1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * Framework and drivers for configuring and reading different PHYs 4 * Based on code in sungem_phy.c and (long-removed) gianfar_phy.c 5 * 6 * Author: Andy Fleming 7 * 8 * Copyright (c) 2004 Freescale Semiconductor, Inc. 9 */ 10 11 #ifndef __PHY_H 12 #define __PHY_H 13 14 #include <linux/compiler.h> 15 #include <linux/spinlock.h> 16 #include <linux/ethtool.h> 17 #include <linux/leds.h> 18 #include <linux/linkmode.h> 19 #include <linux/netlink.h> 20 #include <linux/mdio.h> 21 #include <linux/mii.h> 22 #include <linux/mii_timestamper.h> 23 #include <linux/module.h> 24 #include <linux/timer.h> 25 #include <linux/workqueue.h> 26 #include <linux/mod_devicetable.h> 27 #include <linux/u64_stats_sync.h> 28 #include <linux/irqreturn.h> 29 #include <linux/iopoll.h> 30 #include <linux/refcount.h> 31 32 #include <linux/atomic.h> 33 #include <net/eee.h> 34 35 #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \ 36 SUPPORTED_TP | \ 37 SUPPORTED_MII) 38 39 #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \ 40 SUPPORTED_10baseT_Full) 41 42 #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \ 43 SUPPORTED_100baseT_Full) 44 45 #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \ 46 SUPPORTED_1000baseT_Full) 47 48 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init; 49 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init; 50 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1s_p2mp_features) __ro_after_init; 51 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init; 52 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init; 53 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init; 54 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init; 55 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_fec_features) __ro_after_init; 56 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init; 57 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init; 58 extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap2_features) __ro_after_init; 59 60 #define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features) 61 #define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features) 62 #define PHY_BASIC_T1S_P2MP_FEATURES ((unsigned long *)&phy_basic_t1s_p2mp_features) 63 #define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features) 64 #define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features) 65 #define PHY_GBIT_ALL_PORTS_FEATURES ((unsigned long *)&phy_gbit_all_ports_features) 66 #define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features) 67 #define PHY_10GBIT_FEC_FEATURES ((unsigned long *)&phy_10gbit_fec_features) 68 #define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features) 69 #define PHY_EEE_CAP1_FEATURES ((unsigned long *)&phy_eee_cap1_features) 70 #define PHY_EEE_CAP2_FEATURES ((unsigned long *)&phy_eee_cap2_features) 71 72 extern const int phy_basic_ports_array[3]; 73 extern const int phy_fibre_port_array[1]; 74 extern const int phy_all_ports_features_array[7]; 75 extern const int phy_10_100_features_array[4]; 76 extern const int phy_basic_t1_features_array[3]; 77 extern const int phy_basic_t1s_p2mp_features_array[2]; 78 extern const int phy_gbit_features_array[2]; 79 extern const int phy_10gbit_features_array[1]; 80 81 /* 82 * Set phydev->irq to PHY_POLL if interrupts are not supported, 83 * or not desired for this PHY. Set to PHY_MAC_INTERRUPT if 84 * the attached MAC driver handles the interrupt 85 */ 86 #define PHY_POLL -1 87 #define PHY_MAC_INTERRUPT -2 88 89 #define PHY_IS_INTERNAL 0x00000001 90 #define PHY_RST_AFTER_CLK_EN 0x00000002 91 #define PHY_POLL_CABLE_TEST 0x00000004 92 #define PHY_ALWAYS_CALL_SUSPEND 0x00000008 93 #define MDIO_DEVICE_IS_PHY 0x80000000 94 95 /** 96 * enum phy_interface_t - Interface Mode definitions 97 * 98 * @PHY_INTERFACE_MODE_NA: Not Applicable - don't touch 99 * @PHY_INTERFACE_MODE_INTERNAL: No interface, MAC and PHY combined 100 * @PHY_INTERFACE_MODE_MII: Media-independent interface 101 * @PHY_INTERFACE_MODE_GMII: Gigabit media-independent interface 102 * @PHY_INTERFACE_MODE_SGMII: Serial gigabit media-independent interface 103 * @PHY_INTERFACE_MODE_TBI: Ten Bit Interface 104 * @PHY_INTERFACE_MODE_REVMII: Reverse Media Independent Interface 105 * @PHY_INTERFACE_MODE_RMII: Reduced Media Independent Interface 106 * @PHY_INTERFACE_MODE_REVRMII: Reduced Media Independent Interface in PHY role 107 * @PHY_INTERFACE_MODE_RGMII: Reduced gigabit media-independent interface 108 * @PHY_INTERFACE_MODE_RGMII_ID: RGMII with Internal RX+TX delay 109 * @PHY_INTERFACE_MODE_RGMII_RXID: RGMII with Internal RX delay 110 * @PHY_INTERFACE_MODE_RGMII_TXID: RGMII with Internal RX delay 111 * @PHY_INTERFACE_MODE_RTBI: Reduced TBI 112 * @PHY_INTERFACE_MODE_SMII: Serial MII 113 * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface 114 * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface 115 * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax 116 * @PHY_INTERFACE_MODE_PSGMII: Penta SGMII 117 * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII 118 * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII 119 * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX 120 * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX 121 * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX 122 * @PHY_INTERFACE_MODE_5GBASER: 5G BaseR 123 * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI 124 * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface 125 * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR 126 * @PHY_INTERFACE_MODE_25GBASER: 25G BaseR 127 * @PHY_INTERFACE_MODE_USXGMII: Universal Serial 10GE MII 128 * @PHY_INTERFACE_MODE_10GKR: 10GBASE-KR - with Clause 73 AN 129 * @PHY_INTERFACE_MODE_QUSGMII: Quad Universal SGMII 130 * @PHY_INTERFACE_MODE_1000BASEKX: 1000Base-KX - with Clause 73 AN 131 * @PHY_INTERFACE_MODE_MAX: Book keeping 132 * 133 * Describes the interface between the MAC and PHY. 134 */ 135 typedef enum { 136 PHY_INTERFACE_MODE_NA, 137 PHY_INTERFACE_MODE_INTERNAL, 138 PHY_INTERFACE_MODE_MII, 139 PHY_INTERFACE_MODE_GMII, 140 PHY_INTERFACE_MODE_SGMII, 141 PHY_INTERFACE_MODE_TBI, 142 PHY_INTERFACE_MODE_REVMII, 143 PHY_INTERFACE_MODE_RMII, 144 PHY_INTERFACE_MODE_REVRMII, 145 PHY_INTERFACE_MODE_RGMII, 146 PHY_INTERFACE_MODE_RGMII_ID, 147 PHY_INTERFACE_MODE_RGMII_RXID, 148 PHY_INTERFACE_MODE_RGMII_TXID, 149 PHY_INTERFACE_MODE_RTBI, 150 PHY_INTERFACE_MODE_SMII, 151 PHY_INTERFACE_MODE_XGMII, 152 PHY_INTERFACE_MODE_XLGMII, 153 PHY_INTERFACE_MODE_MOCA, 154 PHY_INTERFACE_MODE_PSGMII, 155 PHY_INTERFACE_MODE_QSGMII, 156 PHY_INTERFACE_MODE_TRGMII, 157 PHY_INTERFACE_MODE_100BASEX, 158 PHY_INTERFACE_MODE_1000BASEX, 159 PHY_INTERFACE_MODE_2500BASEX, 160 PHY_INTERFACE_MODE_5GBASER, 161 PHY_INTERFACE_MODE_RXAUI, 162 PHY_INTERFACE_MODE_XAUI, 163 /* 10GBASE-R, XFI, SFI - single lane 10G Serdes */ 164 PHY_INTERFACE_MODE_10GBASER, 165 PHY_INTERFACE_MODE_25GBASER, 166 PHY_INTERFACE_MODE_USXGMII, 167 /* 10GBASE-KR - with Clause 73 AN */ 168 PHY_INTERFACE_MODE_10GKR, 169 PHY_INTERFACE_MODE_QUSGMII, 170 PHY_INTERFACE_MODE_1000BASEKX, 171 PHY_INTERFACE_MODE_MAX, 172 } phy_interface_t; 173 174 /* PHY interface mode bitmap handling */ 175 #define DECLARE_PHY_INTERFACE_MASK(name) \ 176 DECLARE_BITMAP(name, PHY_INTERFACE_MODE_MAX) 177 178 static inline void phy_interface_zero(unsigned long *intf) 179 { 180 bitmap_zero(intf, PHY_INTERFACE_MODE_MAX); 181 } 182 183 static inline bool phy_interface_empty(const unsigned long *intf) 184 { 185 return bitmap_empty(intf, PHY_INTERFACE_MODE_MAX); 186 } 187 188 static inline void phy_interface_and(unsigned long *dst, const unsigned long *a, 189 const unsigned long *b) 190 { 191 bitmap_and(dst, a, b, PHY_INTERFACE_MODE_MAX); 192 } 193 194 static inline void phy_interface_or(unsigned long *dst, const unsigned long *a, 195 const unsigned long *b) 196 { 197 bitmap_or(dst, a, b, PHY_INTERFACE_MODE_MAX); 198 } 199 200 static inline void phy_interface_set_rgmii(unsigned long *intf) 201 { 202 __set_bit(PHY_INTERFACE_MODE_RGMII, intf); 203 __set_bit(PHY_INTERFACE_MODE_RGMII_ID, intf); 204 __set_bit(PHY_INTERFACE_MODE_RGMII_RXID, intf); 205 __set_bit(PHY_INTERFACE_MODE_RGMII_TXID, intf); 206 } 207 208 /* 209 * phy_supported_speeds - return all speeds currently supported by a PHY device 210 */ 211 unsigned int phy_supported_speeds(struct phy_device *phy, 212 unsigned int *speeds, 213 unsigned int size); 214 215 /** 216 * phy_modes - map phy_interface_t enum to device tree binding of phy-mode 217 * @interface: enum phy_interface_t value 218 * 219 * Description: maps enum &phy_interface_t defined in this file 220 * into the device tree binding of 'phy-mode', so that Ethernet 221 * device driver can get PHY interface from device tree. 222 */ 223 static inline const char *phy_modes(phy_interface_t interface) 224 { 225 switch (interface) { 226 case PHY_INTERFACE_MODE_NA: 227 return ""; 228 case PHY_INTERFACE_MODE_INTERNAL: 229 return "internal"; 230 case PHY_INTERFACE_MODE_MII: 231 return "mii"; 232 case PHY_INTERFACE_MODE_GMII: 233 return "gmii"; 234 case PHY_INTERFACE_MODE_SGMII: 235 return "sgmii"; 236 case PHY_INTERFACE_MODE_TBI: 237 return "tbi"; 238 case PHY_INTERFACE_MODE_REVMII: 239 return "rev-mii"; 240 case PHY_INTERFACE_MODE_RMII: 241 return "rmii"; 242 case PHY_INTERFACE_MODE_REVRMII: 243 return "rev-rmii"; 244 case PHY_INTERFACE_MODE_RGMII: 245 return "rgmii"; 246 case PHY_INTERFACE_MODE_RGMII_ID: 247 return "rgmii-id"; 248 case PHY_INTERFACE_MODE_RGMII_RXID: 249 return "rgmii-rxid"; 250 case PHY_INTERFACE_MODE_RGMII_TXID: 251 return "rgmii-txid"; 252 case PHY_INTERFACE_MODE_RTBI: 253 return "rtbi"; 254 case PHY_INTERFACE_MODE_SMII: 255 return "smii"; 256 case PHY_INTERFACE_MODE_XGMII: 257 return "xgmii"; 258 case PHY_INTERFACE_MODE_XLGMII: 259 return "xlgmii"; 260 case PHY_INTERFACE_MODE_MOCA: 261 return "moca"; 262 case PHY_INTERFACE_MODE_PSGMII: 263 return "psgmii"; 264 case PHY_INTERFACE_MODE_QSGMII: 265 return "qsgmii"; 266 case PHY_INTERFACE_MODE_TRGMII: 267 return "trgmii"; 268 case