1 /* ------------------------------------------------------------------------- */ 2 /* */ 3 /* i2c.h - definitions for the i2c-bus interface */ 4 /* */ 5 /* ------------------------------------------------------------------------- */ 6 /* Copyright (C) 1995-2000 Simon G. Vogl 7 8 This program is free software; you can redistribute it and/or modify 9 it under the terms of the GNU General Public License as published by 10 the Free Software Foundation; either version 2 of the License, or 11 (at your option) any later version. 12 13 This program is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this program; if not, write to the Free Software 20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ 21 /* ------------------------------------------------------------------------- */ 22 23 /* With some changes from Kyösti Mälkki <[email protected]> and 24 Frodo Looijaard <[email protected]> */ 25 26 #ifndef _LINUX_I2C_H 27 #define _LINUX_I2C_H 28 29 #include <linux/types.h> 30 #ifdef __KERNEL__ 31 #include <linux/module.h> 32 #include <linux/i2c-id.h> 33 #include <linux/mod_devicetable.h> 34 #include <linux/device.h> /* for struct device */ 35 #include <linux/sched.h> /* for completion */ 36 #include <linux/mutex.h> 37 38 /* --- General options ------------------------------------------------ */ 39 40 struct i2c_msg; 41 struct i2c_algorithm; 42 struct i2c_adapter; 43 struct i2c_client; 44 struct i2c_driver; 45 union i2c_smbus_data; 46 47 /* 48 * The master routines are the ones normally used to transmit data to devices 49 * on a bus (or read from them). Apart from two basic transfer functions to 50 * transmit one message at a time, a more complex version can be used to 51 * transmit an arbitrary number of messages without interruption. 52 */ 53 extern int i2c_master_send(struct i2c_client *,const char* ,int); 54 extern int i2c_master_recv(struct i2c_client *,char* ,int); 55 56 /* Transfer num messages. 57 */ 58 extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num); 59 60 61 /* This is the very generalized SMBus access routine. You probably do not 62 want to use this, though; one of the functions below may be much easier, 63 and probably just as fast. 64 Note that we use i2c_adapter here, because you do not need a specific 65 smbus adapter to call this function. */ 66 extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, 67 unsigned short flags, 68 char read_write, u8 command, int size, 69 union i2c_smbus_data * data); 70 71 /* Now follow the 'nice' access routines. These also document the calling 72 conventions of smbus_access. */ 73 74 extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); 75 extern s32 i2c_smbus_read_byte(struct i2c_client * client); 76 extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); 77 extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); 78 extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, 79 u8 command, u8 value); 80 extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); 81 extern s32 i2c_smbus_write_word_data(struct i2c_client * client, 82 u8 command, u16 value); 83 /* Returns the number of read bytes */ 84 extern s32 i2c_smbus_read_block_data(struct i2c_client *client, 85 u8 command, u8 *values); 86 extern s32 i2c_smbus_write_block_data(struct i2c_client * client, 87 u8 command, u8 length, 88 const u8 *values); 89 /* Returns the number of read bytes */ 90 extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, 91 u8 command, u8 length, u8 *values); 92 extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, 93 u8 command, u8 length, 94 const u8 *values); 95 96 /* 97 * A driver is capable of handling one or more physical devices present on 98 * I2C adapters. This information is used to inform the driver of adapter 99 * events. 100 * 101 * The driver.owner field should be set to the module owner of this driver. 102 * The driver.name field should be set to the name of this driver. 103 */ 104 105 struct i2c_driver { 106 int id; 107 unsigned int class; 108 109 /* Notifies the driver that a new bus has appeared. This routine 110 * can be used by the driver to test if the bus meets its conditions 111 * & seek for the presence of the chip(s) it supports. If found, it 112 * registers the client(s) that are on the bus to the i2c admin. via 113 * i2c_attach_client. (LEGACY I2C DRIVERS ONLY) 114 */ 115 int (*attach_adapter)(struct i2c_adapter *); 116 int (*detach_adapter)(struct i2c_adapter *); 117 118 /* tells the driver that a client is about to be deleted & gives it 119 * the chance to remove its private data. Also, if the client struct 120 * has been dynamically allocated by the driver in the function above, 121 * it must be freed here. (LEGACY I2C DRIVERS ONLY) 122 */ 123 int (*detach_client)(struct i2c_client *); 124 125 /* Standard driver model interfaces, for "new style" i2c drivers. 