1 /* 2 * USB Serial Converter stuff 3 * 4 * Copyright (C) 1999 - 2005 5 * Greg Kroah-Hartman ([email protected]) 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; version 2 of the License. 10 * 11 */ 12 13 14 #ifndef __LINUX_USB_SERIAL_H 15 #define __LINUX_USB_SERIAL_H 16 17 #include <linux/kref.h> 18 #include <linux/mutex.h> 19 20 #define SERIAL_TTY_MAJOR 188 /* Nice legal number now */ 21 #define SERIAL_TTY_MINORS 255 /* loads of devices :) */ 22 23 #define MAX_NUM_PORTS 8 /* The maximum number of ports one device can grab at once */ 24 25 /* parity check flag */ 26 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) 27 28 /** 29 * usb_serial_port: structure for the specific ports of a device. 30 * @serial: pointer back to the struct usb_serial owner of this port. 31 * @tty: pointer to the corresponding tty for this port. 32 * @lock: spinlock to grab when updating portions of this structure. 33 * @mutex: mutex used to synchronize serial_open() and serial_close() 34 * access for this port. 35 * @number: the number of the port (the minor number). 36 * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. 37 * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. 38 * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe 39 * for this port. 40 * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. 41 * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. 42 * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. 43 * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe 44 * for this port. 45 * @bulk_in_buffer: pointer to the bulk in buffer for this port. 46 * @read_urb: pointer to the bulk in struct urb for this port. 47 * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this 48 * port. 49 * @bulk_out_buffer: pointer to the bulk out buffer for this port. 50 * @bulk_out_size: the size of the bulk_out_buffer, in bytes. 51 * @write_urb: pointer to the bulk out struct urb for this port. 52 * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this 53 * port. 54 * @write_wait: a wait_queue_head_t used by the port. 55 * @work: work queue entry for the line discipline waking up. 56 * @open_count: number of times this port has been opened. 57 * 58 * This structure is used by the usb-serial core and drivers for the specific 59 * ports of a device. 60 */ 61 struct usb_serial_port { 62 struct usb_serial * serial; 63 struct tty_struct * tty; 64 spinlock_t lock; 65 struct mutex mutex; 66 unsigned char number; 67 68 unsigned char * interrupt_in_buffer; 69 struct urb * interrupt_in_urb; 70 __u8 interrupt_in_endpointAddress; 71 72 unsigned char * interrupt_out_buffer; 73 int interrupt_out_size; 74 struct urb * interrupt_out_urb; 75 __u8 interrupt_out_endpointAddress; 76 77 unsigned char * bulk_in_buffer; 78 int bulk_in_size; 79 struct urb * read_urb; 80 __u8 bulk_in_endpointAddress; 81 82 unsigned char * bulk_out_buffer; 83 int bulk_out_size; 84 struct urb * write_urb; 85 int write_urb_busy; 86 __u8 bulk_out_endpointAddress; 87 88 wait_queue_head_t write_wait; 89 struct work_struct work; 90 int open_count; 91 struct device dev; 92 }; 93 #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) 94 95 /* get and set the port private data pointer helper functions */ 96 static inline void *usb_get_serial_port_data (struct usb_serial_port *port) 97 { 98 return dev_get_drvdata(&port->dev); 99 } 100 101 static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data) 102 { 103 dev_set_drvdata(&port->dev, data); 104 } 105 106 /** 107 * usb_serial - structure used by the usb-serial core for a device 108 * @dev: pointer to the struct usb_device for this device 109 * @type: pointer to the struct usb_serial_driver for this device 110 * @interface: pointer to the struct usb_interface for this device 111 * @minor: the starting minor number for this device 112 * @num_ports: the number of ports this device has 113 * @num_interrupt_in: number of interrupt in endpoints we have 114 * @num_interrupt_out: number of interrupt out endpoints we have 115 * @num_bulk_in: number of bulk in endpoints we have 116 * @num_bulk_out: number of bulk out endpoints we have 117 * @port: array of struct usb_serial_port structures for the different ports. 