175897234Sdrh<html> 275897234Sdrh<head> 375897234Sdrh<title>The Lemon Parser Generator</title> 475897234Sdrh</head> 575897234Sdrh<body bgcolor=white> 675897234Sdrh<h1 align=center>The Lemon Parser Generator</h1> 775897234Sdrh 875897234Sdrh<p>Lemon is an LALR(1) parser generator for C or C++. 975897234SdrhIt does the same job as ``bison'' and ``yacc''. 1075897234SdrhBut lemon is not another bison or yacc clone. It 1175897234Sdrhuses a different grammar syntax which is designed to 1275897234Sdrhreduce the number of coding errors. Lemon also uses a more 1375897234Sdrhsophisticated parsing engine that is faster than yacc and 1475897234Sdrhbison and which is both reentrant and thread-safe. 1575897234SdrhFurthermore, Lemon implements features that can be used 1675897234Sdrhto eliminate resource leaks, making is suitable for use 1775897234Sdrhin long-running programs such as graphical user interfaces 1875897234Sdrhor embedded controllers.</p> 1975897234Sdrh 2075897234Sdrh<p>This document is an introduction to the Lemon 2175897234Sdrhparser generator.</p> 2275897234Sdrh 2375897234Sdrh<h2>Theory of Operation</h2> 2475897234Sdrh 2575897234Sdrh<p>The main goal of Lemon is to translate a context free grammar (CFG) 2675897234Sdrhfor a particular language into C code that implements a parser for 2775897234Sdrhthat language. 2875897234SdrhThe program has two inputs: 2975897234Sdrh<ul> 3075897234Sdrh<li>The grammar specification. 3175897234Sdrh<li>A parser template file. 3275897234Sdrh</ul> 3375897234SdrhTypically, only the grammar specification is supplied by the programmer. 3475897234SdrhLemon comes with a default parser template which works fine for most 3575897234Sdrhapplications. But the user is free to substitute a different parser 3675897234Sdrhtemplate if desired.</p> 3775897234Sdrh 3875897234Sdrh<p>Depending on command-line options, Lemon will generate between 3975897234Sdrhone and three files of outputs. 4075897234Sdrh<ul> 4175897234Sdrh<li>C code to implement the parser. 4275897234Sdrh<li>A header file defining an integer ID for each terminal symbol. 4375897234Sdrh<li>An information file that describes the states of the generated parser 4475897234Sdrh automaton. 4575897234Sdrh</ul> 4675897234SdrhBy default, all three of these output files are generated. 4775897234SdrhThe header file is suppressed if the ``-m'' command-line option is 4875897234Sdrhused and the report file is omitted when ``-q'' is selected.</p> 4975897234Sdrh 5075897234Sdrh<p>The grammar specification file uses a ``.y'' suffix, by convention. 5175897234SdrhIn the examples used in this document, we'll assume the name of the 5275897234Sdrhgrammar file is ``gram.y''. A typical use of Lemon would be the 5375897234Sdrhfollowing command: 5475897234Sdrh<pre> 5575897234Sdrh lemon gram.y 5675897234Sdrh</pre> 5775897234SdrhThis command will generate three output files named ``gram.c'', 5875897234Sdrh``gram.h'' and ``gram.out''. 5975897234SdrhThe first is C code to implement the parser. The second 6075897234Sdrhis the header file that defines numerical values for all 6175897234Sdrhterminal symbols, and the last is the report that explains 6275897234Sdrhthe states used by the parser automaton.</p> 6375897234Sdrh 6475897234Sdrh<h3>Command Line Options</h3> 6575897234Sdrh 6675897234Sdrh<p>The behavior of Lemon can be modified using command-line options. 6775897234SdrhYou can obtain a list of the available command-line options together 6875897234Sdrhwith a brief explanation of what each does by typing 6975897234Sdrh<pre> 7075897234Sdrh lemon -? 7175897234Sdrh</pre> 7275897234SdrhAs of this writing, the following command-line options are supported: 7375897234Sdrh<ul> 7475897234Sdrh<li><tt>-b</tt> 7575897234Sdrh<li><tt>-c</tt> 7675897234Sdrh<li><tt>-g</tt> 7775897234Sdrh<li><tt>-m</tt> 7875897234Sdrh<li><tt>-q</tt> 7975897234Sdrh<li><tt>-s</tt> 8075897234Sdrh<li><tt>-x</tt> 8175897234Sdrh</ul> 8275897234SdrhThe ``-b'' option reduces the amount of text in the report file by 8375897234Sdrhprinting only the basis of each parser state, rather than the full 8475897234Sdrhconfiguration. 8575897234SdrhThe ``-c'' option suppresses action table compression. Using -c 8675897234Sdrhwill make the parser a little larger and slower but it will detect 8775897234Sdrhsyntax errors sooner. 8875897234SdrhThe ``-g'' option causes no output files to be generated at all. 8975897234SdrhInstead, the input grammar file is printed on standard output but 9075897234Sdrhwith all comments, actions and other extraneous text deleted. This 9175897234Sdrhis a useful way to get a quick summary of a grammar. 9275897234SdrhThe ``-m'' option causes the output C source file to be compatible 9375897234Sdrhwith the ``makeheaders'' program. 9475897234SdrhMakeheaders is a program that automatically generates header files 9575897234Sdrhfrom C source code. When the ``-m'' option is used, the header 9675897234Sdrhfile is not output since the makeheaders program will take care 9775897234Sdrhof generated all header files automatically. 9875897234SdrhThe ``-q'' option suppresses the report file. 9975897234SdrhUsing ``-s'' causes a brief summary of parser statistics to be 10075897234Sdrhprinted. Like this: 10175897234Sdrh<pre> 10275897234Sdrh Parser statistics: 74 terminals, 70 nonterminals, 179 rules 10375897234Sdrh 340 states, 2026 parser table entries, 0 conflicts 10475897234Sdrh</pre> 10575897234SdrhFinally, the ``-x'' option causes Lemon to print its version number 106b19a2bc6Sdrhand then stops without attempting to read the grammar or generate a parser.</p> 10775897234Sdrh 10875897234Sdrh<h3>The Parser Interface</h3> 10975897234Sdrh 11075897234Sdrh<p>Lemon doesn't generate a complete, working program. It only generates 11175897234Sdrha few subroutines that implement a parser. This section describes 11275897234Sdrhthe interface to those subroutines. It is up to the programmer to 11375897234Sdrhcall these subroutines in an appropriate way in order to produce a 11475897234Sdrhcomplete system.