xref: /sqlite-3.40.0/src/select.c (revision 4c5ebee0)

/*
** 2001 September 15
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file contains C code routines that are called by the parser
** to handle SELECT statements in SQLite.
*/
#include "sqliteInt.h"

/*
** Trace output macros
*/
#if SELECTTRACE_ENABLED
/***/ int sqlite3SelectTrace = 0;
# define SELECTTRACE(K,P,S,X)  \
  if(sqlite3SelectTrace&(K))   \
    sqlite3DebugPrintf("%*s%s.%p: ",(P)->nSelectIndent*2-2,"",\
        (S)->zSelName,(S)),\
    sqlite3DebugPrintf X
#else
# define SELECTTRACE(K,P,S,X)
#endif


/*
** An instance of the following object is used to record information about
** how to process the DISTINCT keyword, to simplify passing that information
** into the selectInnerLoop() routine.
*/
typedef struct DistinctCtx DistinctCtx;
struct DistinctCtx {
  u8 isTnct;      /* True if the DISTINCT keyword is present */
  u8 eTnctType;   /* One of the WHERE_DISTINCT_* operators */
  int tabTnct;    /* Ephemeral table used for DISTINCT processing */
  int addrTnct;   /* Address of OP_OpenEphemeral opcode for tabTnct */
};

/*
** An instance of the following object is used to record information about
** the ORDER BY (or GROUP BY) clause of query is being coded.
*/
typedef struct SortCtx SortCtx;
struct SortCtx {
  ExprList *pOrderBy;   /* The ORDER BY (or GROUP BY clause) */
  int nOBSat;           /* Number of ORDER BY terms satisfied by indices */
  int iECursor;         /* Cursor number for the sorter */
  int regReturn;        /* Register holding block-output return address */
  int labelBkOut;       /* Start label for the block-output subroutine */
  int addrSortIndex;    /* Address of the OP_SorterOpen or OP_OpenEphemeral */
  int labelDone;        /* Jump here when done, ex: LIMIT reached */
  u8 sortFlags;         /* Zero or more SORTFLAG_* bits */
  u8 bOrderedInnerLoop; /* ORDER BY correctly sorts the inner loop */
};
#define SORTFLAG_UseSorter  0x01   /* Use SorterOpen instead of OpenEphemeral */

/*
** Delete all the content of a Select structure.  Deallocate the structure
** itself only if bFree is true.
*/
static void clearSelect(sqlite3 *db, Select *p, int bFree){
  while( p ){
    Select *pPrior = p->pPrior;
    sqlite3ExprListDelete(db, p->pEList);
    sqlite3SrcListDelete(db, p->pSrc);
    sqlite3ExprDelete(db, p->pWhere);
    sqlite3ExprListDelete(db, p->pGroupBy);
    sqlite3ExprDelete(db, p->pHaving);
    sqlite3ExprListDelete(db, p->pOrderBy);
    sqlite3ExprDelete(db, p->pLimit);
    sqlite3ExprDelete(db, p->pOffset);
    if( p->pWith ) sqlite3WithDelete(db, p->pWith);
    if( bFree ) sqlite3DbFree(db, p);
    p = pPrior;
    bFree = 1;
  }
}

/*
** Initialize a SelectDest structure.
*/
void sqlite3SelectDestInit(SelectDest *pDest, int eDest, int iParm){
  pDest->eDest = (u8)eDest;
  pDest->iSDParm = iParm;
  pDest->zAffSdst = 0;
  pDest->iSdst = 0;
  pDest->nSdst = 0;
}


/*
** Allocate a new Select structure and return a pointer to that
** structure.
*/
Select *sqlite3SelectNew(
  Parse *pParse,        /* Parsing context */
  ExprList *pEList,     /* which columns to include in the result */
  SrcList *pSrc,        /* the FROM clause -- which tables to scan */
  Expr *pWhere,         /* the WHERE clause */
  ExprList *pGroupBy,   /* the GROUP BY clause */
  Expr *pHaving,        /* the HAVING clause */
  ExprList *pOrderBy,   /* the ORDER BY clause */
  u32 selFlags,         /* Flag parameters, such as SF_Distinct */
  Expr *pLimit,         /* LIMIT value.  NULL means not used */
  Expr *pOffset         /* OFFSET value.  NULL means no offset */
){
  Select *pNew;
  Select standin;
  sqlite3 *db = pParse->db;
  pNew = sqlite3DbMallocRawNN(db, sizeof(*pNew) );
  if( pNew==0 ){
    assert( db->mallocFailed );
    pNew = &standin;
  }
  if( pEList==0 ){
    pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db,TK_ASTERISK,0));
  }
  pNew->pEList = pEList;
  pNew->op = TK_SELECT;
  pNew->selFlags = selFlags;
  pNew->iLimit = 0;
  pNew->iOffset = 0;
#if SELECTTRACE_ENABLED
  pNew->zSelName[0] = 0;
#endif
  pNew->addrOpenEphm[0] = -1;
  pNew->addrOpenEphm[1] = -1;
  pNew->nSelectRow = 0;
  if( pSrc==0 ) pSrc = sqlite3DbMallocZero(db, sizeof(*pSrc));
  pNew->pSrc = pSrc;
  pNew->pWhere = pWhere;
  pNew->pGroupBy = pGroupBy;
  pNew->pHaving = pHaving;
  pNew->pOrderBy = pOrderBy;
  pNew->pPrior = 0;
  pNew->pNext = 0;
  pNew->pLimit = pLimit;
  pNew->pOffset = pOffset;
  pNew->pWith = 0;
  assert( pOffset==0 || pLimit!=0 || pParse->nErr>0 || db->mallocFailed!=0 );
  if( db->mallocFailed ) {
    clearSelect(db, pNew, pNew!=&standin);
    pNew = 0;
  }else{
    assert( pNew->pSrc!=0 || pParse->nErr>0 );
  }
  assert( pNew!=&standin );
  return pNew;
}

#if SELECTTRACE_ENABLED
/*
** Set the name of a Select object
*/
void sqlite3SelectSetName(Select *p, const char *zName){
  if( p && zName ){
    sqlite3_snprintf(sizeof(p->zSelName), p->zSelName, "%s", zName);
  }
}
#endif


/*
** Delete the given Select structure and all of its substructures.
*/
void sqlite3SelectDelete(sqlite3 *db, Select *p){
  if( p ) clearSelect(db, p, 1);
}

/*
** Return a pointer to the right-most SELECT statement in a compound.
*/
static Select *findRightmost(Select *p){
  while( p->pNext ) p = p->pNext;
  return p;
}

/*
** Given 1 to 3 identifiers preceding the JOIN keyword, determine the
** type of join.  Return an integer constant that expresses that type
** in terms of the following bit values:
**
**     JT_INNER
**     JT_CROSS
**     JT_OUTER
**     JT_NATURAL
**     JT_LEFT
**     JT_RIGHT
**
** A full outer join is the combination of JT_LEFT and JT_RIGHT.
**
** If an illegal or unsupported join type is seen, then still return
** a join type, but put an error in the pParse structure.
*/
int sqlite3JoinType(Parse *pParse, Token *pA, Token *pB, Token *pC){
  int jointype = 0;
  Token *apAll[3];
  Token *p;
                             /*   0123456789 123456789 123456789 123 */
  static const char zKeyText[] = "naturaleftouterightfullinnercross";
  static const struct {
    u8 i;        /* Beginning of keyword text in zKeyText[] */
    u8 nChar;    /* Length of the keyword in characters */
    u8 code;     /* Join type mask */
  } aKeyword[] = {
    /* natural */ { 0,  7, JT_NATURAL                },
    /* left    */ { 6,  4, JT_LEFT|JT_OUTER          },
    /* outer   */ { 10, 5, JT_OUTER                  },
    /* right   */ { 14, 5, JT_RIGHT|JT_OUTER         },
    /* full    */ { 19, 4, JT_LEFT|JT_RIGHT|JT_OUTER },
    /* inner   */ { 23, 5, JT_INNER                  },
    /* cross   */ { 28, 5, JT_INNER|JT_CROSS         },
  };
  int i, j;
  apAll[0] = pA;
  apAll[1] = pB;
  apAll[2] = pC;
  for(i=0; i<3 && apAll[i]; i++){
    p = apAll[i];
    for(j=0; j<ArraySize(aKeyword); j++){
      if( p->n==aKeyword[j].nChar
          && sqlite3StrNICmp((char*)p->z, &zKeyText[aKeyword[j].i], p->n)==0 ){
        jointype |= aKeyword[j].code;
        break;
      }
    }
    testcase( j==0 || j==1 || j==2 || j==3 || j==4 || j==5 || j==6 );
    if( j>=ArraySize(aKeyword) ){
      jointype |= JT_ERROR;
      break;
    }
  }
  if(
     (jointype & (JT_INNER|JT_OUTER))==(JT_INNER|JT_OUTER) ||
     (jointype & JT_ERROR)!=0
  ){
    const char *zSp = " ";
    assert( pB!=0 );
    if( pC==0 ){ zSp++; }
    sqlite3ErrorMsg(pParse, "unknown or unsupported join type: "
       "%T %T%s%T", pA, pB, zSp, pC);
    jointype = JT_INNER;
  }else if( (jointype & JT_OUTER)!=0
         && (jointype & (JT_LEFT|JT_RIGHT))!=JT_LEFT ){
    sqlite3ErrorMsg(pParse,
      "RIGHT and FULL OUTER JOINs are not currently supported");
    jointype = JT_INNER;
  }
  return jointype;
}

/*
** Return the index of a column in a table.  Return -1 if the column
** is not contained in the table.
*/
static int columnIndex(Table *pTab, const char *zCol){
  int i;
  for(i=0; i<pTab->nCol; i++){
    if( sqlite3StrICmp(pTab->aCol[i].zName, zCol)==0 ) return i;
  }
  return -1;
}

/*
** Search the first N tables in pSrc, from left to right, looking for a
** table that has a column named zCol.
**
** When found, set *piTab and *piCol to the table index and column index
** of the matching column and return TRUE.
**
** If not found, return FALSE.
*/
static int tableAndColumnIndex(
  SrcList *pSrc,       /* Array of tables to search */
  int N,               /* Number of tables in pSrc->a[] to search */
  const char *zCol,    /* Name of the column we are looking for */
  int *piTab,          /* Write index of pSrc->a[] here */
  int *piCol           /* Write index of pSrc->a[*piTab].pTab->aCol[] here */
){
  int i;               /* For looping over tables in pSrc */
  int iCol;            /* Index of column matching zCol */

  assert( (piTab==0)==(piCol==0) );  /* Both or neither are NULL */
  for(i=0; i<N; i++){
    iCol = columnIndex(pSrc->a[i].pTab, zCol);
    if( iCol>=0 ){
      if( piTab ){
        *piTab = i;
        *piCol = iCol;
      }
      return 1;
    }
  }
  return 0;
}

/*
** This function is used to add terms implied by JOIN syntax to the
** WHERE clause expression of a SELECT statement. The new term, which
** is ANDed with the existing WHERE clause, is of the form:
**
**    (tab1.col1 = tab2.col2)
**
** where tab1 is the iSrc'th table in SrcList pSrc and tab2 is the
** (iSrc+1)'th. Column col1 is column iColLeft of tab1, and col2 is
** column iColRight of tab2.
*/
static void addWhereTerm(
  Parse *pParse,                  /* Parsing context */
  SrcList *pSrc,                  /* List of tables in FROM clause */
  int iLeft,                      /* Index of first table to join in pSrc */
  int iColLeft,                   /* Index of column in first table */
  int iRight,                     /* Index of second table in pSrc */
  int iColRight,                  /* Index of column in second table */
  int isOuterJoin,                /* True if this is an OUTER join */
  Expr **ppWhere                  /* IN/OUT: The WHERE clause to add to */
){
  sqlite3 *db = pParse->db;
  Expr *pE1;
  Expr *pE2;
  Expr *pEq;

  assert( iLeft<iRight );
  assert( pSrc->nSrc>iRight );
  assert( pSrc->a[iLeft].pTab );
  assert( pSrc->a[iRight].pTab );

  pE1 = sqlite3CreateColumnExpr(db, pSrc, iLeft, iColLeft);
  pE2 = sqlite3CreateColumnExpr(db, pSrc, iRight, iColRight);

  pEq = sqlite3PExpr(pParse, TK_EQ, pE1, pE2, 0);
  if( pEq && isOuterJoin ){
    ExprSetProperty(pEq, EP_FromJoin);
    assert( !ExprHasProperty(pEq, EP_TokenOnly|EP_Reduced) );
    ExprSetVVAProperty(pEq, EP_NoReduce);
    pEq->iRightJoinTable = (i16)pE2->iTable;
  }
  *ppWhere = sqlite3ExprAnd(db, *ppWhere, pEq);
}

/*
** Set the EP_FromJoin property on all terms of the given expression.
** And set the Expr.iRightJoinTable to iTable for every term in the
** expression.
**
** The EP_FromJoin property is used on terms of an expression to tell
** the LEFT OUTER JOIN processing logic that this term is part of the
** join restriction specified in the ON or USING clause and not a part
** of the more general WHERE clause.  These terms are moved over to the
** WHERE clause during join processing but we need to remember that they
** originated in the ON or USING clause.
**
** The Expr.iRightJoinTable tells the WHERE clause processing that the
** expression depends on table iRightJoinTable even if that table is not
** explicitly mentioned in the expression.  That information is needed
** for cases like this:
**
**    SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.b AND t1.x=5
**
** The where clause needs to defer the handling of the t1.x=5
** term until after the t2 loop of the join.  In that way, a
** NULL t2 row will be inserted whenever t1.x!=5.  If we do not
** defer the handling of t1.x=5, it will be processed immediately
** after the t1 loop and rows with t1.x!=5 will never appear in
** the output, which is incorrect.
*/
static void setJoinExpr(Expr *p, int iTable){
  while( p ){
    ExprSetProperty(p, EP_FromJoin);
    assert( !ExprHasProperty(p, EP_TokenOnly|EP_Reduced) );
    ExprSetVVAProperty(p, EP_NoReduce);
    p->iRightJoinTable = (i16)iTable;
    if( p->op==TK_FUNCTION && p->x.pList ){
      int i;
      for(i=0; i<p->x.pList->nExpr; i++){
        setJoinExpr(p->x.pList->a[i].pExpr, iTable);
      }
    }
    setJoinExpr(p->pLeft, iTable);
    p = p->pRight;
  }
}

/*
** This routine processes the join information for a SELECT statement.
** ON and USING clauses are converted into extra terms of the WHERE clause.
** NATURAL joins also create extra WHERE clause terms.
**
** The terms of a FROM clause are contained in the Select.pSrc structure.
** The left most table is the first entry in Select.pSrc.  The right-most
** table is the last entry.  The join operator is held in the entry to
** the left.  Thus entry 0 contains the join operator for the join between
** entries 0 and 1.  Any ON or USING clauses associated with the join are
** also attached to the left entry.
**
** This routine returns the number of errors encountered.
*/
static int sqliteProcessJoin(Parse *pParse, Select *p){
  SrcList *pSrc;                  /* All tables in the FROM clause */
  int i, j;                       /* Loop counters */
  struct SrcList_item *pLeft;     /* Left table being joined */
  struct SrcList_item *pRight;    /* Right table being joined */

  pSrc = p->pSrc;
  pLeft = &pSrc->a[0];
  pRight = &pLeft[1];
  for(i=0; i<pSrc->nSrc-1; i++, pRight++, pLeft++){
    Table *pLeftTab = pLeft->pTab;
    Table *pRightTab = pRight->pTab;
    int isOuter;

    if( NEVER(pLeftTab==0 || pRightTab==0) ) continue;
    isOuter = (pRight->fg.jointype & JT_OUTER)!=0;

    /* When the NATURAL keyword is present, add WHERE clause terms for
    ** every column that the two tables have in common.
    */
    if( pRight->fg.jointype & JT_NATURAL ){
      if( pRight->pOn || pRight->pUsing ){
        sqlite3ErrorMsg(pParse, "a NATURAL join may not have "
           "an ON or USING clause", 0);
        return 1;
      }
      for(j=0; j<pRightTab->nCol; j++){
        char *zName;   /* Name of column in the right table */
        int iLeft;     /* Matching left table */
        int iLeftCol;  /* Matching column in the left table */

        zName = pRightTab->aCol[j].zName;
        if( tableAndColumnIndex(pSrc, i+1, zName, &iLeft, &iLeftCol) ){
          addWhereTerm(pParse, pSrc, iLeft, iLeftCol, i+1, j,
                       isOuter, &p->pWhere);
        }
      }
    }

    /* Disallow both ON and USING clauses in the same join
    */
    if( pRight->pOn && pRight->pUsing ){
      sqlite3ErrorMsg(pParse, "cannot have both ON and USING "
        "clauses in the same join");
      return 1;
    }

    /* Add the ON clause to the end of the WHERE clause, connected by
    ** an AND operator.
    */
    if( pRight->pOn ){
      if( isOuter ) setJoinExpr(pRight->pOn, pRight->iCursor);
      p->pWhere = sqlite3ExprAnd(pParse->db, p->pWhere, pRight->pOn);
      pRight->pOn = 0;
    }

    /* Create extra terms on the WHERE clause for each column named
    ** in the USING clause.  Example: If the two tables to be joined are
    ** A and B and the USING clause names X, Y, and Z, then add this
    ** to the WHERE clause:    A.X=B.X AND A.Y=B.Y AND A.Z=B.Z
    ** Report an error if any column mentioned in the USING clause is
    ** not contained in both tables to be joined.
    */
    if( pRight->pUsing ){
      IdList *pList = pRight->pUsing;
      for(j=0; j<pList->nId; j++){
        char *zName;     /* Name of the term in the USING clause */
        int iLeft;       /* Table on the left with matching column name */
        int iLeftCol;    /* Column number of matching column on the left */
        int iRightCol;   /* Column number of matching column on the right */

        zName = pList->a[j].zName;
        iRightCol = columnIndex(pRightTab, zName);
        if( iRightCol<0
         || !tableAndColumnIndex(pSrc, i+1, zName, &iLeft, &iLeftCol)
        ){
          sqlite3ErrorMsg(pParse, "cannot join using column %s - column "
            "not present in both tables", zName);
          return 1;
        }
        addWhereTerm(pParse, pSrc, iLeft, iLeftCol, i+1, iRightCol,
                     isOuter, &p->pWhere);
      }
    }
  }
  return 0;
}

/* Forward reference */
static KeyInfo *keyInfoFromExprList(
  Parse *pParse,       /* Parsing context */
  ExprList *pList,     /* Form the KeyInfo object from this ExprList */
  int iStart,          /* Begin with this column of pList */
  int nExtra           /* Add this many extra columns to the end */
);

/*
** Generate code that will push the record in registers regData
** through regData+nData-1 onto the sorter.
*/
static void pushOntoSorter(
  Parse *pParse,         /* Parser context */
  SortCtx *pSort,        /* Information about the ORDER BY clause */
  Select *pSelect,       /* The whole SELECT statement */
  int regData,           /* First register holding data to be sorted */
  int regOrigData,       /* First register holding data before packing */
  int nData,             /* Number of elements in the data array */
  int nPrefixReg         /* No. of reg prior to regData available for use */
){
  Vdbe *v = pParse->pVdbe;                         /* Stmt under construction */
  int bSeq = ((pSort->sortFlags & SORTFLAG_UseSorter)==0);
  int nExpr = pSort->pOrderBy->nExpr;              /* No. of ORDER BY terms */
  int nBase = nExpr + bSeq + nData;                /* Fields in sorter record */
  int regBase;                                     /* Regs for sorter record */
  int regRecord = ++pParse->nMem;                  /* Assembled sorter record */
  int nOBSat = pSort->nOBSat;                      /* ORDER BY terms to skip */
  int op;                            /* Opcode to add sorter record to sorter */
  int iLimit;                        /* LIMIT counter */

  assert( bSeq==0 || bSeq==1 );
  assert( nData==1 || regData==regOrigData );
  if( nPrefixReg ){
    assert( nPrefixReg==nExpr+bSeq );
    regBase = regData - nExpr - bSeq;
  }else{
    regBase = pParse->nMem + 1;
    pParse->nMem += nBase;
  }
  assert( pSelect->iOffset==0 || pSelect->iLimit!=0 );
  iLimit = pSelect->iOffset ? pSelect->iOffset+1 : pSelect->iLimit;
  pSort->labelDone = sqlite3VdbeMakeLabel(v);
  sqlite3ExprCodeExprList(pParse, pSort->pOrderBy, regBase, regOrigData,
                          SQLITE_ECEL_DUP|SQLITE_ECEL_REF);
  if( bSeq ){
    sqlite3VdbeAddOp2(v, OP_Sequence, pSort->iECursor, regBase+nExpr);
  }
  if( nPrefixReg==0 ){
    sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+bSeq, nData);
  }
  sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regRecord);
  if( nOBSat>0 ){
    int regPrevKey;   /* The first nOBSat columns of the previous row */
    int addrFirst;    /* Address of the OP_IfNot opcode */
    int addrJmp;      /* Address of the OP_Jump opcode */
    VdbeOp *pOp;      /* Opcode that opens the sorter */
    int nKey;         /* Number of sorting key columns, including OP_Sequence */
    KeyInfo *pKI;     /* Original KeyInfo on the sorter table */

    regPrevKey = pParse->nMem+1;
    pParse->nMem += pSort->nOBSat;
    nKey = nExpr - pSort->nOBSat + bSeq;
    if( bSeq ){
      addrFirst = sqlite3VdbeAddOp1(v, OP_IfNot, regBase+nExpr);
    }else{
      addrFirst = sqlite3VdbeAddOp1(v, OP_SequenceTest, pSort->iECursor);
    }
    VdbeCoverage(v);
    sqlite3VdbeAddOp3(v, OP_Compare, regPrevKey, regBase, pSort->nOBSat);
    pOp = sqlite3VdbeGetOp(v, pSort->addrSortIndex);
    if( pParse->db->mallocFailed ) return;
    pOp->p2 = nKey + nData;
    pKI = pOp->p4.pKeyInfo;
    memset(pKI->aSortOrder, 0, pKI->nField); /* Makes OP_Jump below testable */
    sqlite3VdbeChangeP4(v, -1, (char*)pKI, P4_KEYINFO);
    testcase( pKI->nXField>2 );
    pOp->p4.pKeyInfo = keyInfoFromExprList(pParse, pSort->pOrderBy, nOBSat,
                                           pKI->nXField-1);
    addrJmp = sqlite3VdbeCurrentAddr(v);
    sqlite3VdbeAddOp3(v, OP_Jump, addrJmp+1, 0, addrJmp+1); VdbeCoverage(v);
    pSort->labelBkOut = sqlite3VdbeMakeLabel(v);
    pSort->regReturn = ++pParse->nMem;
    sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut);
    sqlite3VdbeAddOp1(v, OP_ResetSorter, pSort->iECursor);
    if( iLimit ){
      sqlite3VdbeAddOp2(v, OP_IfNot, iLimit, pSort->labelDone);
      VdbeCoverage(v);
    }
    sqlite3VdbeJumpHere(v, addrFirst);
    sqlite3ExprCodeMove(pParse, regBase, regPrevKey, pSort->nOBSat);
    sqlite3VdbeJumpHere(v, addrJmp);
  }
  if( pSort->sortFlags & SORTFLAG_UseSorter ){
    op = OP_SorterInsert;
  }else{
    op = OP_IdxInsert;
  }
  sqlite3VdbeAddOp2(v, op, pSort->iECursor, regRecord);
  if( iLimit ){
    int addr;
    int r1 = 0;
    /* Fill the sorter until it contains LIMIT+OFFSET entries.  (The iLimit
    ** register is initialized with value of LIMIT+OFFSET.)  After the sorter
    ** fills up, delete the least entry in the sorter after each insert.
    ** Thus we never hold more than the LIMIT+OFFSET rows in memory at once */
    addr = sqlite3VdbeAddOp3(v, OP_IfNotZero, iLimit, 0, 1); VdbeCoverage(v);
    sqlite3VdbeAddOp1(v, OP_Last, pSort->iECursor);
    if( pSort->bOrderedInnerLoop ){
      r1 = ++pParse->nMem;
      sqlite3VdbeAddOp3(v, OP_Column, pSort->iECursor, nExpr, r1);
      VdbeComment((v, "seq"));
    }
    sqlite3VdbeAddOp1(v, OP_Delete, pSort->iECursor);
    if( pSort->bOrderedInnerLoop ){
      /* If the inner loop is driven by an index such that values from
      ** the same iteration of the inner loop are in sorted order, then
      ** immediately jump to the next iteration of an inner loop if the
      ** entry from the current iteration does not fit into the top
      ** LIMIT+OFFSET entries of the sorter. */
      int iBrk = sqlite3VdbeCurrentAddr(v) + 2;
      sqlite3VdbeAddOp3(v, OP_Eq, regBase+nExpr, iBrk, r1);
      sqlite3VdbeChangeP5(v, SQLITE_NULLEQ);
      VdbeCoverage(v);
    }
    sqlite3VdbeJumpHere(v, addr);
  }
}

/*
** Add code to implement the OFFSET
*/
static void codeOffset(
  Vdbe *v,          /* Generate code into this VM */
  int iOffset,      /* Register holding the offset counter */
  int iContinue     /* Jump here to skip the current record */
){
  if( iOffset>0 ){
    sqlite3VdbeAddOp3(v, OP_IfPos, iOffset, iContinue, 1); VdbeCoverage(v);
    VdbeComment((v, "OFFSET"));
  }
}

/*
** Add code that will check to make sure the N registers starting at iMem
** form a distinct entry.  iTab is a sorting index that holds previously
** seen combinations of the N values.  A new entry is made in iTab
** if the current N values are new.
**
** A jump to addrRepeat is made and the N+1 values are popped from the
** stack if the top N elements are not distinct.
*/
static void codeDistinct(
  Parse *pParse,     /* Parsing and code generating context */
  int iTab,          /* A sorting index used to test for distinctness */
  int addrRepeat,    /* Jump to here if not distinct */
  int N,             /* Number of elements */
  int iMem           /* First element */
){
  Vdbe *v;
  int r1;

  v = pParse->pVdbe;
  r1 = sqlite3GetTempReg(pParse);
  sqlite3VdbeAddOp4Int(v, OP_Found, iTab, addrRepeat, iMem, N); VdbeCoverage(v);
  sqlite3VdbeAddOp3(v, OP_MakeRecord, iMem, N, r1);
  sqlite3VdbeAddOp2(v, OP_IdxInsert, iTab, r1);
  sqlite3ReleaseTempReg(pParse, r1);
}

/*
** This routine generates the code for the inside of the inner loop
** of a SELECT.
**
** If srcTab is negative, then the pEList expressions
** are evaluated in order to get the data for this row.  If srcTab is
** zero or more, then data is pulled from srcTab and pEList is used only
** to get number columns and the datatype for each column.
*/
static void selectInnerLoop(
  Parse *pParse,          /* The parser context */
  Select *p,              /* The complete select statement being coded */
  ExprList *pEList,       /* List of values being extracted */
  int srcTab,             /* Pull data from this table */
  SortCtx *pSort,         /* If not NULL, info on how to process ORDER BY */
  DistinctCtx *pDistinct, /* If not NULL, info on how to process DISTINCT */
  SelectDest *pDest,      /* How to dispose of the results */
  int iContinue,          /* Jump here to continue with next row */
  int iBreak              /* Jump here to break out of the inner loop */
){
  Vdbe *v = pParse->pVdbe;
  int i;
  int hasDistinct;        /* True if the DISTINCT keyword is present */
  int regResult;              /* Start of memory holding result set */
  int eDest = pDest->eDest;   /* How to dispose of results */
  int iParm = pDest->iSDParm; /* First argument to disposal method */
  int nResultCol;             /* Number of result columns */
  int nPrefixReg = 0;         /* Number of extra registers before regResult */

  assert( v );
  assert( pEList!=0 );
  hasDistinct = pDistinct ? pDistinct->eTnctType : WHERE_DISTINCT_NOOP;
  if( pSort && pSort->pOrderBy==0 ) pSort = 0;
  if( pSort==0 && !hasDistinct ){
    assert( iContinue!=0 );
    codeOffset(v, p->iOffset, iContinue);
  }