118 * @private: place to put any driver specific information that is needed. The 119 * usb-serial driver is required to manage this data, the usb-serial core 120 * will not touch this. Use usb_get_serial_data() and 121 * usb_set_serial_data() to access this. 122 */ 123 struct usb_serial { 124 struct usb_device * dev; 125 struct usb_serial_driver * type; 126 struct usb_interface * interface; 127 unsigned char minor; 128 unsigned char num_ports; 129 unsigned char num_port_pointers; 130 char num_interrupt_in; 131 char num_interrupt_out; 132 char num_bulk_in; 133 char num_bulk_out; 134 struct usb_serial_port * port[MAX_NUM_PORTS]; 135 struct kref kref; 136 void * private; 137 }; 138 #define to_usb_serial(d) container_of(d, struct usb_serial, kref) 139 140 #define NUM_DONT_CARE (-1) 141 142 /* get and set the serial private data pointer helper functions */ 143 static inline void *usb_get_serial_data (struct usb_serial *serial) 144 { 145 return serial->private; 146 } 147 148 static inline void usb_set_serial_data (struct usb_serial *serial, void *data) 149 { 150 serial->private = data; 151 } 152 153 /** 154 * usb_serial_driver - describes a usb serial driver 155 * @description: pointer to a string that describes this driver. This string used 156 * in the syslog messages when a device is inserted or removed. 157 * @id_table: pointer to a list of usb_device_id structures that define all 158 * of the devices this structure can support. 159 * @num_interrupt_in: the number of interrupt in endpoints this device will 160 * have. 161 * @num_interrupt_out: the number of interrupt out endpoints this device will 162 * have. 163 * @num_bulk_in: the number of bulk in endpoints this device will have. 164 * @num_bulk_out: the number of bulk out endpoints this device will have. 165 * @num_ports: the number of different ports this device will have. 166 * @calc_num_ports: pointer to a function to determine how many ports this 167 * device has dynamically. It will be called after the probe() 168 * callback is called, but before attach() 169 * @probe: pointer to the driver's probe function. 170 * This will be called when the device is inserted into the system, 171 * but before the device has been fully initialized by the usb_serial 172 * subsystem. Use this function to download any firmware to the device, 173 * or any other early initialization that might be needed. 174 * Return 0 to continue on with the initialization sequence. Anything 175 * else will abort it. 176 * @attach: pointer to the driver's attach function. 177 * This will be called when the struct usb_serial structure is fully set 178 * set up. Do any local initialization of the device, or any private 179 * memory structure allocation at this point in time. 180 * @shutdown: pointer to the driver's shutdown function. This will be 181 * called when the device is removed from the system. 182 * @usb_driver: pointer to the struct usb_driver that controls this 183 * device. This is necessary to allow dynamic ids to be added to 184 * the driver from sysfs. 185 * 186 * This structure is defines a USB Serial driver. It provides all of 187 * the information that the USB serial core code needs. If the function 188 * pointers are defined, then the USB serial core code will call them when 189 * the corresponding tty port functions are called. If they are not 190 * called, the generic serial function will be used instead. 191 * 192 * The driver.owner field should be set to the module owner of this driver. 193 * The driver.name field should be set to the name of this driver (remember 194 * it will show up in sysfs, so it needs to be short and to the point. 