</p> 11575897234Sdrh 11675897234Sdrh<p>Before a program begins using a Lemon-generated parser, the program 11775897234Sdrhmust first create the parser. 11875897234SdrhA new parser is created as follows: 11975897234Sdrh<pre> 12075897234Sdrh void *pParser = ParseAlloc( malloc ); 12175897234Sdrh</pre> 12275897234SdrhThe ParseAlloc() routine allocates and initializes a new parser and 12375897234Sdrhreturns a pointer to it. 12475897234SdrhThe actual data structure used to represent a parser is opaque -- 12575897234Sdrhits internal structure is not visible or usable by the calling routine. 12675897234SdrhFor this reason, the ParseAlloc() routine returns a pointer to void 12775897234Sdrhrather than a pointer to some particular structure. 12875897234SdrhThe sole argument to the ParseAlloc() routine is a pointer to the 12975897234Sdrhsubroutine used to allocate memory. Typically this means ``malloc()''.</p> 13075897234Sdrh 13175897234Sdrh<p>After a program is finished using a parser, it can reclaim all 13275897234Sdrhmemory allocated by that parser by calling 13375897234Sdrh<pre> 13475897234Sdrh ParseFree(pParser, free); 13575897234Sdrh</pre> 13675897234SdrhThe first argument is the same pointer returned by ParseAlloc(). The 13775897234Sdrhsecond argument is a pointer to the function used to release bulk 13875897234Sdrhmemory back to the system.</p> 13975897234Sdrh 14075897234Sdrh<p>After a parser has been allocated using ParseAlloc(), the programmer 14175897234Sdrhmust supply the parser with a sequence of tokens (terminal symbols) to 14275897234Sdrhbe parsed. This is accomplished by calling the following function 14375897234Sdrhonce for each token: 14475897234Sdrh<pre> 14575897234Sdrh Parse(pParser, hTokenID, sTokenData, pArg); 14675897234Sdrh</pre> 14775897234SdrhThe first argument to the Parse() routine is the pointer returned by 14875897234SdrhParseAlloc(). 14975897234SdrhThe second argument is a small positive integer that tells the parse the 15075897234Sdrhtype of the next token in the data stream. 15175897234SdrhThere is one token type for each terminal symbol in the grammar. 15275897234SdrhThe gram.h file generated by Lemon contains #define statements that 15375897234Sdrhmap symbolic terminal symbol names into appropriate integer values. 15475897234Sdrh(A value of 0 for the second argument is a special flag to the 15575897234Sdrhparser to indicate that the end of input has been reached.) 15675897234SdrhThe third argument is the value of the given token. By default, 15775897234Sdrhthe type of the third argument is integer, but the grammar will 15875897234Sdrhusually redefine this type to be some kind of structure. 15975897234SdrhTypically the second argument will be a broad category of tokens 16075897234Sdrhsuch as ``identifier'' or ``number'' and the third argument will 16175897234Sdrhbe the name of the identifier or the value of the number.</p> 16275897234Sdrh 16375897234Sdrh<p>The Parse() function may have either three or four arguments, 164*45f31be8Sdrhdepending on the grammar. If the grammar specification file requests 165*45f31be8Sdrhit (via the <a href='#extraarg'><tt>extra_argument</tt> directive</a>), 166*45f31be8Sdrhthe Parse() function will have a fourth parameter that can be 16775897234Sdrhof any type chosen by the programmer. The parser doesn't do anything 16875897234Sdrhwith this argument except to pass it through to action routines. 16975897234SdrhThis is a convenient mechanism for passing state information down 17075897234Sdrhto the action routines without having to use global variables.</p> 17175897234Sdrh 17275897234Sdrh<p>A typical use of a Lemon parser might look something like the 17375897234Sdrhfollowing: 17475897234Sdrh<pre> 17575897234Sdrh 01 ParseTree *ParseFile(const char *zFilename){ 17675897234Sdrh 02 Tokenizer *pTokenizer; 17775897234Sdrh 03 void *pParser; 17875897234Sdrh 04 Token sToken; 17975897234Sdrh 05 int hTokenId; 18075897234Sdrh 06 ParserState sState; 18175897234Sdrh 07 18275897234Sdrh 08 pTokenizer = TokenizerCreate(zFilename); 18375897234Sdrh 09 pParser = ParseAlloc( malloc ); 18475897234Sdrh 10 InitParserState(&sState); 18575897234Sdrh 11 while( GetNextToken(pTokenizer, &hTokenId, &sToken) ){ 18675897234Sdrh 12 Parse(pParser, hTokenId, sToken, &sState); 18775897234Sdrh 13 } 18875897234Sdrh 14 Parse(pParser, 0, sToken, &sState); 18975897234Sdrh 15 ParseFree(pParser, free ); 19075897234Sdrh 16 TokenizerFree(pTokenizer); 19175897234Sdrh 17 return sState.treeRoot; 19275897234Sdrh 18 } 19375897234Sdrh</pre> 19475897234SdrhThis example shows a user-written routine that parses a file of 19575897234Sdrhtext and returns a pointer to the parse tree. 19675897234Sdrh(We've omitted all error-handling from this example to keep it 19775897234Sdrhsimple.) 19875897234SdrhWe assume the existence of some kind of tokenizer which is created 19975897234Sdrhusing TokenizerCreate() on line 8 and deleted by TokenizerFree() 20075897234Sdrhon line 16. The GetNextToken() function on line 11 retrieves the 20175897234Sdrhnext token from the input file and puts its type in the 20275897234Sdrhinteger variable hTokenId. The sToken variable is assumed to be 20375897234Sdrhsome kind of structure that contains details about each token, 20475897234Sdrhsuch as its complete text, what line it occurs on, etc. </p> 20575897234Sdrh 20675897234Sdrh<p>This example also assumes the existence of structure of type 20775897234SdrhParserState that holds state information about a particular parse. 20875897234SdrhAn instance of such a structure is created on line 6 and initialized 20975897234Sdrhon line 10. A pointer to this structure is passed into the Parse() 21075897234Sdrhroutine as the optional 4th argument. 21175897234SdrhThe action routine specified by the grammar for the parser can use 21275897234Sdrhthe ParserState structure to hold whatever information is useful and 21375897234Sdrhappropriate. In the example, we note that the treeRoot field of 21475897234Sdrhthe ParserState structure is left pointing to the root of the parse 21575897234Sdrhtree.