1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (c) 2001-2002 by David Brownell 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License as published by the 7 * Free Software Foundation; either version 2 of the License, or (at your 8 * option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 13 * for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software Foundation, 17 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 18 */ 19 20 #ifndef __USB_CORE_HCD_H 21 #define __USB_CORE_HCD_H 22 23 #ifdef __KERNEL__ 24 25 #include <linux/rwsem.h> 26 #include <linux/interrupt.h> 27 #include <linux/idr.h> 28 29 #define MAX_TOPO_LEVEL 6 30 31 /* This file contains declarations of usbcore internals that are mostly 32 * used or exposed by Host Controller Drivers. 33 */ 34 35 /* 36 * USB Packet IDs (PIDs) 37 */ 38 #define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */ 39 #define USB_PID_OUT 0xe1 40 #define USB_PID_ACK 0xd2 41 #define USB_PID_DATA0 0xc3 42 #define USB_PID_PING 0xb4 /* USB 2.0 */ 43 #define USB_PID_SOF 0xa5 44 #define USB_PID_NYET 0x96 /* USB 2.0 */ 45 #define USB_PID_DATA2 0x87 /* USB 2.0 */ 46 #define USB_PID_SPLIT 0x78 /* USB 2.0 */ 47 #define USB_PID_IN 0x69 48 #define USB_PID_NAK 0x5a 49 #define USB_PID_DATA1 0x4b 50 #define USB_PID_PREAMBLE 0x3c /* Token mode */ 51 #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */ 52 #define USB_PID_SETUP 0x2d 53 #define USB_PID_STALL 0x1e 54 #define USB_PID_MDATA 0x0f /* USB 2.0 */ 55 56 /*-------------------------------------------------------------------------*/ 57 58 /* 59 * USB Host Controller Driver (usb_hcd) framework 60 * 61 * Since "struct usb_bus" is so thin, you can't share much code in it. 62 * This framework is a layer over that, and should be more sharable. 63 */ 64 65 /*-------------------------------------------------------------------------*/ 66 67 struct giveback_urb_bh { 68 bool running; 69 spinlock_t lock; 70 struct list_head head; 71 struct tasklet_struct bh; 72 struct usb_host_endpoint *completing_ep; 73 }; 74 75 enum usb_dev_authorize_policy { 76 USB_DEVICE_AUTHORIZE_NONE = 0, 77 USB_DEVICE_AUTHORIZE_ALL = 1, 78 USB_DEVICE_AUTHORIZE_INTERNAL = 2, 79 }; 80 81 struct usb_hcd { 82 83 /* 84 * housekeeping 85 */ 86 struct usb_bus self; /* hcd is-a bus */ 87 struct kref kref; /* reference counter */ 88 89 const char *product_desc; /* product/vendor string */ 90 int speed; /* Speed for this roothub. 91 * May be different from 92 * hcd->driver->flags & HCD_MASK 93 */ 94 char irq_descr[24]; /* driver + bus # */ 95 96 struct timer_list rh_timer; /* drives root-hub polling */ 97 struct urb *status_urb; /* the current status urb */ 98 #ifdef CONFIG_PM 99 struct work_struct wakeup_work; /* for remote wakeup */ 100 #endif 101 struct work_struct died_work; /* for when the device dies */ 102 103 /* 104 * hardware info/state 105 */ 106 const struct hc_driver *driver; /* hw-specific hooks */ 107 108 /* 109 * OTG and some Host controllers need software interaction with phys; 110 * other external phys should be software-transparent 111 */ 112 struct usb_phy *usb_phy; 113 struct usb_phy_roothub *phy_roothub; 114 115 /* Flags that need to be manipulated atomically because they can 116 * change while the host controller is running. Always use 117 * set_bit() or clear_bit() to change their values. 118 */ 119 unsigned long flags; 120 #define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */ 121 #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */ 122 #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */ 123 #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */ 124 #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ 125 #define HCD_FLAG_DEAD 6 /* controller has died? */ 126 #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */ 127 128 /* The flags can be tested using these macros; they are likely to 129 * be slightly faster than test_bit(). 130 */ 131 #define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE)) 132 #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH)) 133 #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING)) 134 #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) 135 #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) 136 #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) 137 138 /* 139 * Specifies if interfaces are authorized by default 140 * or they require explicit user space authorization; this bit is 141 * settable through /sys/class/usb_host/X/interface_authorized_default 142 */ 143 #define HCD_INTF_AUTHORIZED(hcd) \ 144 ((hcd)->flags & (1U << HCD_FLAG_INTF_AUTHORIZED)) 145 146 /* 147 * Specifies if devices are authorized by default 148 * or they require explicit