1 /* 2 * This file define a set of standard wireless extensions 3 * 4 * Version : 22 16.3.07 5 * 6 * Authors : Jean Tourrilhes - HPL - <[email protected]> 7 * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. 8 */ 9 10 #ifndef _LINUX_WIRELESS_H 11 #define _LINUX_WIRELESS_H 12 13 /************************** DOCUMENTATION **************************/ 14 /* 15 * Initial APIs (1996 -> onward) : 16 * ----------------------------- 17 * Basically, the wireless extensions are for now a set of standard ioctl 18 * call + /proc/net/wireless 19 * 20 * The entry /proc/net/wireless give statistics and information on the 21 * driver. 22 * This is better than having each driver having its entry because 23 * its centralised and we may remove the driver module safely. 24 * 25 * Ioctl are used to configure the driver and issue commands. This is 26 * better than command line options of insmod because we may want to 27 * change dynamically (while the driver is running) some parameters. 28 * 29 * The ioctl mechanimsm are copied from standard devices ioctl. 30 * We have the list of command plus a structure descibing the 31 * data exchanged... 32 * Note that to add these ioctl, I was obliged to modify : 33 * # net/core/dev.c (two place + add include) 34 * # net/ipv4/af_inet.c (one place + add include) 35 * 36 * /proc/net/wireless is a copy of /proc/net/dev. 37 * We have a structure for data passed from the driver to /proc/net/wireless 38 * Too add this, I've modified : 39 * # net/core/dev.c (two other places) 40 * # include/linux/netdevice.h (one place) 41 * # include/linux/proc_fs.h (one place) 42 * 43 * New driver API (2002 -> onward) : 44 * ------------------------------- 45 * This file is only concerned with the user space API and common definitions. 46 * The new driver API is defined and documented in : 47 * # include/net/iw_handler.h 48 * 49 * Note as well that /proc/net/wireless implementation has now moved in : 50 * # net/core/wireless.c 51 * 52 * Wireless Events (2002 -> onward) : 53 * -------------------------------- 54 * Events are defined at the end of this file, and implemented in : 55 * # net/core/wireless.c 56 * 57 * Other comments : 58 * -------------- 59 * Do not add here things that are redundant with other mechanisms 60 * (drivers init, ifconfig, /proc/net/dev, ...) and with are not 61 * wireless specific. 62 * 63 * These wireless extensions are not magic : each driver has to provide 64 * support for them... 65 * 66 * IMPORTANT NOTE : As everything in the kernel, this is very much a 67 * work in progress. Contact me if you have ideas of improvements... 68 */ 69 70 /***************************** INCLUDES *****************************/ 71 72 /* This header is used in user-space, therefore need to be sanitised 73 * for that purpose. Those includes are usually not compatible with glibc. 74 * To know which includes to use in user-space, check iwlib.h. */ 75 #ifdef __KERNEL__ 76 #include <linux/types.h> /* for "caddr_t" et al */ 77 #include <linux/socket.h> /* for "struct sockaddr" et al */ 78 #include <linux/if.h> /* for IFNAMSIZ and co... */ 79 #endif /* __KERNEL__ */ 80 81 /***************************** VERSION *****************************/ 82 /* 83 * This constant is used to know the availability of the wireless 84 * extensions and to know which version of wireless extensions it is 85 * (there is some stuff that will be added in the future...) 86 * I just plan to increment with each new version. 87 */ 88 #define WIRELESS_EXT 22 89 90 /* 91 * Changes : 92 * 93 * V2 to V3 94 * -------- 95 * Alan Cox start some incompatibles changes. I've integrated a bit more. 96 * - Encryption renamed to Encode to avoid US regulation problems 97 * - Frequency changed from float to struct to avoid problems on old 386 98 * 99 * V3 to V4 100 * -------- 101 * - Add sensitivity 102 * 103 * V4 to V5 104 * -------- 105 * - Missing encoding definitions in range 106 * - Access points stuff 107 * 108 * V5 to V6 109 * -------- 110 * - 802.11 support (ESSID ioctls) 111 * 112 * V6 to V7 113 * -------- 114 * - define IW_ESSID_MAX_SIZE and IW_MAX_AP 115 * 116 * V7 to V8 117 * -------- 118 * - Changed my e-mail address 119 * - More 802.11 support (nickname, rate, rts, frag) 120 * - List index in frequencies 121 * 122 * V8 to V9 123 * -------- 124 * - Support for 'mode of operation' (ad-hoc, managed...) 125 * - Support for unicast and multicast power saving 126 * - Change encoding to support larger tokens (>64 bits) 127 * - Updated iw_params (disable, flags) and use it for NWID 128 * - Extracted iw_point from iwreq for clarity 129 * 130 * V9 to V10 131 * --------- 132 * - Add PM capability to range structure 133 * - Add PM modifier : MAX/MIN/RELATIVE 134 * - Add encoding option : IW_ENCODE_NOKEY 135 * - Add TxPower ioctls (work like TxRate) 136 * 137 * V10 to V11 138 * ---------- 139 * - Add WE version in range (help backward/forward compatibility) 140 * - Add retry ioctls (work like PM) 141 * 142 * V11 to V12 143 * ---------- 144 * - Add SIOCSIWSTATS to get /proc/net/wireless programatically 145 * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space 146 * - Add new statistics (frag, retry, beacon) 147 * - Add average quality (for user space calibration) 148 * 149 * V12 to V13 150 * ---------- 151 * - Document creation of new driver API. 152 * - Extract union iwreq_data from struct iwreq (for new driver API). 