNC_COUNT 0x0100 /* Built-in count(*) aggregate */ 1639 #define SQLITE_FUNC_COALESCE 0x0200 /* Built-in coalesce() or ifnull() */ 1640 #define SQLITE_FUNC_UNLIKELY 0x0400 /* Built-in unlikely() function */ 1641 #define SQLITE_FUNC_CONSTANT 0x0800 /* Constant inputs give a constant output */ 1642 #define SQLITE_FUNC_MINMAX 0x1000 /* True for min() and max() aggregates */ 1643 #define SQLITE_FUNC_SLOCHNG 0x2000 /* "Slow Change". Value constant during a 1644 ** single query - might change over time */ 1645 #define SQLITE_FUNC_AFFINITY 0x4000 /* Built-in affinity() function */ 1646 #define SQLITE_FUNC_OFFSET 0x8000 /* Built-in sqlite_offset() function */ 1647 1648 /* 1649 ** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are 1650 ** used to create the initializers for the FuncDef structures. 1651 ** 1652 ** FUNCTION(zName, nArg, iArg, bNC, xFunc) 1653 ** Used to create a scalar function definition of a function zName 1654 ** implemented by C function xFunc that accepts nArg arguments. The 1655 ** value passed as iArg is cast to a (void*) and made available 1656 ** as the user-data (sqlite3_user_data()) for the function. If 1657 ** argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set. 1658 ** 1659 ** VFUNCTION(zName, nArg, iArg, bNC, xFunc) 1660 ** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag. 1661 ** 1662 ** DFUNCTION(zName, nArg, iArg, bNC, xFunc) 1663 ** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag and 1664 ** adds the SQLITE_FUNC_SLOCHNG flag. Used for date & time functions 1665 ** and functions like sqlite_version() that can change, but not during 1666 ** a single query. The iArg is ignored. The user-data is always set 1667 ** to a NULL pointer. The bNC parameter is not used. 1668 ** 1669 ** PURE_DATE(zName, nArg, iArg, bNC, xFunc) 1670 ** Used for "pure" date/time functions, this macro is like DFUNCTION 1671 ** except that it does set the SQLITE_FUNC_CONSTANT flags. iArg is 1672 ** ignored and the user-data for these functions is set to an 1673 ** arbitrary non-NULL pointer. The bNC parameter is not used. 1674 ** 1675 ** AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal) 1676 ** Used to create an aggregate function definition implemented by 1677 ** the C functions xStep and xFinal. The first four parameters 1678 ** are interpreted in the same way as the first 4 parameters to 1679 ** FUNCTION(). 1680 ** 1681 ** LIKEFUNC(zName, nArg, pArg, flags) 1682 ** Used to create a scalar function definition of a function zName 1683 ** that accepts nArg arguments and is implemented by a call to C 1684 ** function likeFunc. Argument pArg is cast to a (void *) and made 1685 ** available as the function user-data (sqlite3_user_data()). The 1686 ** FuncDef.flags variable is set to the value passed as the flags 1687 ** parameter. 1688 */ 1689 #define FUNCTION(zName, nArg, iArg, bNC, xFunc) \ 1690 {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ 1691 SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} } 1692 #define VFUNCTION(zName, nArg, iArg, bNC, xFunc) \ 1693 {nArg, SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ 1694 SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} } 1695 #define DFUNCTION(zName, nArg, iArg, bNC, xFunc) \ 1696 {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8, \ 1697 0, 0, xFunc, 0, #zName, {0} } 1698 #define PURE_DATE(zName, nArg, iArg, bNC, xFunc) \ 1699 {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|SQLITE_FUNC_CONSTANT, \ 1700 (void*)&sqlite3Config, 0, xFunc, 0, #zName, {0} } 1701 #define FUNCTION2(zName, nArg, iArg, bNC, xFunc, extraFlags) \ 1702 {nArg,SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags,\ 1703 SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} } 1704 #define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \ 1705 {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ 1706 pArg, 0, xFunc, 0, #zName, } 1707 #define LIKEFUNC(zName, nArg, arg, flags) \ 1708 {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|flags, \ 1709 (void *)arg, 0, likeFunc, 0, #zName, {0} } 1710 #define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \ 1711 {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL), \ 1712 SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}} 1713 #define AGGREGATE2(zName, nArg, arg, nc, xStep, xFinal, extraFlags) \ 1714 {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|extraFlags, \ 1715 SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}} 1716 1717 /* 1718 ** All current savepoints are stored in a linked list starting at 1719 ** sqlite3.pSavepoint. The first element in the list is the most recently 1720 ** opened savepoint. Savepoints are added to the list by the vdbe 1721 ** OP_Savepoint instruction. 1722 */ 1723 struct Savepoint { 1724 char *zName; /* Savepoint name (nul-terminated) */ 1725 i64 nDeferredCons; /* Number of deferred fk violations */ 1726 i64 nDeferredImmCons; /* Number of deferred imm fk. */ 1727 Savepoint *pNext; /* Parent savepoint (if any) */ 1728 }; 1729 1730 /* 1731 ** The following are used as the second parameter to sqlite3Savepoint(), 1732 ** and as the P1 argument to the OP_Savepoint instruction. 1733 */ 1734 #define SAVEPOINT_BEGIN 0 1735 #define SAVEPOINT_RELEASE 1 1736 #define SAVEPOINT_ROLLBACK 2 1737 1738 1739 /* 1740 ** Each SQLite module (virtual table definition) is defined by an 1741 ** instance of the following structure, stored in the sqlite3.aModule 1742 ** hash table. 1743 */ 1744 struct Module { 1745 const sqlite3_module *pModule; /* Callback pointers */ 1746 const char *zName; /* Name passed to create_module() */ 1747 void *pAux; /* pAux passed to create_module() */ 1748 void (*xDestroy)(void *); /* Module destructor function */ 1749 Table *pEpoTab; /* Eponymous table for this module */ 1750 }; 1751 1752 /* 1753 ** information about each column of an SQL table is held in an instance 1754 ** of this structure. 1755 */ 1756 struct Column { 1757 char *zName; /* Name of this column, \000, then the type */ 1758 Expr *pDflt; /* Default value of this column */ 1759 char *zColl; /* Collating sequence. If NULL, use the default */ 1760 u8 notNull; /* An OE_ code for handling a NOT NULL constraint */ 1761 char affinity; /* One of the SQLITE_AFF_... values */ 1762 u8 szEst; /* Estimated size of value in this column. sizeof(INT)==1 */ 1763 u8 colFlags; /* Boolean properties. See COLFLAG_ defines below */ 1764 }; 1765 1766 /* Allowed values for Column.colFlags: 1767 */ 1768 #define COLFLAG_PRIMKEY 0x0001 /* Column is part of the primary key */ 1769 #define COLFLAG_HIDDEN 0x0002 /* A hidden column in a virtual table */ 1770 #define COLFLAG_HASTYPE 0x0004 /* Type name follows column name */ 1771 #define COLFLAG_UNIQUE 0x0008 /* Column def contains "UNIQUE" or "PK" */ 1772 #define COLFLAG_SORTERREF 0x0010 /* Use sorter-refs with this column */ 1773 1774 /* 1775 ** A "Collating Sequence" is defined by an instance of the following 1776 ** structure. Conceptually, a collating sequence consists of a name and 1777 ** a comparison routine that defines the order of that sequence. 1778 ** 1779 ** If CollSeq.xCmp is NULL, it means that the 1780 ** collating sequence is undefined. Indices built on an undefined 1781 ** collating sequence may not be read or written. 1782 */ 1783 struct CollSeq { 1784 char *zName; /* Name of the collating sequence, UTF-8 encoded */ 1785 u8 enc; /* Text encoding handled by xCmp() */ 1786 void *pUser; /* First argument to xCmp() */ 1787 int (*xCmp)(void*,int, const void*, int, const void*); 1788 void (*xDel)(void*); /* Destructor for pUser */ 1789 }; 1790 1791 /* 1792 ** A sort order can be either ASC or DESC. 1793 */ 1794 #define SQLITE_SO_ASC 0 /* Sort in ascending order */ 1795 #define SQLITE_SO_DESC 1 /* Sort in ascending order */ 1796 #define SQLITE_SO_UNDEFINED -1 /* No sort order specified */ 1797 1798 /* 1799 ** Column affinity types. 1800 ** 1801 ** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and 1802 ** 't' for SQLITE_AFF_TEXT. But we can save a little space and improve 1803 ** the speed a little by numbering the values consecutively. 1804 ** 1805 ** But rather than start with 0 or 1, we begin with 'A'. That way, 1806 ** when multiple affinity types are concatenated into a string and 1807 ** used as the P4 operand, they will be more readable. 1808 ** 1809 ** Note also that the numeric types are grouped together so that testing 1810 ** for a numeric type is a single comparison. And the BLOB type is first. 1811 */ 1812 #define SQLITE_AFF_BLOB 'A' 1813 #define SQLITE_AFF_TEXT 'B' 1814 #define SQLITE_AFF_NUMERIC 'C' 1815 #define SQLITE_AFF_INTEGER 'D' 1816 #define SQLITE_AFF_REAL 'E' 1817 1818 #define sqlite3IsNumericAffinity(X) ((X)>=SQLITE_AFF_NUMERIC) 1819 1820 /* 1821 ** The SQLITE_AFF_MASK values masks off the significant bits of an 1822 ** affinity value. 1823 */ 1824 #define SQLITE_AFF_MASK 0x47 1825 1826 /* 1827 ** Additional bit values that can be ORed with an affinity without 1828 ** changing the affinity. 1829 ** 1830 ** The SQLITE_NOTNULL flag is a combination of NULLEQ and JUMPIFNULL. 1831 ** It causes an assert() to fire if either operand to a comparison 1832 ** operator is NULL. It is added to certain comparison operators to 1833 ** prove that the operands are always NOT NULL. 1834 */ 1835 #define SQLITE_KEEPNULL 0x08 /* Used by vector == or <> */ 1836 #define SQLITE_JUMPIFNULL 0x10 /* jumps if either operand is NULL */ 1837 #define SQLITE_STOREP2 0x20 /* Store result in reg[P2] rather than jump */ 1838 #define SQLITE_NULLEQ 0x80 /* NULL=NULL */ 1839 #define SQLITE_NOTNULL 0x90 /* Assert that operands are never NULL */ 1840 1841 /* 1842 ** An object of this type is created for each virtual table present in 1843 ** the database schema. 1844 ** 1845 ** If the database schema is shared, then there is one instance of this 1846 ** structure for each database connection (sqlite3*) that uses the shared 1847 ** schema. This is because each database connection requires its own unique 1848 ** instance of the sqlite3_vtab* handle used to access the virtual table 1849 ** implementation. sqlite3_vtab* handles can not be shared between 1850 ** database connections, even when the rest of the in-memory database 1851 ** schema is shared, as the implementation often stores the database 1852 ** connection handle passed to it via the xConnect() or xCreate() method 1853 ** during initialization internally. This database connection handle may 1854 ** then be used by the virtual table implementation to access real tables 1855 ** within the database. So that they appear as part of the callers 1856 ** transaction, these accesses need to be made via the same database 1857 ** connection as that used to execute SQL operations on the virtual table. 1858 ** 1859 ** All VTable objects that correspond to a single table in a shared 1860 ** database schema are initially stored in a linked-list pointed to by 1861 ** the Table.pVTable member variable of the corresponding Table object. 1862 ** When an sqlite3_prepare() operation is required to access the virtual 1863 ** table, it searches the list for the VTable that corresponds to the 1864 ** database connection doing the preparing so as to use the correct 1865 ** sqlite3_vtab* handle in the compiled query. 1866 ** 1867 ** When an in-memory Table object is deleted (for example when the 1868 ** schema is being reloaded for some reason), the VTable objects are not 1869 ** deleted and the sqlite3_vtab* handles are not xDisconnect()ed 1870 ** immediately. Instead, they are moved from the Table.pVTable list to 1871 ** another linked list headed by the sqlite3.pDisconnect member of the 1872 ** corresponding sqlite3 structure. They are then deleted/xDisconnected 1873 ** next time a statement is prepared using said sqlite3*. This is done 1874 ** to avoid deadlock issues involving multiple sqlite3.mutex mutexes. 1875 ** Refer to comments above function sqlite3VtabUnlockList() for an 1876 ** explanation as to why it is safe to add an entry to an sqlite3.pDisconnect 1877 ** list without holding the corresponding sqlite3.mutex mutex. 1878 ** 1879 ** The memory for objects of this type is always allocated by 1880 ** sqlite3DbMalloc(), using the connection handle stored in VTable.db as 1881 ** the first argument. 1882 */ 1883 struct VTable { 1884 sqlite3 *db; /* Database connection associated with this table */ 1885 Module *pMod; /* Pointer to module implementation */ 1886 sqlite3_vtab *pVtab; /* Pointer to vtab instance */ 1887 int nRef; /* Number of pointers to this structure */ 1888 u8 bConstraint; /* True if constraints are supported */ 1889 int iSavepoint; /* Depth of the SAVEPOINT stack */ 1890 VTable *pNext; /* Next in linked list (see above) */ 1891 }; 1892 1893 /* 1894 ** The schema for each SQL table and view is represented in memory 1895 ** by an instance of the following structure. 1896 */ 1897 struct Table { 1898 char *zName; /* Name of the table or view */ 1899 Column *aCol; /* Information about each column */ 1900 Index *pIndex; /* List of SQL indexes on this table. */ 1901 Select *pSelect; /* NULL for tables. Points to definition if a view. */ 1902 FKey *pFKey; /* Linked list of all foreign keys in this table */ 1903 char *zColAff; /* String defining the affinity of each column */ 1904 ExprList *pCheck; /* All CHECK constraints */ 1905 /* ... also used as column name list in a VIEW */ 1906 int tnum; /* Root BTree page for this table */ 1907 u32 nTabRef; /* Number of pointers to this Table */ 1908 u32 tabFlags; /* Mask of TF_* values */ 1909 i16 iPKey; /* If not negative, use aCol[iPKey] as the rowid */ 1910 i16 nCol; /* Number of columns in this table */ 1911 LogEst nRowLogEst; /* Estimated rows in table - from sqlite_stat1 table */ 1912 LogEst szTabRow; /* Estimated size of each table row in bytes */ 1913 #ifdef SQLITE_ENABLE_COSTMULT 1914 LogEst costMult; /* Cost multiplier for using this table */ 1915 #endif 1916 u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */ 1917 #ifndef SQLITE_OMIT_ALTERTABLE 1918 int addColOffset; /* Offset in CREATE TABLE stmt to add a new column */ 1919 #endif 1920 #ifndef SQLITE_OMIT_VIRTUALTABLE 1921 int nModuleArg; /* Number of arguments to the module */ 1922 char **azModuleArg; /* 0: module 1: schema 2: vtab name 3...: args */ 1923 VTable *pVTable; /* List of VTable objects. */ 1924 #endif 1925 Trigger *pTrigger; /* List of triggers stored in pSchema */ 1926 Schema *pSchema; /* Schema that contains this table */ 1927 Table *pNextZombie; /* Next on the Parse.pZombieTab list */ 1928 }; 1929 1930 /* 1931 ** Allowed values for Table.tabFlags. 1932 ** 1933 ** TF_OOOHidden applies to tables or view that have hidden columns that are 1934 ** followed by non-hidden columns. Example: "CREATE VIRTUAL TABLE x USING 1935 ** vtab1(a HIDDEN, b);". Since "b" is a non-hidden column but "a" is hidden, 1936 ** the TF_OOOHidden attribute would apply in this case. Such tables require 1937 ** special handling during INSERT processing. 1938 */ 1939 #define TF_Readonly 0x0001 /* Read-only system table */ 1940 #define TF_Ephemeral 0x0002 /* An ephemeral table */ 1941 #define TF_HasPrimaryKey 0x0004 /* Table has a primary key */ 1942 #define TF_Autoincrement 0x0008 /* Integer primary key is autoincrement */ 1943 #define TF_HasStat1 0x0010 /* nRowLogEst set from sqlite_stat1 */ 1944 #define TF_WithoutRowid 0x0020 /* No rowid. PRIMARY KEY is the key */ 1945 #define TF_NoVisibleRowid 0x0040 /* No user-visible "rowid" column */ 1946 #define TF_OOOHidden 0x0080 /* Out-of-Order hidden columns */ 1947 #define TF_StatsUsed 0x0100 /* Query planner decisions affected by 1948 ** Index.aiRowLogEst[] values */ 1949 #define TF_HasNotNull 0x0200 /* Contains NOT NULL constraints */ 1950 1951 /* 1952 ** Test to see whether or not a table is a virtual table. This is 1953 ** done as a macro so that it will be optimized out when virtual 1954 ** table support is omitted from the build. 1955 */ 1956 #ifndef SQLITE_OMIT_VIRTUALTABLE 1957 # define IsVirtual(X) ((X)->nModuleArg) 1958 #else 1959 # define IsVirtual(X) 0 1960 #endif 1961 1962 /* 1963 ** Macros to determine if a column is hidden. IsOrdinaryHiddenColumn() 1964 ** only works for non-virtual tables (ordinary tables and views) and is 1965 ** always false unless SQLITE_ENABLE_HIDDEN_COLUMNS is defined. The 1966 ** IsHiddenColumn() macro is general purpose. 1967 */ 1968 #if defined(SQLITE_ENABLE_HIDDEN_COLUMNS) 1969 # define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0) 1970 # define IsOrdinaryHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0) 1971 #elif !defined(SQLITE_OMIT_VIRTUALTABLE) 1972 # define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0) 1973 # define IsOrdinaryHiddenColumn(X) 0 1974 #else 1975 # define IsHiddenColumn(X) 0 1976 # define IsOrdinaryHiddenColumn(X) 0 1977 #endif 1978 1979 1980 /* Does the table have a rowid */ 1981 #define HasRowid(X) (((X)->tabFlags & TF_WithoutRowid)==0) 1982 #define VisibleRowid(X) (((X)->tabFlags & TF_NoVisibleRowid)==0) 1983 1984 /* 1985 ** Each foreign key constraint is an instance of the following structure. 