12018-07-12 Martin Mares <[email protected]> 2 3 * Released as 3.6.1. 4 5 * Fixed compilation issues on Linux systems with MUSL libc. 6 72018-06-30 Martin Mares <[email protected]> 8 9 * Released as 3.6.0. 10 11 * BARs reported by the OS, but not set on the device itself are 12 reliably marked with "[virtual]". 13 14 * Library: Introduced a generic mechanism of string properties. This 15 avoids lots of special cases and makes ABI compatibility easier. 16 17 * On Linux systems with OpenFirmware, report corresponding device tree nodes 18 as device properties. 19 20 * VPD decoder knows several non-standard extensions. 21 22 * When PCIe link speed is less than the maximum supported by the 23 device, it is explicitly marked as "downgraded". 24 25 * Several new capabilities are not decoded yet, but at least their 26 names are printed. 27 28 * The Null capability is easily decoded. 29 30 * Formatting of several capabilities was cleaned up. 31 32 * The VGA16 bit in the bridge control register is now supported. 33 34 * Added a port to SylixOS. Thanks to YuJian Gong for contribution. 35 36 * Added a port to DOS/DJGPP. Thanks to Rudolf Marek for contribution. 37 38 * The order in which back-ends are probed was decoupled from the 39 internal back-end IDs. This helps, because new back-ends must have 40 their ID allocated at the end to keep the ABI, but they might need 41 to be proved earlier. 42 43 * The fbsd-device back-end should work again. 44 45 * Fixed a couple of bugs. Most notably, DeviceName was not printed. 46 47 * As usually, updated pci.ids to the current snapshot of the database. 48 492017-11-17 Martin Mares <[email protected]> 50 51 * Released as 3.5.6. 52 53 * Improvements of the FreeBSD back-end: read-only access for non-root, 54 support DragonFly BSD, support extended config space. 55 56 * MN VPD keyword is decoded correctly. 57 58 * As usually, updated pci.ids to the current snapshot of the database. 59 602017-07-05 Martin Mares <[email protected]> 61 62 * Released as 3.5.5. 63 64 * Better decoding of AER capability. 65 66 * "Slot Implemented" flag is decoded for PCI/PCI-X to PCIe bridges. 67 68 * Minor fixes of decoding other capabilities. 69 70 * As usually, updated pci.ids to the current snapshot of the database. 71 722017-02-25 Martin Mares <[email protected]> 73 74 * Released as 3.5.4. 75 76 * Previous version broke compilation on systems, for which lib/types.h 77 did not provide a 64-bit integer type. It is provided everywhere now. 78 792017-02-15 Martin Mares <[email protected]> 80 81 * Released as 3.5.3. 82 83 * When lspci looks for Linux kernel modules, it uses the default 84 path to module directory provided by libkmod. Previously, 85 it tried to construct the path explicitly, which need not 86 work on all systems. 87 88 * Improved formatting of memory and I/O ranges behind a bridge. 89 90 * PCIe link capabilities now display GEN4 speed (16GT/s). 91 92 * PCIe device capabilities now show bits related to atomic operations. 93 Thanks to Satanand Burla for a patch. 94 95 * As usually, updated pci.ids to the current snapshot of the database. 96 972016-10-03 Martin Mares <[email protected]> 98 99 * Released as 3.5.2. 100 101 * The L1 power management capability is now decoded more 102 thoroughly. Thanks to Rajat Jain for the patch. 103 104 * The table of configuration registers used by setpci 105 had a bug in the definition of SUBSYSTEM_VENDOR_ID. 106 1072016-05-22 Martin Mares <[email protected]> 108 109 * Released as 3.5.1. 110 111 * Fixed symbol versioning of pci_init(). 112 1132016-05-19 Martin Mares <[email protected]> 114 115 * Released as 3.5.0. 116 117 * New capabilities decoded: Downstream Port Containment, 118 Precision Time Measurement. Thanks to Keith Busch and 119 Jonathan Yong. 120 121 * Domain numbers extended to 31 bits. This will be used by the 122 Linux kernel on some machines in near future. 123 124 * Enhanced allocation regions are now decoded on Linux. 125 126 * The NetBSD back-end supports PCIe extended configuration space. 127 128 * Updated pci.ids to the current snapshot of the database. 129 1302016-01-03 Martin Mares <[email protected]> 131 132 * Released as 3.4.1. 133 134 * New capabilities decoded: Process Address Space, Page Request 135 Interface, Enhanced Allocation. Thanks to David Daney and 136 David Woodhouse. 137 138 * DevCap SlotPowerLimit is now decoded for all components with 139 upstream ports. 140 141 * Database mirror at SourceForge moved to GitHub. 142 143 * Updated pci.ids to the current snapshot of the database. 144 1452015-09-14 Martin Mares <[email protected]> 146 147 * Released as 3.4.0. 148 149 * On Linux, we report NUMA nodes of devices. 150 151 * The sysfs back-end does not die on read errors 152 of optional attributes. Instead, a warning is produced. 153 154 * Fixed several minor bugs. 155 156 * Updated pci.ids to the current snapshot of the database. 157 1582015-04-09 Martin Mares <[email protected]> 159 160 * Released as 3.3.1. 161 162 * Removed hacks for backward compatibility with Linux libc5, 163 which were breaking newer non-glibc Linux systems. Thanks 164 to Felix Janda. 165 166 * Display VirtIO vendor-specific capability. Patch by Gerd 167 Hoffmann. 168 169 * Fixed memory leak in name cache. 170 171 * Updated pci.ids to the current snapshot of the database. 172 1732014-11-10 Martin Mares <[email protected]> 174 175 * Released as 3.3.0. 176 (celebrating a one-year anniversary of the previous version :)) 177 178 * Device names exported by BIOS are displayed on Linux. 179 180 * On Linux systems, HWDB is used to look up device names 181 when our ID database gives no match. (More precisely, 182 HWDB is consulted after local pci.ids, but before using 183 network to query online pci.ids.) Thanks to Tom Gundersen 184 for the initial patch. 185 186 * Added experimental back-end for OS X / Darwin. Thanks to 187 Richard Yao for providing it. 188 189 * Filters now support matching by device class. Original 190 patch by Matthew Wilcox, wrappers for ABI compatibility 191 by me. 192 193 * Interrupt Pin and Interrupt Line registers are displayed 194 for bridge devices, too. 195 196 * Several portability bugs have been fixed. 197 198 * Several typos have been fixed. Also, use of questionable 199 constructs in man pages has been reduced. 200 201 * PCIe link capabilities now include the ASPMOptComp bit. 202 203 * The "CRS Software Visibility" bit is now decoded properly. 204 205 * Updated pci.ids to the current snapshot of the database. 206 2072013-11-10 Martin Mares <[email protected]> 208 209 * Released as 3.2.1. 210 211 * CardBus bridge capabilities are displayed. 212 213 * PCIe L1 PM substates are decoded. 214 215 * Various bugs were fixed in decoding of PCIe capabilities. 216 217 * The sysfs back-end does not spit out unnecessary warnings when 218 empty slots report only a partial device address. This actually 219 happens on IBM pSeries. 220 221 * Updated pci.ids to the today's snapshot of the database. 222 2232013-04-19 Martin Mares <[email protected]> 224 225 * Released as 3.2.0. 226 227 * On newer Linux systems, we use libkmod to look up kernel modules 228 (modules.pcimap no longer exists). To facilitate this, libpci 229 is able to look up module aliases in sysfs. 230 231 * Various minor bug fixes. 232 233 * Updated pci.ids to the today's snapshot of the database. 234 2352012-06-25 Martin Mares <[email protected]> 236 237 * Released as 3.1.10. 238 239 * Decoding of LTR/OBFF in PCIe capabilities. 240 241 * Various minor bug fixes. 242 243 * Updated pci.ids to the today's snapshot of the database. 244 2452012-01-14 Martin Mares <[email protected]> 246 247 * Released as 3.1.9. 248 249 * Updated README. 250 251 * Wherever we mention the PCI ID database, we now refer to 252 http://pci-ids.ucw.cz/ and the sf.net site is mentioned only 253 as a mirror. This includes update-pciids. 254 255 * Decode PCIe Gen 3 speeds and link status fields. 256 257 * Various minor bug fixes. 258 259 * Updated pci.ids to the today's snapshot of the database. 260 2612011-10-02 Martin Mares <[email protected]> 262 263 * Released as 3.1.8. 264 265 * More capabilities: Transaction Processing Hints, Latency Tolerance 266 Reporting. Thanks to Jesse Barnes. 267 268 * Added BeOS and Haiku ports. Contributed by Francois Revol. 269 270 * pciutils.pc now uses Libs.private properly. 271 272 * When we format a name and it does not fit in the buffer, we truncate 273 it instead of returning "buffer too small" instead. This works on all 274 platforms with sane (i.e., C99-compatible) snprintf(). 275 276 * Various minor bug fixes. 277 278 * Updated pci.ids to the today's snapshot of the database. 279 2802010-01-31 Martin Mares <[email protected]> 281 282 * Released as 3.1.7. 283 284 * Minor improvements and bug fixes in decoding of the Virtual Channel 285 capability. 286 2872010-01-24 Martin Mares <[email protected]> 288 289 * Released as 3.1.6. 290 291 * More capabilities decoded: Virtual Channel (except arbitration 292 tables), Root Complex Link, Vendor-Specific (header only), SATA HBA. 293 294 * All extended capabilities have their version displayed (-vv or more). 295 2962010-01-19 Martin Mares <[email protected]> 297 298 * Released as 3.1.5. 299 300 * Updated pci.ids to the today's snapshot of the database. 301 302 * When scanning extended capabilities, properly mask the lowest 2 bits, 303 which are currently reserved. This avoids unaligned access errors on 304 broken hardware (see tests/broken-ecaps). 305 306 * Large bar sizes are displayed in human-readable format (with units). 307 Thanks to Matthew Wilcox. 308 309 * Physical slot information is displayed correctly for multi-function cards. 310 Fixed by Matthew Wilcox. 311 312 * Fixed a couple of typos everywhere. 313 314 * Library: Fixed bugs in freeing of capabilities. 