</p> 21675897234Sdrh 21775897234Sdrh<p>The core of this example as it relates to Lemon is as follows: 21875897234Sdrh<pre> 21975897234Sdrh ParseFile(){ 22075897234Sdrh pParser = ParseAlloc( malloc ); 22175897234Sdrh while( GetNextToken(pTokenizer,&hTokenId, &sToken) ){ 22275897234Sdrh Parse(pParser, hTokenId, sToken); 22375897234Sdrh } 22475897234Sdrh Parse(pParser, 0, sToken); 22575897234Sdrh ParseFree(pParser, free ); 22675897234Sdrh } 22775897234Sdrh</pre> 22875897234SdrhBasically, what a program has to do to use a Lemon-generated parser 22975897234Sdrhis first create the parser, then send it lots of tokens obtained by 23075897234Sdrhtokenizing an input source. When the end of input is reached, the 23175897234SdrhParse() routine should be called one last time with a token type 23275897234Sdrhof 0. This step is necessary to inform the parser that the end of 23375897234Sdrhinput has been reached. Finally, we reclaim memory used by the 23475897234Sdrhparser by calling ParseFree().</p> 23575897234Sdrh 23675897234Sdrh<p>There is one other interface routine that should be mentioned 23775897234Sdrhbefore we move on. 23875897234SdrhThe ParseTrace() function can be used to generate debugging output 23975897234Sdrhfrom the parser. A prototype for this routine is as follows: 24075897234Sdrh<pre> 24175897234Sdrh ParseTrace(FILE *stream, char *zPrefix); 24275897234Sdrh</pre> 24375897234SdrhAfter this routine is called, a short (one-line) message is written 24475897234Sdrhto the designated output stream every time the parser changes states 24575897234Sdrhor calls an action routine. Each such message is prefaced using 24675897234Sdrhthe text given by zPrefix. This debugging output can be turned off 24775897234Sdrhby calling ParseTrace() again with a first argument of NULL (0).</p> 24875897234Sdrh 24975897234Sdrh<h3>Differences With YACC and BISON</h3> 25075897234Sdrh 25175897234Sdrh<p>Programmers who have previously used the yacc or bison parser 25275897234Sdrhgenerator will notice several important differences between yacc and/or 25375897234Sdrhbison and Lemon. 25475897234Sdrh<ul> 25575897234Sdrh<li>In yacc and bison, the parser calls the tokenizer. In Lemon, 25675897234Sdrh the tokenizer calls the parser. 25775897234Sdrh<li>Lemon uses no global variables. Yacc and bison use global variables 25875897234Sdrh to pass information between the tokenizer and parser. 25975897234Sdrh<li>Lemon allows multiple parsers to be running simultaneously. Yacc 26075897234Sdrh and bison do not. 26175897234Sdrh</ul> 26275897234SdrhThese differences may cause some initial confusion for programmers 26375897234Sdrhwith prior yacc and bison experience. 26475897234SdrhBut after years of experience using Lemon, I firmly 26575897234Sdrhbelieve that the Lemon way of doing things is better.</p> 26675897234Sdrh 267*45f31be8Sdrh<p><i>Updated as of 2016-02-16:</i> 268*45f31be8SdrhThe text above was written in the 1990s. 269*45f31be8SdrhWe are told that Bison has lately been enhanced to support the 270*45f31be8Sdrhtokenizer-calls-parser paradigm used by Lemon, and to obviate the 271*45f31be8Sdrhneed for global variables.</p> 272*45f31be8Sdrh 27375897234Sdrh<h2>Input File Syntax</h2> 27475897234Sdrh 27575897234Sdrh<p>The main purpose of the grammar specification file for Lemon is 27675897234Sdrhto define the grammar for the parser. But the input file also 27775897234Sdrhspecifies additional information Lemon requires to do its job. 27875897234SdrhMost of the work in using Lemon is in writing an appropriate 27975897234Sdrhgrammar file.</p> 28075897234Sdrh 28175897234Sdrh<p>The grammar file for lemon is, for the most part, free format. 28275897234SdrhIt does not have sections or divisions like yacc or bison. Any 28375897234Sdrhdeclaration can occur at any point in the file. 28475897234SdrhLemon ignores whitespace (except where it is needed to separate 28575897234Sdrhtokens) and it honors the same commenting conventions as C and C++.</p> 28675897234Sdrh 28775897234Sdrh<h3>Terminals and Nonterminals</h3> 28875897234Sdrh 28975897234Sdrh<p>A terminal symbol (token) is any string of alphanumeric 29075897234Sdrhand underscore characters 29175897234Sdrhthat begins with an upper case letter. 292c8eee5e5SdrhA terminal can contain lowercase letters after the first character, 29375897234Sdrhbut the usual convention is to make terminals all upper case. 29475897234SdrhA nonterminal, on the other hand, is any string of alphanumeric 29575897234Sdrhand underscore characters than begins with a lower case letter. 29675897234SdrhAgain, the usual convention is to make nonterminals use all lower 29775897234Sdrhcase letters.</p> 29875897234Sdrh 29975897234Sdrh<p>In Lemon, terminal and nonterminal symbols do not need to 30075897234Sdrhbe declared or identified in a separate section of the grammar file. 30175897234SdrhLemon is able to generate a list of all terminals and nonterminals 30275897234Sdrhby examining the grammar rules, and it can always distinguish a 30375897234Sdrhterminal from a nonterminal by checking the case of the first 30475897234Sdrhcharacter of the name.</p> 30575897234Sdrh 30675897234Sdrh<p>Yacc and bison allow terminal symbols to have either alphanumeric 30775897234Sdrhnames or to be individual characters included in single quotes, like 30875897234Sdrhthis: ')' or '$'. Lemon does not allow this alternative form for 30975897234Sdrhterminal symbols. With Lemon, all symbols, terminals and nonterminals, 31075897234Sdrhmust have alphanumeric names.</p> 31175897234Sdrh 31275897234Sdrh<h3>Grammar Rules</h3> 31375897234Sdrh 31475897234Sdrh<p>The main component of a Lemon grammar file is a sequence of grammar 31575897234Sdrhrules. 31675897234SdrhEach grammar rule consists of a nonterminal symbol followed by 31775897234Sdrhthe special symbol ``::='' and then a list of terminals and/or nonterminals. 