user space authorization; this bit is 149 * settable through /sys/class/usb_host/X/authorized_default 150 */ 151 enum usb_dev_authorize_policy dev_policy; 152 153 /* Flags that get set only during HCD registration or removal. */ 154 unsigned rh_registered:1;/* is root hub registered? */ 155 unsigned rh_pollable:1; /* may we poll the root hub? */ 156 unsigned msix_enabled:1; /* driver has MSI-X enabled? */ 157 unsigned msi_enabled:1; /* driver has MSI enabled? */ 158 /* 159 * do not manage the PHY state in the HCD core, instead let the driver 160 * handle this (for example if the PHY can only be turned on after a 161 * specific event) 162 */ 163 unsigned skip_phy_initialization:1; 164 165 /* The next flag is a stopgap, to be removed when all the HCDs 166 * support the new root-hub polling mechanism. */ 167 unsigned uses_new_polling:1; 168 unsigned wireless:1; /* Wireless USB HCD */ 169 unsigned has_tt:1; /* Integrated TT in root hub */ 170 unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */ 171 unsigned can_do_streams:1; /* HC supports streams */ 172 unsigned tpl_support:1; /* OTG & EH TPL support */ 173 unsigned cant_recv_wakeups:1; 174 /* wakeup requests from downstream aren't received */ 175 176 unsigned int irq; /* irq allocated */ 177 void __iomem *regs; /* device memory/io */ 178 resource_size_t rsrc_start; /* memory/io resource start */ 179 resource_size_t rsrc_len; /* memory/io resource length */ 180 unsigned power_budget; /* in mA, 0 = no limit */ 181 182 struct giveback_urb_bh high_prio_bh; 183 struct giveback_urb_bh low_prio_bh; 184 185 /* bandwidth_mutex should be taken before adding or removing 186 * any new bus bandwidth constraints: 187 * 1. Before adding a configuration for a new device. 188 * 2. Before removing the configuration to put the device into 189 * the addressed state. 190 * 3. Before selecting a different configuration. 191 * 4. Before selecting an alternate interface setting. 192 * 193 * bandwidth_mutex should be dropped after a successful control message 194 * to the device, or resetting the bandwidth after a failed attempt. 195 */ 196 struct mutex *address0_mutex; 197 struct mutex *bandwidth_mutex; 198 struct usb_hcd *shared_hcd; 199 struct usb_hcd *primary_hcd; 200 201 202 #define HCD_BUFFER_POOLS 4 203 struct dma_pool *pool[HCD_BUFFER_POOLS]; 204 205 int state; 206 # define __ACTIVE 0x01 207 # define __SUSPEND 0x04 208 # define __TRANSIENT 0x80 209 210 # define HC_STATE_HALT 0 211 # define HC_STATE_RUNNING (__ACTIVE) 212 # define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE) 213 # define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT) 214 # define HC_STATE_SUSPENDED (__SUSPEND) 215 216 #define HC_IS_RUNNING(state) ((state) & __ACTIVE) 217 #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND) 218 219 /* memory pool for HCs having local memory, or %NULL */ 220 struct gen_pool *localmem_pool; 221 222 /* more shared queuing code would be good; it should support 223 * smarter scheduling, handle transaction translators, etc; 224 * input size of periodic table to an interrupt scheduler. 225 * (ohci 32, uhci 1024, ehci 256/512/1024). 226 */ 227 228 /* The HC driver's private data is stored at the end of 229 * this structure. 230 */ 231 unsigned long hcd_priv[0] 232 __attribute__ ((aligned(sizeof(s64)))); 233 }; 234 235 /* 2.4 does this a bit differently ... */ 236 static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd) 237 { 238 return &hcd->self; 239 } 240 241 static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus) 242 { 243 return container_of(bus, struct usb_hcd, self); 244 } 245 246 /*-------------------------------------------------------------------------*/ 247 248 249 struct hc_driver { 250 const char *description; /* "ehci-hcd" etc */ 251 const char *product_desc; /* product/vendor string */ 252 size_t hcd_priv_size; /* size of private data */ 253 254 /* irq handler */ 255 irqreturn_t (*irq) (struct usb_hcd *hcd); 256 257 int flags; 258 #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */ 259 #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */ 260 #define HCD_USB11 0x0010 /* USB 1.1 */ 261 #define HCD_USB2 0x0020 /* USB 2.0 */ 262 #define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/ 263 #define HCD_USB3 0x0040 /* USB 3.0 */ 264 #define HCD_USB31 0x0050 /* USB 3.1 */ 265 #define HCD_USB32 0x0060 /* USB 3.2 */ 266 #define HCD_MASK 0x0070 267 #define HCD_BH 0x0100 /* URB complete in BH context */ 268 269 /* called to init HCD and root hub */ 270 int (*reset) (struct usb_hcd *hcd); 271 int (*start) (struct usb_hcd *hcd); 272 273 /* NOTE: these suspend/resume calls relate to the HC as 274 * a whole, not just the root