126 * With the driver model, device enumeration is NEVER done by drivers; 127 * it's done by infrastructure. (NEW STYLE DRIVERS ONLY) 128 */ 129 int (*probe)(struct i2c_client *, const struct i2c_device_id *); 130 int (*remove)(struct i2c_client *); 131 132 /* driver model interfaces that don't relate to enumeration */ 133 void (*shutdown)(struct i2c_client *); 134 int (*suspend)(struct i2c_client *, pm_message_t mesg); 135 int (*resume)(struct i2c_client *); 136 137 /* a ioctl like command that can be used to perform specific functions 138 * with the device. 139 */ 140 int (*command)(struct i2c_client *client,unsigned int cmd, void *arg); 141 142 struct device_driver driver; 143 const struct i2c_device_id *id_table; 144 }; 145 #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver) 146 147 /** 148 * struct i2c_client - represent an I2C slave device 149 * @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address; 150 * I2C_CLIENT_PEC indicates it uses SMBus Packet Error Checking 151 * @addr: Address used on the I2C bus connected to the parent adapter. 152 * @name: Indicates the type of the device, usually a chip name that's 153 * generic enough to hide second-sourcing and compatible revisions. 154 * @adapter: manages the bus segment hosting this I2C device 155 * @driver: device's driver, hence pointer to access routines 156 * @dev: Driver model device node for the slave. 157 * @irq: indicates the IRQ generated by this device (if any) 158 * @driver_name: Identifies new-style driver used with this device; also 159 * used as the module name for hotplug/coldplug modprobe support. 160 * @list: list of active/busy clients (DEPRECATED) 161 * @released: used to synchronize client releases & detaches and references 162 * 163 * An i2c_client identifies a single device (i.e. chip) connected to an 164 * i2c bus. The behaviour exposed to Linux is defined by the driver 165 * managing the device. 166 */ 167 struct i2c_client { 168 unsigned short flags; /* div., see below */ 169 unsigned short addr; /* chip address - NOTE: 7bit */ 170 /* addresses are stored in the */ 171 /* _LOWER_ 7 bits */ 172 char name[I2C_NAME_SIZE]; 173 struct i2c_adapter *adapter; /* the adapter we sit on */ 174 struct i2c_driver *driver; /* and our access routines */ 175 struct device dev; /* the device structure */ 176 int irq; /* irq issued by device (or -1) */ 177 char driver_name[KOBJ_NAME_LEN]; 178 struct list_head list; /* DEPRECATED */ 179 struct completion released; 180 }; 181 #define to_i2c_client(d) container_of(d, struct i2c_client, dev) 182 183 extern struct i2c_client *i2c_verify_client(struct device *dev); 184 185 static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj) 186 { 187 struct device * const dev = container_of(kobj, struct device, kobj); 188 return to_i2c_client(dev); 189 } 190 191 static inline void *i2c_get_clientdata (struct i2c_client *dev) 192 { 193 return dev_get_drvdata (&dev->dev); 194 } 195 196 static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) 197 { 198 dev_set_drvdata (&dev->dev, data); 199 } 200 201 /** 202 * struct i2c_board_info - template for device creation 203 * @driver_name: identifies the driver to be bound to the device 204 * @type: optional chip type information, to initialize i2c_client.name 205 * @flags: to initialize i2c_client.flags 206 * @addr: stored in i2c_client.addr 207 * @platform_data: stored in i2c_client.dev.platform_data 208 * @irq: stored in i2c_client.irq 209 * 210 * I2C doesn't actually support hardware probing, although controllers and 211 * devices may be able to use I2C_SMBUS_QUICK to tell whether or not there's 212 * a device at a given address. Drivers commonly need more information than 213 * that, such as chip type, configuration, associated IRQ, and so on. 214 * 215 * i2c_board_info is used to build tables of information listing I2C devices 216 * that are present. This information is used to grow the driver model tree 217 * for "new style" I2C drivers. For mainboards this is done statically using 218 * i2c_register_board_info(); bus numbers identify adapters that aren't 219 * yet available. For add-on boards, i2c_new_device() does this dynamically 220 * with the adapter already known. 