1 #ifndef _INPUT_H 2 #define _INPUT_H 3 4 /* 5 * Copyright (c) 1999-2002 Vojtech Pavlik 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License version 2 as published by 9 * the Free Software Foundation. 10 */ 11 12 #ifdef __KERNEL__ 13 #include <linux/time.h> 14 #include <linux/list.h> 15 #else 16 #include <sys/time.h> 17 #include <sys/ioctl.h> 18 #include <sys/types.h> 19 #include <linux/types.h> 20 #endif 21 22 /* 23 * The event structure itself 24 */ 25 26 struct input_event { 27 struct timeval time; 28 __u16 type; 29 __u16 code; 30 __s32 value; 31 }; 32 33 /* 34 * Protocol version. 35 */ 36 37 #define EV_VERSION 0x010000 38 39 /* 40 * IOCTLs (0x00 - 0x7f) 41 */ 42 43 struct input_id { 44 __u16 bustype; 45 __u16 vendor; 46 __u16 product; 47 __u16 version; 48 }; 49 50 struct input_absinfo { 51 __s32 value; 52 __s32 minimum; 53 __s32 maximum; 54 __s32 fuzz; 55 __s32 flat; 56 __s32 resolution; 57 }; 58 59 #define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ 60 #define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ 61 #define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ 62 #define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ 63 #define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ 64 #define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ 65 66 #define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ 67 #define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ 68 #define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ 69 70 #define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global keystate */ 71 #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ 72 #define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ 73 #define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ 74 75 #define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + ev, len) /* get event bits */ 76 #define EVIOCGABS(abs) _IOR('E', 0x40 + abs, struct input_absinfo) /* get abs value/limits */ 77 #define EVIOCSABS(abs) _IOW('E', 0xc0 + abs, struct input_absinfo) /* set abs value/limits */ 78 79 #define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */ 80 #define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ 81 #define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ 82 83 #define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ 84 85 /* 86 * Event types 87 */ 88 89 #define EV_SYN 0x00 90 #define EV_KEY 0x01 91 #define EV_REL 0x02 92 #define EV_ABS 0x03 93 #define EV_MSC 0x04 94 #define EV_SW 0x05 95 #define EV_LED 0x11 96 #define EV_SND 0x12 97 #define EV_REP 0x14 98 #define EV_FF 0x15 99 #define EV_PWR 0x16 100 #define EV_FF_STATUS 0x17 101 #define EV_MAX 0x1f 102 #define EV_CNT (EV_MAX+1) 103 104 /* 105 * Synchronization events. 106 */ 107 108 #define SYN_REPORT 0 109 #define SYN_CONFIG 1 110 #define SYN_MT_REPORT 2 111 112 /* 113 * Keys and buttons 114 * 115 * Most of the keys/buttons are modeled after USB HUT 1.12 116 * (see http://www.usb.org/developers/hidpage). 117 * Abbreviations in the comments: 118 * AC - Application Control 119 * AL - Application Launch Button 120 * SC - System Control 121 */ 122 123 #define KEY_RESERVED 0 124 #define KEY_ESC 1 125 #define KEY_1 2 126 #define KEY_2 3 127 #define KEY_3 4 128 #define KEY_4 5 129 #define KEY_5 6 130 #define KEY_6 7 131 #define KEY_7 8 132 #define KEY_8 9 133 #define KEY_9 10 134 #define KEY_0 11 135 #define KEY_MINUS 12 136 #define KEY_EQUAL 13 137 #define KEY_BACKSPACE 14 138 #define KEY_TAB 15 139 #define KEY_Q 16 140 #define KEY_W 17 141 #define KEY_E 18 142 #define KEY_R 19 143 #define KEY_T 20 144 #define KEY_Y 21 145 #define KEY_U 22 146 #define KEY_I 23 147 #define KEY_O 24 148 #define KEY_P 25 149 #define KEY_LEFTBRACE 26 150 #define KEY_RIGHTBRACE 27 151 #define KEY_ENTER 28 152 #define KEY_LEFTCTRL 29 153 #define KEY_A 30 154 #define KEY_S 31 155 #define KEY_D 32 156 #define KEY_F 33 157 #define KEY_G 34 158 #define KEY_H 35 159 #define KEY_J 36 160 #define KEY_K 37 161 #define KEY_L 38 162 #define KEY_SEMICOLON 39 163 #define KEY_APOSTROPHE 40 164 #define KEY_GRAVE 41 165 #define KEY_LEFTSHIFT 42 166 #define KEY_BACKSLASH 43 167 #define KEY_Z 44 168 #define KEY_X 45 169 #define KEY_C 46 170 #define KEY_V 47 171 #define KEY_B 48 172 #define KEY_N 49 173 #define KEY_M 50 174 #define KEY_COMMA 51 175 #define KEY_DOT 52 176 #define KEY_SLASH 53 177 #define KEY_RIGHTSHIFT 54 178 #define KEY_KPASTERISK 55 179 #define KEY_LEFTALT 56 180 #define KEY_SPACE 57 181 #define KEY_CAPSLOCK 58 182 #define KEY_F1 59 183 #define KEY_F2 60 184 #define KEY_F3 61 185 #define KEY_F4 62 186 #define KEY_F5 63 187 #define KEY_F6 64 188 #define KEY_F7 65 189 #define KEY_F8 66 190 #define KEY_F9 67 191 #define KEY_F10 68 192 #define KEY_NUMLOCK 69 193 #define KEY_SCROLLLOCK 70 194 #define KEY_KP7 71 195 #define KEY_KP8 72 196 #define KEY_KP9 73 197 #define KEY_KPMINUS 74 198 #define KEY_KP4 75 199 #define KEY_KP5 76 200 #define KEY_KP6 77 201 #define KEY_KPPLUS 78 202 #define KEY_KP1 79 203 #define KEY_KP2 80 204 #define KEY_KP3 81 205 #define KEY_KP0 82 206 #define KEY_KPDOT 83 207 208 #define KEY_ZENKAKUHANKAKU 85 209 #define KEY_102ND 86 210 #define KEY_F11 87 211 #define KEY_F12 88 212 #define KEY_RO 89 213 #define KEY_KATAKANA 90 214 #define KEY_HIRAGANA 91 215 #define KEY_HENKAN 92 216 #define KEY_KATAKANAHIRAGANA 93 217 #define KEY_MUHENKAN 94 218 #define KEY_KPJPCOMMA 95 219 #define KEY_KPENTER 96 220 #define KEY_RIGHTCTRL 97 221 #define KEY_KPSLASH 98 222 #define KEY_SYSRQ 99 223 #define KEY_RIGHTALT 100 224 #define KEY_LINEFEED 101 225 #define KEY_HOME 102 226 #define KEY_UP 103 227 #define KEY_PAGEUP 104 228 #define KEY_LEFT 105 229 #define KEY_RIGHT 106 230 #define KEY_END 107 231 #define KEY_DOWN 108 232 #define KEY_PAGEDOWN 109 233 #define KEY_INSERT 110 234 #define KEY_DELETE 111 235 #define KEY_MACRO 112 236 #define KEY_MUTE 113 237 #define KEY_VOLUMEDOWN 114 238 #define KEY_VOLUMEUP 115 239 #define KEY_POWER 116 /* SC System Power Down */ 240 #define KEY_KPEQUAL 117 241 #define KEY_KPPLUSMINUS 118 242 #define KEY_PAUSE 119 243 #define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ 244 245 #define KEY_KPCOMMA 121 246 #define KEY_HANGEUL 122 247 #define KEY_HANGUEL KEY_HANGEUL 248 #define KEY_HANJA 123 249 #define KEY_YEN 124 250 #define KEY_LEFTMETA 125 251 #define KEY_RIGHTMETA 