xref: /linux-6.15/include/linux/serial_8250.h (revision f5e4e7fd)
1 /*
2  *  linux/include/linux/serial_8250.h
3  *
4  *  Copyright (C) 2004 Russell King
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  */
11 #ifndef _LINUX_SERIAL_8250_H
12 #define _LINUX_SERIAL_8250_H
13 
14 #include <linux/serial_core.h>
15 #include <linux/platform_device.h>
16 
17 /*
18  * This is the platform device platform_data structure
19  */
20 struct plat_serial8250_port {
21 	unsigned long	iobase;		/* io base address */
22 	void __iomem	*membase;	/* ioremap cookie or NULL */
23 	resource_size_t	mapbase;	/* resource base */
24 	unsigned int	irq;		/* interrupt number */
25 	unsigned long	irqflags;	/* request_irq flags */
26 	unsigned int	uartclk;	/* UART clock rate */
27 	void            *private_data;
28 	unsigned char	regshift;	/* register shift */
29 	unsigned char	iotype;		/* UPIO_* */
30 	unsigned char	hub6;
31 	upf_t		flags;		/* UPF_* flags */
32 	unsigned int	type;		/* If UPF_FIXED_TYPE */
33 	unsigned int	(*serial_in)(struct uart_port *, int);
34 	void		(*serial_out)(struct uart_port *, int, int);
35 	void		(*set_termios)(struct uart_port *,
36 			               struct ktermios *new,
37 			               struct ktermios *old);
38 	int		(*handle_irq)(struct uart_port *);
39 	void		(*pm)(struct uart_port *, unsigned int state,
40 			      unsigned old);
41 	void		(*handle_break)(struct uart_port *);
42 };
43 
44 /*
45  * Allocate 8250 platform device IDs.  Nothing is implied by
46  * the numbering here, except for the legacy entry being -1.
47  */
48 enum {
49 	PLAT8250_DEV_LEGACY = -1,
50 	PLAT8250_DEV_PLATFORM,
51 	PLAT8250_DEV_PLATFORM1,
52 	PLAT8250_DEV_PLATFORM2,
53 	PLAT8250_DEV_FOURPORT,
54 	PLAT8250_DEV_ACCENT,
55 	PLAT8250_DEV_BOCA,
56 	PLAT8250_DEV_EXAR_ST16C554,
57 	PLAT8250_DEV_HUB6,
58 	PLAT8250_DEV_AU1X00,
59 	PLAT8250_DEV_SM501,
60 };
61 
62 struct uart_8250_dma;
63 
64 /*
65  * This should be used by drivers which want to register
66  * their own 8250 ports without registering their own
67  * platform device.  Using these will make your driver
68  * dependent on the 8250 driver.
69  */
70 
71 struct uart_8250_port {
72 	struct uart_port	port;
73 	struct timer_list	timer;		/* "no irq" timer */
74 	struct list_head	list;		/* ports on this IRQ */
75 	unsigned short		capabilities;	/* port capabilities */
76 	unsigned short		bugs;		/* port bugs */
77 	unsigned int		tx_loadsz;	/* transmit fifo load size */
78 	unsigned char		acr;
79 	unsigned char		ier;
80 	unsigned char		lcr;
81 	unsigned char		mcr;
82 	unsigned char		mcr_mask;	/* mask of user bits */
83 	unsigned char		mcr_force;	/* mask of forced bits */
84 	unsigned char		cur_iotype;	/* Running I/O type */
85 
86 	/*
87 	 * Some bits in registers are cleared on a read, so they must
88 	 * be saved whenever the register is read but the bits will not
89 	 * be immediately processed.
90 	 */
91 #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
92 	unsigned char		lsr_saved_flags;
93 #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
94 	unsigned char		msr_saved_flags;
95 
96 	struct uart_8250_dma	*dma;
97 
98 	/* 8250 specific callbacks */
99 	int			(*dl_read)(struct uart_8250_port *);
100 	void			(*dl_write)(struct uart_8250_port *, int);
101 };
102 
103 int serial8250_register_8250_port(struct uart_8250_port *);
104 void serial8250_unregister_port(int line);
105 void serial8250_suspend_port(int line);
106 void serial8250_resume_port(int line);
107 
108 extern int early_serial_setup(struct uart_port *port);
109 
110 extern int serial8250_find_port(struct uart_port *p);
111 extern int serial8250_find_port_for_earlycon(void);
112 extern unsigned int serial8250_early_in(struct uart_port *port, int offset);
113 extern void serial8250_early_out(struct uart_port *port, int offset, int value);
114 extern int setup_early_serial8250_console(char *cmdline);
115 extern void serial8250_do_set_termios(struct uart_port *port,
116 		struct ktermios *termios, struct ktermios *old);
117 extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
118 			     unsigned int oldstate);
119 extern int fsl8250_handle_irq(struct uart_port *port);
120 int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
121 unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
122 void serial8250_tx_chars(struct uart_8250_port *up);
123 unsigned int serial8250_modem_status(struct uart_8250_port *up);
124 
125 extern void serial8250_set_isa_configurator(void (*v)
126 					(int port, struct uart_port *up,
127 						unsigned short *capabilities));
128 
129 #endif
130