153 * - Rename SIOCSIWNAME as SIOCSIWCOMMIT 154 * 155 * V13 to V14 156 * ---------- 157 * - Wireless Events support : define struct iw_event 158 * - Define additional specific event numbers 159 * - Add "addr" and "param" fields in union iwreq_data 160 * - AP scanning stuff (SIOCSIWSCAN and friends) 161 * 162 * V14 to V15 163 * ---------- 164 * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg 165 * - Make struct iw_freq signed (both m & e), add explicit padding 166 * - Add IWEVCUSTOM for driver specific event/scanning token 167 * - Add IW_MAX_GET_SPY for driver returning a lot of addresses 168 * - Add IW_TXPOW_RANGE for range of Tx Powers 169 * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points 170 * - Add IW_MODE_MONITOR for passive monitor 171 * 172 * V15 to V16 173 * ---------- 174 * - Increase the number of bitrates in iw_range to 32 (for 802.11g) 175 * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) 176 * - Reshuffle struct iw_range for increases, add filler 177 * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses 178 * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support 179 * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" 180 * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index 181 * 182 * V16 to V17 183 * ---------- 184 * - Add flags to frequency -> auto/fixed 185 * - Document (struct iw_quality *)->updated, add new flags (INVALID) 186 * - Wireless Event capability in struct iw_range 187 * - Add support for relative TxPower (yick !) 188 * 189 * V17 to V18 (From Jouni Malinen <[email protected]>) 190 * ---------- 191 * - Add support for WPA/WPA2 192 * - Add extended encoding configuration (SIOCSIWENCODEEXT and 193 * SIOCGIWENCODEEXT) 194 * - Add SIOCSIWGENIE/SIOCGIWGENIE 195 * - Add SIOCSIWMLME 196 * - Add SIOCSIWPMKSA 197 * - Add struct iw_range bit field for supported encoding capabilities 198 * - Add optional scan request parameters for SIOCSIWSCAN 199 * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA 200 * related parameters (extensible up to 4096 parameter values) 201 * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, 202 * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND 203 * 204 * V18 to V19 205 * ---------- 206 * - Remove (struct iw_point *)->pointer from events and streams 207 * - Remove header includes to help user space 208 * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 209 * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros 210 * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM 211 * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros 212 * 213 * V19 to V20 214 * ---------- 215 * - RtNetlink requests support (SET/GET) 216 * 217 * V20 to V21 218 * ---------- 219 * - Remove (struct net_device *)->get_wireless_stats() 220 * - Change length in ESSID and NICK to strlen() instead of strlen()+1 221 * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers 222 * - Power/Retry relative values no longer * 100000 223 * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI 224 * 225 * V21 to V22 226 * ---------- 227 * - Prevent leaking of kernel space in stream on 64 bits. 228 */ 229 230 /**************************** CONSTANTS ****************************/ 231 232 /* -------------------------- IOCTL LIST -------------------------- */ 233 234 /* Wireless Identification */ 235 #define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ 236 #define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ 237 /* SIOCGIWNAME is used to verify the presence of Wireless Extensions. 238 * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... 239 * Don't put the name of your driver there, it's useless. */ 240 241 /* Basic operations */ 242 #define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ 243 #define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ 244 #define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ 245 #define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ 246 #define SIOCSIWMODE 0x8B06 /* set operation mode */ 247 #define SIOCGIWMODE 0x8B07 /* get operation mode */ 248 #define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ 249 #define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ 250 251 /* Informative stuff */ 252 #define SIOCSIWRANGE 0x8B0A /* Unused */ 253 #define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ 254 #define SIOCSIWPRIV 0x8B0C /* Unused */ 255 #define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ 256 #define SIOCSIWSTATS 0x8B0E /* Unused */ 257 #define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ 258 /* SIOCGIWSTATS is strictly used between user space and the kernel, and 259 * is never passed to the driver (i.e. the driver will never see it). */ 260 261 /* Spy support (statistics per MAC address - used for Mobile IP support) */ 262 #define SIOCSIWSPY 0x8B10 /* set spy addresses */ 263 #define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ 264 #define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ 265 #define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ 266 267 /* Access Point manipulation */ 268 #define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ 269 #define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ 270 #define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ 271 #define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ 272 #define SIOCGIWSCAN 0x8B19 /* get scanning results */ 273 274 /* 802.11 specific support */ 275 #define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ 276 #define SIOCGIWESSID 0x8B1B /* get ESSID */ 277 #define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ 278 #define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ 279 /* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit 280 * within the 'iwreq' structure, so we need to use the 'data' member