1986 ** 1987 ** A foreign key is associated with two tables. The "from" table is 1988 ** the table that contains the REFERENCES clause that creates the foreign 1989 ** key. The "to" table is the table that is named in the REFERENCES clause. 1990 ** Consider this example: 1991 ** 1992 ** CREATE TABLE ex1( 1993 ** a INTEGER PRIMARY KEY, 1994 ** b INTEGER CONSTRAINT fk1 REFERENCES ex2(x) 1995 ** ); 1996 ** 1997 ** For foreign key "fk1", the from-table is "ex1" and the to-table is "ex2". 1998 ** Equivalent names: 1999 ** 2000 ** from-table == child-table 2001 ** to-table == parent-table 2002 ** 2003 ** Each REFERENCES clause generates an instance of the following structure 2004 ** which is attached to the from-table. The to-table need not exist when 2005 ** the from-table is created. The existence of the to-table is not checked. 2006 ** 2007 ** The list of all parents for child Table X is held at X.pFKey. 2008 ** 2009 ** A list of all children for a table named Z (which might not even exist) 2010 ** is held in Schema.fkeyHash with a hash key of Z. 2011 */ 2012 struct FKey { 2013 Table *pFrom; /* Table containing the REFERENCES clause (aka: Child) */ 2014 FKey *pNextFrom; /* Next FKey with the same in pFrom. Next parent of pFrom */ 2015 char *zTo; /* Name of table that the key points to (aka: Parent) */ 2016 FKey *pNextTo; /* Next with the same zTo. Next child of zTo. */ 2017 FKey *pPrevTo; /* Previous with the same zTo */ 2018 int nCol; /* Number of columns in this key */ 2019 /* EV: R-30323-21917 */ 2020 u8 isDeferred; /* True if constraint checking is deferred till COMMIT */ 2021 u8 aAction[2]; /* ON DELETE and ON UPDATE actions, respectively */ 2022 Trigger *apTrigger[2];/* Triggers for aAction[] actions */ 2023 struct sColMap { /* Mapping of columns in pFrom to columns in zTo */ 2024 int iFrom; /* Index of column in pFrom */ 2025 char *zCol; /* Name of column in zTo. If NULL use PRIMARY KEY */ 2026 } aCol[1]; /* One entry for each of nCol columns */ 2027 }; 2028 2029 /* 2030 ** SQLite supports many different ways to resolve a constraint 2031 ** error. ROLLBACK processing means that a constraint violation 2032 ** causes the operation in process to fail and for the current transaction 2033 ** to be rolled back. ABORT processing means the operation in process 2034 ** fails and any prior changes from that one operation are backed out, 2035 ** but the transaction is not rolled back. FAIL processing means that 2036 ** the operation in progress stops and returns an error code. But prior 2037 ** changes due to the same operation are not backed out and no rollback 2038 ** occurs. IGNORE means that the particular row that caused the constraint 2039 ** error is not inserted or updated. Processing continues and no error 2040 ** is returned. REPLACE means that preexisting database rows that caused 2041 ** a UNIQUE constraint violation are removed so that the new insert or 2042 ** update can proceed. Processing continues and no error is reported. 2043 ** 2044 ** RESTRICT, SETNULL, and CASCADE actions apply only to foreign keys. 2045 ** RESTRICT is the same as ABORT for IMMEDIATE foreign keys and the 2046 ** same as ROLLBACK for DEFERRED keys. SETNULL means that the foreign 2047 ** key is set to NULL. CASCADE means that a DELETE or UPDATE of the 2048 ** referenced table row is propagated into the row that holds the 2049 ** foreign key. 2050 ** 2051 ** The following symbolic values are used to record which type 2052 ** of action to take. 2053 */ 2054 #define OE_None 0 /* There is no constraint to check */ 2055 #define OE_Rollback 1 /* Fail the operation and rollback the transaction */ 2056 #define OE_Abort 2 /* Back out changes but do no rollback transaction */ 2057 #define OE_Fail 3 /* Stop the operation but leave all prior changes */ 2058 #define OE_Ignore 4 /* Ignore the error. Do not do the INSERT or UPDATE */ 2059 #define OE_Replace 5 /* Delete existing record, then do INSERT or UPDATE */ 2060 #define OE_Update 6 /* Process as a DO UPDATE in an upsert */ 2061 #define OE_Restrict 7 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */ 2062 #define OE_SetNull 8 /* Set the foreign key value to NULL */ 2063 #define OE_SetDflt 9 /* Set the foreign key value to its default */ 2064 #define OE_Cascade 10 /* Cascade the changes */ 2065 #define OE_Default 11 /* Do whatever the default action is */ 2066 2067 2068 /* 2069 ** An instance of the following structure is passed as the first 2070 ** argument to sqlite3VdbeKeyCompare and is used to control the 2071 ** comparison of the two index keys. 2072 ** 2073 ** Note that aSortOrder[] and aColl[] have nField+1 slots. There 2074 ** are nField slots for the columns of an index then one extra slot 2075 ** for the rowid at the end. 2076 */ 2077 struct KeyInfo { 2078 u32 nRef; /* Number of references to this KeyInfo object */ 2079 u8 enc; /* Text encoding - one of the SQLITE_UTF* values */ 2080 u16 nKeyField; /* Number of key columns in the index */ 2081 u16 nAllField; /* Total columns, including key plus others */ 2082 sqlite3 *db; /* The database connection */ 2083 u8 *aSortOrder; /* Sort order for each column. */ 2084 CollSeq *aColl[1]; /* Collating sequence for each term of the key */ 2085 }; 2086 2087 /* 2088 ** This object holds a record which has been parsed out into individual 2089 ** fields, for the purposes of doing a comparison. 2090 ** 2091 ** A record is an object that contains one or more fields of data. 2092 ** Records are used to store the content of a table row and to store 2093 ** the key of an index. A blob encoding of a record is created by 2094 ** the OP_MakeRecord opcode of the VDBE and is disassembled by the 2095 ** OP_Column opcode. 2096 ** 2097 ** An instance of this object serves as a "key" for doing a search on 2098 ** an index b+tree. The goal of the search is to find the entry that 2099 ** is closed to the key described by this object. This object might hold 2100 ** just a prefix of the key. The number of fields is given by 2101 ** pKeyInfo->nField. 2102 ** 2103 ** The r1 and r2 fields are the values to return if this key is less than 2104 ** or greater than a key in the btree, respectively. These are normally 2105 ** -1 and +1 respectively, but might be inverted to +1 and -1 if the b-tree 2106 ** is in DESC order. 2107 ** 2108 ** The key comparison functions actually return default_rc when they find 2109 ** an equals comparison. default_rc can be -1, 0, or +1. If there are 2110 ** multiple entries in the b-tree with the same key (when only looking 2111 ** at the first pKeyInfo->nFields,) then default_rc can be set to -1 to 2112 ** cause the search to find the last match, or +1 to cause the search to 2113 ** find the first match. 2114 ** 2115 ** The key comparison functions will set eqSeen to true if they ever 2116 ** get and equal results when comparing this structure to a b-tree record. 2117 ** When default_rc!=0, the search might end up on the record immediately 2118 ** before the first match or immediately after the last match. The 2119 ** eqSeen field will indicate whether or not an exact match exists in the 2120 ** b-tree. 2121 */ 2122 struct UnpackedRecord { 2123 KeyInfo *pKeyInfo; /* Collation and sort-order information */ 2124 Mem *aMem; /* Values */ 2125 u16 nField; /* Number of entries in apMem[] */ 2126 i8 default_rc; /* Comparison result if keys are equal */ 2127 u8 errCode; /* Error detected by xRecordCompare (CORRUPT or NOMEM) */ 2128 i8 r1; /* Value to return if (lhs < rhs) */ 2129 i8 r2; /* Value to return if (lhs > rhs) */ 2130 u8 eqSeen; /* True if an equality comparison has been seen */ 2131 }; 2132 2133 2134 /* 2135 ** Each SQL index is represented in memory by an 2136 ** instance of the following structure. 2137 ** 2138 ** The columns of the table that are to be indexed are described 2139 ** by the aiColumn[] field of this structure. For example, suppose 2140 ** we have the following table and index: 2141 ** 2142 ** CREATE TABLE Ex1(c1 int, c2 int, c3 text); 2143 ** CREATE INDEX Ex2 ON Ex1(c3,c1); 2144 ** 2145 ** In the Table structure describing Ex1, nCol==3 because there are 2146 ** three columns in the table. In the Index structure describing 2147 ** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed. 2148 ** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the 2149 ** first column to be indexed (c3) has an index of 2 in Ex1.aCol[]. 2150 ** The second column to be indexed (c1) has an index of 0 in 2151 ** Ex1.aCol[], hence Ex2.aiColumn[1]==0. 2152 ** 2153 ** The Index.onError field determines whether or not the indexed columns 2154 ** must be unique and what to do if they are not. When Index.onError=OE_None, 2155 ** it means this is not a unique index. Otherwise it is a unique index 2156 ** and the value of Index.onError indicate the which conflict resolution 2157 ** algorithm to employ whenever an attempt is made to insert a non-unique 2158 ** element. 2159 ** 2160 ** While parsing a CREATE TABLE or CREATE INDEX statement in order to 2161 ** generate VDBE code (as opposed to parsing one read from an sqlite_master 2162 ** table as part of parsing an existing database schema), transient instances 2163 ** of this structure may be created. In this case the Index.tnum variable is 2164 ** used to store the address of a VDBE instruction, not a database page 2165 ** number (it cannot - the database page is not allocated until the VDBE 2166 ** program is executed). See convertToWithoutRowidTable() for details. 2167 */ 2168 struct Index { 2169 char *zName; /* Name of this index */ 2170 i16 *aiColumn; /* Which columns are used by this index. 1st is 0 */ 2171 LogEst *aiRowLogEst; /* From ANALYZE: Est. rows selected by each column */ 2172 Table *pTable; /* The SQL table being indexed */ 2173 char *zColAff; /* String defining the affinity of each column */ 2174 Index *pNext; /* The next index associated with the same table */ 2175 Schema *pSchema; /* Schema containing this index */ 2176 u8 *aSortOrder; /* for each column: True==DESC, False==ASC */ 2177 const char **azColl; /* Array of collation sequence names for index */ 2178 Expr *pPartIdxWhere; /* WHERE clause for partial indices */ 2179 ExprList *aColExpr; /* Column expressions */ 2180 int tnum; /* DB Page containing root of this index */ 2181 LogEst szIdxRow; /* Estimated average row size in bytes */ 2182 u16 nKeyCol; /* Number of columns forming the key */ 2183 u16 nColumn; /* Number of columns stored in the index */ 2184 u8 onError; /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */ 2185 unsigned idxType:2; /* 1==UNIQUE, 2==PRIMARY KEY, 0==CREATE INDEX */ 2186 unsigned bUnordered:1; /* Use this index for == or IN queries only */ 2187 unsigned uniqNotNull:1; /* True if UNIQUE and NOT NULL for all columns */ 2188 unsigned isResized:1; /* True if resizeIndexObject() has been called */ 2189 unsigned isCovering:1; /* True if this is a covering index */ 2190 unsigned noSkipScan:1; /* Do not try to use skip-scan if true */ 2191 unsigned hasStat1:1; /* aiRowLogEst values come from sqlite_stat1 */ 2192 unsigned bNoQuery:1; /* Do not use this index to optimize queries */ 2193 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 2194 int nSample; /* Number of elements in aSample[] */ 2195 int nSampleCol; /* Size of IndexSample.anEq[] and so on */ 2196 tRowcnt *aAvgEq; /* Average nEq values for keys not in aSample */ 2197 IndexSample *aSample; /* Samples of the left-most key */ 2198 tRowcnt *aiRowEst; /* Non-logarithmic stat1 data for this index */ 2199 tRowcnt nRowEst0; /* Non-logarithmic number of rows in the index */ 2200 #endif 2201 }; 2202 2203 /* 2204 ** Allowed values for Index.idxType 2205 */ 2206 #define SQLITE_IDXTYPE_APPDEF 0 /* Created using CREATE INDEX */ 2207 #define SQLITE_IDXTYPE_UNIQUE 1 /* Implements a UNIQUE constraint */ 2208 #define SQLITE_IDXTYPE_PRIMARYKEY 2 /* Is the PRIMARY KEY for the table */ 2209 2210 /* Return true if index X is a PRIMARY KEY index */ 2211 #define IsPrimaryKeyIndex(X) ((X)->idxType==SQLITE_IDXTYPE_PRIMARYKEY) 2212 2213 /* Return true if index X is a UNIQUE index */ 2214 #define IsUniqueIndex(X) ((X)->onError!=OE_None) 2215 2216 /* The Index.aiColumn[] values are normally positive integer. But 2217 ** there are some negative values that have special meaning: 2218 */ 2219 #define XN_ROWID (-1) /* Indexed column is the rowid */ 2220 #define XN_EXPR (-2) /* Indexed column is an expression */ 2221 2222 /* 2223 ** Each sample stored in the sqlite_stat3 table is represented in memory 2224 ** using a structure of this type. See documentation at the top of the 2225 ** analyze.c source file for additional information. 2226 */ 2227 struct IndexSample { 2228 void *p; /* Pointer to sampled record */ 2229 int n; /* Size of record in bytes */ 2230 tRowcnt *anEq; /* Est. number of rows where the key equals this sample */ 2231 tRowcnt *anLt; /* Est. number of rows where key is less than this sample */ 2232 tRowcnt *anDLt; /* Est. number of distinct keys less than this sample */ 2233 }; 2234 2235 /* 2236 ** Each token coming out of the lexer is an instance of 2237 ** this structure. Tokens are also used as part of an expression. 2238 ** 2239 ** Note if Token.z==0 then Token.dyn and Token.n are undefined and 2240 ** may contain random values. Do not make any assumptions about Token.dyn 2241 ** and Token.n when Token.z==0. 2242 */ 2243 struct Token { 2244 const char *z; /* Text of the token. Not NULL-terminated! */ 2245 unsigned int n; /* Number of characters in this token */ 2246 }; 2247 2248 /* 2249 ** An instance of this structure contains information needed to generate 2250 ** code for a SELECT that contains aggregate functions. 2251 ** 2252 ** If Expr.op==TK_AGG_COLUMN or TK_AGG_FUNCTION then Expr.pAggInfo is a 2253 ** pointer to this structure. The Expr.iColumn field is the index in 2254 ** AggInfo.aCol[] or AggInfo.aFunc[] of information needed to generate 2255 ** code for that node. 2256 ** 2257 ** AggInfo.pGroupBy and AggInfo.aFunc.pExpr point to fields within the 2258 ** original Select structure that describes the SELECT statement. These 2259 ** fields do not need to be freed when deallocating the AggInfo structure. 2260 */ 2261 struct AggInfo { 2262 u8 directMode; /* Direct rendering mode means take data directly 2263 ** from source tables rather than from accumulators */ 2264 u8 useSortingIdx; /* In direct mode, reference the sorting index rather 2265 ** than the source table */ 2266 int sortingIdx; /* Cursor number of the sorting index */ 2267 int sortingIdxPTab; /* Cursor number of pseudo-table */ 2268 int nSortingColumn; /* Number of columns in the sorting index */ 2269 int mnReg, mxReg; /* Range of registers allocated for aCol and aFunc */ 2270 ExprList *pGroupBy; /* The group by clause */ 2271 struct AggInfo_col { /* For each column used in source tables */ 2272 Table *pTab; /* Source table */ 2273 int iTable; /* Cursor number of the source table */ 2274 int iColumn; /* Column number within the source table */ 2275 int iSorterColumn; /* Column number in the sorting index */ 2276 int iMem; /* Memory location that acts as accumulator */ 2277 Expr *pExpr; /* The original expression */ 2278 } *aCol; 2279 int nColumn; /* Number of used entries in aCol[] */ 2280 int nAccumulator; /* Number of columns that show through to the output. 2281 ** Additional columns are used only as parameters to 2282 ** aggregate functions */ 2283 struct AggInfo_func { /* For each aggregate function */ 2284 Expr *pExpr; /* Expression encoding the function */ 2285 FuncDef *pFunc; /* The aggregate function implementation */ 2286 int iMem; /* Memory location that acts as accumulator */ 2287 int iDistinct; /* Ephemeral table used to enforce DISTINCT */ 2288 } *aFunc; 2289 int nFunc; /* Number of entries in aFunc[] */ 2290 }; 2291 2292 /* 2293 ** The datatype ynVar is a signed integer, either 16-bit or 32-bit. 2294 ** Usually it is 16-bits. But if SQLITE_MAX_VARIABLE_NUMBER is greater 2295 ** than 32767 we have to make it 32-bit. 16-bit is preferred because 2296 ** it uses less memory in the Expr object, which is a big memory user 2297 ** in systems with lots of prepared statements. And few applications 2298 ** need more than about 10 or 20 variables. But some extreme users want 2299 ** to have prepared statements with over 32767 variables, and for them 2300 ** the option is available (at compile-time). 2301 */ 2302 #if SQLITE_MAX_VARIABLE_NUMBER<=32767 2303 typedef i16 ynVar; 2304 #else 2305 typedef int ynVar; 2306 #endif 2307 2308 /* 2309 ** Each node of an expression in the parse tree is an instance 2310 ** of this structure. 