  /* Pull the requested columns.
  */
  nResultCol = pEList->nExpr;

  if( pDest->iSdst==0 ){
    if( pSort ){
      nPrefixReg = pSort->pOrderBy->nExpr;
      if( !(pSort->sortFlags & SORTFLAG_UseSorter) ) nPrefixReg++;
      pParse->nMem += nPrefixReg;
    }
    pDest->iSdst = pParse->nMem+1;
    pParse->nMem += nResultCol;
  }else if( pDest->iSdst+nResultCol > pParse->nMem ){
    /* This is an error condition that can result, for example, when a SELECT
    ** on the right-hand side of an INSERT contains more result columns than
    ** there are columns in the table on the left.  The error will be caught
    ** and reported later.  But we need to make sure enough memory is allocated
    ** to avoid other spurious errors in the meantime. */
    pParse->nMem += nResultCol;
  }
  pDest->nSdst = nResultCol;
  regResult = pDest->iSdst;
  if( srcTab>=0 ){
    for(i=0; i<nResultCol; i++){
      sqlite3VdbeAddOp3(v, OP_Column, srcTab, i, regResult+i);
      VdbeComment((v, "%s", pEList->a[i].zName));
    }
  }else if( eDest!=SRT_Exists ){
    /* If the destination is an EXISTS(...) expression, the actual
    ** values returned by the SELECT are not required.
    */
    u8 ecelFlags;
    if( eDest==SRT_Mem || eDest==SRT_Output || eDest==SRT_Coroutine ){
      ecelFlags = SQLITE_ECEL_DUP;
    }else{
      ecelFlags = 0;
    }
    sqlite3ExprCodeExprList(pParse, pEList, regResult, 0, ecelFlags);
  }

  /* If the DISTINCT keyword was present on the SELECT statement
  ** and this row has been seen before, then do not make this row
  ** part of the result.
  */
  if( hasDistinct ){
    switch( pDistinct->eTnctType ){
      case WHERE_DISTINCT_ORDERED: {
        VdbeOp *pOp;            /* No longer required OpenEphemeral instr. */
        int iJump;              /* Jump destination */
        int regPrev;            /* Previous row content */

        /* Allocate space for the previous row */
        regPrev = pParse->nMem+1;
        pParse->nMem += nResultCol;

        /* Change the OP_OpenEphemeral coded earlier to an OP_Null
        ** sets the MEM_Cleared bit on the first register of the
        ** previous value.  This will cause the OP_Ne below to always
        ** fail on the first iteration of the loop even if the first
        ** row is all NULLs.
        */
        sqlite3VdbeChangeToNoop(v, pDistinct->addrTnct);
        pOp = sqlite3VdbeGetOp(v, pDistinct->addrTnct);
        pOp->opcode = OP_Null;
        pOp->p1 = 1;
        pOp->p2 = regPrev;

        iJump = sqlite3VdbeCurrentAddr(v) + nResultCol;
        for(i=0; i<nResultCol; i++){
          CollSeq *pColl = sqlite3ExprCollSeq(pParse, pEList->a[i].pExpr);
          if( i<nResultCol-1 ){
            sqlite3VdbeAddOp3(v, OP_Ne, regResult+i, iJump, regPrev+i);
            VdbeCoverage(v);
          }else{
            sqlite3VdbeAddOp3(v, OP_Eq, regResult+i, iContinue, regPrev+i);
            VdbeCoverage(v);
           }
          sqlite3VdbeChangeP4(v, -1, (const char *)pColl, P4_COLLSEQ);
          sqlite3VdbeChangeP5(v, SQLITE_NULLEQ);
        }
        assert( sqlite3VdbeCurrentAddr(v)==iJump || pParse->db->mallocFailed );
        sqlite3VdbeAddOp3(v, OP_Copy, regResult, regPrev, nResultCol-1);
        break;
      }

      case WHERE_DISTINCT_UNIQUE: {
        sqlite3VdbeChangeToNoop(v, pDistinct->addrTnct);
        break;
      }

      default: {
        assert( pDistinct->eTnctType==WHERE_DISTINCT_UNORDERED );
        codeDistinct(pParse, pDistinct->tabTnct, iContinue, nResultCol,
                     regResult);
        break;
      }
    }
    if( pSort==0 ){
      codeOffset(v, p->iOffset, iContinue);
    }
  }

  switch( eDest ){
    /* In this mode, write each query result to the key of the temporary
    ** table iParm.
    */
#ifndef SQLITE_OMIT_COMPOUND_SELECT
    case SRT_Union: {
      int r1;
      r1 = sqlite3GetTempReg(pParse);
      sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1);
      sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1);
      sqlite3ReleaseTempReg(pParse, r1);
      break;
    }

    /* Construct a record from the query result, but instead of
    ** saving that record, use it as a key to delete elements from
    ** the temporary table iParm.
    */
    case SRT_Except: {
      sqlite3VdbeAddOp3(v, OP_IdxDelete, iParm, regResult, nResultCol);
      break;
    }
#endif /* SQLITE_OMIT_COMPOUND_SELECT */

    /* Store the result as data using a unique key.
    */
    case SRT_Fifo:
    case SRT_DistFifo:
    case SRT_Table:
    case SRT_EphemTab: {
      int r1 = sqlite3GetTempRange(pParse, nPrefixReg+1);
      testcase( eDest==SRT_Table );
      testcase( eDest==SRT_EphemTab );
      testcase( eDest==SRT_Fifo );
      testcase( eDest==SRT_DistFifo );
      sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r1+nPrefixReg);
#ifndef SQLITE_OMIT_CTE
      if( eDest==SRT_DistFifo ){
        /* If the destination is DistFifo, then cursor (iParm+1) is open
        ** on an ephemeral index. If the current row is already present
        ** in the index, do not write it to the output. If not, add the
        ** current row to the index and proceed with writing it to the
        ** output table as well.  */
        int addr = sqlite3VdbeCurrentAddr(v) + 4;
        sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, addr, r1, 0);
        VdbeCoverage(v);
        sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm+1, r1);
        assert( pSort==0 );
      }
#endif
      if( pSort ){
        pushOntoSorter(pParse, pSort, p, r1+nPrefixReg,regResult,1,nPrefixReg);
      }else{
        int r2 = sqlite3GetTempReg(pParse);
        sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, r2);
        sqlite3VdbeAddOp3(v, OP_Insert, iParm, r1, r2);
        sqlite3VdbeChangeP5(v, OPFLAG_APPEND);
        sqlite3ReleaseTempReg(pParse, r2);
      }
      sqlite3ReleaseTempRange(pParse, r1, nPrefixReg+1);
      break;
    }

#ifndef SQLITE_OMIT_SUBQUERY
    /* If we are creating a set for an "expr IN (SELECT ...)" construct,
    ** then there should be a single item on the stack.  Write this
    ** item into the set table with bogus data.
    */
    case SRT_Set: {
      if( pSort ){
        /* At first glance you would think we could optimize out the
        ** ORDER BY in this case since the order of entries in the set
        ** does not matter.  But there might be a LIMIT clause, in which
        ** case the order does matter */
        pushOntoSorter(
            pParse, pSort, p, regResult, regResult, nResultCol, nPrefixReg);
      }else{
        int r1 = sqlite3GetTempReg(pParse);
        assert( sqlite3Strlen30(pDest->zAffSdst)==nResultCol );
        sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult, nResultCol,
            r1, pDest->zAffSdst, nResultCol);
        sqlite3ExprCacheAffinityChange(pParse, regResult, nResultCol);
        sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1);
        sqlite3ReleaseTempReg(pParse, r1);
      }
      break;
    }

    /* If any row exist in the result set, record that fact and abort.
    */
    case SRT_Exists: {
      sqlite3VdbeAddOp2(v, OP_Integer, 1, iParm);
      /* The LIMIT clause will terminate the loop for us */
      break;
    }

    /* If this is a scalar select that is part of an expression, then
    ** store the results in the appropriate memory cell or array of
    ** memory cells and break out of the scan loop.
    */
    case SRT_Mem: {
      assert( nResultCol==pDest->nSdst );
      if( pSort ){
        pushOntoSorter(
            pParse, pSort, p, regResult, regResult, nResultCol, nPrefixReg);
      }else{
        assert( regResult==iParm );
        /* The LIMIT clause will jump out of the loop for us */
      }
      break;
    }
#endif /* #ifndef SQLITE_OMIT_SUBQUERY */

    case SRT_Coroutine:       /* Send data to a co-routine */
    case SRT_Output: {        /* Return the results */
      testcase( eDest==SRT_Coroutine );
      testcase( eDest==SRT_Output );
      if( pSort ){
        pushOntoSorter(pParse, pSort, p, regResult, regResult, nResultCol,
                       nPrefixReg);
      }else if( eDest==SRT_Coroutine ){
        sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm);
      }else{
        sqlite3VdbeAddOp2(v, OP_ResultRow, regResult, nResultCol);
        sqlite3ExprCacheAffinityChange(pParse, regResult, nResultCol);
      }
      break;
    }

#ifndef SQLITE_OMIT_CTE
    /* Write the results into a priority queue that is order according to
    ** pDest->pOrderBy (in pSO).  pDest->iSDParm (in iParm) is the cursor for an
    ** index with pSO->nExpr+2 columns.  Build a key using pSO for the first
    ** pSO->nExpr columns, then make sure all keys are unique by adding a
    ** final OP_Sequence column.  The last column is the record as a blob.
    */
    case SRT_DistQueue:
    case SRT_Queue: {
      int nKey;
      int r1, r2, r3;
      int addrTest = 0;
      ExprList *pSO;
      pSO = pDest->pOrderBy;
      assert( pSO );
      nKey = pSO->nExpr;
      r1 = sqlite3GetTempReg(pParse);
      r2 = sqlite3GetTempRange(pParse, nKey+2);
      r3 = r2+nKey+1;
      if( eDest==SRT_DistQueue ){
        /* If the destination is DistQueue, then cursor (iParm+1) is open
        ** on a second ephemeral index that holds all values every previously
        ** added to the queue. */
        addrTest = sqlite3VdbeAddOp4Int(v, OP_Found, iParm+1, 0,
                                        regResult, nResultCol);
        VdbeCoverage(v);
      }
      sqlite3VdbeAddOp3(v, OP_MakeRecord, regResult, nResultCol, r3);
      if( eDest==SRT_DistQueue ){
        sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm+1, r3);
        sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT);
      }
      for(i=0; i<nKey; i++){
        sqlite3VdbeAddOp2(v, OP_SCopy,
                          regResult + pSO->a[i].u.x.iOrderByCol - 1,
                          r2+i);
      }
      sqlite3VdbeAddOp2(v, OP_Sequence, iParm, r2+nKey);
      sqlite3VdbeAddOp3(v, OP_MakeRecord, r2, nKey+2, r1);
      sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, r1);
      if( addrTest ) sqlite3VdbeJumpHere(v, addrTest);
      sqlite3ReleaseTempReg(pParse, r1);
      sqlite3ReleaseTempRange(pParse, r2, nKey+2);
      break;
    }
#endif /* SQLITE_OMIT_CTE */



#if !defined(SQLITE_OMIT_TRIGGER)
    /* Discard the results.  This is used for SELECT statements inside
    ** the body of a TRIGGER.  The purpose of such selects is to call
    ** user-defined functions that have side effects.  We do not care
    ** about the actual results of the select.
    */
    default: {
      assert( eDest==SRT_Discard );
      break;
    }
#endif
  }

  /* Jump to the end of the loop if the LIMIT is reached.  Except, if
  ** there is a sorter, in which case the sorter has already limited
  ** the output for us.
  */
  if( pSort==0 && p->iLimit ){
    sqlite3VdbeAddOp2(v, OP_DecrJumpZero, p->iLimit, iBreak); VdbeCoverage(v);
  }
}

/*
** Allocate a KeyInfo object sufficient for an index of N key columns and
** X extra columns.
*/
KeyInfo *sqlite3KeyInfoAlloc(sqlite3 *db, int N, int X){
  int nExtra = (N+X)*(sizeof(CollSeq*)+1);
  KeyInfo *p = sqlite3DbMallocRaw(db, sizeof(KeyInfo) + nExtra);
  if( p ){
    p->aSortOrder = (u8*)&p->aColl[N+X];
    p->nField = (u16)N;
    p->nXField = (u16)X;
    p->enc = ENC(db);
    p->db = db;
    p->nRef = 1;
    memset(&p[1], 0, nExtra);
  }else{
    sqlite3OomFault(db);
  }
  return p;
}

/*
** Deallocate a KeyInfo object
*/
void sqlite3KeyInfoUnref(KeyInfo *p){
  if( p ){
    assert( p->nRef>0 );
    p->nRef--;
    if( p->nRef==0 ) sqlite3DbFree(p->db, p);
  }
}

/*
** Make a new pointer to a KeyInfo object
*/
KeyInfo *sqlite3KeyInfoRef(KeyInfo *p){
  if( p ){
    assert( p->nRef>0 );
    p->nRef++;
  }
  return p;
}

#ifdef SQLITE_DEBUG
/*
** Return TRUE if a KeyInfo object can be change.  The KeyInfo object
** can only be changed if this is just a single reference to the object.
**
** This routine is used only inside of assert() statements.
*/
int sqlite3KeyInfoIsWriteable(KeyInfo *p){ return p->nRef==1; }
#endif /* SQLITE_DEBUG */

/*
** Given an expression list, generate a KeyInfo structure that records
** the collating sequence for each expression in that expression list.
**
** If the ExprList is an ORDER BY or GROUP BY clause then the resulting
** KeyInfo structure is appropriate for initializing a virtual index to
** implement that clause.  If the ExprList is the result set of a SELECT
** then the KeyInfo structure is appropriate for initializing a virtual
** index to implement a DISTINCT test.
**
** Space to hold the KeyInfo structure is obtained from malloc.  The calling
** function is responsible for seeing that this structure is eventually
** freed.
*/
static KeyInfo *keyInfoFromExprList(
  Parse *pParse,       /* Parsing context */
  ExprList *pList,     /* Form the KeyInfo object from this ExprList */
  int iStart,          /* Begin with this column of pList */
  int nExtra           /* Add this many extra columns to the end */
){
  int nExpr;
  KeyInfo *pInfo;
  struct ExprList_item *pItem;
  sqlite3 *db = pParse->db;
  int i;

  nExpr = pList->nExpr;
  pInfo = sqlite3KeyInfoAlloc(db, nExpr-iStart, nExtra+1);
  if( pInfo ){
    assert( sqlite3KeyInfoIsWriteable(pInfo) );
    for(i=iStart, pItem=pList->a+iStart; i<nExpr; i++, pItem++){
      CollSeq *pColl;
      pColl = sqlite3ExprCollSeq(pParse, pItem->pExpr);
      if( !pColl ) pColl = db->pDfltColl;
      pInfo->aColl[i-iStart] = pColl;
      pInfo->aSortOrder[i-iStart] = pItem->sortOrder;
    }
  }
  return pInfo;
}

/*
** Name of the connection operator, used for error messages.
*/
static const char *selectOpName(int id){
  char *z;
  switch( id ){
    case TK_ALL:       z = "UNION ALL";   break;
    case TK_INTERSECT: z = "INTERSECT";   break;
    case TK_EXCEPT:    z = "EXCEPT";      break;
    default:           z = "UNION";       break;
  }
  return z;
}

#ifndef SQLITE_OMIT_EXPLAIN
/*
** Unless an "EXPLAIN QUERY PLAN" command is being processed, this function
** is a no-op. Otherwise, it adds a single row of output to the EQP result,
** where the caption is of the form:
**
**   "USE TEMP B-TREE FOR xxx"
**
** where xxx is one of "DISTINCT", "ORDER BY" or "GROUP BY". Exactly which
** is determined by the zUsage argument.
*/
static void explainTempTable(Parse *pParse, const char *zUsage){
  if( pParse->explain==2 ){
    Vdbe *v = pParse->pVdbe;
    char *zMsg = sqlite3MPrintf(pParse->db, "USE TEMP B-TREE FOR %s", zUsage);
    sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC);
  }
}

/*
** Assign expression b to lvalue a. A second, no-op, version of this macro
** is provided when SQLITE_OMIT_EXPLAIN is defined. This allows the code
** in sqlite3Select() to assign values to structure member variables that
** only exist if SQLITE_OMIT_EXPLAIN is not defined without polluting the
** code with #ifndef directives.
*/
# define explainSetInteger(a, b) a = b

#else
/* No-op versions of the explainXXX() functions and macros. */
# define explainTempTable(y,z)
# define explainSetInteger(y,z)
#endif

#if !defined(SQLITE_OMIT_EXPLAIN) && !defined(SQLITE_OMIT_COMPOUND_SELECT)
/*
** Unless an "EXPLAIN QUERY PLAN" command is being processed, this function
** is a no-op. Otherwise, it adds a single row of output to the EQP result,
** where the caption is of one of the two forms:
**
**   "COMPOSITE SUBQUERIES iSub1 and iSub2 (op)"
**   "COMPOSITE SUBQUERIES iSub1 and iSub2 USING TEMP B-TREE (op)"
**
** where iSub1 and iSub2 are the integers passed as the corresponding
** function parameters, and op is the text representation of the parameter
** of the same name. The parameter "op" must be one of TK_UNION, TK_EXCEPT,
** TK_INTERSECT or TK_ALL. The first form is used if argument bUseTmp is
** false, or the second form if it is true.
*/
static void explainComposite(
  Parse *pParse,                  /* Parse context */
  int op,                         /* One of TK_UNION, TK_EXCEPT etc. */
  int iSub1,                      /* Subquery id 1 */
  int iSub2,                      /* Subquery id 2 */
  int bUseTmp                     /* True if a temp table was used */
){
  assert( op==TK_UNION || op==TK_EXCEPT || op==TK_INTERSECT || op==TK_ALL );
  if( pParse->explain==2 ){
    Vdbe *v = pParse->pVdbe;
    char *zMsg = sqlite3MPrintf(
        pParse->db, "COMPOUND SUBQUERIES %d AND %d %s(%s)", iSub1, iSub2,
        bUseTmp?"USING TEMP B-TREE ":"", selectOpName(op)
    );
    sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC);
  }
}
#else
/* No-op versions of the explainXXX() functions and macros. */
# define explainComposite(v,w,x,y,z)
#endif

/*
** If the inner loop was generated using a non-null pOrderBy argument,
** then the results were placed in a sorter.  After the loop is terminated
** we need to run the sorter and output the results.  The following
** routine generates the code needed to do that.
*/
static void generateSortTail(
  Parse *pParse,    /* Parsing context */
  Select *p,        /* The SELECT statement */
  SortCtx *pSort,   /* Information on the ORDER BY clause */
  int nColumn,      /* Number of columns of data */
  SelectDest *pDest /* Write the sorted results here */
){
  Vdbe *v = pParse->pVdbe;                     /* The prepared statement */
  int addrBreak = pSort->labelDone;            /* Jump here to exit loop */
  int addrContinue = sqlite3VdbeMakeLabel(v);  /* Jump here for next cycle */
  int addr;
  int addrOnce = 0;
  int iTab;
  ExprList *pOrderBy = pSort->pOrderBy;
  int eDest = pDest->eDest;
  int iParm = pDest->iSDParm;
  int regRow;
  int regRowid;
  int nKey;
  int iSortTab;                   /* Sorter cursor to read from */
  int nSortData;                  /* Trailing values to read from sorter */
  int i;
  int bSeq;                       /* True if sorter record includes seq. no. */
#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS
  struct ExprList_item *aOutEx = p->pEList->a;
#endif

  assert( addrBreak<0 );
  if( pSort->labelBkOut ){
    sqlite3VdbeAddOp2(v, OP_Gosub, pSort->regReturn, pSort->labelBkOut);
    sqlite3VdbeGoto(v, addrBreak);
    sqlite3VdbeResolveLabel(v, pSort->labelBkOut);
  }
  iTab = pSort->iECursor;
  if( eDest==SRT_Output || eDest==SRT_Coroutine || eDest==SRT_Mem ){
    regRowid = 0;
    regRow = pDest->iSdst;
    nSortData = nColumn;
  }else{
    regRowid = sqlite3GetTempReg(pParse);
    regRow = sqlite3GetTempRange(pParse, nColumn);
    nSortData = nColumn;
  }
  nKey = pOrderBy->nExpr - pSort->nOBSat;
  if( pSort->sortFlags & SORTFLAG_UseSorter ){
    int regSortOut = ++pParse->nMem;
    iSortTab = pParse->nTab++;
    if( pSort->labelBkOut ){
      addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
    }
    sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, nKey+1+nSortData);
    if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce);
    addr = 1 + sqlite3VdbeAddOp2(v, OP_SorterSort, iTab, addrBreak);
    VdbeCoverage(v);
    codeOffset(v, p->iOffset, addrContinue);
    sqlite3VdbeAddOp3(v, OP_SorterData, iTab, regSortOut, iSortTab);
    bSeq = 0;
  }else{
    addr = 1 + sqlite3VdbeAddOp2(v, OP_Sort, iTab, addrBreak); VdbeCoverage(v);
    codeOffset(v, p->iOffset, addrContinue);
    iSortTab = iTab;
    bSeq = 1;
  }
  for(i=0; i<nSortData; i++){
    sqlite3VdbeAddOp3(v, OP_Column, iSortTab, nKey+bSeq+i, regRow+i);
    VdbeComment((v, "%s", aOutEx[i].zName ? aOutEx[i].zName : aOutEx[i].zSpan));
  }
  switch( eDest ){
    case SRT_EphemTab: {
      sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, regRowid);
      sqlite3VdbeAddOp3(v, OP_Insert, iParm, regRow, regRowid);
      sqlite3VdbeChangeP5(v, OPFLAG_APPEND);
      break;
    }
#ifndef SQLITE_OMIT_SUBQUERY
    case SRT_Set: {
      assert( nColumn==sqlite3Strlen30(pDest->zAffSdst) );
      sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, nColumn, regRowid,
                        pDest->zAffSdst, nColumn);
      sqlite3ExprCacheAffinityChange(pParse, regRow, nColumn);
      sqlite3VdbeAddOp2(v, OP_IdxInsert, iParm, regRowid);
      break;
    }
    case SRT_Mem: {
      /* The LIMIT clause will terminate the loop for us */
      break;
    }
#endif
    default: {
      assert( eDest==SRT_Output || eDest==SRT_Coroutine );
      testcase( eDest==SRT_Output );
      testcase( eDest==SRT_Coroutine );
      if( eDest==SRT_Output ){
        sqlite3VdbeAddOp2(v, OP_ResultRow, pDest->iSdst, nColumn);
        sqlite3ExprCacheAffinityChange(pParse, pDest->iSdst, nColumn);
      }else{
        sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm);
      }
      break;
    }
  }
  if( regRowid ){
    if( eDest==SRT_Set ){
      sqlite3ReleaseTempRange(pParse, regRow, nColumn);
    }else{
      sqlite3ReleaseTempReg(pParse, regRow);
    }
    sqlite3ReleaseTempReg(pParse, regRowid);
  }
  /* The bottom of the loop
  */
  sqlite3VdbeResolveLabel(v, addrContinue);
  if( pSort->sortFlags & SORTFLAG_UseSorter ){
    sqlite3VdbeAddOp2(v, OP_SorterNext, iTab, addr); VdbeCoverage(v);
  }else{
    sqlite3VdbeAddOp2(v, OP_Next, iTab, addr); VdbeCoverage(v);
  }
  if( pSort->regReturn ) sqlite3VdbeAddOp1(v, OP_Return, pSort->regReturn);
  sqlite3VdbeResolveLabel(v, addrBreak);
}

/*
** Return a pointer to a string containing the 'declaration type' of the
** expression pExpr. The string may be treated as static by the caller.
**
** Also try to estimate the size of the returned value and return that
** result in *pEstWidth.
**
** The declaration type is the exact datatype definition extracted from the
** original CREATE TABLE statement if the expression is a column. The
** declaration type for a ROWID field is INTEGER. Exactly when an expression
** is considered a column can be complex in the presence of subqueries. The
** result-set expression in all of the following SELECT statements is
** considered a column by this function.
**
**   SELECT col FROM tbl;
**   SELECT (SELECT col FROM tbl;
**   SELECT (SELECT col FROM tbl);
**   SELECT abc FROM (SELECT col AS abc FROM tbl);
**
** The declaration type for any expression other than a column is NULL.
**
** This routine has either 3 or 6 parameters depending on whether or not
** the SQLITE_ENABLE_COLUMN_METADATA compile-time option is used.
*/
#ifdef SQLITE_ENABLE_COLUMN_METADATA
# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,C,D,E,F)
#else /* if !defined(SQLITE_ENABLE_COLUMN_METADATA) */
# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,F)
#endif
static const char *columnTypeImpl(
  NameContext *pNC,
  Expr *pExpr,
#ifdef SQLITE_ENABLE_COLUMN_METADATA
  const char **pzOrigDb,
  const char **pzOrigTab,
  const char **pzOrigCol,
#endif
  u8 *pEstWidth
){
  char const *zType = 0;
  int j;
  u8 estWidth = 1;
#ifdef SQLITE_ENABLE_COLUMN_METADATA
  char const *zOrigDb = 0;
  char const *zOrigTab = 0;
  char const *zOrigCol = 0;
#endif

  assert( pExpr!=0 );
  assert( pNC->pSrcList!=0 );
  switch( pExpr->op ){
    case TK_AGG_COLUMN:
    case TK_COLUMN: {
      /* The expression is a column. Locate the table the column is being
      ** extracted from in NameContext.pSrcList. This table may be real
      ** database table or a subquery.
      */
      Table *pTab = 0;            /* Table structure column is extracted from */
      Select *pS = 0;             /* Select the column is extracted from */
      int iCol = pExpr->iColumn;  /* Index of column in pTab */
      testcase( pExpr->op==TK_AGG_COLUMN );
      testcase( pExpr->op==TK_COLUMN );
      while( pNC && !pTab ){
        SrcList *pTabList = pNC->pSrcList;
        for(j=0;j<pTabList->nSrc && pTabList->a[j].iCursor!=pExpr->iTable;j++);
        if( j<pTabList->nSrc ){
          pTab = pTabList->a[j].pTab;
          pS = pTabList->a[j].pSelect;
        }else{
          pNC = pNC->pNext;
        }
      }

      if( pTab==0 ){
        /* At one time, code such as "SELECT new.x" within a trigger would
        ** cause this condition to run.  Since then, we have restructured how
        ** trigger code is generated and so this condition is no longer
        ** possible. However, it can still be true for statements like
        ** the following:
        **
        **   CREATE TABLE t1(col INTEGER);
        **   SELECT (SELECT t1.col) FROM FROM t1;
        **
        ** when columnType() is called on the expression "t1.col" in the
        ** sub-select. In this case, set the column type to NULL, even
        ** though it should really be "INTEGER".
        **
        ** This is not a problem, as the column type of "t1.col" is never
        ** used. When columnType() is called on the expression
        ** "(SELECT t1.col)", the correct type is returned (see the TK_SELECT
        ** branch below.  */
        break;
      }

      assert( pTab && pExpr->pTab==pTab );
      if( pS ){
        /* The "table" is actually a sub-select or a view in the FROM clause
        ** of the SELECT statement. Return the declaration type and origin
        ** data for the result-set column of the sub-select.
        */
        if( iCol>=0 && ALWAYS(iCol<pS->pEList->nExpr) ){
          /* If iCol is less than zero, then the expression requests the
          ** rowid of the sub-select or view. This expression is legal (see
          ** test case misc2.2.2) - it always evaluates to NULL.
          **
          ** The ALWAYS() is because iCol>=pS->pEList->nExpr will have been
          ** caught already by name resolution.
          */
          NameContext sNC;
          Expr *p = pS->pEList->a[iCol].pExpr;
          sNC.pSrcList = pS->pSrc;
          sNC.pNext = pNC;
          sNC.pParse = pNC->pParse;
          zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol, &estWidth);
        }
      }else if( pTab->pSchema ){
        /* A real table */
        assert( !pS );
        if( iCol<0 ) iCol = pTab->iPKey;
        assert( iCol==-1 || (iCol>=0 && iCol<pTab->nCol) );
#ifdef SQLITE_ENABLE_COLUMN_METADATA
        if( iCol<0 ){
          zType = "INTEGER";
          zOrigCol = "rowid";
        }else{
          zOrigCol = pTab->aCol[iCol].zName;
          zType = sqlite3ColumnType(&pTab->aCol[iCol],0);
          estWidth = pTab->aCol[iCol].szEst;
        }
        zOrigTab = pTab->zName;
        if( pNC->pParse ){
          int iDb = sqlite3SchemaToIndex(pNC->pParse->db, pTab->pSchema);
          zOrigDb = pNC->pParse->db->aDb[iDb].zDbSName;
        }
#else
        if( iCol<0 ){
          zType = "INTEGER";
        }else{
          zType = sqlite3ColumnType(&pTab->aCol[iCol],0);
          estWidth = pTab->aCol[iCol].szEst;
        }
#endif
      }
      break;
    }
#ifndef SQLITE_OMIT_SUBQUERY
    case TK_SELECT: {
      /* The expression is a sub-select. Return the declaration type and
      ** origin info for the single column in the result set of the SELECT
      ** statement.
      */
      NameContext sNC;
      Select *pS = pExpr->x.pSelect;
      Expr *p = pS->pEList->a[0].pExpr;
      assert( ExprHasProperty(pExpr, EP_xIsSelect) );
      sNC.pSrcList = pS->pSrc;
      sNC.pNext = pNC;
      sNC.pParse = pNC->pParse;
      zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, &estWidth);
      break;
    }
#endif
  }

