xref: /pciutils/ChangeLog (revision 2240db8c)

2003-12-27  Martin Mares  <[email protected]>

	* lib/proc.c (proc_scan): When reading the header type, don't
	forget to clear the topmost bit indicating that the device has
	multiple functions. Grabbed from Debian patches.

2003-12-27  Martin Mares  <[email protected]>

	Updated the FreeBSD port. Thanks to Samy Al Bahra <[email protected]>
	for the patches:

	* lib/Makefile: Add ${FREEBSD_SYS} to the include path if it's defined.
	* lib/fbsd-device.c: Select the right set of system includes according
	to __FreeBSD_version.

2003-12-27  Martin Mares  <[email protected]>

	Merged support for Solaris on i386 by Bill Moore <[email protected]>
	and cleaned up:

	* lib/configure: Recognize SunOS.
	* lib/internal.h: Learn how to recognize byte order on SunOS.
	* lib/i386-ports.c: Split OS-dependent I/O port access from i386-ports.c.
	* lib/i386-io-linux.h: Linux specific part.
	* lib/i386-io-hurd.h: GNU/Hurd specific part.
	* lib/i386-io-sunos.h: SunOS specific part.

2003-12-26  Martin Mares  <[email protected]>

	* lib/header.h (PCI_*_MASK): Cast to pciaddr_t explicitly.

	* lib/pci.h: Types declared in <sys/types.h> should be usable on all
	platforms we currently support, so kill the forest of #ifdef's and
	use them in all cases.

	* lib/pci.h: Use ULONG_MASK to decide whether we should use long
	or long long to represent a 64-bit address. Killed HAVE_LONG_ADDRESS.
	Define format strings for addresses, port numbers and IRQ numbers
	directly in pci.h.

	* lib/proc.c (proc_scan): Use PCIADDR_T_FMT for scanf'ing addresses.

2003-12-26  Marco Gerards  <[email protected]>

	Added support for the GNU Hurd (cleaned up by Martin Mares):

	* lib/configure [GNU]: Use the i386 ports for configuration access.
	* lib/i386-ports.c: Don't call iopl() on the Hurd.
	* lib/pci.h [OS_GNU]: Include <sys/types.h> and use it for defining
	u8 to u32.

2003-12-26  Martin Mares  <[email protected]>

	* lspci.c (show_pcix_bridge, show_pcix_nobridge): Don't forget to call
	config_fetch() to ensure that the registers have been read. Thanks to
	Bill Wood <[email protected]> for the patch.

	* lspci.c: Ensure that failure of config_fetch() is handled correctly
	at all places.

	* lspci.man: There was one more explicit reference to /usr/share/pci.ids.
	Changed to @SHAREDIR@. Patch from Maciej W. Rozycki <[email protected]>.

	* setpci.c (main): Better error messages.

	* setpci.c (ex_op): The demo mode should disable only writing, not reading.

	* setpci.man: The documentation was inconsistent on what should -D do.
	Document the new behaviour.

	* pciutils.h, common.c, setpci.c: Introduced a NONRET macro encapsulating
	the GCC specific __attribute__((noreturn)) and killed the hack with
	redefining __attribute__ on non-GCC compilers.

	* Makefile: Added missing dependencies. Parallel builds work now.
	Problem reported by Andreas Haumer <[email protected]>, but I chose
	a different fix.

	* Makefile (MANDIR): Use `:=' instead of `=' to avoid executing the shell
	command every time $(MANDIR) is referenced.

	* lspci.c (main): The error message for `lspci -s' incorrectly mentioned
	a `-f' switch. Reported by Steve Finney <[email protected]>.

	* lib/generic.c: Removed memory leak in pci_generic_bus_scan().
	Reported by Gary Parnes <[email protected]>.

	* Replaced obsolete syntax of __attribute__((unused)) in the middle of
	parameter declarations (which is no longer supported by GCC 3.1) by the
	current syntax (attribute at the end). Thanks to [email protected]
	for reporting this problem.

	* Removed CVS $Id$ tags from all files.

	* Makefile: Added some more warnings.