126 252 #define KEY_COMPOSE 127 253 254 #define KEY_STOP 128 /* AC Stop */ 255 #define KEY_AGAIN 129 256 #define KEY_PROPS 130 /* AC Properties */ 257 #define KEY_UNDO 131 /* AC Undo */ 258 #define KEY_FRONT 132 259 #define KEY_COPY 133 /* AC Copy */ 260 #define KEY_OPEN 134 /* AC Open */ 261 #define KEY_PASTE 135 /* AC Paste */ 262 #define KEY_FIND 136 /* AC Search */ 263 #define KEY_CUT 137 /* AC Cut */ 264 #define KEY_HELP 138 /* AL Integrated Help Center */ 265 #define KEY_MENU 139 /* Menu (show menu) */ 266 #define KEY_CALC 140 /* AL Calculator */ 267 #define KEY_SETUP 141 268 #define KEY_SLEEP 142 /* SC System Sleep */ 269 #define KEY_WAKEUP 143 /* System Wake Up */ 270 #define KEY_FILE 144 /* AL Local Machine Browser */ 271 #define KEY_SENDFILE 145 272 #define KEY_DELETEFILE 146 273 #define KEY_XFER 147 274 #define KEY_PROG1 148 275 #define KEY_PROG2 149 276 #define KEY_WWW 150 /* AL Internet Browser */ 277 #define KEY_MSDOS 151 278 #define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ 279 #define KEY_SCREENLOCK KEY_COFFEE 280 #define KEY_DIRECTION 153 281 #define KEY_CYCLEWINDOWS 154 282 #define KEY_MAIL 155 283 #define KEY_BOOKMARKS 156 /* AC Bookmarks */ 284 #define KEY_COMPUTER 157 285 #define KEY_BACK 158 /* AC Back */ 286 #define KEY_FORWARD 159 /* AC Forward */ 287 #define KEY_CLOSECD 160 288 #define KEY_EJECTCD 161 289 #define KEY_EJECTCLOSECD 162 290 #define KEY_NEXTSONG 163 291 #define KEY_PLAYPAUSE 164 292 #define KEY_PREVIOUSSONG 165 293 #define KEY_STOPCD 166 294 #define KEY_RECORD 167 295 #define KEY_REWIND 168 296 #define KEY_PHONE 169 /* Media Select Telephone */ 297 #define KEY_ISO 170 298 #define KEY_CONFIG 171 /* AL Consumer Control Configuration */ 299 #define KEY_HOMEPAGE 172 /* AC Home */ 300 #define KEY_REFRESH 173 /* AC Refresh */ 301 #define KEY_EXIT 174 /* AC Exit */ 302 #define KEY_MOVE 175 303 #define KEY_EDIT 176 304 #define KEY_SCROLLUP 177 305 #define KEY_SCROLLDOWN 178 306 #define KEY_KPLEFTPAREN 179 307 #define KEY_KPRIGHTPAREN 180 308 #define KEY_NEW 181 /* AC New */ 309 #define KEY_REDO 182 /* AC Redo/Repeat */ 310 311 #define KEY_F13 183 312 #define KEY_F14 184 313 #define KEY_F15 185 314 #define KEY_F16 186 315 #define KEY_F17 187 316 #define KEY_F18 188 317 #define KEY_F19 189 318 #define KEY_F20 190 319 #define KEY_F21 191 320 #define KEY_F22 192 321 #define KEY_F23 193 322 #define KEY_F24 194 323 324 #define KEY_PLAYCD 200 325 #define KEY_PAUSECD 201 326 #define KEY_PROG3 202 327 #define KEY_PROG4 203 328 #define KEY_DASHBOARD 204 /* AL Dashboard */ 329 #define KEY_SUSPEND 205 330 #define KEY_CLOSE 206 /* AC Close */ 331 #define KEY_PLAY 207 332 #define KEY_FASTFORWARD 208 333 #define KEY_BASSBOOST 209 334 #define KEY_PRINT 210 /* AC Print */ 335 #define KEY_HP 211 336 #define KEY_CAMERA 212 337 #define KEY_SOUND 213 338 #define KEY_QUESTION 214 339 #define KEY_EMAIL 215 340 #define KEY_CHAT 216 341 #define KEY_SEARCH 217 342 #define KEY_CONNECT 218 343 #define KEY_FINANCE 219 /* AL Checkbook/Finance */ 344 #define KEY_SPORT 220 345 #define KEY_SHOP 221 346 #define KEY_ALTERASE 222 347 #define KEY_CANCEL 223 /* AC Cancel */ 348 #define KEY_BRIGHTNESSDOWN 224 349 #define KEY_BRIGHTNESSUP 225 350 #define KEY_MEDIA 226 351 352 #define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video 353 outputs (Monitor/LCD/TV-out/etc) */ 354 #define KEY_KBDILLUMTOGGLE 228 355 #define KEY_KBDILLUMDOWN 229 356 #define KEY_KBDILLUMUP 230 357 358 #define KEY_SEND 231 /* AC Send */ 359 #define KEY_REPLY 232 /* AC Reply */ 360 #define KEY_FORWARDMAIL 233 /* AC Forward Msg */ 361 #define KEY_SAVE 234 /* AC Save */ 362 #define KEY_DOCUMENTS 235 363 364 #define KEY_BATTERY 236 365 366 #define KEY_BLUETOOTH 237 367 #define KEY_WLAN 238 368 #define KEY_UWB 239 369 370 #define KEY_UNKNOWN 240 371 372 #define KEY_VIDEO_NEXT 241 /* drive next video source */ 373 #define KEY_VIDEO_PREV 242 /* drive previous video source */ 374 #define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ 375 #define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ 376 #define KEY_DISPLAY_OFF 245 /* display device to off state */ 377 378 #define KEY_WIMAX 246 379 #define KEY_RFKILL 247 /* Key that controls all radios */ 380 381 /* Code 255 is reserved for special needs of AT keyboard driver */ 382 383 #define BTN_MISC 0x100 384 #define BTN_0 0x100 385 #define BTN_1 0x101 386 #define BTN_2 0x102 387 #define BTN_3 0x103 388 #define BTN_4 0x104 389 #define BTN_5 0x105 390 #define BTN_6 0x106 391 #define BTN_7 0x107 392 #define BTN_8 0x108 393 #define BTN_9 0x109 394 395 #define BTN_MOUSE 0x110 396 #define BTN_LEFT 0x110 397 #define BTN_RIGHT 0x111 398 #define BTN_MIDDLE 0x112 399 #define BTN_SIDE 0x113 400 #define BTN_EXTRA 0x114 401 #define BTN_FORWARD 0x115 402 #define BTN_BACK 0x116 403 #define BTN_TASK 0x117 404 405 #define BTN_JOYSTICK 0x120 406 #define BTN_TRIGGER 0x120 407 #define BTN_THUMB 0x121 408 #define BTN_THUMB2 0x122 409 #define BTN_TOP 0x123 410 #define BTN_TOP2 0x124 411 #define BTN_PINKIE 0x125 412 #define BTN_BASE 0x126 413 #define BTN_BASE2 0x127 414 #define BTN_BASE3 0x128 415 #define BTN_BASE4 0x129 416 #define BTN_BASE5 0x12a 417 #define BTN_BASE6 0x12b 418 #define BTN_DEAD 0x12f 419 420 #define BTN_GAMEPAD 0x130 421 #define BTN_A 0x130 422 #define BTN_B 0x131 423 #define BTN_C 0x132 424 #define BTN_X 0x133 425 #define BTN_Y 0x134 426 #define BTN_Z 0x135 427 #define BTN_TL 0x136 428 #define BTN_TR 0x137 429 #define BTN_TL2 0x138 430 #define BTN_TR2 0x139 431 #define BTN_SELECT 0x13a 432 #define BTN_START 0x13b 433 #define BTN_MODE 0x13c 434 #define BTN_THUMBL 0x13d 435 #define BTN_THUMBR 0x13e 436 437 #define BTN_DIGI 0x140 438 #define BTN_TOOL_PEN 0x140 439 #define BTN_TOOL_RUBBER 0x141 440 #define BTN_TOOL_BRUSH 0x142 441 #define BTN_TOOL_PENCIL 0x143 442 #define BTN_TOOL_AIRBRUSH 0x144 443 #define BTN_TOOL_FINGER 0x145 444 #define BTN_TOOL_MOUSE 0x146 445 #define BTN_TOOL_LENS 0x147 446 #define BTN_TOUCH 0x14a 447 #define BTN_STYLUS 0x14b 448 #define BTN_STYLUS2 0x14c 449 #define BTN_TOOL_DOUBLETAP 0x14d 450 #define BTN_TOOL_TRIPLETAP 0x14e 451 #define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ 452 453 #define BTN_WHEEL 0x150 454 #define BTN_GEAR_DOWN 0x150 455 #define BTN_GEAR_UP 0x151 456 457 #define KEY_OK 0x160 458 #define KEY_SELECT 0x161 459 #define KEY_GOTO 0x162 460 #define KEY_CLEAR 0x163 461 #define KEY_POWER2 0x164 462 #define KEY_OPTION 0x165 463 #define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ 464 #define KEY_TIME 0x167 465 #define KEY_VENDOR 0x168 466 #define KEY_ARCHIVE 0x169 467 #define KEY_PROGRAM 0x16a /* Media Select Program Guide */ 468 #define KEY_CHANNEL 0x16b 469 #define KEY_FAVORITES 0x16c 470 #define KEY_EPG 0x16d 471 #define KEY_PVR 0x16e /* Media Select Home */ 472 #define KEY_MHP 0x16f 473 #define KEY_LANGUAGE 0x170 474 #define KEY_TITLE 0x171 475 #define KEY_SUBTITLE 0x172 476 #define KEY_ANGLE 0x173 477 #define KEY_ZOOM 0x174 478 #define KEY_MODE 0x175 479 #define KEY_KEYBOARD 0x176 480 #define KEY_SCREEN 0x177 481 #define KEY_PC 0x178 /* Media Select Computer */ 482 #define KEY_TV 0x179 /* Media Select TV */ 483 #define KEY_TV2 0x17a /* Media Select Cable */ 484 #define KEY_VCR 0x17b /* Media Select VCR */ 485 #define KEY_VCR2 0x17c /* VCR Plus */ 486 #define KEY_SAT 0x17d /* Media Select Satellite */ 487 #define KEY_SAT2 0x17e 488 #define KEY_CD 0x17f /* Media Select CD */ 489 #define KEY_TAPE 0x180 /* Media Select Tape */ 490 #define KEY_RADIO 0x181 491 #define KEY_TUNER 0x182 /* Media Select Tuner */ 492 #define KEY_PLAYER 0x183 493 #define KEY_TEXT 0x184 494 #define KEY_DVD 0x185 /* Media Select DVD */ 495 #define KEY_AUX 0x186 496 #define KEY_MP3 0x187 497 #define KEY_AUDIO 0x188 498 #define KEY_VIDEO 0x189 499 #define KEY_DIRECTORY 0x18a 500 #define KEY_LIST 0x18b 501 #define KEY_MEMO 0x18c /* Media Select Messages */ 502 #define KEY_CALENDAR 0x18d 503 #define KEY_RED 0x18e 504 #define KEY_GREEN 0x18f 505 #define KEY_YELLOW 0x190 506 #define KEY_BLUE 0x191 507 #define KEY_CHANNELUP 0x192 /* Channel Increment */ 508 #define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ 509 #define KEY_FIRST 0x194 510 #define KEY_LAST 0x195 /* Recall Last */ 511 #define KEY_AB 0x196 512 #define KEY_NEXT 0x197 513 #define KEY_RESTART 0x198 514 #define KEY_SLOW 0x199 515 #define KEY_SHUFFLE 0x19a 516 #define KEY_BREAK 0x19b 517 #define KEY_PREVIOUS 0x19c 518 #define KEY_DIGITS 0x19d 519 #define KEY_TEEN 0x19e 520 #define KEY_TWEN 0x19f 521 #define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ 522 #define KEY_GAMES 0x1a1 /* Media Select Games */ 523 #define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ 524 #define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ 525 #define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ 526 #define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ 527 #define KEY_EDITOR 0x1a6 /* AL Text Editor */ 528 #define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ 529 #define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ 530 #define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ 531 #define KEY_DATABASE 0x1aa /* AL Database App */ 532 #define KEY_NEWS 0x1ab /* AL Newsreader */ 533 #define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ 534 #define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ 535 #define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ 536 #define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ 537 #define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ 538 #define KEY_LOGOFF 0x1b1 /* AL Logoff */ 539 540 #define KEY_DOLLAR 0x1b2 541 #define KEY_EURO 0x1b3 542 543 #define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ 544 #define KEY_FRAMEFORWARD 0x1b5 545 #define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ 546 #define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ 547 548 #define KEY_DEL_EOL 0x1c0 549 #define KEY_DEL_EOS 0x1c1 550 #define KEY_INS_LINE 0x1c2 551 #define KEY_DEL_LINE 0x1c3 552 553 #define KEY_FN 0x1d0 554 #define KEY_FN_ESC 0x1d1 555 #define KEY_FN_F1 0x1d2 556 #define KEY_FN_F2 0x1d3 557 #define KEY_FN_F3 0x1d4 558 #define KEY_FN_F4 0x1d5 559 #define KEY_FN_F5 0x1d6 560 #define KEY_FN_F6 0x1d7 561 #define KEY_FN_F7 0x1d8 562 #define KEY_FN_F8 0x1d9 563 #define KEY_FN_F9 0x1da 564 #define KEY_FN_F10 0x1db 565 #define KEY_FN_F11 0x1dc 566 #define KEY_FN_F12 0x1dd 567 #define KEY_FN_1 0x1de 568 #define KEY_FN_2 0x1df 569 #define KEY_FN_D 0x1e0 570 #define KEY_FN_E 0x1e1 571 #define KEY_FN_F 0x1e2 572 #define KEY_FN_S 0x1e3 573 #define KEY_FN_B 0x1e4 574 575 #define KEY_BRL_DOT1 0x1f1 576 #define KEY_BRL_DOT2 0x1f2 577 #define KEY_BRL_DOT3 0x1f3 578 #define KEY_BRL_DOT4 0x1f4 579 #define KEY_BRL_DOT5 0x1f5 580 #define KEY_BRL_DOT6 0x1f6 581 #define KEY_BRL_DOT7 0x1f7 582 #define KEY_BRL_DOT8 0x1f8 583 #define KEY_BRL_DOT9 0x1f9 584 #define KEY_BRL_DOT10 0x1fa 585 586 #define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ 587 #define KEY_NUMERIC_1 0x201 /* and other keypads */ 588 #define KEY_NUMERIC_2 0x202 589 #define KEY_NUMERIC_3 0x203 590 #define KEY_NUMERIC_4 0x204 591 #define KEY_NUMERIC_5 0x205 592 #define KEY_NUMERIC_6 0x206 593 #define KEY_NUMERIC_7 0x207 594 #define KEY_NUMERIC_8 0x208 595 #define KEY_NUMERIC_9 0x209 596 #define KEY_NUMERIC_STAR 0x20a 597 #define KEY_NUMERIC_POUND 0x20b 598 599 #define KEY_CAMERA_FOCUS 0x210 600 #define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ 601 602 #define BTN_TRIGGER_HAPPY 0x2c0 603 #define BTN_TRIGGER_HAPPY1 0x2c0 604 #define BTN_TRIGGER_HAPPY2 0x2c1 605 #define BTN_TRIGGER_HAPPY3 0x2c2 606 #define BTN_TRIGGER_HAPPY4 0x2c3 607 #define BTN_TRIGGER_HAPPY5 0x2c4 608 #define BTN_TRIGGER_HAPPY6 0x2c5 609 #define BTN_TRIGGER_HAPPY7 0x2c6 610 #define BTN_TRIGGER_HAPPY8 0x2c7 611 #define BTN_TRIGGER_HAPPY9 0x2c8 612 #define BTN_TRIGGER_HAPPY10 0x2c9 613 #define BTN_TRIGGER_HAPPY11 0x2ca 614 #define BTN_TRIGGER_HAPPY12 0x2cb 615 #define BTN_TRIGGER_HAPPY13 0x2cc 616 #define BTN_TRIGGER_HAPPY14 0x2cd 617 #define BTN_TRIGGER_HAPPY15 0x2ce 618 #define BTN_TRIGGER_HAPPY16 0x2cf 619 #define BTN_TRIGGER_HAPPY17 0x2d0 620 #define BTN_TRIGGER_HAPPY18 0x2d1 621 #define BTN_TRIGGER_HAPPY19 0x2d2 622 #define BTN_TRIGGER_HAPPY20 0x2d3 623 #define BTN_TRIGGER_HAPPY21 0x2d4 624 #define BTN_TRIGGER_HAPPY22 0x2d5 625 #define BTN_TRIGGER_HAPPY23 0x2d6 626 #define BTN_TRIGGER_HAPPY24 0x2d7 627 #define BTN_TRIGGER_HAPPY25 0x2d8 628 #define BTN_TRIGGER_HAPPY26 0x2d9 629 #define BTN_TRIGGER_HAPPY27 0x2da 630 #define BTN_TRIGGER_HAPPY28 0x2db 631 #define BTN_TRIGGER_HAPPY29 0x2dc 632 #define BTN_TRIGGER_HAPPY30 0x2dd 633 #define