195 * Useing the module name is a good idea.) 196 */ 197 struct usb_serial_driver { 198 const char *description; 199 const struct usb_device_id *id_table; 200 char num_interrupt_in; 201 char num_interrupt_out; 202 char num_bulk_in; 203 char num_bulk_out; 204 char num_ports; 205 206 struct list_head driver_list; 207 struct device_driver driver; 208 struct usb_driver *usb_driver; 209 struct usb_dynids dynids; 210 211 int (*probe) (struct usb_serial *serial, const struct usb_device_id *id); 212 int (*attach) (struct usb_serial *serial); 213 int (*calc_num_ports) (struct usb_serial *serial); 214 215 void (*shutdown) (struct usb_serial *serial); 216 217 int (*port_probe) (struct usb_serial_port *port); 218 int (*port_remove) (struct usb_serial_port *port); 219 220 /* serial function calls */ 221 int (*open) (struct usb_serial_port *port, struct file * filp); 222 void (*close) (struct usb_serial_port *port, struct file * filp); 223 int (*write) (struct usb_serial_port *port, const unsigned char *buf, int count); 224 int (*write_room) (struct usb_serial_port *port); 225 int (*ioctl) (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); 226 void (*set_termios) (struct usb_serial_port *port, struct ktermios * old); 227 void (*break_ctl) (struct usb_serial_port *port, int break_state); 228 int (*chars_in_buffer) (struct usb_serial_port *port); 229 void (*throttle) (struct usb_serial_port *port); 230 void (*unthrottle) (struct usb_serial_port *port); 231 int (*tiocmget) (struct usb_serial_port *port, struct file *file); 232 int (*tiocmset) (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear); 233 234 void (*read_int_callback)(struct urb *urb); 235 void (*write_int_callback)(struct urb *urb); 236 void (*read_bulk_callback)(struct urb *urb); 237 void (*write_bulk_callback)(struct urb *urb); 238 }; 239 #define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver) 240 241 extern int usb_serial_register(struct usb_serial_driver *driver); 242 extern void usb_serial_deregister(struct usb_serial_driver *driver); 243 extern void usb_serial_port_softint(struct usb_serial_port *port); 244 245 extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id); 246 extern void usb_serial_disconnect(struct usb_interface *iface); 247 248 extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest); 249 extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit); 250 251 /* USB Serial console functions */ 252 #ifdef CONFIG_USB_SERIAL_CONSOLE 253 extern void usb_serial_console_init (int debug, int minor); 254 extern void usb_serial_console_exit (void); 255 extern void usb_serial_console_disconnect(struct usb_serial *serial); 256 #else 257 static inline void usb_serial_console_init (int debug, int minor) { } 258 static inline void usb_serial_console_exit (void) { } 259 static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} 260 #endif 261 262 /* Functions needed by other parts of the usbserial core */ 263 extern struct usb_serial *usb_serial_get_by_index (unsigned int minor); 264 extern void usb_serial_put(struct usb_serial *serial); 265 extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp); 266 extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count); 267 extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp); 268 extern int usb_serial_generic_write_room (struct usb_serial_port *port); 269 extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port); 270 extern void usb_serial_generic_read_bulk_callback (struct urb *urb); 271 extern void usb_serial_generic_write_bulk_callback (struct urb *urb); 272 extern void usb_serial_generic_shutdown (struct usb_serial *serial); 273 extern int usb_serial_generic_register (int debug); 274 extern void usb_serial_generic_deregister (void); 275 276 extern int usb_serial_bus_register (struct usb_serial_driver *device); 277 extern void usb_serial_bus_deregister (struct usb_serial_driver *device); 278 279 extern struct usb_serial_driver usb_serial_generic_device; 280 extern struct bus_type usb_serial_bus_type; 281 extern struct tty_driver *usb_serial_tty_driver; 282 283 static inline void usb_serial_debug_data(int debug, 284 struct device *dev, 285 const char *function, int size, 286 const unsigned char *data) 287 { 288 int i; 289 290 if (debug) { 291 dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size); 292 for (i = 0; i < size; ++i) 293 printk ("%.2x ", data[i]); 294 printk ("\n"); 295 } 296 } 297 298 /* Use our own dbg macro */ 299 #undef dbg 300 #define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0) 301 302 303 304 #endif /* ifdef __LINUX_USB_SERIAL_H */ 305 306