	* setpci.c: Cleaned up mask/value code.

2003-12-08 Thayne Harbaugh <[email protected]>

	* setpci.c: Individual bits to be set can be specified as <value>:<mask>.

2003-11-29  Martin Mares  <[email protected]>

	* Imported the pciutils sources to my Arch repository. Good-bye, CVS.

2003-01-04  Martin Mares  <[email protected]>

	* Released as 2.1.11.

	* Makefile: Changed configuration of installation directories --
	all paths are now set at the top of the Makefile instead of being
	scattered between the installation rules. The default installation
	now goes always to /usr/local regardless of the OS as most distributions
	already contain some version of pciutils and we don't want custom
	installations to interfere with the default ones.

	* Makefile: Removed a couple of ancient install hacks: we no longer
	try to avoid overwriting a newer pci.ids file (users are now expected
	to use update-ids) and we don't try to remove /etc/pci.ids (a long time
	has passed since the last version which used it).

	* Makefile: Paths to pci.ids in man pages automatically get the right path.

	* Added the update-ids utility.

	* lib: Removed partially implemented "syscall" access method which will
	probably never be needed.

2002-12-27  Martin Mares  <[email protected]>

	* lib/nbsd-libpci.c: Cleaned up and hopefully made it endian safe.

	* lib/generic.c (pci_generic_scan_bus): Added work-around for devices with
	discontiguous numbering of functions. This is already present in the Linux
	kernel for several years, but I forgot to update pciutils as well.

2002-12-26  Martin Mares  <[email protected]>

	* lib/header.h, lspci.c: Dump AGP3 flags and speeds.

	* lib/pci.h, Makefile: Removed HAVE_OWN_HEADER_H. Always use our own header,
	there is no reason to prefer the kernel version.

	* lib/proc.c (proc_scan): Don't forget to initialize hdrtype.

	* Added preliminary version of NetBSD support by Quentin Garnier
	<[email protected]>.

2002-04-06  Martin Mares  <[email protected]>

	* lspci.c: Mention "-xxx" in the help.

2002-03-30  Martin Mares  <[email protected]>

	* Released as 2.1.10.

	* Removed pci.ids from the CVS as they are now maintained separately.
	They are still included in the tarball, but if you are building	pciutils
	from CVS sources or you want to get a newer ID file than the one distributed,
	just use "make update-ids" to download the most recent snapshot from
	pciids.sf.net.

	* Makefile, README: Updated accordingly.

	* Makefile: Added a couple of maintenance targets.

	* maint/*: Maintainer's utilities now reside here (present only in CVS,
	not in the tarball).

	* lib/names.c (parse_name_list): End-of-line comments are no longer
	supported. Hashes are now perfectly valid in all names and they start
	a comment only at the start of the line.

2002-03-26  Martin Mares  <[email protected]>

	* README: Rewritten.

	* Makefile: When the currently installed pci.ids file is newer than
	the version to be installed, don't overwrite it. Suggested by
	Jean Delvare <[email protected]>.

2002-03-24  Martin Mares  <[email protected]>

	* lspci.c (show_pcix_bridge): Added PCI-X capability display.
	Contributed by Jeff Garzik <[email protected]>.

	* lib/header.h: Added PCI-X stuff. Again by Jeff.

	* Makefile (CFLAGS): -Werror is gone.

	* lspci.c (format_agp_rate): Fixed AGP rate reporting.

	* lib/filter.c (pci_filter_parse_slot): Allow bus 0xff, slot 0x1f and
	function 7.

	* lib/names.c (pci_lookup_name): When printing unknown subsystem vendor
	or device hexadecimally, don't confuse it with chip vendor/device ID.
	First reported by Marc Boucher <[email protected]>.

2001-11-04  Martin Mares  <[email protected]>

	* Released as 2.1.9.

	* pci.ids: Synced with the PCI ID Repository at SourceForge
	(http://pciids.sourceforge.net/).

2000-08-25  Martin Mares  <[email protected]>

	* pci.ids: Updated ID's, synced with kernel 2.4.0-test7.

