1 /* Primary function overlay window definitions 2 * and service functions used by LPDDR chips 3 */ 4 #ifndef __LINUX_MTD_PFOW_H 5 #define __LINUX_MTD_PFOW_H 6 7 #include <linux/mtd/qinfo.h> 8 9 /* PFOW registers addressing */ 10 /* Address of symbol "P" */ 11 #define PFOW_QUERY_STRING_P 0x0000 12 /* Address of symbol "F" */ 13 #define PFOW_QUERY_STRING_F 0x0002 14 /* Address of symbol "O" */ 15 #define PFOW_QUERY_STRING_O 0x0004 16 /* Address of symbol "W" */ 17 #define PFOW_QUERY_STRING_W 0x0006 18 /* Identification info for LPDDR chip */ 19 #define PFOW_MANUFACTURER_ID 0x0020 20 #define PFOW_DEVICE_ID 0x0022 21 /* Address in PFOW where prog buffer can can be found */ 22 #define PFOW_PROGRAM_BUFFER_OFFSET 0x0040 23 /* Size of program buffer in words */ 24 #define PFOW_PROGRAM_BUFFER_SIZE 0x0042 25 /* Address command code register */ 26 #define PFOW_COMMAND_CODE 0x0080 27 /* command data register */ 28 #define PFOW_COMMAND_DATA 0x0084 29 /* command address register lower address bits */ 30 #define PFOW_COMMAND_ADDRESS_L 0x0088 31 /* command address register upper address bits */ 32 #define PFOW_COMMAND_ADDRESS_H 0x008a 33 /* number of bytes to be proggrammed lower address bits */ 34 #define PFOW_DATA_COUNT_L 0x0090 35 /* number of bytes to be proggrammed higher address bits */ 36 #define PFOW_DATA_COUNT_H 0x0092 37 /* command execution register, the only possible value is 0x01 */ 38 #define PFOW_COMMAND_EXECUTE 0x00c0 39 /* 0x01 should be written at this address to clear buffer */ 40 #define PFOW_CLEAR_PROGRAM_BUFFER 0x00c4 41 /* device program/erase suspend register */ 42 #define PFOW_PROGRAM_ERASE_SUSPEND 0x00c8 43 /* device status register */ 44 #define PFOW_DSR 0x00cc 45 46 /* LPDDR memory device command codes */ 47 /* They are possible values of PFOW command code register */ 48 #define LPDDR_WORD_PROGRAM 0x0041 49 #define LPDDR_BUFF_PROGRAM 0x00E9 50 #define LPDDR_BLOCK_ERASE 0x0020 51 #define LPDDR_LOCK_BLOCK 0x0061 52 #define LPDDR_UNLOCK_BLOCK 0x0062 53 #define LPDDR_READ_BLOCK_LOCK_STATUS 0x0065 54 #define LPDDR_INFO_QUERY 0x0098 55 #define LPDDR_READ_OTP 0x0097 56 #define LPDDR_PROG_OTP 0x00C0 57 #define LPDDR_RESUME 0x00D0 58 59 /* Defines possible value of PFOW command execution register */ 60 #define LPDDR_START_EXECUTION 0x0001 61 62 /* Defines possible value of PFOW program/erase suspend register */ 63 #define LPDDR_SUSPEND 0x0001 64 65 /* Possible values of PFOW device status register */ 66 /* access R - read; RC read & clearable */ 67 #define DSR_DPS (1<<1) /* RC; device protect status 68 * 0 - not protected 1 - locked */ 69 #define DSR_PSS (1<<2) /* R; program suspend status; 70 * 0-prog in progress/completed, 71 * 1- prog suspended */ 72 #define DSR_VPPS (1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */ 73 #define DSR_PROGRAM_STATUS (1<<4) /* RC; 0-successful, 1-error */ 74 #define DSR_ERASE_STATUS (1<<5) /* RC; erase or blank check status; 75 * 0-success erase/blank check, 76 * 1 blank check error */ 77 #define DSR_ESS (1<<6) /* R; erase suspend status; 78 * 0-erase in progress/complete, 79 * 1 erase suspended */ 80 #define DSR_READY_STATUS (1<<7) /* R; Device status 81 * 0-busy, 82 * 1-ready */ 83 #define DSR_RPS (0x3<<8) /* RC; region program status 84 * 00 - Success, 85 * 01-re-program attempt in region with 86 * object mode data, 87 * 10-object mode program w attempt in 88 * region with control mode data 89 * 11-attempt to program invalid half 90 * with 0x41 command */ 91 #define DSR_AOS (1<<12) /* RC; 1- AO related failure */ 92 #define DSR_AVAILABLE (1<<15) /* R; Device availbility 93 * 1 - Device available 94 * 0 - not available */ 95 96 /* The superset of all possible error bits in DSR */ 97 #define DSR_ERR 0x133A 98 99 static inline void send_pfow_command(struct map_info *map, 100 unsigned long cmd_code, unsigned long adr, 101 unsigned long len, map_word *datum) 102 { 103 int bits_per_chip = map_bankwidth(map) * 8; 104 105 map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE); 106 map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)), 107 map->pfow_base + PFOW_COMMAND_ADDRESS_L); 108 map_write(map, CMD(adr>>bits_per_chip), 109 map->pfow_base + PFOW_COMMAND_ADDRESS_H); 110 if (len) { 111 map_write(map, CMD(len & ((1<<bits_per_chip) - 1)), 112 map->pfow_base + PFOW_DATA_COUNT_L); 113 map_write(map, CMD(len>>bits_per_chip), 114 map->pfow_base + PFOW_DATA_COUNT_H); 115 } 116 if (datum) 117 map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA); 118 119 /* Command execution start */ 120 map_write(map, CMD(LPDDR_START_EXECUTION), 121 map->pfow_base + PFOW_COMMAND_EXECUTE); 122 } 123 124 static inline void print_drs_error(unsigned dsr) 125 { 126 int prog_status = (dsr & DSR_RPS) >> 8; 127 128 if (!(dsr & DSR_AVAILABLE)) 129 printk(KERN_NOTICE"DSR.15: (0) Device not Available\n"); 130 if (prog_status & 0x03) 131 printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid " 132 "half with 41h command\n"); 133 else if (prog_status & 0x02) 134 printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt " 135 "in region with Control Mode data\n"); 136 else if (prog_status & 0x01) 137 printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region " 138 "with Object Mode data\n"); 139 if (!(dsr & DSR_READY_STATUS)) 140 printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n"); 141 if (dsr & DSR_ESS) 142 printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n"); 143 if (dsr & DSR_ERASE_STATUS) 144 printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n"); 145 if (dsr & DSR_PROGRAM_STATUS) 146 printk(KERN_NOTICE"DSR.4: (1) Program Error\n"); 147 if (dsr & DSR_VPPS) 148 printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation " 149 "aborted\n"); 150 if (dsr & DSR_PSS) 151 printk(KERN_NOTICE"DSR.2: (1) Program suspended\n"); 152 if (dsr & DSR_DPS) 153 printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt " 154 "on locked block\n"); 155 } 156 #endif /* __LINUX_MTD_PFOW_H */ 157