315 316 * Windows back-end compiles again. 317 3182009-08-14 Martin Mares <[email protected]> 319 320 * Released as 3.1.4. 321 (sorry that I have missed 22/7 and released it later :-)) 322 323 * Updated pci.ids to the today's snapshot of the database. 324 325 * Fixed memory and file descriptor leak in the dump back-end. 326 327 * The SR-IOV capability decoder now prints the VF BAR's. 328 Patch by Chris Wright, cleaned up by me. 329 330 * On request of certain company's lawyers, we now include a copy 331 of the GPL with our package. It seems that the pciutils are getting 332 mature if the most important bug of the month was this one ;-) 333 3342009-07-04 Martin Mares <[email protected]> 335 336 * Released as 3.1.3. 337 338 * Updated pci.ids to the current snapshot of the database. 339 340 * The VPD parser now reports unknown and vendor-defined items 341 properly. It also stops on any item in unknown format, avoiding long 342 output on bogus VPD data. Thanks to Ben Hutchings and Matthew Wilcox. 343 344 * The MSI-X table size now matches the spec. Thanks to Michael S. 345 Tsirkin. 346 347 * The Power Management capability now includes the soft reset bit. 348 Thanks to Yu Zhao. 349 350 * Decoding of the Advanced Features capability has been added. 351 Thanks to Yu Zhao. 352 353 * The whole package compiles on GNU/kFreeBSD again. 354 355 The following patches have been contributed by Matthew Wilcox: 356 357 * The procfs back-end is able to cope with /proc/bus/pci 358 containing names with domains, which occur on sparc64 and 359 possibly other architectures due to a kernel bug. 360 361 * The sysfs back-end no longer complains when a slot address 362 is missing, which happens with old versions of Linux fakephp. 363 364 * The Device Serial Number capability is printed in the right 365 byte order. 366 367 * The MSI and MSI-X capabilities are printed in a prettier way. 368 369 * The tree output mode (`lspci -t') shows domain numbers only 370 at the root, which makes the output more compact. 371 372 * Updated documentation on the bus mapping mode (`lspci -M'). 373 3742009-02-01 Martin Mares <[email protected]> 375 376 * Released as 3.1.2. 377 378 * Fixed another silly bug in the command-line parser of setpci. 379 3802009-01-30 Martin Mares <[email protected]> 381 382 * Released as 3.1.1. 383 384 * Updated pci.ids to the current snapshot of the database. 385 386 * The configure script now sets LC_ALL to avoid being fooled by 387 locale-dependent behavior of `tr'. 388 389 * The command-line parser of setpci did sometimes segfault on invalid 390 input. Thanks to Andreas Wiese for a fix. 391 3922009-01-18 Martin Mares <[email protected]> 393 394 * Released as 3.1.0. 395 396 * Updated pci.ids to the current snapshot of the database. 397 398 * The Cygwin backend now works on Windows Vista. Thanks to Jonathan 399 Kotta. 400 401 * Fixed a bug in decoding of the SR-IOV capability. Patch by Yu Zhao. 402 403 * Details of some PCIe capabilities are displayed only with -vv. 404 405 * When a BAR is reported by the OS, but not by the device (i.e., 406 it is marked as [virtual] in lspci), the [disabled] flag is 407 suppressed, because it does not make sense in such cases. 408 Patch by Yu Zhao. 409 4102008-12-13 Martin Mares <[email protected]> 411 412 * The source code of lspci has been split to multiple files, hopefully 413 making it easier to maintain. 414 415 * The library and lspci now know about physical slot names. So far, 416 they are provided by the sysfs back-end only. Thanks go to Alex Chiang. 417 418 * When a device has the VPD (Vital Product Data) capability and the 419 VPD data are supplied by the OS, they are decoded and printed in the 420 verbose mode. This currently works only on Linux with the sysfs 421 back-end. Thanks to Ben Hutchings of Solarflare for the patch. 422 423 * `setpci --version' now works properly. 424 425 * `setpci --dumpregs' prints a table of all known names of 426 registers and capabilities. This replaces the table of registers 427 in the setpci man page. 428 429 * The dry-run mode of setpci gives better feedback. 430 431 * The setpci utility is now able to address registers stored in PCI 432 capabilities (actually it allows a more general form of relative 433 addressing). 434 435 * The library has gained functions for working with PCI capabilities. 436 437 * Address Translation Services capability is now decoded. Patch by 438 Yu Zhao. 439 4402008-11-09 Martin Mares <[email protected]> 441 442 * Released as 3.0.3. 443 444 * `lspci -k' now displays the subsystem ID, too. This makes `-k' 445 show everything needed to identify the device and the available 446 drivers, which was called for by many users. 447 448 * Fixed spelling of MSI. Patch by Matthew Wilcox. 449 450 * Better support for cross-compilation. Thanks to Alon Bar-Lev 451 for the patch. 452 453 * Fixed printing of the AER capability. Patch by Max Asbock. 454 455 * HT 1.02 capabilities are decoded as HT 1.03. Suggested by 456 Carl-Daniel Hailfinger. 457 458 * Fixed Cygwin build. Thanks to Steve Elliott for reporting the bug. 459 460 * Updated pci.ids to the current snapshot of the database. 461 4622008-09-19 Martin Mares <[email protected]> 463 464 * Released as 3.0.2. 465 466 * Fixed a minor bug in the configure script, which caused warnings 467 about redefinition of symbols during compilation. 468 4692008-09-11 Martin Mares <[email protected]> 470 471 * Released as 3.0.1. 472 473 * Updated pci.ids to the most recent snapshot. 474 475 * Added a Cygwin port. Patch by Christopher Voltz, ported to the 476 current tree by Martin Mares. 477 478 * Worked around compatibility problems with various default settings 479 of wget (we have to set --no-timestamping explicitly). Thanks to Ville 480 Skytta for pointing that out. 481 482 * Fixed printing of MSI capabilities. Thanks to Matthew Wilcox for 483 a patch. 484 485 * Added decoding of several PCI-X capabilities: device/link/slot 2, 486 Advanced Error Reporting, Access Control Services, Alternative Routing-ID, 487 Single Root I/O Virtualization. Thanks to Yu Zhao for patches. 488 489 * Fixed bug in filters which caused them to refuse vendor/device ID 0xffff. 490 491 * README: The linux-pci mailing list has moved to [email protected]. 492 493 * Fixed several build problems: builds without PCI_USE_DNS on Linux 494 and with PCI_USE_DNS on Solaris and *BSD. Static library mode also 495 compiles again on old versions of GCC. 496 4972008-04-10 Martin Mares <[email protected]> 498 499 * Released as 3.0.0. 500 501 * Updated API and ABI version. 502 5032008-02-20 Martin Mares <[email protected]> 504 505 * Released as 2.99.1-alpha2. 506 507 * Changed the default domain for the DNS resolver. 508 5092008-02-18 Martin Mares <[email protected]> 510 511 * Released as 2.99.1-alpha1. 512 513 * The makefile system has been reworked. All configuration settings 514 are now passed to the configure script in environment variables, 515 allowing for easy tweaking in the top-level Makefile. All control 516 knobs are now described in the README. 517 518 * The libpci can be built as a shared library with properly restricted 519 symbol exports. Use `make SHARED=yes' to enable that or `make SHARED=local' 520 for a local testing build (with hardwired paths to the library, so that 521 it does not need installation). 522 523 * The example program has been moved from lib/example.c to the top-level 524 directory, because it should be built exactly as the other utilities 525 are. It has been also improved slightly to educate better. 526 527 * The i386-ports method is enabled on Linux/x86_64 as well. 528 5292008-02-13 Martin Mares <[email protected]> 530 531 * Released as 2.2.10-net2. 532 533 * Support for resolving of PCI ID's using DNS together with a local 534 cache of resolved entries has been added. See the `-q' and `-Q' options 535 of lspci. 536 537 * The library now has a generic system of settable parameters, which 538 also include settings of the DNS resolver and cache. An `-O' option 539 has been added to lspci and setpci to allow setting of these options. 540 541 * Configuration of the access methods are now specified by the new 542 parameter system, replacing the pci_access->method_params array. 543 544 * Access methods now also have sensible names and help texts and it 545 is possible to look up method ID by a name. 546 547 * An `-A' switch has been added to both lspci and setpci, allowing to 548 select an arbitrary access method. The `-P' switch (configure proc 549 backend) has been removed as it is no longer needed and I do not know 550 any its user. 551 552 * Several source files have been split for better maintainability 553 (most notably the resolving of ID's). 554 555 * Man pages and help texts have been updated. A new man page `pcilib(7)' 556 has been added and description of library options has been moved there. 557 558 * When an unknown device ID is encountered, we print `Device <id>' 559 instead of `Unknown device <id>'. It uses less space and it also 560 should reduce the number of inexperienced users complaining that 561 the device is not supported by the OS. To lookup up OS drivers, 562 use the `-k' option. 563 564 * PCI_LIB_VERSION has been bumped to 0x020299. 565 566 * Makefile: stripping of the binaries during installation can be 567 overridden by the STRIP variable. 568 569 * lib/types.h: We use the integer types from <stdint.h> if the 570 compiler claims C99 support. 571 5722008-02-11 Martin Mares <[email protected]> 573 574 * Released as 2.2.10. 575 576 * lspci.c, setpci.c: Cleaned up the list of options. 577 578 * lib/names.c: Fix displaying of errors reported by zlib. 579 Previously, the buffer containing the error message had 580 been deallocated by gzclose() before the message was printed. 