xref: /linux-6.15/net/ipv6/netfilter/Kconfig (revision c78efc99)
1#
2# IP netfilter configuration
3#
4
5menu "IPv6: Netfilter Configuration"
6	depends on INET && IPV6 && NETFILTER
7
8config NF_SOCKET_IPV6
9	tristate "IPv6 socket lookup support"
10	help
11	  This option enables the IPv6 socket lookup infrastructure. This
12	  is used by the {ip6,nf}tables socket match.
13
14config NF_TPROXY_IPV6
15	tristate "IPv6 tproxy support"
16
17if NF_TABLES
18
19config NF_TABLES_IPV6
20	bool "IPv6 nf_tables support"
21	help
22	  This option enables the IPv6 support for nf_tables.
23
24if NF_TABLES_IPV6
25
26config NFT_CHAIN_ROUTE_IPV6
27	tristate "IPv6 nf_tables route chain support"
28	help
29	  This option enables the "route" chain for IPv6 in nf_tables. This
30	  chain type is used to force packet re-routing after mangling header
31	  fields such as the source, destination, flowlabel, hop-limit and
32	  the packet mark.
33
34if NF_NAT
35
36config NFT_CHAIN_NAT_IPV6
37	tristate "IPv6 nf_tables nat chain support"
38	help
39	  This option enables the "nat" chain for IPv6 in nf_tables. This
40	  chain type is used to perform Network Address Translation (NAT)
41	  packet transformations such as the source, destination address and
42	  source and destination ports.
43
44config NFT_MASQ_IPV6
45	tristate "IPv6 masquerade support for nf_tables"
46	depends on NFT_MASQ
47	select NF_NAT_MASQUERADE
48	help
49	  This is the expression that provides IPv4 masquerading support for
50	  nf_tables.
51
52endif # NF_NAT
53
54config NFT_REJECT_IPV6
55	select NF_REJECT_IPV6
56	default NFT_REJECT
57	tristate
58
59config NFT_DUP_IPV6
60	tristate "IPv6 nf_tables packet duplication support"
61	depends on !NF_CONNTRACK || NF_CONNTRACK
62	select NF_DUP_IPV6
63	help
64	  This module enables IPv6 packet duplication support for nf_tables.
65
66config NFT_FIB_IPV6
67	tristate "nf_tables fib / ipv6 route lookup support"
68	select NFT_FIB
69	help
70	  This module enables IPv6 FIB lookups, e.g. for reverse path filtering.
71	  It also allows query of the FIB for the route type, e.g. local, unicast,
72	  multicast or blackhole.
73
74endif # NF_TABLES_IPV6
75endif # NF_TABLES
76
77config NF_FLOW_TABLE_IPV6
78	tristate "Netfilter flow table IPv6 module"
79	depends on NF_FLOW_TABLE
80	help
81	  This option adds the flow table IPv6 support.
82
83	  To compile it as a module, choose M here.
84
85config NF_DUP_IPV6
86	tristate "Netfilter IPv6 packet duplication to alternate destination"
87	depends on !NF_CONNTRACK || NF_CONNTRACK
88	help
89	  This option enables the nf_dup_ipv6 core, which duplicates an IPv6
90	  packet to be rerouted to another destination.
91
92config NF_REJECT_IPV6
93	tristate "IPv6 packet rejection"
94	default m if NETFILTER_ADVANCED=n
95
96config NF_LOG_IPV6
97	tristate "IPv6 packet logging"
98	default m if NETFILTER_ADVANCED=n
99	select NF_LOG_COMMON
100
101config IP6_NF_IPTABLES
102	tristate "IP6 tables support (required for filtering)"
103	depends on INET && IPV6
104	select NETFILTER_XTABLES
105	default m if NETFILTER_ADVANCED=n
106	help
107	  ip6tables is a general, extensible packet identification framework.
108	  Currently only the packet filtering and packet mangling subsystem
109	  for IPv6 use this, but connection tracking is going to follow.
