1 /* 2 * USB Serial Converter stuff 3 * 4 * Copyright (C) 1999 - 2005 5 * Greg Kroah-Hartman ([email protected]) 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; version 2 of the License. 10 * 11 */ 12 13 #ifndef __LINUX_USB_SERIAL_H 14 #define __LINUX_USB_SERIAL_H 15 16 #include <linux/kref.h> 17 #include <linux/mutex.h> 18 #include <linux/sysrq.h> 19 20 #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ 21 #define SERIAL_TTY_MINORS 254 /* loads of devices :) */ 22 #define SERIAL_TTY_NO_MINOR 255 /* No minor was assigned */ 23 24 /* The maximum number of ports one device can grab at once */ 25 #define MAX_NUM_PORTS 8 26 27 /* parity check flag */ 28 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) 29 30 enum port_dev_state { 31 PORT_UNREGISTERED, 32 PORT_REGISTERING, 33 PORT_REGISTERED, 34 PORT_UNREGISTERING, 35 }; 36 37 /** 38 * usb_serial_port: structure for the specific ports of a device. 39 * @serial: pointer back to the struct usb_serial owner of this port. 40 * @port: pointer to the corresponding tty_port for this port. 41 * @lock: spinlock to grab when updating portions of this structure. 42 * @mutex: mutex used to synchronize serial_open() and serial_close() 43 * access for this port. 44 * @number: the number of the port (the minor number). 45 * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. 46 * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. 47 * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe 48 * for this port. 49 * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. 50 * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. 51 * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. 52 * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe 53 * for this port. 54 * @bulk_in_buffer: pointer to the bulk in buffer for this port. 55 * @bulk_in_size: the size of the bulk_in_buffer, in bytes. 56 * @read_urb: pointer to the bulk in struct urb for this port. 57 * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this 58 * port. 59 * @bulk_out_buffer: pointer to the bulk out buffer for this port. 60 * @bulk_out_size: the size of the bulk_out_buffer, in bytes. 61 * @write_urb: pointer to the bulk out struct urb for this port. 62 * @write_fifo: kfifo used to buffer outgoing data 63 * @write_urb_busy: port`s writing status 64 * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this 65 * port. 66 * @write_wait: a wait_queue_head_t used by the port. 67 * @work: work queue entry for the line discipline waking up. 68 * @throttled: nonzero if the read urb is inactive to throttle the device 69 * @throttle_req: nonzero if the tty wants to throttle us 70 * @console: attached usb serial console 71 * @dev: pointer to the serial device 72 * 73 * This structure is used by the usb-serial core and drivers for the specific 74 * ports of a device. 75 */ 76 struct usb_serial_port { 77 struct usb_serial *serial; 78 struct tty_port port; 79 spinlock_t lock; 80 struct mutex mutex; 81 unsigned char number; 82 83 unsigned char *interrupt_in_buffer; 84 struct urb *interrupt_in_urb; 85 __u8 interrupt_in_endpointAddress; 86 87 unsigned char *interrupt_out_buffer; 88 int interrupt_out_size; 89 struct urb *interrupt_out_urb; 90 __u8 interrupt_out_endpointAddress; 91 92 unsigned char *bulk_in_buffer; 93 int bulk_in_size; 94 struct urb *read_urb; 95 __u8 bulk_in_endpointAddress; 96 97 unsigned char *bulk_out_buffer; 98 int bulk_out_size; 99 struct urb *write_urb; 100 struct kfifo *write_fifo; 101 int write_urb_busy; 102 __u8 bulk_out_endpointAddress; 103 104 int tx_bytes_flight; 105 int urbs_in_flight; 106 107 wait_queue_head_t write_wait; 108 struct work_struct work; 109 char throttled; 110 char throttle_req; 111 char console; 112 unsigned long sysrq; /* sysrq timeout */ 113 struct device dev; 114 enum port_dev_state dev_state; 115 }; 116 #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) 117 118 /* get and set the port private data pointer helper functions */ 119 static inline void *usb_get_serial_port_data(struct usb_serial_port *port) 120 { 121 return dev_get_drvdata(&port->dev); 122 } 123 124 static inline void usb_set_serial_port_data(struct usb_serial_port *port, 125 void *data) 126 { 127 dev_set_drvdata(&port->dev, data); 128 } 129 130 /** 131 * usb_serial - structure used by the usb-serial core for a device 132 * @dev: pointer to the struct usb_device for this device 133 * @type: pointer to the struct usb_serial_driver for this device 134 * @interface: pointer to the struct usb_interface for this device 135 * @minor: the starting minor number for this device 136 * @num_ports: the number of ports this device has 137 * @num_interrupt_in: number of interrupt in endpoints we have 138 * @num_interrupt_out: number of interrupt out endpoints we have 139 * @num_bulk_in: number of bulk in endpoints we have 140 * @num_bulk_out: number of bulk out endpoints we have 141 * @port: array of struct usb_serial_port structures for the different ports. 