1 /* 2 * Standard pin control state definitions 3 */ 4 5 /** 6 * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put 7 * into as default, usually this means the pins are up and ready to 8 * be used by the device driver. This state is commonly used by 9 * hogs to configure muxing and pins at boot. 10 * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into 11 * when the pins are idle. Could typically be set from a 12 * pm_runtime_suspend() operation. 13 * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into 14 * when the pins are sleeping. Could typically be set from a 15 * common suspend() function. 16 */ 17 #define PINCTRL_STATE_DEFAULT "default" 18 #define PINCTRL_STATE_IDLE "idle" 19 #define PINCTRL_STATE_SLEEP "sleep" 20