2311 ** 2312 ** Expr.op is the opcode. The integer parser token codes are reused 2313 ** as opcodes here. For example, the parser defines TK_GE to be an integer 2314 ** code representing the ">=" operator. This same integer code is reused 2315 ** to represent the greater-than-or-equal-to operator in the expression 2316 ** tree. 2317 ** 2318 ** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB, 2319 ** or TK_STRING), then Expr.token contains the text of the SQL literal. If 2320 ** the expression is a variable (TK_VARIABLE), then Expr.token contains the 2321 ** variable name. Finally, if the expression is an SQL function (TK_FUNCTION), 2322 ** then Expr.token contains the name of the function. 2323 ** 2324 ** Expr.pRight and Expr.pLeft are the left and right subexpressions of a 2325 ** binary operator. Either or both may be NULL. 2326 ** 2327 ** Expr.x.pList is a list of arguments if the expression is an SQL function, 2328 ** a CASE expression or an IN expression of the form "<lhs> IN (<y>, <z>...)". 2329 ** Expr.x.pSelect is used if the expression is a sub-select or an expression of 2330 ** the form "<lhs> IN (SELECT ...)". If the EP_xIsSelect bit is set in the 2331 ** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is 2332 ** valid. 2333 ** 2334 ** An expression of the form ID or ID.ID refers to a column in a table. 2335 ** For such expressions, Expr.op is set to TK_COLUMN and Expr.iTable is 2336 ** the integer cursor number of a VDBE cursor pointing to that table and 2337 ** Expr.iColumn is the column number for the specific column. If the 2338 ** expression is used as a result in an aggregate SELECT, then the 2339 ** value is also stored in the Expr.iAgg column in the aggregate so that 2340 ** it can be accessed after all aggregates are computed. 2341 ** 2342 ** If the expression is an unbound variable marker (a question mark 2343 ** character '?' in the original SQL) then the Expr.iTable holds the index 2344 ** number for that variable. 2345 ** 2346 ** If the expression is a subquery then Expr.iColumn holds an integer 2347 ** register number containing the result of the subquery. If the 2348 ** subquery gives a constant result, then iTable is -1. If the subquery 2349 ** gives a different answer at different times during statement processing 2350 ** then iTable is the address of a subroutine that computes the subquery. 2351 ** 2352 ** If the Expr is of type OP_Column, and the table it is selecting from 2353 ** is a disk table or the "old.*" pseudo-table, then pTab points to the 2354 ** corresponding table definition. 2355 ** 2356 ** ALLOCATION NOTES: 2357 ** 2358 ** Expr objects can use a lot of memory space in database schema. To 2359 ** help reduce memory requirements, sometimes an Expr object will be 2360 ** truncated. And to reduce the number of memory allocations, sometimes 2361 ** two or more Expr objects will be stored in a single memory allocation, 2362 ** together with Expr.zToken strings. 2363 ** 2364 ** If the EP_Reduced and EP_TokenOnly flags are set when 2365 ** an Expr object is truncated. When EP_Reduced is set, then all 2366 ** the child Expr objects in the Expr.pLeft and Expr.pRight subtrees 2367 ** are contained within the same memory allocation. Note, however, that 2368 ** the subtrees in Expr.x.pList or Expr.x.pSelect are always separately 2369 ** allocated, regardless of whether or not EP_Reduced is set. 2370 */ 2371 struct Expr { 2372 u8 op; /* Operation performed by this node */ 2373 char affinity; /* The affinity of the column or 0 if not a column */ 2374 u32 flags; /* Various flags. EP_* See below */ 2375 union { 2376 char *zToken; /* Token value. Zero terminated and dequoted */ 2377 int iValue; /* Non-negative integer value if EP_IntValue */ 2378 } u; 2379 2380 /* If the EP_TokenOnly flag is set in the Expr.flags mask, then no 2381 ** space is allocated for the fields below this point. An attempt to 2382 ** access them will result in a segfault or malfunction. 2383 *********************************************************************/ 2384 2385 Expr *pLeft; /* Left subnode */ 2386 Expr *pRight; /* Right subnode */ 2387 union { 2388 ExprList *pList; /* op = IN, EXISTS, SELECT, CASE, FUNCTION, BETWEEN */ 2389 Select *pSelect; /* EP_xIsSelect and op = IN, EXISTS, SELECT */ 2390 } x; 2391 2392 /* If the EP_Reduced flag is set in the Expr.flags mask, then no 2393 ** space is allocated for the fields below this point. An attempt to 2394 ** access them will result in a segfault or malfunction. 2395 *********************************************************************/ 2396 2397 #if SQLITE_MAX_EXPR_DEPTH>0 2398 int nHeight; /* Height of the tree headed by this node */ 2399 #endif 2400 int iTable; /* TK_COLUMN: cursor number of table holding column 2401 ** TK_REGISTER: register number 2402 ** TK_TRIGGER: 1 -> new, 0 -> old 2403 ** EP_Unlikely: 134217728 times likelihood 2404 ** TK_SELECT: 1st register of result vector */ 2405 ynVar iColumn; /* TK_COLUMN: column index. -1 for rowid. 2406 ** TK_VARIABLE: variable number (always >= 1). 2407 ** TK_SELECT_COLUMN: column of the result vector */ 2408 i16 iAgg; /* Which entry in pAggInfo->aCol[] or ->aFunc[] */ 2409 i16 iRightJoinTable; /* If EP_FromJoin, the right table of the join */ 2410 u8 op2; /* TK_REGISTER: original value of Expr.op 2411 ** TK_COLUMN: the value of p5 for OP_Column 2412 ** TK_AGG_FUNCTION: nesting depth */ 2413 AggInfo *pAggInfo; /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */ 2414 Table *pTab; /* Table for TK_COLUMN expressions. Can be NULL 2415 ** for a column of an index on an expression */ 2416 }; 2417 2418 /* 2419 ** The following are the meanings of bits in the Expr.flags field. 2420 */ 2421 #define EP_FromJoin 0x000001 /* Originates in ON/USING clause of outer join */ 2422 #define EP_Agg 0x000002 /* Contains one or more aggregate functions */ 2423 #define EP_HasFunc 0x000004 /* Contains one or more functions of any kind */ 2424 /* 0x000008 // available for use */ 2425 #define EP_Distinct 0x000010 /* Aggregate function with DISTINCT keyword */ 2426 #define EP_VarSelect 0x000020 /* pSelect is correlated, not constant */ 2427 #define EP_DblQuoted 0x000040 /* token.z was originally in "..." */ 2428 #define EP_InfixFunc 0x000080 /* True for an infix function: LIKE, GLOB, etc */ 2429 #define EP_Collate 0x000100 /* Tree contains a TK_COLLATE operator */ 2430 #define EP_Generic 0x000200 /* Ignore COLLATE or affinity on this tree */ 2431 #define EP_IntValue 0x000400 /* Integer value contained in u.iValue */ 2432 #define EP_xIsSelect 0x000800 /* x.pSelect is valid (otherwise x.pList is) */ 2433 #define EP_Skip 0x001000 /* COLLATE, AS, or UNLIKELY */ 2434 #define EP_Reduced 0x002000 /* Expr struct EXPR_REDUCEDSIZE bytes only */ 2435 #define EP_TokenOnly 0x004000 /* Expr struct EXPR_TOKENONLYSIZE bytes only */ 2436 #define EP_Static 0x008000 /* Held in memory not obtained from malloc() */ 2437 #define EP_MemToken 0x010000 /* Need to sqlite3DbFree() Expr.zToken */ 2438 #define EP_NoReduce 0x020000 /* Cannot EXPRDUP_REDUCE this Expr */ 2439 #define EP_Unlikely 0x040000 /* unlikely() or likelihood() function */ 2440 #define EP_ConstFunc 0x080000 /* A SQLITE_FUNC_CONSTANT or _SLOCHNG function */ 2441 #define EP_CanBeNull 0x100000 /* Can be null despite NOT NULL constraint */ 2442 #define EP_Subquery 0x200000 /* Tree contains a TK_SELECT operator */ 2443 #define EP_Alias 0x400000 /* Is an alias for a result set column */ 2444 #define EP_Leaf 0x800000 /* Expr.pLeft, .pRight, .u.pSelect all NULL */ 2445 2446 /* 2447 ** The EP_Propagate mask is a set of properties that automatically propagate 2448 ** upwards into parent nodes. 2449 */ 2450 #define EP_Propagate (EP_Collate|EP_Subquery|EP_HasFunc) 2451 2452 /* 2453 ** These macros can be used to test, set, or clear bits in the 2454 ** Expr.flags field. 2455 */ 2456 #define ExprHasProperty(E,P) (((E)->flags&(P))!=0) 2457 #define ExprHasAllProperty(E,P) (((E)->flags&(P))==(P)) 2458 #define ExprSetProperty(E,P) (E)->flags|=(P) 2459 #define ExprClearProperty(E,P) (E)->flags&=~(P) 2460 2461 /* The ExprSetVVAProperty() macro is used for Verification, Validation, 2462 ** and Accreditation only. It works like ExprSetProperty() during VVA 2463 ** processes but is a no-op for delivery. 2464 */ 2465 #ifdef SQLITE_DEBUG 2466 # define ExprSetVVAProperty(E,P) (E)->flags|=(P) 2467 #else 2468 # define ExprSetVVAProperty(E,P) 2469 #endif 2470 2471 /* 2472 ** Macros to determine the number of bytes required by a normal Expr 2473 ** struct, an Expr struct with the EP_Reduced flag set in Expr.flags 2474 ** and an Expr struct with the EP_TokenOnly flag set. 2475 */ 2476 #define EXPR_FULLSIZE sizeof(Expr) /* Full size */ 2477 #define EXPR_REDUCEDSIZE offsetof(Expr,iTable) /* Common features */ 2478 #define EXPR_TOKENONLYSIZE offsetof(Expr,pLeft) /* Fewer features */ 2479 2480 /* 2481 ** Flags passed to the sqlite3ExprDup() function. See the header comment 2482 ** above sqlite3ExprDup() for details. 2483 */ 2484 #define EXPRDUP_REDUCE 0x0001 /* Used reduced-size Expr nodes */ 2485 2486 /* 2487 ** A list of expressions. Each expression may optionally have a 2488 ** name. An expr/name combination can be used in several ways, such 2489 ** as the list of "expr AS ID" fields following a "SELECT" or in the 2490 ** list of "ID = expr" items in an UPDATE. A list of expressions can 2491 ** also be used as the argument to a function, in which case the a.zName 2492 ** field is not used. 2493 ** 2494 ** By default the Expr.zSpan field holds a human-readable description of 2495 ** the expression that is used in the generation of error messages and 2496 ** column labels. In this case, Expr.zSpan is typically the text of a 2497 ** column expression as it exists in a SELECT statement. However, if 2498 ** the bSpanIsTab flag is set, then zSpan is overloaded to mean the name 2499 ** of the result column in the form: DATABASE.TABLE.COLUMN. This later 2500 ** form is used for name resolution with nested FROM clauses. 2501 */ 2502 struct ExprList { 2503 int nExpr; /* Number of expressions on the list */ 2504 struct ExprList_item { /* For each expression in the list */ 2505 Expr *pExpr; /* The parse tree for this expression */ 2506 char *zName; /* Token associated with this expression */ 2507 char *zSpan; /* Original text of the expression */ 2508 u8 sortOrder; /* 1 for DESC or 0 for ASC */ 2509 unsigned done :1; /* A flag to indicate when processing is finished */ 2510 unsigned bSpanIsTab :1; /* zSpan holds DB.TABLE.COLUMN */ 2511 unsigned reusable :1; /* Constant expression is reusable */ 2512 unsigned bSorterRef :1; /* Defer evaluation until after sorting */ 2513 union { 2514 struct { 2515 u16 iOrderByCol; /* For ORDER BY, column number in result set */ 2516 u16 iAlias; /* Index into Parse.aAlias[] for zName */ 2517 } x; 2518 int iConstExprReg; /* Register in which Expr value is cached */ 2519 } u; 2520 } a[1]; /* One slot for each expression in the list */ 2521 }; 2522 2523 /* 2524 ** An instance of this structure can hold a simple list of identifiers, 2525 ** such as the list "a,b,c" in the following statements: 2526 ** 2527 ** INSERT INTO t(a,b,c) VALUES ...; 2528 ** CREATE INDEX idx ON t(a,b,c); 2529 ** CREATE TRIGGER trig BEFORE UPDATE ON t(a,b,c) ...; 2530 ** 2531 ** The IdList.a.idx field is used when the IdList represents the list of 2532 ** column names after a table name in an INSERT statement. In the statement 2533 ** 2534 ** INSERT INTO t(a,b,c) ... 2535 ** 2536 ** If "a" is the k-th column of table "t", then IdList.a[0].idx==k. 2537 */ 2538 struct IdList { 2539 struct IdList_item { 2540 char *zName; /* Name of the identifier */ 2541 int idx; /* Index in some Table.aCol[] of a column named zName */ 2542 } *a; 2543 int nId; /* Number of identifiers on the list */ 2544 }; 2545 2546 /* 2547 ** The bitmask datatype defined below is used for various optimizations. 2548 ** 2549 ** Changing this from a 64-bit to a 32-bit type limits the number of 2550 ** tables in a join to 32 instead of 64. But it also reduces the size 2551 ** of the library by 738 bytes on ix86. 2552 */ 2553 #ifdef SQLITE_BITMASK_TYPE 2554 typedef SQLITE_BITMASK_TYPE Bitmask; 2555 #else 2556 typedef u64 Bitmask; 2557 #endif 2558 2559 /* 2560 ** The number of bits in a Bitmask. "BMS" means "BitMask Size". 2561 */ 2562 #define BMS ((int)(sizeof(Bitmask)*8)) 2563 2564 /* 2565 ** A bit in a Bitmask 2566 */ 2567 #define MASKBIT(n) (((Bitmask)1)<<(n)) 2568 #define MASKBIT32(n) (((unsigned int)1)<<(n)) 2569 #define ALLBITS ((Bitmask)-1) 2570 2571 /* 2572 ** The following structure describes the FROM clause of a SELECT statement. 2573 ** Each table or subquery in the FROM clause is a separate element of 2574 ** the SrcList.a[] array. 2575 ** 2576 ** With the addition of multiple database support, the following structure 2577 ** can also be used to describe a particular table such as the table that 2578 ** is modified by an INSERT, DELETE, or UPDATE statement. In standard SQL, 2579 ** such a table must be a simple name: ID. But in SQLite, the table can 2580 ** now be identified by a database name, a dot, then the table name: ID.ID. 2581 ** 2582 ** The jointype starts out showing the join type between the current table 2583 ** and the next table on the list. The parser builds the list this way. 2584 ** But sqlite3SrcListShiftJoinType() later shifts the jointypes so that each 2585 ** jointype expresses the join between the table and the previous table. 2586 ** 2587 ** In the colUsed field, the high-order bit (bit 63) is set if the table 2588 ** contains more than 63 columns and the 64-th or later column is used. 2589 */ 2590 struct SrcList { 2591 int nSrc; /* Number of tables or subqueries in the FROM clause */ 2592 u32 nAlloc; /* Number of entries allocated in a[] below */ 2593 struct SrcList_item { 2594 Schema *pSchema; /* Schema to which this item is fixed */ 2595 char *zDatabase; /* Name of database holding this table */ 2596 char *zName; /* Name of the table */ 2597 char *zAlias; /* The "B" part of a "A AS B" phrase. zName is the "A" */ 2598 Table *pTab; /* An SQL table corresponding to zName */ 2599 Select *pSelect; /* A SELECT statement used in place of a table name */ 2600 int addrFillSub; /* Address of subroutine to manifest a subquery */ 2601 int regReturn; /* Register holding return address of addrFillSub */ 2602 int regResult; /* Registers holding results of a co-routine */ 2603 struct { 2604 u8 jointype; /* Type of join between this table and the previous */ 2605 unsigned notIndexed :1; /* True if there is a NOT INDEXED clause */ 2606 unsigned isIndexedBy :1; /* True if there is an INDEXED BY clause */ 2607 unsigned isTabFunc :1; /* True if table-valued-function syntax */ 2608 unsigned isCorrelated :1; /* True if sub-query is correlated */ 2609 unsigned viaCoroutine :1; /* Implemented as a co-routine */ 2610 unsigned isRecursive :1; /* True for recursive reference in WITH */ 2611 } fg; 2612 int iCursor; /* The VDBE cursor number used to access this table */ 2613 Expr *pOn; /* The ON clause of a join */ 2614 IdList *pUsing; /* The USING clause of a join */ 2615 Bitmask colUsed; /* Bit N (1<<N) set if column N of pTab is used */ 2616 union { 2617 char *zIndexedBy; /* Identifier from "INDEXED BY <zIndex>" clause */ 2618 ExprList *pFuncArg; /* Arguments to table-valued-function */ 2619 } u1; 2620 Index *pIBIndex; /* Index structure corresponding to u1.zIndexedBy */ 2621 } a[1]; /* One entry for each identifier on the list */ 2622 }; 2623 2624 /* 2625 ** Permitted values of the SrcList.a.jointype field 2626 */ 2627 #define JT_INNER 0x0001 /* Any kind of inner or cross join */ 2628 #define JT_CROSS 0x0002 /* Explicit use of the CROSS keyword */ 2629 #define JT_NATURAL 0x0004 /* True for a "natural" join */ 2630 #define JT_LEFT 0x0008 /* Left outer join */ 2631 #define JT_RIGHT 0x0010 /* Right outer join */ 2632 #define JT_OUTER 0x0020 /* The "OUTER" keyword is present */ 2633 #define JT_ERROR 0x0040 /* unknown or unsupported join type */ 2634 2635 2636 /* 2637 ** Flags appropriate for the wctrlFlags parameter of sqlite3WhereBegin() 2638 ** and the WhereInfo.wctrlFlags member. 