PHY_INTERFACE_MODE_1000BASEX: 269 return "1000base-x"; 270 case PHY_INTERFACE_MODE_1000BASEKX: 271 return "1000base-kx"; 272 case PHY_INTERFACE_MODE_2500BASEX: 273 return "2500base-x"; 274 case PHY_INTERFACE_MODE_5GBASER: 275 return "5gbase-r"; 276 case PHY_INTERFACE_MODE_RXAUI: 277 return "rxaui"; 278 case PHY_INTERFACE_MODE_XAUI: 279 return "xaui"; 280 case PHY_INTERFACE_MODE_10GBASER: 281 return "10gbase-r"; 282 case PHY_INTERFACE_MODE_25GBASER: 283 return "25gbase-r"; 284 case PHY_INTERFACE_MODE_USXGMII: 285 return "usxgmii"; 286 case PHY_INTERFACE_MODE_10GKR: 287 return "10gbase-kr"; 288 case PHY_INTERFACE_MODE_100BASEX: 289 return "100base-x"; 290 case PHY_INTERFACE_MODE_QUSGMII: 291 return "qusgmii"; 292 default: 293 return "unknown"; 294 } 295 } 296 297 #define PHY_INIT_TIMEOUT 100000 298 #define PHY_FORCE_TIMEOUT 10 299 300 #define PHY_MAX_ADDR 32 301 302 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ 303 #define PHY_ID_FMT "%s:%02x" 304 305 #define MII_BUS_ID_SIZE 61 306 307 struct device; 308 struct kernel_hwtstamp_config; 309 struct phylink; 310 struct sfp_bus; 311 struct sfp_upstream_ops; 312 struct sk_buff; 313 314 /** 315 * struct mdio_bus_stats - Statistics counters for MDIO busses 316 * @transfers: Total number of transfers, i.e. @writes + @reads 317 * @errors: Number of MDIO transfers that returned an error 318 * @writes: Number of write transfers 319 * @reads: Number of read transfers 320 * @syncp: Synchronisation for incrementing statistics 321 */ 322 struct mdio_bus_stats { 323 u64_stats_t transfers; 324 u64_stats_t errors; 325 u64_stats_t writes; 326 u64_stats_t reads; 327 /* Must be last, add new statistics above */ 328 struct u64_stats_sync syncp; 329 }; 330 331 /** 332 * struct phy_package_shared - Shared information in PHY packages 333 * @base_addr: Base PHY address of PHY package used to combine PHYs 334 * in one package and for offset calculation of phy_package_read/write 335 * @np: Pointer to the Device Node if PHY package defined in DT 336 * @refcnt: Number of PHYs connected to this shared data 337 * @flags: Initialization of PHY package 338 * @priv_size: Size of the shared private data @priv 339 * @priv: Driver private data shared across a PHY package 340 * 341 * Represents a shared structure between different phydev's in the same 342 * package, for example a quad PHY. See phy_package_join() and 343 * phy_package_leave(). 344 */ 345 struct phy_package_shared { 346 u8 base_addr; 347 /* With PHY package defined in DT this points to the PHY package node */ 348 struct device_node *np; 349 refcount_t refcnt; 350 unsigned long flags; 351 size_t priv_size; 352 353 /* private data pointer */ 354 /* note that this pointer is shared between different phydevs and 355 * the user has to take care of appropriate locking. It is allocated 356 * and freed automatically by phy_package_join() and 357 * phy_package_leave(). 358 */ 359 void *priv; 360 }; 361 362 /* used as bit number in atomic bitops */ 363 #define PHY_SHARED_F_INIT_DONE 0 364 #define PHY_SHARED_F_PROBE_DONE 1 365 366 /** 367 * struct mii_bus - Represents an MDIO bus 368 * 369 * @owner: Who owns this device 370 * @name: User friendly name for this MDIO device, or driver name 371 * @id: Unique identifier for this bus, typical from bus hierarchy 372 * @priv: Driver private data 373 * 374 * The Bus class for PHYs. Devices which provide access to 375 * PHYs should register using this structure 376 */ 377 struct mii_bus { 378 struct module *owner; 379 const char *name; 380 char id[MII_BUS_ID_SIZE]; 381 void *priv; 382 /** @read: Perform a read transfer on the bus */ 383 int (*read)(struct mii_bus *bus, int addr, int regnum); 384 /** @write: Perform a write transfer on the bus */ 385 int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); 386 /** @read_c45: Perform a C45 read transfer on the bus */ 387 int (*read_c45)(struct mii_bus *bus, int addr, int devnum, int regnum); 388 /** @write_c45: Perform a C45 write transfer on the bus */ 389 int (*write_c45)(struct mii_bus *bus, int addr, int devnum, 390 int regnum, u16 val); 391 /** @reset: Perform a reset of the bus */ 392 int (*reset)(struct mii_bus *bus); 393 394 /** @stats: Statistic counters per device on the bus */ 395 struct mdio_bus_stats stats[PHY_MAX_ADDR]; 396 397 /** 398 * @mdio_lock: A lock to ensure that only one thing can read/write 399 * the MDIO bus at a time 400 */ 401 struct mutex mdio_lock; 402 403 /** @parent: Parent device of this bus */ 404 struct device *parent; 405 /** @state: State of bus structure */ 406 enum { 407 MDIOBUS_ALLOCATED = 1, 408 MDIOBUS_REGISTERED, 409 MDIOBUS_UNREGISTERED, 410 MDIOBUS_RELEASED, 411 } state; 412 413 /** @dev: Kernel device representation */ 414 struct device dev; 415 416 /** @mdio_map: list of all MDIO devices on bus */ 417 struct mdio_device *mdio_map[PHY_MAX_ADDR]; 418 419 /** @phy_mask: PHY addresses to be ignored when probing */ 420 u32 phy_mask; 421 422 /** @phy_ignore_ta_mask: PHY addresses to ignore the TA/read failure */ 423 u32 phy_ignore_ta_mask; 424 425 /** 426 * @irq: An array of interrupts, each PHY's interrupt at the index 427 * matching its address 428 */ 429 int irq[PHY_MAX_ADDR]; 430 431 /** @reset_delay_us: GPIO reset pulse width in microseconds */ 432 int reset_delay_us; 433 /** @reset_post_delay_us: GPIO reset deassert delay in microseconds */ 434 int reset_post_delay_us; 435 /** @reset_gpiod: Reset GPIO descriptor pointer */ 436 struct gpio_desc *reset_gpiod; 437 438 /** @shared_lock: protect access to the shared element */ 439 struct mutex shared_lock; 440 441 /** @shared: shared state across different PHYs */ 442 struct phy_package_shared *shared[PHY_MAX_ADDR]; 443 }; 444 #define to_mii_bus(d) container_of(d, struct mii_bus, dev) 445 446 struct mii_bus *mdiobus_alloc_size(size_t size); 447 448 /** 449 * mdiobus_alloc - Allocate an MDIO bus structure 450 * 451 * The internal state of the MDIO bus will be set of MDIOBUS_ALLOCATED ready 452 * for the driver to register the bus. 453 */ 454 static inline struct mii_bus *mdiobus_alloc(void) 455 { 456 return mdiobus_alloc_size(0); 457 } 458 459 int __mdiobus_register(struct mii_bus *bus, struct module *owner); 460 int __devm_mdiobus_register(struct device *dev, struct mii_bus *bus, 461 struct module *owner); 462 #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE) 463 #define devm_mdiobus_register(dev, bus) \ 464 __devm_mdiobus_register(dev, bus, THIS_MODULE) 465 466 void mdiobus_unregister(struct mii_bus *bus); 467 void mdiobus_free(struct mii_bus *bus); 468 struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv); 469 static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) 470 { 471 return devm_mdiobus_alloc_size(dev, 0); 472 } 473 474 struct mii_bus *mdio_find_bus(const char *mdio_name); 475 struct phy_device *mdiobus_scan_c22(struct mii_bus *bus, int addr); 476 477 #define PHY_INTERRUPT_DISABLED false 478 #define PHY_INTERRUPT_ENABLED true 479 480 /** 481 * enum phy_state - PHY state machine states: 482 * 483 * @PHY_DOWN: PHY device and driver are not ready for anything. probe 484 * should be called if and only if the PHY is in this state, 485 * given that the PHY device exists. 486 * - PHY driver probe function will set the state to @PHY_READY 487 * 488 * @PHY_READY: PHY is ready to send and receive packets, but the 489 * controller is not. By default, PHYs which do not implement 490 * probe will be set to this state by phy_probe(). 491 * - start will set the state to UP 492 * 493 * @PHY_UP: The PHY and attached device are ready to do work. 494 * Interrupts should be started here. 495 * - timer moves to @PHY_NOLINK or @PHY_RUNNING 496 * 497 * @PHY_NOLINK: PHY is up, but not currently plugged in. 498 * - irq or timer will set @PHY_RUNNING if link comes back 499 * - phy_stop moves to @PHY_HALTED 500 * 501 * @PHY_RUNNING: PHY is currently up, running, and possibly sending 502 * and/or receiving packets 503 * - irq or timer will set @PHY_NOLINK if link goes down 504 * - phy_stop moves to @PHY_HALTED 505 * 506 * @PHY_CABLETEST: PHY is performing a cable test. Packet reception/sending 507 * is not expected to work, carrier will be indicated as down. PHY will be 508 * poll once per second, or on interrupt for it current state. 509 * Once complete, move to UP to restart the PHY. 510 * - phy_stop aborts the running test and moves to @PHY_HALTED 511 * 512 * @PHY_HALTED: PHY is up, but no polling or interrupts are done. 513 * - phy_start moves to @PHY_UP 514 * 515 * @PHY_ERROR: PHY is up, but is in an error state. 516 * - phy_stop moves to @PHY_HALTED 517 */ 518 enum phy_state { 519 PHY_DOWN = 0, 520 PHY_READY, 521 PHY_HALTED, 522 PHY_ERROR, 523 PHY_UP, 524 PHY_RUNNING, 525 PHY_NOLINK, 526 PHY_CABLETEST, 527 }; 528 529 #define MDIO_MMD_NUM 32 530 531 /** 532 * struct phy_c45_device_ids - 802.3-c45 Device Identifiers 533 * @devices_in_package: IEEE 802.3 devices in package register value. 534 * @mmds_present: bit vector of MMDs present. 535 * @device_ids: The device identifer for each present device. 536 */ 537 struct phy_c45_device_ids { 538 u32 devices_in_package; 539 u32 mmds_present; 540 u32 device_ids[MDIO_MMD_NUM]; 541 }; 542 543 struct macsec_context; 544 struct macsec_ops; 545 546 /** 547 * struct phy_device - An instance of a PHY 548 * 549 * @mdio: MDIO bus this PHY is on 550 * @drv: Pointer to the driver for this PHY instance 551 * @devlink: Create a link between phy dev and mac dev, if the external phy 552 * used by current mac interface is managed by another mac interface. 553 * @phy_id: UID for this device found during discovery 554 * @c45_ids: 802.3-c45 Device Identifiers if is_c45. 555 * @is_c45: Set to true if this PHY uses clause 45 addressing. 556 * @is_internal: Set to true if this PHY is internal to a MAC. 557 * @is_pseudo_fixed_link: Set to true if this PHY is an Ethernet switch, etc. 558 * @is_gigabit_capable: Set to true if PHY supports 1000Mbps 559 * @has_fixups: Set to true if this PHY has fixups/quirks. 560 * @suspended: Set to true if this PHY has been suspended successfully. 