to 281 * point to a string in user space, like it is done for RANGE... */ 282 283 /* Other parameters useful in 802.11 and some other devices */ 284 #define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ 285 #define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ 286 #define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ 287 #define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ 288 #define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ 289 #define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ 290 #define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ 291 #define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ 292 #define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ 293 #define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ 294 295 /* Encoding stuff (scrambling, hardware security, WEP...) */ 296 #define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ 297 #define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ 298 /* Power saving stuff (power management, unicast and multicast) */ 299 #define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ 300 #define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ 301 302 /* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). 303 * This ioctl uses struct iw_point and data buffer that includes IE id and len 304 * fields. More than one IE may be included in the request. Setting the generic 305 * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers 306 * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers 307 * are required to report the used IE as a wireless event, e.g., when 308 * associating with an AP. */ 309 #define SIOCSIWGENIE 0x8B30 /* set generic IE */ 310 #define SIOCGIWGENIE 0x8B31 /* get generic IE */ 311 312 /* WPA : IEEE 802.11 MLME requests */ 313 #define SIOCSIWMLME 0x8B16 /* request MLME operation; uses 314 * struct iw_mlme */ 315 /* WPA : Authentication mode parameters */ 316 #define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ 317 #define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ 318 319 /* WPA : Extended version of encoding configuration */ 320 #define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ 321 #define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ 322 323 /* WPA2 : PMKSA cache management */ 324 #define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ 325 326 /* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ 327 328 /* These 32 ioctl are wireless device private, for 16 commands. 329 * Each driver is free to use them for whatever purpose it chooses, 330 * however the driver *must* export the description of those ioctls 331 * with SIOCGIWPRIV and *must* use arguments as defined below. 332 * If you don't follow those rules, DaveM is going to hate you (reason : 333 * it make mixed 32/64bit operation impossible). 334 */ 335 #define SIOCIWFIRSTPRIV 0x8BE0 336 #define SIOCIWLASTPRIV 0x8BFF 337 /* Previously, we were using SIOCDEVPRIVATE, but we now have our 338 * separate range because of collisions with other tools such as 339 * 'mii-tool'. 340 * We now have 32 commands, so a bit more space ;-). 341 * Also, all 'even' commands are only usable by root and don't return the 342 * content of ifr/iwr to user (but you are not obliged to use the set/get 343 * convention, just use every other two command). More details in iwpriv.c. 344 * And I repeat : you are not forced to use them with iwpriv, but you 345 * must be compliant with it. 346 */ 347 348 /* ------------------------- IOCTL STUFF ------------------------- */ 349 350 /* The first and the last (range) */ 351 #define SIOCIWFIRST 0x8B00 352 #define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ 353 #define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) 354 355 /* Odd : get (world access), even : set (root access) */ 356 #define IW_IS_SET(cmd) (!((cmd) & 0x1)) 357 #define IW_IS_GET(cmd) ((cmd) & 0x1) 358 359 /* ----------------------- WIRELESS EVENTS ----------------------- */ 360 /* Those are *NOT* ioctls, do not issue request on them !!! */ 361 /* Most events use the same identifier as ioctl requests */ 362 363 #define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ 364 #define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ 365 #define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ 366 #define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ 367 #define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ 368 #define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) 369 * (scan results); This includes id and 370 * length fields. One IWEVGENIE may 371 * contain more than one IE. Scan 372 * results may contain one or more 373 * IWEVGENIE events. */ 374 #define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure 375 * (struct iw_michaelmicfailure) 376 */ 377 #define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. 378 * The data includes id and length 379 * fields and may contain more than one 380 * IE. This event is required in 381 * Managed mode if the driver 382 * generates its own WPA/RSN IE. This 383 * should be sent just before 384 * IWEVREGISTERED event for the 385 * association. */ 386 #define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association 387 * Response. The data includes id and 388 * length fields and may contain more 389 * than one IE. This may be sent 390 * between IWEVASSOCREQIE and 391 * IWEVREGISTERED events for the 392 * association. */ 393 #define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN 394 * pre-authentication 395 * (struct iw_pmkid_cand) */ 396 397 #define IWEVFIRST 0x8C00 398 #define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) 399 400 /* ------------------------- PRIVATE INFO ------------------------- */ 401 /* 402 * The following is used with SIOCGIWPRIV. It allow a driver to define 403 * the interface (name, type of data) for its private ioctl. 