BTN_TRIGGER_HAPPY31 0x2de 634 #define BTN_TRIGGER_HAPPY32 0x2df 635 #define BTN_TRIGGER_HAPPY33 0x2e0 636 #define BTN_TRIGGER_HAPPY34 0x2e1 637 #define BTN_TRIGGER_HAPPY35 0x2e2 638 #define BTN_TRIGGER_HAPPY36 0x2e3 639 #define BTN_TRIGGER_HAPPY37 0x2e4 640 #define BTN_TRIGGER_HAPPY38 0x2e5 641 #define BTN_TRIGGER_HAPPY39 0x2e6 642 #define BTN_TRIGGER_HAPPY40 0x2e7 643 644 /* We avoid low common keys in module aliases so they don't get huge. */ 645 #define KEY_MIN_INTERESTING KEY_MUTE 646 #define KEY_MAX 0x2ff 647 #define KEY_CNT (KEY_MAX+1) 648 649 /* 650 * Relative axes 651 */ 652 653 #define REL_X 0x00 654 #define REL_Y 0x01 655 #define REL_Z 0x02 656 #define REL_RX 0x03 657 #define REL_RY 0x04 658 #define REL_RZ 0x05 659 #define REL_HWHEEL 0x06 660 #define REL_DIAL 0x07 661 #define REL_WHEEL 0x08 662 #define REL_MISC 0x09 663 #define REL_MAX 0x0f 664 #define REL_CNT (REL_MAX+1) 665 666 /* 667 * Absolute axes 668 */ 669 670 #define ABS_X 0x00 671 #define ABS_Y 0x01 672 #define ABS_Z 0x02 673 #define ABS_RX 0x03 674 #define ABS_RY 0x04 675 #define ABS_RZ 0x05 676 #define ABS_THROTTLE 0x06 677 #define ABS_RUDDER 0x07 678 #define ABS_WHEEL 0x08 679 #define ABS_GAS 0x09 680 #define ABS_BRAKE 0x0a 681 #define ABS_HAT0X 0x10 682 #define ABS_HAT0Y 0x11 683 #define ABS_HAT1X 0x12 684 #define ABS_HAT1Y 0x13 685 #define ABS_HAT2X 0x14 686 #define ABS_HAT2Y 0x15 687 #define ABS_HAT3X 0x16 688 #define ABS_HAT3Y 0x17 689 #define ABS_PRESSURE 0x18 690 #define ABS_DISTANCE 0x19 691 #define ABS_TILT_X 0x1a 692 #define ABS_TILT_Y 0x1b 693 #define ABS_TOOL_WIDTH 0x1c 694 695 #define ABS_VOLUME 0x20 696 697 #define ABS_MISC 0x28 698 699 #define ABS_MT_SLOT 0x2f /* MT slot being modified */ 700 #define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ 701 #define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ 702 #define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ 703 #define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ 704 #define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ 705 #define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ 706 #define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ 707 #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ 708 #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ 709 #define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ 710 #define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ 711 712 #ifdef __KERNEL__ 713 /* Implementation details, userspace should not care about these */ 714 #define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR 715 #define ABS_MT_LAST ABS_MT_PRESSURE 716 #endif 717 718 #define ABS_MAX 0x3f 719 #define ABS_CNT (ABS_MAX+1) 720 721 /* 722 * Switch events 723 */ 724 725 #define SW_LID 0x00 /* set = lid shut */ 726 #define SW_TABLET_MODE 0x01 /* set = tablet mode */ 727 #define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ 728 #define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" 729 set = radio enabled */ 730 #define SW_RADIO SW_RFKILL_ALL /* deprecated */ 731 #define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ 732 #define SW_DOCK 0x05 /* set = plugged into dock */ 733 #define SW_LINEOUT_INSERT 0x06 /* set = inserted */ 734 #define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ 735 #define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ 736 #define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ 737 #define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ 738 #define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ 739 #define SW_MAX 0x0f 740 #define SW_CNT (SW_MAX+1) 741 742 /* 743 * Misc events 744 */ 745 746 #define MSC_SERIAL 0x00 747 #define MSC_PULSELED 0x01 748 #define MSC_GESTURE 0x02 749 #define MSC_RAW 0x03 750 #define MSC_SCAN 0x04 751 #define MSC_MAX 0x07 752 #define MSC_CNT (MSC_MAX+1) 753 754 /* 755 * LEDs 756 */ 757 758 #define LED_NUML 0x00 759 #define LED_CAPSL 0x01 760 #define LED_SCROLLL 0x02 761 #define LED_COMPOSE 0x03 762 #define LED_KANA 0x04 763 #define LED_SLEEP 0x05 764 #define LED_SUSPEND 0x06 765 #define LED_MUTE 0x07 766 #define LED_MISC 0x08 767 #define LED_MAIL 0x09 768 #define LED_CHARGING 0x0a 769 #define LED_MAX 0x0f 770 #define LED_CNT (LED_MAX+1) 771 772 /* 773 * Autorepeat values 774 */ 775 776 #define REP_DELAY 0x00 777 #define REP_PERIOD 0x01 778 #define REP_MAX 0x01 779 #define REP_CNT (REP_MAX+1) 780 781 /* 782 * Sounds 783 */ 784 785 #define SND_CLICK 0x00 786 #define SND_BELL 0x01 787 #define SND_TONE 0x02 788 #define SND_MAX 0x07 789 #define SND_CNT (SND_MAX+1) 790 791 /* 792 * IDs. 793 */ 794 795 #define ID_BUS 0 796 #define ID_VENDOR 1 797 #define ID_PRODUCT 2 798 #define ID_VERSION 3 799 800 #define BUS_PCI 0x01 801 #define BUS_ISAPNP 0x02 802 #define BUS_USB 0x03 803 #define BUS_HIL 0x04 804 #define BUS_BLUETOOTH 0x05 805 #define BUS_VIRTUAL 0x06 806 807 #define BUS_ISA 0x10 808 #define BUS_I8042 0x11 809 #define BUS_XTKBD 0x12 810 #define BUS_RS232 0x13 811 #define BUS_GAMEPORT 0x14 812 #define BUS_PARPORT 0x15 813 #define BUS_AMIGA 0x16 814 #define BUS_ADB 0x17 815 #define BUS_I2C 0x18 816 #define BUS_HOST 0x19 817 #define BUS_GSC 0x1A 818 #define BUS_ATARI 0x1B 819 #define BUS_SPI 0x1C 820 821 /* 822 * MT_TOOL types 823 */ 824 #define MT_TOOL_FINGER 0 825 #define MT_TOOL_PEN 1 826 827 /* 828 * Values describing the status of a force-feedback effect 829 */ 830 #define FF_STATUS_STOPPED 0x00 831 #define FF_STATUS_PLAYING 0x01 832 #define FF_STATUS_MAX 0x01 833 834 /* 835 * Structures used in ioctls to upload effects to a device 836 * They are pieces of a bigger structure (called ff_effect) 837 */ 838 839 /* 840 * All duration values are expressed in ms. Values above 32767 ms (0x7fff) 841 * should not be used and have unspecified results. 842 */ 843 844 /** 845 * struct ff_replay - defines scheduling of the force-feedback effect 846 * @length: duration of the effect 847 * @delay: delay before effect should start playing 848 */ 849 struct ff_replay { 850 __u16 length; 851 __u16 delay; 852 }; 853 854 /** 855 * struct ff_trigger - defines what triggers the force-feedback effect 856 * @button: number of the button triggering the effect 857 * @interval: controls how soon the effect can be re-triggered 858 */ 859 struct ff_trigger { 860 __u16 button; 861 __u16 interval; 862 }; 863 864 /** 865 * struct ff_envelope - generic force-feedback effect envelope 866 * @attack_length: duration of the attack (ms) 867 * @attack_level: level at the beginning of the attack 868 * @fade_length: duration of fade (ms) 869 * @fade_level: level at the end of fade 870 * 871 * The @attack_level and @fade_level are absolute values; when applying 872 * envelope force-feedback core will convert to positive/negative 873 * value based on polarity of the default level of the effect. 