#ifdef SQLITE_ENABLE_COLUMN_METADATA
  if( pzOrigDb ){
    assert( pzOrigTab && pzOrigCol );
    *pzOrigDb = zOrigDb;
    *pzOrigTab = zOrigTab;
    *pzOrigCol = zOrigCol;
  }
#endif
  if( pEstWidth ) *pEstWidth = estWidth;
  return zType;
}

/*
** Generate code that will tell the VDBE the declaration types of columns
** in the result set.
*/
static void generateColumnTypes(
  Parse *pParse,      /* Parser context */
  SrcList *pTabList,  /* List of tables */
  ExprList *pEList    /* Expressions defining the result set */
){
#ifndef SQLITE_OMIT_DECLTYPE
  Vdbe *v = pParse->pVdbe;
  int i;
  NameContext sNC;
  sNC.pSrcList = pTabList;
  sNC.pParse = pParse;
  for(i=0; i<pEList->nExpr; i++){
    Expr *p = pEList->a[i].pExpr;
    const char *zType;
#ifdef SQLITE_ENABLE_COLUMN_METADATA
    const char *zOrigDb = 0;
    const char *zOrigTab = 0;
    const char *zOrigCol = 0;
    zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, 0);

    /* The vdbe must make its own copy of the column-type and other
    ** column specific strings, in case the schema is reset before this
    ** virtual machine is deleted.
    */
    sqlite3VdbeSetColName(v, i, COLNAME_DATABASE, zOrigDb, SQLITE_TRANSIENT);
    sqlite3VdbeSetColName(v, i, COLNAME_TABLE, zOrigTab, SQLITE_TRANSIENT);
    sqlite3VdbeSetColName(v, i, COLNAME_COLUMN, zOrigCol, SQLITE_TRANSIENT);
#else
    zType = columnType(&sNC, p, 0, 0, 0, 0);
#endif
    sqlite3VdbeSetColName(v, i, COLNAME_DECLTYPE, zType, SQLITE_TRANSIENT);
  }
#endif /* !defined(SQLITE_OMIT_DECLTYPE) */
}

/*
** Generate code that will tell the VDBE the names of columns
** in the result set.  This information is used to provide the
** azCol[] values in the callback.
*/
static void generateColumnNames(
  Parse *pParse,      /* Parser context */
  SrcList *pTabList,  /* List of tables */
  ExprList *pEList    /* Expressions defining the result set */
){
  Vdbe *v = pParse->pVdbe;
  int i, j;
  sqlite3 *db = pParse->db;
  int fullNames, shortNames;

#ifndef SQLITE_OMIT_EXPLAIN
  /* If this is an EXPLAIN, skip this step */
  if( pParse->explain ){
    return;
  }
#endif

  if( pParse->colNamesSet || db->mallocFailed ) return;
  assert( v!=0 );
  assert( pTabList!=0 );
  pParse->colNamesSet = 1;
  fullNames = (db->flags & SQLITE_FullColNames)!=0;
  shortNames = (db->flags & SQLITE_ShortColNames)!=0;
  sqlite3VdbeSetNumCols(v, pEList->nExpr);
  for(i=0; i<pEList->nExpr; i++){
    Expr *p;
    p = pEList->a[i].pExpr;
    if( NEVER(p==0) ) continue;
    if( pEList->a[i].zName ){
      char *zName = pEList->a[i].zName;
      sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_TRANSIENT);
    }else if( p->op==TK_COLUMN || p->op==TK_AGG_COLUMN ){
      Table *pTab;
      char *zCol;
      int iCol = p->iColumn;
      for(j=0; ALWAYS(j<pTabList->nSrc); j++){
        if( pTabList->a[j].iCursor==p->iTable ) break;
      }
      assert( j<pTabList->nSrc );
      pTab = pTabList->a[j].pTab;
      if( iCol<0 ) iCol = pTab->iPKey;
      assert( iCol==-1 || (iCol>=0 && iCol<pTab->nCol) );
      if( iCol<0 ){
        zCol = "rowid";
      }else{
        zCol = pTab->aCol[iCol].zName;
      }
      if( !shortNames && !fullNames ){
        sqlite3VdbeSetColName(v, i, COLNAME_NAME,
            sqlite3DbStrDup(db, pEList->a[i].zSpan), SQLITE_DYNAMIC);
      }else if( fullNames ){
        char *zName = 0;
        zName = sqlite3MPrintf(db, "%s.%s", pTab->zName, zCol);
        sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_DYNAMIC);
      }else{
        sqlite3VdbeSetColName(v, i, COLNAME_NAME, zCol, SQLITE_TRANSIENT);
      }
    }else{
      const char *z = pEList->a[i].zSpan;
      z = z==0 ? sqlite3MPrintf(db, "column%d", i+1) : sqlite3DbStrDup(db, z);
      sqlite3VdbeSetColName(v, i, COLNAME_NAME, z, SQLITE_DYNAMIC);
    }
  }
  generateColumnTypes(pParse, pTabList, pEList);
}

/*
** Given an expression list (which is really the list of expressions
** that form the result set of a SELECT statement) compute appropriate
** column names for a table that would hold the expression list.
**
** All column names will be unique.
**
** Only the column names are computed.  Column.zType, Column.zColl,
** and other fields of Column are zeroed.
**
** Return SQLITE_OK on success.  If a memory allocation error occurs,
** store NULL in *paCol and 0 in *pnCol and return SQLITE_NOMEM.
*/
int sqlite3ColumnsFromExprList(
  Parse *pParse,          /* Parsing context */
  ExprList *pEList,       /* Expr list from which to derive column names */
  i16 *pnCol,             /* Write the number of columns here */
  Column **paCol          /* Write the new column list here */
){
  sqlite3 *db = pParse->db;   /* Database connection */
  int i, j;                   /* Loop counters */
  u32 cnt;                    /* Index added to make the name unique */
  Column *aCol, *pCol;        /* For looping over result columns */
  int nCol;                   /* Number of columns in the result set */
  Expr *p;                    /* Expression for a single result column */
  char *zName;                /* Column name */
  int nName;                  /* Size of name in zName[] */
  Hash ht;                    /* Hash table of column names */

  sqlite3HashInit(&ht);
  if( pEList ){
    nCol = pEList->nExpr;
    aCol = sqlite3DbMallocZero(db, sizeof(aCol[0])*nCol);
    testcase( aCol==0 );
  }else{
    nCol = 0;
    aCol = 0;
  }
  assert( nCol==(i16)nCol );
  *pnCol = nCol;
  *paCol = aCol;

  for(i=0, pCol=aCol; i<nCol && !db->mallocFailed; i++, pCol++){
    /* Get an appropriate name for the column
    */
    p = sqlite3ExprSkipCollate(pEList->a[i].pExpr);
    if( (zName = pEList->a[i].zName)!=0 ){
      /* If the column contains an "AS <name>" phrase, use <name> as the name */
    }else{
      Expr *pColExpr = p;  /* The expression that is the result column name */
      Table *pTab;         /* Table associated with this expression */
      while( pColExpr->op==TK_DOT ){
        pColExpr = pColExpr->pRight;
        assert( pColExpr!=0 );
      }
      if( pColExpr->op==TK_COLUMN && ALWAYS(pColExpr->pTab!=0) ){
        /* For columns use the column name name */
        int iCol = pColExpr->iColumn;
        pTab = pColExpr->pTab;
        if( iCol<0 ) iCol = pTab->iPKey;
        zName = iCol>=0 ? pTab->aCol[iCol].zName : "rowid";
      }else if( pColExpr->op==TK_ID ){
        assert( !ExprHasProperty(pColExpr, EP_IntValue) );
        zName = pColExpr->u.zToken;
      }else{
        /* Use the original text of the column expression as its name */
        zName = pEList->a[i].zSpan;
      }
    }
    zName = sqlite3MPrintf(db, "%s", zName);

    /* Make sure the column name is unique.  If the name is not unique,
    ** append an integer to the name so that it becomes unique.
    */
    cnt = 0;
    while( zName && sqlite3HashFind(&ht, zName)!=0 ){
      nName = sqlite3Strlen30(zName);
      if( nName>0 ){
        for(j=nName-1; j>0 && sqlite3Isdigit(zName[j]); j--){}
        if( zName[j]==':' ) nName = j;
      }
      zName = sqlite3MPrintf(db, "%.*z:%u", nName, zName, ++cnt);
      if( cnt>3 ) sqlite3_randomness(sizeof(cnt), &cnt);
    }
    pCol->zName = zName;
    sqlite3ColumnPropertiesFromName(0, pCol);
    if( zName && sqlite3HashInsert(&ht, zName, pCol)==pCol ){
      sqlite3OomFault(db);
    }
  }
  sqlite3HashClear(&ht);
  if( db->mallocFailed ){
    for(j=0; j<i; j++){
      sqlite3DbFree(db, aCol[j].zName);
    }
    sqlite3DbFree(db, aCol);
    *paCol = 0;
    *pnCol = 0;
    return SQLITE_NOMEM_BKPT;
  }
  return SQLITE_OK;
}

/*
** Add type and collation information to a column list based on
** a SELECT statement.
**
** The column list presumably came from selectColumnNamesFromExprList().
** The column list has only names, not types or collations.  This
** routine goes through and adds the types and collations.
**
** This routine requires that all identifiers in the SELECT
** statement be resolved.
*/
void sqlite3SelectAddColumnTypeAndCollation(
  Parse *pParse,        /* Parsing contexts */
  Table *pTab,          /* Add column type information to this table */
  Select *pSelect       /* SELECT used to determine types and collations */
){
  sqlite3 *db = pParse->db;
  NameContext sNC;
  Column *pCol;
  CollSeq *pColl;
  int i;
  Expr *p;
  struct ExprList_item *a;
  u64 szAll = 0;

  assert( pSelect!=0 );
  assert( (pSelect->selFlags & SF_Resolved)!=0 );
  assert( pTab->nCol==pSelect->pEList->nExpr || db->mallocFailed );
  if( db->mallocFailed ) return;
  memset(&sNC, 0, sizeof(sNC));
  sNC.pSrcList = pSelect->pSrc;
  a = pSelect->pEList->a;
  for(i=0, pCol=pTab->aCol; i<pTab->nCol; i++, pCol++){
    const char *zType;
    int n, m;
    p = a[i].pExpr;
    zType = columnType(&sNC, p, 0, 0, 0, &pCol->szEst);
    szAll += pCol->szEst;
    pCol->affinity = sqlite3ExprAffinity(p);
    if( zType && (m = sqlite3Strlen30(zType))>0 ){
      n = sqlite3Strlen30(pCol->zName);
      pCol->zName = sqlite3DbReallocOrFree(db, pCol->zName, n+m+2);
      if( pCol->zName ){
        memcpy(&pCol->zName[n+1], zType, m+1);
        pCol->colFlags |= COLFLAG_HASTYPE;
      }
    }
    if( pCol->affinity==0 ) pCol->affinity = SQLITE_AFF_BLOB;
    pColl = sqlite3ExprCollSeq(pParse, p);
    if( pColl && pCol->zColl==0 ){
      pCol->zColl = sqlite3DbStrDup(db, pColl->zName);
    }
  }
  pTab->szTabRow = sqlite3LogEst(szAll*4);
}

/*
** Given a SELECT statement, generate a Table structure that describes
** the result set of that SELECT.
*/
Table *sqlite3ResultSetOfSelect(Parse *pParse, Select *pSelect){
  Table *pTab;
  sqlite3 *db = pParse->db;
  int savedFlags;

  savedFlags = db->flags;
  db->flags &= ~SQLITE_FullColNames;
  db->flags |= SQLITE_ShortColNames;
  sqlite3SelectPrep(pParse, pSelect, 0);
  if( pParse->nErr ) return 0;
  while( pSelect->pPrior ) pSelect = pSelect->pPrior;
  db->flags = savedFlags;
  pTab = sqlite3DbMallocZero(db, sizeof(Table) );
  if( pTab==0 ){
    return 0;
  }
  /* The sqlite3ResultSetOfSelect() is only used n contexts where lookaside
  ** is disabled */
  assert( db->lookaside.bDisable );
  pTab->nRef = 1;
  pTab->zName = 0;
  pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
  sqlite3ColumnsFromExprList(pParse, pSelect->pEList, &pTab->nCol, &pTab->aCol);
  sqlite3SelectAddColumnTypeAndCollation(pParse, pTab, pSelect);
  pTab->iPKey = -1;
  if( db->mallocFailed ){
    sqlite3DeleteTable(db, pTab);
    return 0;
  }
  return pTab;
}

/*
** Get a VDBE for the given parser context.  Create a new one if necessary.
** If an error occurs, return NULL and leave a message in pParse.
*/
static SQLITE_NOINLINE Vdbe *allocVdbe(Parse *pParse){
  Vdbe *v = pParse->pVdbe = sqlite3VdbeCreate(pParse);
  if( v ) sqlite3VdbeAddOp2(v, OP_Init, 0, 1);
  if( pParse->pToplevel==0
   && OptimizationEnabled(pParse->db,SQLITE_FactorOutConst)
  ){
    pParse->okConstFactor = 1;
  }
  return v;
}
Vdbe *sqlite3GetVdbe(Parse *pParse){
  Vdbe *v = pParse->pVdbe;
  return v ? v : allocVdbe(pParse);
}


/*
** Compute the iLimit and iOffset fields of the SELECT based on the
** pLimit and pOffset expressions.  pLimit and pOffset hold the expressions
** that appear in the original SQL statement after the LIMIT and OFFSET
** keywords.  Or NULL if those keywords are omitted. iLimit and iOffset
** are the integer memory register numbers for counters used to compute
** the limit and offset.  If there is no limit and/or offset, then
** iLimit and iOffset are negative.
**
** This routine changes the values of iLimit and iOffset only if
** a limit or offset is defined by pLimit and pOffset.  iLimit and
** iOffset should have been preset to appropriate default values (zero)
** prior to calling this routine.
**
** The iOffset register (if it exists) is initialized to the value
** of the OFFSET.  The iLimit register is initialized to LIMIT.  Register
** iOffset+1 is initialized to LIMIT+OFFSET.
**
** Only if pLimit!=0 or pOffset!=0 do the limit registers get
** redefined.  The UNION ALL operator uses this property to force
** the reuse of the same limit and offset registers across multiple
** SELECT statements.
*/
static void computeLimitRegisters(Parse *pParse, Select *p, int iBreak){
  Vdbe *v = 0;
  int iLimit = 0;
  int iOffset;
  int n;
  if( p->iLimit ) return;

  /*
  ** "LIMIT -1" always shows all rows.  There is some
  ** controversy about what the correct behavior should be.
  ** The current implementation interprets "LIMIT 0" to mean
  ** no rows.
  */
  sqlite3ExprCacheClear(pParse);
  assert( p->pOffset==0 || p->pLimit!=0 );
  if( p->pLimit ){
    p->iLimit = iLimit = ++pParse->nMem;
    v = sqlite3GetVdbe(pParse);
    assert( v!=0 );
    if( sqlite3ExprIsInteger(p->pLimit, &n) ){
      sqlite3VdbeAddOp2(v, OP_Integer, n, iLimit);
      VdbeComment((v, "LIMIT counter"));
      if( n==0 ){
        sqlite3VdbeGoto(v, iBreak);
      }else if( n>=0 && p->nSelectRow>sqlite3LogEst((u64)n) ){
        p->nSelectRow = sqlite3LogEst((u64)n);
        p->selFlags |= SF_FixedLimit;
      }
    }else{
      sqlite3ExprCode(pParse, p->pLimit, iLimit);
      sqlite3VdbeAddOp1(v, OP_MustBeInt, iLimit); VdbeCoverage(v);
      VdbeComment((v, "LIMIT counter"));
      sqlite3VdbeAddOp2(v, OP_IfNot, iLimit, iBreak); VdbeCoverage(v);
    }
    if( p->pOffset ){
      p->iOffset = iOffset = ++pParse->nMem;
      pParse->nMem++;   /* Allocate an extra register for limit+offset */
      sqlite3ExprCode(pParse, p->pOffset, iOffset);
      sqlite3VdbeAddOp1(v, OP_MustBeInt, iOffset); VdbeCoverage(v);
      VdbeComment((v, "OFFSET counter"));
      sqlite3VdbeAddOp3(v, OP_OffsetLimit, iLimit, iOffset+1, iOffset);
      VdbeComment((v, "LIMIT+OFFSET"));
    }
  }
}

#ifndef SQLITE_OMIT_COMPOUND_SELECT
/*
** Return the appropriate collating sequence for the iCol-th column of
** the result set for the compound-select statement "p".  Return NULL if
** the column has no default collating sequence.
**
** The collating sequence for the compound select is taken from the
** left-most term of the select that has a collating sequence.
*/
static CollSeq *multiSelectCollSeq(Parse *pParse, Select *p, int iCol){
  CollSeq *pRet;
  if( p->pPrior ){
    pRet = multiSelectCollSeq(pParse, p->pPrior, iCol);
  }else{
    pRet = 0;
  }
  assert( iCol>=0 );
  /* iCol must be less than p->pEList->nExpr.  Otherwise an error would
  ** have been thrown during name resolution and we would not have gotten
  ** this far */
  if( pRet==0 && ALWAYS(iCol<p->pEList->nExpr) ){
    pRet = sqlite3ExprCollSeq(pParse, p->pEList->a[iCol].pExpr);
  }
  return pRet;
}

/*
** The select statement passed as the second parameter is a compound SELECT
** with an ORDER BY clause. This function allocates and returns a KeyInfo
** structure suitable for implementing the ORDER BY.
**
** Space to hold the KeyInfo structure is obtained from malloc. The calling
** function is responsible for ensuring that this structure is eventually
** freed.
*/
static KeyInfo *multiSelectOrderByKeyInfo(Parse *pParse, Select *p, int nExtra){
  ExprList *pOrderBy = p->pOrderBy;
  int nOrderBy = p->pOrderBy->nExpr;
  sqlite3 *db = pParse->db;
  KeyInfo *pRet = sqlite3KeyInfoAlloc(db, nOrderBy+nExtra, 1);
  if( pRet ){
    int i;
    for(i=0; i<nOrderBy; i++){
      struct ExprList_item *pItem = &pOrderBy->a[i];
      Expr *pTerm = pItem->pExpr;
      CollSeq *pColl;

      if( pTerm->flags & EP_Collate ){
        pColl = sqlite3ExprCollSeq(pParse, pTerm);
      }else{
        pColl = multiSelectCollSeq(pParse, p, pItem->u.x.iOrderByCol-1);
        if( pColl==0 ) pColl = db->pDfltColl;
        pOrderBy->a[i].pExpr =
          sqlite3ExprAddCollateString(pParse, pTerm, pColl->zName);
      }
      assert( sqlite3KeyInfoIsWriteable(pRet) );
      pRet->aColl[i] = pColl;
      pRet->aSortOrder[i] = pOrderBy->a[i].sortOrder;
    }
  }

  return pRet;
}

#ifndef SQLITE_OMIT_CTE
/*
** This routine generates VDBE code to compute the content of a WITH RECURSIVE
** query of the form:
**
**   <recursive-table> AS (<setup-query> UNION [ALL] <recursive-query>)
**                         \___________/             \_______________/
**                           p->pPrior                      p
**
**
** There is exactly one reference to the recursive-table in the FROM clause
** of recursive-query, marked with the SrcList->a[].fg.isRecursive flag.
**
** The setup-query runs once to generate an initial set of rows that go
** into a Queue table.  Rows are extracted from the Queue table one by
** one.  Each row extracted from Queue is output to pDest.  Then the single
** extracted row (now in the iCurrent table) becomes the content of the
** recursive-table for a recursive-query run.  The output of the recursive-query
** is added back into the Queue table.  Then another row is extracted from Queue
** and the iteration continues until the Queue table is empty.
**
** If the compound query operator is UNION then no duplicate rows are ever
** inserted into the Queue table.  The iDistinct table keeps a copy of all rows
** that have ever been inserted into Queue and causes duplicates to be
** discarded.  If the operator is UNION ALL, then duplicates are allowed.
**
** If the query has an ORDER BY, then entries in the Queue table are kept in
** ORDER BY order and the first entry is extracted for each cycle.  Without
** an ORDER BY, the Queue table is just a FIFO.
**
** If a LIMIT clause is provided, then the iteration stops after LIMIT rows
** have been output to pDest.  A LIMIT of zero means to output no rows and a
** negative LIMIT means to output all rows.  If there is also an OFFSET clause
** with a positive value, then the first OFFSET outputs are discarded rather
** than being sent to pDest.  The LIMIT count does not begin until after OFFSET
** rows have been skipped.
*/
static void generateWithRecursiveQuery(
  Parse *pParse,        /* Parsing context */
  Select *p,            /* The recursive SELECT to be coded */
  SelectDest *pDest     /* What to do with query results */
){
  SrcList *pSrc = p->pSrc;      /* The FROM clause of the recursive query */
  int nCol = p->pEList->nExpr;  /* Number of columns in the recursive table */
  Vdbe *v = pParse->pVdbe;      /* The prepared statement under construction */
  Select *pSetup = p->pPrior;   /* The setup query */
  int addrTop;                  /* Top of the loop */
  int addrCont, addrBreak;      /* CONTINUE and BREAK addresses */
  int iCurrent = 0;             /* The Current table */
  int regCurrent;               /* Register holding Current table */
  int iQueue;                   /* The Queue table */
  int iDistinct = 0;            /* To ensure unique results if UNION */
  int eDest = SRT_Fifo;         /* How to write to Queue */
  SelectDest destQueue;         /* SelectDest targetting the Queue table */
  int i;                        /* Loop counter */
  int rc;                       /* Result code */
  ExprList *pOrderBy;           /* The ORDER BY clause */
  Expr *pLimit, *pOffset;       /* Saved LIMIT and OFFSET */
  int regLimit, regOffset;      /* Registers used by LIMIT and OFFSET */

  /* Obtain authorization to do a recursive query */
  if( sqlite3AuthCheck(pParse, SQLITE_RECURSIVE, 0, 0, 0) ) return;

  /* Process the LIMIT and OFFSET clauses, if they exist */
  addrBreak = sqlite3VdbeMakeLabel(v);
  computeLimitRegisters(pParse, p, addrBreak);
  pLimit = p->pLimit;
  pOffset = p->pOffset;
  regLimit = p->iLimit;
  regOffset = p->iOffset;
  p->pLimit = p->pOffset = 0;
  p->iLimit = p->iOffset = 0;
  pOrderBy = p->pOrderBy;

  /* Locate the cursor number of the Current table */
  for(i=0; ALWAYS(i<pSrc->nSrc); i++){
    if( pSrc->a[i].fg.isRecursive ){
      iCurrent = pSrc->a[i].iCursor;
      break;
    }
  }

  /* Allocate cursors numbers for Queue and Distinct.  The cursor number for
  ** the Distinct table must be exactly one greater than Queue in order
  ** for the SRT_DistFifo and SRT_DistQueue destinations to work. */
  iQueue = pParse->nTab++;
  if( p->op==TK_UNION ){
    eDest = pOrderBy ? SRT_DistQueue : SRT_DistFifo;
    iDistinct = pParse->nTab++;
  }else{
    eDest = pOrderBy ? SRT_Queue : SRT_Fifo;
  }
  sqlite3SelectDestInit(&destQueue, eDest, iQueue);

  /* Allocate cursors for Current, Queue, and Distinct. */
  regCurrent = ++pParse->nMem;
  sqlite3VdbeAddOp3(v, OP_OpenPseudo, iCurrent, regCurrent, nCol);
  if( pOrderBy ){
    KeyInfo *pKeyInfo = multiSelectOrderByKeyInfo(pParse, p, 1);
    sqlite3VdbeAddOp4(v, OP_OpenEphemeral, iQueue, pOrderBy->nExpr+2, 0,
                      (char*)pKeyInfo, P4_KEYINFO);
    destQueue.pOrderBy = pOrderBy;
  }else{
    sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iQueue, nCol);
  }
  VdbeComment((v, "Queue table"));
  if( iDistinct ){
    p->addrOpenEphm[0] = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iDistinct, 0);
    p->selFlags |= SF_UsesEphemeral;
  }

  /* Detach the ORDER BY clause from the compound SELECT */
  p->pOrderBy = 0;

  /* Store the results of the setup-query in Queue. */
  pSetup->pNext = 0;
  rc = sqlite3Select(pParse, pSetup, &destQueue);
  pSetup->pNext = p;
  if( rc ) goto end_of_recursive_query;

  /* Find the next row in the Queue and output that row */
  addrTop = sqlite3VdbeAddOp2(v, OP_Rewind, iQueue, addrBreak); VdbeCoverage(v);

  /* Transfer the next row in Queue over to Current */
  sqlite3VdbeAddOp1(v, OP_NullRow, iCurrent); /* To reset column cache */
  if( pOrderBy ){
    sqlite3VdbeAddOp3(v, OP_Column, iQueue, pOrderBy->nExpr+1, regCurrent);
  }else{
    sqlite3VdbeAddOp2(v, OP_RowData, iQueue, regCurrent);
  }
  sqlite3VdbeAddOp1(v, OP_Delete, iQueue);

  /* Output the single row in Current */
  addrCont = sqlite3VdbeMakeLabel(v);
  codeOffset(v, regOffset, addrCont);
  selectInnerLoop(pParse, p, p->pEList, iCurrent,
      0, 0, pDest, addrCont, addrBreak);
  if( regLimit ){
    sqlite3VdbeAddOp2(v, OP_DecrJumpZero, regLimit, addrBreak);
    VdbeCoverage(v);
  }
  sqlite3VdbeResolveLabel(v, addrCont);

  /* Execute the recursive SELECT taking the single row in Current as
  ** the value for the recursive-table. Store the results in the Queue.
  */
  if( p->selFlags & SF_Aggregate ){
    sqlite3ErrorMsg(pParse, "recursive aggregate queries not supported");
  }else{
    p->pPrior = 0;
    sqlite3Select(pParse, p, &destQueue);
    assert( p->pPrior==0 );
    p->pPrior = pSetup;
  }

  /* Keep running the loop until the Queue is empty */
  sqlite3VdbeGoto(v, addrTop);
  sqlite3VdbeResolveLabel(v, addrBreak);

end_of_recursive_query:
  sqlite3ExprListDelete(pParse->db, p->pOrderBy);
  p->pOrderBy = pOrderBy;
  p->pLimit = pLimit;
  p->pOffset = pOffset;
  return;
}
#endif /* SQLITE_OMIT_CTE */

/* Forward references */
static int multiSelectOrderBy(
  Parse *pParse,        /* Parsing context */
  Select *p,            /* The right-most of SELECTs to be coded */
  SelectDest *pDest     /* What to do with query results */
);

/*
** Handle the special case of a compound-select that originates from a
** VALUES clause.  By handling this as a special case, we avoid deep
** recursion, and thus do not need to enforce the SQLITE_LIMIT_COMPOUND_SELECT
** on a VALUES clause.
**
** Because the Select object originates from a VALUES clause:
**   (1) It has no LIMIT or OFFSET
**   (2) All terms are UNION ALL
**   (3) There is no ORDER BY clause
*/
static int multiSelectValues(
  Parse *pParse,        /* Parsing context */
  Select *p,            /* The right-most of SELECTs to be coded */
  SelectDest *pDest     /* What to do with query results */
){
  Select *pPrior;
  int nRow = 1;
  int rc = 0;
  assert( p->selFlags & SF_MultiValue );
  do{
    assert( p->selFlags & SF_Values );
    assert( p->op==TK_ALL || (p->op==TK_SELECT && p->pPrior==0) );
    assert( p->pLimit==0 );
    assert( p->pOffset==0 );
    assert( p->pNext==0 || p->pEList->nExpr==p->pNext->pEList->nExpr );
    if( p->pPrior==0 ) break;
    assert( p->pPrior->pNext==p );
    p = p->pPrior;
    nRow++;
  }while(1);
  while( p ){
    pPrior = p->pPrior;
    p->pPrior = 0;
    rc = sqlite3Select(pParse, p, pDest);
    p->pPrior = pPrior;
    if( rc ) break;
    p->nSelectRow = nRow;
    p = p->pNext;
  }
  return rc;
}