hub; they're for PCI bus glue. 275 */ 276 /* called after suspending the hub, before entering D3 etc */ 277 int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup); 278 279 /* called after entering D0 (etc), before resuming the hub */ 280 int (*pci_resume)(struct usb_hcd *hcd, bool hibernated); 281 282 /* cleanly make HCD stop writing memory and doing I/O */ 283 void (*stop) (struct usb_hcd *hcd); 284 285 /* shutdown HCD */ 286 void (*shutdown) (struct usb_hcd *hcd); 287 288 /* return current frame number */ 289 int (*get_frame_number) (struct usb_hcd *hcd); 290 291 /* manage i/o requests, device state */ 292 int (*urb_enqueue)(struct usb_hcd *hcd, 293 struct urb *urb, gfp_t mem_flags); 294 int (*urb_dequeue)(struct usb_hcd *hcd, 295 struct urb *urb, int status); 296 297 /* 298 * (optional) these hooks allow an HCD to override the default DMA 299 * mapping and unmapping routines. In general, they shouldn't be 300 * necessary unless the host controller has special DMA requirements, 301 * such as alignment contraints. If these are not specified, the 302 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead 303 * (and it may be a good idea to call these functions in your HCD 304 * implementation) 305 */ 306 int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb, 307 gfp_t mem_flags); 308 void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb); 309 310 /* hw synch, freeing endpoint resources that urb_dequeue can't */ 311 void (*endpoint_disable)(struct usb_hcd *hcd, 312 struct usb_host_endpoint *ep); 313 314 /* (optional) reset any endpoint state such as sequence number 315 and current window */ 316 void (*endpoint_reset)(struct usb_hcd *hcd, 317 struct usb_host_endpoint *ep); 318 319 /* root hub support */ 320 int (*hub_status_data) (struct usb_hcd *hcd, char *buf); 321 int (*hub_control) (struct usb_hcd *hcd, 322 u16 typeReq, u16 wValue, u16 wIndex, 323 char *buf, u16 wLength); 324 int (*bus_suspend)(struct usb_hcd *); 325 int (*bus_resume)(struct usb_hcd *); 326 int (*start_port_reset)(struct usb_hcd *, unsigned port_num); 327 unsigned long (*get_resuming_ports)(struct usb_hcd *); 328 329 /* force handover of high-speed port to full-speed companion */ 330 void (*relinquish_port)(struct usb_hcd *, int); 331 /* has a port been handed over to a companion? */ 332 int (*port_handed_over)(struct usb_hcd *, int); 333 334 /* CLEAR_TT_BUFFER completion callback */ 335 void (*clear_tt_buffer_complete)(struct usb_hcd *, 336 struct usb_host_endpoint *); 337 338 /* xHCI specific functions */ 339 /* Called by usb_alloc_dev to alloc HC device structures */ 340 int (*alloc_dev)(struct usb_hcd *, struct usb_device *); 341 /* Called by usb_disconnect to free HC device structures */ 342 void (*free_dev)(struct usb_hcd *, struct usb_device *); 343 /* Change a group of bulk endpoints to support multiple stream IDs */ 344 int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev, 345 struct usb_host_endpoint **eps, unsigned int num_eps, 346 unsigned int num_streams, gfp_t mem_flags); 347 /* Reverts a group of bulk endpoints back to not using stream IDs. 348 * Can fail if we run out of memory. 349 */ 350 int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev, 351 struct usb_host_endpoint **eps, unsigned int num_eps, 352 gfp_t mem_flags); 353 354 /* Bandwidth computation functions */ 355 /* Note that add_endpoint() can only be called once per endpoint before 356 * check_bandwidth() or reset_bandwidth() must be called. 357 * drop_endpoint() can only be called once per endpoint also. 358 * A call to xhci_drop_endpoint() followed by a call to 359 * xhci_add_endpoint() will add the endpoint to the schedule with 360 * possibly new parameters denoted by a different endpoint descriptor 361 * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a 362 * call to xhci_drop_endpoint() is not allowed. 363 */ 364 /* Allocate endpoint resources and add them to a new schedule */ 365 int (*add_endpoint)(struct usb_hcd *, struct usb_device *, 366 struct usb_host_endpoint *); 367 /* Drop an endpoint from a new schedule */ 368 int (*drop_endpoint)(struct usb_hcd *, struct usb_device *, 369 struct usb_host_endpoint *); 370 /* Check that a new hardware configuration, set using 371 * endpoint_enable and endpoint_disable, does not exceed bus 372 * bandwidth. This must be called before any set configuration 373 * or set interface requests are sent to the device. 374 */ 375 int (*check_bandwidth)(struct usb_hcd *, struct usb_device *); 376 /* Reset the device schedule to the last known good schedule, 377 * which was set from a previous successful call to 378 * check_bandwidth(). This reverts any add_endpoint() and 379 * drop_endpoint() calls since that last successful call. 380 * Used for when a check_bandwidth() call fails due to resource 381 * or bandwidth constraints. 