874 * Valid range for the attack and fade levels is 0x0000 - 0x7fff 875 */ 876 struct ff_envelope { 877 __u16 attack_length; 878 __u16 attack_level; 879 __u16 fade_length; 880 __u16 fade_level; 881 }; 882 883 /** 884 * struct ff_constant_effect - defines parameters of a constant force-feedback effect 885 * @level: strength of the effect; may be negative 886 * @envelope: envelope data 887 */ 888 struct ff_constant_effect { 889 __s16 level; 890 struct ff_envelope envelope; 891 }; 892 893 /** 894 * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect 895 * @start_level: beginning strength of the effect; may be negative 896 * @end_level: final strength of the effect; may be negative 897 * @envelope: envelope data 898 */ 899 struct ff_ramp_effect { 900 __s16 start_level; 901 __s16 end_level; 902 struct ff_envelope envelope; 903 }; 904 905 /** 906 * struct ff_condition_effect - defines a spring or friction force-feedback effect 907 * @right_saturation: maximum level when joystick moved all way to the right 908 * @left_saturation: same for the left side 909 * @right_coeff: controls how fast the force grows when the joystick moves 910 * to the right 911 * @left_coeff: same for the left side 912 * @deadband: size of the dead zone, where no force is produced 913 * @center: position of the dead zone 914 */ 915 struct ff_condition_effect { 916 __u16 right_saturation; 917 __u16 left_saturation; 918 919 __s16 right_coeff; 920 __s16 left_coeff; 921 922 __u16 deadband; 923 __s16 center; 924 }; 925 926 /** 927 * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect 928 * @waveform: kind of the effect (wave) 929 * @period: period of the wave (ms) 930 * @magnitude: peak value 931 * @offset: mean value of the wave (roughly) 932 * @phase: 'horizontal' shift 933 * @envelope: envelope data 934 * @custom_len: number of samples (FF_CUSTOM only) 935 * @custom_data: buffer of samples (FF_CUSTOM only) 936 * 937 * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, 938 * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined 939 * for the time being as no driver supports it yet. 940 * 941 * Note: the data pointed by custom_data is copied by the driver. 942 * You can therefore dispose of the memory after the upload/update. 943 */ 944 struct ff_periodic_effect { 945 __u16 waveform; 946 __u16 period; 947 __s16 magnitude; 948 __s16 offset; 949 __u16 phase; 950 951 struct ff_envelope envelope; 952 953 __u32 custom_len; 954 __s16 __user *custom_data; 955 }; 956 957 /** 958 * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect 959 * @strong_magnitude: magnitude of the heavy motor 960 * @weak_magnitude: magnitude of the light one 961 * 962 * Some rumble pads have two motors of different weight. Strong_magnitude 963 * represents the magnitude of the vibration generated by the heavy one. 964 */ 965 struct ff_rumble_effect { 966 __u16 strong_magnitude; 967 __u16 weak_magnitude; 968 }; 969 970 /** 971 * struct ff_effect - defines force feedback effect 972 * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, 973 * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) 974 * @id: an unique id assigned to an effect 975 * @direction: direction of the effect 976 * @trigger: trigger conditions (struct ff_trigger) 977 * @replay: scheduling of the effect (struct ff_replay) 978 * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, 979 * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further 980 * defining effect parameters 981 * 982 * This structure is sent through ioctl from the application to the driver. 983 * To create a new effect application should set its @id to -1; the kernel 984 * will return assigned @id which can later be used to update or delete 985 * this effect. 986 * 987 * Direction of the effect is encoded as follows: 988 * 0 deg -> 0x0000 (down) 989 * 90 deg -> 0x4000 (left) 990 * 180 deg -> 0x8000 (up) 991 * 270 deg -> 0xC000 (right) 992 */ 993 struct ff_effect { 994 __u16 type; 995 __s16 id; 996 __u16 direction; 997 struct ff_trigger trigger; 998 struct ff_replay replay; 999 1000 union { 1001 struct ff_constant_effect constant; 1002 struct ff_ramp_effect ramp; 1003 struct ff_periodic_effect periodic; 1004 struct ff_condition_effect condition[2]; /* One for each axis */ 1005 struct ff_rumble_effect rumble; 1006 } u; 1007 }; 1008 1009 /* 1010 * Force feedback effect types 1011 */ 1012 1013 #define FF_RUMBLE 0x50 1014 #define FF_PERIODIC 0x51 1015 #define FF_CONSTANT 0x52 1016 #define FF_SPRING 0x53 1017 #define FF_FRICTION 0x54 1018 #define FF_DAMPER 0x55 1019 #define FF_INERTIA 0x56 1020 #define FF_RAMP 0x57 1021 1022 #define FF_EFFECT_MIN FF_RUMBLE 1023 #define FF_EFFECT_MAX FF_RAMP 1024 1025 /* 1026 * Force feedback periodic effect types 1027 */ 1028 1029 #define FF_SQUARE 0x58 1030 #define FF_TRIANGLE 0x59 1031 #define FF_SINE 0x5a 1032 #define FF_SAW_UP 0x5b 1033 #define FF_SAW_DOWN 0x5c 1034 #define FF_CUSTOM 0x5d 1035 1036 #define FF_WAVEFORM_MIN FF_SQUARE 1037 #define FF_WAVEFORM_MAX FF_CUSTOM 1038 1039 /* 1040 * Set ff device properties 1041 */ 1042 1043 #define FF_GAIN 0x60 1044 #define FF_AUTOCENTER 0x61 1045 1046 #define FF_MAX 0x7f 1047 #define FF_CNT (FF_MAX+1) 1048 1049 #ifdef __KERNEL__ 1050 1051 /* 1052 * In-kernel definitions. 