31875897234SdrhThe rule is terminated by a period. 31975897234SdrhThe list of terminals and nonterminals on the right-hand side of the 32075897234Sdrhrule can be empty. 32175897234SdrhRules can occur in any order, except that the left-hand side of the 32275897234Sdrhfirst rule is assumed to be the start symbol for the grammar (unless 32375897234Sdrhspecified otherwise using the <tt>%start</tt> directive described below.) 32475897234SdrhA typical sequence of grammar rules might look something like this: 32575897234Sdrh<pre> 32675897234Sdrh expr ::= expr PLUS expr. 32775897234Sdrh expr ::= expr TIMES expr. 32875897234Sdrh expr ::= LPAREN expr RPAREN. 32975897234Sdrh expr ::= VALUE. 33075897234Sdrh</pre> 33175897234Sdrh</p> 33275897234Sdrh 33375897234Sdrh<p>There is one non-terminal in this example, ``expr'', and five 33475897234Sdrhterminal symbols or tokens: ``PLUS'', ``TIMES'', ``LPAREN'', 33575897234Sdrh``RPAREN'' and ``VALUE''.</p> 33675897234Sdrh 33775897234Sdrh<p>Like yacc and bison, Lemon allows the grammar to specify a block 33875897234Sdrhof C code that will be executed whenever a grammar rule is reduced 33975897234Sdrhby the parser. 34075897234SdrhIn Lemon, this action is specified by putting the C code (contained 34175897234Sdrhwithin curly braces <tt>{...}</tt>) immediately after the 34275897234Sdrhperiod that closes the rule. 34375897234SdrhFor example: 34475897234Sdrh<pre> 34575897234Sdrh expr ::= expr PLUS expr. { printf("Doing an addition...\n"); } 34675897234Sdrh</pre> 34775897234Sdrh</p> 34875897234Sdrh 34975897234Sdrh<p>In order to be useful, grammar actions must normally be linked to 35075897234Sdrhtheir associated grammar rules. 35175897234SdrhIn yacc and bison, this is accomplished by embedding a ``$$'' in the 35275897234Sdrhaction to stand for the value of the left-hand side of the rule and 35375897234Sdrhsymbols ``$1'', ``$2'', and so forth to stand for the value of 35475897234Sdrhthe terminal or nonterminal at position 1, 2 and so forth on the 35575897234Sdrhright-hand side of the rule. 35675897234SdrhThis idea is very powerful, but it is also very error-prone. The 35775897234Sdrhsingle most common source of errors in a yacc or bison grammar is 35875897234Sdrhto miscount the number of symbols on the right-hand side of a grammar 35975897234Sdrhrule and say ``$7'' when you really mean ``$8''.</p> 36075897234Sdrh 36175897234Sdrh<p>Lemon avoids the need to count grammar symbols by assigning symbolic 36275897234Sdrhnames to each symbol in a grammar rule and then using those symbolic 36375897234Sdrhnames in the action. 36475897234SdrhIn yacc or bison, one would write this: 36575897234Sdrh<pre> 36675897234Sdrh expr -> expr PLUS expr { $$ = $1 + $3; }; 36775897234Sdrh</pre> 36875897234SdrhBut in Lemon, the same rule becomes the following: 36975897234Sdrh<pre> 37075897234Sdrh expr(A) ::= expr(B) PLUS expr(C). { A = B+C; } 37175897234Sdrh</pre> 37275897234SdrhIn the Lemon rule, any symbol in parentheses after a grammar rule 37375897234Sdrhsymbol becomes a place holder for that symbol in the grammar rule. 37475897234SdrhThis place holder can then be used in the associated C action to 37575897234Sdrhstand for the value of that symbol.<p> 37675897234Sdrh 37775897234Sdrh<p>The Lemon notation for linking a grammar rule with its reduce 37875897234Sdrhaction is superior to yacc/bison on several counts. 37975897234SdrhFirst, as mentioned above, the Lemon method avoids the need to 38075897234Sdrhcount grammar symbols. 38175897234SdrhSecondly, if a terminal or nonterminal in a Lemon grammar rule 38275897234Sdrhincludes a linking symbol in parentheses but that linking symbol 38375897234Sdrhis not actually used in the reduce action, then an error message 38475897234Sdrhis generated. 38575897234SdrhFor example, the rule 38675897234Sdrh<pre> 38775897234Sdrh expr(A) ::= expr(B) PLUS expr(C). { A = B; } 38875897234Sdrh</pre> 38975897234Sdrhwill generate an error because the linking symbol ``C'' is used 39075897234Sdrhin the grammar rule but not in the reduce action.</p> 39175897234Sdrh 39275897234Sdrh<p>The Lemon notation for linking grammar rules to reduce actions 39375897234Sdrhalso facilitates the use of destructors for reclaiming memory 39475897234Sdrhallocated by the values of terminals and nonterminals on the 39575897234Sdrhright-hand side of a rule.</p> 39675897234Sdrh 39775897234Sdrh<h3>Precedence Rules</h3> 39875897234Sdrh 39975897234Sdrh<p>Lemon resolves parsing ambiguities in exactly the same way as 40075897234Sdrhyacc and bison. A shift-reduce conflict is resolved in favor 40175897234Sdrhof the shift, and a reduce-reduce conflict is resolved by reducing 40275897234Sdrhwhichever rule comes first in the grammar file.</p> 40375897234Sdrh 40475897234Sdrh<p>Just like in 40575897234Sdrhyacc and bison, Lemon allows a measure of control 40675897234Sdrhover the resolution of paring conflicts using precedence rules. 40775897234SdrhA precedence value can be assigned to any terminal symbol 40875897234Sdrhusing the %left, %right or %nonassoc directives. Terminal symbols 40975897234Sdrhmentioned in earlier directives have a lower precedence that 41075897234Sdrhterminal symbols mentioned in later directives. For example:</p> 41175897234Sdrh 41275897234Sdrh<p><pre> 41375897234Sdrh %left AND. 41475897234Sdrh %left OR. 41575897234Sdrh %nonassoc EQ NE GT GE LT LE. 41675897234Sdrh %left PLUS MINUS. 41775897234Sdrh %left TIMES DIVIDE MOD. 41875897234Sdrh %right EXP NOT. 41975897234Sdrh</pre></p> 42075897234Sdrh 42175897234Sdrh<p>In the preceding sequence of directives, the AND operator is 42275897234Sdrhdefined to have the lowest precedence. The OR operator is one 42375897234Sdrhprecedence level higher. And so forth. Hence, the grammar would 42475897234Sdrhattempt to group the ambiguous expression 42575897234Sdrh<pre> 42675897234Sdrh a AND b OR c 42775897234Sdrh</pre> 42875897234Sdrhlike this 42975897234Sdrh<pre> 43075897234Sdrh a AND (b OR c). 