1# SPDX-License-Identifier: GPL-2.0 2#### 3# kbuild: Generic definitions 4 5# Convenient variables 6comma := , 7quote := " 8squote := ' 9empty := 10space := $(empty) $(empty) 11space_escape := _-_SPACE_-_ 12pound := \# 13 14### 15# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o 16dot-target = $(dir $@).$(notdir $@) 17 18### 19# The temporary file to save gcc -MMD generated dependencies must not 20# contain a comma 21depfile = $(subst $(comma),_,$(dot-target).d) 22 23### 24# filename of target with directory and extension stripped 25basetarget = $(basename $(notdir $@)) 26 27### 28# real prerequisites without phony targets 29real-prereqs = $(filter-out $(PHONY), $^) 30 31### 32# Escape single quote for use in echo statements 33escsq = $(subst $(squote),'\$(squote)',$1) 34 35### 36# Quote a string to pass it to C files. foo => '"foo"' 37stringify = $(squote)$(quote)$1$(quote)$(squote) 38 39### 40# Easy method for doing a status message 41 kecho := : 42 quiet_kecho := echo 43silent_kecho := : 44kecho := $($(quiet)kecho) 45 46### 47# filechk is used to check if the content of a generated file is updated. 48# Sample usage: 49# 50# filechk_sample = echo $(KERNELRELEASE) 51# version.h: FORCE 52# $(call filechk,sample) 53# 54# The rule defined shall write to stdout the content of the new file. 55# The existing file will be compared with the new one. 56# - If no file exist it is created 57# - If the content differ the new file is used 58# - If they are equal no change, and no timestamp update 59define filechk 60 $(Q)set -e; \ 61 mkdir -p $(dir $@); \ 62 trap "rm -f $(dot-target).tmp" EXIT; \ 63 { $(filechk_$(1)); } > $(dot-target).tmp; \ 64 if [ ! -r $@ ] || ! cmp -s $@ $(dot-target).tmp; then \ 65 $(kecho) ' UPD $@'; \ 66 mv -f $(dot-target).tmp $@; \ 67 fi 68endef 69 70### 71# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= 72# Usage: 73# $(Q)$(MAKE) $(build)=dir 74build := -f $(srctree)/scripts/Makefile.build obj 75 76### 77# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj= 78# Usage: 79# $(Q)$(MAKE) $(dtbinst)=dir 80dtbinst := -f $(srctree)/scripts/Makefile.dtbinst obj 81 82### 83# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj= 84# Usage: 85# $(Q)$(MAKE) $(clean)=dir 86clean := -f $(srctree)/scripts/Makefile.clean obj 87 88# echo command. 89# Short version is used, if $(quiet) equals `quiet_', otherwise full one. 90echo-cmd = $(if $($(quiet)cmd_$(1)),\ 91 echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';) 92 93# sink stdout for 'make -s' 94 redirect := 95 quiet_redirect := 96silent_redirect := exec >/dev/null; 97 98# printing commands 99cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(cmd_$(1)) 100 101### 102# if_changed - execute command if any prerequisite is newer than 103# target, or command line has changed 104# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies 105# including used config symbols 106# if_changed_rule - as if_changed but execute rule instead 107# See Documentation/kbuild/makefiles.rst for more info 108 109ifneq ($(KBUILD_NOCMDDEP),1) 110# Check if both commands are the same including their order. Result is empty 111# string if equal. User may override this check using make KBUILD_NOCMDDEP=1 112cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \ 113 $(subst $(space),$(space_escape),$(strip $(cmd_$1)))) 114else 115cmd-check = $(if $(strip $(cmd_$@)),,1) 116endif 117 118# Replace >$< with >$$< to preserve $ when reloading the .cmd file 119# (needed for make) 120# Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file 121# (needed for make) 122# Replace >'< with >'\''< to be able to enclose the whole string in '...' 123# (needed for the shell) 124make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1))))) 125 126# Find any prerequisites that are newer than target or that do not exist. 127# (This is not true for now; $? should contain any non-existent prerequisites, 128# but it does not work as expected when .SECONDARY is present. This seems a bug 129# of GNU Make.) 130# PHONY targets skipped in both cases. 131newer-prereqs = $(filter-out $(PHONY),$?) 132 133if-changed-cond = $(newer-prereqs)$(cmd-check) 134 135# Execute command if command has changed or prerequisite(s) are updated. 