2639 ** 2640 ** Value constraints (enforced via assert()): 2641 ** WHERE_USE_LIMIT == SF_FixedLimit 2642 */ 2643 #define WHERE_ORDERBY_NORMAL 0x0000 /* No-op */ 2644 #define WHERE_ORDERBY_MIN 0x0001 /* ORDER BY processing for min() func */ 2645 #define WHERE_ORDERBY_MAX 0x0002 /* ORDER BY processing for max() func */ 2646 #define WHERE_ONEPASS_DESIRED 0x0004 /* Want to do one-pass UPDATE/DELETE */ 2647 #define WHERE_ONEPASS_MULTIROW 0x0008 /* ONEPASS is ok with multiple rows */ 2648 #define WHERE_DUPLICATES_OK 0x0010 /* Ok to return a row more than once */ 2649 #define WHERE_OR_SUBCLAUSE 0x0020 /* Processing a sub-WHERE as part of 2650 ** the OR optimization */ 2651 #define WHERE_GROUPBY 0x0040 /* pOrderBy is really a GROUP BY */ 2652 #define WHERE_DISTINCTBY 0x0080 /* pOrderby is really a DISTINCT clause */ 2653 #define WHERE_WANT_DISTINCT 0x0100 /* All output needs to be distinct */ 2654 #define WHERE_SORTBYGROUP 0x0200 /* Support sqlite3WhereIsSorted() */ 2655 #define WHERE_SEEK_TABLE 0x0400 /* Do not defer seeks on main table */ 2656 #define WHERE_ORDERBY_LIMIT 0x0800 /* ORDERBY+LIMIT on the inner loop */ 2657 #define WHERE_SEEK_UNIQ_TABLE 0x1000 /* Do not defer seeks if unique */ 2658 /* 0x2000 not currently used */ 2659 #define WHERE_USE_LIMIT 0x4000 /* Use the LIMIT in cost estimates */ 2660 /* 0x8000 not currently used */ 2661 2662 /* Allowed return values from sqlite3WhereIsDistinct() 2663 */ 2664 #define WHERE_DISTINCT_NOOP 0 /* DISTINCT keyword not used */ 2665 #define WHERE_DISTINCT_UNIQUE 1 /* No duplicates */ 2666 #define WHERE_DISTINCT_ORDERED 2 /* All duplicates are adjacent */ 2667 #define WHERE_DISTINCT_UNORDERED 3 /* Duplicates are scattered */ 2668 2669 /* 2670 ** A NameContext defines a context in which to resolve table and column 2671 ** names. The context consists of a list of tables (the pSrcList) field and 2672 ** a list of named expression (pEList). The named expression list may 2673 ** be NULL. The pSrc corresponds to the FROM clause of a SELECT or 2674 ** to the table being operated on by INSERT, UPDATE, or DELETE. The 2675 ** pEList corresponds to the result set of a SELECT and is NULL for 2676 ** other statements. 2677 ** 2678 ** NameContexts can be nested. When resolving names, the inner-most 2679 ** context is searched first. If no match is found, the next outer 2680 ** context is checked. If there is still no match, the next context 2681 ** is checked. This process continues until either a match is found 2682 ** or all contexts are check. When a match is found, the nRef member of 2683 ** the context containing the match is incremented. 2684 ** 2685 ** Each subquery gets a new NameContext. The pNext field points to the 2686 ** NameContext in the parent query. Thus the process of scanning the 2687 ** NameContext list corresponds to searching through successively outer 2688 ** subqueries looking for a match. 2689 */ 2690 struct NameContext { 2691 Parse *pParse; /* The parser */ 2692 SrcList *pSrcList; /* One or more tables used to resolve names */ 2693 union { 2694 ExprList *pEList; /* Optional list of result-set columns */ 2695 AggInfo *pAggInfo; /* Information about aggregates at this level */ 2696 Upsert *pUpsert; /* ON CONFLICT clause information from an upsert */ 2697 } uNC; 2698 NameContext *pNext; /* Next outer name context. NULL for outermost */ 2699 int nRef; /* Number of names resolved by this context */ 2700 int nErr; /* Number of errors encountered while resolving names */ 2701 u16 ncFlags; /* Zero or more NC_* flags defined below */ 2702 }; 2703 2704 /* 2705 ** Allowed values for the NameContext, ncFlags field. 2706 ** 2707 ** Value constraints (all checked via assert()): 2708 ** NC_HasAgg == SF_HasAgg 2709 ** NC_MinMaxAgg == SF_MinMaxAgg == SQLITE_FUNC_MINMAX 2710 ** 2711 */ 2712 #define NC_AllowAgg 0x0001 /* Aggregate functions are allowed here */ 2713 #define NC_PartIdx 0x0002 /* True if resolving a partial index WHERE */ 2714 #define NC_IsCheck 0x0004 /* True if resolving names in a CHECK constraint */ 2715 #define NC_InAggFunc 0x0008 /* True if analyzing arguments to an agg func */ 2716 #define NC_HasAgg 0x0010 /* One or more aggregate functions seen */ 2717 #define NC_IdxExpr 0x0020 /* True if resolving columns of CREATE INDEX */ 2718 #define NC_VarSelect 0x0040 /* A correlated subquery has been seen */ 2719 #define NC_UEList 0x0080 /* True if uNC.pEList is used */ 2720 #define NC_UAggInfo 0x0100 /* True if uNC.pAggInfo is used */ 2721 #define NC_UUpsert 0x0200 /* True if uNC.pUpsert is used */ 2722 #define NC_MinMaxAgg 0x1000 /* min/max aggregates seen. See note above */ 2723 #define NC_Complex 0x2000 /* True if a function or subquery seen */ 2724 2725 /* 2726 ** An instance of the following object describes a single ON CONFLICT 2727 ** clause in an upsert. 2728 ** 2729 ** The pUpsertTarget field is only set if the ON CONFLICT clause includes 2730 ** conflict-target clause. (In "ON CONFLICT(a,b)" the "(a,b)" is the 2731 ** conflict-target clause.) The pUpsertTargetWhere is the optional 2732 ** WHERE clause used to identify partial unique indexes. 2733 ** 2734 ** pUpsertSet is the list of column=expr terms of the UPDATE statement. 2735 ** The pUpsertSet field is NULL for a ON CONFLICT DO NOTHING. The 2736 ** pUpsertWhere is the WHERE clause for the UPDATE and is NULL if the 2737 ** WHERE clause is omitted. 2738 */ 2739 struct Upsert { 2740 ExprList *pUpsertTarget; /* Optional description of conflicting index */ 2741 Expr *pUpsertTargetWhere; /* WHERE clause for partial index targets */ 2742 ExprList *pUpsertSet; /* The SET clause from an ON CONFLICT UPDATE */ 2743 Expr *pUpsertWhere; /* WHERE clause for the ON CONFLICT UPDATE */ 2744 /* The fields above comprise the parse tree for the upsert clause. 2745 ** The fields below are used to transfer information from the INSERT 2746 ** processing down into the UPDATE processing while generating code. 2747 ** Upsert owns the memory allocated above, but not the memory below. */ 2748 Index *pUpsertIdx; /* Constraint that pUpsertTarget identifies */ 2749 SrcList *pUpsertSrc; /* Table to be updated */ 2750 int regData; /* First register holding array of VALUES */ 2751 int iDataCur; /* Index of the data cursor */ 2752 int iIdxCur; /* Index of the first index cursor */ 2753 }; 2754 2755 /* 2756 ** An instance of the following structure contains all information 2757 ** needed to generate code for a single SELECT statement. 2758 ** 2759 ** See the header comment on the computeLimitRegisters() routine for a 2760 ** detailed description of the meaning of the iLimit and iOffset fields. 2761 ** 2762 ** addrOpenEphm[] entries contain the address of OP_OpenEphemeral opcodes. 2763 ** These addresses must be stored so that we can go back and fill in 2764 ** the P4_KEYINFO and P2 parameters later. Neither the KeyInfo nor 2765 ** the number of columns in P2 can be computed at the same time 2766 ** as the OP_OpenEphm instruction is coded because not 2767 ** enough information about the compound query is known at that point. 2768 ** The KeyInfo for addrOpenTran[0] and [1] contains collating sequences 2769 ** for the result set. The KeyInfo for addrOpenEphm[2] contains collating 2770 ** sequences for the ORDER BY clause. 2771 */ 2772 struct Select { 2773 ExprList *pEList; /* The fields of the result */ 2774 u8 op; /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */ 2775 LogEst nSelectRow; /* Estimated number of result rows */ 2776 u32 selFlags; /* Various SF_* values */ 2777 int iLimit, iOffset; /* Memory registers holding LIMIT & OFFSET counters */ 2778 #if SELECTTRACE_ENABLED 2779 char zSelName[12]; /* Symbolic name of this SELECT use for debugging */ 2780 #endif 2781 int addrOpenEphm[2]; /* OP_OpenEphem opcodes related to this select */ 2782 SrcList *pSrc; /* The FROM clause */ 2783 Expr *pWhere; /* The WHERE clause */ 2784 ExprList *pGroupBy; /* The GROUP BY clause */ 2785 Expr *pHaving; /* The HAVING clause */ 2786 ExprList *pOrderBy; /* The ORDER BY clause */ 2787 Select *pPrior; /* Prior select in a compound select statement */ 2788 Select *pNext; /* Next select to the left in a compound */ 2789 Expr *pLimit; /* LIMIT expression. NULL means not used. */ 2790 With *pWith; /* WITH clause attached to this select. Or NULL. */ 2791 }; 2792 2793 /* 2794 ** Allowed values for Select.selFlags. The "SF" prefix stands for 2795 ** "Select Flag". 2796 ** 2797 ** Value constraints (all checked via assert()) 2798 ** SF_HasAgg == NC_HasAgg 2799 ** SF_MinMaxAgg == NC_MinMaxAgg == SQLITE_FUNC_MINMAX 2800 ** SF_FixedLimit == WHERE_USE_LIMIT 2801 */ 2802 #define SF_Distinct 0x00001 /* Output should be DISTINCT */ 2803 #define SF_All 0x00002 /* Includes the ALL keyword */ 2804 #define SF_Resolved 0x00004 /* Identifiers have been resolved */ 2805 #define SF_Aggregate 0x00008 /* Contains agg functions or a GROUP BY */ 2806 #define SF_HasAgg 0x00010 /* Contains aggregate functions */ 2807 #define SF_UsesEphemeral 0x00020 /* Uses the OpenEphemeral opcode */ 2808 #define SF_Expanded 0x00040 /* sqlite3SelectExpand() called on this */ 2809 #define SF_HasTypeInfo 0x00080 /* FROM subqueries have Table metadata */ 2810 #define SF_Compound 0x00100 /* Part of a compound query */ 2811 #define SF_Values 0x00200 /* Synthesized from VALUES clause */ 2812 #define SF_MultiValue 0x00400 /* Single VALUES term with multiple rows */ 2813 #define SF_NestedFrom 0x00800 /* Part of a parenthesized FROM clause */ 2814 #define SF_MinMaxAgg 0x01000 /* Aggregate containing min() or max() */ 2815 #define SF_Recursive 0x02000 /* The recursive part of a recursive CTE */ 2816 #define SF_FixedLimit 0x04000 /* nSelectRow set by a constant LIMIT */ 2817 #define SF_MaybeConvert 0x08000 /* Need convertCompoundSelectToSubquery() */ 2818 #define SF_Converted 0x10000 /* By convertCompoundSelectToSubquery() */ 2819 #define SF_IncludeHidden 0x20000 /* Include hidden columns in output */ 2820 #define SF_ComplexResult 0x40000 /* Result contains subquery or function */ 2821 2822 /* 2823 ** The results of a SELECT can be distributed in several ways, as defined 2824 ** by one of the following macros. The "SRT" prefix means "SELECT Result 2825 ** Type". 2826 ** 2827 ** SRT_Union Store results as a key in a temporary index 2828 ** identified by pDest->iSDParm. 2829 ** 2830 ** SRT_Except Remove results from the temporary index pDest->iSDParm. 2831 ** 2832 ** SRT_Exists Store a 1 in memory cell pDest->iSDParm if the result 2833 ** set is not empty. 2834 ** 2835 ** SRT_Discard Throw the results away. This is used by SELECT 2836 ** statements within triggers whose only purpose is 2837 ** the side-effects of functions. 2838 ** 2839 ** All of the above are free to ignore their ORDER BY clause. Those that 2840 ** follow must honor the ORDER BY clause. 2841 ** 2842 ** SRT_Output Generate a row of output (using the OP_ResultRow 2843 ** opcode) for each row in the result set. 2844 ** 2845 ** SRT_Mem Only valid if the result is a single column. 2846 ** Store the first column of the first result row 2847 ** in register pDest->iSDParm then abandon the rest 2848 ** of the query. This destination implies "LIMIT 1". 2849 ** 2850 ** SRT_Set The result must be a single column. Store each 2851 ** row of result as the key in table pDest->iSDParm. 2852 ** Apply the affinity pDest->affSdst before storing 2853 ** results. Used to implement "IN (SELECT ...)". 2854 ** 2855 ** SRT_EphemTab Create an temporary table pDest->iSDParm and store 2856 ** the result there. The cursor is left open after 2857 ** returning. This is like SRT_Table except that 2858 ** this destination uses OP_OpenEphemeral to create 2859 ** the table first. 2860 ** 2861 ** SRT_Coroutine Generate a co-routine that returns a new row of 2862 ** results each time it is invoked. The entry point 2863 ** of the co-routine is stored in register pDest->iSDParm 2864 ** and the result row is stored in pDest->nDest registers 2865 ** starting with pDest->iSdst. 2866 ** 2867 ** SRT_Table Store results in temporary table pDest->iSDParm. 2868 ** SRT_Fifo This is like SRT_EphemTab except that the table 2869 ** is assumed to already be open. SRT_Fifo has 2870 ** the additional property of being able to ignore 2871 ** the ORDER BY clause. 2872 ** 2873 ** SRT_DistFifo Store results in a temporary table pDest->iSDParm. 2874 ** But also use temporary table pDest->iSDParm+1 as 2875 ** a record of all prior results and ignore any duplicate 2876 ** rows. Name means: "Distinct Fifo". 2877 ** 2878 ** SRT_Queue Store results in priority queue pDest->iSDParm (really 2879 ** an index). Append a sequence number so that all entries 2880 ** are distinct. 2881 ** 2882 ** SRT_DistQueue Store results in priority queue pDest->iSDParm only if 2883 ** the same record has never been stored before. The 2884 ** index at pDest->iSDParm+1 hold all prior stores. 2885 */ 2886 #define SRT_Union 1 /* Store result as keys in an index */ 2887 #define SRT_Except 2 /* Remove result from a UNION index */ 2888 #define SRT_Exists 3 /* Store 1 if the result is not empty */ 2889 #define SRT_Discard 4 /* Do not save the results anywhere */ 2890 #define SRT_Fifo 5 /* Store result as data with an automatic rowid */ 2891 #define SRT_DistFifo 6 /* Like SRT_Fifo, but unique results only */ 2892 #define SRT_Queue 7 /* Store result in an queue */ 2893 #define SRT_DistQueue 8 /* Like SRT_Queue, but unique results only */ 2894 2895 /* The ORDER BY clause is ignored for all of the above */ 2896 #define IgnorableOrderby(X) ((X->eDest)<=SRT_DistQueue) 2897 2898 #define SRT_Output 9 /* Output each row of result */ 2899 #define SRT_Mem 10 /* Store result in a memory cell */ 2900 #define SRT_Set 11 /* Store results as keys in an index */ 2901 #define SRT_EphemTab 12 /* Create transient tab and store like SRT_Table */ 2902 #define SRT_Coroutine 13 /* Generate a single row of result */ 2903 #define SRT_Table 14 /* Store result as data with an automatic rowid */ 2904 2905 /* 2906 ** An instance of this object describes where to put of the results of 2907 ** a SELECT statement. 2908 */ 2909 struct SelectDest { 2910 u8 eDest; /* How to dispose of the results. On of SRT_* above. */ 2911 int iSDParm; /* A parameter used by the eDest disposal method */ 2912 int iSdst; /* Base register where results are written */ 2913 int nSdst; /* Number of registers allocated */ 2914 char *zAffSdst; /* Affinity used when eDest==SRT_Set */ 2915 ExprList *pOrderBy; /* Key columns for SRT_Queue and SRT_DistQueue */ 2916 }; 2917 2918 /* 2919 ** During code generation of statements that do inserts into AUTOINCREMENT 2920 ** tables, the following information is attached to the Table.u.autoInc.p 2921 ** pointer of each autoincrement table to record some side information that 2922 ** the code generator needs. We have to keep per-table autoincrement 2923 ** information in case inserts are done within triggers. Triggers do not 2924 ** normally coordinate their activities, but we do need to coordinate the 2925 ** loading and saving of autoincrement information. 2926 */ 2927 struct AutoincInfo { 2928 AutoincInfo *pNext; /* Next info block in a list of them all */ 2929 Table *pTab; /* Table this info block refers to */ 2930 int iDb; /* Index in sqlite3.aDb[] of database holding pTab */ 2931 int regCtr; /* Memory register holding the rowid counter */ 2932 }; 2933 2934 /* 2935 ** Size of the column cache 2936 */ 2937 #ifndef SQLITE_N_COLCACHE 2938 # define SQLITE_N_COLCACHE 10 2939 #endif 2940 2941 /* 2942 ** At least one instance of the following structure is created for each 2943 ** trigger that may be fired while parsing an INSERT, UPDATE or DELETE 2944 ** statement. All such objects are stored in the linked list headed at 2945 ** Parse.pTriggerPrg and deleted once statement compilation has been 2946 ** completed. 2947 ** 2948 ** A Vdbe sub-program that implements the body and WHEN clause of trigger 2949 ** TriggerPrg.pTrigger, assuming a default ON CONFLICT clause of 2950 ** TriggerPrg.orconf, is stored in the TriggerPrg.pProgram variable. 2951 ** The Parse.pTriggerPrg list never contains two entries with the same 2952 ** values for both pTrigger and orconf. 2953 ** 2954 ** The TriggerPrg.aColmask[0] variable is set to a mask of old.* columns 2955 ** accessed (or set to 0 for triggers fired as a result of INSERT 2956 ** statements). Similarly, the TriggerPrg.aColmask[1] variable is set to 2957 ** a mask of new.* columns used by the program. 2958 */ 2959 struct TriggerPrg { 2960 Trigger *pTrigger; /* Trigger this program was coded from */ 2961 TriggerPrg *pNext; /* Next entry in Parse.pTriggerPrg list */ 2962 SubProgram *pProgram; /* Program implementing pTrigger/orconf */ 2963 int orconf; /* Default ON CONFLICT policy */ 2964 u32 aColmask[2]; /* Masks of old.*, new.* columns accessed */ 2965 }; 2966 2967 /* 2968 ** The yDbMask datatype for the bitmask of all attached databases. 2969 */ 2970 #if SQLITE_MAX_ATTACHED>30 2971 typedef unsigned char yDbMask[(SQLITE_MAX_ATTACHED+9)/8]; 2972 # define DbMaskTest(M,I) (((M)[(I)/8]&(1<<((I)&7)))!=0) 2973 # define DbMaskZero(M) memset((M),0,sizeof(M)) 2974 # define DbMaskSet(M,I) (M)[(I)/8]|=(1<<((I)&7)) 2975 # define DbMaskAllZero(M) sqlite3DbMaskAllZero(M) 2976 # define DbMaskNonZero(M) (sqlite3DbMaskAllZero(M)==0) 2977 #else 2978 typedef unsigned int yDbMask; 2979 # define DbMaskTest(M,I) (((M)&(((yDbMask)1)<<(I)))!=0) 2980 # define DbMaskZero(M) (M)=0 2981 # define DbMaskSet(M,I) (M)|=(((yDbMask)1)<<(I)) 2982 # define DbMaskAllZero(M) (M)==0 2983 # define DbMaskNonZero(M) (M)!=0 2984 #endif 2985 2986 /* 2987 ** An SQL parser context. A copy of this structure is passed through 2988 ** the parser and down into all the parser action routine in order to 2989 ** carry around information that is global to the entire parse. 