43175897234Sdrh</pre> 43275897234SdrhThe associativity (left, right or nonassoc) is used to determine 43375897234Sdrhthe grouping when the precedence is the same. AND is left-associative 43475897234Sdrhin our example, so 43575897234Sdrh<pre> 43675897234Sdrh a AND b AND c 43775897234Sdrh</pre> 43875897234Sdrhis parsed like this 43975897234Sdrh<pre> 44075897234Sdrh (a AND b) AND c. 44175897234Sdrh</pre> 44275897234SdrhThe EXP operator is right-associative, though, so 44375897234Sdrh<pre> 44475897234Sdrh a EXP b EXP c 44575897234Sdrh</pre> 44675897234Sdrhis parsed like this 44775897234Sdrh<pre> 44875897234Sdrh a EXP (b EXP c). 44975897234Sdrh</pre> 45075897234SdrhThe nonassoc precedence is used for non-associative operators. 45175897234SdrhSo 45275897234Sdrh<pre> 45375897234Sdrh a EQ b EQ c 45475897234Sdrh</pre> 45575897234Sdrhis an error.</p> 45675897234Sdrh 45775897234Sdrh<p>The precedence of non-terminals is transferred to rules as follows: 45875897234SdrhThe precedence of a grammar rule is equal to the precedence of the 45975897234Sdrhleft-most terminal symbol in the rule for which a precedence is 46075897234Sdrhdefined. This is normally what you want, but in those cases where 46175897234Sdrhyou want to precedence of a grammar rule to be something different, 46275897234Sdrhyou can specify an alternative precedence symbol by putting the 46375897234Sdrhsymbol in square braces after the period at the end of the rule and 46475897234Sdrhbefore any C-code. For example:</p> 46575897234Sdrh 46675897234Sdrh<p><pre> 46775897234Sdrh expr = MINUS expr. [NOT] 46875897234Sdrh</pre></p> 46975897234Sdrh 47075897234Sdrh<p>This rule has a precedence equal to that of the NOT symbol, not the 47175897234SdrhMINUS symbol as would have been the case by default.</p> 47275897234Sdrh 47375897234Sdrh<p>With the knowledge of how precedence is assigned to terminal 47475897234Sdrhsymbols and individual 47575897234Sdrhgrammar rules, we can now explain precisely how parsing conflicts 47675897234Sdrhare resolved in Lemon. Shift-reduce conflicts are resolved 47775897234Sdrhas follows: 47875897234Sdrh<ul> 47975897234Sdrh<li> If either the token to be shifted or the rule to be reduced 48075897234Sdrh lacks precedence information, then resolve in favor of the 48175897234Sdrh shift, but report a parsing conflict. 48275897234Sdrh<li> If the precedence of the token to be shifted is greater than 48375897234Sdrh the precedence of the rule to reduce, then resolve in favor 48475897234Sdrh of the shift. No parsing conflict is reported. 48575897234Sdrh<li> If the precedence of the token it be shifted is less than the 48675897234Sdrh precedence of the rule to reduce, then resolve in favor of the 48775897234Sdrh reduce action. No parsing conflict is reported. 48875897234Sdrh<li> If the precedences are the same and the shift token is 48975897234Sdrh right-associative, then resolve in favor of the shift. 49075897234Sdrh No parsing conflict is reported. 491d5578433Smistachkin<li> If the precedences are the same the shift token is 49275897234Sdrh left-associative, then resolve in favor of the reduce. 49375897234Sdrh No parsing conflict is reported. 49475897234Sdrh<li> Otherwise, resolve the conflict by doing the shift and 49575897234Sdrh report the parsing conflict. 49675897234Sdrh</ul> 49775897234SdrhReduce-reduce conflicts are resolved this way: 49875897234Sdrh<ul> 49975897234Sdrh<li> If either reduce rule 50075897234Sdrh lacks precedence information, then resolve in favor of the 50175897234Sdrh rule that appears first in the grammar and report a parsing 50275897234Sdrh conflict. 50375897234Sdrh<li> If both rules have precedence and the precedence is different 50475897234Sdrh then resolve the dispute in favor of the rule with the highest 50575897234Sdrh precedence and do not report a conflict. 50675897234Sdrh<li> Otherwise, resolve the conflict by reducing by the rule that 50775897234Sdrh appears first in the grammar and report a parsing conflict. 50875897234Sdrh</ul> 50975897234Sdrh 51075897234Sdrh<h3>Special Directives</h3> 51175897234Sdrh 51275897234Sdrh<p>The input grammar to Lemon consists of grammar rules and special 51375897234Sdrhdirectives. We've described all the grammar rules, so now we'll 51475897234Sdrhtalk about the special directives.</p> 51575897234Sdrh 51675897234Sdrh<p>Directives in lemon can occur in any order. You can put them before 51775897234Sdrhthe grammar rules, or after the grammar rules, or in the mist of the 51875897234Sdrhgrammar rules. It doesn't matter. The relative order of 51975897234Sdrhdirectives used to assign precedence to terminals is important, but 52075897234Sdrhother than that, the order of directives in Lemon is arbitrary.</p> 52175897234Sdrh 52275897234Sdrh<p>Lemon supports the following special directives: 52375897234Sdrh<ul> 524f2340fc7Sdrh<li><tt>%code</tt> 525f2340fc7Sdrh<li><tt>%default_destructor</tt> 526f2340fc7Sdrh<li><tt>%default_type</tt> 52775897234Sdrh<li><tt>%destructor</tt> 52875897234Sdrh<li><tt>%extra_argument</tt> 52975897234Sdrh<li><tt>%include</tt> 53075897234Sdrh<li><tt>%left</tt> 53175897234Sdrh<li><tt>%name</tt> 53275897234Sdrh<li><tt>%nonassoc</tt> 53375897234Sdrh<li><tt>%parse_accept</tt> 53475897234Sdrh<li><tt>%parse_failure </tt> 53575897234Sdrh<li><tt>%right</tt> 53675897234Sdrh<li><tt>%stack_overflow</tt> 53775897234Sdrh<li><tt>%stack_size</tt> 53875897234Sdrh<li><tt>%start_symbol</tt> 53975897234Sdrh<li><tt>%syntax_error</tt> 54075897234Sdrh<li><tt>%token_destructor</tt> 54175897234Sdrh<li><tt>%token_prefix</tt> 54275897234Sdrh<li><tt>%token_type</tt> 54375897234Sdrh<li><tt>%type</tt> 54475897234Sdrh</ul> 54575897234SdrhEach of these directives will be described separately in the 54675897234Sdrhfollowing sections:</p> 54775897234Sdrh 548f2340fc7Sdrh<h4>The <tt>%code</tt> directive</h4> 549f2340fc7Sdrh 550f2340fc7Sdrh<p>The %code directive is used to specify addition C/C++ code that 551f2340fc7Sdrhis added to the end of the main output file. This is similar to 552f2340fc7Sdrhthe %include directive except that %include is inserted at the 553f2340fc7Sdrhbeginning of the main output file.