110	  Say 'Y' or 'M' here if you want to use either of those.
111
112	  To compile it as a module, choose M here.  If unsure, say N.
113
114if IP6_NF_IPTABLES
115
116# The simple matches.
117config IP6_NF_MATCH_AH
118	tristate '"ah" match support'
119	depends on NETFILTER_ADVANCED
120	help
121	  This module allows one to match AH packets.
122
123	  To compile it as a module, choose M here.  If unsure, say N.
124
125config IP6_NF_MATCH_EUI64
126	tristate '"eui64" address check'
127	depends on NETFILTER_ADVANCED
128	help
129	  This module performs checking on the IPv6 source address
130	  Compares the last 64 bits with the EUI64 (delivered
131	  from the MAC address) address
132
133	  To compile it as a module, choose M here.  If unsure, say N.
134
135config IP6_NF_MATCH_FRAG
136	tristate '"frag" Fragmentation header match support'
137	depends on NETFILTER_ADVANCED
138	help
139	  frag matching allows you to match packets based on the fragmentation
140	  header of the packet.
141
142	  To compile it as a module, choose M here.  If unsure, say N.
143
144config IP6_NF_MATCH_OPTS
145	tristate '"hbh" hop-by-hop and "dst" opts header match support'
146	depends on NETFILTER_ADVANCED
147	help
148	  This allows one to match packets based on the hop-by-hop
149	  and destination options headers of a packet.
150
151	  To compile it as a module, choose M here.  If unsure, say N.
152
153config IP6_NF_MATCH_HL
154	tristate '"hl" hoplimit match support'
155	depends on NETFILTER_ADVANCED
156	select NETFILTER_XT_MATCH_HL
157	---help---
158	This is a backwards-compat option for the user's convenience
159	(e.g. when running oldconfig). It selects
160	CONFIG_NETFILTER_XT_MATCH_HL.
161
162config IP6_NF_MATCH_IPV6HEADER
163	tristate '"ipv6header" IPv6 Extension Headers Match'
164	default m if NETFILTER_ADVANCED=n
165	help
166	  This module allows one to match packets based upon
167	  the ipv6 extension headers.
168
169	  To compile it as a module, choose M here.  If unsure, say N.
170
171config IP6_NF_MATCH_MH
172	tristate '"mh" match support'
173	depends on NETFILTER_ADVANCED
174	help
175	  This module allows one to match MH packets.
176
177	  To compile it as a module, choose M here.  If unsure, say N.
178
179config IP6_NF_MATCH_RPFILTER
180	tristate '"rpfilter" reverse path filter match support'
181	depends on NETFILTER_ADVANCED
182	depends on IP6_NF_MANGLE || IP6_NF_RAW
183	---help---
184	  This option allows you to match packets whose replies would
185	  go out via the interface the packet came in.
186
187	  To compile it as a module, choose M here.  If unsure, say N.
188	  The module will be called ip6t_rpfilter.
189
190config IP6_NF_MATCH_RT
191	tristate '"rt" Routing header match support'
192	depends on NETFILTER_ADVANCED
193	help
194	  rt matching allows you to match packets based on the routing
195	  header of the packet.
196
197	  To compile it as a module, choose M here.  If unsure, say N.
198
199config IP6_NF_MATCH_SRH
200        tristate '"srh" Segment Routing header match support'
201        depends on NETFILTER_ADVANCED
202        help
203          srh matching allows you to match packets based on the segment
204	  routing header of the packet.
205
206          To compile it as a module, choose M here.  If unsure, say N.
207
208# The targets
209config IP6_NF_TARGET_HL
210	tristate '"HL" hoplimit target support'
211	depends on NETFILTER_ADVANCED && IP6_NF_MANGLE
212	select NETFILTER_XT_TARGET_HL
213	---help---
214	This is a backwards-compatible option for the user's convenience
215	(e.g. when running oldconfig). It selects
216	CONFIG_NETFILTER_XT_TARGET_HL.
217
218config IP6_NF_FILTER
219	tristate "Packet filtering"
220	default m if NETFILTER_ADVANCED=n
221	help
222	  Packet filtering defines a table `filter', which has a series of
223	  rules for simple packet filtering at local input, forwarding and
224	  local output.  See the man page for iptables(8).
