1 /* 2 * Copyright 2009 Texas Instruments. 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License as published by 6 * the Free Software Foundation; either version 2 of the License, or 7 * (at your option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software 16 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 17 */ 18 19 #ifndef __ARCH_ARM_DAVINCI_SPI_H 20 #define __ARCH_ARM_DAVINCI_SPI_H 21 22 #include <linux/platform_data/edma.h> 23 24 #define SPI_INTERN_CS 0xFF 25 26 enum { 27 SPI_VERSION_1, /* For DM355/DM365/DM6467 */ 28 SPI_VERSION_2, /* For DA8xx */ 29 }; 30 31 /** 32 * davinci_spi_platform_data - Platform data for SPI master device on DaVinci 33 * 34 * @version: version of the SPI IP. Different DaVinci devices have slightly 35 * varying versions of the same IP. 36 * @num_chipselect: number of chipselects supported by this SPI master 37 * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt 38 * controller withn the SoC. Possible values are 0 and 1. 39 * @cshold_bug: set this to true if the SPI controller on your chip requires 40 * a write to CSHOLD bit in between transfers (like in DM355). 41 * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any 42 * device on the bus. 43 */ 44 struct davinci_spi_platform_data { 45 u8 version; 46 u8 num_chipselect; 47 u8 intr_line; 48 u8 prescaler_limit; 49 bool cshold_bug; 50 enum dma_event_q dma_event_q; 51 }; 52 53 /** 54 * davinci_spi_config - Per-chip-select configuration for SPI slave devices 55 * 56 * @wdelay: amount of delay between transmissions. Measured in number of 57 * SPI module clocks. 58 * @odd_parity: polarity of parity flag at the end of transmit data stream. 59 * 0 - odd parity, 1 - even parity. 60 * @parity_enable: enable transmission of parity at end of each transmit 61 * data stream. 62 * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. 63 * @timer_disable: disable chip-select timers (setup and hold) 64 * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. 65 * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. 66 * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured 67 * in number of SPI clocks. 68 * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in 69 * number of SPI clocks. 70 */ 71 struct davinci_spi_config { 72 u8 wdelay; 73 u8 odd_parity; 74 u8 parity_enable; 75 #define SPI_IO_TYPE_INTR 0 76 #define SPI_IO_TYPE_POLL 1 77 #define SPI_IO_TYPE_DMA 2 78 u8 io_type; 79 u8 timer_disable; 80 u8 c2tdelay; 81 u8 t2cdelay; 82 u8 t2edelay; 83 u8 c2edelay; 84 }; 85 86 #endif /* __ARCH_ARM_DAVINCI_SPI_H */ 87