2990 ** 2991 ** The structure is divided into two parts. When the parser and code 2992 ** generate call themselves recursively, the first part of the structure 2993 ** is constant but the second part is reset at the beginning and end of 2994 ** each recursion. 2995 ** 2996 ** The nTableLock and aTableLock variables are only used if the shared-cache 2997 ** feature is enabled (if sqlite3Tsd()->useSharedData is true). They are 2998 ** used to store the set of table-locks required by the statement being 2999 ** compiled. Function sqlite3TableLock() is used to add entries to the 3000 ** list. 3001 */ 3002 struct Parse { 3003 sqlite3 *db; /* The main database structure */ 3004 char *zErrMsg; /* An error message */ 3005 Vdbe *pVdbe; /* An engine for executing database bytecode */ 3006 int rc; /* Return code from execution */ 3007 u8 colNamesSet; /* TRUE after OP_ColumnName has been issued to pVdbe */ 3008 u8 checkSchema; /* Causes schema cookie check after an error */ 3009 u8 nested; /* Number of nested calls to the parser/code generator */ 3010 u8 nTempReg; /* Number of temporary registers in aTempReg[] */ 3011 u8 isMultiWrite; /* True if statement may modify/insert multiple rows */ 3012 u8 mayAbort; /* True if statement may throw an ABORT exception */ 3013 u8 hasCompound; /* Need to invoke convertCompoundSelectToSubquery() */ 3014 u8 okConstFactor; /* OK to factor out constants */ 3015 u8 disableLookaside; /* Number of times lookaside has been disabled */ 3016 u8 nColCache; /* Number of entries in aColCache[] */ 3017 int nRangeReg; /* Size of the temporary register block */ 3018 int iRangeReg; /* First register in temporary register block */ 3019 int nErr; /* Number of errors seen */ 3020 int nTab; /* Number of previously allocated VDBE cursors */ 3021 int nMem; /* Number of memory cells used so far */ 3022 int nOpAlloc; /* Number of slots allocated for Vdbe.aOp[] */ 3023 int szOpAlloc; /* Bytes of memory space allocated for Vdbe.aOp[] */ 3024 int iSelfTab; /* Table associated with an index on expr, or negative 3025 ** of the base register during check-constraint eval */ 3026 int iCacheLevel; /* ColCache valid when aColCache[].iLevel<=iCacheLevel */ 3027 int iCacheCnt; /* Counter used to generate aColCache[].lru values */ 3028 int nLabel; /* Number of labels used */ 3029 int *aLabel; /* Space to hold the labels */ 3030 ExprList *pConstExpr;/* Constant expressions */ 3031 Token constraintName;/* Name of the constraint currently being parsed */ 3032 yDbMask writeMask; /* Start a write transaction on these databases */ 3033 yDbMask cookieMask; /* Bitmask of schema verified databases */ 3034 int regRowid; /* Register holding rowid of CREATE TABLE entry */ 3035 int regRoot; /* Register holding root page number for new objects */ 3036 int nMaxArg; /* Max args passed to user function by sub-program */ 3037 #if SELECTTRACE_ENABLED 3038 int nSelect; /* Number of SELECT statements seen */ 3039 #endif 3040 #ifndef SQLITE_OMIT_SHARED_CACHE 3041 int nTableLock; /* Number of locks in aTableLock */ 3042 TableLock *aTableLock; /* Required table locks for shared-cache mode */ 3043 #endif 3044 AutoincInfo *pAinc; /* Information about AUTOINCREMENT counters */ 3045 Parse *pToplevel; /* Parse structure for main program (or NULL) */ 3046 Table *pTriggerTab; /* Table triggers are being coded for */ 3047 int addrCrTab; /* Address of OP_CreateBtree opcode on CREATE TABLE */ 3048 u32 nQueryLoop; /* Est number of iterations of a query (10*log2(N)) */ 3049 u32 oldmask; /* Mask of old.* columns referenced */ 3050 u32 newmask; /* Mask of new.* columns referenced */ 3051 u8 eTriggerOp; /* TK_UPDATE, TK_INSERT or TK_DELETE */ 3052 u8 eOrconf; /* Default ON CONFLICT policy for trigger steps */ 3053 u8 disableTriggers; /* True to disable triggers */ 3054 3055 /************************************************************************** 3056 ** Fields above must be initialized to zero. The fields that follow, 3057 ** down to the beginning of the recursive section, do not need to be 3058 ** initialized as they will be set before being used. The boundary is 3059 ** determined by offsetof(Parse,aColCache). 3060 **************************************************************************/ 3061 3062 struct yColCache { 3063 int iTable; /* Table cursor number */ 3064 i16 iColumn; /* Table column number */ 3065 u8 tempReg; /* iReg is a temp register that needs to be freed */ 3066 int iLevel; /* Nesting level */ 3067 int iReg; /* Reg with value of this column. 0 means none. */ 3068 int lru; /* Least recently used entry has the smallest value */ 3069 } aColCache[SQLITE_N_COLCACHE]; /* One for each column cache entry */ 3070 int aTempReg[8]; /* Holding area for temporary registers */ 3071 Token sNameToken; /* Token with unqualified schema object name */ 3072 3073 /************************************************************************ 3074 ** Above is constant between recursions. Below is reset before and after 3075 ** each recursion. The boundary between these two regions is determined 3076 ** using offsetof(Parse,sLastToken) so the sLastToken field must be the 3077 ** first field in the recursive region. 3078 ************************************************************************/ 3079 3080 Token sLastToken; /* The last token parsed */ 3081 ynVar nVar; /* Number of '?' variables seen in the SQL so far */ 3082 u8 iPkSortOrder; /* ASC or DESC for INTEGER PRIMARY KEY */ 3083 u8 explain; /* True if the EXPLAIN flag is found on the query */ 3084 #ifndef SQLITE_OMIT_VIRTUALTABLE 3085 u8 declareVtab; /* True if inside sqlite3_declare_vtab() */ 3086 int nVtabLock; /* Number of virtual tables to lock */ 3087 #endif 3088 int nHeight; /* Expression tree height of current sub-select */ 3089 #ifndef SQLITE_OMIT_EXPLAIN 3090 int addrExplain; /* Address of current OP_Explain opcode */ 3091 #endif 3092 VList *pVList; /* Mapping between variable names and numbers */ 3093 Vdbe *pReprepare; /* VM being reprepared (sqlite3Reprepare()) */ 3094 const char *zTail; /* All SQL text past the last semicolon parsed */ 3095 Table *pNewTable; /* A table being constructed by CREATE TABLE */ 3096 Trigger *pNewTrigger; /* Trigger under construct by a CREATE TRIGGER */ 3097 const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */ 3098 #ifndef SQLITE_OMIT_VIRTUALTABLE 3099 Token sArg; /* Complete text of a module argument */ 3100 Table **apVtabLock; /* Pointer to virtual tables needing locking */ 3101 #endif 3102 Table *pZombieTab; /* List of Table objects to delete after code gen */ 3103 TriggerPrg *pTriggerPrg; /* Linked list of coded triggers */ 3104 With *pWith; /* Current WITH clause, or NULL */ 3105 With *pWithToFree; /* Free this WITH object at the end of the parse */ 3106 }; 3107 3108 /* 3109 ** Sizes and pointers of various parts of the Parse object. 3110 */ 3111 #define PARSE_HDR_SZ offsetof(Parse,aColCache) /* Recursive part w/o aColCache*/ 3112 #define PARSE_RECURSE_SZ offsetof(Parse,sLastToken) /* Recursive part */ 3113 #define PARSE_TAIL_SZ (sizeof(Parse)-PARSE_RECURSE_SZ) /* Non-recursive part */ 3114 #define PARSE_TAIL(X) (((char*)(X))+PARSE_RECURSE_SZ) /* Pointer to tail */ 3115 3116 /* 3117 ** Return true if currently inside an sqlite3_declare_vtab() call. 3118 */ 3119 #ifdef SQLITE_OMIT_VIRTUALTABLE 3120 #define IN_DECLARE_VTAB 0 3121 #else 3122 #define IN_DECLARE_VTAB (pParse->declareVtab) 3123 #endif 3124 3125 /* 3126 ** An instance of the following structure can be declared on a stack and used 3127 ** to save the Parse.zAuthContext value so that it can be restored later. 3128 */ 3129 struct AuthContext { 3130 const char *zAuthContext; /* Put saved Parse.zAuthContext here */ 3131 Parse *pParse; /* The Parse structure */ 3132 }; 3133 3134 /* 3135 ** Bitfield flags for P5 value in various opcodes. 3136 ** 3137 ** Value constraints (enforced via assert()): 3138 ** OPFLAG_LENGTHARG == SQLITE_FUNC_LENGTH 3139 ** OPFLAG_TYPEOFARG == SQLITE_FUNC_TYPEOF 3140 ** OPFLAG_BULKCSR == BTREE_BULKLOAD 3141 ** OPFLAG_SEEKEQ == BTREE_SEEK_EQ 3142 ** OPFLAG_FORDELETE == BTREE_FORDELETE 3143 ** OPFLAG_SAVEPOSITION == BTREE_SAVEPOSITION 3144 ** OPFLAG_AUXDELETE == BTREE_AUXDELETE 3145 */ 3146 #define OPFLAG_NCHANGE 0x01 /* OP_Insert: Set to update db->nChange */ 3147 /* Also used in P2 (not P5) of OP_Delete */ 3148 #define OPFLAG_EPHEM 0x01 /* OP_Column: Ephemeral output is ok */ 3149 #define OPFLAG_LASTROWID 0x20 /* Set to update db->lastRowid */ 3150 #define OPFLAG_ISUPDATE 0x04 /* This OP_Insert is an sql UPDATE */ 3151 #define OPFLAG_APPEND 0x08 /* This is likely to be an append */ 3152 #define OPFLAG_USESEEKRESULT 0x10 /* Try to avoid a seek in BtreeInsert() */ 3153 #define OPFLAG_ISNOOP 0x40 /* OP_Delete does pre-update-hook only */ 3154 #define OPFLAG_LENGTHARG 0x40 /* OP_Column only used for length() */ 3155 #define OPFLAG_TYPEOFARG 0x80 /* OP_Column only used for typeof() */ 3156 #define OPFLAG_BULKCSR 0x01 /* OP_Open** used to open bulk cursor */ 3157 #define OPFLAG_SEEKEQ 0x02 /* OP_Open** cursor uses EQ seek only */ 3158 #define OPFLAG_FORDELETE 0x08 /* OP_Open should use BTREE_FORDELETE */ 3159 #define OPFLAG_P2ISREG 0x10 /* P2 to OP_Open** is a register number */ 3160 #define OPFLAG_PERMUTE 0x01 /* OP_Compare: use the permutation */ 3161 #define OPFLAG_SAVEPOSITION 0x02 /* OP_Delete/Insert: save cursor pos */ 3162 #define OPFLAG_AUXDELETE 0x04 /* OP_Delete: index in a DELETE op */ 3163 #define OPFLAG_NOCHNG_MAGIC 0x6d /* OP_MakeRecord: serialtype 10 is ok */ 3164 3165 /* 3166 * Each trigger present in the database schema is stored as an instance of 3167 * struct Trigger. 3168 * 3169 * Pointers to instances of struct Trigger are stored in two ways. 3170 * 1. In the "trigHash" hash table (part of the sqlite3* that represents the 3171 * database). This allows Trigger structures to be retrieved by name. 3172 * 2. All triggers associated with a single table form a linked list, using the 3173 * pNext member of struct Trigger. A pointer to the first element of the 3174 * linked list is stored as the "pTrigger" member of the associated 3175 * struct Table. 3176 * 3177 * The "step_list" member points to the first element of a linked list 3178 * containing the SQL statements specified as the trigger program. 3179 */ 3180 struct Trigger { 3181 char *zName; /* The name of the trigger */ 3182 char *table; /* The table or view to which the trigger applies */ 3183 u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT */ 3184 u8 tr_tm; /* One of TRIGGER_BEFORE, TRIGGER_AFTER */ 3185 Expr *pWhen; /* The WHEN clause of the expression (may be NULL) */ 3186 IdList *pColumns; /* If this is an UPDATE OF <column-list> trigger, 3187 the <column-list> is stored here */ 3188 Schema *pSchema; /* Schema containing the trigger */ 3189 Schema *pTabSchema; /* Schema containing the table */ 3190 TriggerStep *step_list; /* Link list of trigger program steps */ 3191 Trigger *pNext; /* Next trigger associated with the table */ 3192 }; 3193 3194 /* 3195 ** A trigger is either a BEFORE or an AFTER trigger. The following constants 3196 ** determine which. 3197 ** 3198 ** If there are multiple triggers, you might of some BEFORE and some AFTER. 3199 ** In that cases, the constants below can be ORed together. 3200 */ 3201 #define TRIGGER_BEFORE 1 3202 #define TRIGGER_AFTER 2 3203 3204 /* 3205 * An instance of struct TriggerStep is used to store a single SQL statement 3206 * that is a part of a trigger-program. 3207 * 3208 * Instances of struct TriggerStep are stored in a singly linked list (linked 3209 * using the "pNext" member) referenced by the "step_list" member of the 3210 * associated struct Trigger instance. The first element of the linked list is 3211 * the first step of the trigger-program. 3212 * 3213 * The "op" member indicates whether this is a "DELETE", "INSERT", "UPDATE" or 3214 * "SELECT" statement. The meanings of the other members is determined by the 3215 * value of "op" as follows: 3216 * 3217 * (op == TK_INSERT) 3218 * orconf -> stores the ON CONFLICT algorithm 3219 * pSelect -> If this is an INSERT INTO ... SELECT ... statement, then 3220 * this stores a pointer to the SELECT statement. Otherwise NULL. 3221 * zTarget -> Dequoted name of the table to insert into. 3222 * pExprList -> If this is an INSERT INTO ... VALUES ... statement, then 3223 * this stores values to be inserted. Otherwise NULL. 3224 * pIdList -> If this is an INSERT INTO ... (<column-names>) VALUES ... 3225 * statement, then this stores the column-names to be 3226 * inserted into. 3227 * 3228 * (op == TK_DELETE) 3229 * zTarget -> Dequoted name of the table to delete from. 3230 * pWhere -> The WHERE clause of the DELETE statement if one is specified. 3231 * Otherwise NULL. 3232 * 3233 * (op == TK_UPDATE) 3234 * zTarget -> Dequoted name of the table to update. 3235 * pWhere -> The WHERE clause of the UPDATE statement if one is specified. 3236 * Otherwise NULL. 3237 * pExprList -> A list of the columns to update and the expressions to update 3238 * them to. See sqlite3Update() documentation of "pChanges" 3239 * argument. 3240 * 3241 */ 3242 struct TriggerStep { 3243 u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */ 3244 u8 orconf; /* OE_Rollback etc. */ 3245 Trigger *pTrig; /* The trigger that this step is a part of */ 3246 Select *pSelect; /* SELECT statement or RHS of INSERT INTO SELECT ... */ 3247 char *zTarget; /* Target table for DELETE, UPDATE, INSERT */ 3248 Expr *pWhere; /* The WHERE clause for DELETE or UPDATE steps */ 3249 ExprList *pExprList; /* SET clause for UPDATE */ 3250 IdList *pIdList; /* Column names for INSERT */ 3251 Upsert *pUpsert; /* Upsert clauses on an INSERT */ 3252 char *zSpan; /* Original SQL text of this command */ 3253 TriggerStep *pNext; /* Next in the link-list */ 3254 TriggerStep *pLast; /* Last element in link-list. Valid for 1st elem only */ 3255 }; 3256 3257 /* 3258 ** The following structure contains information used by the sqliteFix... 3259 ** routines as they walk the parse tree to make database references 3260 ** explicit. 3261 */ 3262 typedef struct DbFixer DbFixer; 3263 struct DbFixer { 3264 Parse *pParse; /* The parsing context. Error messages written here */ 3265 Schema *pSchema; /* Fix items to this schema */ 3266 int bVarOnly; /* Check for variable references only */ 3267 const char *zDb; /* Make sure all objects are contained in this database */ 3268 const char *zType; /* Type of the container - used for error messages */ 3269 const Token *pName; /* Name of the container - used for error messages */ 3270 }; 3271 3272 /* 3273 ** An objected used to accumulate the text of a string where we 3274 ** do not necessarily know how big the string will be in the end. 3275 */ 3276 struct sqlite3_str { 3277 sqlite3 *db; /* Optional database for lookaside. Can be NULL */ 3278 char *zText; /* The string collected so far */ 3279 u32 nAlloc; /* Amount of space allocated in zText */ 3280 u32 mxAlloc; /* Maximum allowed allocation. 0 for no malloc usage */ 3281 u32 nChar; /* Length of the string so far */ 3282 u8 accError; /* SQLITE_NOMEM or SQLITE_TOOBIG */ 3283 u8 printfFlags; /* SQLITE_PRINTF flags below */ 3284 }; 3285 #define SQLITE_PRINTF_INTERNAL 0x01 /* Internal-use-only converters allowed */ 3286 #define SQLITE_PRINTF_SQLFUNC 0x02 /* SQL function arguments to VXPrintf */ 3287 #define SQLITE_PRINTF_MALLOCED 0x04 /* True if xText is allocated space */ 3288 3289 #define isMalloced(X) (((X)->printfFlags & SQLITE_PRINTF_MALLOCED)!=0) 3290 3291 3292 /* 3293 ** A pointer to this structure is used to communicate information 3294 ** from sqlite3Init and OP_ParseSchema into the sqlite3InitCallback. 3295 */ 3296 typedef struct { 3297 sqlite3 *db; /* The database being initialized */ 3298 char **pzErrMsg; /* Error message stored here */ 3299 int iDb; /* 0 for main database. 1 for TEMP, 2.. for ATTACHed */ 3300 int rc; /* Result code stored here */ 3301 } InitData; 3302 3303 /* 3304 ** Structure containing global configuration data for the SQLite library. 3305 ** 3306 ** This structure also contains some state information. 