136if_changed = $(if $(if-changed-cond), \ 137 $(cmd); \ 138 printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:) 139 140# Execute the command and also postprocess generated .d dependencies file. 141if_changed_dep = $(if $(if-changed-cond),$(cmd_and_fixdep),@:) 142 143cmd_and_fixdep = \ 144 $(cmd); \ 145 scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\ 146 rm -f $(depfile) 147 148# Usage: $(call if_changed_rule,foo) 149# Will check if $(cmd_foo) or any of the prerequisites changed, 150# and if so will execute $(rule_foo). 151if_changed_rule = $(if $(if-changed-cond),$(rule_$(1)),@:) 152 153### 154# why - tell why a target got built 155# enabled by make V=2 156# Output (listed in the order they are checked): 157# (1) - due to target is PHONY 158# (2) - due to target missing 159# (3) - due to: file1.h file2.h 160# (4) - due to command line change 161# (5) - due to missing .cmd file 162# (6) - due to target not in $(targets) 163# (1) PHONY targets are always build 164# (2) No target, so we better build it 165# (3) Prerequisite is newer than target 166# (4) The command line stored in the file named dir/.target.cmd 167# differed from actual command line. This happens when compiler 168# options changes 169# (5) No dir/.target.cmd file (used to store command line) 170# (6) No dir/.target.cmd file and target not listed in $(targets) 171# This is a good hint that there is a bug in the kbuild file 172ifeq ($(KBUILD_VERBOSE),2) 173why = \ 174 $(if $(filter $@, $(PHONY)),- due to target is PHONY, \ 175 $(if $(wildcard $@), \ 176 $(if $(newer-prereqs),- due to: $(newer-prereqs), \ 177 $(if $(cmd-check), \ 178 $(if $(cmd_$@),- due to command line change, \ 179 $(if $(filter $@, $(targets)), \ 180 - due to missing .cmd file, \ 181 - due to $(notdir $@) not in $$(targets) \ 182 ) \ 183 ) \ 184 ) \ 185 ), \ 186 - due to target missing \ 187 ) \ 188 ) 189 190echo-why = $(call escsq, $(strip $(why))) 191endif 192 193############################################################################### 194# 195# When a Kconfig string contains a filename, it is suitable for 196# passing to shell commands. It is surrounded by double-quotes, and 197# any double-quotes or backslashes within it are escaped by 198# backslashes. 199# 200# This is no use for dependencies or $(wildcard). We need to strip the 201# surrounding quotes and the escaping from quotes and backslashes, and 202# we *do* need to escape any spaces in the string. So, for example: 203# 204# Usage: $(eval $(call config_filename,FOO)) 205# 206# Defines FOO_FILENAME based on the contents of the CONFIG_FOO option, 207# transformed as described above to be suitable for use within the 208# makefile. 209# 210# Also, if the filename is a relative filename and exists in the source 211# tree but not the build tree, define FOO_SRCPREFIX as $(srctree)/ to 212# be prefixed to *both* command invocation and dependencies. 213# 214# Note: We also print the filenames in the quiet_cmd_foo text, and 215# perhaps ought to have a version specially escaped for that purpose. 216# But it's only cosmetic, and $(patsubst "%",%,$(CONFIG_FOO)) is good 217# enough. It'll strip the quotes in the common case where there's no 218# space and it's a simple filename, and it'll retain the quotes when 219# there's a space. There are some esoteric cases in which it'll print 220# the wrong thing, but we don't really care. The actual dependencies 221# and commands *do* get it right, with various combinations of single 222# and double quotes, backslashes and spaces in the filenames. 223# 224############################################################################### 225# 226define config_filename 227ifneq ($$(CONFIG_$(1)),"") 228$(1)_FILENAME := $$(subst \\,\,$$(subst \$$(quote),$$(quote),$$(subst $$(space_escape),\$$(space),$$(patsubst "%",%,$$(subst $$(space),$$(space_escape),$$(CONFIG_$(1))))))) 229ifneq ($$(patsubst /%,%,$$(firstword $$($(1)_FILENAME))),$$(firstword $$($(1)_FILENAME))) 230else 231ifeq ($$(wildcard $$($(1)_FILENAME)),) 232ifneq ($$(wildcard $$(srctree)/$$($(1)_FILENAME)),) 233$(1)_SRCPREFIX := $(srctree)/ 234endif 235endif 236endif 237endif 238endef 239# 240############################################################################### 241 242# delete partially updated (i.e. corrupted) files on error 243.DELETE_ON_ERROR: 244 245# do not delete intermediate files automatically 246.SECONDARY: 247