1 /* 2 * linux/drivers/char/serial_core.h 3 * 4 * Copyright (C) 2000 Deep Blue Solutions Ltd. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 19 */ 20 #ifndef LINUX_SERIAL_CORE_H 21 #define LINUX_SERIAL_CORE_H 22 23 /* 24 * The type definitions. These are from Ted Ts'o's serial.h 25 */ 26 #define PORT_UNKNOWN 0 27 #define PORT_8250 1 28 #define PORT_16450 2 29 #define PORT_16550 3 30 #define PORT_16550A 4 31 #define PORT_CIRRUS 5 32 #define PORT_16650 6 33 #define PORT_16650V2 7 34 #define PORT_16750 8 35 #define PORT_STARTECH 9 36 #define PORT_16C950 10 37 #define PORT_16654 11 38 #define PORT_16850 12 39 #define PORT_RSA 13 40 #define PORT_NS16550A 14 41 #define PORT_XSCALE 15 42 #define PORT_MAX_8250 15 /* max port ID */ 43 44 /* 45 * ARM specific type numbers. These are not currently guaranteed 46 * to be implemented, and will change in the future. These are 47 * separate so any additions to the old serial.c that occur before 48 * we are merged can be easily merged here. 49 */ 50 #define PORT_PXA 31 51 #define PORT_AMBA 32 52 #define PORT_CLPS711X 33 53 #define PORT_SA1100 34 54 #define PORT_UART00 35 55 #define PORT_21285 37 56 57 /* Sparc type numbers. */ 58 #define PORT_SUNZILOG 38 59 #define PORT_SUNSAB 39 60 61 /* NEC v850. */ 62 #define PORT_V850E_UART 40 63 64 /* DZ */ 65 #define PORT_DZ 47 66 67 /* Parisc type numbers. */ 68 #define PORT_MUX 48 69 70 /* Atmel AT91xxx SoC */ 71 #define PORT_AT91 49 72 73 /* Macintosh Zilog type numbers */ 74 #define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */ 75 #define PORT_PMAC_ZILOG 51 76 77 /* SH-SCI */ 78 #define PORT_SCI 52 79 #define PORT_SCIF 53 80 #define PORT_IRDA 54 81 82 /* Samsung S3C2410 SoC and derivatives thereof */ 83 #define PORT_S3C2410 55 84 85 /* SGI IP22 aka Indy / Challenge S / Indigo 2 */ 86 #define PORT_IP22ZILOG 56 87 88 /* Sharp LH7a40x -- an ARM9 SoC series */ 89 #define PORT_LH7A40X 57 90 91 /* PPC CPM type number */ 92 #define PORT_CPM 58 93 94 /* MPC52xx type numbers */ 95 #define PORT_MPC52xx 59 96 97 /* IBM icom */ 98 #define PORT_ICOM 60 99 100 /* Samsung S3C2440 SoC */ 101 #define PORT_S3C2440 61 102 103 /* Motorola i.MX SoC */ 104 #define PORT_IMX 62 105 106 /* Marvell MPSC */ 107 #define PORT_MPSC 63 108 109 /* TXX9 type number */ 110 #define PORT_TXX9 64 111 112 /* NEC VR4100 series SIU/DSIU */ 113 #define PORT_VR41XX_SIU 65 114 #define PORT_VR41XX_DSIU 66 115 116 /* Samsung S3C2400 SoC */ 117 #define PORT_S3C2400 67 118 119 /* M32R SIO */ 120 #define PORT_M32R_SIO 68 121 122 /*Digi jsm */ 123 #define PORT_JSM 69 124 125 #define PORT_IP3106 70 126 127 /* Hilscher netx */ 128 #define PORT_NETX 71 129 130 /* SUN4V Hypervisor Console */ 131 #define PORT_SUNHV 72 132 133 #ifdef __KERNEL__ 134 135 #include <linux/compiler.h> 136 #include <linux/interrupt.h> 137 #include <linux/circ_buf.h> 138 #include <linux/spinlock.h> 139 #include <linux/sched.h> 140 #include <linux/tty.h> 141 #include <linux/mutex.h> 142 143 struct uart_port; 144 struct uart_info; 145 struct serial_struct; 146 struct device; 147 148 /* 149 * This structure describes all the operations that can be 150 * done on the physical hardware. 151 */ 152 struct uart_ops { 153 unsigned int (*tx_empty)(struct uart_port *); 154 void (*set_mctrl)(struct uart_port *, unsigned int mctrl); 155 unsigned int (*get_mctrl)(struct uart_port *); 156 void (*stop_tx)(struct uart_port *); 157 void (*start_tx)(struct uart_port *); 158 void (*send_xchar)(struct uart_port *, char ch); 159 void (*stop_rx)(struct uart_port *); 160 void (*enable_ms)(struct uart_port *); 161 void (*break_ctl)(struct uart_port *, int ctl); 162 int (*startup)(struct uart_port *); 163 void (*shutdown)(struct uart_port *); 164 void (*set_termios)(struct uart_port *, struct termios *new, 165 struct termios *old); 166 void (*pm)(struct uart_port *, unsigned int state, 167 unsigned int oldstate); 168 int (*set_wake)(struct uart_port *, unsigned int state); 169 170 /* 171 * Return a string describing the type of the port 172 */ 173 const char *(*type)(struct uart_port *); 174 175 /* 176 * Release IO and memory resources used by the port. 177 * This includes iounmap if necessary. 