/*
** This routine is called to process a compound query form from
** two or more separate queries using UNION, UNION ALL, EXCEPT, or
** INTERSECT
**
** "p" points to the right-most of the two queries.  the query on the
** left is p->pPrior.  The left query could also be a compound query
** in which case this routine will be called recursively.
**
** The results of the total query are to be written into a destination
** of type eDest with parameter iParm.
**
** Example 1:  Consider a three-way compound SQL statement.
**
**     SELECT a FROM t1 UNION SELECT b FROM t2 UNION SELECT c FROM t3
**
** This statement is parsed up as follows:
**
**     SELECT c FROM t3
**      |
**      `----->  SELECT b FROM t2
**                |
**                `------>  SELECT a FROM t1
**
** The arrows in the diagram above represent the Select.pPrior pointer.
** So if this routine is called with p equal to the t3 query, then
** pPrior will be the t2 query.  p->op will be TK_UNION in this case.
**
** Notice that because of the way SQLite parses compound SELECTs, the
** individual selects always group from left to right.
*/
static int multiSelect(
  Parse *pParse,        /* Parsing context */
  Select *p,            /* The right-most of SELECTs to be coded */
  SelectDest *pDest     /* What to do with query results */
){
  int rc = SQLITE_OK;   /* Success code from a subroutine */
  Select *pPrior;       /* Another SELECT immediately to our left */
  Vdbe *v;              /* Generate code to this VDBE */
  SelectDest dest;      /* Alternative data destination */
  Select *pDelete = 0;  /* Chain of simple selects to delete */
  sqlite3 *db;          /* Database connection */
#ifndef SQLITE_OMIT_EXPLAIN
  int iSub1 = 0;        /* EQP id of left-hand query */
  int iSub2 = 0;        /* EQP id of right-hand query */
#endif

  /* Make sure there is no ORDER BY or LIMIT clause on prior SELECTs.  Only
  ** the last (right-most) SELECT in the series may have an ORDER BY or LIMIT.
  */
  assert( p && p->pPrior );  /* Calling function guarantees this much */
  assert( (p->selFlags & SF_Recursive)==0 || p->op==TK_ALL || p->op==TK_UNION );
  db = pParse->db;
  pPrior = p->pPrior;
  dest = *pDest;
  if( pPrior->pOrderBy ){
    sqlite3ErrorMsg(pParse,"ORDER BY clause should come after %s not before",
      selectOpName(p->op));
    rc = 1;
    goto multi_select_end;
  }
  if( pPrior->pLimit ){
    sqlite3ErrorMsg(pParse,"LIMIT clause should come after %s not before",
      selectOpName(p->op));
    rc = 1;
    goto multi_select_end;
  }

  v = sqlite3GetVdbe(pParse);
  assert( v!=0 );  /* The VDBE already created by calling function */

  /* Create the destination temporary table if necessary
  */
  if( dest.eDest==SRT_EphemTab ){
    assert( p->pEList );
    sqlite3VdbeAddOp2(v, OP_OpenEphemeral, dest.iSDParm, p->pEList->nExpr);
    dest.eDest = SRT_Table;
  }

  /* Special handling for a compound-select that originates as a VALUES clause.
  */
  if( p->selFlags & SF_MultiValue ){
    rc = multiSelectValues(pParse, p, &dest);
    goto multi_select_end;
  }

  /* Make sure all SELECTs in the statement have the same number of elements
  ** in their result sets.
  */
  assert( p->pEList && pPrior->pEList );
  assert( p->pEList->nExpr==pPrior->pEList->nExpr );

#ifndef SQLITE_OMIT_CTE
  if( p->selFlags & SF_Recursive ){
    generateWithRecursiveQuery(pParse, p, &dest);
  }else
#endif

  /* Compound SELECTs that have an ORDER BY clause are handled separately.
  */
  if( p->pOrderBy ){
    return multiSelectOrderBy(pParse, p, pDest);
  }else

  /* Generate code for the left and right SELECT statements.
  */
  switch( p->op ){
    case TK_ALL: {
      int addr = 0;
      int nLimit;
      assert( !pPrior->pLimit );
      pPrior->iLimit = p->iLimit;
      pPrior->iOffset = p->iOffset;
      pPrior->pLimit = p->pLimit;
      pPrior->pOffset = p->pOffset;
      explainSetInteger(iSub1, pParse->iNextSelectId);
      rc = sqlite3Select(pParse, pPrior, &dest);
      p->pLimit = 0;
      p->pOffset = 0;
      if( rc ){
        goto multi_select_end;
      }
      p->pPrior = 0;
      p->iLimit = pPrior->iLimit;
      p->iOffset = pPrior->iOffset;
      if( p->iLimit ){
        addr = sqlite3VdbeAddOp1(v, OP_IfNot, p->iLimit); VdbeCoverage(v);
        VdbeComment((v, "Jump ahead if LIMIT reached"));
        if( p->iOffset ){
          sqlite3VdbeAddOp3(v, OP_OffsetLimit,
                            p->iLimit, p->iOffset+1, p->iOffset);
        }
      }
      explainSetInteger(iSub2, pParse->iNextSelectId);
      rc = sqlite3Select(pParse, p, &dest);
      testcase( rc!=SQLITE_OK );
      pDelete = p->pPrior;
      p->pPrior = pPrior;
      p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow);
      if( pPrior->pLimit
       && sqlite3ExprIsInteger(pPrior->pLimit, &nLimit)
       && nLimit>0 && p->nSelectRow > sqlite3LogEst((u64)nLimit)
      ){
        p->nSelectRow = sqlite3LogEst((u64)nLimit);
      }
      if( addr ){
        sqlite3VdbeJumpHere(v, addr);
      }
      break;
    }
    case TK_EXCEPT:
    case TK_UNION: {
      int unionTab;    /* Cursor number of the temporary table holding result */
      u8 op = 0;       /* One of the SRT_ operations to apply to self */
      int priorOp;     /* The SRT_ operation to apply to prior selects */
      Expr *pLimit, *pOffset; /* Saved values of p->nLimit and p->nOffset */
      int addr;
      SelectDest uniondest;

      testcase( p->op==TK_EXCEPT );
      testcase( p->op==TK_UNION );
      priorOp = SRT_Union;
      if( dest.eDest==priorOp ){
        /* We can reuse a temporary table generated by a SELECT to our
        ** right.
        */
        assert( p->pLimit==0 );      /* Not allowed on leftward elements */
        assert( p->pOffset==0 );     /* Not allowed on leftward elements */
        unionTab = dest.iSDParm;
      }else{
        /* We will need to create our own temporary table to hold the
        ** intermediate results.
        */
        unionTab = pParse->nTab++;
        assert( p->pOrderBy==0 );
        addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, unionTab, 0);
        assert( p->addrOpenEphm[0] == -1 );
        p->addrOpenEphm[0] = addr;
        findRightmost(p)->selFlags |= SF_UsesEphemeral;
        assert( p->pEList );
      }

      /* Code the SELECT statements to our left
      */
      assert( !pPrior->pOrderBy );
      sqlite3SelectDestInit(&uniondest, priorOp, unionTab);
      explainSetInteger(iSub1, pParse->iNextSelectId);
      rc = sqlite3Select(pParse, pPrior, &uniondest);
      if( rc ){
        goto multi_select_end;
      }

      /* Code the current SELECT statement
      */
      if( p->op==TK_EXCEPT ){
        op = SRT_Except;
      }else{
        assert( p->op==TK_UNION );
        op = SRT_Union;
      }
      p->pPrior = 0;
      pLimit = p->pLimit;
      p->pLimit = 0;
      pOffset = p->pOffset;
      p->pOffset = 0;
      uniondest.eDest = op;
      explainSetInteger(iSub2, pParse->iNextSelectId);
      rc = sqlite3Select(pParse, p, &uniondest);
      testcase( rc!=SQLITE_OK );
      /* Query flattening in sqlite3Select() might refill p->pOrderBy.
      ** Be sure to delete p->pOrderBy, therefore, to avoid a memory leak. */
      sqlite3ExprListDelete(db, p->pOrderBy);
      pDelete = p->pPrior;
      p->pPrior = pPrior;
      p->pOrderBy = 0;
      if( p->op==TK_UNION ){
        p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow);
      }
      sqlite3ExprDelete(db, p->pLimit);
      p->pLimit = pLimit;
      p->pOffset = pOffset;
      p->iLimit = 0;
      p->iOffset = 0;

      /* Convert the data in the temporary table into whatever form
      ** it is that we currently need.
      */
      assert( unionTab==dest.iSDParm || dest.eDest!=priorOp );
      if( dest.eDest!=priorOp ){
        int iCont, iBreak, iStart;
        assert( p->pEList );
        if( dest.eDest==SRT_Output ){
          Select *pFirst = p;
          while( pFirst->pPrior ) pFirst = pFirst->pPrior;
          generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList);
        }
        iBreak = sqlite3VdbeMakeLabel(v);
        iCont = sqlite3VdbeMakeLabel(v);
        computeLimitRegisters(pParse, p, iBreak);
        sqlite3VdbeAddOp2(v, OP_Rewind, unionTab, iBreak); VdbeCoverage(v);
        iStart = sqlite3VdbeCurrentAddr(v);
        selectInnerLoop(pParse, p, p->pEList, unionTab,
                        0, 0, &dest, iCont, iBreak);
        sqlite3VdbeResolveLabel(v, iCont);
        sqlite3VdbeAddOp2(v, OP_Next, unionTab, iStart); VdbeCoverage(v);
        sqlite3VdbeResolveLabel(v, iBreak);
        sqlite3VdbeAddOp2(v, OP_Close, unionTab, 0);
      }
      break;
    }
    default: assert( p->op==TK_INTERSECT ); {
      int tab1, tab2;
      int iCont, iBreak, iStart;
      Expr *pLimit, *pOffset;
      int addr;
      SelectDest intersectdest;
      int r1;

      /* INTERSECT is different from the others since it requires
      ** two temporary tables.  Hence it has its own case.  Begin
      ** by allocating the tables we will need.
      */
      tab1 = pParse->nTab++;
      tab2 = pParse->nTab++;
      assert( p->pOrderBy==0 );

      addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab1, 0);
      assert( p->addrOpenEphm[0] == -1 );
      p->addrOpenEphm[0] = addr;
      findRightmost(p)->selFlags |= SF_UsesEphemeral;
      assert( p->pEList );

      /* Code the SELECTs to our left into temporary table "tab1".
      */
      sqlite3SelectDestInit(&intersectdest, SRT_Union, tab1);
      explainSetInteger(iSub1, pParse->iNextSelectId);
      rc = sqlite3Select(pParse, pPrior, &intersectdest);
      if( rc ){
        goto multi_select_end;
      }

      /* Code the current SELECT into temporary table "tab2"
      */
      addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab2, 0);
      assert( p->addrOpenEphm[1] == -1 );
      p->addrOpenEphm[1] = addr;
      p->pPrior = 0;
      pLimit = p->pLimit;
      p->pLimit = 0;
      pOffset = p->pOffset;
      p->pOffset = 0;
      intersectdest.iSDParm = tab2;
      explainSetInteger(iSub2, pParse->iNextSelectId);
      rc = sqlite3Select(pParse, p, &intersectdest);
      testcase( rc!=SQLITE_OK );
      pDelete = p->pPrior;
      p->pPrior = pPrior;
      if( p->nSelectRow>pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow;
      sqlite3ExprDelete(db, p->pLimit);
      p->pLimit = pLimit;
      p->pOffset = pOffset;

      /* Generate code to take the intersection of the two temporary
      ** tables.
      */
      assert( p->pEList );
      if( dest.eDest==SRT_Output ){
        Select *pFirst = p;
        while( pFirst->pPrior ) pFirst = pFirst->pPrior;
        generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList);
      }
      iBreak = sqlite3VdbeMakeLabel(v);
      iCont = sqlite3VdbeMakeLabel(v);
      computeLimitRegisters(pParse, p, iBreak);
      sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); VdbeCoverage(v);
      r1 = sqlite3GetTempReg(pParse);
      iStart = sqlite3VdbeAddOp2(v, OP_RowKey, tab1, r1);
      sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); VdbeCoverage(v);
      sqlite3ReleaseTempReg(pParse, r1);
      selectInnerLoop(pParse, p, p->pEList, tab1,
                      0, 0, &dest, iCont, iBreak);
      sqlite3VdbeResolveLabel(v, iCont);
      sqlite3VdbeAddOp2(v, OP_Next, tab1, iStart); VdbeCoverage(v);
      sqlite3VdbeResolveLabel(v, iBreak);
      sqlite3VdbeAddOp2(v, OP_Close, tab2, 0);
      sqlite3VdbeAddOp2(v, OP_Close, tab1, 0);
      break;
    }
  }

  explainComposite(pParse, p->op, iSub1, iSub2, p->op!=TK_ALL);

  /* Compute collating sequences used by
  ** temporary tables needed to implement the compound select.
  ** Attach the KeyInfo structure to all temporary tables.
  **
  ** This section is run by the right-most SELECT statement only.
  ** SELECT statements to the left always skip this part.  The right-most
  ** SELECT might also skip this part if it has no ORDER BY clause and
  ** no temp tables are required.
  */
  if( p->selFlags & SF_UsesEphemeral ){
    int i;                        /* Loop counter */
    KeyInfo *pKeyInfo;            /* Collating sequence for the result set */
    Select *pLoop;                /* For looping through SELECT statements */
    CollSeq **apColl;             /* For looping through pKeyInfo->aColl[] */
    int nCol;                     /* Number of columns in result set */

    assert( p->pNext==0 );
    nCol = p->pEList->nExpr;
    pKeyInfo = sqlite3KeyInfoAlloc(db, nCol, 1);
    if( !pKeyInfo ){
      rc = SQLITE_NOMEM_BKPT;
      goto multi_select_end;
    }
    for(i=0, apColl=pKeyInfo->aColl; i<nCol; i++, apColl++){
      *apColl = multiSelectCollSeq(pParse, p, i);
      if( 0==*apColl ){
        *apColl = db->pDfltColl;
      }
    }

    for(pLoop=p; pLoop; pLoop=pLoop->pPrior){
      for(i=0; i<2; i++){
        int addr = pLoop->addrOpenEphm[i];
        if( addr<0 ){
          /* If [0] is unused then [1] is also unused.  So we can
          ** always safely abort as soon as the first unused slot is found */
          assert( pLoop->addrOpenEphm[1]<0 );
          break;
        }
        sqlite3VdbeChangeP2(v, addr, nCol);
        sqlite3VdbeChangeP4(v, addr, (char*)sqlite3KeyInfoRef(pKeyInfo),
                            P4_KEYINFO);
        pLoop->addrOpenEphm[i] = -1;
      }
    }
    sqlite3KeyInfoUnref(pKeyInfo);
  }

multi_select_end:
  pDest->iSdst = dest.iSdst;
  pDest->nSdst = dest.nSdst;
  sqlite3SelectDelete(db, pDelete);
  return rc;
}
#endif /* SQLITE_OMIT_COMPOUND_SELECT */

/*
** Error message for when two or more terms of a compound select have different
** size result sets.
*/
void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p){
  if( p->selFlags & SF_Values ){
    sqlite3ErrorMsg(pParse, "all VALUES must have the same number of terms");
  }else{
    sqlite3ErrorMsg(pParse, "SELECTs to the left and right of %s"
      " do not have the same number of result columns", selectOpName(p->op));
  }
}

/*
** Code an output subroutine for a coroutine implementation of a
** SELECT statment.
**
** The data to be output is contained in pIn->iSdst.  There are
** pIn->nSdst columns to be output.  pDest is where the output should
** be sent.
**
** regReturn is the number of the register holding the subroutine
** return address.
**
** If regPrev>0 then it is the first register in a vector that
** records the previous output.  mem[regPrev] is a flag that is false
** if there has been no previous output.  If regPrev>0 then code is
** generated to suppress duplicates.  pKeyInfo is used for comparing
** keys.
**
** If the LIMIT found in p->iLimit is reached, jump immediately to
** iBreak.
*/
static int generateOutputSubroutine(
  Parse *pParse,          /* Parsing context */
  Select *p,              /* The SELECT statement */
  SelectDest *pIn,        /* Coroutine supplying data */
  SelectDest *pDest,      /* Where to send the data */
  int regReturn,          /* The return address register */
  int regPrev,            /* Previous result register.  No uniqueness if 0 */
  KeyInfo *pKeyInfo,      /* For comparing with previous entry */
  int iBreak              /* Jump here if we hit the LIMIT */
){
  Vdbe *v = pParse->pVdbe;
  int iContinue;
  int addr;

  addr = sqlite3VdbeCurrentAddr(v);
  iContinue = sqlite3VdbeMakeLabel(v);

  /* Suppress duplicates for UNION, EXCEPT, and INTERSECT
  */
  if( regPrev ){
    int addr1, addr2;
    addr1 = sqlite3VdbeAddOp1(v, OP_IfNot, regPrev); VdbeCoverage(v);
    addr2 = sqlite3VdbeAddOp4(v, OP_Compare, pIn->iSdst, regPrev+1, pIn->nSdst,
                              (char*)sqlite3KeyInfoRef(pKeyInfo), P4_KEYINFO);
    sqlite3VdbeAddOp3(v, OP_Jump, addr2+2, iContinue, addr2+2); VdbeCoverage(v);
    sqlite3VdbeJumpHere(v, addr1);
    sqlite3VdbeAddOp3(v, OP_Copy, pIn->iSdst, regPrev+1, pIn->nSdst-1);
    sqlite3VdbeAddOp2(v, OP_Integer, 1, regPrev);
  }
  if( pParse->db->mallocFailed ) return 0;

  /* Suppress the first OFFSET entries if there is an OFFSET clause
  */
  codeOffset(v, p->iOffset, iContinue);

  assert( pDest->eDest!=SRT_Exists );
  assert( pDest->eDest!=SRT_Table );
  switch( pDest->eDest ){
    /* Store the result as data using a unique key.
    */
    case SRT_EphemTab: {
      int r1 = sqlite3GetTempReg(pParse);
      int r2 = sqlite3GetTempReg(pParse);
      sqlite3VdbeAddOp3(v, OP_MakeRecord, pIn->iSdst, pIn->nSdst, r1);
      sqlite3VdbeAddOp2(v, OP_NewRowid, pDest->iSDParm, r2);
      sqlite3VdbeAddOp3(v, OP_Insert, pDest->iSDParm, r1, r2);
      sqlite3VdbeChangeP5(v, OPFLAG_APPEND);
      sqlite3ReleaseTempReg(pParse, r2);
      sqlite3ReleaseTempReg(pParse, r1);
      break;
    }

#ifndef SQLITE_OMIT_SUBQUERY
    /* If we are creating a set for an "expr IN (SELECT ...)".
    */
    case SRT_Set: {
      int r1;
      testcase( pIn->nSdst>1 );
      r1 = sqlite3GetTempReg(pParse);
      sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iSdst, pIn->nSdst,
          r1, pDest->zAffSdst, pIn->nSdst);
      sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, pIn->nSdst);
      sqlite3VdbeAddOp2(v, OP_IdxInsert, pDest->iSDParm, r1);
      sqlite3ReleaseTempReg(pParse, r1);
      break;
    }

    /* If this is a scalar select that is part of an expression, then
    ** store the results in the appropriate memory cell and break out
    ** of the scan loop.
    */
    case SRT_Mem: {
      assert( pIn->nSdst==1 || pParse->nErr>0 );  testcase( pIn->nSdst!=1 );
      sqlite3ExprCodeMove(pParse, pIn->iSdst, pDest->iSDParm, 1);
      /* The LIMIT clause will jump out of the loop for us */
      break;
    }
#endif /* #ifndef SQLITE_OMIT_SUBQUERY */

    /* The results are stored in a sequence of registers
    ** starting at pDest->iSdst.  Then the co-routine yields.
    */
    case SRT_Coroutine: {
      if( pDest->iSdst==0 ){
        pDest->iSdst = sqlite3GetTempRange(pParse, pIn->nSdst);
        pDest->nSdst = pIn->nSdst;
      }
      sqlite3ExprCodeMove(pParse, pIn->iSdst, pDest->iSdst, pIn->nSdst);
      sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm);
      break;
    }

    /* If none of the above, then the result destination must be
    ** SRT_Output.  This routine is never called with any other
    ** destination other than the ones handled above or SRT_Output.
    **
    ** For SRT_Output, results are stored in a sequence of registers.
    ** Then the OP_ResultRow opcode is used to cause sqlite3_step() to
    ** return the next row of result.
    */
    default: {
      assert( pDest->eDest==SRT_Output );
      sqlite3VdbeAddOp2(v, OP_ResultRow, pIn->iSdst, pIn->nSdst);
      sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, pIn->nSdst);
      break;
    }
  }

  /* Jump to the end of the loop if the LIMIT is reached.
  */
  if( p->iLimit ){
    sqlite3VdbeAddOp2(v, OP_DecrJumpZero, p->iLimit, iBreak); VdbeCoverage(v);
  }

  /* Generate the subroutine return
  */
  sqlite3VdbeResolveLabel(v, iContinue);
  sqlite3VdbeAddOp1(v, OP_Return, regReturn);

  return addr;
}

/*
** Alternative compound select code generator for cases when there
** is an ORDER BY clause.
**
** We assume a query of the following form:
**
**      <selectA>  <operator>  <selectB>  ORDER BY <orderbylist>
**
** <operator> is one of UNION ALL, UNION, EXCEPT, or INTERSECT.  The idea
** is to code both <selectA> and <selectB> with the ORDER BY clause as
** co-routines.  Then run the co-routines in parallel and merge the results
** into the output.  In addition to the two coroutines (called selectA and
** selectB) there are 7 subroutines:
**
**    outA:    Move the output of the selectA coroutine into the output
**             of the compound query.
**
**    outB:    Move the output of the selectB coroutine into the output
**             of the compound query.  (Only generated for UNION and
**             UNION ALL.  EXCEPT and INSERTSECT never output a row that
**             appears only in B.)
**
**    AltB:    Called when there is data from both coroutines and A<B.
**
**    AeqB:    Called when there is data from both coroutines and A==B.
**
**    AgtB:    Called when there is data from both coroutines and A>B.
**
**    EofA:    Called when data is exhausted from selectA.
**
**    EofB:    Called when data is exhausted from selectB.
**
** The implementation of the latter five subroutines depend on which
** <operator> is used:
**
**
**             UNION ALL         UNION            EXCEPT          INTERSECT
**          -------------  -----------------  --------------  -----------------
**   AltB:   outA, nextA      outA, nextA       outA, nextA         nextA
**
**   AeqB:   outA, nextA         nextA             nextA         outA, nextA
**
**   AgtB:   outB, nextB      outB, nextB          nextB            nextB
**
**   EofA:   outB, nextB      outB, nextB          halt             halt
**
**   EofB:   outA, nextA      outA, nextA       outA, nextA         halt
**
** In the AltB, AeqB, and AgtB subroutines, an EOF on A following nextA
** causes an immediate jump to EofA and an EOF on B following nextB causes
** an immediate jump to EofB.  Within EofA and EofB, and EOF on entry or
** following nextX causes a jump to the end of the select processing.
**
** Duplicate removal in the UNION, EXCEPT, and INTERSECT cases is handled
** within the output subroutine.  The regPrev register set holds the previously
** output value.  A comparison is made against this value and the output
** is skipped if the next results would be the same as the previous.
**
** The implementation plan is to implement the two coroutines and seven
** subroutines first, then put the control logic at the bottom.  Like this:
**
**          goto Init
**     coA: coroutine for left query (A)
**     coB: coroutine for right query (B)
**    outA: output one row of A
**    outB: output one row of B (UNION and UNION ALL only)
**    EofA: ...
**    EofB: ...
**    AltB: ...
**    AeqB: ...
**    AgtB: ...
**    Init: initialize coroutine registers
**          yield coA
**          if eof(A) goto EofA
**          yield coB
**          if eof(B) goto EofB
**    Cmpr: Compare A, B
**          Jump AltB, AeqB, AgtB
**     End: ...
**
** We call AltB, AeqB, AgtB, EofA, and EofB "subroutines" but they are not
** actually called using Gosub and they do not Return.  EofA and EofB loop
** until all data is exhausted then jump to the "end" labe.  AltB, AeqB,
** and AgtB jump to either L2 or to one of EofA or EofB.
*/
#ifndef SQLITE_OMIT_COMPOUND_SELECT
static int multiSelectOrderBy(
  Parse *pParse,        /* Parsing context */
  Select *p,            /* The right-most of SELECTs to be coded */
  SelectDest *pDest     /* What to do with query results */
){
  int i, j;             /* Loop counters */
  Select *pPrior;       /* Another SELECT immediately to our left */
  Vdbe *v;              /* Generate code to this VDBE */
  SelectDest destA;     /* Destination for coroutine A */
  SelectDest destB;     /* Destination for coroutine B */
  int regAddrA;         /* Address register for select-A coroutine */
  int regAddrB;         /* Address register for select-B coroutine */
  int addrSelectA;      /* Address of the select-A coroutine */
  int addrSelectB;      /* Address of the select-B coroutine */
  int regOutA;          /* Address register for the output-A subroutine */
  int regOutB;          /* Address register for the output-B subroutine */
  int addrOutA;         /* Address of the output-A subroutine */
  int addrOutB = 0;     /* Address of the output-B subroutine */
  int addrEofA;         /* Address of the select-A-exhausted subroutine */
  int addrEofA_noB;     /* Alternate addrEofA if B is uninitialized */
  int addrEofB;         /* Address of the select-B-exhausted subroutine */
  int addrAltB;         /* Address of the A<B subroutine */
  int addrAeqB;         /* Address of the A==B subroutine */
  int addrAgtB;         /* Address of the A>B subroutine */
  int regLimitA;        /* Limit register for select-A */
  int regLimitB;        /* Limit register for select-A */
  int regPrev;          /* A range of registers to hold previous output */
  int savedLimit;       /* Saved value of p->iLimit */
  int savedOffset;      /* Saved value of p->iOffset */
  int labelCmpr;        /* Label for the start of the merge algorithm */
  int labelEnd;         /* Label for the end of the overall SELECT stmt */
  int addr1;            /* Jump instructions that get retargetted */
  int op;               /* One of TK_ALL, TK_UNION, TK_EXCEPT, TK_INTERSECT */
  KeyInfo *pKeyDup = 0; /* Comparison information for duplicate removal */
  KeyInfo *pKeyMerge;   /* Comparison information for merging rows */
  sqlite3 *db;          /* Database connection */
  ExprList *pOrderBy;   /* The ORDER BY clause */
  int nOrderBy;         /* Number of terms in the ORDER BY clause */
  int *aPermute;        /* Mapping from ORDER BY terms to result set columns */
#ifndef SQLITE_OMIT_EXPLAIN
  int iSub1;            /* EQP id of left-hand query */
  int iSub2;            /* EQP id of right-hand query */
#endif

  assert( p->pOrderBy!=0 );
  assert( pKeyDup==0 ); /* "Managed" code needs this.  Ticket #3382. */
  db = pParse->db;
  v = pParse->pVdbe;
  assert( v!=0 );       /* Already thrown the error if VDBE alloc failed */
  labelEnd = sqlite3VdbeMakeLabel(v);
  labelCmpr = sqlite3VdbeMakeLabel(v);


  /* Patch up the ORDER BY clause
  */
  op = p->op;
  pPrior = p->pPrior;
  assert( pPrior->pOrderBy==0 );
  pOrderBy = p->pOrderBy;
  assert( pOrderBy );
  nOrderBy = pOrderBy->nExpr;

  /* For operators other than UNION ALL we have to make sure that
  ** the ORDER BY clause covers every term of the result set.  Add
  ** terms to the ORDER BY clause as necessary.
  */
  if( op!=TK_ALL ){
    for(i=1; db->mallocFailed==0 && i<=p->pEList->nExpr; i++){
      struct ExprList_item *pItem;
      for(j=0, pItem=pOrderBy->a; j<nOrderBy; j++, pItem++){
        assert( pItem->u.x.iOrderByCol>0 );
        if( pItem->u.x.iOrderByCol==i ) break;
      }
      if( j==nOrderBy ){
        Expr *pNew = sqlite3Expr(db, TK_INTEGER, 0);
        if( pNew==0 ) return SQLITE_NOMEM_BKPT;
        pNew->flags |= EP_IntValue;
        pNew->u.iValue = i;
        pOrderBy = sqlite3ExprListAppend(pParse, pOrderBy, pNew);
        if( pOrderBy ) pOrderBy->a[nOrderBy++].u.x.iOrderByCol = (u16)i;
      }
    }
  }

  /* Compute the comparison permutation and keyinfo that is used with
  ** the permutation used to determine if the next
  ** row of results comes from selectA or selectB.  Also add explicit
  ** collations to the ORDER BY clause terms so that when the subqueries
  ** to the right and the left are evaluated, they use the correct
  ** collation.
  */
  aPermute = sqlite3DbMallocRawNN(db, sizeof(int)*(nOrderBy + 1));
  if( aPermute ){
    struct ExprList_item *pItem;
    aPermute[0] = nOrderBy;
    for(i=1, pItem=pOrderBy->a; i<=nOrderBy; i++, pItem++){
      assert( pItem->u.x.iOrderByCol>0 );
      assert( pItem->u.x.iOrderByCol<=p->pEList->nExpr );
      aPermute[i] = pItem->u.x.iOrderByCol - 1;
    }
    pKeyMerge = multiSelectOrderByKeyInfo(pParse, p, 1);
  }else{
    pKeyMerge = 0;
  }