142 * @private: place to put any driver specific information that is needed. The 143 * usb-serial driver is required to manage this data, the usb-serial core 144 * will not touch this. Use usb_get_serial_data() and 145 * usb_set_serial_data() to access this. 146 */ 147 struct usb_serial { 148 struct usb_device *dev; 149 struct usb_serial_driver *type; 150 struct usb_interface *interface; 151 unsigned char disconnected:1; 152 unsigned char suspending:1; 153 unsigned char minor; 154 unsigned char num_ports; 155 unsigned char num_port_pointers; 156 char num_interrupt_in; 157 char num_interrupt_out; 158 char num_bulk_in; 159 char num_bulk_out; 160 struct usb_serial_port *port[MAX_NUM_PORTS]; 161 struct kref kref; 162 struct mutex disc_mutex; 163 void *private; 164 }; 165 #define to_usb_serial(d) container_of(d, struct usb_serial, kref) 166 167 /* get and set the serial private data pointer helper functions */ 168 static inline void *usb_get_serial_data(struct usb_serial *serial) 169 { 170 return serial->private; 171 } 172 173 static inline void usb_set_serial_data(struct usb_serial *serial, void *data) 174 { 175 serial->private = data; 176 } 177 178 /** 179 * usb_serial_driver - describes a usb serial driver 180 * @description: pointer to a string that describes this driver. This string 181 * used in the syslog messages when a device is inserted or removed. 182 * @id_table: pointer to a list of usb_device_id structures that define all 183 * of the devices this structure can support. 184 * @num_ports: the number of different ports this device will have. 185 * @calc_num_ports: pointer to a function to determine how many ports this 186 * device has dynamically. It will be called after the probe() 187 * callback is called, but before attach() 188 * @probe: pointer to the driver's probe function. 189 * This will be called when the device is inserted into the system, 190 * but before the device has been fully initialized by the usb_serial 191 * subsystem. Use this function to download any firmware to the device, 192 * or any other early initialization that might be needed. 193 * Return 0 to continue on with the initialization sequence. Anything 194 * else will abort it. 195 * @attach: pointer to the driver's attach function. 196 * This will be called when the struct usb_serial structure is fully set 197 * set up. Do any local initialization of the device, or any private 198 * memory structure allocation at this point in time. 199 * @disconnect: pointer to the driver's disconnect function. This will be 200 * called when the device is unplugged or unbound from the driver. 201 * @release: pointer to the driver's release function. This will be called 202 * when the usb_serial data structure is about to be destroyed. 203 * @usb_driver: pointer to the struct usb_driver that controls this 204 * device. This is necessary to allow dynamic ids to be added to 205 * the driver from sysfs. 206 * 207 * This structure is defines a USB Serial driver. It provides all of 208 * the information that the USB serial core code needs. If the function 209 * pointers are defined, then the USB serial core code will call them when 210 * the corresponding tty port functions are called. If they are not 211 * called, the generic serial function will be used instead. 212 * 213 * The driver.owner field should be set to the module owner of this driver. 214 * The driver.name field should be set to the name of this driver (remember 215 * it will show up in sysfs, so it needs to be short and to the point. 216 * Using the module name is a good idea.) 217 */ 218 struct usb_serial_driver { 219 const char *description; 220 const struct usb_device_id *id_table; 221 char num_ports; 222 223 struct list_head driver_list; 224 struct device_driver driver; 225 struct usb_driver *usb_driver; 226 struct usb_dynids dynids; 227 int max_in_flight_urbs; 228 229 int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); 230 int (*attach)(struct usb_serial *serial); 231 int (*calc_num_ports) (struct usb_serial *serial); 232 233 void (*disconnect)(struct usb_serial *serial); 234 void (*release)(struct usb_serial *serial); 235 236 int (*port_probe)(struct usb_serial_port *port); 237 int (*port_remove)(struct usb_serial_port *port); 238 239 int (*suspend)(struct usb_serial *serial, pm_message_t message); 240 int (*resume)(struct usb_serial *serial); 241 242 /* serial function calls */ 243 /* Called by console and by the tty layer */ 244 int (*open)(struct tty_struct *tty, struct usb_serial_port *port); 245 void (*close)(struct usb_serial_port *port); 246 int (*write)(struct tty_struct *tty, struct usb_serial_port *port, 247 const unsigned char *buf, int count); 248 /* Called only by the tty layer */ 249 int (*write_room)(struct tty_struct *tty); 250 int (*ioctl)(struct tty_struct *tty, struct file *file, 251 