</p> 554f2340fc7Sdrh 555f2340fc7Sdrh<p>%code is typically used to include some action routines or perhaps 556f2340fc7Sdrha tokenizer as part of the output file.</p> 557f2340fc7Sdrh 558f2340fc7Sdrh<h4>The <tt>%default_destructor</tt> directive</h4> 559f2340fc7Sdrh 560f2340fc7Sdrh<p>The %default_destructor directive specifies a destructor to 561f2340fc7Sdrhuse for non-terminals that do not have their own destructor 562f2340fc7Sdrhspecified by a separate %destructor directive. See the documentation 563f2340fc7Sdrhon the %destructor directive below for additional information.</p> 564f2340fc7Sdrh 565f2340fc7Sdrh<p>In some grammers, many different non-terminal symbols have the 566f2340fc7Sdrhsame datatype and hence the same destructor. This directive is 567f2340fc7Sdrha convenience way to specify the same destructor for all those 568f2340fc7Sdrhnon-terminals using a single statement.</p> 569f2340fc7Sdrh 570f2340fc7Sdrh<h4>The <tt>%default_type</tt> directive</h4> 571f2340fc7Sdrh 572f2340fc7Sdrh<p>The %default_type directive specifies the datatype of non-terminal 573f2340fc7Sdrhsymbols that do no have their own datatype defined using a separate 574f2340fc7Sdrh%type directive. See the documentation on %type below for addition 575f2340fc7Sdrhinformation.</p> 576f2340fc7Sdrh 57775897234Sdrh<h4>The <tt>%destructor</tt> directive</h4> 57875897234Sdrh 57975897234Sdrh<p>The %destructor directive is used to specify a destructor for 58075897234Sdrha non-terminal symbol. 58175897234Sdrh(See also the %token_destructor directive which is used to 58275897234Sdrhspecify a destructor for terminal symbols.)</p> 58375897234Sdrh 58475897234Sdrh<p>A non-terminal's destructor is called to dispose of the 58575897234Sdrhnon-terminal's value whenever the non-terminal is popped from 58675897234Sdrhthe stack. This includes all of the following circumstances: 58775897234Sdrh<ul> 58875897234Sdrh<li> When a rule reduces and the value of a non-terminal on 58975897234Sdrh the right-hand side is not linked to C code. 59075897234Sdrh<li> When the stack is popped during error processing. 59175897234Sdrh<li> When the ParseFree() function runs. 59275897234Sdrh</ul> 59375897234SdrhThe destructor can do whatever it wants with the value of 59475897234Sdrhthe non-terminal, but its design is to deallocate memory 59575897234Sdrhor other resources held by that non-terminal.</p> 59675897234Sdrh 59775897234Sdrh<p>Consider an example: 59875897234Sdrh<pre> 59975897234Sdrh %type nt {void*} 60075897234Sdrh %destructor nt { free($$); } 60175897234Sdrh nt(A) ::= ID NUM. { A = malloc( 100 ); } 60275897234Sdrh</pre> 60375897234SdrhThis example is a bit contrived but it serves to illustrate how 60475897234Sdrhdestructors work. The example shows a non-terminal named 60575897234Sdrh``nt'' that holds values of type ``void*''. When the rule for 60675897234Sdrhan ``nt'' reduces, it sets the value of the non-terminal to 60775897234Sdrhspace obtained from malloc(). Later, when the nt non-terminal 60875897234Sdrhis popped from the stack, the destructor will fire and call 60975897234Sdrhfree() on this malloced space, thus avoiding a memory leak. 61075897234Sdrh(Note that the symbol ``$$'' in the destructor code is replaced 61175897234Sdrhby the value of the non-terminal.)</p> 61275897234Sdrh 61375897234Sdrh<p>It is important to note that the value of a non-terminal is passed 61475897234Sdrhto the destructor whenever the non-terminal is removed from the 61575897234Sdrhstack, unless the non-terminal is used in a C-code action. If 61675897234Sdrhthe non-terminal is used by C-code, then it is assumed that the 61775897234SdrhC-code will take care of destroying it if it should really 61875897234Sdrhbe destroyed. More commonly, the value is used to build some 61975897234Sdrhlarger structure and we don't want to destroy it, which is why 62075897234Sdrhthe destructor is not called in this circumstance.</p> 62175897234Sdrh 62275897234Sdrh<p>By appropriate use of destructors, it is possible to 62375897234Sdrhbuild a parser using Lemon that can be used within a long-running 62475897234Sdrhprogram, such as a GUI, that will not leak memory or other resources. 62575897234SdrhTo do the same using yacc or bison is much more difficult.</p> 62675897234Sdrh 627*45f31be8Sdrh<a name="extraarg"></a> 62875897234Sdrh<h4>The <tt>%extra_argument</tt> directive</h4> 62975897234Sdrh 63075897234SdrhThe %extra_argument directive instructs Lemon to add a 4th parameter 63175897234Sdrhto the parameter list of the Parse() function it generates. Lemon 63275897234Sdrhdoesn't do anything itself with this extra argument, but it does 63375897234Sdrhmake the argument available to C-code action routines, destructors, 63475897234Sdrhand so forth. For example, if the grammar file contains:</p> 63575897234Sdrh 63675897234Sdrh<p><pre> 63775897234Sdrh %extra_argument { MyStruct *pAbc } 63875897234Sdrh</pre></p> 63975897234Sdrh 64075897234Sdrh<p>Then the Parse() function generated will have an 4th parameter 64175897234Sdrhof type ``MyStruct*'' and all action routines will have access to 64275897234Sdrha variable named ``pAbc'' that is the value of the 4th parameter 64375897234Sdrhin the most recent call to Parse().</p> 64475897234Sdrh 64575897234Sdrh<h4>The <tt>%include</tt> directive</h4> 64675897234Sdrh 64775897234Sdrh<p>The %include directive specifies C code that is included at the 64875897234Sdrhtop of the generated parser. You can include any text you want -- 649f2340fc7Sdrhthe Lemon parser generator copies it blindly. If you have multiple 650f2340fc7Sdrh%include directives in your grammar file the value of the last 651f2340fc7Sdrh%include directive overwrites all the others.</p. 65275897234Sdrh 65375897234Sdrh<p>The %include directive is very handy for getting some extra #include 65475897234Sdrhpreprocessor statements at the beginning of the generated parser. 