581 5822008-01-07 Martin Mares <[email protected]> 583 584 * update-pciids.sh: Added quiet mode (-q). Clean up uncompressed 585 files left by previous versions of the pciutils. Patch by Mike 586 Frysinger. 587 588 * update-pciids.man: Mention the -q switch. 589 5902007-11-29 Martin Mares <[email protected]> 591 592 * lib/dump.c: Squashed compiler warnings about code with 593 no effect (there really were surplus *'s). 594 5952007-11-06 Martin Mares <[email protected]> 596 597 * Released as 2.2.9. 598 599 * lspci.c: Added a new switch `-k' which requests printing 600 of information on kernel drivers attached to each device 601 and on kernel modules reporting the ability to handle the 602 device. So far, this is supported only on Linux with the 603 sysfs back-end, so it is implemented internally in the lspci 604 instead of the libpci. Thanks to Anicka <[email protected]> 605 for help. 606 6072007-10-19 Martin Mares <[email protected]> 608 609 * Makefile, lib/Makefile: Moved -lz from LDFLAGS to LDLIBS. 610 Also added an explicit pattern rule for linking to make sure 611 that LDLIBS is used on all platforms. Thanks to Dan Nicholson 612 for the suggestion. 613 6142007-10-19 Martin Mares <[email protected]> 615 616 * Released as 2.2.8. 617 618 * pci.ids: Revised class codes to match Conventional PCI 3.0 specs. 619 Added a couple of new ones, renumbered `ADMA continuous operation' 620 prog-if to 0x30 (even the old SATA Class Code ECN doesn't mention 621 0x40) and renumbered the satellite communication controllers. 622 623 * lib/header.h: Include `PCI hot-plug' and `Secure device' 624 capabilities from PCI 3.0 specs. Also added `SATA HBA' and 625 `Advanced features' caps from various ECN's. 626 627 * lspci.c: All known capabilities have at least their name displayed 628 now. When we are unable to decode them completely, we signalize it 629 with a `<?>' mark. 630 631 * lspci.man: Document `<?>' and also mention that extended config 632 space is currently available only with the linux_sysfs back-end. 633 634 * lspci.c: Decode the Debug port capability (per EHCI 0.96 spec). 635 636 * lspci.c: Big code cleanup: re-arranged functions in the code, 637 renamed everything related to capabilities to cap_* and 638 all options except verbose to opt_*. 639 6402007-10-14 Martin Mares <[email protected]> 641 642 * lib/[fno]bsd-*: Removed extraneous braces. 643 6442007-10-12 Martin Mares <[email protected]> 645 646 * Capability loop detection introduced 2.2.7 did not work 647 properly with extended capabilities. Fixed. 648 6492007-10-05 Martin Mares <[email protected]> 650 651 * Released as 2.2.7. 652 653 * lspci.c (show_caps, show_ext_caps): Detect and report loops in 654 capability lists. 655 656 * lspci.c, lib/header.h: Finished decoding of the PCI Express 657 capability. The extended capabilities remain undecoded for now, 658 but at least the list of them has been updated to reflect the 659 current PCI Express 2.0 spec. 660 661 * lspci.c, lib/header.h: Decode new bits of traditional registers 662 as defined by PCIE / PCI-X. This includes discard timers in the bridge 663 control register and INTx enable/status in device control/status 664 registers. 665 666 * lib/fbsd-device.c: Support domains on new FreeBSD's. Contributed 667 by Marius Strobl. 668 6692007-09-12 Hasso Tepper <[email protected]> 670 671 * Extended the fbsd-device backend to run on Dragonfly BSD. 672 673 * lspci.c: alloca() is declared in <stdlib.h> on BSD's, not <alloca.h>. 674 6752007-09-03 Martin Mares <[email protected]> 676 677 * Resurrected the Windows port, including cross-compilation by MinGW. 678 Patch by Samuel Bronson <[email protected]>. 679 6802007-08-31 Martin Mares <[email protected]> 681 682 * Makefile, lib/Makefile: `ar' and `ranlib' can be overriden to allow 683 cross-compilation. 684 6852007-08-27 Martin Mares <[email protected]> 686 687 * lib/names.c (pci_open): When calling gzopen(), use "rb" file mode 688 instead of "r". This is needed on DOS systems, where this function 689 somewhat illogically uses the binary flag for the compressed file 690 instead of the decompressed stream inside, where binariness really 691 matters. 692 6932007-08-14 Martin Mares <[email protected]> 694 695 * lspci.c (show_ht): Added decoding of Hypertransport MSI mapping capability, 696 based on a patch by Jason Gunthorpe. 697 698 * tests/cap-MSI-mapping: Added a test case. I plan to add test cases 699 (which are dumps of config space) for all new features. 700 7012007-06-20 Martin Mares <[email protected]> 702 703 * Released as 2.2.6. 704 705 * Makefile: Added an "install-lib" target. Thanks to Dan Nicholson 706 for a patch. 707 708 * Makefile, lib/Makefile: Generate and install pkg-config file 709 for libpci. Again by Dan Nicholson. 710 7112007-06-20 Thomas Schwinge <[email protected]> 712 713 * lib/i386-io-hurd.h: Rewritten for new Hurd kernels. 714 7152007-05-04 Martin Mares <[email protected]> 716 717 * Released as 2.2.5. 718 719 * pci.ids: Updated to the current snapshot of the database. 720 7212007-02-14 Martin Mares <[email protected]> 722 723 * lspci.c (show_express): Added PCI/PCI-X to PCI-Express Bridge type. 724 Patch by Mark Glines. 725 7262007-02-09 Martin Mares <[email protected]> 727 728 * pci.ids: Updated to the current snapshot of the database. 729 7302007-02-06 Martin Mares <[email protected]> 731 732 * Replaced bzero() by memset() everywhere, it's better to lose a tiny 733 bit of readability than maintain hacks to make it work on various systems. 734 735 * lib/configure: tr on Solaris is a bit weird and it requires `[A-Z]' 736 instead of `A-Z'. Fortunately, the extra brackets don't hurt otherwise. 737 738 * lib/types.h, lib/configure: Solaris should use <stdint.h> to get precise 739 integer types. 740 7412007-02-04 Martin Mares <[email protected]> 742 743 * lspci.c: alloca() needs <alloca.h>. 744 7452006-09-17 Martin Mares <[email protected]> 746 747 * lib/dump.c: Fixed a couple of bugs in the dump backend which caused 748 devices with domains or with extended config space to be read incorrectly. 749 Also, dumps with partial lines are allowed now. 750 7512006-09-10 Martin Mares <[email protected]> 752 753 * pci.ids: Updated to the current database snapshot. 754 755 * lspci.c (scan_device): If an error occurs when reading the standard config 756 header of a device, report it and ignore the device and return with exit 757 code 2 at the end. 758 7592006-09-09 Martin Mares <[email protected]> 760 761 * Released as 2.2.4. 762 763 * maint/release: Remind the maintainer about the current PCI_LIB_VERSION. 764 765 * lib/pci.h: Updated PCI_LIB_VERSION. 766 767 * lspci.c (show_machine): In the `-m' mode, do proper shell escaping 768 if the fields printed contain quotes or backslashes. 769 770 * lspci.c (show_machine): Added a `-vmm' mode, which removes the misuse 771 of the `Device' tag for two different purposes. 772 773 * Makefile: Moved all system-dependent decisions to lib/configure, 774 since config.mk is included in the top-level Makefile anyway. 775 776 * lib/configure: When configuring for Linux, ignore the kernel version 777 and always build all access methods. 778 779 * Makefile (CFLAGS): Removed -Winline, it's not needed and triggers 780 at many non-interesting places with gcc 3.4. 781 782 * Whitespace cleanup of all source files. 783 784 * The pci.ids file can be stored compressed if zlib is available. 785 Added transparent decompression to lib/names.c, modified update-pciids.sh 786 to keep the file compressed if applicable, updated Makefiles. 787 Based on a patch by Matthew Wilcox, but all the bugs are mine. 788 789 * Makefile, README: Allow installation to be done to a different directory 790 from the one we will eventually be placed in by setting DESTDIR. 791 Patch by Matthew Wilcox. 792 793 * Added .gitignore files. 794 795 * Makefile (clean): Clean *.orig, too. 796 797 * Cleaned up usage of `char' and `byte'. 798 799 * lib/header.h: PCI_CLASS_DOCKING_OTHER should be 0x0a80, not 0x0a01. 800 801 * lib/header.h: Added PCI_CLASS_xxx constants for all classes currently 802 defined in the pci.ids file. 803 8042006-08-01 Martin Mares <[email protected]> 805 806 * lib/i386-io-hurd.h: Fixed a silly typo. 807 8082006-07-30 Martin Mares <[email protected]> 809 810 * lib/Makefile: Added a missing rule for obsd-device.o. 811 812 * lspci.c, lib/header.h: Added support for MSI per-vector masking. 813 Contributed by Petr Vandrovec. 814 815 * lspci.c, lib/header.h: Added support for the `bridge subsystem ID' 816 capability. Contributed by Petr Vandrovec. 817 818 * lspci.c (show_htype1): Fixed bug in printing of 64-bit prefetchable 819 memory windows. Fix by Petr Vandrovec. 820 821 * maint/release.pm: Exclude .git directory from releases. 822 823 * lib/i386-ports.c, lib/i386-io-*: Report failures during port access 824 initialization by a->warn() instead of calling printf() or perror() 825 directly. 826 827 * lib/i386-ports.c, lib/i386-io-*: Moved the logic which keeps track of 828 the port access state to generic code. 829 830 * lib/i386-io-hurd.h: Ask the kernel for I/O port access appropriately. 831 Contributed by Thomas Schwinge and Samuel Thibault. 832 833 * lib/i386-ports.c: Define _GNU_SOURCE, it's needed by the Hurd module. 834 835 * lib/header.h: Whitespace cleanups. 836 837 * lib/i386-io-windows.h: Fixed indentation and spelling. 838 839 * README.Windows: Mention that WinIO.dll is needed and where to get it. 840 8412006-06-27 Martin Mares <[email protected]> 842 843 * lib/Makefile, Makefile: Added rules for building and cleaning the example. 844 845 * lib/example.c: Show how to use PCI_FILL_CLASS and used another register 846 for demonstrating the config space accesses. The example is still very 847 incomplete, though. 848 849 * lib/pci.h, lib/generic.c: Added PCI_FILL_CLASS. 