1053 */ 1054 1055 #include <linux/device.h> 1056 #include <linux/fs.h> 1057 #include <linux/timer.h> 1058 #include <linux/mod_devicetable.h> 1059 1060 /** 1061 * struct input_mt_slot - represents the state of an input MT slot 1062 * @abs: holds current values of ABS_MT axes for this slot 1063 */ 1064 struct input_mt_slot { 1065 int abs[ABS_MT_LAST - ABS_MT_FIRST + 1]; 1066 }; 1067 1068 /** 1069 * struct input_dev - represents an input device 1070 * @name: name of the device 1071 * @phys: physical path to the device in the system hierarchy 1072 * @uniq: unique identification code for the device (if device has it) 1073 * @id: id of the device (struct input_id) 1074 * @evbit: bitmap of types of events supported by the device (EV_KEY, 1075 * EV_REL, etc.) 1076 * @keybit: bitmap of keys/buttons this device has 1077 * @relbit: bitmap of relative axes for the device 1078 * @absbit: bitmap of absolute axes for the device 1079 * @mscbit: bitmap of miscellaneous events supported by the device 1080 * @ledbit: bitmap of leds present on the device 1081 * @sndbit: bitmap of sound effects supported by the device 1082 * @ffbit: bitmap of force feedback effects supported by the device 1083 * @swbit: bitmap of switches present on the device 1084 * @hint_events_per_packet: average number of events generated by the 1085 * device in a packet (between EV_SYN/SYN_REPORT events). Used by 1086 * event handlers to estimate size of the buffer needed to hold 1087 * events. 1088 * @keycodemax: size of keycode table 1089 * @keycodesize: size of elements in keycode table 1090 * @keycode: map of scancodes to keycodes for this device 1091 * @setkeycode: optional method to alter current keymap, used to implement 1092 * sparse keymaps. If not supplied default mechanism will be used. 1093 * The method is being called while holding event_lock and thus must 1094 * not sleep 1095 * @getkeycode: optional method to retrieve current keymap. If not supplied 1096 * default mechanism will be used. The method is being called while 1097 * holding event_lock and thus must not sleep 1098 * @ff: force feedback structure associated with the device if device 1099 * supports force feedback effects 1100 * @repeat_key: stores key code of the last key pressed; used to implement 1101 * software autorepeat 1102 * @timer: timer for software autorepeat 1103 * @rep: current values for autorepeat parameters (delay, rate) 1104 * @mt: pointer to array of struct input_mt_slot holding current values 1105 * of tracked contacts 1106 * @mtsize: number of MT slots the device uses 1107 * @slot: MT slot currently being transmitted 1108 * @absinfo: array of &struct absinfo elements holding information 1109 * about absolute axes (current value, min, max, flat, fuzz, 1110 * resolution) 1111 * @key: reflects current state of device's keys/buttons 1112 * @led: reflects current state of device's LEDs 1113 * @snd: reflects current state of sound effects 1114 * @sw: reflects current state of device's switches 1115 * @open: this method is called when the very first user calls 1116 * input_open_device(). The driver must prepare the device 1117 * to start generating events (start polling thread, 1118 * request an IRQ, submit URB, etc.) 1119 * @close: this method is called when the very last user calls 1120 * input_close_device(). 1121 * @flush: purges the device. Most commonly used to get rid of force 1122 * feedback effects loaded into the device when disconnecting 1123 * from it 1124 * @event: event handler for events sent _to_ the device, like EV_LED 1125 * or EV_SND. The device is expected to carry out the requested 1126 * action (turn on a LED, play sound, etc.) The call is protected 1127 * by @event_lock and must not sleep 1128 * @grab: input handle that currently has the device grabbed (via 1129 * EVIOCGRAB ioctl). When a handle grabs a device it becomes sole 1130 * recipient for all input events coming from the device 1131 * @event_lock: this spinlock is is taken when input core receives 1132 * and processes a new event for the device (in input_event()). 1133 * Code that accesses and/or modifies parameters of a device 1134 * (such as keymap or absmin, absmax, absfuzz, etc.) after device 1135 * has been registered with input core must take this lock. 1136 * @mutex: serializes calls to open(), close() and flush() methods 1137 * @users: stores number of users (input handlers) that opened this 1138 * device. It is used by input_open_device() and input_close_device() 1139 * to make sure that dev->open() is only called when the first 1140 * user opens device and dev->close() is called when the very 1141 * last user closes the device 1142 * @going_away: marks devices that are in a middle of unregistering and 1143 * causes input_open_device*() fail with -ENODEV. 1144 * @sync: set to %true when there were no new events since last EV_SYN 1145 * @dev: driver model's view of this device 1146 * @h_list: list of input handles associated with the device. When 1147 * accessing the list dev->mutex must be held 1148 * @node: used to place the device onto input_dev_list 1149 */ 1150 struct input_dev { 1151 const char *name; 1152 const char *phys; 1153 const char *uniq; 1154 struct input_id id; 1155 1156 unsigned long evbit[BITS_TO_LONGS(EV_CNT)]; 1157 unsigned long keybit[BITS_TO_LONGS(KEY_CNT)]; 1158 unsigned long relbit[BITS_TO_LONGS(REL_CNT)]; 1159 unsigned long absbit[BITS_TO_LONGS(ABS_CNT)]; 1160 unsigned long mscbit[BITS_TO_LONGS(MSC_CNT)]; 1161 unsigned long ledbit[BITS_TO_LONGS(LED_CNT)]; 1162 unsigned long sndbit[BITS_TO_LONGS(SND_CNT)]; 1163 unsigned long ffbit[BITS_TO_LONGS(FF_CNT)]; 1164 unsigned long swbit[BITS_TO_LONGS(SW_CNT)]; 1165 1166 unsigned int hint_events_per_packet; 1167 1168 unsigned int keycodemax; 1169 unsigned int keycodesize; 1170 void *keycode; 1171 int (*setkeycode)(struct input_dev *dev, 1172 unsigned int scancode, unsigned int keycode); 1173 int (*getkeycode)(struct input_dev *dev, 1174 unsigned int scancode, unsigned int *keycode); 1175 1176 struct ff_device *ff; 1177 1178 unsigned int repeat_key; 1179 struct timer_list timer; 1180 1181 int rep[REP_CNT]; 1182 1183 struct input_mt_slot *mt; 1184 int mtsize; 1185 int slot; 1186 1187 struct input_absinfo *absinfo; 1188 1189 unsigned long key[BITS_TO_LONGS(KEY_CNT)]; 1190 unsigned long led[BITS_TO_LONGS(LED_CNT)]; 1191 unsigned long snd[BITS_TO_LONGS(SND_CNT)]; 1192 unsigned long sw[BITS_TO_LONGS(SW_CNT)]; 1193 1194 int (*open)(struct input_dev *dev); 1195 void (*close)(struct input_dev *dev); 1196 int (*flush)(struct input_dev *dev, struct file *file); 1197 int (*event)(struct input_dev *dev, unsigned int type, unsigned int code, int value); 1198 1199 struct input_handle __rcu *grab; 1200 1201 spinlock_t event_lock; 1202 struct mutex mutex; 1203 1204 unsigned int users; 1205 bool going_away; 1206 1207 bool sync; 1208 1209 struct device dev; 1210 1211 struct list_head h_list; 1212 struct list_head node; 1213 }; 1214 #define