382 */ 383 void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); 384 /* Returns the hardware-chosen device address */ 385 int (*address_device)(struct usb_hcd *, struct usb_device *udev); 386 /* prepares the hardware to send commands to the device */ 387 int (*enable_device)(struct usb_hcd *, struct usb_device *udev); 388 /* Notifies the HCD after a hub descriptor is fetched. 389 * Will block. 390 */ 391 int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev, 392 struct usb_tt *tt, gfp_t mem_flags); 393 int (*reset_device)(struct usb_hcd *, struct usb_device *); 394 /* Notifies the HCD after a device is connected and its 395 * address is set 396 */ 397 int (*update_device)(struct usb_hcd *, struct usb_device *); 398 int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int); 399 /* USB 3.0 Link Power Management */ 400 /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */ 401 int (*enable_usb3_lpm_timeout)(struct usb_hcd *, 402 struct usb_device *, enum usb3_link_state state); 403 /* The xHCI host controller can still fail the command to 404 * disable the LPM timeouts, so this can return an error code. 405 */ 406 int (*disable_usb3_lpm_timeout)(struct usb_hcd *, 407 struct usb_device *, enum usb3_link_state state); 408 int (*find_raw_port_number)(struct usb_hcd *, int); 409 /* Call for power on/off the port if necessary */ 410 int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable); 411 412 }; 413 414 static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd) 415 { 416 return hcd->driver->flags & HCD_BH; 417 } 418 419 static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd, 420 struct usb_host_endpoint *ep) 421 { 422 return hcd->high_prio_bh.completing_ep == ep; 423 } 424 425 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); 426 extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, 427 int status); 428 extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb); 429 430 extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags); 431 extern int usb_hcd_unlink_urb(struct urb *urb, int status); 432 extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, 433 int status); 434 extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, 435 gfp_t mem_flags); 436 extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *); 437 extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *); 438 extern void usb_hcd_flush_endpoint(struct usb_device *udev, 439 struct usb_host_endpoint *ep); 440 extern void usb_hcd_disable_endpoint(struct usb_device *udev, 441 struct usb_host_endpoint *ep); 442 extern void usb_hcd_reset_endpoint(struct usb_device *udev, 443 struct usb_host_endpoint *ep); 444 extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); 445 extern int usb_hcd_alloc_bandwidth(struct usb_device *udev, 446 struct usb_host_config *new_config, 447 struct usb_host_interface *old_alt, 448 struct usb_host_interface *new_alt); 449 extern int usb_hcd_get_frame_number(struct usb_device *udev); 450 451 struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, 452 struct device *sysdev, struct device *dev, const char *bus_name, 453 struct usb_hcd *primary_hcd); 454 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, 455 struct device *dev, const char *bus_name); 456 extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, 457 struct device *dev, const char *bus_name, 458 struct usb_hcd *shared_hcd); 459 extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd); 460 extern void usb_put_hcd(struct usb_hcd *hcd); 461 extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd); 462 extern int usb_add_hcd(struct usb_hcd *hcd, 463 unsigned int irqnum, unsigned long irqflags); 464 extern void usb_remove_hcd(struct usb_hcd *hcd); 465 extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1); 466 int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr, 467 dma_addr_t dma, size_t size); 468 469 struct platform_device; 470 extern void usb_hcd_platform_shutdown(struct platform_device *dev); 471 472 #ifdef CONFIG_USB_PCI 473 struct pci_dev; 474 struct pci_device_id; 475 extern int usb_hcd_pci_probe(struct pci_dev *dev, 476 const struct pci_device_id *id); 477 extern void usb_hcd_pci_remove(struct pci_dev *dev); 478 extern void usb_hcd_pci_shutdown(struct pci_dev *dev); 479 480 extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); 481 482 #ifdef CONFIG_PM 483 extern const struct dev_pm_ops usb_hcd_pci_pm_ops; 484 #endif 485 #endif /* CONFIG_USB_PCI */ 486 487 /* pci-ish (pdev null is ok) buffer alloc/mapping support */ 488 void