1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * This file holds USB constants and structures that are needed for 4 * USB device APIs. These are used by the USB device model, which is 5 * defined in chapter 9 of the USB 2.0 specification and in the 6 * Wireless USB 1.0 spec (now defunct). Linux has several APIs in C that 7 * need these: 8 * 9 * - the master/host side Linux-USB kernel driver API; 10 * - the "usbfs" user space API; and 11 * - the Linux "gadget" slave/device/peripheral side driver API. 12 * 13 * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems 14 * act either as a USB master/host or as a USB slave/device. That means 15 * the master and slave side APIs benefit from working well together. 16 * 17 * Note all descriptors are declared '__attribute__((packed))' so that: 18 * 19 * [a] they never get padded, either internally (USB spec writers 20 * probably handled that) or externally; 21 * 22 * [b] so that accessing bigger-than-a-bytes fields will never 23 * generate bus errors on any platform, even when the location of 24 * its descriptor inside a bundle isn't "naturally aligned", and 25 * 26 * [c] for consistency, removing all doubt even when it appears to 27 * someone that the two other points are non-issues for that 28 * particular descriptor type. 29 */ 30 31 #ifndef _UAPI__LINUX_USB_CH9_H 32 #define _UAPI__LINUX_USB_CH9_H 33 34 #include <linux/types.h> /* __u8 etc */ 35 #include <asm/byteorder.h> /* le16_to_cpu */ 36 37 /*-------------------------------------------------------------------------*/ 38 39 /* CONTROL REQUEST SUPPORT */ 40 41 /* 42 * USB directions 43 * 44 * This bit flag is used in endpoint descriptors' bEndpointAddress field. 45 * It's also one of three fields in control requests bRequestType. 46 */ 47 #define USB_DIR_OUT 0 /* to device */ 48 #define USB_DIR_IN 0x80 /* to host */ 49 50 /* 51 * USB types, the second of three bRequestType fields 52 */ 53 #define USB_TYPE_MASK (0x03 << 5) 54 #define USB_TYPE_STANDARD (0x00 << 5) 55 #define USB_TYPE_CLASS (0x01 << 5) 56 #define USB_TYPE_VENDOR (0x02 << 5) 57 #define USB_TYPE_RESERVED (0x03 << 5) 58 59 /* 60 * USB recipients, the third of three bRequestType fields 61 */ 62 #define USB_RECIP_MASK 0x1f 63 #define USB_RECIP_DEVICE 0x00 64 #define USB_RECIP_INTERFACE 0x01 65 #define USB_RECIP_ENDPOINT 0x02 66 #define USB_RECIP_OTHER 0x03 67 /* From Wireless USB 1.0 */ 68 #define USB_RECIP_PORT 0x04 69 #define USB_RECIP_RPIPE 0x05 70 71 /* 72 * Standard requests, for the bRequest field of a SETUP packet. 73 * 74 * These are qualified by the bRequestType field, so that for example 75 * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved 76 * by a GET_STATUS request. 77 */ 78 #define USB_REQ_GET_STATUS 0x00 79 #define USB_REQ_CLEAR_FEATURE 0x01 80 #define USB_REQ_SET_FEATURE 0x03 81 #define USB_REQ_SET_ADDRESS 0x05 82 #define USB_REQ_GET_DESCRIPTOR 0x06 83 #define USB_REQ_SET_DESCRIPTOR 0x07 84 #define USB_REQ_GET_CONFIGURATION 0x08 85 #define USB_REQ_SET_CONFIGURATION 0x09 86 #define USB_REQ_GET_INTERFACE 0x0A 87 #define USB_REQ_SET_INTERFACE 0x0B 88 #define USB_REQ_SYNCH_FRAME 0x0C 89 #define USB_REQ_SET_SEL 0x30 90 #define USB_REQ_SET_ISOCH_DELAY 0x31 91 92 #define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ 93 #define USB_REQ_GET_ENCRYPTION 0x0E 94 #define USB_REQ_RPIPE_ABORT 0x0E 95 #define USB_REQ_SET_HANDSHAKE 0x0F 96 #define USB_REQ_RPIPE_RESET 0x0F 97 #define USB_REQ_GET_HANDSHAKE 0x10 98 #define USB_REQ_SET_CONNECTION 0x11 99 #define USB_REQ_SET_SECURITY_DATA 0x12 100 #define USB_REQ_GET_SECURITY_DATA 0x13 101 #define USB_REQ_SET_WUSB_DATA 0x14 102 #define USB_REQ_LOOPBACK_DATA_WRITE 0x15 103 #define USB_REQ_LOOPBACK_DATA_READ 0x16 104 #define USB_REQ_SET_INTERFACE_DS 0x17 105 106 /* specific requests for USB Power Delivery */ 107 #define USB_REQ_GET_PARTNER_PDO 20 108 #define USB_REQ_GET_BATTERY_STATUS 21 109 #define USB_REQ_SET_PDO 22 110 #define USB_REQ_GET_VDM 23 111 #define USB_REQ_SEND_VDM 24 112 113 /* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, 114 * used by hubs to put ports into a new L1 suspend state, except that it 115 * forgot to define its number ... 116 */ 117 118 /* 119 * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and 120 * are read as a bit array returned by USB_REQ_GET_STATUS. (So there 121 * are at most sixteen features of each type.) Hubs may also support a 122 * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. 123 */ 124 #define USB_DEVICE_SELF_POWERED 0 /* (read only) */ 125 #define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ 126 #define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ 127 #define USB_DEVICE_BATTERY 2 /* (wireless) */ 128 #define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ 129 #define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ 130 #define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ 131 #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ 132 #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ 133 134 /* 135 * Test Mode Selectors 136 * See USB 2.0 spec Table 9-7 137 */ 138 #define USB_TEST_J 1 139 #define USB_TEST_K 2 140 #define USB_TEST_SE0_NAK 3 141 #define USB_TEST_PACKET 4 142 #define USB_TEST_FORCE_ENABLE 5 143 144 /* Status Type */ 145 #define USB_STATUS_TYPE_STANDARD 0 146 #define USB_STATUS_TYPE_PTM 1 147 148 /* 149 * New Feature Selectors as added by USB 3.0 150 * See USB 3.0 spec Table 9-7 151 */ 152 #define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ 153 #define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ 154 #define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ 155 #define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ 156 157 #define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 158 /* 159 * Suspend Options, Table 9-8 USB 3.0 spec 160 */ 161 #define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) 162 #define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) 163 164 /* 165 * Interface status, Figure 9-5 USB 3.0 spec 166 */ 167 #define USB_INTRF_STAT_FUNC_RW_CAP 1 168 #define USB_INTRF_STAT_FUNC_RW 2 169 170 #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ 171 172 /* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ 173 #define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ 174 #define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ 175 #define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ 176 177 /* 178 * Feature selectors from Table 9-8 USB Power Delivery spec 179 */ 180 #define USB_DEVICE_BATTERY_WAKE_MASK 40 181 #define USB_DEVICE_OS_IS_PD_AWARE 41 182 #define USB_DEVICE_POLICY_MODE 42 183 #define USB_PORT_PR_SWAP 43 184 #define USB_PORT_GOTO_MIN 44 185 #define USB_PORT_RETURN_POWER 45 186 #define USB_PORT_ACCEPT_PD_REQUEST 46 187 #define USB_PORT_REJECT_PD_REQUEST 47 188 #define USB_PORT_PORT_PD_RESET 48 189 #define USB_PORT_C_PORT_PD_CHANGE 49 190 #define USB_PORT_CABLE_PD_RESET 50 191 #define USB_DEVICE_CHARGING_POLICY 54 192 193 /** 194 * struct usb_ctrlrequest - SETUP data for a USB device control request 195 * @bRequestType: matches the USB bmRequestType field 196 * @bRequest: matches the USB bRequest field 197 * @wValue: matches the USB wValue field (le16 byte order) 198 * @wIndex: matches the USB wIndex field (le16 byte order) 199 * @wLength: matches the USB wLength field (le16 byte order) 200 * 201 * This structure is used to send control requests to a USB device. It matches 202 * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the 203 * USB spec for a fuller description of the different fields, and what they are 204 * used for. 205 * 206 * Note that the driver for any interface can issue control requests. 207 * For most devices, interfaces don't coordinate with each other, so 208 * such requests may be made at any time. 209 */ 210 struct usb_ctrlrequest { 211 __u8 bRequestType; 212 __u8 bRequest; 213 __le16 wValue; 214 __le16 wIndex; 215 __le16 wLength; 216 } __attribute__ ((packed)); 217 218 /*-------------------------------------------------------------------------*/ 219 220 /* 221 * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or 222 * (rarely) accepted by SET_DESCRIPTOR. 223 * 224 * Note that all multi-byte values here are encoded in little endian 225 * byte order "on the wire". Within the kernel and when exposed 226 * through the Linux-USB APIs, they are not converted to cpu byte 227 * order; it is the responsibility of the client code to do this. 228 * The single exception is when device and configuration descriptors (but 229 * not other descriptors) are read from character devices 230 * (i.e. /dev/bus/usb/BBB/DDD); 231 * in this case the fields are converted to host endianness by the kernel. 232 */ 233 234 /* 235 * Descriptor types ... USB 2.0 spec table 9.5 236 */ 237 #define USB_DT_DEVICE 0x01 238 #define USB_DT_CONFIG 0x02 239 #define USB_DT_STRING 0x03 240 #define USB_DT_INTERFACE 0x04 241 #define USB_DT_ENDPOINT 0x05 242 #define USB_DT_DEVICE_QUALIFIER 0x06 243 #define USB_DT_OTHER_SPEED_CONFIG 0x07 244 #define USB_DT_INTERFACE_POWER 0x08 245 /* these are from a minor usb 2.0 revision (ECN) */ 246 #define USB_DT_OTG 0x09 247 #define USB_DT_DEBUG 0x0a 248 #define USB_DT_INTERFACE_ASSOCIATION 0x0b 249 /* these are from the Wireless USB spec */ 250 #define USB_DT_SECURITY 0x0c 251 #define USB_DT_KEY 0x0d 252 #define USB_DT_ENCRYPTION_TYPE 0x0e 253 #define USB_DT_BOS 0x0f 254 #define USB_DT_DEVICE_CAPABILITY 0x10 255 #define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 256 /* From the eUSB2 spec */ 257 #define USB_DT_EUSB2_ISOC_ENDPOINT_COMP 0x12 258 /* From Wireless USB spec */ 259 #define USB_DT_WIRE_ADAPTER 0x21 260 /* From USB Device Firmware Upgrade Specification, Revision 1.1 */ 261 #define USB_DT_DFU_FUNCTIONAL 0x21 262 /* these are from the Wireless USB spec */ 263 #define USB_DT_RPIPE 0x22 264 #define USB_DT_CS_RADIO_CONTROL 0x23 265 /* From the T10 UAS specification */ 266 #define USB_DT_PIPE_USAGE 0x24 267 /* From the USB 3.0 spec */ 268 #define USB_DT_SS_ENDPOINT_COMP 0x30 269 /* From the USB 3.1 spec */ 270 #define USB_DT_SSP_ISOC_ENDPOINT_COMP 0x31 271 272 /* Conventional codes for class-specific descriptors. The convention is 273 * defined in the USB "Common Class" Spec (3.11). Individual class specs 274 * are authoritative for their usage, not the "common class" writeup. 