to_input_dev(d) container_of(d, struct input_dev, dev) 1215 1216 /* 1217 * Verify that we are in sync with input_device_id mod_devicetable.h #defines 1218 */ 1219 1220 #if EV_MAX != INPUT_DEVICE_ID_EV_MAX 1221 #error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match" 1222 #endif 1223 1224 #if KEY_MIN_INTERESTING != INPUT_DEVICE_ID_KEY_MIN_INTERESTING 1225 #error "KEY_MIN_INTERESTING and INPUT_DEVICE_ID_KEY_MIN_INTERESTING do not match" 1226 #endif 1227 1228 #if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX 1229 #error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match" 1230 #endif 1231 1232 #if REL_MAX != INPUT_DEVICE_ID_REL_MAX 1233 #error "REL_MAX and INPUT_DEVICE_ID_REL_MAX do not match" 1234 #endif 1235 1236 #if ABS_MAX != INPUT_DEVICE_ID_ABS_MAX 1237 #error "ABS_MAX and INPUT_DEVICE_ID_ABS_MAX do not match" 1238 #endif 1239 1240 #if MSC_MAX != INPUT_DEVICE_ID_MSC_MAX 1241 #error "MSC_MAX and INPUT_DEVICE_ID_MSC_MAX do not match" 1242 #endif 1243 1244 #if LED_MAX != INPUT_DEVICE_ID_LED_MAX 1245 #error "LED_MAX and INPUT_DEVICE_ID_LED_MAX do not match" 1246 #endif 1247 1248 #if SND_MAX != INPUT_DEVICE_ID_SND_MAX 1249 #error "SND_MAX and INPUT_DEVICE_ID_SND_MAX do not match" 1250 #endif 1251 1252 #if FF_MAX != INPUT_DEVICE_ID_FF_MAX 1253 #error "FF_MAX and INPUT_DEVICE_ID_FF_MAX do not match" 1254 #endif 1255 1256 #if SW_MAX != INPUT_DEVICE_ID_SW_MAX 1257 #error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match" 1258 #endif 1259 1260 #define INPUT_DEVICE_ID_MATCH_DEVICE \ 1261 (INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT) 1262 #define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \ 1263 (INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION) 1264 1265 struct input_handle; 1266 1267 /** 1268 * struct input_handler - implements one of interfaces for input devices 1269 * @private: driver-specific data 1270 * @event: event handler. This method is being called by input core with 1271 * interrupts disabled and dev->event_lock spinlock held and so 1272 * it may not sleep 1273 * @filter: similar to @event; separates normal event handlers from 1274 * "filters". 1275 * @match: called after comparing device's id with handler's id_table 1276 * to perform fine-grained matching between device and handler 1277 * @connect: called when attaching a handler to an input device 1278 * @disconnect: disconnects a handler from input device 1279 * @start: starts handler for given handle. This function is called by 1280 * input core right after connect() method and also when a process 1281 * that "grabbed" a device releases it 1282 * @fops: file operations this driver implements 1283 * @minor: beginning of range of 32 minors for devices this driver 1284 * can provide 1285 * @name: name of the handler, to be shown in /proc/bus/input/handlers 1286 * @id_table: pointer to a table of input_device_ids this driver can 1287 * handle 1288 * @h_list: list of input handles associated with the handler 1289 * @node: for placing the driver onto input_handler_list 1290 * 1291 * Input handlers attach to input devices and create input handles. There 1292 * are likely several handlers attached to any given input device at the 1293 * same time. All of them will get their copy of input event generated by 1294 * the device. 1295 * 1296 * The very same structure is used to implement input filters. Input core 1297 * allows filters to run first and will not pass event to regular handlers 1298 * if any of the filters indicate that the event should be filtered (by 1299 * returning %true from their filter() method). 1300 * 1301 * Note that input core serializes calls to connect() and disconnect() 1302 * methods. 1303 */ 1304 struct input_handler { 1305 1306 void *private; 1307 1308 void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value); 1309 bool (*filter)(struct input_handle *handle, unsigned int type, unsigned int code, int value); 1310 bool (*match)(struct input_handler *handler, struct input_dev *dev); 1311 int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id); 1312 void (*disconnect)(struct input_handle *handle); 1313 void (*start)(struct input_handle *handle); 1314 1315 const struct file_operations *fops; 1316 int minor; 1317 const char *name; 1318 1319 const struct input_device_id *id_table; 1320 1321 struct list_head h_list; 1322 struct list_head node; 1323 }; 1324 1325 /** 1326 * struct input_handle - links input device with an input handler 1327 * @private: handler-specific data 1328 * @open: counter showing whether the handle is 'open', i.e. should deliver 1329 * events from its device 1330 * @name: name given to the handle by handler that created it 1331 * @dev: input device the handle is attached to 1332 * @handler: handler that works with the device through this handle 1333 * @d_node: used to put the handle on device's list of attached handles 1334 * @h_node: used to put the handle on handler's list of handles from which 1335 * it gets events 1336 */ 1337 struct input_handle { 1338 1339 void *private; 1340 1341 int open; 1342 const char *name; 1343 1344 struct input_dev *dev; 1345 struct input_handler *handler; 1346 1347 struct list_head d_node; 1348 struct list_head h_node; 1349 }; 1350 1351 struct input_dev *input_allocate_device(void); 1352 void input_free_device(struct input_dev *dev); 1353 1354 static inline struct input_dev *input_get_device(struct input_dev *dev) 1355 { 1356 return dev ? to_input_dev(get_device(&dev->dev)) : NULL; 1357 } 1358 1359 static inline void input_put_device(struct input_dev *dev) 1360 { 1361 if (dev) 1362 put_device(&dev->dev); 1363 } 1364 1365 static inline void *input_get_drvdata(struct input_dev *dev) 1366 { 1367 return dev_get_drvdata(&dev->dev); 1368 } 1369 1370 static inline void input_set_drvdata(struct input_dev *dev, void *data) 1371 { 1372 dev_set_drvdata(&dev->dev, data); 1373 } 1374 1375 int __must_check input_register_device(struct input_dev *); 1376 void input_unregister_device(struct input_dev *); 1377 1378 int __must_check input_register_handler(struct input_handler *); 1379 void input_unregister_handler(struct input_handler *); 1380 1381 int input_handler_for_each_handle(struct input_handler *, void *data, 1382 int (*fn)(struct input_handle *, void *)); 1383 1384 int input_register_handle(struct input_handle *); 1385 void