  /* Reattach the ORDER BY clause to the query.
  */
  p->pOrderBy = pOrderBy;
  pPrior->pOrderBy = sqlite3ExprListDup(pParse->db, pOrderBy, 0);

  /* Allocate a range of temporary registers and the KeyInfo needed
  ** for the logic that removes duplicate result rows when the
  ** operator is UNION, EXCEPT, or INTERSECT (but not UNION ALL).
  */
  if( op==TK_ALL ){
    regPrev = 0;
  }else{
    int nExpr = p->pEList->nExpr;
    assert( nOrderBy>=nExpr || db->mallocFailed );
    regPrev = pParse->nMem+1;
    pParse->nMem += nExpr+1;
    sqlite3VdbeAddOp2(v, OP_Integer, 0, regPrev);
    pKeyDup = sqlite3KeyInfoAlloc(db, nExpr, 1);
    if( pKeyDup ){
      assert( sqlite3KeyInfoIsWriteable(pKeyDup) );
      for(i=0; i<nExpr; i++){
        pKeyDup->aColl[i] = multiSelectCollSeq(pParse, p, i);
        pKeyDup->aSortOrder[i] = 0;
      }
    }
  }

  /* Separate the left and the right query from one another
  */
  p->pPrior = 0;
  pPrior->pNext = 0;
  sqlite3ResolveOrderGroupBy(pParse, p, p->pOrderBy, "ORDER");
  if( pPrior->pPrior==0 ){
    sqlite3ResolveOrderGroupBy(pParse, pPrior, pPrior->pOrderBy, "ORDER");
  }

  /* Compute the limit registers */
  computeLimitRegisters(pParse, p, labelEnd);
  if( p->iLimit && op==TK_ALL ){
    regLimitA = ++pParse->nMem;
    regLimitB = ++pParse->nMem;
    sqlite3VdbeAddOp2(v, OP_Copy, p->iOffset ? p->iOffset+1 : p->iLimit,
                                  regLimitA);
    sqlite3VdbeAddOp2(v, OP_Copy, regLimitA, regLimitB);
  }else{
    regLimitA = regLimitB = 0;
  }
  sqlite3ExprDelete(db, p->pLimit);
  p->pLimit = 0;
  sqlite3ExprDelete(db, p->pOffset);
  p->pOffset = 0;

  regAddrA = ++pParse->nMem;
  regAddrB = ++pParse->nMem;
  regOutA = ++pParse->nMem;
  regOutB = ++pParse->nMem;
  sqlite3SelectDestInit(&destA, SRT_Coroutine, regAddrA);
  sqlite3SelectDestInit(&destB, SRT_Coroutine, regAddrB);

  /* Generate a coroutine to evaluate the SELECT statement to the
  ** left of the compound operator - the "A" select.
  */
  addrSelectA = sqlite3VdbeCurrentAddr(v) + 1;
  addr1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrA, 0, addrSelectA);
  VdbeComment((v, "left SELECT"));
  pPrior->iLimit = regLimitA;
  explainSetInteger(iSub1, pParse->iNextSelectId);
  sqlite3Select(pParse, pPrior, &destA);
  sqlite3VdbeEndCoroutine(v, regAddrA);
  sqlite3VdbeJumpHere(v, addr1);

  /* Generate a coroutine to evaluate the SELECT statement on
  ** the right - the "B" select
  */
  addrSelectB = sqlite3VdbeCurrentAddr(v) + 1;
  addr1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrB, 0, addrSelectB);
  VdbeComment((v, "right SELECT"));
  savedLimit = p->iLimit;
  savedOffset = p->iOffset;
  p->iLimit = regLimitB;
  p->iOffset = 0;
  explainSetInteger(iSub2, pParse->iNextSelectId);
  sqlite3Select(pParse, p, &destB);
  p->iLimit = savedLimit;
  p->iOffset = savedOffset;
  sqlite3VdbeEndCoroutine(v, regAddrB);

  /* Generate a subroutine that outputs the current row of the A
  ** select as the next output row of the compound select.
  */
  VdbeNoopComment((v, "Output routine for A"));
  addrOutA = generateOutputSubroutine(pParse,
                 p, &destA, pDest, regOutA,
                 regPrev, pKeyDup, labelEnd);

  /* Generate a subroutine that outputs the current row of the B
  ** select as the next output row of the compound select.
  */
  if( op==TK_ALL || op==TK_UNION ){
    VdbeNoopComment((v, "Output routine for B"));
    addrOutB = generateOutputSubroutine(pParse,
                 p, &destB, pDest, regOutB,
                 regPrev, pKeyDup, labelEnd);
  }
  sqlite3KeyInfoUnref(pKeyDup);

  /* Generate a subroutine to run when the results from select A
  ** are exhausted and only data in select B remains.
  */
  if( op==TK_EXCEPT || op==TK_INTERSECT ){
    addrEofA_noB = addrEofA = labelEnd;
  }else{
    VdbeNoopComment((v, "eof-A subroutine"));
    addrEofA = sqlite3VdbeAddOp2(v, OP_Gosub, regOutB, addrOutB);
    addrEofA_noB = sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, labelEnd);
                                     VdbeCoverage(v);
    sqlite3VdbeGoto(v, addrEofA);
    p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow);
  }

  /* Generate a subroutine to run when the results from select B
  ** are exhausted and only data in select A remains.
  */
  if( op==TK_INTERSECT ){
    addrEofB = addrEofA;
    if( p->nSelectRow > pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow;
  }else{
    VdbeNoopComment((v, "eof-B subroutine"));
    addrEofB = sqlite3VdbeAddOp2(v, OP_Gosub, regOutA, addrOutA);
    sqlite3VdbeAddOp2(v, OP_Yield, regAddrA, labelEnd); VdbeCoverage(v);
    sqlite3VdbeGoto(v, addrEofB);
  }

  /* Generate code to handle the case of A<B
  */
  VdbeNoopComment((v, "A-lt-B subroutine"));
  addrAltB = sqlite3VdbeAddOp2(v, OP_Gosub, regOutA, addrOutA);
  sqlite3VdbeAddOp2(v, OP_Yield, regAddrA, addrEofA); VdbeCoverage(v);
  sqlite3VdbeGoto(v, labelCmpr);

  /* Generate code to handle the case of A==B
  */
  if( op==TK_ALL ){
    addrAeqB = addrAltB;
  }else if( op==TK_INTERSECT ){
    addrAeqB = addrAltB;
    addrAltB++;
  }else{
    VdbeNoopComment((v, "A-eq-B subroutine"));
    addrAeqB =
    sqlite3VdbeAddOp2(v, OP_Yield, regAddrA, addrEofA); VdbeCoverage(v);
    sqlite3VdbeGoto(v, labelCmpr);
  }

  /* Generate code to handle the case of A>B
  */
  VdbeNoopComment((v, "A-gt-B subroutine"));
  addrAgtB = sqlite3VdbeCurrentAddr(v);
  if( op==TK_ALL || op==TK_UNION ){
    sqlite3VdbeAddOp2(v, OP_Gosub, regOutB, addrOutB);
  }
  sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, addrEofB); VdbeCoverage(v);
  sqlite3VdbeGoto(v, labelCmpr);

  /* This code runs once to initialize everything.
  */
  sqlite3VdbeJumpHere(v, addr1);
  sqlite3VdbeAddOp2(v, OP_Yield, regAddrA, addrEofA_noB); VdbeCoverage(v);
  sqlite3VdbeAddOp2(v, OP_Yield, regAddrB, addrEofB); VdbeCoverage(v);

  /* Implement the main merge loop
  */
  sqlite3VdbeResolveLabel(v, labelCmpr);
  sqlite3VdbeAddOp4(v, OP_Permutation, 0, 0, 0, (char*)aPermute, P4_INTARRAY);
  sqlite3VdbeAddOp4(v, OP_Compare, destA.iSdst, destB.iSdst, nOrderBy,
                         (char*)pKeyMerge, P4_KEYINFO);
  sqlite3VdbeChangeP5(v, OPFLAG_PERMUTE);
  sqlite3VdbeAddOp3(v, OP_Jump, addrAltB, addrAeqB, addrAgtB); VdbeCoverage(v);

  /* Jump to the this point in order to terminate the query.
  */
  sqlite3VdbeResolveLabel(v, labelEnd);

  /* Set the number of output columns
  */
  if( pDest->eDest==SRT_Output ){
    Select *pFirst = pPrior;
    while( pFirst->pPrior ) pFirst = pFirst->pPrior;
    generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList);
  }

  /* Reassembly the compound query so that it will be freed correctly
  ** by the calling function */
  if( p->pPrior ){
    sqlite3SelectDelete(db, p->pPrior);
  }
  p->pPrior = pPrior;
  pPrior->pNext = p;

  /*** TBD:  Insert subroutine calls to close cursors on incomplete
  **** subqueries ****/
  explainComposite(pParse, p->op, iSub1, iSub2, 0);
  return pParse->nErr!=0;
}
#endif

#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
/* Forward Declarations */
static void substExprList(sqlite3*, ExprList*, int, ExprList*);
static void substSelect(sqlite3*, Select *, int, ExprList*, int);

/*
** Scan through the expression pExpr.  Replace every reference to
** a column in table number iTable with a copy of the iColumn-th
** entry in pEList.  (But leave references to the ROWID column
** unchanged.)
**
** This routine is part of the flattening procedure.  A subquery
** whose result set is defined by pEList appears as entry in the
** FROM clause of a SELECT such that the VDBE cursor assigned to that
** FORM clause entry is iTable.  This routine make the necessary
** changes to pExpr so that it refers directly to the source table
** of the subquery rather the result set of the subquery.
*/
static Expr *substExpr(
  sqlite3 *db,        /* Report malloc errors to this connection */
  Expr *pExpr,        /* Expr in which substitution occurs */
  int iTable,         /* Table to be substituted */
  ExprList *pEList    /* Substitute expressions */
){
  if( pExpr==0 ) return 0;
  if( pExpr->op==TK_COLUMN && pExpr->iTable==iTable ){
    if( pExpr->iColumn<0 ){
      pExpr->op = TK_NULL;
    }else{
      Expr *pNew;
      assert( pEList!=0 && pExpr->iColumn<pEList->nExpr );
      assert( pExpr->pLeft==0 && pExpr->pRight==0 );
      pNew = sqlite3ExprDup(db, pEList->a[pExpr->iColumn].pExpr, 0);
      sqlite3ExprDelete(db, pExpr);
      pExpr = pNew;
    }
  }else{
    pExpr->pLeft = substExpr(db, pExpr->pLeft, iTable, pEList);
    pExpr->pRight = substExpr(db, pExpr->pRight, iTable, pEList);
    if( ExprHasProperty(pExpr, EP_xIsSelect) ){
      substSelect(db, pExpr->x.pSelect, iTable, pEList, 1);
    }else{
      substExprList(db, pExpr->x.pList, iTable, pEList);
    }
  }
  return pExpr;
}
static void substExprList(
  sqlite3 *db,         /* Report malloc errors here */
  ExprList *pList,     /* List to scan and in which to make substitutes */
  int iTable,          /* Table to be substituted */
  ExprList *pEList     /* Substitute values */
){
  int i;
  if( pList==0 ) return;
  for(i=0; i<pList->nExpr; i++){
    pList->a[i].pExpr = substExpr(db, pList->a[i].pExpr, iTable, pEList);
  }
}
static void substSelect(
  sqlite3 *db,         /* Report malloc errors here */
  Select *p,           /* SELECT statement in which to make substitutions */
  int iTable,          /* Table to be replaced */
  ExprList *pEList,    /* Substitute values */
  int doPrior          /* Do substitutes on p->pPrior too */
){
  SrcList *pSrc;
  struct SrcList_item *pItem;
  int i;
  if( !p ) return;
  do{
    substExprList(db, p->pEList, iTable, pEList);
    substExprList(db, p->pGroupBy, iTable, pEList);
    substExprList(db, p->pOrderBy, iTable, pEList);
    p->pHaving = substExpr(db, p->pHaving, iTable, pEList);
    p->pWhere = substExpr(db, p->pWhere, iTable, pEList);
    pSrc = p->pSrc;
    assert( pSrc!=0 );
    for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){
      substSelect(db, pItem->pSelect, iTable, pEList, 1);
      if( pItem->fg.isTabFunc ){
        substExprList(db, pItem->u1.pFuncArg, iTable, pEList);
      }
    }
  }while( doPrior && (p = p->pPrior)!=0 );
}
#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */

#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
/*
** This routine attempts to flatten subqueries as a performance optimization.
** This routine returns 1 if it makes changes and 0 if no flattening occurs.
**
** To understand the concept of flattening, consider the following
** query:
**
**     SELECT a FROM (SELECT x+y AS a FROM t1 WHERE z<100) WHERE a>5
**
** The default way of implementing this query is to execute the
** subquery first and store the results in a temporary table, then
** run the outer query on that temporary table.  This requires two
** passes over the data.  Furthermore, because the temporary table
** has no indices, the WHERE clause on the outer query cannot be
** optimized.
**
** This routine attempts to rewrite queries such as the above into
** a single flat select, like this:
**
**     SELECT x+y AS a FROM t1 WHERE z<100 AND a>5
**
** The code generated for this simplification gives the same result
** but only has to scan the data once.  And because indices might
** exist on the table t1, a complete scan of the data might be
** avoided.
**
** Flattening is only attempted if all of the following are true:
**
**   (1)  The subquery and the outer query do not both use aggregates.
**
**   (2)  The subquery is not an aggregate or (2a) the outer query is not a join
**        and (2b) the outer query does not use subqueries other than the one
**        FROM-clause subquery that is a candidate for flattening.  (2b is
**        due to ticket [2f7170d73bf9abf80] from 2015-02-09.)
**
**   (3)  The subquery is not the right operand of a left outer join
**        (Originally ticket #306.  Strengthened by ticket #3300)
**
**   (4)  The subquery is not DISTINCT.
**
**  (**)  At one point restrictions (4) and (5) defined a subset of DISTINCT
**        sub-queries that were excluded from this optimization. Restriction
**        (4) has since been expanded to exclude all DISTINCT subqueries.
**
**   (6)  The subquery does not use aggregates or the outer query is not
**        DISTINCT.
**
**   (7)  The subquery has a FROM clause.  TODO:  For subqueries without
**        A FROM clause, consider adding a FROM close with the special
**        table sqlite_once that consists of a single row containing a
**        single NULL.
**
**   (8)  The subquery does not use LIMIT or the outer query is not a join.
**
**   (9)  The subquery does not use LIMIT or the outer query does not use
**        aggregates.
**
**  (**)  Restriction (10) was removed from the code on 2005-02-05 but we
**        accidently carried the comment forward until 2014-09-15.  Original
**        text: "The subquery does not use aggregates or the outer query
**        does not use LIMIT."
**
**  (11)  The subquery and the outer query do not both have ORDER BY clauses.
**
**  (**)  Not implemented.  Subsumed into restriction (3).  Was previously
**        a separate restriction deriving from ticket #350.
**
**  (13)  The subquery and outer query do not both use LIMIT.
**
**  (14)  The subquery does not use OFFSET.
**
**  (15)  The outer query is not part of a compound select or the
**        subquery does not have a LIMIT clause.
**        (See ticket #2339 and ticket [02a8e81d44]).
**
**  (16)  The outer query is not an aggregate or the subquery does
**        not contain ORDER BY.  (Ticket #2942)  This used to not matter
**        until we introduced the group_concat() function.
**
**  (17)  The sub-query is not a compound select, or it is a UNION ALL
**        compound clause made up entirely of non-aggregate queries, and
**        the parent query:
**
**          * is not itself part of a compound select,
**          * is not an aggregate or DISTINCT query, and
**          * is not a join
**
**        The parent and sub-query may contain WHERE clauses. Subject to
**        rules (11), (13) and (14), they may also contain ORDER BY,
**        LIMIT and OFFSET clauses.  The subquery cannot use any compound
**        operator other than UNION ALL because all the other compound
**        operators have an implied DISTINCT which is disallowed by
**        restriction (4).
**
**        Also, each component of the sub-query must return the same number
**        of result columns. This is actually a requirement for any compound
**        SELECT statement, but all the code here does is make sure that no
**        such (illegal) sub-query is flattened. The caller will detect the
**        syntax error and return a detailed message.
**
**  (18)  If the sub-query is a compound select, then all terms of the
**        ORDER by clause of the parent must be simple references to
**        columns of the sub-query.
**
**  (19)  The subquery does not use LIMIT or the outer query does not
**        have a WHERE clause.
**
**  (20)  If the sub-query is a compound select, then it must not use
**        an ORDER BY clause.  Ticket #3773.  We could relax this constraint
**        somewhat by saying that the terms of the ORDER BY clause must
**        appear as unmodified result columns in the outer query.  But we
**        have other optimizations in mind to deal with that case.
**
**  (21)  The subquery does not use LIMIT or the outer query is not
**        DISTINCT.  (See ticket [752e1646fc]).
**
**  (22)  The subquery is not a recursive CTE.
**
**  (23)  The parent is not a recursive CTE, or the sub-query is not a
**        compound query. This restriction is because transforming the
**        parent to a compound query confuses the code that handles
**        recursive queries in multiSelect().
**
**  (24)  The subquery is not an aggregate that uses the built-in min() or
**        or max() functions.  (Without this restriction, a query like:
**        "SELECT x FROM (SELECT max(y), x FROM t1)" would not necessarily
**        return the value X for which Y was maximal.)
**
**
** In this routine, the "p" parameter is a pointer to the outer query.
** The subquery is p->pSrc->a[iFrom].  isAgg is true if the outer query
** uses aggregates and subqueryIsAgg is true if the subquery uses aggregates.
**
** If flattening is not attempted, this routine is a no-op and returns 0.
** If flattening is attempted this routine returns 1.
**
** All of the expression analysis must occur on both the outer query and
** the subquery before this routine runs.
*/
static int flattenSubquery(
  Parse *pParse,       /* Parsing context */
  Select *p,           /* The parent or outer SELECT statement */
  int iFrom,           /* Index in p->pSrc->a[] of the inner subquery */
  int isAgg,           /* True if outer SELECT uses aggregate functions */
  int subqueryIsAgg    /* True if the subquery uses aggregate functions */
){
  const char *zSavedAuthContext = pParse->zAuthContext;
  Select *pParent;    /* Current UNION ALL term of the other query */
  Select *pSub;       /* The inner query or "subquery" */
  Select *pSub1;      /* Pointer to the rightmost select in sub-query */
  SrcList *pSrc;      /* The FROM clause of the outer query */
  SrcList *pSubSrc;   /* The FROM clause of the subquery */
  ExprList *pList;    /* The result set of the outer query */
  int iParent;        /* VDBE cursor number of the pSub result set temp table */
  int i;              /* Loop counter */
  Expr *pWhere;                    /* The WHERE clause */
  struct SrcList_item *pSubitem;   /* The subquery */
  sqlite3 *db = pParse->db;

  /* Check to see if flattening is permitted.  Return 0 if not.
  */
  assert( p!=0 );
  assert( p->pPrior==0 );  /* Unable to flatten compound queries */
  if( OptimizationDisabled(db, SQLITE_QueryFlattener) ) return 0;
  pSrc = p->pSrc;
  assert( pSrc && iFrom>=0 && iFrom<pSrc->nSrc );
  pSubitem = &pSrc->a[iFrom];
  iParent = pSubitem->iCursor;
  pSub = pSubitem->pSelect;
  assert( pSub!=0 );
  if( subqueryIsAgg ){
    if( isAgg ) return 0;                                /* Restriction (1)   */
    if( pSrc->nSrc>1 ) return 0;                         /* Restriction (2a)  */
    if( (p->pWhere && ExprHasProperty(p->pWhere,EP_Subquery))
     || (sqlite3ExprListFlags(p->pEList) & EP_Subquery)!=0
     || (sqlite3ExprListFlags(p->pOrderBy) & EP_Subquery)!=0
    ){
      return 0;                                          /* Restriction (2b)  */
    }
  }

  pSubSrc = pSub->pSrc;
  assert( pSubSrc );
  /* Prior to version 3.1.2, when LIMIT and OFFSET had to be simple constants,
  ** not arbitrary expressions, we allowed some combining of LIMIT and OFFSET
  ** because they could be computed at compile-time.  But when LIMIT and OFFSET
  ** became arbitrary expressions, we were forced to add restrictions (13)
  ** and (14). */
  if( pSub->pLimit && p->pLimit ) return 0;              /* Restriction (13) */
  if( pSub->pOffset ) return 0;                          /* Restriction (14) */
  if( (p->selFlags & SF_Compound)!=0 && pSub->pLimit ){
    return 0;                                            /* Restriction (15) */
  }
  if( pSubSrc->nSrc==0 ) return 0;                       /* Restriction (7)  */
  if( pSub->selFlags & SF_Distinct ) return 0;           /* Restriction (5)  */
  if( pSub->pLimit && (pSrc->nSrc>1 || isAgg) ){
     return 0;         /* Restrictions (8)(9) */
  }
  if( (p->selFlags & SF_Distinct)!=0 && subqueryIsAgg ){
     return 0;         /* Restriction (6)  */
  }
  if( p->pOrderBy && pSub->pOrderBy ){
     return 0;                                           /* Restriction (11) */
  }
  if( isAgg && pSub->pOrderBy ) return 0;                /* Restriction (16) */
  if( pSub->pLimit && p->pWhere ) return 0;              /* Restriction (19) */
  if( pSub->pLimit && (p->selFlags & SF_Distinct)!=0 ){
     return 0;         /* Restriction (21) */
  }
  testcase( pSub->selFlags & SF_Recursive );
  testcase( pSub->selFlags & SF_MinMaxAgg );
  if( pSub->selFlags & (SF_Recursive|SF_MinMaxAgg) ){
    return 0; /* Restrictions (22) and (24) */
  }
  if( (p->selFlags & SF_Recursive) && pSub->pPrior ){
    return 0; /* Restriction (23) */
  }

  /* OBSOLETE COMMENT 1:
  ** Restriction 3:  If the subquery is a join, make sure the subquery is
  ** not used as the right operand of an outer join.  Examples of why this
  ** is not allowed:
  **
  **         t1 LEFT OUTER JOIN (t2 JOIN t3)
  **
  ** If we flatten the above, we would get
  **
  **         (t1 LEFT OUTER JOIN t2) JOIN t3
  **
  ** which is not at all the same thing.
  **
  ** OBSOLETE COMMENT 2:
  ** Restriction 12:  If the subquery is the right operand of a left outer
  ** join, make sure the subquery has no WHERE clause.
  ** An examples of why this is not allowed:
  **
  **         t1 LEFT OUTER JOIN (SELECT * FROM t2 WHERE t2.x>0)
  **
  ** If we flatten the above, we would get
  **
  **         (t1 LEFT OUTER JOIN t2) WHERE t2.x>0
  **
  ** But the t2.x>0 test will always fail on a NULL row of t2, which
  ** effectively converts the OUTER JOIN into an INNER JOIN.
  **
  ** THIS OVERRIDES OBSOLETE COMMENTS 1 AND 2 ABOVE:
  ** Ticket #3300 shows that flattening the right term of a LEFT JOIN
  ** is fraught with danger.  Best to avoid the whole thing.  If the
  ** subquery is the right term of a LEFT JOIN, then do not flatten.
  */
  if( (pSubitem->fg.jointype & JT_OUTER)!=0 ){
    return 0;
  }

  /* Restriction 17: If the sub-query is a compound SELECT, then it must
  ** use only the UNION ALL operator. And none of the simple select queries
  ** that make up the compound SELECT are allowed to be aggregate or distinct
  ** queries.
  */
  if( pSub->pPrior ){
    if( pSub->pOrderBy ){
      return 0;  /* Restriction 20 */
    }
    if( isAgg || (p->selFlags & SF_Distinct)!=0 || pSrc->nSrc!=1 ){
      return 0;
    }
    for(pSub1=pSub; pSub1; pSub1=pSub1->pPrior){
      testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct );
      testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Aggregate );
      assert( pSub->pSrc!=0 );
      assert( pSub->pEList->nExpr==pSub1->pEList->nExpr );
      if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0
       || (pSub1->pPrior && pSub1->op!=TK_ALL)
       || pSub1->pSrc->nSrc<1
      ){
        return 0;
      }
      testcase( pSub1->pSrc->nSrc>1 );
    }

    /* Restriction 18. */
    if( p->pOrderBy ){
      int ii;
      for(ii=0; ii<p->pOrderBy->nExpr; ii++){
        if( p->pOrderBy->a[ii].u.x.iOrderByCol==0 ) return 0;
      }
    }
  }

  /***** If we reach this point, flattening is permitted. *****/
  SELECTTRACE(1,pParse,p,("flatten %s.%p from term %d\n",
                   pSub->zSelName, pSub, iFrom));

  /* Authorize the subquery */
  pParse->zAuthContext = pSubitem->zName;
  TESTONLY(i =) sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0);
  testcase( i==SQLITE_DENY );
  pParse->zAuthContext = zSavedAuthContext;

  /* If the sub-query is a compound SELECT statement, then (by restrictions
  ** 17 and 18 above) it must be a UNION ALL and the parent query must
  ** be of the form:
  **
  **     SELECT <expr-list> FROM (<sub-query>) <where-clause>
  **
  ** followed by any ORDER BY, LIMIT and/or OFFSET clauses. This block
  ** creates N-1 copies of the parent query without any ORDER BY, LIMIT or
  ** OFFSET clauses and joins them to the left-hand-side of the original
  ** using UNION ALL operators. In this case N is the number of simple
  ** select statements in the compound sub-query.
  **
  ** Example:
  **
  **     SELECT a+1 FROM (
  **        SELECT x FROM tab
  **        UNION ALL
  **        SELECT y FROM tab
  **        UNION ALL
  **        SELECT abs(z*2) FROM tab2
  **     ) WHERE a!=5 ORDER BY 1
  **
  ** Transformed into:
  **
  **     SELECT x+1 FROM tab WHERE x+1!=5
  **     UNION ALL
  **     SELECT y+1 FROM tab WHERE y+1!=5
  **     UNION ALL
  **     SELECT abs(z*2)+1 FROM tab2 WHERE abs(z*2)+1!=5
  **     ORDER BY 1
  **
  ** We call this the "compound-subquery flattening".
  */
  for(pSub=pSub->pPrior; pSub; pSub=pSub->pPrior){
    Select *pNew;
    ExprList *pOrderBy = p->pOrderBy;
    Expr *pLimit = p->pLimit;
    Expr *pOffset = p->pOffset;
    Select *pPrior = p->pPrior;
    p->pOrderBy = 0;
    p->pSrc = 0;
    p->pPrior = 0;
    p->pLimit = 0;
    p->pOffset = 0;
    pNew = sqlite3SelectDup(db, p, 0);
    sqlite3SelectSetName(pNew, pSub->zSelName);
    p->pOffset = pOffset;
    p->pLimit = pLimit;
    p->pOrderBy = pOrderBy;
    p->pSrc = pSrc;
    p->op = TK_ALL;
    if( pNew==0 ){
      p->pPrior = pPrior;
    }else{
      pNew->pPrior = pPrior;
      if( pPrior ) pPrior->pNext = pNew;
      pNew->pNext = p;
      p->pPrior = pNew;
      SELECTTRACE(2,pParse,p,
         ("compound-subquery flattener creates %s.%p as peer\n",
         pNew->zSelName, pNew));
    }
    if( db->mallocFailed ) return 1;
  }

  /* Begin flattening the iFrom-th entry of the FROM clause
  ** in the outer query.
  */
  pSub = pSub1 = pSubitem->pSelect;

  /* Delete the transient table structure associated with the
  ** subquery
  */
  sqlite3DbFree(db, pSubitem->zDatabase);
  sqlite3DbFree(db, pSubitem->zName);
  sqlite3DbFree(db, pSubitem->zAlias);
  pSubitem->zDatabase = 0;
  pSubitem->zName = 0;
  pSubitem->zAlias = 0;
  pSubitem->pSelect = 0;

  /* Defer deleting the Table object associated with the
  ** subquery until code generation is
  ** complete, since there may still exist Expr.pTab entries that
  ** refer to the subquery even after flattening.  Ticket #3346.
  **
  ** pSubitem->pTab is always non-NULL by test restrictions and tests above.
  */
  if( ALWAYS(pSubitem->pTab!=0) ){
    Table *pTabToDel = pSubitem->pTab;
    if( pTabToDel->nRef==1 ){
      Parse *pToplevel = sqlite3ParseToplevel(pParse);
      pTabToDel->pNextZombie = pToplevel->pZombieTab;
      pToplevel->pZombieTab = pTabToDel;
    }else{
      pTabToDel->nRef--;
    }
    pSubitem->pTab = 0;
  }