unsigned int cmd, unsigned long arg); 252 void (*set_termios)(struct tty_struct *tty, 253 struct usb_serial_port *port, struct ktermios *old); 254 void (*break_ctl)(struct tty_struct *tty, int break_state); 255 int (*chars_in_buffer)(struct tty_struct *tty); 256 void (*throttle)(struct tty_struct *tty); 257 void (*unthrottle)(struct tty_struct *tty); 258 int (*tiocmget)(struct tty_struct *tty, struct file *file); 259 int (*tiocmset)(struct tty_struct *tty, struct file *file, 260 unsigned int set, unsigned int clear); 261 /* Called by the tty layer for port level work. There may or may not 262 be an attached tty at this point */ 263 void (*dtr_rts)(struct usb_serial_port *port, int on); 264 int (*carrier_raised)(struct usb_serial_port *port); 265 /* Called by the usb serial hooks to allow the user to rework the 266 termios state */ 267 void (*init_termios)(struct tty_struct *tty); 268 /* USB events */ 269 void (*read_int_callback)(struct urb *urb); 270 void (*write_int_callback)(struct urb *urb); 271 void (*read_bulk_callback)(struct urb *urb); 272 void (*write_bulk_callback)(struct urb *urb); 273 }; 274 #define to_usb_serial_driver(d) \ 275 container_of(d, struct usb_serial_driver, driver) 276 277 extern int usb_serial_register(struct usb_serial_driver *driver); 278 extern void usb_serial_deregister(struct usb_serial_driver *driver); 279 extern void usb_serial_port_softint(struct usb_serial_port *port); 280 281 extern int usb_serial_probe(struct usb_interface *iface, 282 const struct usb_device_id *id); 283 extern void usb_serial_disconnect(struct usb_interface *iface); 284 285 extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); 286 extern int usb_serial_resume(struct usb_interface *intf); 287 288 extern int ezusb_writememory(struct usb_serial *serial, int address, 289 unsigned char *data, int length, __u8 bRequest); 290 extern int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit); 291 292 /* USB Serial console functions */ 293 #ifdef CONFIG_USB_SERIAL_CONSOLE 294 extern void usb_serial_console_init(int debug, int minor); 295 extern void usb_serial_console_exit(void); 296 extern void usb_serial_console_disconnect(struct usb_serial *serial); 297 #else 298 static inline void usb_serial_console_init(int debug, int minor) { } 299 static inline void usb_serial_console_exit(void) { } 300 static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} 301 #endif 302 303 /* Functions needed by other parts of the usbserial core */ 304 extern struct usb_serial *usb_serial_get_by_index(unsigned int minor); 305 extern void usb_serial_put(struct usb_serial *serial); 306 extern int usb_serial_generic_open(struct tty_struct *tty, 307 struct usb_serial_port *port); 308 extern int usb_serial_generic_write(struct tty_struct *tty, 309 struct usb_serial_port *port, const unsigned char *buf, int count); 310 extern void usb_serial_generic_close(struct usb_serial_port *port); 311 extern int usb_serial_generic_resume(struct usb_serial *serial); 312 extern int usb_serial_generic_write_room(struct tty_struct *tty); 313 extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); 314 extern void usb_serial_generic_read_bulk_callback(struct urb *urb); 315 extern void usb_serial_generic_write_bulk_callback(struct urb *urb); 316 extern void usb_serial_generic_throttle(struct tty_struct *tty); 317 extern void usb_serial_generic_unthrottle(struct tty_struct *tty); 318 extern void usb_serial_generic_disconnect(struct usb_serial *serial); 319 extern void usb_serial_generic_release(struct usb_serial *serial); 320 extern int usb_serial_generic_register(int debug); 321 extern void usb_serial_generic_deregister(void); 322 extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port, 323 gfp_t mem_flags); 324 extern int usb_serial_handle_sysrq_char(struct tty_struct *tty, 325 struct usb_serial_port *port, 326 unsigned int ch); 327 extern int usb_serial_handle_break(struct usb_serial_port *port); 328 329 330 extern int usb_serial_bus_register(struct usb_serial_driver *device); 331 extern void usb_serial_bus_deregister(struct usb_serial_driver *device); 332 333 extern struct usb_serial_driver usb_serial_generic_device; 334 extern struct bus_type usb_serial_bus_type; 335 extern struct tty_driver *usb_serial_tty_driver; 336 337 static inline void usb_serial_debug_data(int debug, 338 struct device *dev, 339 const char *function, int size, 340 const unsigned char *data) 341 { 342 int i; 343 344 if (debug) { 345 dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", 346 function, size); 347 for (i = 0; i < size; ++i) 348 printk("%.2x ", data[i]); 349 printk("\n"); 350 } 351 } 352 353 /* Use our own dbg macro */ 354 #undef dbg 355 #define dbg(format, arg...) \ 356 do { \ 357 if (debug) \ 358 printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , \ 359 ## arg); \ 360 } while (0) 361 362 363 364 #endif /* __LINUX_USB_SERIAL_H */ 365 366