561 * @suspended_by_mdio_bus: Set to true if this PHY was suspended by MDIO bus. 562 * @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. 563 * @loopback_enabled: Set true if this PHY has been loopbacked successfully. 564 * @downshifted_rate: Set true if link speed has been downshifted. 565 * @is_on_sfp_module: Set true if PHY is located on an SFP module. 566 * @mac_managed_pm: Set true if MAC driver takes of suspending/resuming PHY 567 * @wol_enabled: Set to true if the PHY or the attached MAC have Wake-on-LAN 568 * enabled. 569 * @state: State of the PHY for management purposes 570 * @dev_flags: Device-specific flags used by the PHY driver. 571 * 572 * - Bits [15:0] are free to use by the PHY driver to communicate 573 * driver specific behavior. 574 * - Bits [23:16] are currently reserved for future use. 575 * - Bits [31:24] are reserved for defining generic 576 * PHY driver behavior. 577 * @irq: IRQ number of the PHY's interrupt (-1 if none) 578 * @phylink: Pointer to phylink instance for this PHY 579 * @sfp_bus_attached: Flag indicating whether the SFP bus has been attached 580 * @sfp_bus: SFP bus attached to this PHY's fiber port 581 * @attached_dev: The attached enet driver's device instance ptr 582 * @adjust_link: Callback for the enet controller to respond to changes: in the 583 * link state. 584 * @phy_link_change: Callback for phylink for notification of link change 585 * @macsec_ops: MACsec offloading ops. 586 * 587 * @speed: Current link speed 588 * @duplex: Current duplex 589 * @port: Current port 590 * @pause: Current pause 591 * @asym_pause: Current asymmetric pause 592 * @supported: Combined MAC/PHY supported linkmodes 593 * @advertising: Currently advertised linkmodes 594 * @adv_old: Saved advertised while power saving for WoL 595 * @supported_eee: supported PHY EEE linkmodes 596 * @advertising_eee: Currently advertised EEE linkmodes 597 * @eee_enabled: Flag indicating whether the EEE feature is enabled 598 * @enable_tx_lpi: When True, MAC should transmit LPI to PHY 599 * @eee_cfg: User configuration of EEE 600 * @lp_advertising: Current link partner advertised linkmodes 601 * @host_interfaces: PHY interface modes supported by host 602 * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited 603 * @autoneg: Flag autoneg being used 604 * @rate_matching: Current rate matching mode 605 * @link: Current link state 606 * @autoneg_complete: Flag auto negotiation of the link has completed 607 * @mdix: Current crossover 608 * @mdix_ctrl: User setting of crossover 609 * @pma_extable: Cached value of PMA/PMD Extended Abilities Register 610 * @interrupts: Flag interrupts have been enabled 611 * @irq_suspended: Flag indicating PHY is suspended and therefore interrupt 612 * handling shall be postponed until PHY has resumed 613 * @irq_rerun: Flag indicating interrupts occurred while PHY was suspended, 614 * requiring a rerun of the interrupt handler after resume 615 * @interface: enum phy_interface_t value 616 * @possible_interfaces: bitmap if interface modes that the attached PHY 617 * will switch between depending on media speed. 618 * @skb: Netlink message for cable diagnostics 619 * @nest: Netlink nest used for cable diagnostics 620 * @ehdr: nNtlink header for cable diagnostics 621 * @phy_led_triggers: Array of LED triggers 622 * @phy_num_led_triggers: Number of triggers in @phy_led_triggers 623 * @led_link_trigger: LED trigger for link up/down 624 * @last_triggered: last LED trigger for link speed 625 * @leds: list of PHY LED structures 626 * @master_slave_set: User requested master/slave configuration 627 * @master_slave_get: Current master/slave advertisement 628 * @master_slave_state: Current master/slave configuration 629 * @mii_ts: Pointer to time stamper callbacks 630 * @psec: Pointer to Power Sourcing Equipment control struct 631 * @lock: Mutex for serialization access to PHY 632 * @state_queue: Work queue for state machine 633 * @link_down_events: Number of times link was lost 634 * @shared: Pointer to private data shared by phys in one package 635 * @priv: Pointer to driver private data 636 * 637 * interrupts currently only supports enabled or disabled, 638 * but could be changed in the future to support enabling 639 * and disabling specific interrupts 640 * 641 * Contains some infrastructure for polling and interrupt 642 * handling, as well as handling shifts in PHY hardware state 643 */ 644 struct phy_device { 645 struct mdio_device mdio; 646 647 /* Information about the PHY type */ 648 /* And management functions */ 649 const struct phy_driver *drv; 650 651 struct device_link *devlink; 652 653 u32 phy_id; 654 655 struct phy_c45_device_ids c45_ids; 656 unsigned is_c45:1; 657 unsigned is_internal:1; 658 unsigned is_pseudo_fixed_link:1; 659 unsigned is_gigabit_capable:1; 660 unsigned has_fixups:1; 661 unsigned suspended:1; 662 unsigned suspended_by_mdio_bus:1; 663 unsigned sysfs_links:1; 664 unsigned loopback_enabled:1; 665 unsigned downshifted_rate:1; 666 unsigned is_on_sfp_module:1; 667 unsigned mac_managed_pm:1; 668 unsigned wol_enabled:1; 669 670 unsigned autoneg:1; 671 /* The most recently read link state */ 672 unsigned link:1; 673 unsigned autoneg_complete:1; 674 675 /* Interrupts are enabled */ 676 unsigned interrupts:1; 677 unsigned irq_suspended:1; 678 unsigned irq_rerun:1; 679 680 int rate_matching; 681 682 enum phy_state state; 683 684 u32 dev_flags; 685 686 phy_interface_t interface; 687 DECLARE_PHY_INTERFACE_MASK(possible_interfaces); 688 689 /* 690 * forced speed & duplex (no autoneg) 691 * partner speed & duplex & pause (autoneg) 692 */ 693 int speed; 694 int duplex; 695 int port; 696 int pause; 697 int asym_pause; 698 u8 master_slave_get; 699 u8 master_slave_set; 700 u8 master_slave_state; 701 702 /* Union of PHY and Attached devices' supported link modes */ 703 /* See ethtool.h for more info */ 704 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); 705 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); 706 __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); 707 /* used with phy_speed_down */ 708 __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old); 709 /* used for eee validation and configuration*/ 710 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported_eee); 711 __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising_eee); 712 bool eee_enabled; 713 714 /* Host supported PHY interface types. Should be ignored if empty. */ 715 DECLARE_PHY_INTERFACE_MASK(host_interfaces); 716 717 /* Energy efficient ethernet modes which should be prohibited */ 718 u32 eee_broken_modes; 719 bool enable_tx_lpi; 720 struct eee_config eee_cfg; 721 722 #ifdef CONFIG_LED_TRIGGER_PHY 723 struct phy_led_trigger *phy_led_triggers; 724 unsigned int phy_num_led_triggers; 725 struct phy_led_trigger *last_triggered; 726 727 struct phy_led_trigger *led_link_trigger; 728 #endif 729 struct list_head leds; 730 731 /* 732 * Interrupt number for this PHY 733 * -1 means no interrupt 734 */ 735 int irq; 736 737 /* private data pointer */ 738 /* For use by PHYs to maintain extra state */ 739 void *priv; 740 741 /* shared data pointer */ 742 /* For use by PHYs inside the same package that need a shared state. */ 743 struct phy_package_shared *shared; 744 745 /* Reporting cable test results */ 746 struct sk_buff *skb; 747 void *ehdr; 748 struct nlattr *nest; 749 750 /* Interrupt and Polling infrastructure */ 751 struct delayed_work state_queue; 752 753 struct mutex lock; 754 755 /* This may be modified under the rtnl lock */ 756 bool sfp_bus_attached; 757 struct sfp_bus *sfp_bus; 758 struct phylink *phylink; 759 struct net_device *attached_dev; 760 struct mii_timestamper *mii_ts; 761 struct pse_control *psec; 762 763 u8 mdix; 764 u8 mdix_ctrl; 765 766 int pma_extable; 767 768 unsigned int link_down_events; 769 770 void (*phy_link_change)(struct phy_device *phydev, bool up); 771 void (*adjust_link)(struct net_device *dev); 772 773 #if IS_ENABLED(CONFIG_MACSEC) 774 /* MACsec management functions */ 775 const struct macsec_ops *macsec_ops; 776 #endif 777 }; 778 779 /* Generic phy_device::dev_flags */ 780 #define PHY_F_NO_IRQ 0x80000000 781 782 static inline struct phy_device *to_phy_device(const struct device *dev) 783 { 784 return container_of(to_mdio_device(dev), struct phy_device, mdio); 785 } 786 787 /** 788 * struct phy_tdr_config - Configuration of a TDR raw test 789 * 790 * @first: Distance for first data collection point 791 * @last: Distance for last data collection point 792 * @step: Step between data collection points 793 * @pair: Bitmap of cable pairs to collect data for 794 * 795 * A structure containing possible configuration parameters 796 * for a TDR cable test. The driver does not need to implement 797 * all the parameters, but should report what is actually used. 798 * All distances are in centimeters. 799 */ 800 struct phy_tdr_config { 801 u32 first; 802 u32 last; 803 u32 step; 804 s8 pair; 805 }; 806 #define PHY_PAIR_ALL -1 807 808 /** 809 * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision 810 * Avoidance) Reconciliation Sublayer. 811 * 812 * @version: read-only PLCA register map version. -1 = not available. Ignored 813 * when setting the configuration. Format is the same as reported by the PLCA 814 * IDVER register (31.CA00). -1 = not available. 815 * @enabled: PLCA configured mode (enabled/disabled). -1 = not available / don't 816 * set. 0 = disabled, anything else = enabled. 817 * @node_id: the PLCA local node identifier. -1 = not available / don't set. 818 * Allowed values [0 .. 254]. 255 = node disabled. 819 * @node_cnt: the PLCA node count (maximum number of nodes having a TO). Only 820 * meaningful for the coordinator (node_id = 0). -1 = not available / don't 821 * set. Allowed values [1 .. 255]. 822 * @to_tmr: The value of the PLCA to_timer in bit-times, which determines the 823 * PLCA transmit opportunity window opening. See IEEE802.3 Clause 148 for 824 * more details. The to_timer shall be set equal over all nodes. 825 * -1 = not available / don't set. Allowed values [0 .. 255]. 