1 #ifndef __RFKILL_H 2 #define __RFKILL_H 3 4 /* 5 * Copyright (C) 2006 - 2007 Ivo van Doorn 6 * Copyright (C) 2007 Dmitry Torokhov 7 * Copyright 2009 Johannes Berg <[email protected]> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the 21 * Free Software Foundation, Inc., 22 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 23 */ 24 25 #include <linux/types.h> 26 27 /* define userspace visible states */ 28 #define RFKILL_STATE_SOFT_BLOCKED 0 29 #define RFKILL_STATE_UNBLOCKED 1 30 #define RFKILL_STATE_HARD_BLOCKED 2 31 32 /** 33 * enum rfkill_type - type of rfkill switch. 34 * 35 * @RFKILL_TYPE_ALL: toggles all switches (userspace only) 36 * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. 37 * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. 38 * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. 39 * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. 40 * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. 41 * @NUM_RFKILL_TYPES: number of defined rfkill types 42 */ 43 enum rfkill_type { 44 RFKILL_TYPE_ALL = 0, 45 RFKILL_TYPE_WLAN, 46 RFKILL_TYPE_BLUETOOTH, 47 RFKILL_TYPE_UWB, 48 RFKILL_TYPE_WIMAX, 49 RFKILL_TYPE_WWAN, 50 NUM_RFKILL_TYPES, 51 }; 52 53 /** 54 * enum rfkill_operation - operation types 55 * @RFKILL_OP_ADD: a device was added 56 * @RFKILL_OP_DEL: a device was removed 57 * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device 58 * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) 59 */ 60 enum rfkill_operation { 61 RFKILL_OP_ADD = 0, 62 RFKILL_OP_DEL, 63 RFKILL_OP_CHANGE, 64 RFKILL_OP_CHANGE_ALL, 65 }; 66 67 /** 68 * struct rfkill_event - events for userspace on /dev/rfkill 69 * @idx: index of dev rfkill 70 * @type: type of the rfkill struct 71 * @op: operation code 72 * @hard: hard state (0/1) 73 * @soft: soft state (0/1) 74 * 75 * Structure used for userspace communication on /dev/rfkill, 76 * used for events from the kernel and control to the kernel. 77 */ 78 struct rfkill_event { 79 __u32 idx; 80 __u8 type; 81 __u8 op; 82 __u8 soft, hard; 83 } __packed; 84 85 /* ioctl for turning off rfkill-input (if present) */ 86 #define RFKILL_IOC_MAGIC 'R' 87 #define RFKILL_IOC_NOINPUT 1 88 #define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) 89 90 /* and that's all userspace gets */ 91 #ifdef __KERNEL__ 92 /* don't allow anyone to use these in the kernel */ 93 enum rfkill_user_states { 94 RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, 95 RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, 96 RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, 97 }; 98 #undef RFKILL_STATE_SOFT_BLOCKED 99 #undef RFKILL_STATE_UNBLOCKED 100 #undef RFKILL_STATE_HARD_BLOCKED 101 102 #include <linux/types.h> 103 #include <linux/kernel.h> 104 #include <linux/list.h> 105 #include <linux/mutex.h> 106 #include <linux/device.h> 107 #include <linux/leds.h> 108 #include <linux/err.h> 109 110 /* this is opaque */ 111 struct rfkill; 112 113 /** 114 * struct rfkill_ops - rfkill driver methods 115 * 116 * @poll: poll the rfkill block state(s) -- only assign this method 117 * when you need polling. When called, simply call one of the 118 * rfkill_set{,_hw,_sw}_state family of functions. If the hw 119 * is getting unblocked you need to take into account the return 120 * value of those functions to make sure the software block is 121 * properly used. 122 * @query: query the rfkill block state(s) and call exactly one of the 123 * rfkill_set{,_hw,_sw}_state family of functions. Assign this 124 * method if input events can cause hardware state changes to make 125 * the rfkill core query your driver before setting a requested 126 * block. 127 * @set_block: turn the transmitter on (blocked == false) or off 128 * (blocked == true) -- ignore and return 0 when hard blocked. 129 * This callback must be assigned. 130 */ 131 struct rfkill_ops { 132 void (*poll)(struct rfkill *rfkill, void *data); 133 void (*query)(struct rfkill *rfkill, void *data); 134 int (*set_block)(void *data, bool blocked); 135 }; 136 137 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) 138 /** 139 * rfkill_alloc - allocate rfkill structure 140 * @name: name of the struct -- the string is not copied internally 141 * @parent: device that has rf switch on it 142 * @type: type of the switch (RFKILL_TYPE_*) 143 * @ops: rfkill methods 144 * @ops_data: data passed to each method 145 * 146 * This function should be called by the transmitter driver to allocate an 147 * rfkill structure. Returns %NULL on failure. 148 */ 149 struct rfkill * __must_check rfkill_alloc(const char *name, 150 struct device *parent, 151 const enum rfkill_type type, 152 const struct rfkill_ops *ops, 153 void *ops_data); 154 155 /** 156 * rfkill_register - Register a rfkill structure. 157 * @rfkill: rfkill structure to be registered 158 * 159 * This function should be called by the transmitter driver to register 160 * the rfkill structure. Before calling this function the driver needs 161 * to be ready to service method calls from rfkill. 162 * 163 * If the software blocked state is not set before registration, 164 * set_block will be called to initialize it to a default value. 165 * 166 * If the hardware blocked state is not set before registration, 167 * it is assumed to be unblocked. 168 */ 169 int __must_check rfkill_register(struct rfkill *rfkill); 170 171 /** 172 * rfkill_pause_polling(struct rfkill *rfkill) 173 * 174 * Pause polling -- say transmitter is off for other reasons. 