404 * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV 405 */ 406 407 #define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ 408 #define IW_PRIV_TYPE_NONE 0x0000 409 #define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ 410 #define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ 411 #define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ 412 #define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ 413 #define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ 414 415 #define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ 416 417 #define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ 418 419 /* 420 * Note : if the number of args is fixed and the size < 16 octets, 421 * instead of passing a pointer we will put args in the iwreq struct... 422 */ 423 424 /* ----------------------- OTHER CONSTANTS ----------------------- */ 425 426 /* Maximum frequencies in the range struct */ 427 #define IW_MAX_FREQUENCIES 32 428 /* Note : if you have something like 80 frequencies, 429 * don't increase this constant and don't fill the frequency list. 430 * The user will be able to set by channel anyway... */ 431 432 /* Maximum bit rates in the range struct */ 433 #define IW_MAX_BITRATES 32 434 435 /* Maximum tx powers in the range struct */ 436 #define IW_MAX_TXPOWER 8 437 /* Note : if you more than 8 TXPowers, just set the max and min or 438 * a few of them in the struct iw_range. */ 439 440 /* Maximum of address that you may set with SPY */ 441 #define IW_MAX_SPY 8 442 443 /* Maximum of address that you may get in the 444 list of access points in range */ 445 #define IW_MAX_AP 64 446 447 /* Maximum size of the ESSID and NICKN strings */ 448 #define IW_ESSID_MAX_SIZE 32 449 450 /* Modes of operation */ 451 #define IW_MODE_AUTO 0 /* Let the driver decides */ 452 #define IW_MODE_ADHOC 1 /* Single cell network */ 453 #define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ 454 #define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ 455 #define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ 456 #define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ 457 #define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ 458 459 /* Statistics flags (bitmask in updated) */ 460 #define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ 461 #define IW_QUAL_LEVEL_UPDATED 0x02 462 #define IW_QUAL_NOISE_UPDATED 0x04 463 #define IW_QUAL_ALL_UPDATED 0x07 464 #define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ 465 #define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ 466 #define IW_QUAL_LEVEL_INVALID 0x20 467 #define IW_QUAL_NOISE_INVALID 0x40 468 #define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ 469 #define IW_QUAL_ALL_INVALID 0x70 470 471 /* Frequency flags */ 472 #define IW_FREQ_AUTO 0x00 /* Let the driver decides */ 473 #define IW_FREQ_FIXED 0x01 /* Force a specific value */ 474 475 /* Maximum number of size of encoding token available 476 * they are listed in the range structure */ 477 #define IW_MAX_ENCODING_SIZES 8 478 479 /* Maximum size of the encoding token in bytes */ 480 #define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ 481 482 /* Flags for encoding (along with the token) */ 483 #define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ 484 #define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ 485 #define IW_ENCODE_MODE 0xF000 /* Modes defined below */ 486 #define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ 487 #define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ 488 #define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ 489 #define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ 490 #define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ 491 #define IW_ENCODE_TEMP 0x0400 /* Temporary key */ 492 493 /* Power management flags available (along with the value, if any) */ 494 #define IW_POWER_ON 0x0000 /* No details... */ 495 #define IW_POWER_TYPE 0xF000 /* Type of parameter */ 496 #define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ 497 #define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ 498 #define IW_POWER_MODE 0x0F00 /* Power Management mode */ 499 #define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ 500 #define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ 501 #define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ 502 #define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ 503 #define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ 504 #define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ 505 #define IW_POWER_MIN 0x0001 /* Value is a minimum */ 506 #define IW_POWER_MAX 0x0002 /* Value is a maximum */ 507 #define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 508 509 /* Transmit Power flags available */ 510 #define IW_TXPOW_TYPE 0x00FF /* Type of value */ 511 #define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ 512 #define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ 513 #define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ 514 #define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ 515 516 /* Retry limits and lifetime flags available */ 517 #define IW_RETRY_ON 0x0000 /* No details... */ 518 #define IW_RETRY_TYPE 0xF000 /* Type of parameter */ 519 #define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ 520 #define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ 521 #define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ 522 #define IW_RETRY_MIN 0x0001 /* Value is a minimum */ 523 #define IW_RETRY_MAX 0x0002 /* Value is a maximum */ 524 #define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 525 #define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ 526 #define IW_RETRY_LONG 0x0020 /* Value is for long packets */ 527 528 /* Scanning request flags */ 529 #define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ 530 #define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ 531 #define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ 532 #define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ 533 #define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ 534 #define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ 535 #define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ 536 #define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ 537 #define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ 538 /* struct iw_scan_req scan_type */ 539 #define IW_SCAN_TYPE_ACTIVE 0 540 #define IW_SCAN_TYPE_PASSIVE 1 541 /* Maximum size of returned data */ 542 #define IW_SCAN_MAX_DATA 4096 /* In bytes */ 543 544 /* Max number of char in custom event - use multiple of them if needed */ 545 #define IW_CUSTOM_MAX 256 /* In bytes */ 546 547 /* Generic information element */ 548 #define IW_GENERIC_IE_MAX 1024 549 550 /* MLME requests (SIOCSIWMLME / struct iw_mlme) */ 551 #define IW_MLME_DEAUTH 0 552 #define IW_MLME_DISASSOC 1 553 #define IW_MLME_AUTH 2 554 #define IW_MLME_ASSOC 3 555 556 /* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ 557 #define IW_AUTH_INDEX 0x0FFF 558 #define IW_AUTH_FLAGS 0xF000 559 /* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) 560 * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the 561 * parameter that is being set/get to; value will be read/written to 562 * struct iw_param value field) */ 563 #define IW_AUTH_WPA_VERSION 0 564 #define IW_AUTH_CIPHER_PAIRWISE 1 565 #define IW_AUTH_CIPHER_GROUP 2 566 #define IW_AUTH_KEY_MGMT 3 567 #define IW_AUTH_TKIP_COUNTERMEASURES 4 568 #define IW_AUTH_DROP_UNENCRYPTED 5 569 #define IW_AUTH_80211_AUTH_ALG 6 570 #define IW_AUTH_WPA_ENABLED 7 571 #define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 572 #define IW_AUTH_ROAMING_CONTROL 9 573 #define IW_AUTH_PRIVACY_INVOKED 10 574 575 /* IW_AUTH_WPA_VERSION values (bit field) */ 576 #define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 577 #define IW_AUTH_WPA_VERSION_WPA 0x00000002 578 #define IW_AUTH_WPA_VERSION_WPA2 0x00000004 579 580 /* IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values (bit field) */ 581 #define IW_AUTH_CIPHER_NONE 0x00000001 582 #define IW_AUTH_CIPHER_WEP40 0x00000002 583 #define IW_AUTH_CIPHER_TKIP 0x00000004 584 #define IW_AUTH_CIPHER_CCMP 0x00000008 585 #define IW_AUTH_CIPHER_WEP104 0x00000010 586 587 /* IW_AUTH_KEY_MGMT values (bit field) */ 588 #define IW_AUTH_KEY_MGMT_802_1X 1 589 #define IW_AUTH_KEY_MGMT_PSK 2 590 591 /* IW_AUTH_80211_AUTH_ALG values (bit field) */ 592 #define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 593 #define IW_AUTH_ALG_SHARED_KEY 0x00000002 594 #define IW_AUTH_ALG_LEAP 0x00000004 595 596 /* IW_AUTH_ROAMING_CONTROL values */ 597 #define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ 598 #define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming 599 * control */ 600 601 /* SIOCSIWENCODEEXT definitions */ 602 #define IW_ENCODE_SEQ_MAX_SIZE 8 603 /* struct iw_encode_ext ->alg */ 604 #define IW_ENCODE_ALG_NONE 0 605 #define IW_ENCODE_ALG_WEP 1 606 #define IW_ENCODE_ALG_TKIP 2 607 #define IW_ENCODE_ALG_CCMP 3 608 /* struct iw_encode_ext ->ext_flags */ 609 #define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 610 #define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 611 #define IW_ENCODE_EXT_GROUP_KEY 0x00000004 612 #define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 613 614 /* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ 615 #define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ 616 #define IW_MICFAILURE_GROUP 0x00000004 617 #define IW_MICFAILURE_PAIRWISE 0x00000008 618 #define IW_MICFAILURE_STAKEY 0x00000010 619 #define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) 620 */ 621 622 /* Bit field values for enc_capa in struct iw_range */ 623 #define IW_ENC_CAPA_WPA 0x00000001 624 #define IW_ENC_CAPA_WPA2 0x00000002 625 #define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 626 #define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 627 628 /* Event capability macros - in (struct iw_range *)->event_capa 629 * Because we have more than 32 possible events, we use an array of 630 * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ 631 #define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ 632 (cmd - SIOCIWFIRSTPRIV + 0x60) : \ 633 (cmd - SIOCSIWCOMMIT)) 634 #define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) 635 #define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) 636 /* Event capability constants - event autogenerated by the kernel 637 * This list is valid for most 802.11 devices, customise as needed... */ 638 #define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ 639 IW_EVENT_CAPA_MASK(0x8B06) | \ 640 IW_EVENT_CAPA_MASK(0x8B1A)) 641 #define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) 642 /* "Easy" macro to set events in iw_range (less efficient) */ 643 #define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) 644 #define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } 645 646 647 /****************************** TYPES ******************************/ 648 649 /* --------------------------- SUBTYPES --------------------------- */ 650 /* 651 * Generic format for most parameters that fit in an int 652 */ 653 struct iw_param 654 { 655 __s32 value; /* The value of the parameter itself */ 656 __u8 fixed; /* Hardware should not use auto select */ 657 __u8 disabled; /* Disable the feature */ 658 __u16 flags; /* Various specifc flags (if any) */ 659 }; 660 661 /* 662 * For all data larger than 16 octets, we need to use a 663 * pointer to memory allocated in user space. 