2000-06-13  Martin Mares  <[email protected]>

	* Makefile (uninstall): Fixed.

	* pci.ids: ID updates.

2000-05-20  Martin Mares  <[email protected]>

	* Released as 2.1.8.

	* pci.ids: ID updates.

	* lspci.c (show_verbose): Min/max latency is now printed in nanoseconds.

2000-05-04  Martin Mares  <[email protected]>

	* lspci.c (show_verbose): If the header type doesn't match device
	class, just print a warning and still use the header type, assuming
	bogus class info.

2000-05-01  Martin Mares  <[email protected]>

	* lspci.c (show_pm): Updated according to PCI PM specs 1.1.

	* pci.ids: Updated Contemporary Control ARCnet card entries.

	* pci.ids: Synchronized class list with latest PCI SIG documents.

2000-04-29  Martin Mares  <[email protected]>

	* lib/names.c (pci_lookup_name): Fixed the cheat.

	* lib/internal.h: Moved UNUSED/inline hacks above all other declarations.

	* pci.ids: Various ID updates.

2000-04-21  Martin Mares  <[email protected]>

	* Released as 2.1.7.

	* pciutils.spec: Added German description.

	* lib/names.c (pci_lookup_name): Added a cheat for case that subsystem ID's
	are the same as device ID and just output subsystem name according to
	device name.

	* lib/proc.c: Use UNUSED instead of __attribute__((unused)).

	* lib/pci.h: Added the correct typedefs for AIX.

	* lib/generic.c (pci_generic_scan_bus): Export.

	* lib/configure: Detect AIX. Use "echo '...\c'" instead of
	"echo -n" if the shell isn't bash.

	* lspci.c: Avoid using alloca() if not compiled by GCC.
	(insert_dev): Avoid returning a void value.

	* Makefile: Choose which install utility to use according to
	OS type. Also use `-o' instead of `-or' in find arguments.
	Part of the AIX port.

	* lib/aix-device.c: Added AIX low-level interface. Contributed
	by Dave Johnson <[email protected]>, thanks a lot!

	* pci.ids: Few new ID's.

	* pciutils.h, lib/internal.h: Redefine __attribute__ and inline
	when not compiled by GCC.

2000-04-17  Martin Mares  <[email protected]>

	* Released as 2.1.6.

	* pci.ids: Added a large batch of ID's contributed by Gunther
	Mayer <[email protected]> and synced the
	list with the 2.3.99pre6 kernel.

Thu Mar  9 13:11:39 2000  Martin Mares  <[email protected]>

	* lib/example.c: Added a simple example of how to use
	the library.

	* lspci.man, setpci.man: Revealed --version. Well spotted
	by Adam Sulmicki.

	* pci.ids: Added lots of new ID's and synced with 2.3.50.

Tue Feb 15 00:16:21 2000  Martin Mares  <[email protected]>

	* Released as 2.1.5.

	* pciutils.spec: Updated spec file from Andreas Jaeger. Now using
	%{_mandir} to find the right location to install manual pages to.

	* pci.ids: New ID's.

	* setpci.c (main): Don't crash when `-s' or `-d' is given with
	no argument.

Mon Jan 24 20:04:11 2000  Andreas Jaeger  <[email protected]>

	* lib/i386-ports.c: Include <asm/io.h> only on systems without
	glibc.

Mon Jan 24 11:24:43 2000  Martin Mares  <[email protected]>

	* Makefile: Modified to work with the Linux FHS brain-damaged idea
	of putting man pages to /usr/share/man. Now we choose either /usr/man
	or /usr/share/man depending on which one exists.

Sun Jan 23 10:52:34 2000  Martin Mares  <[email protected]>

	* pci.ids: Synced with Linux 2.3.40.

	* Released as version 2.1.4.

Thu Jan 20 11:08:32 2000  Martin Mares  <[email protected]>

	* lspci.c (scan_device): Fixed bug in reading of cardbus extensions.

	* lib/proc.c: pread/pwrite fixed again, this time on libc5 :(

	* lspci.c (format_agp_rate): Better formatting of AGP rates.