178 */ 179 void (*release_port)(struct uart_port *); 180 181 /* 182 * Request IO and memory resources used by the port. 183 * This includes iomapping the port if necessary. 184 */ 185 int (*request_port)(struct uart_port *); 186 void (*config_port)(struct uart_port *, int); 187 int (*verify_port)(struct uart_port *, struct serial_struct *); 188 int (*ioctl)(struct uart_port *, unsigned int, unsigned long); 189 }; 190 191 #define UART_CONFIG_TYPE (1 << 0) 192 #define UART_CONFIG_IRQ (1 << 1) 193 194 struct uart_icount { 195 __u32 cts; 196 __u32 dsr; 197 __u32 rng; 198 __u32 dcd; 199 __u32 rx; 200 __u32 tx; 201 __u32 frame; 202 __u32 overrun; 203 __u32 parity; 204 __u32 brk; 205 __u32 buf_overrun; 206 }; 207 208 typedef unsigned int __bitwise__ upf_t; 209 210 struct uart_port { 211 spinlock_t lock; /* port lock */ 212 unsigned int iobase; /* in/out[bwl] */ 213 unsigned char __iomem *membase; /* read/write[bwl] */ 214 unsigned int irq; /* irq number */ 215 unsigned int uartclk; /* base uart clock */ 216 unsigned char fifosize; /* tx fifo size */ 217 unsigned char x_char; /* xon/xoff char */ 218 unsigned char regshift; /* reg offset shift */ 219 unsigned char iotype; /* io access style */ 220 221 #define UPIO_PORT (0) 222 #define UPIO_HUB6 (1) 223 #define UPIO_MEM (2) 224 #define UPIO_MEM32 (3) 225 #define UPIO_AU (4) /* Au1x00 type IO */ 226 227 unsigned int read_status_mask; /* driver specific */ 228 unsigned int ignore_status_mask; /* driver specific */ 229 struct uart_info *info; /* pointer to parent info */ 230 struct uart_icount icount; /* statistics */ 231 232 struct console *cons; /* struct console, if any */ 233 #ifdef CONFIG_SERIAL_CORE_CONSOLE 234 unsigned long sysrq; /* sysrq timeout */ 235 #endif 236 237 upf_t flags; 238 239 #define UPF_FOURPORT ((__force upf_t) (1 << 1)) 240 #define UPF_SAK ((__force upf_t) (1 << 2)) 241 #define UPF_SPD_MASK ((__force upf_t) (0x1030)) 242 #define UPF_SPD_HI ((__force upf_t) (0x0010)) 243 #define UPF_SPD_VHI ((__force upf_t) (0x0020)) 244 #define UPF_SPD_CUST ((__force upf_t) (0x0030)) 245 #define UPF_SPD_SHI ((__force upf_t) (0x1000)) 246 #define UPF_SPD_WARP ((__force upf_t) (0x1010)) 247 #define UPF_SKIP_TEST ((__force upf_t) (1 << 6)) 248 #define UPF_AUTO_IRQ ((__force upf_t) (1 << 7)) 249 #define UPF_HARDPPS_CD ((__force upf_t) (1 << 11)) 250 #define UPF_LOW_LATENCY ((__force upf_t) (1 << 13)) 251 #define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) 252 #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) 253 #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) 254 #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) 255 #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) 256 #define UPF_DEAD ((__force upf_t) (1 << 30)) 257 #define UPF_IOREMAP ((__force upf_t) (1 << 31)) 258 259 #define UPF_CHANGE_MASK ((__force upf_t) (0x17fff)) 260 #define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY)) 261 262 unsigned int mctrl; /* current modem ctrl settings */ 263 unsigned int timeout; /* character-based timeout */ 264 unsigned int type; /* port type */ 265 const struct uart_ops *ops; 266 unsigned int custom_divisor; 267 unsigned int line; /* port index */ 268 unsigned long mapbase; /* for ioremap */ 269 struct device *dev; /* parent device */ 270 unsigned char hub6; /* this should be in the 8250 driver */ 271 unsigned char unused[3]; 272 }; 273 274 /* 275 * This is the state information which is persistent across opens. 