664 */ 665 struct iw_point 666 { 667 void __user *pointer; /* Pointer to the data (in user space) */ 668 __u16 length; /* number of fields or size in bytes */ 669 __u16 flags; /* Optional params */ 670 }; 671 672 /* 673 * A frequency 674 * For numbers lower than 10^9, we encode the number in 'm' and 675 * set 'e' to 0 676 * For number greater than 10^9, we divide it by the lowest power 677 * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... 678 * The power of 10 is in 'e', the result of the division is in 'm'. 679 */ 680 struct iw_freq 681 { 682 __s32 m; /* Mantissa */ 683 __s16 e; /* Exponent */ 684 __u8 i; /* List index (when in range struct) */ 685 __u8 flags; /* Flags (fixed/auto) */ 686 }; 687 688 /* 689 * Quality of the link 690 */ 691 struct iw_quality 692 { 693 __u8 qual; /* link quality (%retries, SNR, 694 %missed beacons or better...) */ 695 __u8 level; /* signal level (dBm) */ 696 __u8 noise; /* noise level (dBm) */ 697 __u8 updated; /* Flags to know if updated */ 698 }; 699 700 /* 701 * Packet discarded in the wireless adapter due to 702 * "wireless" specific problems... 703 * Note : the list of counter and statistics in net_device_stats 704 * is already pretty exhaustive, and you should use that first. 705 * This is only additional stats... 706 */ 707 struct iw_discarded 708 { 709 __u32 nwid; /* Rx : Wrong nwid/essid */ 710 __u32 code; /* Rx : Unable to code/decode (WEP) */ 711 __u32 fragment; /* Rx : Can't perform MAC reassembly */ 712 __u32 retries; /* Tx : Max MAC retries num reached */ 713 __u32 misc; /* Others cases */ 714 }; 715 716 /* 717 * Packet/Time period missed in the wireless adapter due to 718 * "wireless" specific problems... 719 */ 720 struct iw_missed 721 { 722 __u32 beacon; /* Missed beacons/superframe */ 723 }; 724 725 /* 726 * Quality range (for spy threshold) 727 */ 728 struct iw_thrspy 729 { 730 struct sockaddr addr; /* Source address (hw/mac) */ 731 struct iw_quality qual; /* Quality of the link */ 732 struct iw_quality low; /* Low threshold */ 733 struct iw_quality high; /* High threshold */ 734 }; 735 736 /* 737 * Optional data for scan request 738 * 739 * Note: these optional parameters are controlling parameters for the 740 * scanning behavior, these do not apply to getting scan results 741 * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and 742 * provide a merged results with all BSSes even if the previous scan 743 * request limited scanning to a subset, e.g., by specifying an SSID. 744 * Especially, scan results are required to include an entry for the 745 * current BSS if the driver is in Managed mode and associated with an AP. 746 */ 747 struct iw_scan_req 748 { 749 __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ 750 __u8 essid_len; 751 __u8 num_channels; /* num entries in channel_list; 752 * 0 = scan all allowed channels */ 753 __u8 flags; /* reserved as padding; use zero, this may 754 * be used in the future for adding flags 755 * to request different scan behavior */ 756 struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or 757 * individual address of a specific BSS */ 758 759 /* 760 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using 761 * the current ESSID. This allows scan requests for specific ESSID 762 * without having to change the current ESSID and potentially breaking 763 * the current association. 764 */ 765 __u8 essid[IW_ESSID_MAX_SIZE]; 766 767 /* 768 * Optional parameters for changing the default scanning behavior. 769 * These are based on the MLME-SCAN.request from IEEE Std 802.11. 770 * TU is 1.024 ms. If these are set to 0, driver is expected to use 771 * reasonable default values. min_channel_time defines the time that 772 * will be used to wait for the first reply on each channel. If no 773 * replies are received, next channel will be scanned after this. If 774 * replies are received, total time waited on the channel is defined by 775 * max_channel_time. 776 */ 777 __u32 min_channel_time; /* in TU */ 778 __u32 max_channel_time; /* in TU */ 779 780 struct iw_freq channel_list[IW_MAX_FREQUENCIES]; 781 }; 782 783 /* ------------------------- WPA SUPPORT ------------------------- */ 784 785 /* 786 * Extended data structure for get/set encoding (this is used with 787 * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* 788 * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and 789 * only the data contents changes (key data -> this structure, including 790 * key data). 791 * 792 * If the new key is the first group key, it will be set as the default 793 * TX key. Otherwise, default TX key index is only changed if 794 * IW_ENCODE_EXT_SET_TX_KEY flag is set. 795 * 796 * Key will be changed with SIOCSIWENCODEEXT in all cases except for 797 * special "change TX key index" operation which is indicated by setting 798 * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. 