	* pci.ids: New ID's.

	* lib/configure: Added configuration for ia64 (the same as for Alpha).
	Patch from Stephane Eranian <[email protected]>.

Thu Jan 13 23:01:52 2000  Martin Mares  <[email protected]>

	* Released as version 2.1.3.

	* pci.ids: New ID's.

	* lspci.c: Alpha IO_FORMAT fix by Andrea Arcangeli.

	* lib/access.c: Corrected order of access methods -- it's wonderful how
	long could such a bug remain unspotted. Thanks go to Andreas Schockenhoff.

Sat Dec 11 23:34:48 1999  Martin Mares  <[email protected]>

	* Released as version 2.1.2.

	* lib/names.c (pci_lookup_name): Fixed printing of unknown subsystem ID's.

Sat Dec  4 13:11:03 1999  Martin Mares  <[email protected]>

	* Released as version 2.1.1.

	* pci.ids: Several new ID's.

	* setpci.c (exec_op): Don't forget to increment address after writing
	single value, so that `30.b=12,34,56,78' works as expected. Reported
	by Petr Soucek <[email protected]>.

Wed Nov  3 10:24:38 1999  Martin Mares  <[email protected]>

	* lspci.c (show_terse): If prog-if is zero, but it's present in the
	ID list, show it.

Sat Oct 30 11:06:35 1999  Martin Mares  <[email protected]>

	* Released as version 2.1.

	* pci.ids: Synced to devlist.h in 2.3.24 kernel. Merged in
	lots of contributed entries.

Thu Oct 14 10:40:12 1999  Dave Jones    <[email protected]>

	* pci.ids: Added lots of subsystem definitions.

Sat Oct  9 14:32:28 1999  Martin Mares  <[email protected]>

	* setpci.man: Better example.

	* lspci.c: Resolve prog-if names.

	* lib/names.c: Adapted to new pci.ids syntax.

	* pci.ids: Reorganized the pci.ids file. Subsystems are listed
	under devices, classes can optionally contain prog-if information.
	New ID's, as usually.

Wed Sep 22 09:45:24 1999  Martin Mares  <[email protected]>

	* pci.ids: New ID's. As usually.

	* lspci.c (show_htype1, show_htype2): Don't show `closed' bridge windows
	unless we're vvvery verbose.

Mon Sep 20 11:22:54 1999  Martin Mares  <[email protected]>

	* lspci.c (show_htype2): Don't forget a TAB before the "I/O window" line.

Tue Sep 14 09:31:01 1999  Martin Mares  <[email protected]>

	* pci.ids: New ID's. Again.

Thu Aug  5 17:45:42 1999  Martin Mares  <[email protected]>

	* lspci.c (show_size): Don't show size if it's zero (usually
	due to bus-centric mode being enabled).

Tue Jul 20 13:25:09 1999  Martin Mares  <[email protected]>

	* lib/pci.h: Types are OS dependent.

	* lib/internal.h: Byte order hacks are OS dependent.

	* lib/configure: Recognize FreeBSD. Also set OS_XXX according to the OS.

	* lib/Makefile, lib/access.c: Added fbsd-device target.

	* pci.ids: Added an entry for PLX 9080 bridges with subsystem ID
	incorrectly set to device ID.

	* README: Added a note that we support FreeBSD.

	* Makefile (PREFIX, ROOT): Set it depending on the OS.
	(%.8): Grrr, BSD date is not able to convert date formats the same way
	as GNU date does. Use sed instead.
	(install): Use `-c' when calling install.

	* lib/fbsd-device.c: Added FreeBSD /dev/pci access module contributed
	by Jari Kirma <[email protected]>.

	* lib/proc.c: Rewrote the pread/pwrite things once again. Use pread
	and pwrite only when we are certain it's safe (i.e., glibc 2.1
	on all architectures or any libc on a i386 where we really know
	how to use syscalls directly). In all other cases, emulate it
	with lseek/read/write.

	* pci.ids: Some more IDs.

Mon Jul 19 14:10:36 1999  Martin Mares  <[email protected]>

	* pci.ids: Added IDs of parallel port controller cards as sent
	by Tim Waugh <[email protected]>.