input_unregister_handle(struct input_handle *); 1386 1387 int input_grab_device(struct input_handle *); 1388 void input_release_device(struct input_handle *); 1389 1390 int input_open_device(struct input_handle *); 1391 void input_close_device(struct input_handle *); 1392 1393 int input_flush_device(struct input_handle* handle, struct file* file); 1394 1395 void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value); 1396 void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value); 1397 1398 static inline void input_report_key(struct input_dev *dev, unsigned int code, int value) 1399 { 1400 input_event(dev, EV_KEY, code, !!value); 1401 } 1402 1403 static inline void input_report_rel(struct input_dev *dev, unsigned int code, int value) 1404 { 1405 input_event(dev, EV_REL, code, value); 1406 } 1407 1408 static inline void input_report_abs(struct input_dev *dev, unsigned int code, int value) 1409 { 1410 input_event(dev, EV_ABS, code, value); 1411 } 1412 1413 static inline void input_report_ff_status(struct input_dev *dev, unsigned int code, int value) 1414 { 1415 input_event(dev, EV_FF_STATUS, code, value); 1416 } 1417 1418 static inline void input_report_switch(struct input_dev *dev, unsigned int code, int value) 1419 { 1420 input_event(dev, EV_SW, code, !!value); 1421 } 1422 1423 static inline void input_sync(struct input_dev *dev) 1424 { 1425 input_event(dev, EV_SYN, SYN_REPORT, 0); 1426 } 1427 1428 static inline void input_mt_sync(struct input_dev *dev) 1429 { 1430 input_event(dev, EV_SYN, SYN_MT_REPORT, 0); 1431 } 1432 1433 static inline void input_mt_slot(struct input_dev *dev, int slot) 1434 { 1435 input_event(dev, EV_ABS, ABS_MT_SLOT, slot); 1436 } 1437 1438 void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code); 1439 1440 /** 1441 * input_set_events_per_packet - tell handlers about the driver event rate 1442 * @dev: the input device used by the driver 1443 * @n_events: the average number of events between calls to input_sync() 1444 * 1445 * If the event rate sent from a device is unusually large, use this 1446 * function to set the expected event rate. This will allow handlers 1447 * to set up an appropriate buffer size for the event stream, in order 1448 * to minimize information loss. 1449 */ 1450 static inline void input_set_events_per_packet(struct input_dev *dev, int n_events) 1451 { 1452 dev->hint_events_per_packet = n_events; 1453 } 1454 1455 void input_alloc_absinfo(struct input_dev *dev); 1456 void input_set_abs_params(struct input_dev *dev, unsigned int axis, 1457 int min, int max, int fuzz, int flat); 1458 1459 #define INPUT_GENERATE_ABS_ACCESSORS(_suffix, _item) \ 1460 static inline int input_abs_get_##_suffix(struct input_dev *dev, \ 1461 unsigned int axis) \ 1462 { \ 1463 return dev->absinfo ? dev->absinfo[axis]._item : 0; \ 1464 } \ 1465 \ 1466 static inline void input_abs_set_##_suffix(struct input_dev *dev, \ 1467 unsigned int axis, int val) \ 1468 { \ 1469 input_alloc_absinfo(dev); \ 1470 if (dev->absinfo) \ 1471 dev->absinfo[axis]._item = val; \ 1472 } 1473 1474 INPUT_GENERATE_ABS_ACCESSORS(val, value) 1475 INPUT_GENERATE_ABS_ACCESSORS(min, minimum) 1476 INPUT_GENERATE_ABS_ACCESSORS(max, maximum) 1477 INPUT_GENERATE_ABS_ACCESSORS(fuzz, fuzz) 1478 INPUT_GENERATE_ABS_ACCESSORS(flat, flat) 1479 INPUT_GENERATE_ABS_ACCESSORS(res, resolution) 1480 1481 int input_get_keycode(struct input_dev *dev, 1482 unsigned int scancode, unsigned int *keycode); 1483 int input_set_keycode(struct input_dev *dev, 1484 unsigned int scancode, unsigned int keycode); 1485 1486 extern struct class input_class; 1487 1488 /** 1489 * struct ff_device - force-feedback part of an input device 1490 * @upload: Called to upload an new effect into device 1491 * @erase: Called to erase an effect from device 1492 * @playback: Called to request device to start playing specified effect 1493 * @set_gain: Called to set specified gain 1494 * @set_autocenter: Called to auto-center device 1495 * @destroy: called by input core when parent input device is being 1496 * destroyed 1497 * @private: driver-specific data, will be freed automatically 1498 * @ffbit: bitmap of force feedback capabilities truly supported by 1499 * device (not emulated like ones in input_dev->ffbit) 1500 * @mutex: mutex for serializing access to the device 1501 * @max_effects: maximum number of effects supported by device 1502 * @effects: pointer to an array of effects currently loaded into device 1503 * @effect_owners: array of effect owners; when file handle owning 1504 * an effect gets closed the effect is automatically erased 1505 * 1506 * Every force-feedback device must implement upload() and playback() 1507 * methods; erase() is optional. set_gain() and set_autocenter() need 1508 * only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER 1509 * bits. 1510 * 1511 * Note that playback(), set_gain() and set_autocenter() are called with 1512 * dev->event_lock spinlock held and interrupts off and thus may not 1513 * sleep. 1514 */ 1515 struct ff_device { 1516 int (*upload)(struct input_dev *dev, struct ff_effect *effect, 1517 struct ff_effect *old); 1518 int (*erase)(struct input_dev *dev, int effect_id); 1519 1520 int (*playback)(struct input_dev *dev, int effect_id, int value); 1521 void (*set_gain)(struct input_dev *dev, u16 gain); 1522 void (*set_autocenter)(struct input_dev *dev, u16 magnitude); 1523 1524 void (*destroy)(struct ff_device *); 1525 1526 void *private; 1527 1528 unsigned long ffbit[BITS_TO_LONGS(FF_CNT)]; 1529 1530 struct mutex mutex; 1531 1532 int max_effects; 1533 struct ff_effect *effects; 1534 struct file *effect_owners[]; 1535 }; 1536 1537 int input_ff_create(struct input_dev *dev, int max_effects); 1538 void input_ff_destroy(struct input_dev *dev); 1539 1540 int input_ff_event(struct input_dev *dev, unsigned int type, unsigned int code, int value); 1541 1542 int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, struct file *file); 1543 int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file); 1544 1545 int input_ff_create_memless(struct input_dev *dev, void *data, 1546 int (*play_effect)(struct input_dev *, void *, struct ff_effect *)); 1547 1548 int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots); 1549 void input_mt_destroy_slots(struct input_dev *dev); 1550 1551 #endif 1552 #endif 1553