  /* The following loop runs once for each term in a compound-subquery
  ** flattening (as described above).  If we are doing a different kind
  ** of flattening - a flattening other than a compound-subquery flattening -
  ** then this loop only runs once.
  **
  ** This loop moves all of the FROM elements of the subquery into the
  ** the FROM clause of the outer query.  Before doing this, remember
  ** the cursor number for the original outer query FROM element in
  ** iParent.  The iParent cursor will never be used.  Subsequent code
  ** will scan expressions looking for iParent references and replace
  ** those references with expressions that resolve to the subquery FROM
  ** elements we are now copying in.
  */
  for(pParent=p; pParent; pParent=pParent->pPrior, pSub=pSub->pPrior){
    int nSubSrc;
    u8 jointype = 0;
    pSubSrc = pSub->pSrc;     /* FROM clause of subquery */
    nSubSrc = pSubSrc->nSrc;  /* Number of terms in subquery FROM clause */
    pSrc = pParent->pSrc;     /* FROM clause of the outer query */

    if( pSrc ){
      assert( pParent==p );  /* First time through the loop */
      jointype = pSubitem->fg.jointype;
    }else{
      assert( pParent!=p );  /* 2nd and subsequent times through the loop */
      pSrc = pParent->pSrc = sqlite3SrcListAppend(db, 0, 0, 0);
      if( pSrc==0 ){
        assert( db->mallocFailed );
        break;
      }
    }

    /* The subquery uses a single slot of the FROM clause of the outer
    ** query.  If the subquery has more than one element in its FROM clause,
    ** then expand the outer query to make space for it to hold all elements
    ** of the subquery.
    **
    ** Example:
    **
    **    SELECT * FROM tabA, (SELECT * FROM sub1, sub2), tabB;
    **
    ** The outer query has 3 slots in its FROM clause.  One slot of the
    ** outer query (the middle slot) is used by the subquery.  The next
    ** block of code will expand the outer query FROM clause to 4 slots.
    ** The middle slot is expanded to two slots in order to make space
    ** for the two elements in the FROM clause of the subquery.
    */
    if( nSubSrc>1 ){
      pParent->pSrc = pSrc = sqlite3SrcListEnlarge(db, pSrc, nSubSrc-1,iFrom+1);
      if( db->mallocFailed ){
        break;
      }
    }

    /* Transfer the FROM clause terms from the subquery into the
    ** outer query.
    */
    for(i=0; i<nSubSrc; i++){
      sqlite3IdListDelete(db, pSrc->a[i+iFrom].pUsing);
      assert( pSrc->a[i+iFrom].fg.isTabFunc==0 );
      pSrc->a[i+iFrom] = pSubSrc->a[i];
      memset(&pSubSrc->a[i], 0, sizeof(pSubSrc->a[i]));
    }
    pSrc->a[iFrom].fg.jointype = jointype;

    /* Now begin substituting subquery result set expressions for
    ** references to the iParent in the outer query.
    **
    ** Example:
    **
    **   SELECT a+5, b*10 FROM (SELECT x*3 AS a, y+10 AS b FROM t1) WHERE a>b;
    **   \                     \_____________ subquery __________/          /
    **    \_____________________ outer query ______________________________/
    **
    ** We look at every expression in the outer query and every place we see
    ** "a" we substitute "x*3" and every place we see "b" we substitute "y+10".
    */
    pList = pParent->pEList;
    for(i=0; i<pList->nExpr; i++){
      if( pList->a[i].zName==0 ){
        char *zName = sqlite3DbStrDup(db, pList->a[i].zSpan);
        sqlite3Dequote(zName);
        pList->a[i].zName = zName;
      }
    }
    if( pSub->pOrderBy ){
      /* At this point, any non-zero iOrderByCol values indicate that the
      ** ORDER BY column expression is identical to the iOrderByCol'th
      ** expression returned by SELECT statement pSub. Since these values
      ** do not necessarily correspond to columns in SELECT statement pParent,
      ** zero them before transfering the ORDER BY clause.
      **
      ** Not doing this may cause an error if a subsequent call to this
      ** function attempts to flatten a compound sub-query into pParent
      ** (the only way this can happen is if the compound sub-query is
      ** currently part of pSub->pSrc). See ticket [d11a6e908f].  */
      ExprList *pOrderBy = pSub->pOrderBy;
      for(i=0; i<pOrderBy->nExpr; i++){
        pOrderBy->a[i].u.x.iOrderByCol = 0;
      }
      assert( pParent->pOrderBy==0 );
      assert( pSub->pPrior==0 );
      pParent->pOrderBy = pOrderBy;
      pSub->pOrderBy = 0;
    }
    pWhere = sqlite3ExprDup(db, pSub->pWhere, 0);
    if( subqueryIsAgg ){
      assert( pParent->pHaving==0 );
      pParent->pHaving = pParent->pWhere;
      pParent->pWhere = pWhere;
      pParent->pHaving = sqlite3ExprAnd(db,
          sqlite3ExprDup(db, pSub->pHaving, 0), pParent->pHaving
      );
      assert( pParent->pGroupBy==0 );
      pParent->pGroupBy = sqlite3ExprListDup(db, pSub->pGroupBy, 0);
    }else{
      pParent->pWhere = sqlite3ExprAnd(db, pWhere, pParent->pWhere);
    }
    substSelect(db, pParent, iParent, pSub->pEList, 0);

    /* The flattened query is distinct if either the inner or the
    ** outer query is distinct.
    */
    pParent->selFlags |= pSub->selFlags & SF_Distinct;

    /*
    ** SELECT ... FROM (SELECT ... LIMIT a OFFSET b) LIMIT x OFFSET y;
    **
    ** One is tempted to try to add a and b to combine the limits.  But this
    ** does not work if either limit is negative.
    */
    if( pSub->pLimit ){
      pParent->pLimit = pSub->pLimit;
      pSub->pLimit = 0;
    }
  }

  /* Finially, delete what is left of the subquery and return
  ** success.
  */
  sqlite3SelectDelete(db, pSub1);

#if SELECTTRACE_ENABLED
  if( sqlite3SelectTrace & 0x100 ){
    SELECTTRACE(0x100,pParse,p,("After flattening:\n"));
    sqlite3TreeViewSelect(0, p, 0);
  }
#endif

  return 1;
}
#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */



#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
/*
** Make copies of relevant WHERE clause terms of the outer query into
** the WHERE clause of subquery.  Example:
**
**    SELECT * FROM (SELECT a AS x, c-d AS y FROM t1) WHERE x=5 AND y=10;
**
** Transformed into:
**
**    SELECT * FROM (SELECT a AS x, c-d AS y FROM t1 WHERE a=5 AND c-d=10)
**     WHERE x=5 AND y=10;
**
** The hope is that the terms added to the inner query will make it more
** efficient.
**
** Do not attempt this optimization if:
**
**   (1) The inner query is an aggregate.  (In that case, we'd really want
**       to copy the outer WHERE-clause terms onto the HAVING clause of the
**       inner query.  But they probably won't help there so do not bother.)
**
**   (2) The inner query is the recursive part of a common table expression.
**
**   (3) The inner query has a LIMIT clause (since the changes to the WHERE
**       close would change the meaning of the LIMIT).
**
**   (4) The inner query is the right operand of a LEFT JOIN.  (The caller
**       enforces this restriction since this routine does not have enough
**       information to know.)
**
**   (5) The WHERE clause expression originates in the ON or USING clause
**       of a LEFT JOIN.
**
** Return 0 if no changes are made and non-zero if one or more WHERE clause
** terms are duplicated into the subquery.
*/
static int pushDownWhereTerms(
  sqlite3 *db,          /* The database connection (for malloc()) */
  Select *pSubq,        /* The subquery whose WHERE clause is to be augmented */
  Expr *pWhere,         /* The WHERE clause of the outer query */
  int iCursor           /* Cursor number of the subquery */
){
  Expr *pNew;
  int nChng = 0;
  Select *pX;           /* For looping over compound SELECTs in pSubq */
  if( pWhere==0 ) return 0;
  for(pX=pSubq; pX; pX=pX->pPrior){
    if( (pX->selFlags & (SF_Aggregate|SF_Recursive))!=0 ){
      testcase( pX->selFlags & SF_Aggregate );
      testcase( pX->selFlags & SF_Recursive );
      testcase( pX!=pSubq );
      return 0; /* restrictions (1) and (2) */
    }
  }
  if( pSubq->pLimit!=0 ){
    return 0; /* restriction (3) */
  }
  while( pWhere->op==TK_AND ){
    nChng += pushDownWhereTerms(db, pSubq, pWhere->pRight, iCursor);
    pWhere = pWhere->pLeft;
  }
  if( ExprHasProperty(pWhere,EP_FromJoin) ) return 0; /* restriction 5 */
  if( sqlite3ExprIsTableConstant(pWhere, iCursor) ){
    nChng++;
    while( pSubq ){
      pNew = sqlite3ExprDup(db, pWhere, 0);
      pNew = substExpr(db, pNew, iCursor, pSubq->pEList);
      pSubq->pWhere = sqlite3ExprAnd(db, pSubq->pWhere, pNew);
      pSubq = pSubq->pPrior;
    }
  }
  return nChng;
}
#endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */

/*
** Based on the contents of the AggInfo structure indicated by the first
** argument, this function checks if the following are true:
**
**    * the query contains just a single aggregate function,
**    * the aggregate function is either min() or max(), and
**    * the argument to the aggregate function is a column value.
**
** If all of the above are true, then WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX
** is returned as appropriate. Also, *ppMinMax is set to point to the
** list of arguments passed to the aggregate before returning.
**
** Or, if the conditions above are not met, *ppMinMax is set to 0 and
** WHERE_ORDERBY_NORMAL is returned.
*/
static u8 minMaxQuery(AggInfo *pAggInfo, ExprList **ppMinMax){
  int eRet = WHERE_ORDERBY_NORMAL;          /* Return value */

  *ppMinMax = 0;
  if( pAggInfo->nFunc==1 ){
    Expr *pExpr = pAggInfo->aFunc[0].pExpr; /* Aggregate function */
    ExprList *pEList = pExpr->x.pList;      /* Arguments to agg function */

    assert( pExpr->op==TK_AGG_FUNCTION );
    if( pEList && pEList->nExpr==1 && pEList->a[0].pExpr->op==TK_AGG_COLUMN ){
      const char *zFunc = pExpr->u.zToken;
      if( sqlite3StrICmp(zFunc, "min")==0 ){
        eRet = WHERE_ORDERBY_MIN;
        *ppMinMax = pEList;
      }else if( sqlite3StrICmp(zFunc, "max")==0 ){
        eRet = WHERE_ORDERBY_MAX;
        *ppMinMax = pEList;
      }
    }
  }

  assert( *ppMinMax==0 || (*ppMinMax)->nExpr==1 );
  return eRet;
}

/*
** The select statement passed as the first argument is an aggregate query.
** The second argument is the associated aggregate-info object. This
** function tests if the SELECT is of the form:
**
**   SELECT count(*) FROM <tbl>
**
** where table is a database table, not a sub-select or view. If the query
** does match this pattern, then a pointer to the Table object representing
** <tbl> is returned. Otherwise, 0 is returned.
*/
static Table *isSimpleCount(Select *p, AggInfo *pAggInfo){
  Table *pTab;
  Expr *pExpr;

  assert( !p->pGroupBy );

  if( p->pWhere || p->pEList->nExpr!=1
   || p->pSrc->nSrc!=1 || p->pSrc->a[0].pSelect
  ){
    return 0;
  }
  pTab = p->pSrc->a[0].pTab;
  pExpr = p->pEList->a[0].pExpr;
  assert( pTab && !pTab->pSelect && pExpr );

  if( IsVirtual(pTab) ) return 0;
  if( pExpr->op!=TK_AGG_FUNCTION ) return 0;
  if( NEVER(pAggInfo->nFunc==0) ) return 0;
  if( (pAggInfo->aFunc[0].pFunc->funcFlags&SQLITE_FUNC_COUNT)==0 ) return 0;
  if( pExpr->flags&EP_Distinct ) return 0;

  return pTab;
}

/*
** If the source-list item passed as an argument was augmented with an
** INDEXED BY clause, then try to locate the specified index. If there
** was such a clause and the named index cannot be found, return
** SQLITE_ERROR and leave an error in pParse. Otherwise, populate
** pFrom->pIndex and return SQLITE_OK.
*/
int sqlite3IndexedByLookup(Parse *pParse, struct SrcList_item *pFrom){
  if( pFrom->pTab && pFrom->fg.isIndexedBy ){
    Table *pTab = pFrom->pTab;
    char *zIndexedBy = pFrom->u1.zIndexedBy;
    Index *pIdx;
    for(pIdx=pTab->pIndex;
        pIdx && sqlite3StrICmp(pIdx->zName, zIndexedBy);
        pIdx=pIdx->pNext
    );
    if( !pIdx ){
      sqlite3ErrorMsg(pParse, "no such index: %s", zIndexedBy, 0);
      pParse->checkSchema = 1;
      return SQLITE_ERROR;
    }
    pFrom->pIBIndex = pIdx;
  }
  return SQLITE_OK;
}
/*
** Detect compound SELECT statements that use an ORDER BY clause with
** an alternative collating sequence.
**
**    SELECT ... FROM t1 EXCEPT SELECT ... FROM t2 ORDER BY .. COLLATE ...
**
** These are rewritten as a subquery:
**
**    SELECT * FROM (SELECT ... FROM t1 EXCEPT SELECT ... FROM t2)
**     ORDER BY ... COLLATE ...
**
** This transformation is necessary because the multiSelectOrderBy() routine
** above that generates the code for a compound SELECT with an ORDER BY clause
** uses a merge algorithm that requires the same collating sequence on the
** result columns as on the ORDER BY clause.  See ticket
** http://www.sqlite.org/src/info/6709574d2a
**
** This transformation is only needed for EXCEPT, INTERSECT, and UNION.
** The UNION ALL operator works fine with multiSelectOrderBy() even when
** there are COLLATE terms in the ORDER BY.
*/
static int convertCompoundSelectToSubquery(Walker *pWalker, Select *p){
  int i;
  Select *pNew;
  Select *pX;
  sqlite3 *db;
  struct ExprList_item *a;
  SrcList *pNewSrc;
  Parse *pParse;
  Token dummy;

  if( p->pPrior==0 ) return WRC_Continue;
  if( p->pOrderBy==0 ) return WRC_Continue;
  for(pX=p; pX && (pX->op==TK_ALL || pX->op==TK_SELECT); pX=pX->pPrior){}
  if( pX==0 ) return WRC_Continue;
  a = p->pOrderBy->a;
  for(i=p->pOrderBy->nExpr-1; i>=0; i--){
    if( a[i].pExpr->flags & EP_Collate ) break;
  }
  if( i<0 ) return WRC_Continue;

  /* If we reach this point, that means the transformation is required. */

  pParse = pWalker->pParse;
  db = pParse->db;
  pNew = sqlite3DbMallocZero(db, sizeof(*pNew) );
  if( pNew==0 ) return WRC_Abort;
  memset(&dummy, 0, sizeof(dummy));
  pNewSrc = sqlite3SrcListAppendFromTerm(pParse,0,0,0,&dummy,pNew,0,0);
  if( pNewSrc==0 ) return WRC_Abort;
  *pNew = *p;
  p->pSrc = pNewSrc;
  p->pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ASTERISK, 0));
  p->op = TK_SELECT;
  p->pWhere = 0;
  pNew->pGroupBy = 0;
  pNew->pHaving = 0;
  pNew->pOrderBy = 0;
  p->pPrior = 0;
  p->pNext = 0;
  p->pWith = 0;
  p->selFlags &= ~SF_Compound;
  assert( (p->selFlags & SF_Converted)==0 );
  p->selFlags |= SF_Converted;
  assert( pNew->pPrior!=0 );
  pNew->pPrior->pNext = pNew;
  pNew->pLimit = 0;
  pNew->pOffset = 0;
  return WRC_Continue;
}

/*
** Check to see if the FROM clause term pFrom has table-valued function
** arguments.  If it does, leave an error message in pParse and return
** non-zero, since pFrom is not allowed to be a table-valued function.
*/
static int cannotBeFunction(Parse *pParse, struct SrcList_item *pFrom){
  if( pFrom->fg.isTabFunc ){
    sqlite3ErrorMsg(pParse, "'%s' is not a function", pFrom->zName);
    return 1;
  }
  return 0;
}

#ifndef SQLITE_OMIT_CTE
/*
** Argument pWith (which may be NULL) points to a linked list of nested
** WITH contexts, from inner to outermost. If the table identified by
** FROM clause element pItem is really a common-table-expression (CTE)
** then return a pointer to the CTE definition for that table. Otherwise
** return NULL.
**
** If a non-NULL value is returned, set *ppContext to point to the With
** object that the returned CTE belongs to.
*/
static struct Cte *searchWith(
  With *pWith,                    /* Current innermost WITH clause */
  struct SrcList_item *pItem,     /* FROM clause element to resolve */
  With **ppContext                /* OUT: WITH clause return value belongs to */
){
  const char *zName;
  if( pItem->zDatabase==0 && (zName = pItem->zName)!=0 ){
    With *p;
    for(p=pWith; p; p=p->pOuter){
      int i;
      for(i=0; i<p->nCte; i++){
        if( sqlite3StrICmp(zName, p->a[i].zName)==0 ){
          *ppContext = p;
          return &p->a[i];
        }
      }
    }
  }
  return 0;
}

/* The code generator maintains a stack of active WITH clauses
** with the inner-most WITH clause being at the top of the stack.
**
** This routine pushes the WITH clause passed as the second argument
** onto the top of the stack. If argument bFree is true, then this
** WITH clause will never be popped from the stack. In this case it
** should be freed along with the Parse object. In other cases, when
** bFree==0, the With object will be freed along with the SELECT
** statement with which it is associated.
*/
void sqlite3WithPush(Parse *pParse, With *pWith, u8 bFree){
  assert( bFree==0 || (pParse->pWith==0 && pParse->pWithToFree==0) );
  if( pWith ){
    assert( pParse->pWith!=pWith );
    pWith->pOuter = pParse->pWith;
    pParse->pWith = pWith;
    if( bFree ) pParse->pWithToFree = pWith;
  }
}

/*
** This function checks if argument pFrom refers to a CTE declared by
** a WITH clause on the stack currently maintained by the parser. And,
** if currently processing a CTE expression, if it is a recursive
** reference to the current CTE.
**
** If pFrom falls into either of the two categories above, pFrom->pTab
** and other fields are populated accordingly. The caller should check
** (pFrom->pTab!=0) to determine whether or not a successful match
** was found.
**
** Whether or not a match is found, SQLITE_OK is returned if no error
** occurs. If an error does occur, an error message is stored in the
** parser and some error code other than SQLITE_OK returned.
*/
static int withExpand(
  Walker *pWalker,
  struct SrcList_item *pFrom
){
  Parse *pParse = pWalker->pParse;
  sqlite3 *db = pParse->db;
  struct Cte *pCte;               /* Matched CTE (or NULL if no match) */
  With *pWith;                    /* WITH clause that pCte belongs to */

  assert( pFrom->pTab==0 );

  pCte = searchWith(pParse->pWith, pFrom, &pWith);
  if( pCte ){
    Table *pTab;
    ExprList *pEList;
    Select *pSel;
    Select *pLeft;                /* Left-most SELECT statement */
    int bMayRecursive;            /* True if compound joined by UNION [ALL] */
    With *pSavedWith;             /* Initial value of pParse->pWith */

    /* If pCte->zCteErr is non-NULL at this point, then this is an illegal
    ** recursive reference to CTE pCte. Leave an error in pParse and return
    ** early. If pCte->zCteErr is NULL, then this is not a recursive reference.
    ** In this case, proceed.  */
    if( pCte->zCteErr ){
      sqlite3ErrorMsg(pParse, pCte->zCteErr, pCte->zName);
      return SQLITE_ERROR;
    }
    if( cannotBeFunction(pParse, pFrom) ) return SQLITE_ERROR;

    assert( pFrom->pTab==0 );
    pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table));
    if( pTab==0 ) return WRC_Abort;
    pTab->nRef = 1;
    pTab->zName = sqlite3DbStrDup(db, pCte->zName);
    pTab->iPKey = -1;
    pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
    pTab->tabFlags |= TF_Ephemeral | TF_NoVisibleRowid;
    pFrom->pSelect = sqlite3SelectDup(db, pCte->pSelect, 0);
    if( db->mallocFailed ) return SQLITE_NOMEM_BKPT;
    assert( pFrom->pSelect );

    /* Check if this is a recursive CTE. */
    pSel = pFrom->pSelect;
    bMayRecursive = ( pSel->op==TK_ALL || pSel->op==TK_UNION );
    if( bMayRecursive ){
      int i;
      SrcList *pSrc = pFrom->pSelect->pSrc;
      for(i=0; i<pSrc->nSrc; i++){
        struct SrcList_item *pItem = &pSrc->a[i];
        if( pItem->zDatabase==0
         && pItem->zName!=0
         && 0==sqlite3StrICmp(pItem->zName, pCte->zName)
          ){
          pItem->pTab = pTab;
          pItem->fg.isRecursive = 1;
          pTab->nRef++;
          pSel->selFlags |= SF_Recursive;
        }
      }
    }

    /* Only one recursive reference is permitted. */
    if( pTab->nRef>2 ){
      sqlite3ErrorMsg(
          pParse, "multiple references to recursive table: %s", pCte->zName
      );
      return SQLITE_ERROR;
    }
    assert( pTab->nRef==1 || ((pSel->selFlags&SF_Recursive) && pTab->nRef==2 ));

    pCte->zCteErr = "circular reference: %s";
    pSavedWith = pParse->pWith;
    pParse->pWith = pWith;
    sqlite3WalkSelect(pWalker, bMayRecursive ? pSel->pPrior : pSel);
    pParse->pWith = pWith;

    for(pLeft=pSel; pLeft->pPrior; pLeft=pLeft->pPrior);
    pEList = pLeft->pEList;
    if( pCte->pCols ){
      if( pEList && pEList->nExpr!=pCte->pCols->nExpr ){
        sqlite3ErrorMsg(pParse, "table %s has %d values for %d columns",
            pCte->zName, pEList->nExpr, pCte->pCols->nExpr
        );
        pParse->pWith = pSavedWith;
        return SQLITE_ERROR;
      }
      pEList = pCte->pCols;
    }

    sqlite3ColumnsFromExprList(pParse, pEList, &pTab->nCol, &pTab->aCol);
    if( bMayRecursive ){
      if( pSel->selFlags & SF_Recursive ){
        pCte->zCteErr = "multiple recursive references: %s";
      }else{
        pCte->zCteErr = "recursive reference in a subquery: %s";
      }
      sqlite3WalkSelect(pWalker, pSel);
    }
    pCte->zCteErr = 0;
    pParse->pWith = pSavedWith;
  }

  return SQLITE_OK;
}
#endif

#ifndef SQLITE_OMIT_CTE
/*
** If the SELECT passed as the second argument has an associated WITH
** clause, pop it from the stack stored as part of the Parse object.
**
** This function is used as the xSelectCallback2() callback by
** sqlite3SelectExpand() when walking a SELECT tree to resolve table
** names and other FROM clause elements.
*/
static void selectPopWith(Walker *pWalker, Select *p){
  Parse *pParse = pWalker->pParse;
  With *pWith = findRightmost(p)->pWith;
  if( pWith!=0 ){
    assert( pParse->pWith==pWith );
    pParse->pWith = pWith->pOuter;
  }
}
#else
#define selectPopWith 0
#endif

/*
** This routine is a Walker callback for "expanding" a SELECT statement.
** "Expanding" means to do the following:
**
**    (1)  Make sure VDBE cursor numbers have been assigned to every
**         element of the FROM clause.
**
**    (2)  Fill in the pTabList->a[].pTab fields in the SrcList that
**         defines FROM clause.  When views appear in the FROM clause,
**         fill pTabList->a[].pSelect with a copy of the SELECT statement
**         that implements the view.  A copy is made of the view's SELECT
**         statement so that we can freely modify or delete that statement
**         without worrying about messing up the persistent representation
**         of the view.
**
**    (3)  Add terms to the WHERE clause to accommodate the NATURAL keyword
**         on joins and the ON and USING clause of joins.
**
**    (4)  Scan the list of columns in the result set (pEList) looking
**         for instances of the "*" operator or the TABLE.* operator.
**         If found, expand each "*" to be every column in every table
**         and TABLE.* to be every column in TABLE.
**
*/
static int selectExpander(Walker *pWalker, Select *p){
  Parse *pParse = pWalker->pParse;
  int i, j, k;
  SrcList *pTabList;
  ExprList *pEList;
  struct SrcList_item *pFrom;
  sqlite3 *db = pParse->db;
  Expr *pE, *pRight, *pExpr;
  u16 selFlags = p->selFlags;

  p->selFlags |= SF_Expanded;
  if( db->mallocFailed  ){
    return WRC_Abort;
  }
  if( NEVER(p->pSrc==0) || (selFlags & SF_Expanded)!=0 ){
    return WRC_Prune;
  }
  pTabList = p->pSrc;
  pEList = p->pEList;
  if( pWalker->xSelectCallback2==selectPopWith ){
    sqlite3WithPush(pParse, findRightmost(p)->pWith, 0);
  }

  /* Make sure cursor numbers have been assigned to all entries in
  ** the FROM clause of the SELECT statement.
  */
  sqlite3SrcListAssignCursors(pParse, pTabList);

  /* Look up every table named in the FROM clause of the select.  If
  ** an entry of the FROM clause is a subquery instead of a table or view,
  ** then create a transient table structure to describe the subquery.
  */
  for(i=0, pFrom=pTabList->a; i<pTabList->nSrc; i++, pFrom++){
    Table *pTab;
    assert( pFrom->fg.isRecursive==0 || pFrom->pTab!=0 );
    if( pFrom->fg.isRecursive ) continue;
    assert( pFrom->pTab==0 );
#ifndef SQLITE_OMIT_CTE
    if( withExpand(pWalker, pFrom) ) return WRC_Abort;
    if( pFrom->pTab ) {} else
#endif
    if( pFrom->zName==0 ){
#ifndef SQLITE_OMIT_SUBQUERY
      Select *pSel = pFrom->pSelect;
      /* A sub-query in the FROM clause of a SELECT */
      assert( pSel!=0 );
      assert( pFrom->pTab==0 );
      if( sqlite3WalkSelect(pWalker, pSel) ) return WRC_Abort;
      pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table));
      if( pTab==0 ) return WRC_Abort;
      pTab->nRef = 1;
      pTab->zName = sqlite3MPrintf(db, "sqlite_sq_%p", (void*)pTab);
      while( pSel->pPrior ){ pSel = pSel->pPrior; }
      sqlite3ColumnsFromExprList(pParse, pSel->pEList,&pTab->nCol,&pTab->aCol);
      pTab->iPKey = -1;
      pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) );
      pTab->tabFlags |= TF_Ephemeral;
#endif
    }else{
      /* An ordinary table or view name in the FROM clause */
      assert( pFrom->pTab==0 );
      pFrom->pTab = pTab = sqlite3LocateTableItem(pParse, 0, pFrom);
      if( pTab==0 ) return WRC_Abort;
      if( pTab->nRef==0xffff ){
        sqlite3ErrorMsg(pParse, "too many references to \"%s\": max 65535",
           pTab->zName);
        pFrom->pTab = 0;
        return WRC_Abort;
      }
      pTab->nRef++;
      if( !IsVirtual(pTab) && cannotBeFunction(pParse, pFrom) ){
        return WRC_Abort;
      }
#if !defined(SQLITE_OMIT_VIEW) || !defined (SQLITE_OMIT_VIRTUALTABLE)
      if( IsVirtual(pTab) || pTab->pSelect ){
        i16 nCol;
        if( sqlite3ViewGetColumnNames(pParse, pTab) ) return WRC_Abort;
        assert( pFrom->pSelect==0 );
        pFrom->pSelect = sqlite3SelectDup(db, pTab->pSelect, 0);
        sqlite3SelectSetName(pFrom->pSelect, pTab->zName);
        nCol = pTab->nCol;
        pTab->nCol = -1;
        sqlite3WalkSelect(pWalker, pFrom->pSelect);
        pTab->nCol = nCol;
      }
#endif
    }

    /* Locate the index named by the INDEXED BY clause, if any. */
    if( sqlite3IndexedByLookup(pParse, pFrom) ){
      return WRC_Abort;
    }
  }

  /* Process NATURAL keywords, and ON and USING clauses of joins.
  */
  if( db->mallocFailed || sqliteProcessJoin(pParse, p) ){
    return WRC_Abort;
  }