275 */ 276 #define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) 277 #define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) 278 #define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) 279 #define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) 280 #define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) 281 282 /* All standard descriptors have these 2 fields at the beginning */ 283 struct usb_descriptor_header { 284 __u8 bLength; 285 __u8 bDescriptorType; 286 } __attribute__ ((packed)); 287 288 289 /*-------------------------------------------------------------------------*/ 290 291 /* USB_DT_DEVICE: Device descriptor */ 292 struct usb_device_descriptor { 293 __u8 bLength; 294 __u8 bDescriptorType; 295 296 __le16 bcdUSB; 297 __u8 bDeviceClass; 298 __u8 bDeviceSubClass; 299 __u8 bDeviceProtocol; 300 __u8 bMaxPacketSize0; 301 __le16 idVendor; 302 __le16 idProduct; 303 __le16 bcdDevice; 304 __u8 iManufacturer; 305 __u8 iProduct; 306 __u8 iSerialNumber; 307 __u8 bNumConfigurations; 308 } __attribute__ ((packed)); 309 310 #define USB_DT_DEVICE_SIZE 18 311 312 313 /* 314 * Device and/or Interface Class codes 315 * as found in bDeviceClass or bInterfaceClass 316 * and defined by www.usb.org documents 317 */ 318 #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ 319 #define USB_CLASS_AUDIO 1 320 #define USB_CLASS_COMM 2 321 #define USB_CLASS_HID 3 322 #define USB_CLASS_PHYSICAL 5 323 #define USB_CLASS_STILL_IMAGE 6 324 #define USB_CLASS_PRINTER 7 325 #define USB_CLASS_MASS_STORAGE 8 326 #define USB_CLASS_HUB 9 327 #define USB_CLASS_CDC_DATA 0x0a 328 #define USB_CLASS_CSCID 0x0b /* chip+ smart card */ 329 #define USB_CLASS_CONTENT_SEC 0x0d /* content security */ 330 #define USB_CLASS_VIDEO 0x0e 331 #define USB_CLASS_WIRELESS_CONTROLLER 0xe0 332 #define USB_CLASS_PERSONAL_HEALTHCARE 0x0f 333 #define USB_CLASS_AUDIO_VIDEO 0x10 334 #define USB_CLASS_BILLBOARD 0x11 335 #define USB_CLASS_USB_TYPE_C_BRIDGE 0x12 336 #define USB_CLASS_MISC 0xef 337 #define USB_CLASS_APP_SPEC 0xfe 338 #define USB_SUBCLASS_DFU 0x01 339 340 #define USB_CLASS_VENDOR_SPEC 0xff 341 #define USB_SUBCLASS_VENDOR_SPEC 0xff 342 343 /*-------------------------------------------------------------------------*/ 344 345 /* USB_DT_CONFIG: Configuration descriptor information. 346 * 347 * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the 348 * descriptor type is different. Highspeed-capable devices can look 349 * different depending on what speed they're currently running. Only 350 * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG 351 * descriptors. 352 */ 353 struct usb_config_descriptor { 354 __u8 bLength; 355 __u8 bDescriptorType; 356 357 __le16 wTotalLength; 358 __u8 bNumInterfaces; 359 __u8 bConfigurationValue; 360 __u8 iConfiguration; 361 __u8 bmAttributes; 362 __u8 bMaxPower; 363 } __attribute__ ((packed)); 364 365 #define USB_DT_CONFIG_SIZE 9 366 367 /* from config descriptor bmAttributes */ 368 #define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ 369 #define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ 370 #define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ 371 #define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ 372 373 /*-------------------------------------------------------------------------*/ 374 375 /* USB String descriptors can contain at most 126 characters. */ 376 #define USB_MAX_STRING_LEN 126 377 378 /* USB_DT_STRING: String descriptor */ 379 struct usb_string_descriptor { 380 __u8 bLength; 381 __u8 bDescriptorType; 382 383 union { 384 __le16 legacy_padding; 385 __DECLARE_FLEX_ARRAY(__le16, wData); /* UTF-16LE encoded */ 386 }; 387 } __attribute__ ((packed)); 388 389 /* note that "string" zero is special, it holds language codes that 390 * the device supports, not Unicode characters. 391 */ 392 393 /*-------------------------------------------------------------------------*/ 394 395 /* USB_DT_INTERFACE: Interface descriptor */ 396 struct usb_interface_descriptor { 397 __u8 bLength; 398 __u8 bDescriptorType; 399 400 __u8 bInterfaceNumber; 401 __u8 bAlternateSetting; 402 __u8 bNumEndpoints; 403 __u8 bInterfaceClass; 404 __u8 bInterfaceSubClass; 405 __u8 bInterfaceProtocol; 406 __u8 iInterface; 407 } __attribute__ ((packed)); 408 409 #define USB_DT_INTERFACE_SIZE 9 410 411 /*-------------------------------------------------------------------------*/ 412 413 /* USB_DT_ENDPOINT: Endpoint descriptor */ 414 struct usb_endpoint_descriptor { 415 __u8 bLength; 416 __u8 bDescriptorType; 417 418 __u8 bEndpointAddress; 419 __u8 bmAttributes; 420 __le16 wMaxPacketSize; 421 __u8 bInterval; 422 423 /* NOTE: these two are _only_ in audio endpoints. */ 424 /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ 425 __u8 bRefresh; 426 __u8 bSynchAddress; 427 } __attribute__ ((packed)); 428 429 #define USB_DT_ENDPOINT_SIZE 7 430 #define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ 431 432 433 /* 434 * Endpoints 435 */ 436 #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ 437 #define USB_ENDPOINT_DIR_MASK 0x80 438 439 #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ 440 #define USB_ENDPOINT_XFER_CONTROL 0 441 #define USB_ENDPOINT_XFER_ISOC 1 442 #define USB_ENDPOINT_XFER_BULK 2 443 #define USB_ENDPOINT_XFER_INT 3 444 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 445 446 #define USB_ENDPOINT_MAXP_MASK 0x07ff 447 #define USB_EP_MAXP_MULT_SHIFT 11 448 #define USB_EP_MAXP_MULT_MASK (3 << USB_EP_MAXP_MULT_SHIFT) 449 #define USB_EP_MAXP_MULT(m) \ 450 (((m) & USB_EP_MAXP_MULT_MASK) >> USB_EP_MAXP_MULT_SHIFT) 451 452 /* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ 453 #define USB_ENDPOINT_INTRTYPE 0x30 454 #define USB_ENDPOINT_INTR_PERIODIC (0 << 4) 455 #define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) 456 457 #define USB_ENDPOINT_SYNCTYPE 0x0c 458 #define USB_ENDPOINT_SYNC_NONE (0 << 2) 459 #define USB_ENDPOINT_SYNC_ASYNC (1 << 2) 460 #define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) 461 #define USB_ENDPOINT_SYNC_SYNC (3 << 2) 462 463 #define USB_ENDPOINT_USAGE_MASK 0x30 464 #define USB_ENDPOINT_USAGE_DATA 0x00 465 #define USB_ENDPOINT_USAGE_FEEDBACK 0x10 466 #define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ 467 468 /*-------------------------------------------------------------------------*/ 469 470 /** 471 * usb_endpoint_num - get the endpoint's number 472 * @epd: endpoint to be checked 473 * 474 * Returns @epd's number: 0 to 15. 