175 * NOTE: not necessary for suspend/resume -- in that case the 176 * core stops polling anyway 177 */ 178 void rfkill_pause_polling(struct rfkill *rfkill); 179 180 /** 181 * rfkill_resume_polling(struct rfkill *rfkill) 182 * 183 * Pause polling -- say transmitter is off for other reasons. 184 * NOTE: not necessary for suspend/resume -- in that case the 185 * core stops polling anyway 186 */ 187 void rfkill_resume_polling(struct rfkill *rfkill); 188 189 190 /** 191 * rfkill_unregister - Unregister a rfkill structure. 192 * @rfkill: rfkill structure to be unregistered 193 * 194 * This function should be called by the network driver during device 195 * teardown to destroy rfkill structure. Until it returns, the driver 196 * needs to be able to service method calls. 197 */ 198 void rfkill_unregister(struct rfkill *rfkill); 199 200 /** 201 * rfkill_destroy - free rfkill structure 202 * @rfkill: rfkill structure to be destroyed 203 * 204 * Destroys the rfkill structure. 205 */ 206 void rfkill_destroy(struct rfkill *rfkill); 207 208 /** 209 * rfkill_set_hw_state - Set the internal rfkill hardware block state 210 * @rfkill: pointer to the rfkill class to modify. 211 * @state: the current hardware block state to set 212 * 213 * rfkill drivers that get events when the hard-blocked state changes 214 * use this function to notify the rfkill core (and through that also 215 * userspace) of the current state. They should also use this after 216 * resume if the state could have changed. 217 * 218 * You need not (but may) call this function if poll_state is assigned. 219 * 220 * This function can be called in any context, even from within rfkill 221 * callbacks. 222 * 223 * The function returns the combined block state (true if transmitter 224 * should be blocked) so that drivers need not keep track of the soft 225 * block state -- which they might not be able to. 226 */ 227 bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); 228 229 /** 230 * rfkill_set_sw_state - Set the internal rfkill software block state 231 * @rfkill: pointer to the rfkill class to modify. 232 * @state: the current software block state to set 233 * 234 * rfkill drivers that get events when the soft-blocked state changes 235 * (yes, some platforms directly act on input but allow changing again) 236 * use this function to notify the rfkill core (and through that also 237 * userspace) of the current state. It is not necessary to notify on 238 * resume; since hibernation can always change the soft-blocked state, 239 * the rfkill core will unconditionally restore the previous state. 240 * 241 * This function can be called in any context, even from within rfkill 242 * callbacks. 243 * 244 * The function returns the combined block state (true if transmitter 245 * should be blocked). 246 */ 247 bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked); 248 249 /** 250 * rfkill_set_states - Set the internal rfkill block states 251 * @rfkill: pointer to the rfkill class to modify. 252 * @sw: the current software block state to set 253 * @hw: the current hardware block state to set 254 * 255 * This function can be called in any context, even from within rfkill 256 * callbacks. 257 */ 258 void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw); 259 260 /** 261 * rfkill_blocked - query rfkill block 262 * 263 * @rfkill: rfkill struct to query 264 */ 265 bool rfkill_blocked(struct rfkill *rfkill); 266 #else /* !RFKILL */ 267 static inline struct rfkill * __must_check 268 rfkill_alloc(const char *name, 269 struct device *parent, 270 const enum rfkill_type type, 271 const struct rfkill_ops *ops, 272 void *ops_data) 273 { 274 return ERR_PTR(-ENODEV); 275 } 276 277 static inline int __must_check rfkill_register(struct rfkill *rfkill) 278 { 279 if (rfkill == ERR_PTR(-ENODEV)) 280 return 0; 281 return -EINVAL; 282 } 283 284 static inline void rfkill_pause_polling(struct rfkill *rfkill) 285 { 286 } 287 288 static inline void rfkill_resume_polling(struct rfkill *rfkill) 289 { 290 } 291 292 static inline void rfkill_unregister(struct rfkill *rfkill) 293 { 294 } 295 296 static inline void rfkill_destroy(struct rfkill *rfkill) 297 { 298 } 299 300 static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked) 301 { 302 return blocked; 303 } 304 305 static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) 306 { 307 return blocked; 308 } 309 310 static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw) 311 { 312 } 313 314 static inline bool rfkill_blocked(struct rfkill *rfkill) 315 { 316 return false; 317 } 318 #endif /* RFKILL || RFKILL_MODULE */ 319 320 321 #ifdef CONFIG_RFKILL_LEDS 322 /** 323 * rfkill_get_led_trigger_name - Get the LED trigger name for the button's LED. 324 * This function might return a NULL pointer if registering of the 325 * LED trigger failed. Use this as "default_trigger" for the LED. 326 */ 327 const char *rfkill_get_led_trigger_name(struct rfkill *rfkill); 328 329 /** 330 * rfkill_set_led_trigger_name -- set the LED trigger name 331 * @rfkill: rfkill struct 332 * @name: LED trigger name 333 * 334 * This function sets the LED trigger name of the radio LED 335 * trigger that rfkill creates. It is optional, but if called 336 * must be called before rfkill_register() to be effective. 337 */ 338 void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name); 339 #else 340 static inline const char *rfkill_get_led_trigger_name(struct rfkill *rfkill) 341 { 342 return NULL; 343 } 344 345 static inline void 346 rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) 347 { 348 } 349 #endif 350 351 #endif /* __KERNEL__ */ 352 353 #endif /* RFKILL_H */ 354