  /* For every "*" that occurs in the column list, insert the names of
  ** all columns in all tables.  And for every TABLE.* insert the names
  ** of all columns in TABLE.  The parser inserted a special expression
  ** with the TK_ASTERISK operator for each "*" that it found in the column
  ** list.  The following code just has to locate the TK_ASTERISK
  ** expressions and expand each one to the list of all columns in
  ** all tables.
  **
  ** The first loop just checks to see if there are any "*" operators
  ** that need expanding.
  */
  for(k=0; k<pEList->nExpr; k++){
    pE = pEList->a[k].pExpr;
    if( pE->op==TK_ASTERISK ) break;
    assert( pE->op!=TK_DOT || pE->pRight!=0 );
    assert( pE->op!=TK_DOT || (pE->pLeft!=0 && pE->pLeft->op==TK_ID) );
    if( pE->op==TK_DOT && pE->pRight->op==TK_ASTERISK ) break;
  }
  if( k<pEList->nExpr ){
    /*
    ** If we get here it means the result set contains one or more "*"
    ** operators that need to be expanded.  Loop through each expression
    ** in the result set and expand them one by one.
    */
    struct ExprList_item *a = pEList->a;
    ExprList *pNew = 0;
    int flags = pParse->db->flags;
    int longNames = (flags & SQLITE_FullColNames)!=0
                      && (flags & SQLITE_ShortColNames)==0;

    for(k=0; k<pEList->nExpr; k++){
      pE = a[k].pExpr;
      pRight = pE->pRight;
      assert( pE->op!=TK_DOT || pRight!=0 );
      if( pE->op!=TK_ASTERISK
       && (pE->op!=TK_DOT || pRight->op!=TK_ASTERISK)
      ){
        /* This particular expression does not need to be expanded.
        */
        pNew = sqlite3ExprListAppend(pParse, pNew, a[k].pExpr);
        if( pNew ){
          pNew->a[pNew->nExpr-1].zName = a[k].zName;
          pNew->a[pNew->nExpr-1].zSpan = a[k].zSpan;
          a[k].zName = 0;
          a[k].zSpan = 0;
        }
        a[k].pExpr = 0;
      }else{
        /* This expression is a "*" or a "TABLE.*" and needs to be
        ** expanded. */
        int tableSeen = 0;      /* Set to 1 when TABLE matches */
        char *zTName = 0;       /* text of name of TABLE */
        if( pE->op==TK_DOT ){
          assert( pE->pLeft!=0 );
          assert( !ExprHasProperty(pE->pLeft, EP_IntValue) );
          zTName = pE->pLeft->u.zToken;
        }
        for(i=0, pFrom=pTabList->a; i<pTabList->nSrc; i++, pFrom++){
          Table *pTab = pFrom->pTab;
          Select *pSub = pFrom->pSelect;
          char *zTabName = pFrom->zAlias;
          const char *zSchemaName = 0;
          int iDb;
          if( zTabName==0 ){
            zTabName = pTab->zName;
          }
          if( db->mallocFailed ) break;
          if( pSub==0 || (pSub->selFlags & SF_NestedFrom)==0 ){
            pSub = 0;
            if( zTName && sqlite3StrICmp(zTName, zTabName)!=0 ){
              continue;
            }
            iDb = sqlite3SchemaToIndex(db, pTab->pSchema);
            zSchemaName = iDb>=0 ? db->aDb[iDb].zDbSName : "*";
          }
          for(j=0; j<pTab->nCol; j++){
            char *zName = pTab->aCol[j].zName;
            char *zColname;  /* The computed column name */
            char *zToFree;   /* Malloced string that needs to be freed */
            Token sColname;  /* Computed column name as a token */

            assert( zName );
            if( zTName && pSub
             && sqlite3MatchSpanName(pSub->pEList->a[j].zSpan, 0, zTName, 0)==0
            ){
              continue;
            }

            /* If a column is marked as 'hidden', omit it from the expanded
            ** result-set list unless the SELECT has the SF_IncludeHidden
            ** bit set.
            */
            if( (p->selFlags & SF_IncludeHidden)==0
             && IsHiddenColumn(&pTab->aCol[j])
            ){
              continue;
            }
            tableSeen = 1;

            if( i>0 && zTName==0 ){
              if( (pFrom->fg.jointype & JT_NATURAL)!=0
                && tableAndColumnIndex(pTabList, i, zName, 0, 0)
              ){
                /* In a NATURAL join, omit the join columns from the
                ** table to the right of the join */
                continue;
              }
              if( sqlite3IdListIndex(pFrom->pUsing, zName)>=0 ){
                /* In a join with a USING clause, omit columns in the
                ** using clause from the table on the right. */
                continue;
              }
            }
            pRight = sqlite3Expr(db, TK_ID, zName);
            zColname = zName;
            zToFree = 0;
            if( longNames || pTabList->nSrc>1 ){
              Expr *pLeft;
              pLeft = sqlite3Expr(db, TK_ID, zTabName);
              pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0);
              if( zSchemaName ){
                pLeft = sqlite3Expr(db, TK_ID, zSchemaName);
                pExpr = sqlite3PExpr(pParse, TK_DOT, pLeft, pExpr, 0);
              }
              if( longNames ){
                zColname = sqlite3MPrintf(db, "%s.%s", zTabName, zName);
                zToFree = zColname;
              }
            }else{
              pExpr = pRight;
            }
            pNew = sqlite3ExprListAppend(pParse, pNew, pExpr);
            sqlite3TokenInit(&sColname, zColname);
            sqlite3ExprListSetName(pParse, pNew, &sColname, 0);
            if( pNew && (p->selFlags & SF_NestedFrom)!=0 ){
              struct ExprList_item *pX = &pNew->a[pNew->nExpr-1];
              if( pSub ){
                pX->zSpan = sqlite3DbStrDup(db, pSub->pEList->a[j].zSpan);
                testcase( pX->zSpan==0 );
              }else{
                pX->zSpan = sqlite3MPrintf(db, "%s.%s.%s",
                                           zSchemaName, zTabName, zColname);
                testcase( pX->zSpan==0 );
              }
              pX->bSpanIsTab = 1;
            }
            sqlite3DbFree(db, zToFree);
          }
        }
        if( !tableSeen ){
          if( zTName ){
            sqlite3ErrorMsg(pParse, "no such table: %s", zTName);
          }else{
            sqlite3ErrorMsg(pParse, "no tables specified");
          }
        }
      }
    }
    sqlite3ExprListDelete(db, pEList);
    p->pEList = pNew;
  }
#if SQLITE_MAX_COLUMN
  if( p->pEList && p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){
    sqlite3ErrorMsg(pParse, "too many columns in result set");
    return WRC_Abort;
  }
#endif
  return WRC_Continue;
}

/*
** No-op routine for the parse-tree walker.
**
** When this routine is the Walker.xExprCallback then expression trees
** are walked without any actions being taken at each node.  Presumably,
** when this routine is used for Walker.xExprCallback then
** Walker.xSelectCallback is set to do something useful for every
** subquery in the parser tree.
*/
int sqlite3ExprWalkNoop(Walker *NotUsed, Expr *NotUsed2){
  UNUSED_PARAMETER2(NotUsed, NotUsed2);
  return WRC_Continue;
}

/*
** This routine "expands" a SELECT statement and all of its subqueries.
** For additional information on what it means to "expand" a SELECT
** statement, see the comment on the selectExpand worker callback above.
**
** Expanding a SELECT statement is the first step in processing a
** SELECT statement.  The SELECT statement must be expanded before
** name resolution is performed.
**
** If anything goes wrong, an error message is written into pParse.
** The calling function can detect the problem by looking at pParse->nErr
** and/or pParse->db->mallocFailed.
*/
static void sqlite3SelectExpand(Parse *pParse, Select *pSelect){
  Walker w;
  memset(&w, 0, sizeof(w));
  w.xExprCallback = sqlite3ExprWalkNoop;
  w.pParse = pParse;
  if( pParse->hasCompound ){
    w.xSelectCallback = convertCompoundSelectToSubquery;
    sqlite3WalkSelect(&w, pSelect);
  }
  w.xSelectCallback = selectExpander;
  if( (pSelect->selFlags & SF_MultiValue)==0 ){
    w.xSelectCallback2 = selectPopWith;
  }
  sqlite3WalkSelect(&w, pSelect);
}


#ifndef SQLITE_OMIT_SUBQUERY
/*
** This is a Walker.xSelectCallback callback for the sqlite3SelectTypeInfo()
** interface.
**
** For each FROM-clause subquery, add Column.zType and Column.zColl
** information to the Table structure that represents the result set
** of that subquery.
**
** The Table structure that represents the result set was constructed
** by selectExpander() but the type and collation information was omitted
** at that point because identifiers had not yet been resolved.  This
** routine is called after identifier resolution.
*/
static void selectAddSubqueryTypeInfo(Walker *pWalker, Select *p){
  Parse *pParse;
  int i;
  SrcList *pTabList;
  struct SrcList_item *pFrom;

  assert( p->selFlags & SF_Resolved );
  assert( (p->selFlags & SF_HasTypeInfo)==0 );
  p->selFlags |= SF_HasTypeInfo;
  pParse = pWalker->pParse;
  pTabList = p->pSrc;
  for(i=0, pFrom=pTabList->a; i<pTabList->nSrc; i++, pFrom++){
    Table *pTab = pFrom->pTab;
    assert( pTab!=0 );
    if( (pTab->tabFlags & TF_Ephemeral)!=0 ){
      /* A sub-query in the FROM clause of a SELECT */
      Select *pSel = pFrom->pSelect;
      if( pSel ){
        while( pSel->pPrior ) pSel = pSel->pPrior;
        sqlite3SelectAddColumnTypeAndCollation(pParse, pTab, pSel);
      }
    }
  }
}
#endif


/*
** This routine adds datatype and collating sequence information to
** the Table structures of all FROM-clause subqueries in a
** SELECT statement.
**
** Use this routine after name resolution.
*/
static void sqlite3SelectAddTypeInfo(Parse *pParse, Select *pSelect){
#ifndef SQLITE_OMIT_SUBQUERY
  Walker w;
  memset(&w, 0, sizeof(w));
  w.xSelectCallback2 = selectAddSubqueryTypeInfo;
  w.xExprCallback = sqlite3ExprWalkNoop;
  w.pParse = pParse;
  sqlite3WalkSelect(&w, pSelect);
#endif
}


/*
** This routine sets up a SELECT statement for processing.  The
** following is accomplished:
**
**     *  VDBE Cursor numbers are assigned to all FROM-clause terms.
**     *  Ephemeral Table objects are created for all FROM-clause subqueries.
**     *  ON and USING clauses are shifted into WHERE statements
**     *  Wildcards "*" and "TABLE.*" in result sets are expanded.
**     *  Identifiers in expression are matched to tables.
**
** This routine acts recursively on all subqueries within the SELECT.
*/
void sqlite3SelectPrep(
  Parse *pParse,         /* The parser context */
  Select *p,             /* The SELECT statement being coded. */
  NameContext *pOuterNC  /* Name context for container */
){
  sqlite3 *db;
  if( NEVER(p==0) ) return;
  db = pParse->db;
  if( db->mallocFailed ) return;
  if( p->selFlags & SF_HasTypeInfo ) return;
  sqlite3SelectExpand(pParse, p);
  if( pParse->nErr || db->mallocFailed ) return;
  sqlite3ResolveSelectNames(pParse, p, pOuterNC);
  if( pParse->nErr || db->mallocFailed ) return;
  sqlite3SelectAddTypeInfo(pParse, p);
}

/*
** Reset the aggregate accumulator.
**
** The aggregate accumulator is a set of memory cells that hold
** intermediate results while calculating an aggregate.  This
** routine generates code that stores NULLs in all of those memory
** cells.
*/
static void resetAccumulator(Parse *pParse, AggInfo *pAggInfo){
  Vdbe *v = pParse->pVdbe;
  int i;
  struct AggInfo_func *pFunc;
  int nReg = pAggInfo->nFunc + pAggInfo->nColumn;
  if( nReg==0 ) return;
#ifdef SQLITE_DEBUG
  /* Verify that all AggInfo registers are within the range specified by
  ** AggInfo.mnReg..AggInfo.mxReg */
  assert( nReg==pAggInfo->mxReg-pAggInfo->mnReg+1 );
  for(i=0; i<pAggInfo->nColumn; i++){
    assert( pAggInfo->aCol[i].iMem>=pAggInfo->mnReg
         && pAggInfo->aCol[i].iMem<=pAggInfo->mxReg );
  }
  for(i=0; i<pAggInfo->nFunc; i++){
    assert( pAggInfo->aFunc[i].iMem>=pAggInfo->mnReg
         && pAggInfo->aFunc[i].iMem<=pAggInfo->mxReg );
  }
#endif
  sqlite3VdbeAddOp3(v, OP_Null, 0, pAggInfo->mnReg, pAggInfo->mxReg);
  for(pFunc=pAggInfo->aFunc, i=0; i<pAggInfo->nFunc; i++, pFunc++){
    if( pFunc->iDistinct>=0 ){
      Expr *pE = pFunc->pExpr;
      assert( !ExprHasProperty(pE, EP_xIsSelect) );
      if( pE->x.pList==0 || pE->x.pList->nExpr!=1 ){
        sqlite3ErrorMsg(pParse, "DISTINCT aggregates must have exactly one "
           "argument");
        pFunc->iDistinct = -1;
      }else{
        KeyInfo *pKeyInfo = keyInfoFromExprList(pParse, pE->x.pList, 0, 0);
        sqlite3VdbeAddOp4(v, OP_OpenEphemeral, pFunc->iDistinct, 0, 0,
                          (char*)pKeyInfo, P4_KEYINFO);
      }
    }
  }
}

/*
** Invoke the OP_AggFinalize opcode for every aggregate function
** in the AggInfo structure.
*/
static void finalizeAggFunctions(Parse *pParse, AggInfo *pAggInfo){
  Vdbe *v = pParse->pVdbe;
  int i;
  struct AggInfo_func *pF;
  for(i=0, pF=pAggInfo->aFunc; i<pAggInfo->nFunc; i++, pF++){
    ExprList *pList = pF->pExpr->x.pList;
    assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) );
    sqlite3VdbeAddOp4(v, OP_AggFinal, pF->iMem, pList ? pList->nExpr : 0, 0,
                      (void*)pF->pFunc, P4_FUNCDEF);
  }
}

/*
** Update the accumulator memory cells for an aggregate based on
** the current cursor position.
*/
static void updateAccumulator(Parse *pParse, AggInfo *pAggInfo){
  Vdbe *v = pParse->pVdbe;
  int i;
  int regHit = 0;
  int addrHitTest = 0;
  struct AggInfo_func *pF;
  struct AggInfo_col *pC;

  pAggInfo->directMode = 1;
  for(i=0, pF=pAggInfo->aFunc; i<pAggInfo->nFunc; i++, pF++){
    int nArg;
    int addrNext = 0;
    int regAgg;
    ExprList *pList = pF->pExpr->x.pList;
    assert( !ExprHasProperty(pF->pExpr, EP_xIsSelect) );
    if( pList ){
      nArg = pList->nExpr;
      regAgg = sqlite3GetTempRange(pParse, nArg);
      sqlite3ExprCodeExprList(pParse, pList, regAgg, 0, SQLITE_ECEL_DUP);
    }else{
      nArg = 0;
      regAgg = 0;
    }
    if( pF->iDistinct>=0 ){
      addrNext = sqlite3VdbeMakeLabel(v);
      testcase( nArg==0 );  /* Error condition */
      testcase( nArg>1 );   /* Also an error */
      codeDistinct(pParse, pF->iDistinct, addrNext, 1, regAgg);
    }
    if( pF->pFunc->funcFlags & SQLITE_FUNC_NEEDCOLL ){
      CollSeq *pColl = 0;
      struct ExprList_item *pItem;
      int j;
      assert( pList!=0 );  /* pList!=0 if pF->pFunc has NEEDCOLL */
      for(j=0, pItem=pList->a; !pColl && j<nArg; j++, pItem++){
        pColl = sqlite3ExprCollSeq(pParse, pItem->pExpr);
      }
      if( !pColl ){
        pColl = pParse->db->pDfltColl;
      }
      if( regHit==0 && pAggInfo->nAccumulator ) regHit = ++pParse->nMem;
      sqlite3VdbeAddOp4(v, OP_CollSeq, regHit, 0, 0, (char *)pColl, P4_COLLSEQ);
    }
    sqlite3VdbeAddOp4(v, OP_AggStep0, 0, regAgg, pF->iMem,
                      (void*)pF->pFunc, P4_FUNCDEF);
    sqlite3VdbeChangeP5(v, (u8)nArg);
    sqlite3ExprCacheAffinityChange(pParse, regAgg, nArg);
    sqlite3ReleaseTempRange(pParse, regAgg, nArg);
    if( addrNext ){
      sqlite3VdbeResolveLabel(v, addrNext);
      sqlite3ExprCacheClear(pParse);
    }
  }

  /* Before populating the accumulator registers, clear the column cache.
  ** Otherwise, if any of the required column values are already present
  ** in registers, sqlite3ExprCode() may use OP_SCopy to copy the value
  ** to pC->iMem. But by the time the value is used, the original register
  ** may have been used, invalidating the underlying buffer holding the
  ** text or blob value. See ticket [883034dcb5].
  **
  ** Another solution would be to change the OP_SCopy used to copy cached
  ** values to an OP_Copy.
  */
  if( regHit ){
    addrHitTest = sqlite3VdbeAddOp1(v, OP_If, regHit); VdbeCoverage(v);
  }
  sqlite3ExprCacheClear(pParse);
  for(i=0, pC=pAggInfo->aCol; i<pAggInfo->nAccumulator; i++, pC++){
    sqlite3ExprCode(pParse, pC->pExpr, pC->iMem);
  }
  pAggInfo->directMode = 0;
  sqlite3ExprCacheClear(pParse);
  if( addrHitTest ){
    sqlite3VdbeJumpHere(v, addrHitTest);
  }
}

/*
** Add a single OP_Explain instruction to the VDBE to explain a simple
** count(*) query ("SELECT count(*) FROM pTab").
*/
#ifndef SQLITE_OMIT_EXPLAIN
static void explainSimpleCount(
  Parse *pParse,                  /* Parse context */
  Table *pTab,                    /* Table being queried */
  Index *pIdx                     /* Index used to optimize scan, or NULL */
){
  if( pParse->explain==2 ){
    int bCover = (pIdx!=0 && (HasRowid(pTab) || !IsPrimaryKeyIndex(pIdx)));
    char *zEqp = sqlite3MPrintf(pParse->db, "SCAN TABLE %s%s%s",
        pTab->zName,
        bCover ? " USING COVERING INDEX " : "",
        bCover ? pIdx->zName : ""
    );
    sqlite3VdbeAddOp4(
        pParse->pVdbe, OP_Explain, pParse->iSelectId, 0, 0, zEqp, P4_DYNAMIC
    );
  }
}
#else
# define explainSimpleCount(a,b,c)
#endif

/*
** Generate code for the SELECT statement given in the p argument.
**
** The results are returned according to the SelectDest structure.
** See comments in sqliteInt.h for further information.
**
** This routine returns the number of errors.  If any errors are
** encountered, then an appropriate error message is left in
** pParse->zErrMsg.
**
** This routine does NOT free the Select structure passed in.  The
** calling function needs to do that.
*/
int sqlite3Select(
  Parse *pParse,         /* The parser context */
  Select *p,             /* The SELECT statement being coded. */
  SelectDest *pDest      /* What to do with the query results */
){
  int i, j;              /* Loop counters */
  WhereInfo *pWInfo;     /* Return from sqlite3WhereBegin() */
  Vdbe *v;               /* The virtual machine under construction */
  int isAgg;             /* True for select lists like "count(*)" */
  ExprList *pEList = 0;  /* List of columns to extract. */
  SrcList *pTabList;     /* List of tables to select from */
  Expr *pWhere;          /* The WHERE clause.  May be NULL */
  ExprList *pGroupBy;    /* The GROUP BY clause.  May be NULL */
  Expr *pHaving;         /* The HAVING clause.  May be NULL */
  int rc = 1;            /* Value to return from this function */
  DistinctCtx sDistinct; /* Info on how to code the DISTINCT keyword */
  SortCtx sSort;         /* Info on how to code the ORDER BY clause */
  AggInfo sAggInfo;      /* Information used by aggregate queries */
  int iEnd;              /* Address of the end of the query */
  sqlite3 *db;           /* The database connection */

#ifndef SQLITE_OMIT_EXPLAIN
  int iRestoreSelectId = pParse->iSelectId;
  pParse->iSelectId = pParse->iNextSelectId++;
#endif

  db = pParse->db;
  if( p==0 || db->mallocFailed || pParse->nErr ){
    return 1;
  }
  if( sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0) ) return 1;
  memset(&sAggInfo, 0, sizeof(sAggInfo));
#if SELECTTRACE_ENABLED
  pParse->nSelectIndent++;
  SELECTTRACE(1,pParse,p, ("begin processing:\n"));
  if( sqlite3SelectTrace & 0x100 ){
    sqlite3TreeViewSelect(0, p, 0);
  }
#endif

  assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistFifo );
  assert( p->pOrderBy==0 || pDest->eDest!=SRT_Fifo );
  assert( p->pOrderBy==0 || pDest->eDest!=SRT_DistQueue );
  assert( p->pOrderBy==0 || pDest->eDest!=SRT_Queue );
  if( IgnorableOrderby(pDest) ){
    assert(pDest->eDest==SRT_Exists || pDest->eDest==SRT_Union ||
           pDest->eDest==SRT_Except || pDest->eDest==SRT_Discard ||
           pDest->eDest==SRT_Queue  || pDest->eDest==SRT_DistFifo ||
           pDest->eDest==SRT_DistQueue || pDest->eDest==SRT_Fifo);
    /* If ORDER BY makes no difference in the output then neither does
    ** DISTINCT so it can be removed too. */
    sqlite3ExprListDelete(db, p->pOrderBy);
    p->pOrderBy = 0;
    p->selFlags &= ~SF_Distinct;
  }
  sqlite3SelectPrep(pParse, p, 0);
  memset(&sSort, 0, sizeof(sSort));
  sSort.pOrderBy = p->pOrderBy;
  pTabList = p->pSrc;
  if( pParse->nErr || db->mallocFailed ){
    goto select_end;
  }
  assert( p->pEList!=0 );
  isAgg = (p->selFlags & SF_Aggregate)!=0;
#if SELECTTRACE_ENABLED
  if( sqlite3SelectTrace & 0x100 ){
    SELECTTRACE(0x100,pParse,p, ("after name resolution:\n"));
    sqlite3TreeViewSelect(0, p, 0);
  }
#endif

  /* Try to flatten subqueries in the FROM clause up into the main query
  */
#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
  for(i=0; !p->pPrior && i<pTabList->nSrc; i++){
    struct SrcList_item *pItem = &pTabList->a[i];
    Select *pSub = pItem->pSelect;
    int isAggSub;
    Table *pTab = pItem->pTab;
    if( pSub==0 ) continue;

    /* Catch mismatch in the declared columns of a view and the number of
    ** columns in the SELECT on the RHS */
    if( pTab->nCol!=pSub->pEList->nExpr ){
      sqlite3ErrorMsg(pParse, "expected %d columns for '%s' but got %d",
                      pTab->nCol, pTab->zName, pSub->pEList->nExpr);
      goto select_end;
    }

    isAggSub = (pSub->selFlags & SF_Aggregate)!=0;
    if( flattenSubquery(pParse, p, i, isAgg, isAggSub) ){
      /* This subquery can be absorbed into its parent. */
      if( isAggSub ){
        isAgg = 1;
        p->selFlags |= SF_Aggregate;
      }
      i = -1;
    }
    pTabList = p->pSrc;
    if( db->mallocFailed ) goto select_end;
    if( !IgnorableOrderby(pDest) ){
      sSort.pOrderBy = p->pOrderBy;
    }
  }
#endif

  /* Get a pointer the VDBE under construction, allocating a new VDBE if one
  ** does not already exist */
  v = sqlite3GetVdbe(pParse);
  if( v==0 ) goto select_end;

#ifndef SQLITE_OMIT_COMPOUND_SELECT
  /* Handle compound SELECT statements using the separate multiSelect()
  ** procedure.
  */
  if( p->pPrior ){
    rc = multiSelect(pParse, p, pDest);
    explainSetInteger(pParse->iSelectId, iRestoreSelectId);
#if SELECTTRACE_ENABLED
    SELECTTRACE(1,pParse,p,("end compound-select processing\n"));
    pParse->nSelectIndent--;
#endif
    return rc;
  }
#endif

  /* Generate code for all sub-queries in the FROM clause
  */
#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW)
  for(i=0; i<pTabList->nSrc; i++){
    struct SrcList_item *pItem = &pTabList->a[i];
    SelectDest dest;
    Select *pSub = pItem->pSelect;
    if( pSub==0 ) continue;

    /* Sometimes the code for a subquery will be generated more than
    ** once, if the subquery is part of the WHERE clause in a LEFT JOIN,
    ** for example.  In that case, do not regenerate the code to manifest
    ** a view or the co-routine to implement a view.  The first instance
    ** is sufficient, though the subroutine to manifest the view does need
    ** to be invoked again. */
    if( pItem->addrFillSub ){
      if( pItem->fg.viaCoroutine==0 ){
        sqlite3VdbeAddOp2(v, OP_Gosub, pItem->regReturn, pItem->addrFillSub);
      }
      continue;
    }

    /* Increment Parse.nHeight by the height of the largest expression
    ** tree referred to by this, the parent select. The child select
    ** may contain expression trees of at most
    ** (SQLITE_MAX_EXPR_DEPTH-Parse.nHeight) height. This is a bit
    ** more conservative than necessary, but much easier than enforcing
    ** an exact limit.
    */
    pParse->nHeight += sqlite3SelectExprHeight(p);

    /* Make copies of constant WHERE-clause terms in the outer query down
    ** inside the subquery.  This can help the subquery to run more efficiently.
    */
    if( (pItem->fg.jointype & JT_OUTER)==0
     && pushDownWhereTerms(db, pSub, p->pWhere, pItem->iCursor)
    ){
#if SELECTTRACE_ENABLED
      if( sqlite3SelectTrace & 0x100 ){
        SELECTTRACE(0x100,pParse,p,("After WHERE-clause push-down:\n"));
        sqlite3TreeViewSelect(0, p, 0);
      }
#endif
    }

    /* Generate code to implement the subquery
    **
    ** The subquery is implemented as a co-routine if all of these are true:
    **   (1)  The subquery is guaranteed to be the outer loop (so that it
    **        does not need to be computed more than once)
    **   (2)  The ALL keyword after SELECT is omitted.  (Applications are
    **        allowed to say "SELECT ALL" instead of just "SELECT" to disable
    **        the use of co-routines.)
    **   (3)  Co-routines are not disabled using sqlite3_test_control()
    **        with SQLITE_TESTCTRL_OPTIMIZATIONS.
    **
    ** TODO: Are there other reasons beside (1) to use a co-routine
    ** implementation?
    */
    if( i==0
     && (pTabList->nSrc==1
            || (pTabList->a[1].fg.jointype&(JT_LEFT|JT_CROSS))!=0)  /* (1) */
     && (p->selFlags & SF_All)==0                                   /* (2) */
     && OptimizationEnabled(db, SQLITE_SubqCoroutine)               /* (3) */
    ){
      /* Implement a co-routine that will return a single row of the result
      ** set on each invocation.
      */
      int addrTop = sqlite3VdbeCurrentAddr(v)+1;
      pItem->regReturn = ++pParse->nMem;
      sqlite3VdbeAddOp3(v, OP_InitCoroutine, pItem->regReturn, 0, addrTop);
      VdbeComment((v, "%s", pItem->pTab->zName));
      pItem->addrFillSub = addrTop;
      sqlite3SelectDestInit(&dest, SRT_Coroutine, pItem->regReturn);
      explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId);
      sqlite3Select(pParse, pSub, &dest);
      pItem->pTab->nRowLogEst = pSub->nSelectRow;
      pItem->fg.viaCoroutine = 1;
      pItem->regResult = dest.iSdst;
      sqlite3VdbeEndCoroutine(v, pItem->regReturn);
      sqlite3VdbeJumpHere(v, addrTop-1);
      sqlite3ClearTempRegCache(pParse);
    }else{
      /* Generate a subroutine that will fill an ephemeral table with
      ** the content of this subquery.  pItem->addrFillSub will point
      ** to the address of the generated subroutine.  pItem->regReturn
      ** is a register allocated to hold the subroutine return address
      */
      int topAddr;
      int onceAddr = 0;
      int retAddr;
      assert( pItem->addrFillSub==0 );
      pItem->regReturn = ++pParse->nMem;
      topAddr = sqlite3VdbeAddOp2(v, OP_Integer, 0, pItem->regReturn);
      pItem->addrFillSub = topAddr+1;
      if( pItem->fg.isCorrelated==0 ){
        /* If the subquery is not correlated and if we are not inside of
        ** a trigger, then we only need to compute the value of the subquery
        ** once. */
        onceAddr = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v);
        VdbeComment((v, "materialize \"%s\"", pItem->pTab->zName));
      }else{
        VdbeNoopComment((v, "materialize \"%s\"", pItem->pTab->zName));
      }
      sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor);
      explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId);
      sqlite3Select(pParse, pSub, &dest);
      pItem->pTab->nRowLogEst = pSub->nSelectRow;
      if( onceAddr ) sqlite3VdbeJumpHere(v, onceAddr);
      retAddr = sqlite3VdbeAddOp1(v, OP_Return, pItem->regReturn);
      VdbeComment((v, "end %s", pItem->pTab->zName));
      sqlite3VdbeChangeP1(v, topAddr, retAddr);
      sqlite3ClearTempRegCache(pParse);
    }
    if( db->mallocFailed ) goto select_end;
    pParse->nHeight -= sqlite3SelectExprHeight(p);
  }
#endif