475 */ 476 static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) 477 { 478 return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; 479 } 480 481 /** 482 * usb_endpoint_type - get the endpoint's transfer type 483 * @epd: endpoint to be checked 484 * 485 * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according 486 * to @epd's transfer type. 487 */ 488 static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) 489 { 490 return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; 491 } 492 493 /** 494 * usb_endpoint_dir_in - check if the endpoint has IN direction 495 * @epd: endpoint to be checked 496 * 497 * Returns true if the endpoint is of type IN, otherwise it returns false. 498 */ 499 static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) 500 { 501 return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); 502 } 503 504 /** 505 * usb_endpoint_dir_out - check if the endpoint has OUT direction 506 * @epd: endpoint to be checked 507 * 508 * Returns true if the endpoint is of type OUT, otherwise it returns false. 509 */ 510 static inline int usb_endpoint_dir_out( 511 const struct usb_endpoint_descriptor *epd) 512 { 513 return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); 514 } 515 516 /** 517 * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type 518 * @epd: endpoint to be checked 519 * 520 * Returns true if the endpoint is of type bulk, otherwise it returns false. 521 */ 522 static inline int usb_endpoint_xfer_bulk( 523 const struct usb_endpoint_descriptor *epd) 524 { 525 return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == 526 USB_ENDPOINT_XFER_BULK); 527 } 528 529 /** 530 * usb_endpoint_xfer_control - check if the endpoint has control transfer type 531 * @epd: endpoint to be checked 532 * 533 * Returns true if the endpoint is of type control, otherwise it returns false. 534 */ 535 static inline int usb_endpoint_xfer_control( 536 const struct usb_endpoint_descriptor *epd) 537 { 538 return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == 539 USB_ENDPOINT_XFER_CONTROL); 540 } 541 542 /** 543 * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type 544 * @epd: endpoint to be checked 545 * 546 * Returns true if the endpoint is of type interrupt, otherwise it returns 547 * false. 548 */ 549 static inline int usb_endpoint_xfer_int( 550 const struct usb_endpoint_descriptor *epd) 551 { 552 return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == 553 USB_ENDPOINT_XFER_INT); 554 } 555 556 /** 557 * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type 558 * @epd: endpoint to be checked 559 * 560 * Returns true if the endpoint is of type isochronous, otherwise it returns 561 * false. 562 */ 563 static inline int usb_endpoint_xfer_isoc( 564 const struct usb_endpoint_descriptor *epd) 565 { 566 return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == 567 USB_ENDPOINT_XFER_ISOC); 568 } 569 570 /** 571 * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN 572 * @epd: endpoint to be checked 573 * 574 * Returns true if the endpoint has bulk transfer type and IN direction, 575 * otherwise it returns false. 576 */ 577 static inline int usb_endpoint_is_bulk_in( 578 const struct usb_endpoint_descriptor *epd) 579 { 580 return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); 581 } 582 583 /** 584 * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT 585 * @epd: endpoint to be checked 586 * 587 * Returns true if the endpoint has bulk transfer type and OUT direction, 588 * otherwise it returns false. 589 */ 590 static inline int usb_endpoint_is_bulk_out( 591 const struct usb_endpoint_descriptor *epd) 592 { 593 return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); 594 } 595 596 /** 597 * usb_endpoint_is_int_in - check if the endpoint is interrupt IN 598 * @epd: endpoint to be checked 599 * 600 * Returns true if the endpoint has interrupt transfer type and IN direction, 601 * otherwise it returns false. 602 */ 603 static inline int usb_endpoint_is_int_in( 604 const struct usb_endpoint_descriptor *epd) 605 { 606 return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); 607 } 608 609 /** 610 * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT 611 * @epd: endpoint to be checked 612 * 613 * Returns true if the endpoint has interrupt transfer type and OUT direction, 614 * otherwise it returns false. 615 */ 616 static inline int usb_endpoint_is_int_out( 617 const struct usb_endpoint_descriptor *epd) 618 { 619 return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); 620 } 621 622 /** 623 * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN 624 * @epd: endpoint to be checked 625 * 626 * Returns true if the endpoint has isochronous transfer type and IN direction, 627 * otherwise it returns false. 628 */ 629 static inline int usb_endpoint_is_isoc_in( 630 const struct usb_endpoint_descriptor *epd) 631 { 632 return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); 633 } 634 635 /** 636 * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT 637 * @epd: endpoint to be checked 638 * 639 * Returns true if the endpoint has isochronous transfer type and OUT direction, 640 * otherwise it returns false. 