3307 */ 3308 struct Sqlite3Config { 3309 int bMemstat; /* True to enable memory status */ 3310 int bCoreMutex; /* True to enable core mutexing */ 3311 int bFullMutex; /* True to enable full mutexing */ 3312 int bOpenUri; /* True to interpret filenames as URIs */ 3313 int bUseCis; /* Use covering indices for full-scans */ 3314 int bSmallMalloc; /* Avoid large memory allocations if true */ 3315 int mxStrlen; /* Maximum string length */ 3316 int neverCorrupt; /* Database is always well-formed */ 3317 int szLookaside; /* Default lookaside buffer size */ 3318 int nLookaside; /* Default lookaside buffer count */ 3319 int nStmtSpill; /* Stmt-journal spill-to-disk threshold */ 3320 sqlite3_mem_methods m; /* Low-level memory allocation interface */ 3321 sqlite3_mutex_methods mutex; /* Low-level mutex interface */ 3322 sqlite3_pcache_methods2 pcache2; /* Low-level page-cache interface */ 3323 void *pHeap; /* Heap storage space */ 3324 int nHeap; /* Size of pHeap[] */ 3325 int mnReq, mxReq; /* Min and max heap requests sizes */ 3326 sqlite3_int64 szMmap; /* mmap() space per open file */ 3327 sqlite3_int64 mxMmap; /* Maximum value for szMmap */ 3328 void *pPage; /* Page cache memory */ 3329 int szPage; /* Size of each page in pPage[] */ 3330 int nPage; /* Number of pages in pPage[] */ 3331 int mxParserStack; /* maximum depth of the parser stack */ 3332 int sharedCacheEnabled; /* true if shared-cache mode enabled */ 3333 u32 szPma; /* Maximum Sorter PMA size */ 3334 /* The above might be initialized to non-zero. The following need to always 3335 ** initially be zero, however. */ 3336 int isInit; /* True after initialization has finished */ 3337 int inProgress; /* True while initialization in progress */ 3338 int isMutexInit; /* True after mutexes are initialized */ 3339 int isMallocInit; /* True after malloc is initialized */ 3340 int isPCacheInit; /* True after malloc is initialized */ 3341 int nRefInitMutex; /* Number of users of pInitMutex */ 3342 sqlite3_mutex *pInitMutex; /* Mutex used by sqlite3_initialize() */ 3343 void (*xLog)(void*,int,const char*); /* Function for logging */ 3344 void *pLogArg; /* First argument to xLog() */ 3345 #ifdef SQLITE_ENABLE_SQLLOG 3346 void(*xSqllog)(void*,sqlite3*,const char*, int); 3347 void *pSqllogArg; 3348 #endif 3349 #ifdef SQLITE_VDBE_COVERAGE 3350 /* The following callback (if not NULL) is invoked on every VDBE branch 3351 ** operation. Set the callback using SQLITE_TESTCTRL_VDBE_COVERAGE. 3352 */ 3353 void (*xVdbeBranch)(void*,int iSrcLine,u8 eThis,u8 eMx); /* Callback */ 3354 void *pVdbeBranchArg; /* 1st argument */ 3355 #endif 3356 #ifndef SQLITE_UNTESTABLE 3357 int (*xTestCallback)(int); /* Invoked by sqlite3FaultSim() */ 3358 #endif 3359 int bLocaltimeFault; /* True to fail localtime() calls */ 3360 int iOnceResetThreshold; /* When to reset OP_Once counters */ 3361 u32 szSorterRef; /* Min size in bytes to use sorter-refs */ 3362 }; 3363 3364 /* 3365 ** This macro is used inside of assert() statements to indicate that 3366 ** the assert is only valid on a well-formed database. Instead of: 3367 ** 3368 ** assert( X ); 3369 ** 3370 ** One writes: 3371 ** 3372 ** assert( X || CORRUPT_DB ); 3373 ** 3374 ** CORRUPT_DB is true during normal operation. CORRUPT_DB does not indicate 3375 ** that the database is definitely corrupt, only that it might be corrupt. 3376 ** For most test cases, CORRUPT_DB is set to false using a special 3377 ** sqlite3_test_control(). This enables assert() statements to prove 3378 ** things that are always true for well-formed databases. 3379 */ 3380 #define CORRUPT_DB (sqlite3Config.neverCorrupt==0) 3381 3382 /* 3383 ** Context pointer passed down through the tree-walk. 3384 */ 3385 struct Walker { 3386 Parse *pParse; /* Parser context. */ 3387 int (*xExprCallback)(Walker*, Expr*); /* Callback for expressions */ 3388 int (*xSelectCallback)(Walker*,Select*); /* Callback for SELECTs */ 3389 void (*xSelectCallback2)(Walker*,Select*);/* Second callback for SELECTs */ 3390 int walkerDepth; /* Number of subqueries */ 3391 u8 eCode; /* A small processing code */ 3392 union { /* Extra data for callback */ 3393 NameContext *pNC; /* Naming context */ 3394 int n; /* A counter */ 3395 int iCur; /* A cursor number */ 3396 SrcList *pSrcList; /* FROM clause */ 3397 struct SrcCount *pSrcCount; /* Counting column references */ 3398 struct CCurHint *pCCurHint; /* Used by codeCursorHint() */ 3399 int *aiCol; /* array of column indexes */ 3400 struct IdxCover *pIdxCover; /* Check for index coverage */ 3401 struct IdxExprTrans *pIdxTrans; /* Convert idxed expr to column */ 3402 ExprList *pGroupBy; /* GROUP BY clause */ 3403 Select *pSelect; /* HAVING to WHERE clause ctx */ 3404 } u; 3405 }; 3406 3407 /* Forward declarations */ 3408 int sqlite3WalkExpr(Walker*, Expr*); 3409 int sqlite3WalkExprList(Walker*, ExprList*); 3410 int sqlite3WalkSelect(Walker*, Select*); 3411 int sqlite3WalkSelectExpr(Walker*, Select*); 3412 int sqlite3WalkSelectFrom(Walker*, Select*); 3413 int sqlite3ExprWalkNoop(Walker*, Expr*); 3414 int sqlite3SelectWalkNoop(Walker*, Select*); 3415 int sqlite3SelectWalkFail(Walker*, Select*); 3416 #ifdef SQLITE_DEBUG 3417 void sqlite3SelectWalkAssert2(Walker*, Select*); 3418 #endif 3419 3420 /* 3421 ** Return code from the parse-tree walking primitives and their 3422 ** callbacks. 3423 */ 3424 #define WRC_Continue 0 /* Continue down into children */ 3425 #define WRC_Prune 1 /* Omit children but continue walking siblings */ 3426 #define WRC_Abort 2 /* Abandon the tree walk */ 3427 3428 /* 3429 ** An instance of this structure represents a set of one or more CTEs 3430 ** (common table expressions) created by a single WITH clause. 3431 */ 3432 struct With { 3433 int nCte; /* Number of CTEs in the WITH clause */ 3434 With *pOuter; /* Containing WITH clause, or NULL */ 3435 struct Cte { /* For each CTE in the WITH clause.... */ 3436 char *zName; /* Name of this CTE */ 3437 ExprList *pCols; /* List of explicit column names, or NULL */ 3438 Select *pSelect; /* The definition of this CTE */ 3439 const char *zCteErr; /* Error message for circular references */ 3440 } a[1]; 3441 }; 3442 3443 #ifdef SQLITE_DEBUG 3444 /* 3445 ** An instance of the TreeView object is used for printing the content of 3446 ** data structures on sqlite3DebugPrintf() using a tree-like view. 3447 */ 3448 struct TreeView { 3449 int iLevel; /* Which level of the tree we are on */ 3450 u8 bLine[100]; /* Draw vertical in column i if bLine[i] is true */ 3451 }; 3452 #endif /* SQLITE_DEBUG */ 3453 3454 /* 3455 ** Assuming zIn points to the first byte of a UTF-8 character, 3456 ** advance zIn to point to the first byte of the next UTF-8 character. 3457 */ 3458 #define SQLITE_SKIP_UTF8(zIn) { \ 3459 if( (*(zIn++))>=0xc0 ){ \ 3460 while( (*zIn & 0xc0)==0x80 ){ zIn++; } \ 3461 } \ 3462 } 3463 3464 /* 3465 ** The SQLITE_*_BKPT macros are substitutes for the error codes with 3466 ** the same name but without the _BKPT suffix. These macros invoke 3467 ** routines that report the line-number on which the error originated 3468 ** using sqlite3_log(). The routines also provide a convenient place 3469 ** to set a debugger breakpoint. 3470 */ 3471 int sqlite3ReportError(int iErr, int lineno, const char *zType); 3472 int sqlite3CorruptError(int); 3473 int sqlite3MisuseError(int); 3474 int sqlite3CantopenError(int); 3475 #define SQLITE_CORRUPT_BKPT sqlite3CorruptError(__LINE__) 3476 #define SQLITE_MISUSE_BKPT sqlite3MisuseError(__LINE__) 3477 #define SQLITE_CANTOPEN_BKPT sqlite3CantopenError(__LINE__) 3478 #ifdef SQLITE_DEBUG 3479 int sqlite3NomemError(int); 3480 int sqlite3IoerrnomemError(int); 3481 int sqlite3CorruptPgnoError(int,Pgno); 3482 # define SQLITE_NOMEM_BKPT sqlite3NomemError(__LINE__) 3483 # define SQLITE_IOERR_NOMEM_BKPT sqlite3IoerrnomemError(__LINE__) 3484 # define SQLITE_CORRUPT_PGNO(P) sqlite3CorruptPgnoError(__LINE__,(P)) 3485 #else 3486 # define SQLITE_NOMEM_BKPT SQLITE_NOMEM 3487 # define SQLITE_IOERR_NOMEM_BKPT SQLITE_IOERR_NOMEM 3488 # define SQLITE_CORRUPT_PGNO(P) sqlite3CorruptError(__LINE__) 3489 #endif 3490 3491 /* 3492 ** FTS3 and FTS4 both require virtual table support 3493 */ 3494 #if defined(SQLITE_OMIT_VIRTUALTABLE) 3495 # undef SQLITE_ENABLE_FTS3 3496 # undef SQLITE_ENABLE_FTS4 3497 #endif 3498 3499 /* 3500 ** FTS4 is really an extension for FTS3. It is enabled using the 3501 ** SQLITE_ENABLE_FTS3 macro. But to avoid confusion we also call 3502 ** the SQLITE_ENABLE_FTS4 macro to serve as an alias for SQLITE_ENABLE_FTS3. 3503 */ 3504 #if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3) 3505 # define SQLITE_ENABLE_FTS3 1 3506 #endif 3507 3508 /* 3509 ** The ctype.h header is needed for non-ASCII systems. It is also 3510 ** needed by FTS3 when FTS3 is included in the amalgamation. 3511 */ 3512 #if !defined(SQLITE_ASCII) || \ 3513 (defined(SQLITE_ENABLE_FTS3) && defined(SQLITE_AMALGAMATION)) 3514 # include <ctype.h> 3515 #endif 3516 3517 /* 3518 ** The following macros mimic the standard library functions toupper(), 3519 ** isspace(), isalnum(), isdigit() and isxdigit(), respectively. The 3520 ** sqlite versions only work for ASCII characters, regardless of locale. 3521 */ 3522 #ifdef SQLITE_ASCII 3523 # define sqlite3Toupper(x) ((x)&~(sqlite3CtypeMap[(unsigned char)(x)]&0x20)) 3524 # define sqlite3Isspace(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x01) 3525 # define sqlite3Isalnum(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x06) 3526 # define sqlite3Isalpha(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x02) 3527 # define sqlite3Isdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x04) 3528 # define sqlite3Isxdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x08) 3529 # define sqlite3Tolower(x) (sqlite3UpperToLower[(unsigned char)(x)]) 3530 # define sqlite3Isquote(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x80) 3531 #else 3532 # define sqlite3Toupper(x) toupper((unsigned char)(x)) 3533 # define sqlite3Isspace(x) isspace((unsigned char)(x)) 3534 # define sqlite3Isalnum(x) isalnum((unsigned char)(x)) 3535 # define sqlite3Isalpha(x) isalpha((unsigned char)(x)) 3536 # define sqlite3Isdigit(x) isdigit((unsigned char)(x)) 3537 # define sqlite3Isxdigit(x) isxdigit((unsigned char)(x)) 3538 # define sqlite3Tolower(x) tolower((unsigned char)(x)) 3539 # define sqlite3Isquote(x) ((x)=='"'||(x)=='\''||(x)=='['||(x)=='`') 3540 #endif 3541 #ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS 3542 int sqlite3IsIdChar(u8); 3543 #endif 3544 3545 /* 3546 ** Internal function prototypes 3547 */ 3548 int sqlite3StrICmp(const char*,const char*); 3549 int sqlite3Strlen30(const char*); 3550 char *sqlite3ColumnType(Column*,char*); 3551 #define sqlite3StrNICmp sqlite3_strnicmp 3552 3553 int sqlite3MallocInit(void); 3554 void sqlite3MallocEnd(void); 3555 void *sqlite3Malloc(u64); 3556 void *sqlite3MallocZero(u64); 3557 void *sqlite3DbMallocZero(sqlite3*, u64); 3558 void *sqlite3DbMallocRaw(sqlite3*, u64); 3559 void *sqlite3DbMallocRawNN(sqlite3*, u64); 3560 char *sqlite3DbStrDup(sqlite3*,const char*); 3561 char *sqlite3DbStrNDup(sqlite3*,const char*, u64); 3562 char *sqlite3DbSpanDup(sqlite3*,const char*,const char*); 3563 void *sqlite3Realloc(void*, u64); 3564 void *sqlite3DbReallocOrFree(sqlite3 *, void *, u64); 3565 void *sqlite3DbRealloc(sqlite3 *, void *, u64); 3566 void sqlite3DbFree(sqlite3*, void*); 3567 void sqlite3DbFreeNN(sqlite3*, void*); 3568 int sqlite3MallocSize(void*); 3569 int sqlite3DbMallocSize(sqlite3*, void*); 3570 void *sqlite3PageMalloc(int); 3571 void sqlite3PageFree(void*); 3572 void sqlite3MemSetDefault(void); 3573 #ifndef SQLITE_UNTESTABLE 3574 void sqlite3BenignMallocHooks(void (*)(void), void (*)(void)); 3575 #endif 3576 int sqlite3HeapNearlyFull(void); 3577 3578 /* 3579 ** On systems with ample stack space and that support alloca(), make 3580 ** use of alloca() to obtain space for large automatic objects. By default, 3581 ** obtain space from malloc(). 3582 ** 3583 ** The alloca() routine never returns NULL. This will cause code paths 3584 ** that deal with sqlite3StackAlloc() failures to be unreachable. 3585 */ 3586 #ifdef SQLITE_USE_ALLOCA 3587 # define sqlite3StackAllocRaw(D,N) alloca(N) 3588 # define sqlite3StackAllocZero(D,N) memset(alloca(N), 0, N) 3589 # define sqlite3StackFree(D,P) 3590 #else 3591 # define sqlite3StackAllocRaw(D,N) sqlite3DbMallocRaw(D,N) 3592 # define sqlite3StackAllocZero(D,N) sqlite3DbMallocZero(D,N) 3593 # define sqlite3StackFree(D,P) sqlite3DbFree(D,P) 3594 #endif 3595 3596 /* Do not allow both MEMSYS5 and MEMSYS3 to be defined together. If they 3597 ** are, disable MEMSYS3 3598 */ 3599 #ifdef SQLITE_ENABLE_MEMSYS5 3600 const sqlite3_mem_methods *sqlite3MemGetMemsys5(void); 3601 #undef SQLITE_ENABLE_MEMSYS3 3602 #endif 3603 #ifdef SQLITE_ENABLE_MEMSYS3 3604 const sqlite3_mem_methods *sqlite3MemGetMemsys3(void); 3605 #endif 3606 3607 3608 #ifndef SQLITE_MUTEX_OMIT 3609 sqlite3_mutex_methods const *sqlite3DefaultMutex(void); 3610 sqlite3_mutex_methods const *sqlite3NoopMutex(void); 3611 sqlite3_mutex *sqlite3MutexAlloc(int); 3612 int sqlite3MutexInit(void); 3613 int sqlite3MutexEnd(void); 3614 #endif 3615 #if !defined(SQLITE_MUTEX_OMIT) && !defined(SQLITE_MUTEX_NOOP) 3616 void sqlite3MemoryBarrier(void); 3617 #else 3618 # define sqlite3MemoryBarrier() 3619 #endif 3620 3621 sqlite3_int64 sqlite3StatusValue(int); 3622 void sqlite3StatusUp(int, int); 3623 void sqlite3StatusDown(int, int); 3624 void sqlite3StatusHighwater(int, int); 3625 int sqlite3LookasideUsed(sqlite3*,int*); 3626 3627 /* Access to mutexes used by sqlite3_status() */ 3628 sqlite3_mutex *sqlite3Pcache1Mutex(void); 3629 sqlite3_mutex *sqlite3MallocMutex(void); 3630 3631 #if defined(SQLITE_ENABLE_MULTITHREADED_CHECKS) && !defined(SQLITE_MUTEX_OMIT) 3632 void sqlite3MutexWarnOnContention(sqlite3_mutex*); 3633 #else 3634 # define sqlite3MutexWarnOnContention(x) 3635 #endif 3636 3637 #ifndef SQLITE_OMIT_FLOATING_POINT 3638 int sqlite3IsNaN(double); 3639 #else 3640 # define sqlite3IsNaN(X) 0 3641 #endif 3642 3643 /* 3644 ** An instance of the following structure holds information about SQL 3645 ** functions arguments that are the parameters to the printf() function. 3646 */ 3647 struct PrintfArguments { 3648 int nArg; /* Total number of arguments */ 3649 int nUsed; /* Number of arguments used so far */ 3650 sqlite3_value **apArg; /* The argument values */ 3651 }; 3652 3653 char *sqlite3MPrintf(sqlite3*,const char*, ...); 3654 char *sqlite3VMPrintf(sqlite3*,const char*, va_list); 3655 #if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE) 3656 void sqlite3DebugPrintf(const char*, ...); 3657 #endif 3658 #if defined(SQLITE_TEST) 3659 void *sqlite3TestTextToPtr(const char*); 3660 #endif 3661 3662 #if defined(SQLITE_DEBUG) 3663 void sqlite3TreeViewExpr(TreeView*, const Expr*, u8); 3664 void sqlite3TreeViewBareExprList(TreeView*, const ExprList*, const char*); 3665 void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*); 3666 void sqlite3TreeViewSelect(TreeView*, const Select*, u8); 3667 void sqlite3TreeViewWith(TreeView*, const With*, u8); 3668 #endif 3669 3670 3671 void sqlite3SetString(char **, sqlite3*, const char*); 3672 void sqlite3ErrorMsg(Parse*, const char*, ...); 3673 void sqlite3Dequote(char*); 3674 void sqlite3TokenInit(Token*,char*); 3675 int sqlite3KeywordCode(const unsigned char*, int); 3676 int sqlite3RunParser(Parse*, const char*, char **); 3677 void sqlite3FinishCoding(Parse*); 3678 int sqlite3GetTempReg(Parse*); 3679 void sqlite3ReleaseTempReg(Parse*,int); 3680 int sqlite3GetTempRange(Parse*,int); 3681 void sqlite3ReleaseTempRange(Parse*,int,int); 3682 void sqlite3ClearTempRegCache(Parse*); 3683 #ifdef SQLITE_DEBUG 3684 int sqlite3NoTempsInRange(Parse*,int,int); 3685 #endif 3686 Expr *sqlite3ExprAlloc(sqlite3*,int,const Token*,int); 3687 Expr *sqlite3Expr(sqlite3*,int,const char*); 3688 void sqlite3ExprAttachSubtrees(sqlite3*,Expr*,Expr*,Expr*); 3689 Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*); 3690 void sqlite3PExprAddSelect(Parse*, Expr*, Select*); 3691 Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*); 3692 Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*); 3693 void sqlite3ExprAssignVarNumber(Parse*, Expr*, u32); 3694 void sqlite3ExprDelete(sqlite3*, Expr*); 3695 ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*); 3696 ExprList *sqlite3ExprListAppendVector(Parse*,ExprList*,IdList*,Expr*); 3697 void sqlite3ExprListSetSortOrder(ExprList*,int); 3698 void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int); 3699 void sqlite3ExprListSetSpan(Parse*,ExprList*,const char*,const char*); 3700 void sqlite3ExprListDelete(sqlite3*, ExprList*); 3701 u32 sqlite3ExprListFlags(const ExprList*); 3702 int sqlite3Init(sqlite3*, char**); 3703 int sqlite3InitCallback(void*, int, char**, char**); 3704 void sqlite3Pragma(Parse*,Token*,Token*,Token*,int); 3705 #ifndef SQLITE_OMIT_VIRTUALTABLE 3706 Module *sqlite3PragmaVtabRegister(sqlite3*,const char *zName); 3707 #endif 3708 void sqlite3ResetAllSchemasOfConnection(sqlite3*); 3709 void sqlite3ResetOneSchema(sqlite3*,int); 3710 void sqlite3CollapseDatabaseArray(sqlite3*); 3711 void sqlite3CommitInternalChanges(sqlite3*); 3712 void sqlite3DeleteColumnNames(sqlite3*,Table*); 3713 int sqlite3ColumnsFromExprList(Parse*,ExprList*,i16*,Column**); 3714 void sqlite3SelectAddColumnTypeAndCollation(Parse*,Table*,Select*); 3715 Table *sqlite3ResultSetOfSelect(Parse*,Select*); 3716 void sqlite3OpenMasterTable(Parse *, int); 3717 Index *sqlite3PrimaryKeyIndex(Table*); 3718 i16 sqlite3ColumnOfIndex(Index*, i16); 3719 void sqlite3StartTable(Parse*,Token*,Token*,int,int,int,int); 3720 #if SQLITE_ENABLE_HIDDEN_COLUMNS 3721 