826 * @burst_cnt: controls how many additional frames a node is allowed to send in 827 * single transmit opportunity (TO). The default value of 0 means that the 828 * node is allowed exactly one frame per TO. A value of 1 allows two frames 829 * per TO, and so on. -1 = not available / don't set. 830 * Allowed values [0 .. 255]. 831 * @burst_tmr: controls how many bit times to wait for the MAC to send a new 832 * frame before interrupting the burst. This value should be set to a value 833 * greater than the MAC inter-packet gap (which is typically 96 bits). 834 * -1 = not available / don't set. Allowed values [0 .. 255]. 835 * 836 * A structure containing configuration parameters for setting/getting the PLCA 837 * RS configuration. The driver does not need to implement all the parameters, 838 * but should report what is actually used. 839 */ 840 struct phy_plca_cfg { 841 int version; 842 int enabled; 843 int node_id; 844 int node_cnt; 845 int to_tmr; 846 int burst_cnt; 847 int burst_tmr; 848 }; 849 850 /** 851 * struct phy_plca_status - Status of the PLCA (Physical Layer Collision 852 * Avoidance) Reconciliation Sublayer. 853 * 854 * @pst: The PLCA status as reported by the PST bit in the PLCA STATUS 855 * register(31.CA03), indicating BEACON activity. 856 * 857 * A structure containing status information of the PLCA RS configuration. 858 * The driver does not need to implement all the parameters, but should report 859 * what is actually used. 860 */ 861 struct phy_plca_status { 862 bool pst; 863 }; 864 865 /* Modes for PHY LED configuration */ 866 enum phy_led_modes { 867 PHY_LED_ACTIVE_LOW = 0, 868 PHY_LED_INACTIVE_HIGH_IMPEDANCE = 1, 869 870 /* keep it last */ 871 __PHY_LED_MODES_NUM, 872 }; 873 874 /** 875 * struct phy_led: An LED driven by the PHY 876 * 877 * @list: List of LEDs 878 * @phydev: PHY this LED is attached to 879 * @led_cdev: Standard LED class structure 880 * @index: Number of the LED 881 */ 882 struct phy_led { 883 struct list_head list; 884 struct phy_device *phydev; 885 struct led_classdev led_cdev; 886 u8 index; 887 }; 888 889 #define to_phy_led(d) container_of(d, struct phy_led, led_cdev) 890 891 /** 892 * struct phy_driver - Driver structure for a particular PHY type 893 * 894 * @mdiodrv: Data common to all MDIO devices 895 * @phy_id: The result of reading the UID registers of this PHY 896 * type, and ANDing them with the phy_id_mask. This driver 897 * only works for PHYs with IDs which match this field 898 * @name: The friendly name of this PHY type 899 * @phy_id_mask: Defines the important bits of the phy_id 900 * @features: A mandatory list of features (speed, duplex, etc) 901 * supported by this PHY 902 * @flags: A bitfield defining certain other features this PHY 903 * supports (like interrupts) 904 * @driver_data: Static driver data 905 * 906 * All functions are optional. If config_aneg or read_status 907 * are not implemented, the phy core uses the genphy versions. 908 * Note that none of these functions should be called from 909 * interrupt time. The goal is for the bus read/write functions 910 * to be able to block when the bus transaction is happening, 911 * and be freed up by an interrupt (The MPC85xx has this ability, 912 * though it is not currently supported in the driver). 913 */ 914 struct phy_driver { 915 struct mdio_driver_common mdiodrv; 916 u32 phy_id; 917 char *name; 918 u32 phy_id_mask; 919 const unsigned long * const features; 920 u32 flags; 921 const void *driver_data; 922 923 /** 924 * @soft_reset: Called to issue a PHY software reset 925 */ 926 int (*soft_reset)(struct phy_device *phydev); 927 928 /** 929 * @config_init: Called to initialize the PHY, 930 * including after a reset 931 */ 932 int (*config_init)(struct phy_device *phydev); 933 934 /** 935 * @probe: Called during discovery. Used to set 936 * up device-specific structures, if any 937 */ 938 int (*probe)(struct phy_device *phydev); 939 940 /** 941 * @get_features: Probe the hardware to determine what 942 * abilities it has. Should only set phydev->supported. 943 */ 944 int (*get_features)(struct phy_device *phydev); 945 946 /** 947 * @get_rate_matching: Get the supported type of rate matching for a 948 * particular phy interface. This is used by phy consumers to determine 949 * whether to advertise lower-speed modes for that interface. It is 950 * assumed that if a rate matching mode is supported on an interface, 951 * then that interface's rate can be adapted to all slower link speeds 952 * supported by the phy. If the interface is not supported, this should 953 * return %RATE_MATCH_NONE. 954 */ 955 int (*get_rate_matching)(struct phy_device *phydev, 956 phy_interface_t iface); 957 958 /* PHY Power Management */ 959 /** @suspend: Suspend the hardware, saving state if needed */ 960 int (*suspend)(struct phy_device *phydev); 961 /** @resume: Resume the hardware, restoring state if needed */ 962 int (*resume)(struct phy_device *phydev); 963 964 /** 965 * @config_aneg: Configures the advertisement and resets 966 * autonegotiation if phydev->autoneg is on, 967 * forces the speed to the current settings in phydev 968 * if phydev->autoneg is off 969 */ 970 int (*config_aneg)(struct phy_device *phydev); 971 972 /** @aneg_done: Determines the auto negotiation result */ 973 int (*aneg_done)(struct phy_device *phydev); 974 975 /** @read_status: Determines the negotiated speed and duplex */ 976 int (*read_status)(struct phy_device *phydev); 977 978 /** 979 * @config_intr: Enables or disables interrupts. 980 * It should also clear any pending interrupts prior to enabling the 981 * IRQs and after disabling them. 982 */ 983 int (*config_intr)(struct phy_device *phydev); 984 985 /** @handle_interrupt: Override default interrupt handling */ 986 irqreturn_t (*handle_interrupt)(struct phy_device *phydev); 987 988 /** @remove: Clears up any memory if needed */ 989 void (*remove)(struct phy_device *phydev); 990 991 /** 992 * @match_phy_device: Returns true if this is a suitable 993 * driver for the given phydev. If NULL, matching is based on 994 * phy_id and phy_id_mask. 995 */ 996 int (*match_phy_device)(struct phy_device *phydev); 997 998 /** 999 * @set_wol: Some devices (e.g. qnap TS-119P II) require PHY 1000 * register changes to enable Wake on LAN, so set_wol is 1001 * provided to be called in the ethernet driver's set_wol 1002 * function. 1003 */ 1004 int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); 1005 1006 /** 1007 * @get_wol: See set_wol, but for checking whether Wake on LAN 1008 * is enabled. 1009 */ 1010 void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol); 1011 1012 /** 1013 * @link_change_notify: Called to inform a PHY device driver 1014 * when the core is about to change the link state. This 1015 * callback is supposed to be used as fixup hook for drivers 1016 * that need to take action when the link state 1017 * changes. Drivers are by no means allowed to mess with the 1018 * PHY device structure in their implementations. 1019 */ 1020 void (*link_change_notify)(struct phy_device *dev); 1021 1022 /** 1023 * @read_mmd: PHY specific driver override for reading a MMD 1024 * register. This function is optional for PHY specific 1025 * drivers. When not provided, the default MMD read function 1026 * will be used by phy_read_mmd(), which will use either a 1027 * direct read for Clause 45 PHYs or an indirect read for 1028 * Clause 22 PHYs. devnum is the MMD device number within the 1029 * PHY device, regnum is the register within the selected MMD 1030 * device. 1031 */ 1032 int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum); 1033 1034 /** 1035 * @write_mmd: PHY specific driver override for writing a MMD 1036 * register. This function is optional for PHY specific 1037 * drivers. When not provided, the default MMD write function 1038 * will be used by phy_write_mmd(), which will use either a 1039 * direct write for Clause 45 PHYs, or an indirect write for 1040 * Clause 22 PHYs. devnum is the MMD device number within the 1041 * PHY device, regnum is the register within the selected MMD 1042 * device. val is the value to be written. 1043 */ 1044 int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum, 1045 u16 val); 1046 1047 /** @read_page: Return the current PHY register page number */ 1048 int (*read_page)(struct phy_device *dev); 1049 /** @write_page: Set the current PHY register page number */ 1050 int (*write_page)(struct phy_device *dev, int page); 1051 1052 /** 1053 * @module_info: Get the size and type of the eeprom contained 1054 * within a plug-in module 1055 */ 1056 int (*module_info)(struct phy_device *dev, 1057 struct ethtool_modinfo *modinfo); 1058 1059 /** 1060 * @module_eeprom: Get the eeprom information from the plug-in 1061 * module 1062 */ 1063 int (*module_eeprom)(struct phy_device *dev, 1064 struct ethtool_eeprom *ee, u8 *data); 1065 1066 /** @cable_test_start: Start a cable test */ 1067 int (*cable_test_start)(struct phy_device *dev); 1068 1069 /** @cable_test_tdr_start: Start a raw TDR cable test */ 1070 int (*cable_test_tdr_start)(struct phy_device *dev, 1071 const struct phy_tdr_config *config); 1072 1073 /** 1074 * @cable_test_get_status: Once per second, or on interrupt, 1075 * request the status of the test. 1076 */ 1077 int (*cable_test_get_status)(struct phy_device *dev, bool *finished); 1078 1079 /* Get statistics from the PHY using ethtool */ 1080 /** @get_sset_count: Number of statistic counters */ 1081 int (*get_sset_count)(struct phy_device *dev); 1082 /** @get_strings: Names of the statistic counters */ 1083 void (*get_strings)(struct phy_device *dev, u8 *data); 1084 /** @get_stats: Return the statistic counter values */ 1085 void (*get_stats)(struct phy_device *dev, 1086 struct ethtool_stats *stats, u64 *data); 1087 1088 /* Get and Set PHY tunables */ 1089 /** @get_tunable: Return the value of a tunable */ 1090 int (*get_tunable)(struct phy_device *dev, 1091 struct ethtool_tunable *tuna, void *data); 1092 /** @set_tunable: Set the value of a tunable */ 1093 int (*set_tunable)(struct phy_device *dev, 1094 struct ethtool_tunable *tuna, 1095 const void *data); 1096 /** @set_loopback: Set the loopback mood of the PHY */ 1097 int (*set_loopback)(struct phy_device *dev, bool enable); 1098 /** @get_sqi: Get the signal quality indication */ 1099 int (*get_sqi)(struct phy_device *dev); 1100 /** @get_sqi_max: Get the maximum signal quality indication */ 1101 int (*get_sqi_max)(struct phy_device *dev); 1102 1103 /* PLCA RS interface */ 1104 /** @get_plca_cfg: Return the current PLCA configuration */ 1105 int (*get_plca_cfg)(struct phy_device *dev, 1106 struct phy_plca_cfg *plca_cfg); 1107 /** @set_plca_cfg: Set the PLCA configuration */ 1108 int (*set_plca_cfg)(struct phy_device *dev, 1109 const struct phy_plca_cfg *plca_cfg); 1110 /** @get_plca_status: Return the current PLCA status info */ 1111 int (*get_plca_status)(struct phy_device *dev, 1112 struct phy_plca_status *plca_st); 1113 1114 /** 1115 * @led_brightness_set: Set a PHY LED brightness. Index 1116 * indicates which of the PHYs led should be set. Value 1117 * follows the standard LED class meaning, e.g. LED_OFF, 1118 * LED_HALF, LED_FULL. 1119 */ 1120 int (*led_brightness_set)(struct phy_device *dev, 1121 u8 index, enum led_brightness value); 1122 1123 /** 1124 * @led_blink_set: Set a PHY LED brightness. Index indicates 1125 * which of the PHYs led should be configured to blink. Delays 1126 * are in milliseconds and if both are zero then a sensible 1127 * default should be chosen. The call should adjust the 1128 * timings in that case and if it can't match the values 1129 * specified exactly. 1130 */ 1131 int (*led_blink_set)(struct phy_device *dev, u8 index, 1132 unsigned long *delay_on, 1133 unsigned long *delay_off); 1134 /** 1135 * @led_hw_is_supported: Can the HW support the given rules. 1136 * @dev: PHY device which has the LED 1137 * @index: Which LED of the PHY device 1138 * @rules The core is interested in these rules 1139 * 1140 * Return 0 if yes, -EOPNOTSUPP if not, or an error code. 1141 */ 1142 int (*led_hw_is_supported)(struct phy_device *dev, u8 index, 1143 unsigned long rules); 1144 /** 1145 * @led_hw_control_set: Set the HW to control the LED 1146 * @dev: PHY device which has the LED 1147 * @index: Which LED of the PHY device 1148 * @rules The rules used to control the LED 1149 * 1150 * Returns 0, or a an error code. 1151 */ 1152 int (*led_hw_control_set)(struct phy_device *dev, u8 index, 1153 unsigned long rules); 1154 /** 1155 * @led_hw_control_get: Get how the HW is controlling the LED 1156 * @dev: PHY device which has the LED 1157 * @index: Which LED of the PHY device 1158 * @rules Pointer to the rules used to control the LED 1159 * 1160 * Set *@rules to how the HW is currently blinking. Returns 0 1161 * on success, or a error code if the current blinking cannot 1162 * be represented in rules, or some other error happens. 1163 */ 1164 int (*led_hw_control_get)(struct phy_device *dev, u8 index, 1165 unsigned long *rules); 1166 1167 /** 1168 * @led_polarity_set: Set the LED polarity modes 1169 * @dev: PHY device which has the LED 1170 * @index: Which LED of the PHY device 1171 * @modes: bitmap of LED polarity modes 1172 * 1173 * Configure LED with all the required polarity modes in @modes 1174 * to make it correctly turn ON or OFF. 1175 * 1176 * Returns 0, or an error code. 1177 */ 1178 int (*led_polarity_set)(struct phy_device *dev, int index, 1179 unsigned long modes); 1180 }; 1181 #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ 1182 struct phy_driver, mdiodrv) 1183 1184 #define PHY_ANY_ID "MATCH ANY PHY" 1185 #define PHY_ANY_UID 0xffffffff 1186 1187 #define PHY_ID_MATCH_EXACT(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 0) 1188 #define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4) 1189 #define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10) 1190 1191 /** 1192 * phy_id_compare - compare @id1 with @id2 taking account of @mask 1193 * @id1: first PHY ID 1194 * @id2: second PHY ID 1195 * @mask: the PHY ID mask, set bits are significant in matching 1196 * 1197 * Return true if the bits from @id1 and @id2 specified by @mask match. 1198 * This uses an equivalent test to (@id & @mask) == (@phy_id & @mask). 1199 */ 1200 static inline bool phy_id_compare(u32 id1, u32 id2, u32 mask) 1201 { 1202 return !((id1 ^ id2) & mask); 1203 } 1204 1205 /** 1206 * phydev_id_compare - compare @id with the PHY's Clause 22 ID 1207 * @phydev: the PHY device 1208 * @id: the PHY ID to be matched 1209 * 1210 * Compare the @phydev clause 22 ID with the provided @id and return true or 1211 * false depending whether it matches, using the bound driver mask. The 1212 * @phydev must be bound to a driver. 1213 */ 1214 static inline bool phydev_id_compare(struct phy_device *phydev, u32 id) 1215 { 1216 return phy_id_compare(id, phydev->phy_id, phydev->drv->phy_id_mask); 1217 } 1218 1219 /* A Structure for boards to register fixups with the PHY Lib */ 1220 struct phy_fixup { 1221 struct list_head list; 1222 char bus_id[MII_BUS_ID_SIZE + 3]; 1223 u32 phy_uid; 1224 u32 phy_uid_mask; 1225 int (*run)(struct phy_device *phydev); 1226 }; 1227 1228 const char *phy_speed_to_str(int speed); 1229 const char *phy_duplex_to_str(unsigned int duplex); 1230 const char *phy_rate_matching_to_str(int rate_matching); 1231 1232 int phy_interface_num_ports(phy_interface_t interface); 1233 1234 /* A structure for mapping a particular speed and duplex 1235 * combination to a particular SUPPORTED and ADVERTISED value 1236 */ 1237 struct phy_setting { 1238 u32 speed; 1239 u8 duplex; 1240 u8 bit; 1241 }; 1242 1243 const struct phy_setting * 1244 phy_lookup_setting(int speed, int duplex, const unsigned long *mask, 1245 bool exact); 1246 size_t phy_speeds(unsigned int *speeds, size_t size, 1247 unsigned long *mask); 1248 void of_set_phy_supported(struct phy_device *phydev); 1249 void of_set_phy_eee_broken(struct phy_device *phydev); 1250 int phy_speed_down_core(struct phy_device *phydev); 1251 1252 /** 1253 * phy_is_started - Convenience function to check whether PHY is started 1254 * @phydev: The phy_device struct 1255 */ 1256 static inline bool phy_is_started(struct phy_device *phydev) 1257 { 1258 return phydev->state >= PHY_UP; 1259 } 1260 1261 void phy_resolve_aneg_pause(struct phy_device *phydev); 1262 void phy_resolve_aneg_linkmode(struct phy_device *phydev); 1263 void phy_check_downshift(struct phy_device *phydev); 1264 1265 /** 1266 * phy_read - Convenience function for reading a given PHY register 1267 * @phydev: the phy_device struct 1268 * @regnum: register number to read 1269 * 1270 * NOTE: MUST NOT be called from interrupt context, 1271 * because the bus read/write functions may wait for an interrupt 1272 * to conclude the operation. 1273 */ 1274 static inline int phy_read(struct phy_device *phydev, u32 regnum) 1275 { 1276 return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); 1277 } 1278 1279 #define phy_read_poll_timeout(phydev, regnum, val, cond, sleep_us, \ 1280 timeout_us, sleep_before_read) \ 1281 ({ \ 1282 int __ret, __val; \ 1283 __ret = read_poll_timeout(__val = phy_read, val, \ 1284 __val < 0 || (cond), \ 1285 sleep_us, timeout_us, sleep_before_read, phydev, regnum); \ 1286 if (__val < 0) \ 1287 __ret = __val; \ 1288 if (__ret) \ 1289 phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ 1290 __ret; \ 1291 }) 1292 1293 /** 1294 * __phy_read - convenience function for reading a given PHY register 1295 * @phydev: the phy_device struct 1296 * @regnum: register number to read 1297 * 1298 * The caller must have taken the MDIO bus lock. 1299 */ 1300 static inline int __phy_read(struct phy_device *phydev, u32 regnum) 1301 { 1302 return __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); 1303 } 1304 1305 /** 1306 * phy_write - Convenience function for writing a given PHY register 1307 * @phydev: the phy_device struct 1308 * @regnum: register number to write 1309 * @val: value to write to @regnum 1310 * 1311 * NOTE: MUST NOT be called from interrupt context, 1312 * because the bus read/write functions may wait for an interrupt 1313 * to conclude the operation. 1314 */ 1315 static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) 1316 { 1317 return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val); 1318 } 1319 1320 /** 1321 * __phy_write - Convenience function for writing a given PHY register 1322 * @phydev: the phy_device struct 1323 * @regnum: register number to write 1324 * @val: value to write to @regnum 1325 * 1326 * The caller must have taken the MDIO bus lock. 1327 */ 1328 static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val) 1329 { 1330 return __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, 1331 val); 1332 } 1333 1334 /** 1335 * __phy_modify_changed() - Convenience function for modifying a PHY register 1336 * @phydev: a pointer to a &struct phy_device 1337 * @regnum: register number 1338 * @mask: bit mask of bits to clear 1339 * @set: bit mask of bits to set 1340 * 1341 * Unlocked helper function which allows a PHY register to be modified as 1342 * new register value = (old register value & ~mask) | set 1343 * 1344 * Returns negative errno, 0 if there was no change, and 1 in case of change 1345 */ 1346 static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, 1347 u16 mask, u16 set) 1348 { 1349 return __mdiobus_modify_changed(phydev->mdio.bus, phydev->mdio.addr, 1350 regnum, mask, set); 1351 } 1352 1353 /* 1354 * phy_read_mmd - Convenience function for reading a register 1355 * from an MMD on a given PHY. 1356 */ 1357 int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); 1358 1359 /** 1360 * phy_read_mmd_poll_timeout - Periodically poll a PHY register until a 1361 * condition is met or a timeout occurs 1362 * 1363 * @phydev: The phy_device struct 1364 * @devaddr: The MMD to read from 1365 * @regnum: The register on the MMD to read 1366 * @val: Variable to read the register into 1367 * @cond: Break condition (usually involving @val) 1368 * @sleep_us: Maximum time to sleep between reads in us (0 1369 * tight-loops). Should be less than ~20ms since usleep_range 1370 * is used (see Documentation/timers/timers-howto.rst). 