Wed Jul  7 00:55:48 1999  Martin Mares  <[email protected]>

	* lib/proc.c (proc_scan): HAVE_LONG_ADDRESS instead of HAVE_64BIT_ADDRESS.

	* lspci.c: ADDR_FORMAT now depends on both HAVE_64BIT_ADDRESS and
	HAVE_LONG_ADDRESS.

	* lib/configure: HAVE_64BIT_ADDRESS now doesn't imply that the addresses
	are represented as long long. Introduced a new flag HAVE_LONG_ADDRESS
	to indicate this. Both Sparc architectures now use both 64BIT_ADDRESS
	and LONG_ADDRESS since they have 32-bit userland, but don't set LONG_ADDRESS
	on Alpha.

	* lspci.c (show_msi): Added dumping of the MSI capability.
	(show_slotid): The same for SlotID capability.
	(show_caps): Seperated capability dumping, because it should
	be used for both htype0 and htype1. Even PCI 2.2 doesn't mention
	layout of htype2, so I'm a bit unsure about it wrt capabilities
	-- they at least have to live somewhere else since address 0x34
	is already defined differently in htype2.

	* lib/header.h (PCI_STATUS_UDF): Marked as obsolete (PCI 2.2).
	(PCI_BASE_ADDRESS_MEM_TYPE_1M): Ditto.
	(PCI_CAP_ID_*): Added some new capabilities defined in PCI 2.2.

	* lspci.c (show_htype0): Mask out lowest 2 bits from all capability pointers
	(required by the PCI 2.2 specs).

Mon Jul  5 12:45:19 1999  Martin Mares  <[email protected]>

	* lspci.c (show_size): Added new function for dumping of region sizes.
	(show_rom): Added. Now correctly dumps unassigned ROM addresses, disabled
	ROMs et cetera.

	* lib/pci.h (struct pci_dev): known_fields moved to the public part
	of the structure.

	* Added support for region sizes. Needs support in the kernel, because
	sizes have to be scanned before drivers initialize yourself. pci_fill_info()
	now returns a bitmask of what fields were really read.

Mon Jun 28 18:37:51 1999  Dave Jones    <[email protected]>

	* Makefile:
	  Added `uninstall' target - removes all traces of pciutils.
	* pci.ids:
	  - Lots of cleanups in the ATI, S3, Adaptec vendors.
	  - Changed Compaq QVision 1280/p definitions, as it's not possible
	    to determine the revision from the device ID.
	  - Same for the Tseng ET4000.
	    The id's said I had a rev C, when it was actually a rev B.
	  - Removed some unnecessary strings
	    `PCI'. Unless it's an AGP card, it should be obvious that it's PCI.
	    `Ethernet card'. This should be determined from config space.
	  - Lots of other new vendors & devices
	  - Other additional small cleanups.

Mon Jun 21 22:11:10 1999  Martin Mares  <[email protected]>

	* lib/names.c (pci_lookup_name): When device ID lookup
	fails, return hexadecimal device ID instead of vendor ID.
	Well spotted by Axel Bodemann <[email protected]>,
	I've just extended the fix to subsystem ID's.

Thu Jun 17 19:48:21 1999  Martin Mares  <[email protected]>

	* lspci.c (show_agp): Bug fix from Petr Vandrovec
	<[email protected]>. The command register was displayed
	incorrectly.

Wed Jun  2 22:42:44 1999  Martin Mares  <[email protected]>

	* lib/proc.c (SYS_pread, SYS_pwrite): Use hard-coded
	numbers if not supplied by the libc.

Wed May 19 13:24:39 1999  Martin Mares  <[email protected]>

	* Released the whole package as version 2.0.

Fri May 14 22:42:02 1999  Martin Mares  <[email protected]>

	* pci.ids: Added several new ID's contributed by people
	on the linux-pci list.

Mon Apr 19 15:21:08 1999  Jakub Jelinek  <[email protected]>

	* lspci.c: Display I/O addresses correctly on sparc64.
	* lib/header.h: Ditto.

