1 /* 2 * MV-643XX ethernet platform device data definition file. 3 */ 4 5 #ifndef __LINUX_MV643XX_ETH_H 6 #define __LINUX_MV643XX_ETH_H 7 8 #include <linux/mbus.h> 9 10 #define MV643XX_ETH_SHARED_NAME "mv643xx_eth" 11 #define MV643XX_ETH_NAME "mv643xx_eth_port" 12 #define MV643XX_ETH_SHARED_REGS 0x2000 13 #define MV643XX_ETH_SHARED_REGS_SIZE 0x2000 14 #define MV643XX_ETH_BAR_4 0x2220 15 #define MV643XX_ETH_SIZE_REG_4 0x2224 16 #define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290 17 18 #define MV643XX_TX_CSUM_DEFAULT_LIMIT 0 19 20 struct mv643xx_eth_shared_platform_data { 21 struct mbus_dram_target_info *dram; 22 struct platform_device *shared_smi; 23 /* 24 * Max packet size for Tx IP/Layer 4 checksum, when set to 0, default 25 * limit of 9KiB will be used. 26 */ 27 int tx_csum_limit; 28 }; 29 30 #define MV643XX_ETH_PHY_ADDR_DEFAULT 0 31 #define MV643XX_ETH_PHY_ADDR(x) (0x80 | (x)) 32 #define MV643XX_ETH_PHY_NONE 0xff 33 34 struct mv643xx_eth_platform_data { 35 /* 36 * Pointer back to our parent instance, and our port number. 37 */ 38 struct platform_device *shared; 39 int port_number; 40 41 /* 42 * Whether a PHY is present, and if yes, at which address. 43 */ 44 int phy_addr; 45 46 /* 47 * Use this MAC address if it is valid, overriding the 48 * address that is already in the hardware. 49 */ 50 u8 mac_addr[6]; 51 52 /* 53 * If speed is 0, autonegotiation is enabled. 54 * Valid values for speed: 0, SPEED_10, SPEED_100, SPEED_1000. 55 * Valid values for duplex: DUPLEX_HALF, DUPLEX_FULL. 56 */ 57 int speed; 58 int duplex; 59 60 /* 61 * How many RX/TX queues to use. 62 */ 63 int rx_queue_count; 64 int tx_queue_count; 65 66 /* 67 * Override default RX/TX queue sizes if nonzero. 68 */ 69 int rx_queue_size; 70 int tx_queue_size; 71 72 /* 73 * Use on-chip SRAM for RX/TX descriptors if size is nonzero 74 * and sufficient to contain all descriptors for the requested 75 * ring sizes. 76 */ 77 unsigned long rx_sram_addr; 78 int rx_sram_size; 79 unsigned long tx_sram_addr; 80 int tx_sram_size; 81 }; 82 83 84 #endif 85