1371 * @timeout_us: Timeout in us, 0 means never timeout 1372 * @sleep_before_read: if it is true, sleep @sleep_us before read. 1373 * Returns 0 on success and -ETIMEDOUT upon a timeout. In either 1374 * case, the last read value at @args is stored in @val. Must not 1375 * be called from atomic context if sleep_us or timeout_us are used. 1376 */ 1377 #define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ 1378 sleep_us, timeout_us, sleep_before_read) \ 1379 ({ \ 1380 int __ret, __val; \ 1381 __ret = read_poll_timeout(__val = phy_read_mmd, val, \ 1382 __val < 0 || (cond), \ 1383 sleep_us, timeout_us, sleep_before_read, \ 1384 phydev, devaddr, regnum); \ 1385 if (__val < 0) \ 1386 __ret = __val; \ 1387 if (__ret) \ 1388 phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ 1389 __ret; \ 1390 }) 1391 1392 /* 1393 * __phy_read_mmd - Convenience function for reading a register 1394 * from an MMD on a given PHY. 1395 */ 1396 int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); 1397 1398 /* 1399 * phy_write_mmd - Convenience function for writing a register 1400 * on an MMD on a given PHY. 1401 */ 1402 int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); 1403 1404 /* 1405 * __phy_write_mmd - Convenience function for writing a register 1406 * on an MMD on a given PHY. 1407 */ 1408 int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); 1409 1410 int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, 1411 u16 set); 1412 int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, 1413 u16 set); 1414 int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); 1415 int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set); 1416 1417 int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum, 1418 u16 mask, u16 set); 1419 int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum, 1420 u16 mask, u16 set); 1421 int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum, 1422 u16 mask, u16 set); 1423 int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum, 1424 u16 mask, u16 set); 1425 1426 /** 1427 * __phy_set_bits - Convenience function for setting bits in a PHY register 1428 * @phydev: the phy_device struct 1429 * @regnum: register number to write 1430 * @val: bits to set 1431 * 1432 * The caller must have taken the MDIO bus lock. 1433 */ 1434 static inline int __phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val) 1435 { 1436 return __phy_modify(phydev, regnum, 0, val); 1437 } 1438 1439 /** 1440 * __phy_clear_bits - Convenience function for clearing bits in a PHY register 1441 * @phydev: the phy_device struct 1442 * @regnum: register number to write 1443 * @val: bits to clear 1444 * 1445 * The caller must have taken the MDIO bus lock. 1446 */ 1447 static inline int __phy_clear_bits(struct phy_device *phydev, u32 regnum, 1448 u16 val) 1449 { 1450 return __phy_modify(phydev, regnum, val, 0); 1451 } 1452 1453 /** 1454 * phy_set_bits - Convenience function for setting bits in a PHY register 1455 * @phydev: the phy_device struct 1456 * @regnum: register number to write 1457 * @val: bits to set 1458 */ 1459 static inline int phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val) 1460 { 1461 return phy_modify(phydev, regnum, 0, val); 1462 } 1463 1464 /** 1465 * phy_clear_bits - Convenience function for clearing bits in a PHY register 1466 * @phydev: the phy_device struct 1467 * @regnum: register number to write 1468 * @val: bits to clear 1469 */ 1470 static inline int phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val) 1471 { 1472 return phy_modify(phydev, regnum, val, 0); 1473 } 1474 1475 /** 1476 * __phy_set_bits_mmd - Convenience function for setting bits in a register 1477 * on MMD 1478 * @phydev: the phy_device struct 1479 * @devad: the MMD containing register to modify 1480 * @regnum: register number to modify 1481 * @val: bits to set 1482 * 1483 * The caller must have taken the MDIO bus lock. 1484 */ 1485 static inline int __phy_set_bits_mmd(struct phy_device *phydev, int devad, 1486 u32 regnum, u16 val) 1487 { 1488 return __phy_modify_mmd(phydev, devad, regnum, 0, val); 1489 } 1490 1491 /** 1492 * __phy_clear_bits_mmd - Convenience function for clearing bits in a register 1493 * on MMD 1494 * @phydev: the phy_device struct 1495 * @devad: the MMD containing register to modify 1496 * @regnum: register number to modify 1497 * @val: bits to clear 1498 * 1499 * The caller must have taken the MDIO bus lock. 1500 */ 1501 static inline int __phy_clear_bits_mmd(struct phy_device *phydev, int devad, 1502 u32 regnum, u16 val) 1503 { 1504 return __phy_modify_mmd(phydev, devad, regnum, val, 0); 1505 } 1506 1507 /** 1508 * phy_set_bits_mmd - Convenience function for setting bits in a register 1509 * on MMD 1510 * @phydev: the phy_device struct 1511 * @devad: the MMD containing register to modify 1512 * @regnum: register number to modify 1513 * @val: bits to set 1514 */ 1515 static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad, 1516 u32 regnum, u16 val) 1517 { 1518 return phy_modify_mmd(phydev, devad, regnum, 0, val); 1519 } 1520 1521 /** 1522 * phy_clear_bits_mmd - Convenience function for clearing bits in a register 1523 * on MMD 1524 * @phydev: the phy_device struct 1525 * @devad: the MMD containing register to modify 1526 * @regnum: register number to modify 1527 * @val: bits to clear 1528 */ 1529 static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad, 1530 u32 regnum, u16 val) 1531 { 1532 return phy_modify_mmd(phydev, devad, regnum, val, 0); 1533 } 1534 1535 /** 1536 * phy_interrupt_is_valid - Convenience function for testing a given PHY irq 1537 * @phydev: the phy_device struct 1538 * 1539 * NOTE: must be kept in sync with addition/removal of PHY_POLL and 1540 * PHY_MAC_INTERRUPT 1541 */ 1542 static inline bool phy_interrupt_is_valid(struct phy_device *phydev) 1543 { 1544 return phydev->irq != PHY_POLL && phydev->irq != PHY_MAC_INTERRUPT; 1545 } 1546 1547 /** 1548 * phy_polling_mode - Convenience function for testing whether polling is 1549 * used to detect PHY status changes 1550 * @phydev: the phy_device struct 1551 */ 1552 static inline bool phy_polling_mode(struct phy_device *phydev) 1553 { 1554 if (phydev->state == PHY_CABLETEST) 1555 if (phydev->drv->flags & PHY_POLL_CABLE_TEST) 1556 return true; 1557 1558 return phydev->irq == PHY_POLL; 1559 } 1560 1561 /** 1562 * phy_has_hwtstamp - Tests whether a PHY time stamp configuration. 1563 * @phydev: the phy_device struct 1564 */ 1565 static inline bool phy_has_hwtstamp(struct phy_device *phydev) 1566 { 1567 return phydev && phydev->mii_ts && phydev->mii_ts->hwtstamp; 1568 } 1569 1570 /** 1571 * phy_has_rxtstamp - Tests whether a PHY supports receive time stamping. 1572 * @phydev: the phy_device struct 1573 */ 1574 static inline bool phy_has_rxtstamp(struct phy_device *phydev) 1575 { 1576 return phydev && phydev->mii_ts && phydev->mii_ts->rxtstamp; 1577 } 1578 1579 /** 1580 * phy_has_tsinfo - Tests whether a PHY reports time stamping and/or 1581 * PTP hardware clock capabilities. 1582 * @phydev: the phy_device struct 1583 */ 1584 static inline bool phy_has_tsinfo(struct phy_device *phydev) 1585 { 1586 return phydev && phydev->mii_ts && phydev->mii_ts->ts_info; 1587 } 1588 1589 /** 1590 * phy_has_txtstamp - Tests whether a PHY supports transmit time stamping. 1591 * @phydev: the phy_device struct 1592 */ 1593 static inline bool phy_has_txtstamp(struct phy_device *phydev) 1594 { 1595 return phydev && phydev->mii_ts && phydev->mii_ts->txtstamp; 1596 } 1597 1598 static inline int phy_hwtstamp(struct phy_device *phydev, 1599 struct kernel_hwtstamp_config *cfg, 1600 struct netlink_ext_ack *extack) 1601 { 1602 return phydev->mii_ts->hwtstamp(phydev->mii_ts, cfg, extack); 1603 } 1604 1605 static inline bool phy_rxtstamp(struct phy_device *phydev, struct sk_buff *skb, 1606 int type) 1607 { 1608 return phydev->mii_ts->rxtstamp(phydev->mii_ts, skb, type); 1609 } 1610 1611 static inline int phy_ts_info(struct phy_device *phydev, 1612 struct ethtool_ts_info *tsinfo) 1613 { 1614 return phydev->mii_ts->ts_info(phydev->mii_ts, tsinfo); 1615 } 1616 1617 static inline void phy_txtstamp(struct phy_device *phydev, struct sk_buff *skb, 1618 int type) 1619 { 1620 phydev->mii_ts->txtstamp(phydev->mii_ts, skb, type); 1621 } 1622 1623 /** 1624 * phy_is_internal - Convenience function for testing if a PHY is internal 1625 * @phydev: the phy_device struct 1626 */ 1627 static inline bool phy_is_internal(struct phy_device *phydev) 1628 { 1629 return phydev->is_internal; 1630 } 1631 1632 /** 1633 * phy_on_sfp - Convenience function for testing if a PHY is on an SFP module 1634 * @phydev: the phy_device struct 1635 */ 1636 static inline bool phy_on_sfp(struct phy_device *phydev) 1637 { 1638 return phydev->is_on_sfp_module; 1639 } 1640 1641 /** 1642 * phy_interface_mode_is_rgmii - Convenience function for testing if a 1643 * PHY interface mode is RGMII (all variants) 1644 * @mode: the &phy_interface_t enum 1645 */ 1646 static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode) 1647 { 1648 return mode >= PHY_INTERFACE_MODE_RGMII && 1649 mode <= PHY_INTERFACE_MODE_RGMII_TXID; 1650 }; 1651 1652 /** 1653 * phy_interface_mode_is_8023z() - does the PHY interface mode use 802.3z 1654 * negotiation 1655 * @mode: one of &enum phy_interface_t 1656 * 1657 * Returns true if the PHY interface mode uses the 16-bit negotiation 1658 * word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding) 1659 */ 1660 static inline bool phy_interface_mode_is_8023z(phy_interface_t mode) 1661 { 1662 return mode == PHY_INTERFACE_MODE_1000BASEX || 1663 mode == PHY_INTERFACE_MODE_2500BASEX; 1664 } 1665 1666 /** 1667 * phy_interface_is_rgmii - Convenience function for testing if a PHY interface 1668 * is RGMII (all variants) 1669 * @phydev: the phy_device struct 1670 */ 1671 static inline bool phy_interface_is_rgmii(struct phy_device *phydev) 1672 { 1673 return phy_interface_mode_is_rgmii(phydev->interface); 1674 }; 1675 1676 /** 1677 * phy_is_pseudo_fixed_link - Convenience function for testing if this 1678 * PHY is the CPU port facing side of an Ethernet switch, or similar. 