  /* Various elements of the SELECT copied into local variables for
  ** convenience */
  pEList = p->pEList;
  pWhere = p->pWhere;
  pGroupBy = p->pGroupBy;
  pHaving = p->pHaving;
  sDistinct.isTnct = (p->selFlags & SF_Distinct)!=0;

#if SELECTTRACE_ENABLED
  if( sqlite3SelectTrace & 0x400 ){
    SELECTTRACE(0x400,pParse,p,("After all FROM-clause analysis:\n"));
    sqlite3TreeViewSelect(0, p, 0);
  }
#endif

  /* If the query is DISTINCT with an ORDER BY but is not an aggregate, and
  ** if the select-list is the same as the ORDER BY list, then this query
  ** can be rewritten as a GROUP BY. In other words, this:
  **
  **     SELECT DISTINCT xyz FROM ... ORDER BY xyz
  **
  ** is transformed to:
  **
  **     SELECT xyz FROM ... GROUP BY xyz ORDER BY xyz
  **
  ** The second form is preferred as a single index (or temp-table) may be
  ** used for both the ORDER BY and DISTINCT processing. As originally
  ** written the query must use a temp-table for at least one of the ORDER
  ** BY and DISTINCT, and an index or separate temp-table for the other.
  */
  if( (p->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct
   && sqlite3ExprListCompare(sSort.pOrderBy, pEList, -1)==0
  ){
    p->selFlags &= ~SF_Distinct;
    pGroupBy = p->pGroupBy = sqlite3ExprListDup(db, pEList, 0);
    /* Notice that even thought SF_Distinct has been cleared from p->selFlags,
    ** the sDistinct.isTnct is still set.  Hence, isTnct represents the
    ** original setting of the SF_Distinct flag, not the current setting */
    assert( sDistinct.isTnct );

#if SELECTTRACE_ENABLED
    if( sqlite3SelectTrace & 0x400 ){
      SELECTTRACE(0x400,pParse,p,("Transform DISTINCT into GROUP BY:\n"));
      sqlite3TreeViewSelect(0, p, 0);
    }
#endif
  }

  /* If there is an ORDER BY clause, then create an ephemeral index to
  ** do the sorting.  But this sorting ephemeral index might end up
  ** being unused if the data can be extracted in pre-sorted order.
  ** If that is the case, then the OP_OpenEphemeral instruction will be
  ** changed to an OP_Noop once we figure out that the sorting index is
  ** not needed.  The sSort.addrSortIndex variable is used to facilitate
  ** that change.
  */
  if( sSort.pOrderBy ){
    KeyInfo *pKeyInfo;
    pKeyInfo = keyInfoFromExprList(pParse, sSort.pOrderBy, 0, pEList->nExpr);
    sSort.iECursor = pParse->nTab++;
    sSort.addrSortIndex =
      sqlite3VdbeAddOp4(v, OP_OpenEphemeral,
          sSort.iECursor, sSort.pOrderBy->nExpr+1+pEList->nExpr, 0,
          (char*)pKeyInfo, P4_KEYINFO
      );
  }else{
    sSort.addrSortIndex = -1;
  }

  /* If the output is destined for a temporary table, open that table.
  */
  if( pDest->eDest==SRT_EphemTab ){
    sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pDest->iSDParm, pEList->nExpr);
  }

  /* Set the limiter.
  */
  iEnd = sqlite3VdbeMakeLabel(v);
  p->nSelectRow = 320;  /* 4 billion rows */
  computeLimitRegisters(pParse, p, iEnd);
  if( p->iLimit==0 && sSort.addrSortIndex>=0 ){
    sqlite3VdbeChangeOpcode(v, sSort.addrSortIndex, OP_SorterOpen);
    sSort.sortFlags |= SORTFLAG_UseSorter;
  }

  /* Open an ephemeral index to use for the distinct set.
  */
  if( p->selFlags & SF_Distinct ){
    sDistinct.tabTnct = pParse->nTab++;
    sDistinct.addrTnct = sqlite3VdbeAddOp4(v, OP_OpenEphemeral,
                             sDistinct.tabTnct, 0, 0,
                             (char*)keyInfoFromExprList(pParse, p->pEList,0,0),
                             P4_KEYINFO);
    sqlite3VdbeChangeP5(v, BTREE_UNORDERED);
    sDistinct.eTnctType = WHERE_DISTINCT_UNORDERED;
  }else{
    sDistinct.eTnctType = WHERE_DISTINCT_NOOP;
  }

  if( !isAgg && pGroupBy==0 ){
    /* No aggregate functions and no GROUP BY clause */
    u16 wctrlFlags = (sDistinct.isTnct ? WHERE_WANT_DISTINCT : 0);
    assert( WHERE_USE_LIMIT==SF_FixedLimit );
    wctrlFlags |= p->selFlags & SF_FixedLimit;

    /* Begin the database scan. */
    pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, sSort.pOrderBy,
                               p->pEList, wctrlFlags, p->nSelectRow);
    if( pWInfo==0 ) goto select_end;
    if( sqlite3WhereOutputRowCount(pWInfo) < p->nSelectRow ){
      p->nSelectRow = sqlite3WhereOutputRowCount(pWInfo);
    }
    if( sDistinct.isTnct && sqlite3WhereIsDistinct(pWInfo) ){
      sDistinct.eTnctType = sqlite3WhereIsDistinct(pWInfo);
    }
    if( sSort.pOrderBy ){
      sSort.nOBSat = sqlite3WhereIsOrdered(pWInfo);
      sSort.bOrderedInnerLoop = sqlite3WhereOrderedInnerLoop(pWInfo);
      if( sSort.nOBSat==sSort.pOrderBy->nExpr ){
        sSort.pOrderBy = 0;
      }
    }

    /* If sorting index that was created by a prior OP_OpenEphemeral
    ** instruction ended up not being needed, then change the OP_OpenEphemeral
    ** into an OP_Noop.
    */
    if( sSort.addrSortIndex>=0 && sSort.pOrderBy==0 ){
      sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex);
    }

    /* Use the standard inner loop. */
    selectInnerLoop(pParse, p, pEList, -1, &sSort, &sDistinct, pDest,
                    sqlite3WhereContinueLabel(pWInfo),
                    sqlite3WhereBreakLabel(pWInfo));

    /* End the database scan loop.
    */
    sqlite3WhereEnd(pWInfo);
  }else{
    /* This case when there exist aggregate functions or a GROUP BY clause
    ** or both */
    NameContext sNC;    /* Name context for processing aggregate information */
    int iAMem;          /* First Mem address for storing current GROUP BY */
    int iBMem;          /* First Mem address for previous GROUP BY */
    int iUseFlag;       /* Mem address holding flag indicating that at least
                        ** one row of the input to the aggregator has been
                        ** processed */
    int iAbortFlag;     /* Mem address which causes query abort if positive */
    int groupBySort;    /* Rows come from source in GROUP BY order */
    int addrEnd;        /* End of processing for this SELECT */
    int sortPTab = 0;   /* Pseudotable used to decode sorting results */
    int sortOut = 0;    /* Output register from the sorter */
    int orderByGrp = 0; /* True if the GROUP BY and ORDER BY are the same */

    /* Remove any and all aliases between the result set and the
    ** GROUP BY clause.
    */
    if( pGroupBy ){
      int k;                        /* Loop counter */
      struct ExprList_item *pItem;  /* For looping over expression in a list */

      for(k=p->pEList->nExpr, pItem=p->pEList->a; k>0; k--, pItem++){
        pItem->u.x.iAlias = 0;
      }
      for(k=pGroupBy->nExpr, pItem=pGroupBy->a; k>0; k--, pItem++){
        pItem->u.x.iAlias = 0;
      }
      assert( 66==sqlite3LogEst(100) );
      if( p->nSelectRow>66 ) p->nSelectRow = 66;
    }else{
      assert( 0==sqlite3LogEst(1) );
      p->nSelectRow = 0;
    }

    /* If there is both a GROUP BY and an ORDER BY clause and they are
    ** identical, then it may be possible to disable the ORDER BY clause
    ** on the grounds that the GROUP BY will cause elements to come out
    ** in the correct order. It also may not - the GROUP BY might use a
    ** database index that causes rows to be grouped together as required
    ** but not actually sorted. Either way, record the fact that the
    ** ORDER BY and GROUP BY clauses are the same by setting the orderByGrp
    ** variable.  */
    if( sqlite3ExprListCompare(pGroupBy, sSort.pOrderBy, -1)==0 ){
      orderByGrp = 1;
    }

    /* Create a label to jump to when we want to abort the query */
    addrEnd = sqlite3VdbeMakeLabel(v);

    /* Convert TK_COLUMN nodes into TK_AGG_COLUMN and make entries in
    ** sAggInfo for all TK_AGG_FUNCTION nodes in expressions of the
    ** SELECT statement.
    */
    memset(&sNC, 0, sizeof(sNC));
    sNC.pParse = pParse;
    sNC.pSrcList = pTabList;
    sNC.pAggInfo = &sAggInfo;
    sAggInfo.mnReg = pParse->nMem+1;
    sAggInfo.nSortingColumn = pGroupBy ? pGroupBy->nExpr : 0;
    sAggInfo.pGroupBy = pGroupBy;
    sqlite3ExprAnalyzeAggList(&sNC, pEList);
    sqlite3ExprAnalyzeAggList(&sNC, sSort.pOrderBy);
    if( pHaving ){
      sqlite3ExprAnalyzeAggregates(&sNC, pHaving);
    }
    sAggInfo.nAccumulator = sAggInfo.nColumn;
    for(i=0; i<sAggInfo.nFunc; i++){
      assert( !ExprHasProperty(sAggInfo.aFunc[i].pExpr, EP_xIsSelect) );
      sNC.ncFlags |= NC_InAggFunc;
      sqlite3ExprAnalyzeAggList(&sNC, sAggInfo.aFunc[i].pExpr->x.pList);
      sNC.ncFlags &= ~NC_InAggFunc;
    }
    sAggInfo.mxReg = pParse->nMem;
    if( db->mallocFailed ) goto select_end;

    /* Processing for aggregates with GROUP BY is very different and
    ** much more complex than aggregates without a GROUP BY.
    */
    if( pGroupBy ){
      KeyInfo *pKeyInfo;  /* Keying information for the group by clause */
      int addr1;          /* A-vs-B comparision jump */
      int addrOutputRow;  /* Start of subroutine that outputs a result row */
      int regOutputRow;   /* Return address register for output subroutine */
      int addrSetAbort;   /* Set the abort flag and return */
      int addrTopOfLoop;  /* Top of the input loop */
      int addrSortingIdx; /* The OP_OpenEphemeral for the sorting index */
      int addrReset;      /* Subroutine for resetting the accumulator */
      int regReset;       /* Return address register for reset subroutine */

      /* If there is a GROUP BY clause we might need a sorting index to
      ** implement it.  Allocate that sorting index now.  If it turns out
      ** that we do not need it after all, the OP_SorterOpen instruction
      ** will be converted into a Noop.
      */
      sAggInfo.sortingIdx = pParse->nTab++;
      pKeyInfo = keyInfoFromExprList(pParse, pGroupBy, 0, sAggInfo.nColumn);
      addrSortingIdx = sqlite3VdbeAddOp4(v, OP_SorterOpen,
          sAggInfo.sortingIdx, sAggInfo.nSortingColumn,
          0, (char*)pKeyInfo, P4_KEYINFO);

      /* Initialize memory locations used by GROUP BY aggregate processing
      */
      iUseFlag = ++pParse->nMem;
      iAbortFlag = ++pParse->nMem;
      regOutputRow = ++pParse->nMem;
      addrOutputRow = sqlite3VdbeMakeLabel(v);
      regReset = ++pParse->nMem;
      addrReset = sqlite3VdbeMakeLabel(v);
      iAMem = pParse->nMem + 1;
      pParse->nMem += pGroupBy->nExpr;
      iBMem = pParse->nMem + 1;
      pParse->nMem += pGroupBy->nExpr;
      sqlite3VdbeAddOp2(v, OP_Integer, 0, iAbortFlag);
      VdbeComment((v, "clear abort flag"));
      sqlite3VdbeAddOp2(v, OP_Integer, 0, iUseFlag);
      VdbeComment((v, "indicate accumulator empty"));
      sqlite3VdbeAddOp3(v, OP_Null, 0, iAMem, iAMem+pGroupBy->nExpr-1);

      /* Begin a loop that will extract all source rows in GROUP BY order.
      ** This might involve two separate loops with an OP_Sort in between, or
      ** it might be a single loop that uses an index to extract information
      ** in the right order to begin with.
      */
      sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset);
      pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0,
          WHERE_GROUPBY | (orderByGrp ? WHERE_SORTBYGROUP : 0), 0
      );
      if( pWInfo==0 ) goto select_end;
      if( sqlite3WhereIsOrdered(pWInfo)==pGroupBy->nExpr ){
        /* The optimizer is able to deliver rows in group by order so
        ** we do not have to sort.  The OP_OpenEphemeral table will be
        ** cancelled later because we still need to use the pKeyInfo
        */
        groupBySort = 0;
      }else{
        /* Rows are coming out in undetermined order.  We have to push
        ** each row into a sorting index, terminate the first loop,
        ** then loop over the sorting index in order to get the output
        ** in sorted order
        */
        int regBase;
        int regRecord;
        int nCol;
        int nGroupBy;

        explainTempTable(pParse,
            (sDistinct.isTnct && (p->selFlags&SF_Distinct)==0) ?
                    "DISTINCT" : "GROUP BY");

        groupBySort = 1;
        nGroupBy = pGroupBy->nExpr;
        nCol = nGroupBy;
        j = nGroupBy;
        for(i=0; i<sAggInfo.nColumn; i++){
          if( sAggInfo.aCol[i].iSorterColumn>=j ){
            nCol++;
            j++;
          }
        }
        regBase = sqlite3GetTempRange(pParse, nCol);
        sqlite3ExprCacheClear(pParse);
        sqlite3ExprCodeExprList(pParse, pGroupBy, regBase, 0, 0);
        j = nGroupBy;
        for(i=0; i<sAggInfo.nColumn; i++){
          struct AggInfo_col *pCol = &sAggInfo.aCol[i];
          if( pCol->iSorterColumn>=j ){
            int r1 = j + regBase;
            sqlite3ExprCodeGetColumnToReg(pParse,
                               pCol->pTab, pCol->iColumn, pCol->iTable, r1);
            j++;
          }
        }
        regRecord = sqlite3GetTempReg(pParse);
        sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase, nCol, regRecord);
        sqlite3VdbeAddOp2(v, OP_SorterInsert, sAggInfo.sortingIdx, regRecord);
        sqlite3ReleaseTempReg(pParse, regRecord);
        sqlite3ReleaseTempRange(pParse, regBase, nCol);
        sqlite3WhereEnd(pWInfo);
        sAggInfo.sortingIdxPTab = sortPTab = pParse->nTab++;
        sortOut = sqlite3GetTempReg(pParse);
        sqlite3VdbeAddOp3(v, OP_OpenPseudo, sortPTab, sortOut, nCol);
        sqlite3VdbeAddOp2(v, OP_SorterSort, sAggInfo.sortingIdx, addrEnd);
        VdbeComment((v, "GROUP BY sort")); VdbeCoverage(v);
        sAggInfo.useSortingIdx = 1;
        sqlite3ExprCacheClear(pParse);

      }

      /* If the index or temporary table used by the GROUP BY sort
      ** will naturally deliver rows in the order required by the ORDER BY
      ** clause, cancel the ephemeral table open coded earlier.
      **
      ** This is an optimization - the correct answer should result regardless.
      ** Use the SQLITE_GroupByOrder flag with SQLITE_TESTCTRL_OPTIMIZER to
      ** disable this optimization for testing purposes.  */
      if( orderByGrp && OptimizationEnabled(db, SQLITE_GroupByOrder)
       && (groupBySort || sqlite3WhereIsSorted(pWInfo))
      ){
        sSort.pOrderBy = 0;
        sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex);
      }

      /* Evaluate the current GROUP BY terms and store in b0, b1, b2...
      ** (b0 is memory location iBMem+0, b1 is iBMem+1, and so forth)
      ** Then compare the current GROUP BY terms against the GROUP BY terms
      ** from the previous row currently stored in a0, a1, a2...
      */
      addrTopOfLoop = sqlite3VdbeCurrentAddr(v);
      sqlite3ExprCacheClear(pParse);
      if( groupBySort ){
        sqlite3VdbeAddOp3(v, OP_SorterData, sAggInfo.sortingIdx,
                          sortOut, sortPTab);
      }
      for(j=0; j<pGroupBy->nExpr; j++){
        if( groupBySort ){
          sqlite3VdbeAddOp3(v, OP_Column, sortPTab, j, iBMem+j);
        }else{
          sAggInfo.directMode = 1;
          sqlite3ExprCode(pParse, pGroupBy->a[j].pExpr, iBMem+j);
        }
      }
      sqlite3VdbeAddOp4(v, OP_Compare, iAMem, iBMem, pGroupBy->nExpr,
                          (char*)sqlite3KeyInfoRef(pKeyInfo), P4_KEYINFO);
      addr1 = sqlite3VdbeCurrentAddr(v);
      sqlite3VdbeAddOp3(v, OP_Jump, addr1+1, 0, addr1+1); VdbeCoverage(v);

      /* Generate code that runs whenever the GROUP BY changes.
      ** Changes in the GROUP BY are detected by the previous code
      ** block.  If there were no changes, this block is skipped.
      **
      ** This code copies current group by terms in b0,b1,b2,...
      ** over to a0,a1,a2.  It then calls the output subroutine
      ** and resets the aggregate accumulator registers in preparation
      ** for the next GROUP BY batch.
      */
      sqlite3ExprCodeMove(pParse, iBMem, iAMem, pGroupBy->nExpr);
      sqlite3VdbeAddOp2(v, OP_Gosub, regOutputRow, addrOutputRow);
      VdbeComment((v, "output one row"));
      sqlite3VdbeAddOp2(v, OP_IfPos, iAbortFlag, addrEnd); VdbeCoverage(v);
      VdbeComment((v, "check abort flag"));
      sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset);
      VdbeComment((v, "reset accumulator"));

      /* Update the aggregate accumulators based on the content of
      ** the current row
      */
      sqlite3VdbeJumpHere(v, addr1);
      updateAccumulator(pParse, &sAggInfo);
      sqlite3VdbeAddOp2(v, OP_Integer, 1, iUseFlag);
      VdbeComment((v, "indicate data in accumulator"));

      /* End of the loop
      */
      if( groupBySort ){
        sqlite3VdbeAddOp2(v, OP_SorterNext, sAggInfo.sortingIdx, addrTopOfLoop);
        VdbeCoverage(v);
      }else{
        sqlite3WhereEnd(pWInfo);
        sqlite3VdbeChangeToNoop(v, addrSortingIdx);
      }

      /* Output the final row of result
      */
      sqlite3VdbeAddOp2(v, OP_Gosub, regOutputRow, addrOutputRow);
      VdbeComment((v, "output final row"));

      /* Jump over the subroutines
      */
      sqlite3VdbeGoto(v, addrEnd);

      /* Generate a subroutine that outputs a single row of the result
      ** set.  This subroutine first looks at the iUseFlag.  If iUseFlag
      ** is less than or equal to zero, the subroutine is a no-op.  If
      ** the processing calls for the query to abort, this subroutine
      ** increments the iAbortFlag memory location before returning in
      ** order to signal the caller to abort.
      */
      addrSetAbort = sqlite3VdbeCurrentAddr(v);
      sqlite3VdbeAddOp2(v, OP_Integer, 1, iAbortFlag);
      VdbeComment((v, "set abort flag"));
      sqlite3VdbeAddOp1(v, OP_Return, regOutputRow);
      sqlite3VdbeResolveLabel(v, addrOutputRow);
      addrOutputRow = sqlite3VdbeCurrentAddr(v);
      sqlite3VdbeAddOp2(v, OP_IfPos, iUseFlag, addrOutputRow+2);
      VdbeCoverage(v);
      VdbeComment((v, "Groupby result generator entry point"));
      sqlite3VdbeAddOp1(v, OP_Return, regOutputRow);
      finalizeAggFunctions(pParse, &sAggInfo);
      sqlite3ExprIfFalse(pParse, pHaving, addrOutputRow+1, SQLITE_JUMPIFNULL);
      selectInnerLoop(pParse, p, p->pEList, -1, &sSort,
                      &sDistinct, pDest,
                      addrOutputRow+1, addrSetAbort);
      sqlite3VdbeAddOp1(v, OP_Return, regOutputRow);
      VdbeComment((v, "end groupby result generator"));

      /* Generate a subroutine that will reset the group-by accumulator
      */
      sqlite3VdbeResolveLabel(v, addrReset);
      resetAccumulator(pParse, &sAggInfo);
      sqlite3VdbeAddOp1(v, OP_Return, regReset);

    } /* endif pGroupBy.  Begin aggregate queries without GROUP BY: */
    else {
      ExprList *pDel = 0;
#ifndef SQLITE_OMIT_BTREECOUNT
      Table *pTab;
      if( (pTab = isSimpleCount(p, &sAggInfo))!=0 ){
        /* If isSimpleCount() returns a pointer to a Table structure, then
        ** the SQL statement is of the form:
        **
        **   SELECT count(*) FROM <tbl>
        **
        ** where the Table structure returned represents table <tbl>.
        **
        ** This statement is so common that it is optimized specially. The
        ** OP_Count instruction is executed either on the intkey table that
        ** contains the data for table <tbl> or on one of its indexes. It
        ** is better to execute the op on an index, as indexes are almost
        ** always spread across less pages than their corresponding tables.
        */
        const int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
        const int iCsr = pParse->nTab++;     /* Cursor to scan b-tree */
        Index *pIdx;                         /* Iterator variable */
        KeyInfo *pKeyInfo = 0;               /* Keyinfo for scanned index */
        Index *pBest = 0;                    /* Best index found so far */
        int iRoot = pTab->tnum;              /* Root page of scanned b-tree */

        sqlite3CodeVerifySchema(pParse, iDb);
        sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName);

        /* Search for the index that has the lowest scan cost.
        **
        ** (2011-04-15) Do not do a full scan of an unordered index.
        **
        ** (2013-10-03) Do not count the entries in a partial index.
        **
        ** In practice the KeyInfo structure will not be used. It is only
        ** passed to keep OP_OpenRead happy.
        */
        if( !HasRowid(pTab) ) pBest = sqlite3PrimaryKeyIndex(pTab);
        for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
          if( pIdx->bUnordered==0
           && pIdx->szIdxRow<pTab->szTabRow
           && pIdx->pPartIdxWhere==0
           && (!pBest || pIdx->szIdxRow<pBest->szIdxRow)
          ){
            pBest = pIdx;
          }
        }
        if( pBest ){
          iRoot = pBest->tnum;
          pKeyInfo = sqlite3KeyInfoOfIndex(pParse, pBest);
        }

        /* Open a read-only cursor, execute the OP_Count, close the cursor. */
        sqlite3VdbeAddOp4Int(v, OP_OpenRead, iCsr, iRoot, iDb, 1);
        if( pKeyInfo ){
          sqlite3VdbeChangeP4(v, -1, (char *)pKeyInfo, P4_KEYINFO);
        }
        sqlite3VdbeAddOp2(v, OP_Count, iCsr, sAggInfo.aFunc[0].iMem);
        sqlite3VdbeAddOp1(v, OP_Close, iCsr);
        explainSimpleCount(pParse, pTab, pBest);
      }else
#endif /* SQLITE_OMIT_BTREECOUNT */
      {
        /* Check if the query is of one of the following forms:
        **
        **   SELECT min(x) FROM ...
        **   SELECT max(x) FROM ...
        **
        ** If it is, then ask the code in where.c to attempt to sort results
        ** as if there was an "ORDER ON x" or "ORDER ON x DESC" clause.
        ** If where.c is able to produce results sorted in this order, then
        ** add vdbe code to break out of the processing loop after the
        ** first iteration (since the first iteration of the loop is
        ** guaranteed to operate on the row with the minimum or maximum
        ** value of x, the only row required).
        **
        ** A special flag must be passed to sqlite3WhereBegin() to slightly
        ** modify behavior as follows:
        **
        **   + If the query is a "SELECT min(x)", then the loop coded by
        **     where.c should not iterate over any values with a NULL value
        **     for x.
        **
        **   + The optimizer code in where.c (the thing that decides which
        **     index or indices to use) should place a different priority on
        **     satisfying the 'ORDER BY' clause than it does in other cases.
        **     Refer to code and comments in where.c for details.
        */
        ExprList *pMinMax = 0;
        u8 flag = WHERE_ORDERBY_NORMAL;

        assert( p->pGroupBy==0 );
        assert( flag==0 );
        if( p->pHaving==0 ){
          flag = minMaxQuery(&sAggInfo, &pMinMax);
        }
        assert( flag==0 || (pMinMax!=0 && pMinMax->nExpr==1) );

        if( flag ){
          pMinMax = sqlite3ExprListDup(db, pMinMax, 0);
          pDel = pMinMax;
          assert( db->mallocFailed || pMinMax!=0 );
          if( !db->mallocFailed ){
            pMinMax->a[0].sortOrder = flag!=WHERE_ORDERBY_MIN ?1:0;
            pMinMax->a[0].pExpr->op = TK_COLUMN;
          }
        }

        /* This case runs if the aggregate has no GROUP BY clause.  The
        ** processing is much simpler since there is only a single row
        ** of output.
        */
        resetAccumulator(pParse, &sAggInfo);
        pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pMinMax,0,flag,0);
        if( pWInfo==0 ){
          sqlite3ExprListDelete(db, pDel);
          goto select_end;
        }
        updateAccumulator(pParse, &sAggInfo);
        assert( pMinMax==0 || pMinMax->nExpr==1 );
        if( sqlite3WhereIsOrdered(pWInfo)>0 ){
          sqlite3VdbeGoto(v, sqlite3WhereBreakLabel(pWInfo));
          VdbeComment((v, "%s() by index",
                (flag==WHERE_ORDERBY_MIN?"min":"max")));
        }
        sqlite3WhereEnd(pWInfo);
        finalizeAggFunctions(pParse, &sAggInfo);
      }

      sSort.pOrderBy = 0;
      sqlite3ExprIfFalse(pParse, pHaving, addrEnd, SQLITE_JUMPIFNULL);
      selectInnerLoop(pParse, p, p->pEList, -1, 0, 0,
                      pDest, addrEnd, addrEnd);
      sqlite3ExprListDelete(db, pDel);
    }
    sqlite3VdbeResolveLabel(v, addrEnd);

  } /* endif aggregate query */

  if( sDistinct.eTnctType==WHERE_DISTINCT_UNORDERED ){
    explainTempTable(pParse, "DISTINCT");
  }

  /* If there is an ORDER BY clause, then we need to sort the results
  ** and send them to the callback one by one.
  */
  if( sSort.pOrderBy ){
    explainTempTable(pParse,
                     sSort.nOBSat>0 ? "RIGHT PART OF ORDER BY":"ORDER BY");
    generateSortTail(pParse, p, &sSort, pEList->nExpr, pDest);
  }

  /* Jump here to skip this query
  */
  sqlite3VdbeResolveLabel(v, iEnd);

  /* The SELECT has been coded. If there is an error in the Parse structure,
  ** set the return code to 1. Otherwise 0. */
  rc = (pParse->nErr>0);

  /* Control jumps to here if an error is encountered above, or upon
  ** successful coding of the SELECT.
  */
select_end:
  explainSetInteger(pParse->iSelectId, iRestoreSelectId);

  /* Identify column names if results of the SELECT are to be output.
  */
  if( rc==SQLITE_OK && pDest->eDest==SRT_Output ){
    generateColumnNames(pParse, pTabList, pEList);
  }

  sqlite3DbFree(db, sAggInfo.aCol);
  sqlite3DbFree(db, sAggInfo.aFunc);
#if SELECTTRACE_ENABLED
  SELECTTRACE(1,pParse,p,("end processing\n"));
  pParse->nSelectIndent--;
#endif
  return rc;
}