850 851 * lib/sysfs.c: Fetch device ID and class from sysfs, because they can 852 be modified by kernel fixups. 853 854 * lspci.c: Use PCI_FILL_CLASS. Thanks to Matthew Willcox for the patch. 855 8562006-06-03 Martin Mares <[email protected]> 857 858 * lspci.c: Introduced the -nn switch. Thanks to David N. Welton 859 for the idea. 860 861 * lib/names.c (pci_lookup_name): Introduced PCI_LOOKUP_MIXED and 862 cleaned up the name selection code. 863 864 * lib/names.c (pci_lookup_name): If PCI_LOOKUP_NO_NUMBERS is given, 865 pci_access->numeric_ids is ignored. 866 867 * lib/names.c (pci_lookup_name): When class is identified and 868 subclass isn't, display class name and subclass number. 869 8702006-05-31 Martin Mares <[email protected]> 871 872 * setpci.c (main): Don't crash when an invalid width is specified. 873 874 * lspci.c, setpci.c, common.c: die() now uses the right program 875 name when printing an error message. 876 8772006-05-19 Martin Mares <[email protected]> 878 879 * README: Mention the public GIT tree. 880 881 * README: Updated the list of ports. 882 8832006-05-10 Martin Mares <[email protected]> 884 885 * lib/configure, lib/fbsd-device.c: Added support for GNU/kFreeBSD. 886 Thanks to Petr Salinger for the patch. 887 8882006-05-05 Martin Mares <[email protected]> 889 890 * Released as 2.2.3. 891 892 * lspci.c (scan_device): The -D switch didn't work as intended 893 in -m mode. 894 8952006-05-05 Martin Mares <[email protected]> 896 897 * Released as 2.2.2. 898 899 * pci.ids: Updated to the current database snapshot. 900 901 * lib/obsd-device.c (and other files in lib/*): Added OpenBSD 902 interface by Matthieu Herrb <[email protected]>, based on 903 the existing FreeBSD interface. 904 905 * Moved pciutils to a GIT repository, which now contains merged 906 history from both CVS and Arch. Good bye, TLA! 907 9082006-03-21 Martin Mares <[email protected]> 909 910 * lspci.c (show_slot_name): Avoid the previous changes in default 911 display of domain name when in machine-readable mode. However, `-D' 912 forces domain display even there. 913 914 * lspci.man: Added a warning on -m being the only format, which is 915 guaranteed to be stable between lspci versions. 916 9172006-03-13 Martin Mares <[email protected]> 918 919 * lspci.man: Documented the -D switch. 920 921 * lspci.c (show_slot_name, scan_device): If there are multiple PCI 922 domains or if the `-D' switch is used, show the domain number for 923 all devices. 924 925 * lspci.c (show_verbose): Report cache line size in bytes. 926 927 * update-pciids.sh: Use curl if available. Patch by Matthew Wilcox. 928 9292006-01-04 Martin Mares <[email protected]> 930 931 * lspci.c (show_express_link): Fixed decoding of link status register. 932 Thanks to Roland Dreier for his report. 933 9342005-12-12 Martin Mares <[email protected]> 935 936 * lib/nbsd-libpci.c: If libpci is used by an ordinary user, allow 937 at least read-only access. Patch by Pavel Celeda <[email protected]>. 938 939 * Makefile: Corrected library path on NetBSD. 940 9412005-11-26 Martin Mares <[email protected]> 942 943 * Released as 2.2.1. 944 945 * lspci.c (show_machine): Subsystem vendors were printed incorrectly 946 in machine-readable modes. Thanks to Pavel Celeda for a bug report. 947 9482005-10-11 Martin Mares <[email protected]> 949 950 * lspci.c (new_bus): Fixed a memory leak. Thanks to Paul Sangree for reporting it. 951 9522005-09-21 Martin Mares <[email protected]> 953 954 * Released as 2.2.0. 955 956 * pci.ids: Updated copyright header. 957 958 * lib/sysfs.c (sysfs_get_resources): Removed warning about unsupported 959 64-bit addresses, they are now always supported. 960 961 * lspci.c (show_bases): Corrected printing of 64-bit addresses 962 in bus-centric mode. 963 964 * lib/configure: Enable 64-bit addresses on all Linux systems. 965 966 * lib/types.h: Don't pad 64-bit addresses to 16 xigits, only to 8 if they 967 are shorter. 968 9692005-09-11 Martin Mares <[email protected]> 970 971 * Released as 2.1.99-test11. 972 973 * lspci.c: Removed unnecessary trailing zeros in pci_lookup_name() calls. 974 9752005-09-10 Martin Mares <[email protected]> 976 977 * Released as 2.1.99-test10. 978 979 * pci.ids: Synchronized with the current database snapshot. 980 981 * update-pciids.sh: Changed the default URL for downloading pci.ids 982 to http://pciids.sourceforge.net/v2.2/pci.ids. 983 984 * lib/pci.h (PCI_LIB_VERSION): Added version identifier. 985 986 * lib/names.c: Rewritten the name database module almost from scratch. 987 Everything is much cleaner and there are hopefully no more memory leaks; 988 pci_lookup_name() now uses varargs in a backward compatible fashion. 989 Introduced PCI_LOOKUP_NO_NUMBERS. 990 991 The new code supports subsystem entries not tied to a specific device. 992 I had to extend the format of pci.ids in order to support it, so I have 993 extended the idea of the "C" (class) blocks and introduced "S" blocks 994 for subsystems. To avoid doing more incompatible changes in the future, 995 the parser skips unknown single-letter blocks without reporting errors. 996 9972005-08-23 Martin Mares <[email protected]> 998 999 * Released as 2.1.99-test9. 1000 1001 * Makefile (OPT): Removed -fomit-frame-pointer, it's default in recent 1002 gcc versions when optimizing anyway. 1003 1004 * Made the path to pci.ids customizable and independent on the SHAREDIR. 1005 Just override IDSDIR in the top-level Makefile. 1006 1007 * pci.ids: Synchronized with the current database snapshot. 1008 1009 * lspci.man, setpci.man: Improved the man pages. Documented all access 1010 methods and which operations are privileged. 1011 1012 * lspci.c: Another rewrite of config register caching, now also including 1013 lots of internal checks. It should be now perfectly able to cope with 1014 portions of the configuration space being inaccessible, for example 1015 due to insufficient access rights. 1016 1017 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Cleaned up dumping of PCI-X 1018 capabilities. Includes partial support for PCI-X 2.0 (probably incomplete 1019 as I haven't seen the spec). 1020 1021 * lspci.c: Quell warnings about unused parameters. 1022 1023 * lspci.c: Removed C++ comments. 1024 1025 * lib/header.h: Merged definitions of extended capabilities and some new 1026 PCI-X capability bits from linux-2.6.11/include/pci.h. 1027 1028 * lspci.c (show_caps): Try to scan extended capabilities only if the 1029 device has either PCI-X or PCI Express capability in its normal capability 1030 list. 1031 1032 * lib/dump.c (dump_init): Reading of dumps works again. The dump reader 1033 now also remembers how much data it has read and refuses attempts to 1034 access more than that. 1035 1036 * setpci.man, lspci.c, README: prefer spelling "buses" over "busses". 1037 1038 * lspci.c: If alloca() is not available, use xmalloc(), not malloc(). 1039 1040 * lib/configure: Added x86_64 on Linux. 1041 10422005-08-22 Martin Mares <[email protected]> 1043 1044 * lib/filter.c (pci_filter_parse_slot): Fixed parsing of domain filters. 1045 Thanks to Matthew Wilcox for bug report. 1046 1047 * lspci.c: Corrected spelling of "Hz" (it was "hz" at several places). 1048 Thanks to Krzysztof Oledzki for pointing that out. 1049 10502004-08-19 Martin Mares <[email protected]> 1051 1052 * pciutils.spec (%attr): Setting attributes for /sbin/* is an anachronism, 1053 because pciutils by default install to /usr/sbin. Update. 1054 10552004-08-13 Martin Mares <[email protected]> 1056 1057 * Released as 2.1.99-test8. 1058 1059 * lib/types.h, lib/pci.h, lib/sysdep.h: `byte' and `word' are 1060 no longer exported to the outside world. 1061 1062 * README.Windows: Updated. 1063 1064 * maint/release: Substitute version number in win32/config.h. 1065 1066 * win32/config.h: Added. 1067 1068 * lib/sysdep.h (bzero, strcasecmp): are macros on Windows. 1069 1070 * compat/getopt.[ch]: Added copies of getopt.[ch] from the GNU 1071 C library for use on systems where the default libraries lack 1072 proper getopt. Currently used by the Windows port. 1073 1074 * lib/sysdep.h, lib/types.h: Updates of the Windows port from 1075 Alexander Stock. 1076 1077 * lib/types.h: If PCI_HAVE_Uxx_TYPES is defined, libpci doesn't define 1078 its own u8, u16, u32, byte and word types and uses what the user 1079 has supplied instead. With this change, all namespace clashes should 1080 be gone. 1081 1082 * Makefile, lib/Makefile: Updated dependencies. 1083 1084 * pciutils.h: Include lib/sysdep.h and move NONRET et al. there. 1085 1086 * lib/sysdep.h: No need to include <sys/types.h> on FreeBSD, because 1087 it is included unconditionally in lib/types.h. 1088 1089 * Moved system-dependent stuff from lib/internal.h to lib/sysdep.h, 1090 which is also used by the utilities. Also moved type declarations 1091 from lib/pci.h to lib/types.h. 1092 1093 * All files: Prepend a "PCI_" prefix in front of all configuration 1094 defines to avoid namespace clashes. CAVEAT: If there is any libpci 1095 application using the (undocumented) defines, it has to be updated. 1096 1097 * lib/Makefile: Killed HAVE_OWN_HEADER_H, since we stopped sharing 1098 headers with the kernel a couple of years ago. 1099 1100 * lib/sysfs.c (sysfs_get_resources): We have 7 resources, not 6. 1101 1102 * lspci.c (show_rom): Use the same logic for printing disabled 1103 or unassigned ROM's as we do in show_bases() for the other BAR's. 1104 1105 * lib/generic.c (pci_generic_fill_info): Better reaction to 1106 invalid 64-bit addresses. Also d->hdrtype should not include 1107 bit 7, which caused mysterious errors on multi-function devices. 