void sqlite3ColumnPropertiesFromName(Table*, Column*); 3722 #else 3723 # define sqlite3ColumnPropertiesFromName(T,C) /* no-op */ 3724 #endif 3725 void sqlite3AddColumn(Parse*,Token*,Token*); 3726 void sqlite3AddNotNull(Parse*, int); 3727 void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int); 3728 void sqlite3AddCheckConstraint(Parse*, Expr*); 3729 void sqlite3AddDefaultValue(Parse*,Expr*,const char*,const char*); 3730 void sqlite3AddCollateType(Parse*, Token*); 3731 void sqlite3EndTable(Parse*,Token*,Token*,u8,Select*); 3732 int sqlite3ParseUri(const char*,const char*,unsigned int*, 3733 sqlite3_vfs**,char**,char **); 3734 Btree *sqlite3DbNameToBtree(sqlite3*,const char*); 3735 3736 #ifdef SQLITE_UNTESTABLE 3737 # define sqlite3FaultSim(X) SQLITE_OK 3738 #else 3739 int sqlite3FaultSim(int); 3740 #endif 3741 3742 Bitvec *sqlite3BitvecCreate(u32); 3743 int sqlite3BitvecTest(Bitvec*, u32); 3744 int sqlite3BitvecTestNotNull(Bitvec*, u32); 3745 int sqlite3BitvecSet(Bitvec*, u32); 3746 void sqlite3BitvecClear(Bitvec*, u32, void*); 3747 void sqlite3BitvecDestroy(Bitvec*); 3748 u32 sqlite3BitvecSize(Bitvec*); 3749 #ifndef SQLITE_UNTESTABLE 3750 int sqlite3BitvecBuiltinTest(int,int*); 3751 #endif 3752 3753 RowSet *sqlite3RowSetInit(sqlite3*, void*, unsigned int); 3754 void sqlite3RowSetClear(RowSet*); 3755 void sqlite3RowSetInsert(RowSet*, i64); 3756 int sqlite3RowSetTest(RowSet*, int iBatch, i64); 3757 int sqlite3RowSetNext(RowSet*, i64*); 3758 3759 void sqlite3CreateView(Parse*,Token*,Token*,Token*,ExprList*,Select*,int,int); 3760 3761 #if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) 3762 int sqlite3ViewGetColumnNames(Parse*,Table*); 3763 #else 3764 # define sqlite3ViewGetColumnNames(A,B) 0 3765 #endif 3766 3767 #if SQLITE_MAX_ATTACHED>30 3768 int sqlite3DbMaskAllZero(yDbMask); 3769 #endif 3770 void sqlite3DropTable(Parse*, SrcList*, int, int); 3771 void sqlite3CodeDropTable(Parse*, Table*, int, int); 3772 void sqlite3DeleteTable(sqlite3*, Table*); 3773 #ifndef SQLITE_OMIT_AUTOINCREMENT 3774 void sqlite3AutoincrementBegin(Parse *pParse); 3775 void sqlite3AutoincrementEnd(Parse *pParse); 3776 #else 3777 # define sqlite3AutoincrementBegin(X) 3778 # define sqlite3AutoincrementEnd(X) 3779 #endif 3780 void sqlite3Insert(Parse*, SrcList*, Select*, IdList*, int, Upsert*); 3781 void *sqlite3ArrayAllocate(sqlite3*,void*,int,int*,int*); 3782 IdList *sqlite3IdListAppend(sqlite3*, IdList*, Token*); 3783 int sqlite3IdListIndex(IdList*,const char*); 3784 SrcList *sqlite3SrcListEnlarge(sqlite3*, SrcList*, int, int); 3785 SrcList *sqlite3SrcListAppend(sqlite3*, SrcList*, Token*, Token*); 3786 SrcList *sqlite3SrcListAppendFromTerm(Parse*, SrcList*, Token*, Token*, 3787 Token*, Select*, Expr*, IdList*); 3788 void sqlite3SrcListIndexedBy(Parse *, SrcList *, Token *); 3789 void sqlite3SrcListFuncArgs(Parse*, SrcList*, ExprList*); 3790 int sqlite3IndexedByLookup(Parse *, struct SrcList_item *); 3791 void sqlite3SrcListShiftJoinType(SrcList*); 3792 void sqlite3SrcListAssignCursors(Parse*, SrcList*); 3793 void sqlite3IdListDelete(sqlite3*, IdList*); 3794 void sqlite3SrcListDelete(sqlite3*, SrcList*); 3795 Index *sqlite3AllocateIndexObject(sqlite3*,i16,int,char**); 3796 void sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*, 3797 Expr*, int, int, u8); 3798 void sqlite3DropIndex(Parse*, SrcList*, int); 3799 int sqlite3Select(Parse*, Select*, SelectDest*); 3800 Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*, 3801 Expr*,ExprList*,u32,Expr*); 3802 void sqlite3SelectDelete(sqlite3*, Select*); 3803 Table *sqlite3SrcListLookup(Parse*, SrcList*); 3804 int sqlite3IsReadOnly(Parse*, Table*, int); 3805 void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int); 3806 #if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) 3807 Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,char*); 3808 #endif 3809 void sqlite3DeleteFrom(Parse*, SrcList*, Expr*, ExprList*, Expr*); 3810 void sqlite3Update(Parse*, SrcList*, ExprList*,Expr*,int,ExprList*,Expr*, 3811 Upsert*); 3812 WhereInfo *sqlite3WhereBegin(Parse*,SrcList*,Expr*,ExprList*,ExprList*,u16,int); 3813 void sqlite3WhereEnd(WhereInfo*); 3814 LogEst sqlite3WhereOutputRowCount(WhereInfo*); 3815 int sqlite3WhereIsDistinct(WhereInfo*); 3816 int sqlite3WhereIsOrdered(WhereInfo*); 3817 int sqlite3WhereOrderedInnerLoop(WhereInfo*); 3818 int sqlite3WhereIsSorted(WhereInfo*); 3819 int sqlite3WhereContinueLabel(WhereInfo*); 3820 int sqlite3WhereBreakLabel(WhereInfo*); 3821 int sqlite3WhereOkOnePass(WhereInfo*, int*); 3822 #define ONEPASS_OFF 0 /* Use of ONEPASS not allowed */ 3823 #define ONEPASS_SINGLE 1 /* ONEPASS valid for a single row update */ 3824 #define ONEPASS_MULTI 2 /* ONEPASS is valid for multiple rows */ 3825 void sqlite3ExprCodeLoadIndexColumn(Parse*, Index*, int, int, int); 3826 int sqlite3ExprCodeGetColumn(Parse*, Table*, int, int, int, u8); 3827 void sqlite3ExprCodeGetColumnToReg(Parse*, Table*, int, int, int); 3828 void sqlite3ExprCodeGetColumnOfTable(Vdbe*, Table*, int, int, int); 3829 void sqlite3ExprCodeMove(Parse*, int, int, int); 3830 void sqlite3ExprCacheStore(Parse*, int, int, int); 3831 void sqlite3ExprCachePush(Parse*); 3832 void sqlite3ExprCachePop(Parse*); 3833 void sqlite3ExprCacheRemove(Parse*, int, int); 3834 void sqlite3ExprCacheClear(Parse*); 3835 void sqlite3ExprCacheAffinityChange(Parse*, int, int); 3836 void sqlite3ExprCode(Parse*, Expr*, int); 3837 void sqlite3ExprCodeCopy(Parse*, Expr*, int); 3838 void sqlite3ExprCodeFactorable(Parse*, Expr*, int); 3839 int sqlite3ExprCodeAtInit(Parse*, Expr*, int); 3840 int sqlite3ExprCodeTemp(Parse*, Expr*, int*); 3841 int sqlite3ExprCodeTarget(Parse*, Expr*, int); 3842 void sqlite3ExprCodeAndCache(Parse*, Expr*, int); 3843 int sqlite3ExprCodeExprList(Parse*, ExprList*, int, int, u8); 3844 #define SQLITE_ECEL_DUP 0x01 /* Deep, not shallow copies */ 3845 #define SQLITE_ECEL_FACTOR 0x02 /* Factor out constant terms */ 3846 #define SQLITE_ECEL_REF 0x04 /* Use ExprList.u.x.iOrderByCol */ 3847 #define SQLITE_ECEL_OMITREF 0x08 /* Omit if ExprList.u.x.iOrderByCol */ 3848 void sqlite3ExprIfTrue(Parse*, Expr*, int, int); 3849 void sqlite3ExprIfFalse(Parse*, Expr*, int, int); 3850 void sqlite3ExprIfFalseDup(Parse*, Expr*, int, int); 3851 Table *sqlite3FindTable(sqlite3*,const char*, const char*); 3852 #define LOCATE_VIEW 0x01 3853 #define LOCATE_NOERR 0x02 3854 Table *sqlite3LocateTable(Parse*,u32 flags,const char*, const char*); 3855 Table *sqlite3LocateTableItem(Parse*,u32 flags,struct SrcList_item *); 3856 Index *sqlite3FindIndex(sqlite3*,const char*, const char*); 3857 void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*); 3858 void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*); 3859 void sqlite3Vacuum(Parse*,Token*); 3860 int sqlite3RunVacuum(char**, sqlite3*, int); 3861 char *sqlite3NameFromToken(sqlite3*, Token*); 3862 int sqlite3ExprCompare(Parse*,Expr*, Expr*, int); 3863 int sqlite3ExprCompareSkip(Expr*, Expr*, int); 3864 int sqlite3ExprListCompare(ExprList*, ExprList*, int); 3865 int sqlite3ExprImpliesExpr(Parse*,Expr*, Expr*, int); 3866 int sqlite3ExprImpliesNonNullRow(Expr*,int); 3867 void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*); 3868 void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*); 3869 int sqlite3ExprCoveredByIndex(Expr*, int iCur, Index *pIdx); 3870 int sqlite3FunctionUsesThisSrc(Expr*, SrcList*); 3871 Vdbe *sqlite3GetVdbe(Parse*); 3872 #ifndef SQLITE_UNTESTABLE 3873 void sqlite3PrngSaveState(void); 3874 void sqlite3PrngRestoreState(void); 3875 #endif 3876 void sqlite3RollbackAll(sqlite3*,int); 3877 void sqlite3CodeVerifySchema(Parse*, int); 3878 void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb); 3879 void sqlite3BeginTransaction(Parse*, int); 3880 void sqlite3EndTransaction(Parse*,int); 3881 void sqlite3Savepoint(Parse*, int, Token*); 3882 void sqlite3CloseSavepoints(sqlite3 *); 3883 void sqlite3LeaveMutexAndCloseZombie(sqlite3*); 3884 int sqlite3ExprIdToTrueFalse(Expr*); 3885 int sqlite3ExprTruthValue(const Expr*); 3886 int sqlite3ExprIsConstant(Expr*); 3887 int sqlite3ExprIsConstantNotJoin(Expr*); 3888 int sqlite3ExprIsConstantOrFunction(Expr*, u8); 3889 int sqlite3ExprIsConstantOrGroupBy(Parse*, Expr*, ExprList*); 3890 int sqlite3ExprIsTableConstant(Expr*,int); 3891 #ifdef SQLITE_ENABLE_CURSOR_HINTS 3892 int sqlite3ExprContainsSubquery(Expr*); 3893 #endif 3894 int sqlite3ExprIsInteger(Expr*, int*); 3895 int sqlite3ExprCanBeNull(const Expr*); 3896 int sqlite3ExprNeedsNoAffinityChange(const Expr*, char); 3897 int sqlite3IsRowid(const char*); 3898 void sqlite3GenerateRowDelete( 3899 Parse*,Table*,Trigger*,int,int,int,i16,u8,u8,u8,int); 3900 void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int*, int); 3901 int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int); 3902 void sqlite3ResolvePartIdxLabel(Parse*,int); 3903 void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int, 3904 u8,u8,int,int*,int*,Upsert*); 3905 #ifdef SQLITE_ENABLE_NULL_TRIM 3906 void sqlite3SetMakeRecordP5(Vdbe*,Table*); 3907 #else 3908 # define sqlite3SetMakeRecordP5(A,B) 3909 #endif 3910 void sqlite3CompleteInsertion(Parse*,Table*,int,int,int,int*,int,int,int); 3911 int sqlite3OpenTableAndIndices(Parse*, Table*, int, u8, int, u8*, int*, int*); 3912 void sqlite3BeginWriteOperation(Parse*, int, int); 3913 void sqlite3MultiWrite(Parse*); 3914 void sqlite3MayAbort(Parse*); 3915 void sqlite3HaltConstraint(Parse*, int, int, char*, i8, u8); 3916 void sqlite3UniqueConstraint(Parse*, int, Index*); 3917 void sqlite3RowidConstraint(Parse*, int, Table*); 3918 Expr *sqlite3ExprDup(sqlite3*,Expr*,int); 3919 ExprList *sqlite3ExprListDup(sqlite3*,ExprList*,int); 3920 SrcList *sqlite3SrcListDup(sqlite3*,SrcList*,int); 3921 IdList *sqlite3IdListDup(sqlite3*,IdList*); 3922 Select *sqlite3SelectDup(sqlite3*,Select*,int); 3923 #if SELECTTRACE_ENABLED 3924 void sqlite3SelectSetName(Select*,const char*); 3925 #else 3926 # define sqlite3SelectSetName(A,B) 3927 #endif 3928 void sqlite3InsertBuiltinFuncs(FuncDef*,int); 3929 FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,u8,u8); 3930 void sqlite3RegisterBuiltinFunctions(void); 3931 void sqlite3RegisterDateTimeFunctions(void); 3932 void sqlite3RegisterPerConnectionBuiltinFunctions(sqlite3*); 3933 int sqlite3SafetyCheckOk(sqlite3*); 3934 int sqlite3SafetyCheckSickOrOk(sqlite3*); 3935 void sqlite3ChangeCookie(Parse*, int); 3936 3937 #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) 3938 void sqlite3MaterializeView(Parse*, Table*, Expr*, ExprList*,Expr*,int); 3939 #endif 3940 3941 #ifndef SQLITE_OMIT_TRIGGER 3942 void sqlite3BeginTrigger(Parse*, Token*,Token*,int,int,IdList*,SrcList*, 3943 Expr*,int, int); 3944 void sqlite3FinishTrigger(Parse*, TriggerStep*, Token*); 3945 void sqlite3DropTrigger(Parse*, SrcList*, int); 3946 void sqlite3DropTriggerPtr(Parse*, Trigger*); 3947 Trigger *sqlite3TriggersExist(Parse *, Table*, int, ExprList*, int *pMask); 3948 Trigger *sqlite3TriggerList(Parse *, Table *); 3949 void sqlite3CodeRowTrigger(Parse*, Trigger *, int, ExprList*, int, Table *, 3950 int, int, int); 3951 void sqlite3CodeRowTriggerDirect(Parse *, Trigger *, Table *, int, int, int); 3952 void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*); 3953 void sqlite3DeleteTriggerStep(sqlite3*, TriggerStep*); 3954 TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*, 3955 const char*,const char*); 3956 TriggerStep *sqlite3TriggerInsertStep(sqlite3*,Token*, IdList*, 3957 Select*,u8,Upsert*, 3958 const char*,const char*); 3959 TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8, 3960 const char*,const char*); 3961 TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*, 3962 const char*,const char*); 3963 void sqlite3DeleteTrigger(sqlite3*, Trigger*); 3964 void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*); 3965 u32 sqlite3TriggerColmask(Parse*,Trigger*,ExprList*,int,int,Table*,int); 3966 # define sqlite3ParseToplevel(p) ((p)->pToplevel ? (p)->pToplevel : (p)) 3967 # define sqlite3IsToplevel(p) ((p)->pToplevel==0) 3968 #else 3969 # define sqlite3TriggersExist(B,C,D,E,F) 0 3970 # define sqlite3DeleteTrigger(A,B) 3971 # define sqlite3DropTriggerPtr(A,B) 3972 # define sqlite3UnlinkAndDeleteTrigger(A,B,C) 3973 # define sqlite3CodeRowTrigger(A,B,C,D,E,F,G,H,I) 3974 # define sqlite3CodeRowTriggerDirect(A,B,C,D,E,F) 3975 # define sqlite3TriggerList(X, Y) 0 3976 # define sqlite3ParseToplevel(p) p 3977 # define sqlite3IsToplevel(p) 1 3978 # define sqlite3TriggerColmask(A,B,C,D,E,F,G) 0 3979 #endif 3980 3981 int sqlite3JoinType(Parse*, Token*, Token*, Token*); 3982 void sqlite3CreateForeignKey(Parse*, ExprList*, Token*, ExprList*, int); 3983 void sqlite3DeferForeignKey(Parse*, int); 3984 #ifndef SQLITE_OMIT_AUTHORIZATION 3985 void sqlite3AuthRead(Parse*,Expr*,Schema*,SrcList*); 3986 int sqlite3AuthCheck(Parse*,int, const char*, const char*, const char*); 3987 void sqlite3AuthContextPush(Parse*, AuthContext*, const char*); 3988 void sqlite3AuthContextPop(AuthContext*); 3989 int sqlite3AuthReadCol(Parse*, const char *, const char *, int); 3990 #else 3991 # define sqlite3AuthRead(a,b,c,d) 3992 # define sqlite3AuthCheck(a,b,c,d,e) SQLITE_OK 3993 # define sqlite3AuthContextPush(a,b,c) 3994 # define sqlite3AuthContextPop(a) ((void)(a)) 3995 #endif 3996 void sqlite3Attach(Parse*, Expr*, Expr*, Expr*); 3997 void sqlite3Detach(Parse*, Expr*); 3998 void sqlite3FixInit(DbFixer*, Parse*, int, const char*, const Token*); 3999 int sqlite3FixSrcList(DbFixer*, SrcList*); 4000 int sqlite3FixSelect(DbFixer*, Select*); 4001 int sqlite3FixExpr(DbFixer*, Expr*); 4002 int sqlite3FixExprList(DbFixer*, ExprList*); 4003 int sqlite3FixTriggerStep(DbFixer*, TriggerStep*); 4004 int sqlite3AtoF(const char *z, double*, int, u8); 4005 int sqlite3GetInt32(const char *, int*); 4006 int sqlite3Atoi(const char*); 4007 #ifndef SQLITE_OMIT_UTF16 4008 int sqlite3Utf16ByteLen(const void *pData, int nChar); 4009 #endif 4010 int sqlite3Utf8CharLen(const char *pData, int nByte); 4011 u32 sqlite3Utf8Read(const u8**); 4012 LogEst sqlite3LogEst(u64); 4013 LogEst sqlite3LogEstAdd(LogEst,LogEst); 4014 #ifndef SQLITE_OMIT_VIRTUALTABLE 4015 LogEst sqlite3LogEstFromDouble(double); 4016 #endif 4017 #if defined(SQLITE_ENABLE_STMT_SCANSTATUS) || \ 4018 defined(SQLITE_ENABLE_STAT3_OR_STAT4) || \ 4019 defined(SQLITE_EXPLAIN_ESTIMATED_ROWS) 4020 u64 sqlite3LogEstToInt(LogEst); 4021 #endif 4022 VList *sqlite3VListAdd(sqlite3*,VList*,const char*,int,int); 4023 const char *sqlite3VListNumToName(VList*,int); 4024 int sqlite3VListNameToNum(VList*,const char*,int); 4025 4026 /* 4027 ** Routines to read and write variable-length integers. These used to 4028 ** be defined locally, but now we use the varint routines in the util.c 4029 ** file. 4030 */ 4031 int sqlite3PutVarint(unsigned char*, u64); 4032 u8 sqlite3GetVarint(const unsigned char *, u64 *); 4033 u8 sqlite3GetVarint32(const unsigned char *, u32 *); 4034 int sqlite3VarintLen(u64 v); 4035 4036 /* 4037 ** The common case is for a varint to be a single byte. They following 4038 ** macros handle the common case without a procedure call, but then call 4039 ** the procedure for larger varints. 4040 */ 4041 #define getVarint32(A,B) \ 4042 (u8)((*(A)<(u8)0x80)?((B)=(u32)*(A)),1:sqlite3GetVarint32((A),(u32 *)&(B))) 4043 #define putVarint32(A,B) \ 4044 (u8)(((u32)(B)<(u32)0x80)?