225
226	  To compile it as a module, choose M here.  If unsure, say N.
227
228config IP6_NF_TARGET_REJECT
229	tristate "REJECT target support"
230	depends on IP6_NF_FILTER
231	select NF_REJECT_IPV6
232	default m if NETFILTER_ADVANCED=n
233	help
234	  The REJECT target allows a filtering rule to specify that an ICMPv6
235	  error should be issued in response to an incoming packet, rather
236	  than silently being dropped.
237
238	  To compile it as a module, choose M here.  If unsure, say N.
239
240config IP6_NF_TARGET_SYNPROXY
241	tristate "SYNPROXY target support"
242	depends on NF_CONNTRACK && NETFILTER_ADVANCED
243	select NETFILTER_SYNPROXY
244	select SYN_COOKIES
245	help
246	  The SYNPROXY target allows you to intercept TCP connections and
247	  establish them using syncookies before they are passed on to the
248	  server. This allows to avoid conntrack and server resource usage
249	  during SYN-flood attacks.
250
251	  To compile it as a module, choose M here. If unsure, say N.
252
253config IP6_NF_MANGLE
254	tristate "Packet mangling"
255	default m if NETFILTER_ADVANCED=n
256	help
257	  This option adds a `mangle' table to iptables: see the man page for
258	  iptables(8).  This table is used for various packet alterations
259	  which can effect how the packet is routed.
260
261	  To compile it as a module, choose M here.  If unsure, say N.
262
263config IP6_NF_RAW
264	tristate  'raw table support (required for TRACE)'
265	help
266	  This option adds a `raw' table to ip6tables. This table is the very
267	  first in the netfilter framework and hooks in at the PREROUTING
268	  and OUTPUT chains.
269
270	  If you want to compile it as a module, say M here and read
271	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
272
273# security table for MAC policy
274config IP6_NF_SECURITY
275       tristate "Security table"
276       depends on SECURITY
277       depends on NETFILTER_ADVANCED
278       help
279         This option adds a `security' table to iptables, for use
280         with Mandatory Access Control (MAC) policy.
281
282         If unsure, say N.
283
284config IP6_NF_NAT
285	tristate "ip6tables NAT support"
286	depends on NF_CONNTRACK
287	depends on NETFILTER_ADVANCED
288	select NF_NAT
289	select NETFILTER_XT_NAT
290	help
291	  This enables the `nat' table in ip6tables. This allows masquerading,
292	  port forwarding and other forms of full Network Address Port
293	  Translation.
294
295	  To compile it as a module, choose M here.  If unsure, say N.
296
297if IP6_NF_NAT
298
299config IP6_NF_TARGET_MASQUERADE
300	tristate "MASQUERADE target support"
301	select NF_NAT_MASQUERADE
302	help
303	  Masquerading is a special case of NAT: all outgoing connections are
304	  changed to seem to come from a particular interface's address, and
305	  if the interface goes down, those connections are lost.  This is
306	  only useful for dialup accounts with dynamic IP address (ie. your IP
307	  address will be different on next dialup).
308
309	  To compile it as a module, choose M here.  If unsure, say N.
310
311config IP6_NF_TARGET_NPT
312	tristate "NPT (Network Prefix translation) target support"
313	help
314	  This option adds the `SNPT' and `DNPT' target, which perform
315	  stateless IPv6-to-IPv6 Network Prefix Translation per RFC 6296.
316
317	  To compile it as a module, choose M here.  If unsure, say N.
318
319endif # IP6_NF_NAT
320
321endif # IP6_NF_IPTABLES
322endmenu
323
324config NF_DEFRAG_IPV6
325	tristate
326