	* lib/configure: On sparc set HAVE_64BIT* as well, we want
	a binary which works on both 32bit and 64bit SPARCs.

Sun Apr 18 21:14:58 1999  Martin Mares  <[email protected]>

	* lspci.c, lib/proc.c: Alpha compilation fixes from Matthew Jacob
	<[email protected]>.

	* pci.ids: A lot of updates from Adam J. Richter <[email protected]>.

Sun Feb 28 22:26:21 1999  Martin Mares  <[email protected]>

	* lspci.c (do_map_bus): Don't dump functions 1--7 if not flagged
	as a multi-function device, because several single-function devices
	don't decode the function bits at all.

Sun Feb 14 23:48:22 1999  Martin Mares  <[email protected]>

	* Makefile (install): Don't use "-o root -g root" for installation
	since it breaks on machines where programs are not installed by root.
	Reported by Richard Gooch <[email protected]>

Tue Feb  9 15:54:39 1999  Martin Mares  <[email protected]>

	* lspci.c (show_bases): Use new address masking macros and pciaddr_t.

	* lib/pci.h: Using pciaddr_t for bus addresses, which are 32-bit
	or 64-bit depending on CPU.

	* lib/pci.h (PCI_ADDR_MEM_MASK): Added macros for address masks
	according to bus address width.

Thu Jan 28 20:54:16 1999  Martin Mares  <[email protected]>

	* Released as 1.99.4.

	* lspci.c: Capability list parser now recognizes both AGP
	registers and PCI Power Management registers (the latter
	is mainly guesswork based on DEC/Intel 21153 bridge specs
	since I don't have the PCI Power Management document).

	* lspci.c: Replaced numerous occurences of (x & flag) ? '+' : '-'
	by FLAG macro.

	* lspci.c: Added bridge checks to bus mapping code.

Wed Jan 27 14:59:16 1999  Martin Mares  <[email protected]>

	* lspci.c: Implemented bus mapping mode (-M).

	* lspci.c (scan_devices): Split to scan_devices() and scan_device().
	(show): Split to show() and show_device().

	* lib/access.c (pci_init): When a->method == PCI_ACCESS_AUTO,
	set it to the real access method afterwards.

Mon Jan 25 23:46:13 1999  Martin Mares  <[email protected]>

	* lib/generic.c (pci_generic_fill_info): If in buscentric mode,
	don't check PCI_COMMAND for I/O and memory enables.

Mon Jan 25 21:28:49 1999  Martin Mares  <[email protected]>

	* Makefile: Added target `release' which substitutes new version
	number to .spec, .lsm and README. Also rewrote target `dist'.

	* Released as 1.99.3.

Sun Jan 24 22:10:36 1999  Martin Mares  <[email protected]>

	* lib/header.h: Until kernel adopts new layout of PCI
	includes (i.e., separate declaration of header structure,
	functions and device IDs), which is not going to happen
	before 2.3, we'll use our own definiton of the header.

	* lspci.c (show_verbose): Display `Cap' flag in device status.

	* lspci.c (show_htype0): Display capability lists whereever
	available. The only capability name we recognize now is `AGP'.
	Unfortunately, capabilities are stored in device-dependent
	portion of the configuration space and are thus available
	only to root unless you read a dump.

	* lspci.c (scan_devices): Use cache instead of buffering.

	* lib/buffer.c: Removed (obsoleted by the cache).

	* lib/access.c: Added general caching mechanism.

Sat Jan 23 21:30:54 1999  Martin Mares  <[email protected]>

	* pci.ids: Added few devices.

Fri Jan 22 19:29:31 1999  Martin Mares  <[email protected]>

	* Version string is now defined in top-level Makefile, exported
	to the configure script and also substituted to man pages.

	* lspci.c (show_bases): Rewrote displaying of 64-bit addresses.
	(show_verbose): Rewrote interrupt display logic.

	* lib/i386-ports.c: Include sys/io.h only on glibc systems.

	* lib/configure: Rewrote detection of Linux versions. Now it
	works on 2.0 kernels (only with direct/dump access, of course).