799 * 800 * tx_seq/rx_seq are only used when respective 801 * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal 802 * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start 803 * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally 804 * used only by an Authenticator (AP or an IBSS station) to get the 805 * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and 806 * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for 807 * debugging/testing. 808 */ 809 struct iw_encode_ext 810 { 811 __u32 ext_flags; /* IW_ENCODE_EXT_* */ 812 __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 813 __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 814 struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast 815 * (group) keys or unicast address for 816 * individual keys */ 817 __u16 alg; /* IW_ENCODE_ALG_* */ 818 __u16 key_len; 819 __u8 key[0]; 820 }; 821 822 /* SIOCSIWMLME data */ 823 struct iw_mlme 824 { 825 __u16 cmd; /* IW_MLME_* */ 826 __u16 reason_code; 827 struct sockaddr addr; 828 }; 829 830 /* SIOCSIWPMKSA data */ 831 #define IW_PMKSA_ADD 1 832 #define IW_PMKSA_REMOVE 2 833 #define IW_PMKSA_FLUSH 3 834 835 #define IW_PMKID_LEN 16 836 837 struct iw_pmksa 838 { 839 __u32 cmd; /* IW_PMKSA_* */ 840 struct sockaddr bssid; 841 __u8 pmkid[IW_PMKID_LEN]; 842 }; 843 844 /* IWEVMICHAELMICFAILURE data */ 845 struct iw_michaelmicfailure 846 { 847 __u32 flags; 848 struct sockaddr src_addr; 849 __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 850 }; 851 852 /* IWEVPMKIDCAND data */ 853 #define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ 854 struct iw_pmkid_cand 855 { 856 __u32 flags; /* IW_PMKID_CAND_* */ 857 __u32 index; /* the smaller the index, the higher the 858 * priority */ 859 struct sockaddr bssid; 860 }; 861 862 /* ------------------------ WIRELESS STATS ------------------------ */ 863 /* 864 * Wireless statistics (used for /proc/net/wireless) 865 */ 866 struct iw_statistics 867 { 868 __u16 status; /* Status 869 * - device dependent for now */ 870 871 struct iw_quality qual; /* Quality of the link 872 * (instant/mean/max) */ 873 struct iw_discarded discard; /* Packet discarded counts */ 874 struct iw_missed miss; /* Packet missed counts */ 875 }; 876 877 /* ------------------------ IOCTL REQUEST ------------------------ */ 878 /* 879 * This structure defines the payload of an ioctl, and is used 880 * below. 881 * 882 * Note that this structure should fit on the memory footprint 883 * of iwreq (which is the same as ifreq), which mean a max size of 884 * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... 885 * You should check this when increasing the structures defined 886 * above in this file... 887 */ 888 union iwreq_data 889 { 890 /* Config - generic */ 891 char name[IFNAMSIZ]; 892 /* Name : used to verify the presence of wireless extensions. 893 * Name of the protocol/provider... */ 894 895 struct iw_point essid; /* Extended network name */ 896 struct iw_param nwid; /* network id (or domain - the cell) */ 897 struct iw_freq freq; /* frequency or channel : 898 * 0-1000 = channel 899 * > 1000 = frequency in Hz */ 900 901 struct iw_param sens; /* signal level threshold */ 902 struct iw_param bitrate; /* default bit rate */ 903 struct iw_param txpower; /* default transmit power */ 904 struct iw_param rts; /* RTS threshold threshold */ 905 struct iw_param frag; /* Fragmentation threshold */ 906 __u32 mode; /* Operation mode */ 907 struct iw_param retry; /* Retry limits & lifetime */ 908 909 struct iw_point encoding; /* Encoding stuff : tokens */ 910 struct iw_param power; /* PM duration/timeout */ 911 struct iw_quality qual; /* Quality part of statistics */ 912 913 struct sockaddr ap_addr; /* Access point address */ 914 struct sockaddr addr; /* Destination address (hw/mac) */ 915 916 struct iw_param param; /* Other small parameters */ 917 struct iw_point data; /* Other large parameters */ 918 }; 919 920 /* 921 * The structure to exchange data for ioctl. 922 * This structure is the same as 'struct ifreq', but (re)defined for 923 * convenience... 924 * Do I need to remind you about structure size (32 octets) ? 925 */ 926 struct iwreq 927 { 928 union 929 { 930 char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ 931 } ifr_ifrn; 932 933 /* Data part (defined just above) */ 934 union iwreq_data u; 935 }; 936 937 /* -------------------------- IOCTL DATA -------------------------- */ 938 /* 939 * For those ioctl which want to exchange mode data that what could 940 * fit in the above structure... 941 */ 942 943 /* 944 * Range of parameters 945 */ 946 947 struct iw_range 948 { 949 /* Informative stuff (to choose between different interface) */ 950 __u32 throughput; /* To give an idea... */ 951 /* In theory this value should be the maximum benchmarked 952 * TCP/IP throughput, because with most of these devices the 953 * bit rate is meaningless (overhead an co) to estimate how 954 * fast the connection will go and pick the fastest one. 955 * I suggest people to play with Netperf or any benchmark... 956 */ 957 958 /* NWID (or domain id) */ 959 __u32 min_nwid; /* Minimal NWID we are able to set */ 960 __u32 max_nwid; /* Maximal NWID we are able to set */ 961 962 /* Old Frequency (backward compat - moved lower ) */ 963 __u16 old_num_channels; 964 __u8 old_num_frequency; 965 966 /* Wireless event capability bitmasks */ 967 __u32 event_capa[6]; 968 969 /* signal level threshold range */ 970 __s32 sensitivity; 971 972 /* Quality of link & SNR stuff */ 973 /* Quality range (link, level, noise) 974 * If the quality is absolute, it will be in the range [0 ; max_qual], 975 * if the quality is dBm, it will be in the range [max_qual ; 0]. 