usb_init_pool_max(void); 489 int hcd_buffer_create(struct usb_hcd *hcd); 490 void hcd_buffer_destroy(struct usb_hcd *hcd); 491 492 void *hcd_buffer_alloc(struct usb_bus *bus, size_t size, 493 gfp_t mem_flags, dma_addr_t *dma); 494 void hcd_buffer_free(struct usb_bus *bus, size_t size, 495 void *addr, dma_addr_t dma); 496 497 /* generic bus glue, needed for host controllers that don't use PCI */ 498 extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); 499 500 extern void usb_hc_died(struct usb_hcd *hcd); 501 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); 502 extern void usb_wakeup_notification(struct usb_device *hdev, 503 unsigned int portnum); 504 505 extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum); 506 extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum); 507 508 /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ 509 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) 510 #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) 511 #define usb_settoggle(dev, ep, out, bit) \ 512 ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ 513 ((bit) << (ep))) 514 515 /* -------------------------------------------------------------------------- */ 516 517 /* Enumeration is only for the hub driver, or HCD virtual root hubs */ 518 extern struct usb_device *usb_alloc_dev(struct usb_device *parent, 519 struct usb_bus *, unsigned port); 520 extern int usb_new_device(struct usb_device *dev); 521 extern void usb_disconnect(struct usb_device **); 522 523 extern int usb_get_configuration(struct usb_device *dev); 524 extern void usb_destroy_configuration(struct usb_device *dev); 525 526 /*-------------------------------------------------------------------------*/ 527 528 /* 529 * HCD Root Hub support 530 */ 531 532 #include <linux/usb/ch11.h> 533 534 /* 535 * As of USB 2.0, full/low speed devices are segregated into trees. 536 * One type grows from USB 1.1 host controllers (OHCI, UHCI etc). 537 * The other type grows from high speed hubs when they connect to 538 * full/low speed devices using "Transaction Translators" (TTs). 539 * 540 * TTs should only be known to the hub driver, and high speed bus 541 * drivers (only EHCI for now). They affect periodic scheduling and 542 * sometimes control/bulk error recovery. 543 */ 544 545 struct usb_device; 546 547 struct usb_tt { 548 struct usb_device *hub; /* upstream highspeed hub */ 549 int multi; /* true means one TT per port */ 550 unsigned think_time; /* think time in ns */ 551 void *hcpriv; /* HCD private data */ 552 553 /* for control/bulk error recovery (CLEAR_TT_BUFFER) */ 554 spinlock_t lock; 555 struct list_head clear_list; /* of usb_tt_clear */ 556 struct work_struct clear_work; 557 }; 558 559 struct usb_tt_clear { 560 struct list_head clear_list; 561 unsigned tt; 562 u16 devinfo; 563 struct usb_hcd *hcd; 564 struct usb_host_endpoint *ep; 565 }; 566 567 extern int usb_hub_clear_tt_buffer(struct urb *urb); 568 extern void usb_ep0_reinit(struct usb_device *); 569 570 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */ 571 #define DeviceRequest \ 572 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) 573 #define DeviceOutRequest \ 574 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) 575 576 #define InterfaceRequest \ 577 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) 578 579 #define EndpointRequest \ 580 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) 581 #define EndpointOutRequest \ 582 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8) 583 584 /* class requests from the USB 2.0 hub spec, table 11-15 */ 585 #define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request)) 586 /* GetBusState and SetHubDescriptor are optional, omitted */ 587 #define ClearHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_CLEAR_FEATURE) 588 #define ClearPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_CLEAR_FEATURE) 589 #define GetHubDescriptor HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_DESCRIPTOR) 590 #define GetHubStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_STATUS) 591 #define GetPortStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, USB_REQ_GET_STATUS) 592 #define SetHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_SET_FEATURE) 593 #define SetPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_SET_FEATURE) 594 595 596 /*-------------------------------------------------------------------------*/ 597 598 /* class requests from USB 3.1 hub spec, table 10-7 */ 599 #define SetHubDepth HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, HUB_SET_DEPTH) 600 #define GetPortErrorCount HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_PORT_ERR_COUNT) 601 602 /* 603 * Generic bandwidth allocation constants/support 604 */ 605 #define FRAME_TIME_USECS 1000L 606 #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */ 607 /* Trying not to use worst-case bit-stuffing 608 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */ 609 /* bytecount = data payload byte count */ 610 611 #define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L) 612 /* convert nanoseconds to microseconds, rounding up */ 613 614 /* 615 * Full/low speed bandwidth allocation constants/support. 