1679 * @phydev: the phy_device struct 1680 */ 1681 static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev) 1682 { 1683 return phydev->is_pseudo_fixed_link; 1684 } 1685 1686 int phy_save_page(struct phy_device *phydev); 1687 int phy_select_page(struct phy_device *phydev, int page); 1688 int phy_restore_page(struct phy_device *phydev, int oldpage, int ret); 1689 int phy_read_paged(struct phy_device *phydev, int page, u32 regnum); 1690 int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val); 1691 int phy_modify_paged_changed(struct phy_device *phydev, int page, u32 regnum, 1692 u16 mask, u16 set); 1693 int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, 1694 u16 mask, u16 set); 1695 1696 struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id, 1697 bool is_c45, 1698 struct phy_c45_device_ids *c45_ids); 1699 #if IS_ENABLED(CONFIG_PHYLIB) 1700 int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id); 1701 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode); 1702 struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode); 1703 struct phy_device *device_phy_find_device(struct device *dev); 1704 struct fwnode_handle *fwnode_get_phy_node(const struct fwnode_handle *fwnode); 1705 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); 1706 int phy_device_register(struct phy_device *phy); 1707 void phy_device_free(struct phy_device *phydev); 1708 #else 1709 static inline int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id) 1710 { 1711 return 0; 1712 } 1713 static inline 1714 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode) 1715 { 1716 return 0; 1717 } 1718 1719 static inline 1720 struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode) 1721 { 1722 return NULL; 1723 } 1724 1725 static inline struct phy_device *device_phy_find_device(struct device *dev) 1726 { 1727 return NULL; 1728 } 1729 1730 static inline 1731 struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode) 1732 { 1733 return NULL; 1734 } 1735 1736 static inline 1737 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) 1738 { 1739 return NULL; 1740 } 1741 1742 static inline int phy_device_register(struct phy_device *phy) 1743 { 1744 return 0; 1745 } 1746 1747 static inline void phy_device_free(struct phy_device *phydev) { } 1748 #endif /* CONFIG_PHYLIB */ 1749 void phy_device_remove(struct phy_device *phydev); 1750 int phy_get_c45_ids(struct phy_device *phydev); 1751 int phy_init_hw(struct phy_device *phydev); 1752 int phy_suspend(struct phy_device *phydev); 1753 int phy_resume(struct phy_device *phydev); 1754 int __phy_resume(struct phy_device *phydev); 1755 int phy_loopback(struct phy_device *phydev, bool enable); 1756 void phy_sfp_attach(void *upstream, struct sfp_bus *bus); 1757 void phy_sfp_detach(void *upstream, struct sfp_bus *bus); 1758 int phy_sfp_probe(struct phy_device *phydev, 1759 const struct sfp_upstream_ops *ops); 1760 struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, 1761 phy_interface_t interface); 1762 struct phy_device *phy_find_first(struct mii_bus *bus); 1763 int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, 1764 u32 flags, phy_interface_t interface); 1765 int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, 1766 void (*handler)(struct net_device *), 1767 phy_interface_t interface); 1768 struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, 1769 void (*handler)(struct net_device *), 1770 phy_interface_t interface); 1771 void phy_disconnect(struct phy_device *phydev); 1772 void phy_detach(struct phy_device *phydev); 1773 void phy_start(struct phy_device *phydev); 1774 void phy_stop(struct phy_device *phydev); 1775 int phy_config_aneg(struct phy_device *phydev); 1776 int _phy_start_aneg(struct phy_device *phydev); 1777 int phy_start_aneg(struct phy_device *phydev); 1778 int phy_aneg_done(struct phy_device *phydev); 1779 int phy_speed_down(struct phy_device *phydev, bool sync); 1780 int phy_speed_up(struct phy_device *phydev); 1781 bool phy_check_valid(int speed, int duplex, unsigned long *features); 1782 1783 int phy_restart_aneg(struct phy_device *phydev); 1784 int phy_reset_after_clk_enable(struct phy_device *phydev); 1785 1786 #if IS_ENABLED(CONFIG_PHYLIB) 1787 int phy_start_cable_test(struct phy_device *phydev, 1788 struct netlink_ext_ack *extack); 1789 int phy_start_cable_test_tdr(struct phy_device *phydev, 1790 struct netlink_ext_ack *extack, 1791 const struct phy_tdr_config *config); 1792 #else 1793 static inline 1794 int phy_start_cable_test(struct phy_device *phydev, 1795 struct netlink_ext_ack *extack) 1796 { 1797 NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support"); 1798 return -EOPNOTSUPP; 1799 } 1800 static inline 1801 int phy_start_cable_test_tdr(struct phy_device *phydev, 1802 struct netlink_ext_ack *extack, 1803 const struct phy_tdr_config *config) 1804 { 1805 NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support"); 1806 return -EOPNOTSUPP; 1807 } 1808 #endif 1809 1810 static inline void phy_device_reset(struct phy_device *phydev, int value) 1811 { 1812 mdio_device_reset(&phydev->mdio, value); 1813 } 1814 1815 #define phydev_err(_phydev, format, args...) \ 1816 dev_err(&_phydev->mdio.dev, format, ##args) 1817 1818 #define phydev_err_probe(_phydev, err, format, args...) \ 1819 dev_err_probe(&_phydev->mdio.dev, err, format, ##args) 1820 1821 #define phydev_info(_phydev, format, args...) \ 1822 dev_info(&_phydev->mdio.dev, format, ##args) 1823 1824 #define phydev_warn(_phydev, format, args...) \ 1825 dev_warn(&_phydev->mdio.dev, format, ##args) 1826 1827 #define phydev_dbg(_phydev, format, args...) \ 1828 dev_dbg(&_phydev->mdio.dev, format, ##args) 1829 1830 static inline const char *phydev_name(const struct phy_device *phydev) 1831 { 1832 return dev_name(&phydev->mdio.dev); 1833 } 1834 1835 static inline void phy_lock_mdio_bus(struct phy_device *phydev) 1836 { 1837 mutex_lock(&phydev->mdio.bus->mdio_lock); 1838 } 1839 1840 static inline void phy_unlock_mdio_bus(struct phy_device *phydev) 1841 { 1842 mutex_unlock(&phydev->mdio.bus->mdio_lock); 1843 } 1844 1845 void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) 1846 __printf(2, 3); 1847 char *phy_attached_info_irq(struct phy_device *phydev) 1848 __malloc; 1849 void phy_attached_info(struct phy_device *phydev); 1850 1851 /* Clause 22 PHY */ 1852 int genphy_read_abilities(struct phy_device *phydev); 1853 int genphy_setup_forced(struct phy_device *phydev); 1854 int genphy_restart_aneg(struct phy_device *phydev); 1855 int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart); 1856 int genphy_config_eee_advert(struct phy_device *phydev); 1857 int __genphy_config_aneg(struct phy_device *phydev, bool changed); 1858 int genphy_aneg_done(struct phy_device *phydev); 1859 int genphy_update_link(struct phy_device *phydev); 1860 int genphy_read_lpa(struct phy_device *phydev); 1861 int genphy_read_status_fixed(struct phy_device *phydev); 1862 int genphy_read_status(struct phy_device *phydev); 1863 int genphy_read_master_slave(struct phy_device *phydev); 1864 int genphy_suspend(struct phy_device *phydev); 1865 int genphy_resume(struct phy_device *phydev); 1866 int genphy_loopback(struct phy_device *phydev, bool enable); 1867 int genphy_soft_reset(struct phy_device *phydev); 1868 irqreturn_t genphy_handle_interrupt_no_ack(struct phy_device *phydev); 1869 1870 static inline int genphy_config_aneg(struct phy_device *phydev) 1871 { 1872 return __genphy_config_aneg(phydev, false); 1873 } 1874 1875 static inline int genphy_no_config_intr(struct phy_device *phydev) 1876 { 1877 return 0; 1878 } 1879 int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, 1880 u16 regnum); 1881 int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, 1882 u16 regnum, u16 val); 1883 1884 /* Clause 37 */ 1885 int genphy_c37_config_aneg(struct phy_device *phydev); 1886 int genphy_c37_read_status(struct phy_device *phydev, bool *changed); 1887 1888 /* Clause 45 PHY */ 1889 int genphy_c45_restart_aneg(struct phy_device *phydev); 1890 int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart); 1891 int genphy_c45_aneg_done(struct phy_device *phydev); 1892 int genphy_c45_read_link(struct phy_device *phydev); 1893 int genphy_c45_read_lpa(struct phy_device *phydev); 1894 int genphy_c45_read_pma(struct phy_device *phydev); 1895 int genphy_c45_pma_setup_forced(struct phy_device *phydev); 1896 int genphy_c45_pma_baset1_setup_master_slave(struct phy_device *phydev); 1897 int genphy_c45_an_config_aneg(struct phy_device *phydev); 1898 int genphy_c45_an_disable_aneg(struct phy_device *phydev); 1899 int genphy_c45_read_mdix(struct phy_device *phydev); 1900 int genphy_c45_pma_read_abilities(struct phy_device *phydev); 1901 int genphy_c45_pma_read_ext_abilities(struct phy_device *phydev); 1902 int genphy_c45_pma_baset1_read_abilities(struct phy_device *phydev); 1903 int genphy_c45_read_eee_abilities(struct phy_device *phydev); 1904 int genphy_c45_pma_baset1_read_master_slave(struct phy_device *phydev); 1905 int genphy_c45_read_status(struct phy_device *phydev); 1906 int genphy_c45_baset1_read_status(struct phy_device *phydev); 1907 int genphy_c45_config_aneg(struct phy_device *phydev); 1908 int genphy_c45_loopback(struct phy_device *phydev, bool enable); 1909 int genphy_c45_pma_resume(struct phy_device *phydev); 1910 int genphy_c45_pma_suspend(struct phy_device *phydev); 1911 int genphy_c45_fast_retrain(struct phy_device *phydev, bool enable); 1912 int genphy_c45_plca_get_cfg(struct phy_device *phydev, 1913 struct phy_plca_cfg *plca_cfg); 1914 int genphy_c45_plca_set_cfg(struct phy_device *phydev, 1915 const struct phy_plca_cfg *plca_cfg); 1916 int genphy_c45_plca_get_status(struct phy_device *phydev, 1917 struct phy_plca_status *plca_st); 1918 int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned long *adv, 1919 unsigned long *lp, bool *is_enabled); 1920 int genphy_c45_ethtool_get_eee(struct phy_device *phydev, 1921 struct ethtool_keee *data); 1922 int genphy_c45_ethtool_set_eee(struct