641 */ 642 static inline int usb_endpoint_is_isoc_out( 643 const struct usb_endpoint_descriptor *epd) 644 { 645 return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); 646 } 647 648 /** 649 * usb_endpoint_maxp - get endpoint's max packet size 650 * @epd: endpoint to be checked 651 * 652 * Returns @epd's max packet bits [10:0] 653 */ 654 static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) 655 { 656 return __le16_to_cpu(epd->wMaxPacketSize) & USB_ENDPOINT_MAXP_MASK; 657 } 658 659 /** 660 * usb_endpoint_maxp_mult - get endpoint's transactional opportunities 661 * @epd: endpoint to be checked 662 * 663 * Return @epd's wMaxPacketSize[12:11] + 1 664 */ 665 static inline int 666 usb_endpoint_maxp_mult(const struct usb_endpoint_descriptor *epd) 667 { 668 int maxp = __le16_to_cpu(epd->wMaxPacketSize); 669 670 return USB_EP_MAXP_MULT(maxp) + 1; 671 } 672 673 static inline int usb_endpoint_interrupt_type( 674 const struct usb_endpoint_descriptor *epd) 675 { 676 return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; 677 } 678 679 /*-------------------------------------------------------------------------*/ 680 681 /* USB_DT_EUSB2_ISOC_ENDPOINT_COMP: eUSB2 Isoch Endpoint Companion descriptor */ 682 struct usb_eusb2_isoc_ep_comp_descriptor { 683 __u8 bLength; 684 __u8 bDescriptorType; 685 __le16 wMaxPacketSize; 686 __le32 dwBytesPerInterval; 687 } __attribute__ ((packed)); 688 689 #define USB_DT_EUSB2_ISOC_EP_COMP_SIZE 8 690 691 /*-------------------------------------------------------------------------*/ 692 693 /* USB_DT_SSP_ISOC_ENDPOINT_COMP: SuperSpeedPlus Isochronous Endpoint Companion 694 * descriptor 695 */ 696 struct usb_ssp_isoc_ep_comp_descriptor { 697 __u8 bLength; 698 __u8 bDescriptorType; 699 __le16 wReseved; 700 __le32 dwBytesPerInterval; 701 } __attribute__ ((packed)); 702 703 #define USB_DT_SSP_ISOC_EP_COMP_SIZE 8 704 705 /*-------------------------------------------------------------------------*/ 706 707 /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ 708 struct usb_ss_ep_comp_descriptor { 709 __u8 bLength; 710 __u8 bDescriptorType; 711 712 __u8 bMaxBurst; 713 __u8 bmAttributes; 714 __le16 wBytesPerInterval; 715 } __attribute__ ((packed)); 716 717 #define USB_DT_SS_EP_COMP_SIZE 6 718 719 /* Bits 4:0 of bmAttributes if this is a bulk endpoint */ 720 static inline int 721 usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) 722 { 723 int max_streams; 724 725 if (!comp) 726 return 0; 727 728 max_streams = comp->bmAttributes & 0x1f; 729 730 if (!max_streams) 731 return 0; 732 733 max_streams = 1 << max_streams; 734 735 return max_streams; 736 } 737 738 /* Bits 1:0 of bmAttributes if this is an isoc endpoint */ 739 #define USB_SS_MULT(p) (1 + ((p) & 0x3)) 740 /* Bit 7 of bmAttributes if a SSP isoc endpoint companion descriptor exists */ 741 #define USB_SS_SSP_ISOC_COMP(p) ((p) & (1 << 7)) 742 743 /*-------------------------------------------------------------------------*/ 744 745 /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ 746 struct usb_qualifier_descriptor { 747 __u8 bLength; 748 __u8 bDescriptorType; 749 750 __le16 bcdUSB; 751 __u8 bDeviceClass; 752 __u8 bDeviceSubClass; 753 __u8 bDeviceProtocol; 754 __u8 bMaxPacketSize0; 755 __u8 bNumConfigurations; 756 __u8 bRESERVED; 757 } __attribute__ ((packed)); 758 759 760 /*-------------------------------------------------------------------------*/ 761 762 /* USB_DT_OTG (from OTG 1.0a supplement) */ 763 struct usb_otg_descriptor { 764 __u8 bLength; 765 __u8 bDescriptorType; 766 767 __u8 bmAttributes; /* support for HNP, SRP, etc */ 768 } __attribute__ ((packed)); 769 770 /* USB_DT_OTG (from OTG 2.0 supplement) */ 771 struct usb_otg20_descriptor { 772 __u8 bLength; 773 __u8 bDescriptorType; 774 775 __u8 bmAttributes; /* support for HNP, SRP and ADP, etc */ 776 __le16 bcdOTG; /* OTG and EH supplement release number 777 * in binary-coded decimal(i.e. 2.0 is 0200H) 778 */ 779 } __attribute__ ((packed)); 780 781 /* from usb_otg_descriptor.bmAttributes */ 782 #define USB_OTG_SRP (1 << 0) 783 #define USB_OTG_HNP (1 << 1) /* swap host/device roles */ 784 #define USB_OTG_ADP (1 << 2) /* support ADP */ 785 /* OTG 3.0 */ 786 #define USB_OTG_RSP (1 << 3) /* support RSP */ 787 788 #define OTG_STS_SELECTOR 0xF000 /* OTG status selector */ 789 /*-------------------------------------------------------------------------*/ 790 791 /* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ 792 struct usb_debug_descriptor { 793 __u8 bLength; 794 __u8 bDescriptorType; 795 796 /* bulk endpoints with 8 byte maxpacket */ 797 __u8 bDebugInEndpoint; 798 __u8 bDebugOutEndpoint; 799 } __attribute__((packed)); 800 801 /*-------------------------------------------------------------------------*/ 802 803 /* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ 804 struct usb_interface_assoc_descriptor { 805 __u8 bLength; 806 __u8 bDescriptorType; 807 808 __u8 bFirstInterface; 809 __u8 bInterfaceCount; 810 __u8 bFunctionClass; 811 __u8 bFunctionSubClass; 812 __u8 bFunctionProtocol; 813 __u8 iFunction; 814 } __attribute__ ((packed)); 815 816 #define USB_DT_INTERFACE_ASSOCIATION_SIZE 8 817 818 /*-------------------------------------------------------------------------*/ 819 820 /* USB_DT_SECURITY: group of wireless security descriptors, including 821 * encryption types available for setting up a CC/association. 822 */ 823 struct usb_security_descriptor { 824 __u8 bLength; 825 __u8 bDescriptorType; 826 827 __le16 wTotalLength; 828 __u8 bNumEncryptionTypes; 829 } __attribute__((packed)); 830 831 /*-------------------------------------------------------------------------*/ 832 833 /* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys 834 * may be retrieved. 