	* lib/internal.h: New bytesex macros using <asm/byteorder.h>
	whenever available.

	* lib/proc.c (proc_read, proc_write): Distinguish between short
	read/write and real errors.

	* lspci.c (show_htype{0,1}): Always use d->dev->rom_base_addr since
	libpci respects buscentric mode automatically.

	* lspci.c (show_hex_dump): For CardBus bridges, print out 128
	bytes of header (the whole standard part).

	* common.c: pcilib options are now all uppercase. Also moved
	PCI access debugging option here.

	* Released as 1.99.2.

Wed Jan 20 22:50:35 1999  Martin Mares  <[email protected]>

	* Wrote configure script and rewrote Makefiles.

	* Removed few unused variables.

Wed Jan 20 12:21:56 1999  Martin Mares  <[email protected]>

	* common.c: Moved several functions used in both setpci and lspci
	here. This includes parsing of libpci-related options.

	* More library tweaks.

	* filter.c, names.c: Moved to library.

	* setpci: Rewritten to use the library.

	* Released as 1.99.1.

Tue Jan 19 23:00:12 1999  Martin Mares  <[email protected]>

	* lspci.c (scan_devices): For cardbus bridges, read first 128
	bytes of config space to get full standard header.

	* Makefile (CFLAGS): Removed "-Wno-unused".

	* Started the "New Generation" branch and introduced the
	PCI library.

	* lspci: Rewritten to use the library.

Tue Jan 19 22:24:08 1999  Martin Mares  <[email protected]>

	* Released as version 1.10.

Mon Jan 18 08:51:17 1999  Martin Mares  <[email protected]>

	* lspci.8, setpci.8: Miscellaneous fixes as suggested by
	Dag Wieers <[email protected]>.

Sun Nov 29 20:05:56 1998  Martin Mares  <[email protected]>

	* pciutils.spec (Name): Update from Krzysztof G. Baranowski.

Sun Nov 22 10:49:56 1998  Martin Mares  <[email protected]>

	* Makefile, pciutils.h: Moved pci.ids to /usr/share.

	* Released as version 1.09.

Wed Nov 18 15:47:05 1998  Martin Mares  <[email protected]>

	* lspci.c (show_htype1): Fixed displaying of prefetchable memory behind
	bridge. Thanks to Petr Vandrovec <[email protected]> for bug report.

Fri Oct 23 18:59:19 1998  Martin Mares  <[email protected]>

	* setpci.c: Don't include <syscall-list.h> with glibc >= 2.1.

Mon Oct 19 21:53:30 1998  Martin Mares  <[email protected]>

	* Released as version 1.08.

	* setpci.c: glibc 2.1.x already defines pread() and pwrite().

	* lspci.8: Changed warning about lspci -xxx.

	* lspci.c: Require "-xxx" for full configuration space dump, so that
	it's impossible to crash the machine by single typo.

	* specs: Added (courtesy of Krzysztof G. Baranowski <[email protected]>).

Wed Sep  9 12:03:24 1998  Martin Mares  <[email protected]>

	* lspci.c (show_bases): Better displaying of unassigned and
	disabled bases. Thanks to Gabriel Paubert <[email protected]>
	for an idea.

Wed Sep  2 10:58:01 1998  Martin Mares  <[email protected]>

	* setpci.c (pread): Recognize glibc 1.99 numbered as 2.0 on the PPC.
	(thanks to Geert Uytterhoeven for finding this out)

Fri Jul 17 10:43:30 1998  Martin Mares  <[email protected]>

	* lspci.c (show_verbose): Print subsystem ID using the new resolver.
	(show_machine): Print subsystem ID.

	* names.c: New name resolution engine supporting subsystem IDs.

	* Released as version 1.07.

Wed Jul 15 15:37:21 1998  Martin Mares  <[email protected]>

	* lspci.c (show_htype2 etc.): Displaying of CardBus headers.
	(show_bases): Honor the `cnt' argument.
	(grow_tree): Parse CardBus headers in tree mode as well.