65575897234SdrhFor example:</p> 65675897234Sdrh 65775897234Sdrh<p><pre> 65875897234Sdrh %include {#include <unistd.h>} 65975897234Sdrh</pre></p> 66075897234Sdrh 66175897234Sdrh<p>This might be needed, for example, if some of the C actions in the 66275897234Sdrhgrammar call functions that are prototyed in unistd.h.</p> 66375897234Sdrh 66475897234Sdrh<h4>The <tt>%left</tt> directive</h4> 66575897234Sdrh 66675897234SdrhThe %left directive is used (along with the %right and 66775897234Sdrh%nonassoc directives) to declare precedences of terminal 66875897234Sdrhsymbols. Every terminal symbol whose name appears after 66975897234Sdrha %left directive but before the next period (``.'') is 67075897234Sdrhgiven the same left-associative precedence value. Subsequent 67175897234Sdrh%left directives have higher precedence. For example:</p> 67275897234Sdrh 67375897234Sdrh<p><pre> 67475897234Sdrh %left AND. 67575897234Sdrh %left OR. 67675897234Sdrh %nonassoc EQ NE GT GE LT LE. 67775897234Sdrh %left PLUS MINUS. 67875897234Sdrh %left TIMES DIVIDE MOD. 67975897234Sdrh %right EXP NOT. 68075897234Sdrh</pre></p> 68175897234Sdrh 68275897234Sdrh<p>Note the period that terminates each %left, %right or %nonassoc 68375897234Sdrhdirective.</p> 68475897234Sdrh 68575897234Sdrh<p>LALR(1) grammars can get into a situation where they require 68675897234Sdrha large amount of stack space if you make heavy use or right-associative 68775897234Sdrhoperators. For this reason, it is recommended that you use %left 68875897234Sdrhrather than %right whenever possible.</p> 68975897234Sdrh 69075897234Sdrh<h4>The <tt>%name</tt> directive</h4> 69175897234Sdrh 69275897234Sdrh<p>By default, the functions generated by Lemon all begin with the 69375897234Sdrhfive-character string ``Parse''. You can change this string to something 69475897234Sdrhdifferent using the %name directive. For instance:</p> 69575897234Sdrh 69675897234Sdrh<p><pre> 69775897234Sdrh %name Abcde 69875897234Sdrh</pre></p> 69975897234Sdrh 70075897234Sdrh<p>Putting this directive in the grammar file will cause Lemon to generate 70175897234Sdrhfunctions named 70275897234Sdrh<ul> 70375897234Sdrh<li> AbcdeAlloc(), 70475897234Sdrh<li> AbcdeFree(), 70575897234Sdrh<li> AbcdeTrace(), and 70675897234Sdrh<li> Abcde(). 70775897234Sdrh</ul> 70875897234SdrhThe %name directive allows you to generator two or more different 70975897234Sdrhparsers and link them all into the same executable. 71075897234Sdrh</p> 71175897234Sdrh 71275897234Sdrh<h4>The <tt>%nonassoc</tt> directive</h4> 71375897234Sdrh 71475897234Sdrh<p>This directive is used to assign non-associative precedence to 71575897234Sdrhone or more terminal symbols. See the section on precedence rules 71675897234Sdrhor on the %left directive for additional information.</p> 71775897234Sdrh 71875897234Sdrh<h4>The <tt>%parse_accept</tt> directive</h4> 71975897234Sdrh 72075897234Sdrh<p>The %parse_accept directive specifies a block of C code that is 72175897234Sdrhexecuted whenever the parser accepts its input string. To ``accept'' 72275897234Sdrhan input string means that the parser was able to process all tokens 72375897234Sdrhwithout error.</p> 72475897234Sdrh 72575897234Sdrh<p>For example:</p> 72675897234Sdrh 72775897234Sdrh<p><pre> 72875897234Sdrh %parse_accept { 72975897234Sdrh printf("parsing complete!\n"); 73075897234Sdrh } 73175897234Sdrh</pre></p> 73275897234Sdrh 73375897234Sdrh 73475897234Sdrh<h4>The <tt>%parse_failure</tt> directive</h4> 73575897234Sdrh 73675897234Sdrh<p>The %parse_failure directive specifies a block of C code that 73775897234Sdrhis executed whenever the parser fails complete. This code is not 73875897234Sdrhexecuted until the parser has tried and failed to resolve an input 73975897234Sdrherror using is usual error recovery strategy. The routine is 74075897234Sdrhonly invoked when parsing is unable to continue.</p> 74175897234Sdrh 74275897234Sdrh<p><pre> 74375897234Sdrh %parse_failure { 74475897234Sdrh fprintf(stderr,"Giving up. Parser is hopelessly lost...\n"); 74575897234Sdrh } 74675897234Sdrh</pre></p> 74775897234Sdrh 74875897234Sdrh<h4>The <tt>%right</tt> directive</h4> 74975897234Sdrh 75075897234Sdrh<p>This directive is used to assign right-associative precedence to 75175897234Sdrhone or more terminal symbols. See the section on precedence rules 75275897234Sdrhor on the %left directive for additional information.</p> 75375897234Sdrh 75475897234Sdrh<h4>The <tt>%stack_overflow</tt> directive</h4> 75575897234Sdrh 75675897234Sdrh<p>The %stack_overflow directive specifies a block of C code that 75775897234Sdrhis executed if the parser's internal stack ever overflows. Typically 75875897234Sdrhthis just prints an error message. After a stack overflow, the parser 75975897234Sdrhwill be unable to continue and must be reset.</p> 76075897234Sdrh 76175897234Sdrh<p><pre> 76275897234Sdrh %stack_overflow { 76375897234Sdrh fprintf(stderr,"Giving up. Parser stack overflow\n"); 76475897234Sdrh } 76575897234Sdrh</pre></p> 76675897234Sdrh 76775897234Sdrh<p>You can help prevent parser stack overflows by avoiding the use 76875897234Sdrhof right recursion and right-precedence operators in your grammar. 76975897234SdrhUse left recursion and and left-precedence operators instead, to 77075897234Sdrhencourage rules to reduce sooner and keep the stack size down. 77175897234SdrhFor example, do rules like this: 77275897234Sdrh<pre> 77375897234Sdrh list ::= list element. // left-recursion. Good! 77475897234Sdrh list ::= . 77575897234Sdrh</pre> 77675897234SdrhNot like this: 77775897234Sdrh<pre> 77875897234Sdrh list ::= element list. // right-recursion. Bad! 77975897234Sdrh list ::= . 78075897234Sdrh</pre> 78175897234Sdrh 78275897234Sdrh<h4>The <tt>%stack_size</tt> directive</h4> 78375897234Sdrh 78475897234Sdrh<p>If stack overflow is a problem and you can't resolve the trouble 78575897234Sdrhby using left-recursion, then you might want to increase the size 78675897234Sdrhof the parser's stack using this directive. Put an positive integer 78775897234Sdrhafter the %stack_size directive and Lemon will generate a parse 78875897234Sdrhwith a stack of the requested size. The default value is 100.