835 */ 836 struct usb_key_descriptor { 837 __u8 bLength; 838 __u8 bDescriptorType; 839 840 __u8 tTKID[3]; 841 __u8 bReserved; 842 __u8 bKeyData[]; 843 } __attribute__((packed)); 844 845 /*-------------------------------------------------------------------------*/ 846 847 /* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ 848 struct usb_encryption_descriptor { 849 __u8 bLength; 850 __u8 bDescriptorType; 851 852 __u8 bEncryptionType; 853 #define USB_ENC_TYPE_UNSECURE 0 854 #define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ 855 #define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ 856 #define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ 857 __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ 858 __u8 bAuthKeyIndex; 859 } __attribute__((packed)); 860 861 862 /*-------------------------------------------------------------------------*/ 863 864 /* USB_DT_BOS: group of device-level capabilities */ 865 struct usb_bos_descriptor { 866 __u8 bLength; 867 __u8 bDescriptorType; 868 869 __le16 wTotalLength; 870 __u8 bNumDeviceCaps; 871 } __attribute__((packed)); 872 873 #define USB_DT_BOS_SIZE 5 874 /*-------------------------------------------------------------------------*/ 875 876 /* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ 877 struct usb_dev_cap_header { 878 __u8 bLength; 879 __u8 bDescriptorType; 880 __u8 bDevCapabilityType; 881 } __attribute__((packed)); 882 883 #define USB_CAP_TYPE_WIRELESS_USB 1 884 885 struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ 886 __u8 bLength; 887 __u8 bDescriptorType; 888 __u8 bDevCapabilityType; 889 890 __u8 bmAttributes; 891 #define USB_WIRELESS_P2P_DRD (1 << 1) 892 #define USB_WIRELESS_BEACON_MASK (3 << 2) 893 #define USB_WIRELESS_BEACON_SELF (1 << 2) 894 #define USB_WIRELESS_BEACON_DIRECTED (2 << 2) 895 #define USB_WIRELESS_BEACON_NONE (3 << 2) 896 __le16 wPHYRates; /* bit rates, Mbps */ 897 #define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ 898 #define USB_WIRELESS_PHY_80 (1 << 1) 899 #define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ 900 #define USB_WIRELESS_PHY_160 (1 << 3) 901 #define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ 902 #define USB_WIRELESS_PHY_320 (1 << 5) 903 #define USB_WIRELESS_PHY_400 (1 << 6) 904 #define USB_WIRELESS_PHY_480 (1 << 7) 905 __u8 bmTFITXPowerInfo; /* TFI power levels */ 906 __u8 bmFFITXPowerInfo; /* FFI power levels */ 907 __le16 bmBandGroup; 908 __u8 bReserved; 909 } __attribute__((packed)); 910 911 #define USB_DT_USB_WIRELESS_CAP_SIZE 11 912 913 /* USB 2.0 Extension descriptor */ 914 #define USB_CAP_TYPE_EXT 2 915 916 struct usb_ext_cap_descriptor { /* Link Power Management */ 917 __u8 bLength; 918 __u8 bDescriptorType; 919 __u8 bDevCapabilityType; 920 __le32 bmAttributes; 921 #define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ 922 #define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ 923 #define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ 924 #define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ 925 #define USB_SET_BESL_BASELINE(p) (((p) & 0xf) << 8) 926 #define USB_SET_BESL_DEEP(p) (((p) & 0xf) << 12) 927 #define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) 928 #define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) 929 } __attribute__((packed)); 930 931 #define USB_DT_USB_EXT_CAP_SIZE 7 932 933 /* 934 * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB 935 * specific device level capabilities 936 */ 937 #define USB_SS_CAP_TYPE 3 938 struct usb_ss_cap_descriptor { /* Link Power Management */ 939 __u8 bLength; 940 __u8 bDescriptorType; 941 __u8 bDevCapabilityType; 942 __u8 bmAttributes; 943 #define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ 944 __le16 wSpeedSupported; 945 #define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ 946 #define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ 947 #define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ 948 #define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ 949 __u8 bFunctionalitySupport; 950 __u8 bU1devExitLat; 951 __le16 bU2DevExitLat; 952 } __attribute__((packed)); 953 954 #define USB_DT_USB_SS_CAP_SIZE 10 955 956 /* 957 * Container ID Capability descriptor: Defines the instance unique ID used to 958 * identify the instance across all operating modes 959 */ 960 #define CONTAINER_ID_TYPE 4 961 struct usb_ss_container_id_descriptor { 962 __u8 bLength; 963 __u8 bDescriptorType; 964 __u8 bDevCapabilityType; 965 __u8 bReserved; 966 __u8 ContainerID[16]; /* 128-bit number */ 967 } __attribute__((packed)); 968 969 #define USB_DT_USB_SS_CONTN_ID_SIZE 20 970 971 /* 972 * Platform Device Capability descriptor: Defines platform specific device 973 * capabilities 974 */ 975 #define USB_PLAT_DEV_CAP_TYPE 5 976 struct usb_plat_dev_cap_descriptor { 977 __u8 bLength; 978 __u8 bDescriptorType; 979 __u8 bDevCapabilityType; 980 __u8 bReserved; 981 __u8 UUID[16]; 982 __u8 CapabilityData[]; 983 } __attribute__((packed)); 984 985 #define USB_DT_USB_PLAT_DEV_CAP_SIZE(capability_data_size) (20 + capability_data_size) 986 987 /* 988 * SuperSpeed Plus USB Capability descriptor: Defines the set of 989 * SuperSpeed Plus USB specific device level capabilities 990 */ 991 #define USB_SSP_CAP_TYPE 0xa 992 struct usb_ssp_cap_descriptor { 993 __u8 bLength; 994 __u8 bDescriptorType; 995 __u8 bDevCapabilityType; 996 __u8 bReserved; 997 __le32 bmAttributes; 998 #define USB_SSP_SUBLINK_SPEED_ATTRIBS (0x1f << 0) /* sublink speed entries */ 999 #define USB_SSP_SUBLINK_SPEED_IDS (0xf << 5) /* speed ID entries */ 1000 __le16 wFunctionalitySupport; 1001 #define USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID (0xf) 1002 #define USB_SSP_MIN_RX_LANE_COUNT (0xf << 8) 1003 #define USB_SSP_MIN_TX_LANE_COUNT (0xf << 12) 1004 __le16 wReserved; 1005 union { 1006 __le32 legacy_padding; 1007 /* list of sublink speed attrib entries */ 1008 __DECLARE_FLEX_ARRAY(__le32, bmSublinkSpeedAttr); 1009 }; 1010 #define USB_SSP_SUBLINK_SPEED_SSID (0xf) /* sublink speed ID */ 1011 #define USB_SSP_SUBLINK_SPEED_LSE (0x3 << 4) /* Lanespeed exponent */ 1012 #define USB_SSP_SUBLINK_SPEED_LSE_BPS 0 1013 #define USB_SSP_SUBLINK_SPEED_LSE_KBPS 1 1014 #define USB_SSP_SUBLINK_SPEED_LSE_MBPS 2 1015 #define USB_SSP_SUBLINK_SPEED_LSE_GBPS 3 1016 1017 #define USB_SSP_SUBLINK_SPEED_ST (0x3 << 6) /* Sublink type */ 1018 #define USB_SSP_SUBLINK_SPEED_ST_SYM_RX 0 1019 #define USB_SSP_SUBLINK_SPEED_ST_ASYM_RX 1 1020 #define USB_SSP_SUBLINK_SPEED_ST_SYM_TX 2 1021 #define USB_SSP_SUBLINK_SPEED_ST_ASYM_TX 3 1022 1023 #define USB_SSP_SUBLINK_SPEED_RSVD (0x3f << 8) /* Reserved */ 1024 #define USB_SSP_SUBLINK_SPEED_LP (0x3 << 14) /* Link protocol */ 1025 #define USB_SSP_SUBLINK_SPEED_LP_SS 0 1026 #define USB_SSP_SUBLINK_SPEED_LP_SSP 1 1027 1028 #define USB_SSP_SUBLINK_SPEED_LSM (0xff << 16) /* Lanespeed mantissa */ 1029 } __attribute__((packed)); 1030 1031 /* 1032 * USB Power Delivery Capability Descriptor: 1033 * Defines capabilities for PD 1034 */ 1035 /* Defines the various PD Capabilities of this device */ 1036 #define USB_PD_POWER_DELIVERY_CAPABILITY 0x06 1037 /* Provides information on each battery supported by the device */ 1038 #define USB_PD_BATTERY_INFO_CAPABILITY 0x07 1039 /* The Consumer characteristics of a Port on the device */ 1040 #define USB_PD_PD_CONSUMER_PORT_CAPABILITY 0x08 1041 /* The provider characteristics of a Port on the device */ 1042 #define USB_PD_PD_PROVIDER_PORT_CAPABILITY 0x09 1043 1044 struct usb_pd_cap_descriptor { 1045 __u8 bLength; 1046 __u8 bDescriptorType; 1047 __u8 bDevCapabilityType; /* set to USB_PD_POWER_DELIVERY_CAPABILITY */ 1048 __u8 bReserved; 1049 __le32 bmAttributes; 1050 #define USB_PD_CAP_BATTERY_CHARGING (1 << 1) /* supports Battery Charging specification */ 1051 #define USB_PD_CAP_USB_PD (1 << 2) /* supports USB Power Delivery specification */ 1052 #define USB_PD_CAP_PROVIDER (1 << 3) /* can provide power */ 1053 #define USB_PD_CAP_CONSUMER (1 << 4) /* can consume power */ 1054 #define USB_PD_CAP_CHARGING_POLICY (1 << 5) /* supports CHARGING_POLICY feature */ 1055 #define USB_PD_CAP_TYPE_C_CURRENT (1 << 6) /* supports power capabilities defined in the USB Type-C Specification */ 1056 1057 #define USB_PD_CAP_PWR_AC (1 << 8) 1058 #define USB_PD_CAP_PWR_BAT (1 << 9) 1059 #define USB_PD_CAP_PWR_USE_V_BUS (1 << 14) 1060 1061 __le16 bmProviderPorts; /* Bit zero refers to the UFP of the device */ 1062 __le16 bmConsumerPorts; 1063 __le16 bcdBCVersion; 1064 __le16 bcdPDVersion; 1065 __le16 bcdUSBTypeCVersion; 1066 } __attribute__((packed)); 1067 1068 struct usb_pd_cap_battery_info_descriptor { 1069 __u8 bLength; 1070 __u8 bDescriptorType; 1071 __u8 bDevCapabilityType; 1072 /* Index of string descriptor shall contain the user friendly name for this battery */ 1073 __u8 iBattery; 1074 /* Index of string descriptor shall contain the Serial Number String for this battery */ 1075 __u8 iSerial; 1076 __u8 iManufacturer; 1077 __u8 bBatteryId; /* uniquely identifies this battery in status Messages */ 1078 __u8 bReserved; 1079 /* 1080 * Shall contain the Battery Charge value above which this 1081 * battery is considered to be fully charged but not necessarily 1082 * “topped off.” 1083 */ 1084 __le32 dwChargedThreshold; /* in mWh */ 1085 /* 1086 * Shall contain the minimum charge level of this battery such 1087 * that above this threshold, a device can be assured of being 1088 * able to power up successfully (see Battery Charging 1.2). 1089 */ 1090 __le32 dwWeakThreshold; /* in mWh */ 1091 __le32 dwBatteryDesignCapacity; /* in mWh */ 1092 __le32 dwBatteryLastFullchargeCapacity; /* in mWh */ 1093 } __attribute__((packed)); 1094 1095 struct usb_pd_cap_consumer_port_descriptor { 1096 __u8 bLength; 1097 __u8 bDescriptorType; 1098 __u8 bDevCapabilityType; 1099 __u8 bReserved; 1100 __u8 bmCapabilities; 1101 /* port will oerate under: */ 1102 #define USB_PD_CAP_CONSUMER_BC (1 << 0) /* BC */ 1103 #define USB_PD_CAP_CONSUMER_PD (1 << 1) /* PD */ 1104 #define USB_PD_CAP_CONSUMER_TYPE_C (1 << 2) /* USB Type-C Current */ 1105 __le16 wMinVoltage; /* in 50mV units */ 1106 __le16 wMaxVoltage; /* in 50mV units */ 1107 __u16 wReserved; 1108 __le32 dwMaxOperatingPower; /* in 10 mW - operating at steady state */ 1109 __le32 dwMaxPeakPower; /* in 10mW units - operating at peak power */ 1110 __le32 dwMaxPeakPowerTime; /* in 100ms units - duration of peak */ 1111 #define USB_PD_CAP_CONSUMER_UNKNOWN_PEAK_POWER_TIME 0xffff 1112 } __attribute__((packed)); 1113 1114 struct usb_pd_cap_provider_port_descriptor { 1115 __u8 bLength; 1116 __u8 bDescriptorType; 1117 __u8 bDevCapabilityType; 1118 __u8 bReserved1; 1119 __u8 bmCapabilities; 1120 /* port will oerate under: */ 1121 #define USB_PD_CAP_PROVIDER_BC (1 << 0) /* BC */ 1122 #define USB_PD_CAP_PROVIDER_PD (1 << 1) /* PD */ 1123 #define USB_PD_CAP_PROVIDER_TYPE_C (1 << 2) /* USB Type-C Current */ 1124 __u8 bNumOfPDObjects; 1125 __u8 bReserved2; 1126 __le32 wPowerDataObject[]; 1127 } __attribute__((packed)); 1128 1129 /* 1130 * Precision time measurement capability descriptor: advertised by devices and 1131 * hubs that support PTM 1132 */ 1133 #define USB_PTM_CAP_TYPE 0xb 1134 struct usb_ptm_cap_descriptor { 1135 __u8 bLength; 1136 __u8 bDescriptorType; 1137 __u8 bDevCapabilityType; 1138 } __attribute__((packed)); 1139 1140 #define USB_DT_USB_PTM_ID_SIZE 3 1141 /* 1142 * The size of the descriptor for the Sublink Speed Attribute Count 1143 * (SSAC) specified in bmAttributes[4:0]. SSAC is zero-based 1144 */ 1145 #define USB_DT_USB_SSP_CAP_SIZE(ssac) (12 + (ssac + 1) * 4) 1146 1147 /*-------------------------------------------------------------------------*/ 1148 1149 /* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with 1150 * each endpoint descriptor for a wireless device 1151 */ 1152 struct usb_wireless_ep_comp_descriptor { 1153 __u8 bLength; 1154 __u8 bDescriptorType; 1155 1156 __u8 bMaxBurst; 1157 __u8 bMaxSequence; 1158 __le16 wMaxStreamDelay; 1159 __le16 wOverTheAirPacketSize; 1160 __u8 bOverTheAirInterval; 1161 __u8 bmCompAttributes; 1162 #define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ 1163 #define USB_ENDPOINT_SWITCH_NO 0 1164 #define USB_ENDPOINT_SWITCH_SWITCH 1 1165 #define USB_ENDPOINT_SWITCH_SCALE 2 1166 } __attribute__((packed)); 1167 1168 /*-------------------------------------------------------------------------*/ 1169 1170 /* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless 1171 * host and a device for connection set up, mutual authentication, and 1172 * exchanging short lived session keys. The handshake depends on a CC. 1173 */ 1174 struct usb_handshake { 1175 __u8 bMessageNumber; 1176 __u8 bStatus; 1177 __u8 tTKID[3]; 1178 __u8 bReserved; 1179 __u8 CDID[16]; 1180 __u8 nonce[16]; 1181 __u8 MIC[8]; 1182 } __attribute__((packed)); 1183 1184 /*-------------------------------------------------------------------------*/ 1185 1186 /* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). 1187 * A CC may also be set up using non-wireless secure channels (including 1188 * wired USB!), and some devices may support CCs with multiple hosts. 1189 */ 1190 struct usb_connection_context { 1191 __u8 CHID[16]; /* persistent host id */ 1192 __u8 CDID[16]; /* device id (unique w/in host context) */ 1193 __u8 CK[16]; /* connection key */ 1194 } __attribute__((packed)); 1195 1196 /*-------------------------------------------------------------------------*/ 1197 1198 /* USB 2.0 defines three speeds, here's how Linux identifies them */ 1199 1200 enum usb_device_speed { 1201 USB_SPEED_UNKNOWN = 0, /* enumerating */ 1202 USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ 1203 USB_SPEED_HIGH, /* usb 2.0 */ 1204 USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ 1205 USB_SPEED_SUPER, /* usb 3.0 */ 1206 USB_SPEED_SUPER_PLUS, /* usb 3.1 */ 1207 }; 1208 1209 1210 enum usb_device_state { 1211 /* NOTATTACHED isn't in the USB spec, and this state acts 1212 * the same as ATTACHED ... but it's clearer this way. 1213 */ 1214 USB_STATE_NOTATTACHED = 0, 1215 1216 /* chapter 9 and authentication (wireless) device states */ 1217 USB_STATE_ATTACHED, 1218 USB_STATE_POWERED, /* wired */ 1219 USB_STATE_RECONNECTING, /* auth */ 1220 USB_STATE_UNAUTHENTICATED, /* auth */ 1221 USB_STATE_DEFAULT, /* limited function */ 1222 USB_STATE_ADDRESS, 1223 USB_STATE_CONFIGURED, /* most functions */ 1224 1225 USB_STATE_SUSPENDED 1226 1227 /* NOTE: there are actually four different SUSPENDED 1228 * states, returning to POWERED, DEFAULT, ADDRESS, or 1229 * CONFIGURED respectively when SOF tokens flow again. 1230 * At this level there's no difference between L1 and L2 1231 * suspend states. (L2 being original USB 1.1 suspend.) 1232 */ 1233 }; 1234 1235 enum usb3_link_state { 1236 USB3_LPM_U0 = 0, 1237 USB3_LPM_U1, 1238 USB3_LPM_U2, 1239 USB3_LPM_U3 1240 }; 1241 1242 /* 1243 * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. 1244 * 0xff means the parent hub will accept transitions to U1, but will not 1245 * initiate a transition. 1246 * 1247 * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to 1248 * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved 1249 * values. 1250 * 1251 * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. 1252 * 0xff means the parent hub will accept transitions to U2, but will not 1253 * initiate a transition. 1254 * 1255 * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to 1256 * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 1257 * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means 1258 * 65.024ms. 1259 */ 1260 #define USB3_LPM_DISABLED 0x0 1261 #define USB3_LPM_U1_MAX_TIMEOUT 0x7F 1262 #define USB3_LPM_U2_MAX_TIMEOUT 0xFE 1263 #define USB3_LPM_DEVICE_INITIATED 0xFF 1264 1265 struct usb_set_sel_req { 1266 __u8 u1_sel; 1267 __u8 u1_pel; 1268 __le16 u2_sel; 1269 __le16 u2_pel; 1270 } __attribute__ ((packed)); 1271 1272 /* 1273 * The Set System Exit Latency control transfer provides one byte each for 1274 * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each 1275 * are two bytes long. 1276 */ 1277 #define USB3_LPM_MAX_U1_SEL_PEL 0xFF 1278 #define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF 1279 1280 /*-------------------------------------------------------------------------*/ 1281 1282 /* 1283 * As per USB compliance update, a device that is actively drawing 1284 * more than 100mA from USB must report itself as bus-powered in 1285 * the GetStatus(DEVICE) call. 1286 * https://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 1287 */ 1288 #define USB_SELF_POWER_VBUS_MAX_DRAW 100 1289 1290 #endif /* _UAPI__LINUX_USB_CH9_H */ 1291