1108 1109 * lib/generic.c (pci_generic_fill_info): Fill in base addresses 1110 even if the regions are known to be disabled. It is the client's 1111 job to interpret them. (And it is not a trivial job if you want 1112 to do it correctly, since you need to check I/O and memory enables 1113 on all upstream bridges, too.) However, it could be interesting to 1114 introduce functions for interpreting the addresses and even for 1115 mapping the regions and doing I/O on them. 1116 11172004-07-30 Martin Mares <[email protected]> 1118 1119 * lspci.c: HyperTransport improvements from Maciej. 1120 11212004-07-11 Martin Mares <[email protected]> 1122 1123 * lib/sysfs.c (sysfs_get_resources): Arguments now correspond 1124 to the format string. [Patch by Bill Nottingham] 1125 11262004-07-05 Martin Mares <[email protected]> 1127 1128 * Released as 2.1.99-test7. 1129 1130 * lspci.c (config_fetch): Wanted to merge Matthew's bug fix, but 1131 ended up with rewriting the fetching mechanism to be fully dynamic, 1132 but avoid reading config space registers not explicitly requested. 1133 11342004-06-29 Matthew Wilcox <[email protected]> 1135 1136 * lspci.c: More work on PCI Express dumping. 1137 1138 * lib/header.h: Updated PCI Express capability definitions. 1139 1140 * lib/proc.c (proc_read): Removed bogus warning. 1141 1142 * common.c (xrealloc): Introduced. 1143 1144 * lspci.man: Added -xxxx. 1145 11462004-06-27 Martin Mares <[email protected]> 1147 1148 * Released as 2.1.99-test6. 1149 1150 * lspci.c (show_msix), lib/header.h: Added dumping of MSI-X cap. 1151 Patch by Roland Dreier <[email protected]>, cleaned up by me. 1152 1153 * lspci.c (show_pcix_nobridge, show_pcix_bridge): Handle config_fetch() 1154 failures. 1155 1156 * lib/header.h: Added PCI Express extended capabilities. Again by Matthew. 1157 1158 * lspci.c (show_express): Added dumping of PCI Express cap. 1159 Patch by Matthew Wilcox. 1160 1161 * lib/header.h: Added a list of PCI 3.0 capabilities and also details 1162 on PCI Express caps. Patch by Matthew Wilcox <[email protected]>. 1163 1164 * lspci.c (check_root): Gone. No explicit checks for root are needed, 1165 report correct errors reported by the libpci instead. 1166 1167 * lspci.c: Added dumping of the extended config space on "-xxxx". 1168 Better caching of config registers. 1169 1170 * setpci.c (main): Allow access to whole 4096 bytes of the config space. 1171 1172 * lib/sysfs.c, lib/proc.c: Don't print error messages on short reads, 1173 just return the appropriate error code. 1174 1175 * lib: Added support for extended (4096-byte) configuration space, 1176 currently implemented only in Linux proc and sysfs access methods 1177 and of course in the dump reader. 1178 11792004-05-29 Martin Mares <[email protected]> 1180 1181 * Released as 2.1.99-test5. 1182 1183 * lib/pci.h: Windows don't have the standard u_int* types. 1184 1185 * lib/internal.h: <sys/param.h> required on Windows for endianity 1186 macros. 1187 1188 * lib/i386-ports.c: Connected i386-io-windows.h. 1189 1190 * lspci.c (check_root): geteuid() is not available on Windows. 1191 1192 * lib/i386-io-windows.h: Added Windows port contributed by Alexander 1193 Stock <[email protected]>. 1194 1195 * lib/configure: Hopefully fixed SunOS port broken by various 1196 changes to the configure script. 1197 1198 * Makefile, lib/configure: Cross-compilation support, patch by Maciej. 1199 12002004-05-28 Martin Mares <[email protected]> 1201 1202 * Released as 2.1.99-test4. 1203 1204 * lspci.c (show_verbose): Header type 1 is probably legal for all 1205 types of bridges, not only for PCI-to-PCI bridges. 1206 1207 * lspci.c (format_agp_rate): Write "x16", not "x@". 1208 (show_agp): rate[] could overflow. 1209 Bugs reported by Jakub Bogusz <[email protected]>. 1210 1211 * lspci.c (show_ht_*): Show HyperTransport capability with all its 1212 details. Once again code by Maciej simplified (i.e., possibly broken) 1213 by me. 1214 1215 * lib/header.h: Added declarations of HyperTransport capability. 1216 Again thanks to Maciej. 1217 1218 * lspci.c: Decode all bits of the secondary status word in type 1 headers. 1219 Thanks to Maciej W. Rozycki <[email protected]> for the patch. 1220 12212003-12-27 Martin Mares <[email protected]> 1222 1223 * Released as 2.1.99-test3. 1224 1225 * lspci.man, setpci.man: Document domains and correct spelling. 1226 1227 * lib/dump.c (dump_init): Added ability to read domain numbers. 1228 1229 * lspci.c: Devices in domains different from 0 have their slot number 1230 printed as "<domain>:<bus>:<slot>.<func>". Tree view supports domains 1231 as well. 1232 1233 * lib/filter.c: Slot filters understand domains. 1234 1235 * lib/generic.c: Mention the domain in slot numbers in all error messages. 1236 1237 * lib/internal.h: The #ifdef for Linux <asm/byteorder.h> was wrong. 1238 1239 * lib/access.c (pci_get_dev): Added support for domains. 1240 1241 * lib/sysfs.c (sysfs_scan): Read vendor and device ID from the config 1242 registers (or to be precise, leave it for the generic parts of the pcilib 1243 to do so) instead of reading them from the sysfs. It's faster this way. 1244 1245 * lspci.c (show_pcix): Don't touch pci_dev->hdrtype, it's an internal 1246 variable. Better read it from the config registers (it's cached anyway). 1247 1248 * lib/sysfs.c (sysfs_scan), lib/proc.c (proc_scan): Don't read the hdrtype. 1249 lib/generic.c (pci_generic_fill_info): If hdrtype is -1 (unset), read it. 1250 Saves lots of unnecessary file accesses. 1251 1252 * lib/pci.h (PCIADDR_PORT_FMT): Use %llx instead of %Lx, because the latter 1253 is not supported by all C libraries. 1254 1255 * Makefile: Always enter the lib directory (remember that we don't have 1256 full dependecies for the library in the top-level Makefile; hmmm, another 1257 thing to rewrite some day). 1258 1259 * lib/sysfs.c: Added Linux sysfs access method based on the patch 1260 written by Matthew Wilcox <[email protected]>. 1261 1262 * lib/proc.c: Renamed the access method name from "/proc/bus/pci" to "Linux-proc". 1263 1264 * lib/pread.h: The hacks to support pread on various versions 1265 of Linux libc moved there. 1266 1267 * lib/proc.c (proc_setup): The return value of snprintf() varies 1268 between glibc versions, so we need to check both for a negative 1269 values and for too large values. 1270 1271 * Removed last few references to the "Linux PCI Utilities", the 1272 package is pretty cross-platform now :) 1273 12742003-12-27 Martin Mares <[email protected]> 1275 1276 * Released as 2.1.99-test2. 1277 1278 * README, pciutils.lsm, pciutils.spec: Use @VERSION@ to make the 1279 release scripts insert the current version. "make release" is gone. 1280 1281 * maint/release, maint/release.pm: Added a new system of scripts for 1282 making releases including inter-version diffs etc. 1283 1284 * Makefile: Cleaned up. 1285 1286 * lib/fbsd-device.c: I patched another copy of this file by mistake, 1287 this time the version checks should be right. 1288 12892003-12-27 Martin Mares <[email protected]> 1290 1291 * Released as 2.1.99-test1. 1292 1293 * pciutils.h, common.c, lspci.man, setpci.man, lib/internal.h: 1294 Remove shadows of the syscall access method which was never 1295 implemented. 1296 1297 * update-pciids.sh: Try to preserve permissions of the old file 1298 if chmod supports --reference. Should close Debian Bug #223740. 1299 1300 * lib/proc.c (proc_setup): Increased path name length limit to 1024. 1301 Thanks for Redhat and Mandrake for inspiration. 1302 1303 * lib/configure: Recognize ppc and ppc64, both have 64-bit addresses. 1304 Grabbed from Redhat (Fedora) patches. 1305 13062003-12-27 Martin Mares <[email protected]> 1307 1308 Merged bug fixes from Debian patches: 1309 1310 * lspci.c (show_verbose): "Cache Line Size" should be capitalized. 1311 1312 * lspci.c (show_pcix_nobridge): Added a missing newline. 1313 1314 * lib/proc.c (proc_scan): When reading the header type, don't 1315 forget to clear the topmost bit indicating that the device has 1316 multiple functions. 1317 13182003-12-27 Martin Mares <[email protected]> 1319 1320 Updated the FreeBSD port. Thanks to Samy Al Bahra <[email protected]> 1321 for the patches: 1322 1323 * lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined. 1324 * lib/fbsd-device.c: Select the right set of system includes according 1325 to __FreeBSD_version. 1326 13272003-12-27 Martin Mares <[email protected]> 1328 1329 Merged support for Solaris on i386 by Bill Moore <[email protected]> 1330 and cleaned up: 1331 1332 * lib/configure: Recognize SunOS. 1333 * lib/internal.h: Learn how to recognize byte order on SunOS. 1334 * lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c. 1335 * lib/i386-io-linux.h: Linux specific part. 1336 * lib/i386-io-hurd.h: GNU/Hurd specific part. 1337 * lib/i386-io-sunos.h: SunOS specific part. 1338 13392003-12-26 Martin Mares <[email protected]> 1340 1341 * lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly. 1342 1343 * lib/pci.h: Types declared in <sys/types.h> should be usable on all 1344 platforms we currently support, so kill the forest of #ifdef's and 1345 use them in all cases. 1346 1347 * lib/pci.h: Use ULONG_MASK to decide whether we should use long 1348 or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS. 1349 Define format strings for addresses, port numbers and IRQ numbers 1350 directly in pci.h. 1351 1352 * lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses. 1353 13542003-12-26 Marco Gerards <[email protected]> 1355 1356 Added support for the GNU Hurd (cleaned up by Martin Mares): 1357 1358 * lib/configure [GNU]: Use the i386 ports for configuration access. 1359 * lib/i386-ports.c: Don't call iopl() on the Hurd. 1360 * lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining 1361 u8 to u32. 1362 13632003-12-26 Martin Mares <[email protected]> 1364 1365 * lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call 1366 config_fetch() to ensure that the registers have been read. Thanks to 1367 Bill Wood <[email protected]> for the patch. 