</p> 78975897234Sdrh 79075897234Sdrh<p><pre> 79175897234Sdrh %stack_size 2000 79275897234Sdrh</pre></p> 79375897234Sdrh 79475897234Sdrh<h4>The <tt>%start_symbol</tt> directive</h4> 79575897234Sdrh 79675897234Sdrh<p>By default, the start-symbol for the grammar that Lemon generates 79775897234Sdrhis the first non-terminal that appears in the grammar file. But you 79875897234Sdrhcan choose a different start-symbol using the %start_symbol directive.</p> 79975897234Sdrh 80075897234Sdrh<p><pre> 80175897234Sdrh %start_symbol prog 80275897234Sdrh</pre></p> 80375897234Sdrh 80475897234Sdrh<h4>The <tt>%token_destructor</tt> directive</h4> 80575897234Sdrh 80675897234Sdrh<p>The %destructor directive assigns a destructor to a non-terminal 80775897234Sdrhsymbol. (See the description of the %destructor directive above.) 80875897234SdrhThis directive does the same thing for all terminal symbols.</p> 80975897234Sdrh 81075897234Sdrh<p>Unlike non-terminal symbols which may each have a different data type 81175897234Sdrhfor their values, terminals all use the same data type (defined by 81275897234Sdrhthe %token_type directive) and so they use a common destructor. Other 81375897234Sdrhthan that, the token destructor works just like the non-terminal 81475897234Sdrhdestructors.</p> 81575897234Sdrh 81675897234Sdrh<h4>The <tt>%token_prefix</tt> directive</h4> 81775897234Sdrh 81875897234Sdrh<p>Lemon generates #defines that assign small integer constants 81975897234Sdrhto each terminal symbol in the grammar. If desired, Lemon will 82075897234Sdrhadd a prefix specified by this directive 82175897234Sdrhto each of the #defines it generates. 82275897234SdrhSo if the default output of Lemon looked like this: 82375897234Sdrh<pre> 82475897234Sdrh #define AND 1 82575897234Sdrh #define MINUS 2 82675897234Sdrh #define OR 3 82775897234Sdrh #define PLUS 4 82875897234Sdrh</pre> 82975897234SdrhYou can insert a statement into the grammar like this: 83075897234Sdrh<pre> 83175897234Sdrh %token_prefix TOKEN_ 83275897234Sdrh</pre> 83375897234Sdrhto cause Lemon to produce these symbols instead: 83475897234Sdrh<pre> 83575897234Sdrh #define TOKEN_AND 1 83675897234Sdrh #define TOKEN_MINUS 2 83775897234Sdrh #define TOKEN_OR 3 83875897234Sdrh #define TOKEN_PLUS 4 83975897234Sdrh</pre> 84075897234Sdrh 84175897234Sdrh<h4>The <tt>%token_type</tt> and <tt>%type</tt> directives</h4> 84275897234Sdrh 84375897234Sdrh<p>These directives are used to specify the data types for values 84475897234Sdrhon the parser's stack associated with terminal and non-terminal 84575897234Sdrhsymbols. The values of all terminal symbols must be of the same 84675897234Sdrhtype. This turns out to be the same data type as the 3rd parameter 84775897234Sdrhto the Parse() function generated by Lemon. Typically, you will 84875897234Sdrhmake the value of a terminal symbol by a pointer to some kind of 84975897234Sdrhtoken structure. Like this:</p> 85075897234Sdrh 85175897234Sdrh<p><pre> 85275897234Sdrh %token_type {Token*} 85375897234Sdrh</pre></p> 85475897234Sdrh 85575897234Sdrh<p>If the data type of terminals is not specified, the default value 85675897234Sdrhis ``int''.</p> 85775897234Sdrh 85875897234Sdrh<p>Non-terminal symbols can each have their own data types. Typically 85975897234Sdrhthe data type of a non-terminal is a pointer to the root of a parse-tree 86075897234Sdrhstructure that contains all information about that non-terminal. 86175897234SdrhFor example:</p> 86275897234Sdrh 86375897234Sdrh<p><pre> 86475897234Sdrh %type expr {Expr*} 86575897234Sdrh</pre></p> 86675897234Sdrh 86775897234Sdrh<p>Each entry on the parser's stack is actually a union containing 86875897234Sdrhinstances of all data types for every non-terminal and terminal symbol. 86975897234SdrhLemon will automatically use the correct element of this union depending 87075897234Sdrhon what the corresponding non-terminal or terminal symbol is. But 87175897234Sdrhthe grammar designer should keep in mind that the size of the union 87275897234Sdrhwill be the size of its largest element. So if you have a single 87375897234Sdrhnon-terminal whose data type requires 1K of storage, then your 100 87475897234Sdrhentry parser stack will require 100K of heap space. If you are willing 87575897234Sdrhand able to pay that price, fine. You just need to know.</p> 87675897234Sdrh 87775897234Sdrh<h3>Error Processing</h3> 87875897234Sdrh 87975897234Sdrh<p>After extensive experimentation over several years, it has been 88075897234Sdrhdiscovered that the error recovery strategy used by yacc is about 88175897234Sdrhas good as it gets. And so that is what Lemon uses.</p> 88275897234Sdrh 88375897234Sdrh<p>When a Lemon-generated parser encounters a syntax error, it 88475897234Sdrhfirst invokes the code specified by the %syntax_error directive, if 88575897234Sdrhany. It then enters its error recovery strategy. The error recovery 88675897234Sdrhstrategy is to begin popping the parsers stack until it enters a 88775897234Sdrhstate where it is permitted to shift a special non-terminal symbol 88875897234Sdrhnamed ``error''. It then shifts this non-terminal and continues 88975897234Sdrhparsing. But the %syntax_error routine will not be called again 89075897234Sdrhuntil at least three new tokens have been successfully shifted.</p> 89175897234Sdrh 89275897234Sdrh<p>If the parser pops its stack until the stack is empty, and it still 89375897234Sdrhis unable to shift the error symbol, then the %parse_failed routine 89475897234Sdrhis invoked and the parser resets itself to its start state, ready 89575897234Sdrhto begin parsing a new file. This is what will happen at the very 89675897234Sdrhfirst syntax error, of course, if there are no instances of the 89775897234Sdrh``error'' non-terminal in your grammar.</p> 89875897234Sdrh 89975897234Sdrh</body> 90075897234Sdrh</html> 901