	* pci.h: Updated CardBus header field description. I still don't
	have the CardBus standard available, but OZ6832 specs contain
	full description of all header fields supported by the chip.

Tue Jun  9 22:53:59 1998  Martin Mares  <[email protected]>

	* Released as 1.06.

	* names.c (parse_name_list): Killed an unused variable.

	* setpci.c (pread, pwrite): Define SYS_(pread|pwrite) as __NR_\1
	if they are not defined by glibc (needed for glibc built on older
	kernels). Ugly.

	* setpci.c (exec_op): Fixed error messages. Thanks, Steve!

Mon Jun  8 10:59:22 1998  Martin Mares  <[email protected]>

	* Released as 1.05.

	* setpci.c: Problems with pread()/pwrite() with glibc on Alpha
	should be gone. Again thanks to Steve for bug report.

	* filter.c (filter_parse_slot): Fixed ":x" type filters.

	* pci.ids: Killed duplicate entry. Thanks to Stephen Williams
	<[email protected]> for reporting this.

Sun Jun  7 19:27:51 1998  Martin Mares  <[email protected]>

	* lspci.c (main), setpci.c (main): Implemented "--version".

	* Released as 1.04.

	* pciutils.h (PCIUTILS_VERSION): Added version string.

	* filter.c, names.c: Extraneous #include <linux/pci.h> removed.
	Thanks to Geert Uytterhoeven <[email protected]>
	for bug report.

Thu May 28 14:45:58 1998  Martin Mares  <[email protected]>

	* pci.ids: More updates from Jens Maurer.

Wed Apr 22 10:00:39 1998  Martin Mares  <[email protected]>

	* pci.ids: Updates from Jens Maurer.

Sun Apr 19 11:14:25 1998  Martin Mares  <[email protected]>

	* Released as 1.03.

	* setpci.8: Written.

	* setpci.c: Finished.

	* lspci.c: Now able to fetch expansion ROM base from kernel device list
	and print it if not in buscentric mode.

Tue Mar 31 23:11:57 1998  Martin Mares  <[email protected]>

	* setpci.c: Added.

Sun Mar 22 15:39:08 1998  Martin Mares  <[email protected]>

	* lspci.8: Updated the documentation.

	* lspci.c: Modified to use the new filtering mechanism (options -f and -d).

	* filter.c: Introduced new generic device filter.

Thu Mar 19 17:03:48 1998  Martin Mares  <[email protected]>

	* lspci.c (grow_tree, show_tree_dev, print_it): Fixed displaying
	of PCI-to-PCI bridges in the tree format.

Sun Feb 15 10:12:25 1998  Martin Mares  <[email protected]>

	* lspci.c (show_machine): Added non-verbose mode of machine-readable
	dump.

	* pci.ids: Updates from Jens Maurer.

	* Released as version 1.02.

Thu Feb 12 16:53:28 1998  Martin Mares  <[email protected]>

	* lspci.c: Added a "-m" switch for dumping machine-readable
	configuration data (requested by Bjoern Kriews <[email protected]>).

Mon Feb  9 13:17:43 1998  Martin Mares  <[email protected]>

	* Makefile, pciutils.h: Include local pci.h instead of <linux/pci.h>
	if available. This should avoid all problems with official kernel
	not synchronized to newer PCI code in CVS -- standard distribution
	of pciutils now contains pci.h from current CVS kernel, pciutils
	in CVS contain no pci.h and use the correct kernel include.

	* Makefile: Fixed installation path for man pages.

Sat Feb  7 15:15:46 1998  Martin Mares  <[email protected]>

	* README: Updated.

	* lspci.8: Created a man page.

	* Releasing as version 1.0.

Tue Feb  3 20:56:00 1998  Martin Mares  <[email protected]>

	* Makefile: Recognize architecture by calling uname and pass it as ARCH_xxx
	to all the C sources. This should eliminate problems with 32-bit compilers
	on sparc64.

	* lspci.c (show_verbose): Recognize CardBus bridge header type.
	(show_htype2): Stub routine.
	(scan_config): Write sensible error message if the kernel denies reading of
	upper part of the PCI config space.