(*(A)=(unsigned char)(B)),1:\ 4045 sqlite3PutVarint((A),(B))) 4046 #define getVarint sqlite3GetVarint 4047 #define putVarint sqlite3PutVarint 4048 4049 4050 const char *sqlite3IndexAffinityStr(sqlite3*, Index*); 4051 void sqlite3TableAffinity(Vdbe*, Table*, int); 4052 char sqlite3CompareAffinity(Expr *pExpr, char aff2); 4053 int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity); 4054 char sqlite3TableColumnAffinity(Table*,int); 4055 char sqlite3ExprAffinity(Expr *pExpr); 4056 int sqlite3Atoi64(const char*, i64*, int, u8); 4057 int sqlite3DecOrHexToI64(const char*, i64*); 4058 void sqlite3ErrorWithMsg(sqlite3*, int, const char*,...); 4059 void sqlite3Error(sqlite3*,int); 4060 void sqlite3SystemError(sqlite3*,int); 4061 void *sqlite3HexToBlob(sqlite3*, const char *z, int n); 4062 u8 sqlite3HexToInt(int h); 4063 int sqlite3TwoPartName(Parse *, Token *, Token *, Token **); 4064 4065 #if defined(SQLITE_NEED_ERR_NAME) 4066 const char *sqlite3ErrName(int); 4067 #endif 4068 4069 #ifdef SQLITE_ENABLE_DESERIALIZE 4070 int sqlite3MemdbInit(void); 4071 #endif 4072 4073 const char *sqlite3ErrStr(int); 4074 int sqlite3ReadSchema(Parse *pParse); 4075 CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int); 4076 CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName); 4077 CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr); 4078 CollSeq *sqlite3ExprNNCollSeq(Parse *pParse, Expr *pExpr); 4079 int sqlite3ExprCollSeqMatch(Parse*,Expr*,Expr*); 4080 Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*, int); 4081 Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*); 4082 Expr *sqlite3ExprSkipCollate(Expr*); 4083 int sqlite3CheckCollSeq(Parse *, CollSeq *); 4084 int sqlite3CheckObjectName(Parse *, const char *); 4085 void sqlite3VdbeSetChanges(sqlite3 *, int); 4086 int sqlite3AddInt64(i64*,i64); 4087 int sqlite3SubInt64(i64*,i64); 4088 int sqlite3MulInt64(i64*,i64); 4089 int sqlite3AbsInt32(int); 4090 #ifdef SQLITE_ENABLE_8_3_NAMES 4091 void sqlite3FileSuffix3(const char*, char*); 4092 #else 4093 # define sqlite3FileSuffix3(X,Y) 4094 #endif 4095 u8 sqlite3GetBoolean(const char *z,u8); 4096 4097 const void *sqlite3ValueText(sqlite3_value*, u8); 4098 int sqlite3ValueBytes(sqlite3_value*, u8); 4099 void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8, 4100 void(*)(void*)); 4101 void sqlite3ValueSetNull(sqlite3_value*); 4102 void sqlite3ValueFree(sqlite3_value*); 4103 sqlite3_value *sqlite3ValueNew(sqlite3 *); 4104 #ifndef SQLITE_OMIT_UTF16 4105 char *sqlite3Utf16to8(sqlite3 *, const void*, int, u8); 4106 #endif 4107 int sqlite3ValueFromExpr(sqlite3 *, Expr *, u8, u8, sqlite3_value **); 4108 void sqlite3ValueApplyAffinity(sqlite3_value *, u8, u8); 4109 #ifndef SQLITE_AMALGAMATION 4110 extern const unsigned char sqlite3OpcodeProperty[]; 4111 extern const char sqlite3StrBINARY[]; 4112 extern const unsigned char sqlite3UpperToLower[]; 4113 extern const unsigned char sqlite3CtypeMap[]; 4114 extern const Token sqlite3IntTokens[]; 4115 extern SQLITE_WSD struct Sqlite3Config sqlite3Config; 4116 extern FuncDefHash sqlite3BuiltinFunctions; 4117 #ifndef SQLITE_OMIT_WSD 4118 extern int sqlite3PendingByte; 4119 #endif 4120 #endif 4121 #ifdef VDBE_PROFILE 4122 extern sqlite3_uint64 sqlite3NProfileCnt; 4123 #endif 4124 void sqlite3RootPageMoved(sqlite3*, int, int, int); 4125 void sqlite3Reindex(Parse*, Token*, Token*); 4126 void sqlite3AlterFunctions(void); 4127 void sqlite3AlterRenameTable(Parse*, SrcList*, Token*); 4128 int sqlite3GetToken(const unsigned char *, int *); 4129 void sqlite3NestedParse(Parse*, const char*, ...); 4130 void sqlite3ExpirePreparedStatements(sqlite3*); 4131 int sqlite3CodeSubselect(Parse*, Expr *, int, int); 4132 void sqlite3SelectPrep(Parse*, Select*, NameContext*); 4133 void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p); 4134 int sqlite3MatchSpanName(const char*, const char*, const char*, const char*); 4135 int sqlite3ResolveExprNames(NameContext*, Expr*); 4136 int sqlite3ResolveExprListNames(NameContext*, ExprList*); 4137 void sqlite3ResolveSelectNames(Parse*, Select*, NameContext*); 4138 void sqlite3ResolveSelfReference(Parse*,Table*,int,Expr*,ExprList*); 4139 int sqlite3ResolveOrderGroupBy(Parse*, Select*, ExprList*, const char*); 4140 void sqlite3ColumnDefault(Vdbe *, Table *, int, int); 4141 void sqlite3AlterFinishAddColumn(Parse *, Token *); 4142 void sqlite3AlterBeginAddColumn(Parse *, SrcList *); 4143 CollSeq *sqlite3GetCollSeq(Parse*, u8, CollSeq *, const char*); 4144 char sqlite3AffinityType(const char*, Column*); 4145 void sqlite3Analyze(Parse*, Token*, Token*); 4146 int sqlite3InvokeBusyHandler(BusyHandler*, sqlite3_file*); 4147 int sqlite3FindDb(sqlite3*, Token*); 4148 int sqlite3FindDbName(sqlite3 *, const char *); 4149 int sqlite3AnalysisLoad(sqlite3*,int iDB); 4150 void sqlite3DeleteIndexSamples(sqlite3*,Index*); 4151 void sqlite3DefaultRowEst(Index*); 4152 void sqlite3RegisterLikeFunctions(sqlite3*, int); 4153 int sqlite3IsLikeFunction(sqlite3*,Expr*,int*,char*); 4154 void sqlite3SchemaClear(void *); 4155 Schema *sqlite3SchemaGet(sqlite3 *, Btree *); 4156 int sqlite3SchemaToIndex(sqlite3 *db, Schema *); 4157 KeyInfo *sqlite3KeyInfoAlloc(sqlite3*,int,int); 4158 void sqlite3KeyInfoUnref(KeyInfo*); 4159 KeyInfo *sqlite3KeyInfoRef(KeyInfo*); 4160 KeyInfo *sqlite3KeyInfoOfIndex(Parse*, Index*); 4161 #ifdef SQLITE_DEBUG 4162 int sqlite3KeyInfoIsWriteable(KeyInfo*); 4163 #endif 4164 int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *, 4165 void (*)(sqlite3_context*,int,sqlite3_value **), 4166 void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*), 4167 FuncDestructor *pDestructor 4168 ); 4169 void sqlite3NoopDestructor(void*); 4170 void sqlite3OomFault(sqlite3*); 4171 void sqlite3OomClear(sqlite3*); 4172 int sqlite3ApiExit(sqlite3 *db, int); 4173 int sqlite3OpenTempDatabase(Parse *); 4174 4175 void sqlite3StrAccumInit(StrAccum*, sqlite3*, char*, int, int); 4176 char *sqlite3StrAccumFinish(StrAccum*); 4177 void sqlite3SelectDestInit(SelectDest*,int,int); 4178 Expr *sqlite3CreateColumnExpr(sqlite3 *, SrcList *, int, int); 4179 4180 void sqlite3BackupRestart(sqlite3_backup *); 4181 void sqlite3BackupUpdate(sqlite3_backup *, Pgno, const u8 *); 4182 4183 #ifndef SQLITE_OMIT_SUBQUERY 4184 int sqlite3ExprCheckIN(Parse*, Expr*); 4185 #else 4186 # define sqlite3ExprCheckIN(x,y) SQLITE_OK 4187 #endif 4188 4189 #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 4190 void sqlite3AnalyzeFunctions(void); 4191 int sqlite3Stat4ProbeSetValue( 4192 Parse*,Index*,UnpackedRecord**,Expr*,int,int,int*); 4193 int sqlite3Stat4ValueFromExpr(Parse*, Expr*, u8, sqlite3_value**); 4194 void sqlite3Stat4ProbeFree(UnpackedRecord*); 4195 int sqlite3Stat4Column(sqlite3*, const void*, int, int, sqlite3_value**); 4196 char sqlite3IndexColumnAffinity(sqlite3*, Index*, int); 4197 #endif 4198 4199 /* 4200 ** The interface to the LEMON-generated parser 4201 */ 4202 #ifndef SQLITE_AMALGAMATION 4203 void *sqlite3ParserAlloc(void*(*)(u64), Parse*); 4204 void sqlite3ParserFree(void*, void(*)(void*)); 4205 #endif 4206 void sqlite3Parser(void*, int, Token); 4207 #ifdef YYTRACKMAXSTACKDEPTH 4208 int sqlite3ParserStackPeak(void*); 4209 #endif 4210 4211 void sqlite3AutoLoadExtensions(sqlite3*); 4212 #ifndef SQLITE_OMIT_LOAD_EXTENSION 4213 void sqlite3CloseExtensions(sqlite3*); 4214 #else 4215 # define sqlite3CloseExtensions(X) 4216 #endif 4217 4218 #ifndef SQLITE_OMIT_SHARED_CACHE 4219 void sqlite3TableLock(Parse *, int, int, u8, const char *); 4220 #else 4221 #define sqlite3TableLock(v,w,x,y,z) 4222 #endif 4223 4224 #ifdef SQLITE_TEST 4225 int sqlite3Utf8To8(unsigned char*); 4226 #endif 4227 4228 #ifdef SQLITE_OMIT_VIRTUALTABLE 4229 # define sqlite3VtabClear(Y) 4230 # define sqlite3VtabSync(X,Y) SQLITE_OK 4231 # define sqlite3VtabRollback(X) 4232 # define sqlite3VtabCommit(X) 4233 # define sqlite3VtabInSync(db) 0 4234 # define sqlite3VtabLock(X) 4235 # define sqlite3VtabUnlock(X) 4236 # define sqlite3VtabUnlockList(X) 4237 # define sqlite3VtabSavepoint(X, Y, Z) SQLITE_OK 4238 # define sqlite3GetVTable(X,Y) ((VTable*)0) 4239 #else 4240 void sqlite3VtabClear(sqlite3 *db, Table*); 4241 void sqlite3VtabDisconnect(sqlite3 *db, Table *p); 4242 int sqlite3VtabSync(sqlite3 *db, Vdbe*); 4243 int sqlite3VtabRollback(sqlite3 *db); 4244 int sqlite3VtabCommit(sqlite3 *db); 4245 void sqlite3VtabLock(VTable *); 4246 void sqlite3VtabUnlock(VTable *); 4247 void sqlite3VtabUnlockList(sqlite3*); 4248 int sqlite3VtabSavepoint(sqlite3 *, int, int); 4249 void sqlite3VtabImportErrmsg(Vdbe*, sqlite3_vtab*); 4250 VTable *sqlite3GetVTable(sqlite3*, Table*); 4251 Module *sqlite3VtabCreateModule( 4252 sqlite3*, 4253 const char*, 4254 const sqlite3_module*, 4255 void*, 4256 void(*)(void*) 4257 ); 4258 # define sqlite3VtabInSync(db) ((db)->nVTrans>0 && (db)->aVTrans==0) 4259 #endif 4260 int sqlite3VtabEponymousTableInit(Parse*,Module*); 4261 void sqlite3VtabEponymousTableClear(sqlite3*,Module*); 4262 void sqlite3VtabMakeWritable(Parse*,Table*); 4263 void sqlite3VtabBeginParse(Parse*, Token*, Token*, Token*, int); 4264 void sqlite3VtabFinishParse(Parse*, Token*); 4265 void sqlite3VtabArgInit(Parse*); 4266 void sqlite3VtabArgExtend(Parse*, Token*); 4267 int sqlite3VtabCallCreate(sqlite3*, int, const char *, char **); 4268 int sqlite3VtabCallConnect(Parse*, Table*); 4269 int sqlite3VtabCallDestroy(sqlite3*, int, const char *); 4270 int sqlite3VtabBegin(sqlite3 *, VTable *); 4271 FuncDef *sqlite3VtabOverloadFunction(sqlite3 *,FuncDef*, int nArg, Expr*); 4272 sqlite3_int64 sqlite3StmtCurrentTime(sqlite3_context*); 4273 int sqlite3VdbeParameterIndex(Vdbe*, const char*, int); 4274 int sqlite3TransferBindings(sqlite3_stmt *, sqlite3_stmt *); 4275 void sqlite3ParserReset(Parse*); 4276 int sqlite3Reprepare(Vdbe*); 4277 void sqlite3ExprListCheckLength(Parse*, ExprList*, const char*); 4278 CollSeq *sqlite3BinaryCompareCollSeq(Parse *, Expr *, Expr *); 4279 int sqlite3TempInMemory(const sqlite3*); 4280 const char *sqlite3JournalModename(int); 4281 #ifndef SQLITE_OMIT_WAL 4282 int sqlite3Checkpoint(sqlite3*, int, int, int*, int*); 4283 int sqlite3WalDefaultHook(void*,sqlite3*,const char*,int); 4284 #endif 4285 #ifndef SQLITE_OMIT_CTE 4286 With *sqlite3WithAdd(Parse*,With*,Token*,ExprList*,Select*); 4287 void sqlite3WithDelete(sqlite3*,With*); 4288 void sqlite3WithPush(Parse*, With*, u8); 4289 #else 4290 #define sqlite3WithPush(x,y,z) 4291 #define sqlite3WithDelete(x,y) 4292 #endif 4293 #ifndef SQLITE_OMIT_UPSERT 4294 Upsert *sqlite3UpsertNew(sqlite3*,ExprList*,Expr*,ExprList*,Expr*); 4295 void sqlite3UpsertDelete(sqlite3*,Upsert*); 4296 Upsert *sqlite3UpsertDup(sqlite3*,Upsert*); 4297 int sqlite3UpsertAnalyzeTarget(Parse*,SrcList*,Upsert*); 4298 void sqlite3UpsertDoUpdate(Parse*,Upsert*,Table*,Index*,int); 4299 #else 4300 #define sqlite3UpsertNew(v,w,x,y,z) ((Upsert*)0) 4301 #define sqlite3UpsertDelete(x,y) 4302 #define sqlite3UpsertDup(x,y) ((Upsert*)0) 4303 #endif 4304 4305 4306 /* Declarations for functions in fkey.c. All of these are replaced by 4307 ** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign 4308 ** key functionality is available. If OMIT_TRIGGER is defined but 4309 ** OMIT_FOREIGN_KEY is not, only some of the functions are no-oped. In 4310 ** this case foreign keys are parsed, but no other functionality is 4311 ** provided (enforcement of FK constraints requires the triggers sub-system). 4312 */ 4313 #if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) 4314 void sqlite3FkCheck(Parse*, Table*, int, int, int*, int); 4315 void sqlite3FkDropTable(Parse*, SrcList *, Table*); 4316 void sqlite3FkActions(Parse*, Table*, ExprList*, int, int*, int); 4317 int sqlite3FkRequired(Parse*, Table*, int*, int); 4318 u32 sqlite3FkOldmask(Parse*, Table*); 4319 FKey *sqlite3FkReferences(Table *); 4320 #else 4321 #define sqlite3FkActions(a,b,c,d,e,f) 4322 #define sqlite3FkCheck(a,b,c,d,e,f) 4323 #define sqlite3FkDropTable(a,b,c) 4324 #define sqlite3FkOldmask(a,b) 0 4325 #define sqlite3FkRequired(a,b,c,d) 0 4326 #define sqlite3FkReferences(a) 0 4327 #endif 4328 #ifndef SQLITE_OMIT_FOREIGN_KEY 4329 void sqlite3FkDelete(sqlite3 *, Table*); 4330 int sqlite3FkLocateIndex(Parse*,Table*,FKey*,Index**,int**); 4331 #else 4332 #define sqlite3FkDelete(a,b) 4333 #define sqlite3FkLocateIndex(a,b,c,d,e) 4334 #endif 4335 4336 4337 /* 4338 ** Available fault injectors. Should be numbered beginning with 0. 4339 */ 4340 #define SQLITE_FAULTINJECTOR_MALLOC 0 4341 #define SQLITE_FAULTINJECTOR_COUNT 1 4342 4343 /* 4344 ** The interface to the code in fault.c used for identifying "benign" 4345 ** malloc failures. This is only present if SQLITE_UNTESTABLE 4346 ** is not defined. 4347 */ 4348 #ifndef SQLITE_UNTESTABLE 4349 void sqlite3BeginBenignMalloc(void); 4350 void sqlite3EndBenignMalloc(void); 4351 #else 4352 #define sqlite3BeginBenignMalloc() 4353 #define sqlite3EndBenignMalloc() 4354 #endif 4355 4356 /* 4357 ** Allowed return values from sqlite3FindInIndex() 4358 */ 4359 #define IN_INDEX_ROWID 1 /* Search the rowid of the table */ 4360 #define IN_INDEX_EPH 2 /* Search an ephemeral b-tree */ 4361 #define IN_INDEX_INDEX_ASC 3 /* Existing index ASCENDING */ 4362 #define IN_INDEX_INDEX_DESC 4 /* Existing index DESCENDING */ 4363 #define IN_INDEX_NOOP 5 /* No table available. Use comparisons */ 4364 /* 4365 ** Allowed flags for the 3rd parameter to sqlite3FindInIndex(). 4366 */ 4367 #define IN_INDEX_NOOP_OK 0x0001 /* OK to return IN_INDEX_NOOP */ 4368 #define IN_INDEX_MEMBERSHIP 0x0002 /* IN operator used for membership test */ 4369 #define IN_INDEX_LOOP 0x0004 /* IN operator used as a loop */ 4370 int sqlite3FindInIndex(Parse *, Expr *, u32, int*, int*); 4371 4372 int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int); 4373 int sqlite3JournalSize(sqlite3_vfs *); 4374 #if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ 4375 || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) 4376 int sqlite3JournalCreate(sqlite3_file *); 4377 #endif 4378 4379 int sqlite3JournalIsInMemory(sqlite3_file *p); 4380 void sqlite3MemJournalOpen(sqlite3_file *); 4381 4382 void sqlite3ExprSetHeightAndFlags(Parse *pParse, Expr *p); 4383 #if SQLITE_MAX_EXPR_DEPTH>0 4384 int sqlite3SelectExprHeight(Select *); 4385 int sqlite3ExprCheckHeight(Parse*, int); 4386 #else 4387 #define sqlite3SelectExprHeight(x) 0 4388 #define sqlite3ExprCheckHeight(x,y) 4389 #endif 4390 4391 u32 sqlite3Get4byte(const u8*); 4392 void sqlite3Put4byte(u8*, u32); 4393 4394 #ifdef SQLITE_ENABLE_UNLOCK_NOTIFY 4395 void sqlite3ConnectionBlocked(sqlite3 *, sqlite3 *); 4396 void sqlite3ConnectionUnlocked(sqlite3 *db); 4397 void sqlite3ConnectionClosed(sqlite3 *db); 4398 #else 4399 #define sqlite3ConnectionBlocked(x,y) 4400 #define sqlite3ConnectionUnlocked(x) 4401 #define sqlite3ConnectionClosed(x) 4402 #endif 4403 4404 #ifdef SQLITE_DEBUG 4405 void sqlite3ParserTrace(FILE*, char *); 4406 #endif 4407 #if defined(YYCOVERAGE) 4408 int sqlite3ParserCoverage(FILE*); 4409 #endif 4410 4411 /* 4412 ** If the SQLITE_ENABLE IOTRACE exists then the global variable 4413 ** sqlite3IoTrace is a pointer to a printf-like routine used to 4414 ** print I/O tracing messages. 4415 */ 4416 #ifdef SQLITE_ENABLE_IOTRACE 4417 # define IOTRACE(A) if( sqlite3IoTrace ){ sqlite3IoTrace A; } 4418 void sqlite3VdbeIOTraceSql(Vdbe*); 4419 SQLITE_API SQLITE_EXTERN void (SQLITE_CDECL *sqlite3IoTrace)(const char*,...); 4420 #else 4421 # define IOTRACE(A) 4422 # define sqlite3VdbeIOTraceSql(X) 4423 #endif 4424 4425 /* 4426 ** These routines are available for the mem2.c debugging memory allocator 4427 ** only. They are used to verify that different "types" of memory 4428 ** allocations are properly tracked by the system. 4429 ** 4430 ** sqlite3MemdebugSetType() sets the "type" of an allocation to one of 4431 ** the MEMTYPE_* macros defined below. The type must be a bitmask with 4432 ** a single bit set. 4433 ** 4434 ** sqlite3MemdebugHasType() returns true if any of the bits in its second 4435 ** argument match the type set by the previous sqlite3MemdebugSetType(). 4436 ** sqlite3MemdebugHasType() is intended for use inside assert() statements. 4437 ** 4438 ** sqlite3MemdebugNoType() returns true if none of the bits in its second 4439 ** argument match the type set by the previous sqlite3MemdebugSetType(). 4440 ** 4441 ** Perhaps the most important point is the difference between MEMTYPE_HEAP 4442 ** and MEMTYPE_LOOKASIDE. If an allocation is MEMTYPE_LOOKASIDE, that means 4443 ** it might have been allocated by lookaside, except the allocation was 4444 ** too large or lookaside was already full. It is important to verify 4445 ** that allocations that might have been satisfied by lookaside are not 4446 ** passed back to non-lookaside free() routines. Asserts such as the 4447 ** example above are placed on the non-lookaside free() routines to verify 4448 ** this constraint. 4449 ** 4450 ** All of this is no-op for a production build. It only comes into 4451 ** play when the SQLITE_MEMDEBUG compile-time option is used. 4452 */ 4453 #ifdef SQLITE_MEMDEBUG 4454 void sqlite3MemdebugSetType(void*,u8); 4455 int sqlite3MemdebugHasType(void*,u8); 4456 int sqlite3MemdebugNoType(void*,u8); 4457 #else 4458 # define sqlite3MemdebugSetType(X,Y) /* no-op */ 4459 # define sqlite3MemdebugHasType(X,Y) 1 4460 # define sqlite3MemdebugNoType(X,Y) 1 4461 #endif 4462 #define MEMTYPE_HEAP 0x01 /* General heap allocations */ 4463 #define MEMTYPE_LOOKASIDE 0x02 /* Heap that might have been lookaside */ 4464 #define MEMTYPE_PCACHE 0x04 /* Page cache allocations */ 4465 4466 /* 4467 ** Threading interface 4468 */ 4469 #if SQLITE_MAX_WORKER_THREADS>0 4470 int sqlite3ThreadCreate(SQLiteThread**,void*(*)(void*),void*); 4471 int sqlite3ThreadJoin(SQLiteThread*, void**); 4472 #endif 4473 4474 #if defined(SQLITE_ENABLE_DBPAGE_VTAB) || defined(SQLITE_TEST) 4475 int sqlite3DbpageRegister(sqlite3*); 4476 #endif 4477 #if defined(SQLITE_ENABLE_DBSTAT_VTAB) || defined(SQLITE_TEST) 4478 int sqlite3DbstatRegister(sqlite3*); 4479 #endif 4480 4481 int sqlite3ExprVectorSize(Expr *pExpr); 4482 int sqlite3ExprIsVector(Expr *pExpr); 4483 Expr *sqlite3VectorFieldSubexpr(Expr*, int); 4484 Expr *sqlite3ExprForVectorField(Parse*,Expr*,int); 4485 void sqlite3VectorErrorMsg(Parse*, Expr*); 4486 4487 #ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS 4488 const char **sqlite3CompileOptions(int *pnOpt); 4489 #endif 4490 4491 #endif /* SQLITEINT_H */ 4492