976 * Don't forget that we use 8 bit arithmetics... */ 977 struct iw_quality max_qual; /* Quality of the link */ 978 /* This should contain the average/typical values of the quality 979 * indicator. This should be the threshold between a "good" and 980 * a "bad" link (example : monitor going from green to orange). 981 * Currently, user space apps like quality monitors don't have any 982 * way to calibrate the measurement. With this, they can split 983 * the range between 0 and max_qual in different quality level 984 * (using a geometric subdivision centered on the average). 985 * I expect that people doing the user space apps will feedback 986 * us on which value we need to put in each driver... */ 987 struct iw_quality avg_qual; /* Quality of the link */ 988 989 /* Rates */ 990 __u8 num_bitrates; /* Number of entries in the list */ 991 __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ 992 993 /* RTS threshold */ 994 __s32 min_rts; /* Minimal RTS threshold */ 995 __s32 max_rts; /* Maximal RTS threshold */ 996 997 /* Frag threshold */ 998 __s32 min_frag; /* Minimal frag threshold */ 999 __s32 max_frag; /* Maximal frag threshold */ 1000 1001 /* Power Management duration & timeout */ 1002 __s32 min_pmp; /* Minimal PM period */ 1003 __s32 max_pmp; /* Maximal PM period */ 1004 __s32 min_pmt; /* Minimal PM timeout */ 1005 __s32 max_pmt; /* Maximal PM timeout */ 1006 __u16 pmp_flags; /* How to decode max/min PM period */ 1007 __u16 pmt_flags; /* How to decode max/min PM timeout */ 1008 __u16 pm_capa; /* What PM options are supported */ 1009 1010 /* Encoder stuff */ 1011 __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ 1012 __u8 num_encoding_sizes; /* Number of entry in the list */ 1013 __u8 max_encoding_tokens; /* Max number of tokens */ 1014 /* For drivers that need a "login/passwd" form */ 1015 __u8 encoding_login_index; /* token index for login token */ 1016 1017 /* Transmit power */ 1018 __u16 txpower_capa; /* What options are supported */ 1019 __u8 num_txpower; /* Number of entries in the list */ 1020 __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ 1021 1022 /* Wireless Extension version info */ 1023 __u8 we_version_compiled; /* Must be WIRELESS_EXT */ 1024 __u8 we_version_source; /* Last update of source */ 1025 1026 /* Retry limits and lifetime */ 1027 __u16 retry_capa; /* What retry options are supported */ 1028 __u16 retry_flags; /* How to decode max/min retry limit */ 1029 __u16 r_time_flags; /* How to decode max/min retry life */ 1030 __s32 min_retry; /* Minimal number of retries */ 1031 __s32 max_retry; /* Maximal number of retries */ 1032 __s32 min_r_time; /* Minimal retry lifetime */ 1033 __s32 max_r_time; /* Maximal retry lifetime */ 1034 1035 /* Frequency */ 1036 __u16 num_channels; /* Number of channels [0; num - 1] */ 1037 __u8 num_frequency; /* Number of entry in the list */ 1038 struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ 1039 /* Note : this frequency list doesn't need to fit channel numbers, 1040 * because each entry contain its channel index */ 1041 1042 __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ 1043 }; 1044 1045 /* 1046 * Private ioctl interface information 1047 */ 1048 1049 struct iw_priv_args 1050 { 1051 __u32 cmd; /* Number of the ioctl to issue */ 1052 __u16 set_args; /* Type and number of args */ 1053 __u16 get_args; /* Type and number of args */ 1054 char name[IFNAMSIZ]; /* Name of the extension */ 1055 }; 1056 1057 /* ----------------------- WIRELESS EVENTS ----------------------- */ 1058 /* 1059 * Wireless events are carried through the rtnetlink socket to user 1060 * space. They are encapsulated in the IFLA_WIRELESS field of 1061 * a RTM_NEWLINK message. 1062 */ 1063 1064 /* 1065 * A Wireless Event. Contains basically the same data as the ioctl... 1066 */ 1067 struct iw_event 1068 { 1069 __u16 len; /* Real lenght of this stuff */ 1070 __u16 cmd; /* Wireless IOCTL */ 1071 union iwreq_data u; /* IOCTL fixed payload */ 1072 }; 1073 1074 /* Size of the Event prefix (including padding and alignement junk) */ 1075 #define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) 1076 /* Size of the various events */ 1077 #define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) 1078 #define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) 1079 #define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) 1080 #define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) 1081 #define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) 1082 #define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) 1083 1084 /* iw_point events are special. First, the payload (extra data) come at 1085 * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, 1086 * we omit the pointer, so start at an offset. */ 1087 #define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ 1088 (char *) NULL) 1089 #define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ 1090 IW_EV_POINT_OFF) 1091 1092 /* Size of the Event prefix when packed in stream */ 1093 #define IW_EV_LCP_PK_LEN (4) 1094 /* Size of the various events when packed in stream */ 1095 #define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) 1096 #define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) 1097 #define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) 1098 #define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) 1099 #define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) 1100 #define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) 1101 #define IW_EV_POINT_PK_LEN (IW_EV_LCP_LEN + 4) 1102 1103 #endif /* _LINUX_WIRELESS_H */ 1104