1368 1369 * lspci.c: Ensure that failure of config_fetch() is handled correctly 1370 at all places. 1371 1372 * lspci.man: There was one more explicit reference to /usr/share/pci.ids. 1373 Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <[email protected]>. 1374 1375 * setpci.c (main): Better error messages. 1376 1377 * setpci.c (ex_op): The demo mode should disable only writing, not reading. 1378 1379 * setpci.man: The documentation was inconsistent on what should -D do. 1380 Document the new behaviour. 1381 1382 * pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating 1383 the GCC specific __attribute__((noreturn)) and killed the hack with 1384 redefining __attribute__ on non-GCC compilers. 1385 1386 * Makefile: Added missing dependencies. Parallel builds work now. 1387 Problem reported by Andreas Haumer <[email protected]>, but I chose 1388 a different fix. 1389 1390 * Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell 1391 command every time $(MANDIR) is referenced. 1392 1393 * lspci.c (main): The error message for `lspci -s' incorrectly mentioned 1394 a `-f' switch. Reported by Steve Finney <[email protected]>. 1395 1396 * lib/generic.c: Removed memory leak in pci_generic_bus_scan(). 1397 Reported by Gary Parnes <[email protected]>. 1398 1399 * Replaced obsolete syntax of __attribute__((unused)) in the middle of 1400 parameter declarations (which is no longer supported by GCC 3.1) by the 1401 current syntax (attribute at the end). Thanks to [email protected] 1402 for reporting this problem. 1403 1404 * Removed CVS $Id$ tags from all files. 1405 1406 * Makefile: Added some more warnings. 1407 1408 * setpci.c: Cleaned up mask/value code. 1409 14102003-12-08 Thayne Harbaugh <[email protected]> 1411 1412 * setpci.c: Individual bits to be set can be specified as <value>:<mask>. 1413 14142003-11-29 Martin Mares <[email protected]> 1415 1416 * Imported the pciutils sources to my Arch repository. Good-bye, CVS. 1417 14182003-01-04 Martin Mares <[email protected]> 1419 1420 * Released as 2.1.11. 1421 1422 * Makefile: Changed configuration of installation directories -- 1423 all paths are now set at the top of the Makefile instead of being 1424 scattered between the installation rules. The default installation 1425 now goes always to /usr/local regardless of the OS as most distributions 1426 already contain some version of pciutils and we don't want custom 1427 installations to interfere with the default ones. 1428 1429 * Makefile: Removed a couple of ancient install hacks: we no longer 1430 try to avoid overwriting a newer pci.ids file (users are now expected 1431 to use update-ids) and we don't try to remove /etc/pci.ids (a long time 1432 has passed since the last version which used it). 1433 1434 * Makefile: Paths to pci.ids in man pages automatically get the right path. 1435 1436 * Added the update-ids utility. 1437 1438 * lib: Removed partially implemented "syscall" access method which will 1439 probably never be needed. 1440 14412002-12-27 Martin Mares <[email protected]> 1442 1443 * lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe. 1444 1445 * lib/generic.c (pci_generic_scan_bus): Added work-around for devices with 1446 discontiguous numbering of functions. This is already present in the Linux 1447 kernel for several years, but I forgot to update pciutils as well. 1448 14492002-12-26 Martin Mares <[email protected]> 1450 1451 * lib/header.h, lspci.c: Dump AGP3 flags and speeds. 1452 1453 * lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header, 1454 there is no reason to prefer the kernel version. 1455 1456 * lib/proc.c (proc_scan): Don't forget to initialize hdrtype. 1457 1458 * Added preliminary version of NetBSD support by Quentin Garnier 1459 <[email protected]>. 1460 14612002-04-06 Martin Mares <[email protected]> 1462 1463 * lspci.c: Mention "-xxx" in the help. 1464 14652002-03-30 Martin Mares <[email protected]> 1466 1467 * Released as 2.1.10. 1468 1469 * Removed pci.ids from the CVS as they are now maintained separately. 1470 They are still included in the tarball, but if you are building pciutils 1471 from CVS sources or you want to get a newer ID file than the one distributed, 1472 just use "make update-ids" to download the most recent snapshot from 1473 pciids.sf.net. 1474 1475 * Makefile, README: Updated accordingly. 1476 1477 * Makefile: Added a couple of maintenance targets. 1478 1479 * maint/*: Maintainer's utilities now reside here (present only in CVS, 1480 not in the tarball). 1481 1482 * lib/names.c (parse_name_list): End-of-line comments are no longer 1483 supported. Hashes are now perfectly valid in all names and they start 1484 a comment only at the start of the line. 1485 14862002-03-26 Martin Mares <[email protected]> 1487 1488 * README: Rewritten. 1489 1490 * Makefile: When the currently installed pci.ids file is newer than 1491 the version to be installed, don't overwrite it. Suggested by 1492 Jean Delvare <[email protected]>. 1493 14942002-03-24 Martin Mares <[email protected]> 1495 1496 * lspci.c (show_pcix_bridge): Added PCI-X capability display. 1497 Contributed by Jeff Garzik <[email protected]>. 1498 1499 * lib/header.h: Added PCI-X stuff. Again by Jeff. 1500 1501 * Makefile (CFLAGS): -Werror is gone. 1502 1503 * lspci.c (format_agp_rate): Fixed AGP rate reporting. 1504 1505 * lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and 1506 function 7. 1507 1508 * lib/names.c (pci_lookup_name): When printing unknown subsystem vendor 1509 or device hexadecimally, don't confuse it with chip vendor/device ID. 1510 First reported by Marc Boucher <[email protected]>. 1511 15122001-11-04 Martin Mares <[email protected]> 1513 1514 * Released as 2.1.9. 1515 1516 * pci.ids: Synced with the PCI ID Repository at SourceForge 1517 (http://pciids.sourceforge.net/). 1518 15192000-08-25 Martin Mares <[email protected]> 1520 1521 * pci.ids: Updated ID's, synced with kernel 2.4.0-test7. 1522 15232000-06-13 Martin Mares <[email protected]> 1524 1525 * Makefile (uninstall): Fixed. 1526 1527 * pci.ids: ID updates. 1528 15292000-05-20 Martin Mares <[email protected]> 1530 1531 * Released as 2.1.8. 1532 1533 * pci.ids: ID updates. 1534 1535 * lspci.c (show_verbose): Min/max latency is now printed in nanoseconds. 1536 15372000-05-04 Martin Mares <[email protected]> 1538 1539 * lspci.c (show_verbose): If the header type doesn't match device 1540 class, just print a warning and still use the header type, assuming 1541 bogus class info. 1542 15432000-05-01 Martin Mares <[email protected]> 1544 1545 * lspci.c (show_pm): Updated according to PCI PM specs 1.1. 1546 1547 * pci.ids: Updated Contemporary Control ARCnet card entries. 1548 1549 * pci.ids: Synchronized class list with latest PCI SIG documents. 1550 15512000-04-29 Martin Mares <[email protected]> 1552 1553 * lib/names.c (pci_lookup_name): Fixed the cheat. 1554 1555 * lib/internal.h: Moved UNUSED/inline hacks above all other declarations. 1556 1557 * pci.ids: Various ID updates. 1558 15592000-04-21 Martin Mares <[email protected]> 1560 1561 * Released as 2.1.7. 1562 1563 * pciutils.spec: Added German description. 1564 1565 * lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's 1566 are the same as device ID and just output subsystem name according to 1567 device name. 1568 1569 * lib/proc.c: Use UNUSED instead of __attribute__((unused)). 1570 1571 * lib/pci.h: Added the correct typedefs for AIX. 1572 1573 * lib/generic.c (pci_generic_scan_bus): Export. 1574 1575 * lib/configure: Detect AIX. Use "echo '...\c'" instead of 1576 "echo -n" if the shell isn't bash. 1577 1578 * lspci.c: Avoid using alloca() if not compiled by GCC. 1579 (insert_dev): Avoid returning a void value. 1580 1581 * Makefile: Choose which install utility to use according to 1582 OS type. Also use `-o' instead of `-or' in find arguments. 1583 Part of the AIX port. 1584 1585 * lib/aix-device.c: Added AIX low-level interface. Contributed 1586 by Dave Johnson <[email protected]>, thanks a lot! 1587 1588 * pci.ids: Few new ID's. 1589 1590 * pciutils.h, lib/internal.h: Redefine __attribute__ and inline 1591 when not compiled by GCC. 1592 15932000-04-17 Martin Mares <[email protected]> 1594 1595 * Released as 2.1.6. 1596 1597 * pci.ids: Added a large batch of ID's contributed by Gunther 1598 Mayer <[email protected]> and synced the 1599 list with the 2.3.99pre6 kernel. 1600 1601Thu Mar 9 13:11:39 2000 Martin Mares <[email protected]> 1602 1603 * lib/example.c: Added a simple example of how to use 1604 the library. 1605 1606 * lspci.man, setpci.man: Revealed --version. Well spotted 1607 by Adam Sulmicki. 1608 1609 * pci.ids: Added lots of new ID's and synced with 2.3.50. 1610 1611Tue Feb 15 00:16:21 2000 Martin Mares <[email protected]> 1612 1613 * Released as 2.1.5. 1614 1615 * pciutils.spec: Updated spec file from Andreas Jaeger. Now using 1616 %{_mandir} to find the right location to install manual pages to. 1617 1618 * pci.ids: New ID's. 1619 1620 * setpci.c (main): Don't crash when `-s' or `-d' is given with 1621 no argument. 1622 1623Mon Jan 24 20:04:11 2000 Andreas Jaeger <[email protected]> 1624 1625 * lib/i386-ports.c: Include <asm/io.h> only on systems without 1626 glibc. 1627 1628Mon Jan 24 11:24:43 2000 Martin Mares <[email protected]> 1629 1630 * Makefile: Modified to work with the Linux FHS brain-damaged idea 1631 of putting man pages to /usr/share/man. Now we choose either /usr/man 1632 or /usr/share/man depending on which one exists. 1633 1634Sun Jan 23 10:52:34 2000 Martin Mares <[email protected]> 1635 1636 * pci.ids: Synced with Linux 2.3.40. 1637 1638 * Released as version 2.1.4. 1639 1640Thu Jan 20 11:08:32 2000 Martin Mares <[email protected]> 1641 1642 * lspci.c (scan_device): Fixed bug in reading of cardbus extensions. 