276 * The low level driver must not to touch any elements contained 277 * within. 278 */ 279 struct uart_state { 280 unsigned int close_delay; /* msec */ 281 unsigned int closing_wait; /* msec */ 282 283 #define USF_CLOSING_WAIT_INF (0) 284 #define USF_CLOSING_WAIT_NONE (~0U) 285 286 int count; 287 int pm_state; 288 struct uart_info *info; 289 struct uart_port *port; 290 291 struct mutex mutex; 292 }; 293 294 #define UART_XMIT_SIZE PAGE_SIZE 295 296 typedef unsigned int __bitwise__ uif_t; 297 298 /* 299 * This is the state information which is only valid when the port 300 * is open; it may be freed by the core driver once the device has 301 * been closed. Either the low level driver or the core can modify 302 * stuff here. 303 */ 304 struct uart_info { 305 struct tty_struct *tty; 306 struct circ_buf xmit; 307 uif_t flags; 308 309 /* 310 * Definitions for info->flags. These are _private_ to serial_core, and 311 * are specific to this structure. They may be queried by low level drivers. 312 */ 313 #define UIF_CHECK_CD ((__force uif_t) (1 << 25)) 314 #define UIF_CTS_FLOW ((__force uif_t) (1 << 26)) 315 #define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29)) 316 #define UIF_INITIALIZED ((__force uif_t) (1 << 31)) 317 318 int blocked_open; 319 320 struct tasklet_struct tlet; 321 322 wait_queue_head_t open_wait; 323 wait_queue_head_t delta_msr_wait; 324 }; 325 326 /* number of characters left in xmit buffer before we ask for more */ 327 #define WAKEUP_CHARS 256 328 329 struct module; 330 struct tty_driver; 331 332 struct uart_driver { 333 struct module *owner; 334 const char *driver_name; 335 const char *dev_name; 336 const char *devfs_name; 337 int major; 338 int minor; 339 int nr; 340 struct console *cons; 341 342 /* 343 * these are private; the low level driver should not 344 * touch these; they should be initialised to NULL 345 */ 346 struct uart_state *state; 347 struct tty_driver *tty_driver; 348 }; 349 350 void uart_write_wakeup(struct uart_port *port); 351 352 /* 353 * Baud rate helpers. 354 */ 355 void uart_update_timeout(struct uart_port *port, unsigned int cflag, 356 unsigned int baud); 357 unsigned int uart_get_baud_rate(struct uart_port *port, struct termios *termios, 358 struct termios *old, unsigned int min, 359 unsigned int max); 360 unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud); 361 362 /* 363 * Console helpers. 364 */ 365 struct uart_port *uart_get_console(struct uart_port *ports, int nr, 366 struct console *c); 367 void uart_parse_options(char *options, int *baud, int *parity, int *bits, 368 int *flow); 369 int uart_set_options(struct uart_port *port, struct console *co, int baud, 370 int parity, int bits, int flow); 371 struct tty_driver *uart_console_device(struct console *co, int *index); 372 void uart_console_write(struct uart_port *port, const char *s, 373 unsigned int count, 374 void (*putchar)(struct uart_port *, int)); 375 376 /* 377 * Port/driver registration/removal 378 */ 379 int uart_register_driver(struct uart_driver *uart); 380 void uart_unregister_driver(struct uart_driver *uart); 381 int uart_add_one_port(struct uart_driver *reg, struct uart_port *port); 382 int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port); 383 int uart_match_port(struct uart_port *port1, struct uart_port *port2); 384 385 /* 386 * Power Management 387 */ 388 int uart_suspend_port(struct uart_driver *reg, struct uart_port *port); 389 int uart_resume_port(struct uart_driver *reg, struct uart_port *port); 390 391 #define uart_circ_empty(circ) ((circ)->head == (circ)->tail) 392 #define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0) 393 394 #define uart_circ_chars_pending(circ) \ 395 (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE)) 396 397 #define uart_circ_chars_free(circ) \ 398 (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE)) 399 400 #define uart_tx_stopped(port) \ 401 ((port)->info->tty->stopped || (port)->info->tty->hw_stopped) 402 403 /* 404 * The following are helper functions for the low level drivers. 405 */ 406 static inline int 407 uart_handle_sysrq_char(struct uart_port *port, unsigned int ch, 408 struct pt_regs *regs) 409 { 410 #ifdef SUPPORT_SYSRQ 411 if (port->sysrq) { 412 if (ch && time_before(jiffies, port->sysrq)) { 413 handle_sysrq(ch, regs, NULL); 414 port->sysrq = 0; 415 return 1; 416 } 417 port->sysrq = 0; 418 } 419 #endif 420 return 0; 421 } 422 #ifndef SUPPORT_SYSRQ 423 #define uart_handle_sysrq_char(port,ch,regs) uart_handle_sysrq_char(port, 0, NULL) 424 #endif 425 426 /* 427 * We do the SysRQ and SAK checking like this... 428 */ 429 static inline int uart_handle_break(struct uart_port *port) 430 { 431 struct uart_info *info = port->info; 432 #ifdef SUPPORT_SYSRQ 433 if (port->cons && port->cons->index == port->line) { 434 if (!port->sysrq) { 435 port->sysrq = jiffies + HZ*5; 436 return 1; 437 } 438 port->sysrq = 0; 439 } 440 #endif 441 if (port->flags & UPF_SAK) 442 do_SAK(info->tty); 443 return 0; 444 } 445 446 /** 447 * uart_handle_dcd_change - handle a change of carrier detect state 448 * @port: uart_port structure for the open port 449 * @status: new carrier detect status, nonzero if active 450 */ 451 static inline void 452 uart_handle_dcd_change(struct uart_port *port, unsigned int status) 453 { 454 struct uart_info *info = port->info; 455 456 port->icount.dcd++; 457 458 #ifdef CONFIG_HARD_PPS 459 if ((port->flags & UPF_HARDPPS_CD) && status) 460 hardpps(); 461 #endif 462 463 if (info->flags & UIF_CHECK_CD) { 464 if (status) 465 wake_up_interruptible(&info->open_wait); 466 else if (info->tty) 467 tty_hangup(info->tty); 468 } 469 } 470 471 /** 472 * uart_handle_cts_change - handle a change of clear-to-send state 473 * @port: uart_port structure for the open port 474 * @status: new clear to send status, nonzero if active 475 */ 476 static inline void 477 uart_handle_cts_change(struct uart_port *port, unsigned int status) 478 { 479 struct uart_info *info = port->info; 480 struct tty_struct *tty = info->tty; 481 482 port->icount.cts++; 483 484 if (info->flags & UIF_CTS_FLOW) { 485 if (tty->hw_stopped) { 486 if (status) { 487 tty->hw_stopped = 0; 488 port->ops->start_tx(port); 489 uart_write_wakeup(port); 490 } 491 } else { 492 if (!status) { 493 tty->hw_stopped = 1; 494 port->ops->stop_tx(port); 495 } 496 } 497 } 498 } 499 500 #include <linux/tty_flip.h> 501 502 static inline void 503 uart_insert_char(struct uart_port *port, unsigned int status, 504 unsigned int overrun, unsigned int ch, unsigned int flag) 505 { 506 struct tty_struct *tty = port->info->tty; 507 508 if ((status & port->ignore_status_mask & ~overrun) == 0) 509 tty_insert_flip_char(tty, ch, flag); 510 511 /* 512 * Overrun is special. Since it's reported immediately, 513 * it doesn't affect the current character. 514 */ 515 if (status & ~port->ignore_status_mask & overrun) 516 tty_insert_flip_char(tty, 0, TTY_OVERRUN); 517 } 518 519 /* 520 * UART_ENABLE_MS - determine if port should enable modem status irqs 521 */ 522 #define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \ 523 (cflag) & CRTSCTS || \ 524 !((cflag) & CLOCAL)) 525 526 #endif 527 528 #endif /* LINUX_SERIAL_CORE_H */ 529