616 */ 617 #define BW_HOST_DELAY 1000L /* nanoseconds */ 618 #define BW_HUB_LS_SETUP 333L /* nanoseconds */ 619 /* 4 full-speed bit times (est.) */ 620 621 #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */ 622 #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L) 623 #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L) 624 625 /* 626 * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed 627 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed 628 * to preallocate bandwidth) 629 */ 630 #define USB2_HOST_DELAY 5 /* nsec, guess */ 631 #define HS_NSECS(bytes) (((55 * 8 * 2083) \ 632 + (2083UL * (3 + BitTime(bytes))))/1000 \ 633 + USB2_HOST_DELAY) 634 #define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \ 635 + (2083UL * (3 + BitTime(bytes))))/1000 \ 636 + USB2_HOST_DELAY) 637 #define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes)) 638 #define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes)) 639 640 extern long usb_calc_bus_time(int speed, int is_input, 641 int isoc, int bytecount); 642 643 /*-------------------------------------------------------------------------*/ 644 645 extern void usb_set_device_state(struct usb_device *udev, 646 enum usb_device_state new_state); 647 648 /*-------------------------------------------------------------------------*/ 649 650 /* exported only within usbcore */ 651 652 extern struct idr usb_bus_idr; 653 extern struct mutex usb_bus_idr_lock; 654 extern wait_queue_head_t usb_kill_urb_queue; 655 656 657 #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) 658 659 #ifdef CONFIG_PM 660 extern unsigned usb_wakeup_enabled_descendants(struct usb_device *udev); 661 extern void usb_root_hub_lost_power(struct usb_device *rhdev); 662 extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); 663 extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); 664 extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); 665 #else 666 static inline unsigned usb_wakeup_enabled_descendants(struct usb_device *udev) 667 { 668 return 0; 669 } 670 static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) 671 { 672 return; 673 } 674 #endif /* CONFIG_PM */ 675 676 /*-------------------------------------------------------------------------*/ 677 678 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) 679 680 struct usb_mon_operations { 681 void (*urb_submit)(struct usb_bus *bus, struct urb *urb); 682 void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err); 683 void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status); 684 /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ 685 }; 686 687 extern const struct usb_mon_operations *mon_ops; 688 689 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) 690 { 691 if (bus->monitored) 692 (*mon_ops->urb_submit)(bus, urb); 693 } 694 695 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, 696 int error) 697 { 698 if (bus->monitored) 699 (*mon_ops->urb_submit_error)(bus, urb, error); 700 } 701 702 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, 703 int status) 704 { 705 if (bus->monitored) 706 (*mon_ops->urb_complete)(bus, urb, status); 707 } 708 709 int usb_mon_register(const struct usb_mon_operations *ops); 710 void usb_mon_deregister(void); 711 712 #else 713 714 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {} 715 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, 716 int error) {} 717 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, 718 int status) {} 719 720 #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */ 721 722 /*-------------------------------------------------------------------------*/ 723 724 /* random stuff */ 725 726 #define RUN_CONTEXT (in_irq() ? "in_irq" \ 727 : (in_interrupt() ? "in_interrupt" : "can sleep")) 728 729 730 /* This rwsem is for use only by the hub driver and ehci-hcd. 731 * Nobody else should touch it. 732 */ 733 extern struct rw_semaphore ehci_cf_port_reset_rwsem; 734 735 /* Keep track of which host controller drivers are loaded */ 736 #define USB_UHCI_LOADED 0 737 #define USB_OHCI_LOADED 1 738 #define USB_EHCI_LOADED 2 739 extern unsigned long usb_hcds_loaded; 740 741 #endif /* __KERNEL__ */ 742 743 #endif /* __USB_CORE_HCD_H */ 744