1643 1644 * lib/proc.c: pread/pwrite fixed again, this time on libc5 :( 1645 1646 * lspci.c (format_agp_rate): Better formatting of AGP rates. 1647 1648 * pci.ids: New ID's. 1649 1650 * lib/configure: Added configuration for ia64 (the same as for Alpha). 1651 Patch from Stephane Eranian <[email protected]>. 1652 1653Thu Jan 13 23:01:52 2000 Martin Mares <[email protected]> 1654 1655 * Released as version 2.1.3. 1656 1657 * pci.ids: New ID's. 1658 1659 * lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli. 1660 1661 * lib/access.c: Corrected order of access methods -- it's wonderful how 1662 long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff. 1663 1664Sat Dec 11 23:34:48 1999 Martin Mares <[email protected]> 1665 1666 * Released as version 2.1.2. 1667 1668 * lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's. 1669 1670Sat Dec 4 13:11:03 1999 Martin Mares <[email protected]> 1671 1672 * Released as version 2.1.1. 1673 1674 * pci.ids: Several new ID's. 1675 1676 * setpci.c (exec_op): Don't forget to increment address after writing 1677 single value, so that `30.b=12,34,56,78' works as expected. Reported 1678 by Petr Soucek <[email protected]>. 1679 1680Wed Nov 3 10:24:38 1999 Martin Mares <[email protected]> 1681 1682 * lspci.c (show_terse): If prog-if is zero, but it's present in the 1683 ID list, show it. 1684 1685Sat Oct 30 11:06:35 1999 Martin Mares <[email protected]> 1686 1687 * Released as version 2.1. 1688 1689 * pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in 1690 lots of contributed entries. 1691 1692Thu Oct 14 10:40:12 1999 Dave Jones <[email protected]> 1693 1694 * pci.ids: Added lots of subsystem definitions. 1695 1696Sat Oct 9 14:32:28 1999 Martin Mares <[email protected]> 1697 1698 * setpci.man: Better example. 1699 1700 * lspci.c: Resolve prog-if names. 1701 1702 * lib/names.c: Adapted to new pci.ids syntax. 1703 1704 * pci.ids: Reorganized the pci.ids file. Subsystems are listed 1705 under devices, classes can optionally contain prog-if information. 1706 New ID's, as usually. 1707 1708Wed Sep 22 09:45:24 1999 Martin Mares <[email protected]> 1709 1710 * pci.ids: New ID's. As usually. 1711 1712 * lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows 1713 unless we're vvvery verbose. 1714 1715Mon Sep 20 11:22:54 1999 Martin Mares <[email protected]> 1716 1717 * lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line. 1718 1719Tue Sep 14 09:31:01 1999 Martin Mares <[email protected]> 1720 1721 * pci.ids: New ID's. Again. 1722 1723Thu Aug 5 17:45:42 1999 Martin Mares <[email protected]> 1724 1725 * lspci.c (show_size): Don't show size if it's zero (usually 1726 due to bus-centric mode being enabled). 1727 1728Tue Jul 20 13:25:09 1999 Martin Mares <[email protected]> 1729 1730 * lib/pci.h: Types are OS dependent. 1731 1732 * lib/internal.h: Byte order hacks are OS dependent. 1733 1734 * lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS. 1735 1736 * lib/Makefile, lib/access.c: Added fbsd-device target. 1737 1738 * pci.ids: Added an entry for PLX 9080 bridges with subsystem ID 1739 incorrectly set to device ID. 1740 1741 * README: Added a note that we support FreeBSD. 1742 1743 * Makefile (PREFIX, ROOT): Set it depending on the OS. 1744 (%.8): Grrr, BSD date is not able to convert date formats the same way 1745 as GNU date does. Use sed instead. 1746 (install): Use `-c' when calling install. 1747 1748 * lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed 1749 by Jari Kirma <[email protected]>. 1750 1751 * lib/proc.c: Rewrote the pread/pwrite things once again. Use pread 1752 and pwrite only when we are certain it's safe (i.e., glibc 2.1 1753 on all architectures or any libc on a i386 where we really know 1754 how to use syscalls directly). In all other cases, emulate it 1755 with lseek/read/write. 1756 1757 * pci.ids: Some more IDs. 1758 1759Mon Jul 19 14:10:36 1999 Martin Mares <[email protected]> 1760 1761 * pci.ids: Added IDs of parallel port controller cards as sent 1762 by Tim Waugh <[email protected]>. 1763 1764Wed Jul 7 00:55:48 1999 Martin Mares <[email protected]> 1765 1766 * lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS. 1767 1768 * lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and 1769 HAVE_LONG_ADDRESS. 1770 1771 * lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses 1772 are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS 1773 to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS 1774 and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS 1775 on Alpha. 1776 1777 * lspci.c (show_msi): Added dumping of the MSI capability. 1778 (show_slotid): The same for SlotID capability. 1779 (show_caps): Seperated capability dumping, because it should 1780 be used for both htype0 and htype1. Even PCI 2.2 doesn't mention 1781 layout of htype2, so I'm a bit unsure about it wrt capabilities 1782 -- they at least have to live somewhere else since address 0x34 1783 is already defined differently in htype2. 1784 1785 * lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2). 1786 (PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto. 1787 (PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2. 1788 1789 * lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers 1790 (required by the PCI 2.2 specs). 1791 1792Mon Jul 5 12:45:19 1999 Martin Mares <[email protected]> 1793 1794 * lspci.c (show_size): Added new function for dumping of region sizes. 1795 (show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled 1796 ROMs et cetera. 1797 1798 * lib/pci.h (struct pci_dev): known_fields moved to the public part 1799 of the structure. 1800 1801 * Added support for region sizes. Needs support in the kernel, because 1802 sizes have to be scanned before drivers initialize yourself. pci_fill_info() 1803 now returns a bitmask of what fields were really read. 1804 1805Mon Jun 28 18:37:51 1999 Dave Jones <[email protected]> 1806 1807 * Makefile: 1808 Added `uninstall' target - removes all traces of pciutils. 1809 * pci.ids: 1810 - Lots of cleanups in the ATI, S3, Adaptec vendors. 1811 - Changed Compaq QVision 1280/p definitions, as it's not possible 1812 to determine the revision from the device ID. 1813 - Same for the Tseng ET4000. 1814 The id's said I had a rev C, when it was actually a rev B. 1815 - Removed some unnecessary strings 1816 `PCI'. Unless it's an AGP card, it should be obvious that it's PCI. 1817 `Ethernet card'. This should be determined from config space. 1818 - Lots of other new vendors & devices 1819 - Other additional small cleanups. 1820 1821Mon Jun 21 22:11:10 1999 Martin Mares <[email protected]> 1822 1823 * lib/names.c (pci_lookup_name): When device ID lookup 1824 fails, return hexadecimal device ID instead of vendor ID. 1825 Well spotted by Axel Bodemann <[email protected]>, 1826 I've just extended the fix to subsystem ID's. 1827 1828Thu Jun 17 19:48:21 1999 Martin Mares <[email protected]> 1829 1830 * lspci.c (show_agp): Bug fix from Petr Vandrovec 1831 <[email protected]>. The command register was displayed 1832 incorrectly. 1833 1834Wed Jun 2 22:42:44 1999 Martin Mares <[email protected]> 1835 1836 * lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded 1837 numbers if not supplied by the libc. 1838 1839Wed May 19 13:24:39 1999 Martin Mares <[email protected]> 1840 1841 * Released the whole package as version 2.0. 1842 1843Fri May 14 22:42:02 1999 Martin Mares <[email protected]> 1844 1845 * pci.ids: Added several new ID's contributed by people 1846 on the linux-pci list. 1847 1848Mon Apr 19 15:21:08 1999 Jakub Jelinek <[email protected]> 1849 1850 * lspci.c: Display I/O addresses correctly on sparc64. 1851 * lib/header.h: Ditto. 1852 1853 * lib/configure: On sparc set HAVE_64BIT* as well, we want 1854 a binary which works on both 32bit and 64bit SPARCs. 1855 1856Sun Apr 18 21:14:58 1999 Martin Mares <[email protected]> 1857 1858 * lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob 1859 <[email protected]>. 1860 1861 * pci.ids: A lot of updates from Adam J. Richter <[email protected]>. 1862 1863Sun Feb 28 22:26:21 1999 Martin Mares <[email protected]> 1864 1865 * lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged 1866 as a multi-function device, because several single-function devices 1867 don't decode the function bits at all. 1868 1869Sun Feb 14 23:48:22 1999 Martin Mares <[email protected]> 1870 1871 * Makefile (install): Don't use "-o root -g root" for installation 1872 since it breaks on machines where programs are not installed by root. 1873 Reported by Richard Gooch <[email protected]> 1874 1875Tue Feb 9 15:54:39 1999 Martin Mares <[email protected]> 1876 1877 * lspci.c (show_bases): Use new address masking macros and pciaddr_t. 1878 1879 * lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit 1880 or 64-bit depending on CPU. 1881 1882 * lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks 1883 according to bus address width. 1884 1885Thu Jan 28 20:54:16 1999 Martin Mares <[email protected]> 1886 1887 * Released as 1.99.4. 1888 1889 * lspci.c: Capability list parser now recognizes both AGP 1890 registers and PCI Power Management registers (the latter 1891 is mainly guesswork based on DEC/Intel 21153 bridge specs 1892 since I don't have the PCI Power Management document). 1893 1894 * lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-' 1895 by FLAG macro. 1896 1897 * lspci.c: Added bridge checks to bus mapping code. 1898 1899Wed Jan 27 14:59:16 1999 Martin Mares <[email protected]> 1900 1901 * lspci.c: Implemented bus mapping mode (-M). 1902 1903 * lspci.c (scan_devices): Split to scan_devices() and scan_device(). 1904 (show): Split to show() and show_device(). 1905 1906 * lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO, 1907 set it to the real access method afterwards. 