phy_device *phydev, 1923 struct ethtool_keee *data); 1924 int genphy_c45_write_eee_adv(struct phy_device *phydev, unsigned long *adv); 1925 int genphy_c45_an_config_eee_aneg(struct phy_device *phydev); 1926 int genphy_c45_read_eee_adv(struct phy_device *phydev, unsigned long *adv); 1927 1928 /* Generic C45 PHY driver */ 1929 extern struct phy_driver genphy_c45_driver; 1930 1931 /* The gen10g_* functions are the old Clause 45 stub */ 1932 int gen10g_config_aneg(struct phy_device *phydev); 1933 1934 static inline int phy_read_status(struct phy_device *phydev) 1935 { 1936 if (!phydev->drv) 1937 return -EIO; 1938 1939 if (phydev->drv->read_status) 1940 return phydev->drv->read_status(phydev); 1941 else 1942 return genphy_read_status(phydev); 1943 } 1944 1945 void phy_driver_unregister(struct phy_driver *drv); 1946 void phy_drivers_unregister(struct phy_driver *drv, int n); 1947 int phy_driver_register(struct phy_driver *new_driver, struct module *owner); 1948 int phy_drivers_register(struct phy_driver *new_driver, int n, 1949 struct module *owner); 1950 void phy_error(struct phy_device *phydev); 1951 void phy_state_machine(struct work_struct *work); 1952 void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies); 1953 void phy_trigger_machine(struct phy_device *phydev); 1954 void phy_mac_interrupt(struct phy_device *phydev); 1955 void phy_start_machine(struct phy_device *phydev); 1956 void phy_stop_machine(struct phy_device *phydev); 1957 void phy_ethtool_ksettings_get(struct phy_device *phydev, 1958 struct ethtool_link_ksettings *cmd); 1959 int phy_ethtool_ksettings_set(struct phy_device *phydev, 1960 const struct ethtool_link_ksettings *cmd); 1961 int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd); 1962 int phy_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); 1963 int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd); 1964 int phy_disable_interrupts(struct phy_device *phydev); 1965 void phy_request_interrupt(struct phy_device *phydev); 1966 void phy_free_interrupt(struct phy_device *phydev); 1967 void phy_print_status(struct phy_device *phydev); 1968 int phy_get_rate_matching(struct phy_device *phydev, 1969 phy_interface_t iface); 1970 void phy_set_max_speed(struct phy_device *phydev, u32 max_speed); 1971 void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode); 1972 void phy_advertise_supported(struct phy_device *phydev); 1973 void phy_advertise_eee_all(struct phy_device *phydev); 1974 void phy_support_sym_pause(struct phy_device *phydev); 1975 void phy_support_asym_pause(struct phy_device *phydev); 1976 void phy_support_eee(struct phy_device *phydev); 1977 void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx, 1978 bool autoneg); 1979 void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx); 1980 bool phy_validate_pause(struct phy_device *phydev, 1981 struct ethtool_pauseparam *pp); 1982 void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause); 1983 1984 s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev, 1985 const int *delay_values, int size, bool is_rx); 1986 1987 void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv, 1988 bool *tx_pause, bool *rx_pause); 1989 1990 int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, 1991 int (*run)(struct phy_device *)); 1992 int phy_register_fixup_for_id(const char *bus_id, 1993 int (*run)(struct phy_device *)); 1994 int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, 1995 int (*run)(struct phy_device *)); 1996 1997 int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask); 1998 int phy_unregister_fixup_for_id(const char *bus_id); 1999 int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask); 2000 2001 int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable); 2002 int phy_get_eee_err(struct phy_device *phydev); 2003 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data); 2004 int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data); 2005 int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); 2006 void phy_ethtool_get_wol(struct phy_device *phydev, 2007 struct ethtool_wolinfo *wol); 2008 int phy_ethtool_get_link_ksettings(struct net_device *ndev, 2009 struct ethtool_link_ksettings *cmd); 2010 int phy_ethtool_set_link_ksettings(struct net_device *ndev, 2011 const struct ethtool_link_ksettings *cmd); 2012 int phy_ethtool_nway_reset(struct net_device *ndev); 2013 int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size); 2014 int of_phy_package_join(struct phy_device *phydev, size_t priv_size); 2015 void phy_package_leave(struct phy_device *phydev); 2016 int devm_phy_package_join(struct device *dev, struct phy_device *phydev, 2017 int base_addr, size_t priv_size); 2018 int devm_of_phy_package_join(struct device *dev, struct phy_device *phydev, 2019 size_t priv_size); 2020 2021 int __init mdio_bus_init(void); 2022 void mdio_bus_exit(void); 2023 2024 int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data); 2025 int phy_ethtool_get_sset_count(struct phy_device *phydev); 2026 int phy_ethtool_get_stats(struct phy_device *phydev, 2027 struct ethtool_stats *stats, u64 *data); 2028 int phy_ethtool_get_plca_cfg(struct phy_device *phydev, 2029 struct phy_plca_cfg *plca_cfg); 2030 int phy_ethtool_set_plca_cfg(struct phy_device *phydev, 2031 const struct phy_plca_cfg *plca_cfg, 2032 struct netlink_ext_ack *extack); 2033 int phy_ethtool_get_plca_status(struct phy_device *phydev, 2034 struct phy_plca_status *plca_st); 2035 2036 int __phy_hwtstamp_get(struct phy_device *phydev, 2037 struct kernel_hwtstamp_config *config); 2038 int __phy_hwtstamp_set(struct phy_device *phydev, 2039 struct kernel_hwtstamp_config *config, 2040 struct netlink_ext_ack *extack); 2041 2042 static inline int phy_package_address(struct phy_device *phydev, 2043 unsigned int addr_offset) 2044 { 2045 struct phy_package_shared *shared = phydev->shared; 2046 u8 base_addr = shared->base_addr; 2047 2048 if (addr_offset >= PHY_MAX_ADDR - base_addr) 2049 return -EIO; 2050 2051 /* we know that addr will be in the range 0..31 and thus the 2052 * implicit cast to a signed int is not a problem. 2053 */ 2054 return base_addr + addr_offset; 2055 } 2056 2057 static inline int phy_package_read(struct phy_device *phydev, 2058 unsigned int addr_offset, u32 regnum) 2059 { 2060 int addr = phy_package_address(phydev, addr_offset); 2061 2062 if (addr < 0) 2063 return addr; 2064 2065 return mdiobus_read(phydev->mdio.bus, addr, regnum); 2066 } 2067 2068 static inline int __phy_package_read(struct phy_device *phydev, 2069 unsigned int addr_offset, u32 regnum) 2070 { 2071 int addr = phy_package_address(phydev, addr_offset); 2072 2073 if (addr < 0) 2074 return addr; 2075 2076 return __mdiobus_read(phydev->mdio.bus, addr, regnum); 2077 } 2078 2079 static inline int phy_package_write(struct phy_device *phydev, 2080 unsigned int addr_offset, u32 regnum, 2081 u16 val) 2082 { 2083 int addr = phy_package_address(phydev, addr_offset); 2084 2085 if (addr < 0) 2086 return addr; 2087 2088 return mdiobus_write(phydev->mdio.bus, addr, regnum, val); 2089 } 2090 2091 static inline int __phy_package_write(struct phy_device *phydev, 2092 unsigned int addr_offset, u32 regnum, 2093 u16 val) 2094 { 2095 int addr = phy_package_address(phydev, addr_offset); 2096 2097 if (addr < 0) 2098 return addr; 2099 2100 return __mdiobus_write(phydev->mdio.bus, addr, regnum, val); 2101 } 2102 2103 int __phy_package_read_mmd(struct phy_device *phydev, 2104 unsigned int addr_offset, int devad, 2105 u32 regnum); 2106 2107 int phy_package_read_mmd(struct phy_device *phydev, 2108 unsigned int addr_offset, int devad, 2109 u32 regnum); 2110 2111 int __phy_package_write_mmd(struct phy_device *phydev, 2112 unsigned int addr_offset, int devad, 2113 u32 regnum, u16 val); 2114 2115 int phy_package_write_mmd(struct phy_device *phydev, 2116 unsigned int addr_offset, int devad, 2117 u32 regnum, u16 val); 2118 2119 static inline bool __phy_package_set_once(struct phy_device *phydev, 2120 unsigned int b) 2121 { 2122 struct phy_package_shared *shared = phydev->shared; 2123 2124 if (!shared) 2125 return false; 2126 2127 return !test_and_set_bit(b, &shared->flags); 2128 } 2129 2130 static inline bool phy_package_init_once(struct phy_device *phydev) 2131 { 2132 return __phy_package_set_once(phydev, PHY_SHARED_F_INIT_DONE); 2133 } 2134 2135 static inline bool phy_package_probe_once(struct phy_device *phydev) 2136 { 2137 return __phy_package_set_once(phydev, PHY_SHARED_F_PROBE_DONE); 2138 } 2139 2140 extern const struct bus_type mdio_bus_type; 2141 2142 struct mdio_board_info { 2143 const char *bus_id; 2144 char modalias[MDIO_NAME_SIZE]; 2145 int mdio_addr; 2146 const void *platform_data; 2147 }; 2148 2149 #if IS_ENABLED(CONFIG_MDIO_DEVICE) 2150 int mdiobus_register_board_info(const struct mdio_board_info *info, 2151 unsigned int n); 2152 #else 2153 static inline int mdiobus_register_board_info(const struct mdio_board_info *i, 2154 unsigned int n) 2155 { 2156 return 0; 2157 } 2158 #endif 2159 2160 2161 /** 2162 * phy_module_driver() - Helper macro for registering PHY drivers 2163 * @__phy_drivers: array of PHY drivers to register 2164 * @__count: Numbers of members in array 2165 * 2166 * Helper macro for PHY drivers which do not do anything special in module 2167 * init/exit. Each module may only use this macro once, and calling it 2168 * replaces module_init() and module_exit(). 2169 */ 2170 #define phy_module_driver(__phy_drivers, __count) \ 2171 static int __init phy_module_init(void) \ 2172 { \ 2173 return phy_drivers_register(__phy_drivers, __count, THIS_MODULE); \ 2174 } \ 2175 module_init(phy_module_init); \ 2176 static void __exit phy_module_exit(void) \ 2177 { \ 2178 phy_drivers_unregister(__phy_drivers, __count); \ 2179 } \ 2180 module_exit(phy_module_exit) 2181 2182 #define module_phy_driver(__phy_drivers) \ 2183 phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers)) 2184 2185 bool phy_driver_is_genphy(struct phy_device *phydev); 2186 bool phy_driver_is_genphy_10g(struct phy_device *phydev); 2187 2188 #endif /* __PHY_H */ 2189