1908 1909Mon Jan 25 23:46:13 1999 Martin Mares <[email protected]> 1910 1911 * lib/generic.c (pci_generic_fill_info): If in buscentric mode, 1912 don't check PCI_COMMAND for I/O and memory enables. 1913 1914Mon Jan 25 21:28:49 1999 Martin Mares <[email protected]> 1915 1916 * Makefile: Added target `release' which substitutes new version 1917 number to .spec, .lsm and README. Also rewrote target `dist'. 1918 1919 * Released as 1.99.3. 1920 1921Sun Jan 24 22:10:36 1999 Martin Mares <[email protected]> 1922 1923 * lib/header.h: Until kernel adopts new layout of PCI 1924 includes (i.e., separate declaration of header structure, 1925 functions and device IDs), which is not going to happen 1926 before 2.3, we'll use our own definiton of the header. 1927 1928 * lspci.c (show_verbose): Display `Cap' flag in device status. 1929 1930 * lspci.c (show_htype0): Display capability lists whereever 1931 available. The only capability name we recognize now is `AGP'. 1932 Unfortunately, capabilities are stored in device-dependent 1933 portion of the configuration space and are thus available 1934 only to root unless you read a dump. 1935 1936 * lspci.c (scan_devices): Use cache instead of buffering. 1937 1938 * lib/buffer.c: Removed (obsoleted by the cache). 1939 1940 * lib/access.c: Added general caching mechanism. 1941 1942Sat Jan 23 21:30:54 1999 Martin Mares <[email protected]> 1943 1944 * pci.ids: Added few devices. 1945 1946Fri Jan 22 19:29:31 1999 Martin Mares <[email protected]> 1947 1948 * Version string is now defined in top-level Makefile, exported 1949 to the configure script and also substituted to man pages. 1950 1951 * lspci.c (show_bases): Rewrote displaying of 64-bit addresses. 1952 (show_verbose): Rewrote interrupt display logic. 1953 1954 * lib/i386-ports.c: Include sys/io.h only on glibc systems. 1955 1956 * lib/configure: Rewrote detection of Linux versions. Now it 1957 works on 2.0 kernels (only with direct/dump access, of course). 1958 1959 * lib/internal.h: New bytesex macros using <asm/byteorder.h> 1960 whenever available. 1961 1962 * lib/proc.c (proc_read, proc_write): Distinguish between short 1963 read/write and real errors. 1964 1965 * lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since 1966 libpci respects buscentric mode automatically. 1967 1968 * lspci.c (show_hex_dump): For CardBus bridges, print out 128 1969 bytes of header (the whole standard part). 1970 1971 * common.c: pcilib options are now all uppercase. Also moved 1972 PCI access debugging option here. 1973 1974 * Released as 1.99.2. 1975 1976Wed Jan 20 22:50:35 1999 Martin Mares <[email protected]> 1977 1978 * Wrote configure script and rewrote Makefiles. 1979 1980 * Removed few unused variables. 1981 1982Wed Jan 20 12:21:56 1999 Martin Mares <[email protected]> 1983 1984 * common.c: Moved several functions used in both setpci and lspci 1985 here. This includes parsing of libpci-related options. 1986 1987 * More library tweaks. 1988 1989 * filter.c, names.c: Moved to library. 1990 1991 * setpci: Rewritten to use the library. 1992 1993 * Released as 1.99.1. 1994 1995Tue Jan 19 23:00:12 1999 Martin Mares <[email protected]> 1996 1997 * lspci.c (scan_devices): For cardbus bridges, read first 128 1998 bytes of config space to get full standard header. 1999 2000 * Makefile (CFLAGS): Removed "-Wno-unused". 2001 2002 * Started the "New Generation" branch and introduced the 2003 PCI library. 2004 2005 * lspci: Rewritten to use the library. 2006 2007Tue Jan 19 22:24:08 1999 Martin Mares <[email protected]> 2008 2009 * Released as version 1.10. 2010 2011Mon Jan 18 08:51:17 1999 Martin Mares <[email protected]> 2012 2013 * lspci.8, setpci.8: Miscellaneous fixes as suggested by 2014 Dag Wieers <[email protected]>. 2015 2016Sun Nov 29 20:05:56 1998 Martin Mares <[email protected]> 2017 2018 * pciutils.spec (Name): Update from Krzysztof G. Baranowski. 2019 2020Sun Nov 22 10:49:56 1998 Martin Mares <[email protected]> 2021 2022 * Makefile, pciutils.h: Moved pci.ids to /usr/share. 2023 2024 * Released as version 1.09. 2025 2026Wed Nov 18 15:47:05 1998 Martin Mares <[email protected]> 2027 2028 * lspci.c (show_htype1): Fixed displaying of prefetchable memory behind 2029 bridge. Thanks to Petr Vandrovec <[email protected]> for bug report. 2030 2031Fri Oct 23 18:59:19 1998 Martin Mares <[email protected]> 2032 2033 * setpci.c: Don't include <syscall-list.h> with glibc >= 2.1. 2034 2035Mon Oct 19 21:53:30 1998 Martin Mares <[email protected]> 2036 2037 * Released as version 1.08. 2038 2039 * setpci.c: glibc 2.1.x already defines pread() and pwrite(). 2040 2041 * lspci.8: Changed warning about lspci -xxx. 2042 2043 * lspci.c: Require "-xxx" for full configuration space dump, so that 2044 it's impossible to crash the machine by single typo. 2045 2046 * specs: Added (courtesy of Krzysztof G. Baranowski <[email protected]>). 2047 2048Wed Sep 9 12:03:24 1998 Martin Mares <[email protected]> 2049 2050 * lspci.c (show_bases): Better displaying of unassigned and 2051 disabled bases. Thanks to Gabriel Paubert <[email protected]> 2052 for an idea. 2053 2054Wed Sep 2 10:58:01 1998 Martin Mares <[email protected]> 2055 2056 * setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC. 2057 (thanks to Geert Uytterhoeven for finding this out) 2058 2059Fri Jul 17 10:43:30 1998 Martin Mares <[email protected]> 2060 2061 * lspci.c (show_verbose): Print subsystem ID using the new resolver. 2062 (show_machine): Print subsystem ID. 2063 2064 * names.c: New name resolution engine supporting subsystem IDs. 2065 2066 * Released as version 1.07. 2067 2068Wed Jul 15 15:37:21 1998 Martin Mares <[email protected]> 2069 2070 * lspci.c (show_htype2 etc.): Displaying of CardBus headers. 2071 (show_bases): Honor the `cnt' argument. 2072 (grow_tree): Parse CardBus headers in tree mode as well. 2073 2074 * pci.h: Updated CardBus header field description. I still don't 2075 have the CardBus standard available, but OZ6832 specs contain 2076 full description of all header fields supported by the chip. 2077 2078Tue Jun 9 22:53:59 1998 Martin Mares <[email protected]> 2079 2080 * Released as 1.06. 2081 2082 * names.c (parse_name_list): Killed an unused variable. 2083 2084 * setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1 2085 if they are not defined by glibc (needed for glibc built on older 2086 kernels). Ugly. 2087 2088 * setpci.c (exec_op): Fixed error messages. Thanks, Steve! 2089 2090Mon Jun 8 10:59:22 1998 Martin Mares <[email protected]> 2091 2092 * Released as 1.05. 2093 2094 * setpci.c: Problems with pread()/pwrite() with glibc on Alpha 2095 should be gone. Again thanks to Steve for bug report. 2096 2097 * filter.c (filter_parse_slot): Fixed ":x" type filters. 2098 2099 * pci.ids: Killed duplicate entry. Thanks to Stephen Williams 2100 <[email protected]> for reporting this. 2101 2102Sun Jun 7 19:27:51 1998 Martin Mares <[email protected]> 2103 2104 * lspci.c (main), setpci.c (main): Implemented "--version". 2105 2106 * Released as 1.04. 2107 2108 * pciutils.h (PCIUTILS_VERSION): Added version string. 2109 2110 * filter.c, names.c: Extraneous #include <linux/pci.h> removed. 2111 Thanks to Geert Uytterhoeven <[email protected]> 2112 for bug report. 2113 2114Thu May 28 14:45:58 1998 Martin Mares <[email protected]> 2115 2116 * pci.ids: More updates from Jens Maurer. 2117 2118Wed Apr 22 10:00:39 1998 Martin Mares <[email protected]> 2119 2120 * pci.ids: Updates from Jens Maurer. 2121 2122Sun Apr 19 11:14:25 1998 Martin Mares <[email protected]> 2123 2124 * Released as 1.03. 2125 2126 * setpci.8: Written. 2127 2128 * setpci.c: Finished. 2129 2130 * lspci.c: Now able to fetch expansion ROM base from kernel device list 2131 and print it if not in buscentric mode. 2132 2133Tue Mar 31 23:11:57 1998 Martin Mares <[email protected]> 2134 2135 * setpci.c: Added. 2136 2137Sun Mar 22 15:39:08 1998 Martin Mares <[email protected]> 2138 2139 * lspci.8: Updated the documentation. 2140 2141 * lspci.c: Modified to use the new filtering mechanism (options -f and -d). 2142 2143 * filter.c: Introduced new generic device filter. 2144 2145Thu Mar 19 17:03:48 1998 Martin Mares <[email protected]> 2146 2147 * lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying 2148 of PCI-to-PCI bridges in the tree format. 2149 2150Sun Feb 15 10:12:25 1998 Martin Mares <[email protected]> 2151 2152 * lspci.c (show_machine): Added non-verbose mode of machine-readable 2153 dump. 2154 2155 * pci.ids: Updates from Jens Maurer. 2156 2157 * Released as version 1.02. 2158 2159Thu Feb 12 16:53:28 1998 Martin Mares <[email protected]> 2160 2161 * lspci.c: Added a "-m" switch for dumping machine-readable 2162 configuration data (requested by Bjoern Kriews <[email protected]>). 2163 2164Mon Feb 9 13:17:43 1998 Martin Mares <[email protected]> 2165 2166 * Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h> 2167 if available. This should avoid all problems with official kernel 2168 not synchronized to newer PCI code in CVS -- standard distribution 2169 of pciutils now contains pci.h from current CVS kernel, pciutils 2170 in CVS contain no pci.h and use the correct kernel include. 2171 2172 * Makefile: Fixed installation path for man pages. 2173 2174Sat Feb 7 15:15:46 1998 Martin Mares <[email protected]> 2175 2176 * README: Updated. 2177 2178 * lspci.8: Created a man page. 2179 2180 * Releasing as version 1.0. 2181 2182Tue Feb 3 20:56:00 1998 Martin Mares <[email protected]> 2183 2184 * Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx 2185 to all the C sources. This should eliminate problems with 32-bit compilers 2186 on sparc64. 2187 2188 * lspci.c (show_verbose): Recognize CardBus bridge header type. 2189 (show_htype2): Stub routine. 2190 (scan_config): Write sensible error message if the kernel denies reading of 2191 upper part of the PCI config space. 2192