221 */ 222 struct i2c_board_info { 223 char driver_name[KOBJ_NAME_LEN]; 224 char type[I2C_NAME_SIZE]; 225 unsigned short flags; 226 unsigned short addr; 227 void *platform_data; 228 int irq; 229 }; 230 231 /** 232 * I2C_BOARD_INFO - macro used to list an i2c device and its address 233 * @dev_type: identifies the device type 234 * @dev_addr: the device's address on the bus. 235 * 236 * This macro initializes essential fields of a struct i2c_board_info, 237 * declaring what has been provided on a particular board. Optional 238 * fields (such as associated irq, or device-specific platform_data) 239 * are provided using conventional syntax. 240 */ 241 #define I2C_BOARD_INFO(dev_type,dev_addr) \ 242 .type = (dev_type), .addr = (dev_addr) 243 244 245 /* Add-on boards should register/unregister their devices; e.g. a board 246 * with integrated I2C, a config eeprom, sensors, and a codec that's 247 * used in conjunction with the primary hardware. 248 */ 249 extern struct i2c_client * 250 i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info); 251 252 /* If you don't know the exact address of an I2C device, use this variant 253 * instead, which can probe for device presence in a list of possible 254 * addresses. 255 */ 256 extern struct i2c_client * 257 i2c_new_probed_device(struct i2c_adapter *adap, 258 struct i2c_board_info *info, 259 unsigned short const *addr_list); 260 261 /* For devices that use several addresses, use i2c_new_dummy() to make 262 * client handles for the extra addresses. 263 */ 264 extern struct i2c_client * 265 i2c_new_dummy(struct i2c_adapter *adap, u16 address, const char *type); 266 267 extern void i2c_unregister_device(struct i2c_client *); 268 269 /* Mainboard arch_initcall() code should register all its I2C devices. 270 * This is done at arch_initcall time, before declaring any i2c adapters. 271 * Modules for add-on boards must use other calls. 272 */ 273 #ifdef CONFIG_I2C_BOARDINFO 274 extern int 275 i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n); 276 #else 277 static inline int 278 i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n) 279 { 280 return 0; 281 } 282 #endif 283 284 /* 285 * The following structs are for those who like to implement new bus drivers: 286 * i2c_algorithm is the interface to a class of hardware solutions which can 287 * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584 288 * to name two of the most common. 289 */ 290 struct i2c_algorithm { 291 /* If an adapter algorithm can't do I2C-level access, set master_xfer 292 to NULL. If an adapter algorithm can do SMBus access, set 293 smbus_xfer. If set to NULL, the SMBus protocol is simulated 294 using common I2C messages */ 295 /* master_xfer should return the number of messages successfully 296 processed, or a negative value on error */ 297 int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, 298 int num); 299 int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, 300 unsigned short flags, char read_write, 301 u8 command, int size, union i2c_smbus_data * data); 302 303 /* To determine what the adapter supports */ 304 u32 (*functionality) (struct i2c_adapter *); 305 }; 306 307 /* 308 * i2c_adapter is the structure used to identify a physical i2c bus along 309 * with the access algorithms necessary to access it. 310 */ 311 struct i2c_adapter { 312 struct module *owner; 313 unsigned int id; 314 unsigned int class; 315 const struct i2c_algorithm *algo; /* the algorithm to access the bus */ 316 void *algo_data; 317 318 /* --- administration stuff. */ 319 int (*client_register)(struct i2c_client *); 320 int (*client_unregister)(struct i2c_client *); 321 322 /* data fields that are valid for all devices */ 323 u8 level; /* nesting level for lockdep */ 324 struct mutex bus_lock; 325 struct mutex clist_lock; 326 327 int timeout; 328 int retries; 329 struct device dev; /* the adapter device */ 330 331 int nr; 332 struct list_head clients; /* DEPRECATED */ 333 char name[48]; 334 struct completion dev_released; 335 }; 336 #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev) 337 338 static inline void *i2c_get_adapdata (struct i2c_adapter *dev) 339 { 340 return dev_get_drvdata (&dev->dev); 341 } 342 343 static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data) 344 { 345 dev_set_drvdata (&dev->dev, data); 346 } 347 348 /*flags for the client struct: */ 349 #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ 350 #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ 351 /* Must equal I2C_M_TEN below */ 352 #define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */ 353 354 /* i2c adapter classes (bitmask) */ 355 #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */ 356 #define I2C_CLASS_TV_ANALOG (1<<1) /* bttv + friends */ 357 #define I2C_CLASS_TV_DIGITAL (1<<2) /* dvb cards */ 358 #define I2C_CLASS_DDC (1<<3) /* i2c-matroxfb ? */ 359 #define I2C_CLASS_CAM_ANALOG (1<<4) /* camera with analog CCD */ 360 #define I2C_CLASS_CAM_DIGITAL (1<<5) /* most webcams */ 361 #define I2C_CLASS_SOUND (1<<6) /* sound devices */ 362 #define I2C_CLASS_ALL (UINT_MAX) /* all of the above */ 363 364 /* i2c_client_address_data is the struct for holding default client 365 * addresses for a driver and for the parameters supplied on the 366 * command line 367 */ 368 struct i2c_client_address_data { 369 const unsigned short *normal_i2c; 370 const unsigned short *probe; 371 const unsigned short *ignore; 372 const unsigned short * const *forces; 373 }; 374 375 /* Internal numbers to terminate lists */ 376 #define I2C_CLIENT_END 0xfffeU 377 378 /* The numbers to use to set I2C bus address */ 379 #define ANY_I2C_BUS 0xffff 380 381 382 /* ----- functions exported by i2c.o */ 383 384 /* administration... 385 */ 386 extern int i2c_add_adapter(struct i2c_adapter *); 387 extern int i2c_del_adapter(struct i2c_adapter *); 388 extern int i2c_add_numbered_adapter(struct i2c_adapter *); 389 390 extern int i2c_register_driver(struct module *, struct i2c_driver *); 391 extern void i2c_del_driver(struct i2c_driver *); 392 393 static inline int i2c_add_driver(struct i2c_driver *driver) 394 { 395 return i2c_register_driver(THIS_MODULE, driver); 396 } 397 398 extern int i2c_attach_client(struct i2c_client *); 399 extern int i2c_detach_client(struct i2c_client *); 400 401 extern struct i2c_client *i2c_use_client(struct i2c_client *client); 402 extern void i2c_release_client(struct i2c_client *client); 403 404 /* call the i2c_client->command() of all attached clients with 405 * the given arguments */ 406 extern void i2c_clients_command(struct i2c_adapter *adap, 407 unsigned int cmd, void *arg); 408 409 /* Detect function. It iterates over all possible addresses itself. 410 * It will only call found_proc if some client is connected at the 411 * specific address (unless a 'force' matched); 412 */ 413 extern int i2c_probe(struct i2c_adapter *adapter, 414 const struct i2c_client_address_data *address_data, 415 int (*found_proc) (struct i2c_adapter *, int, int)); 416 417 extern struct i2c_adapter* i2c_get_adapter(int id); 418 extern void i2c_put_adapter(struct i2c_adapter *adap); 419 420 421 /* Return the functionality mask */ 422 static inline u32 i2c_get_functionality(struct i2c_adapter *adap) 423 { 424 return adap->algo->functionality(adap); 425 } 426 427 /* Return 1 if adapter supports everything we need, 0 if not. */ 428 static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func) 429 { 430 return (func & i2c_get_functionality(adap)) == func; 431 } 432 433 /* Return id number for a specific adapter */ 434 static inline int i2c_adapter_id(struct i2c_adapter *adap) 435 { 436 return adap->nr; 437 } 438 #endif /* __KERNEL__ */ 439 440 /** 441 * struct i2c_msg - an I2C transaction segment beginning with START 442 * @addr: Slave address, either seven or ten bits. When this is a ten 443 * bit address, I2C_M_TEN must be set in @flags and the adapter 444 * must support I2C_FUNC_10BIT_ADDR. 445 * @flags: I2C_M_RD is handled by all adapters. No other flags may be 446 * provided unless the adapter exported the relevant I2C_FUNC_* 447 * flags through i2c_check_functionality(). 448 * @len: Number of data bytes in @buf being read from or written to the 449 * I2C slave address. For read transactions where I2C_M_RECV_LEN 450 * is set, the caller guarantees that this buffer can hold up to 451 * 32 bytes in addition to the initial length byte sent by the 452 * slave (plus, if used, the SMBus PEC); and this value will be 453 * incremented by the number of block data bytes received. 454 * @buf: The buffer into which data is read, or from which it's written. 455 * 456 * An i2c_msg is the low level representation of one segment of an I2C 457 * transaction. It is visible to drivers in the @i2c_transfer() procedure, 458 * to userspace from i2c-dev, and to I2C adapter drivers through the 459 * @i2c_adapter.@master_xfer() method. 460 * 461 * Except when I2C "protocol mangling" is used, all I2C adapters implement 462 * the standard rules for I2C transactions. Each transaction begins with a 463 * START. That is followed by the slave address, and a bit encoding read 464 * versus write. Then follow all the data bytes, possibly including a byte 465 * with SMBus PEC. The transfer terminates with a NAK, or when all those 466 * bytes have been transferred and ACKed. If this is the last message in a 467 * group, it is followed by a STOP. Otherwise it is followed by the next 468 * @i2c_msg transaction segment, beginning with a (repeated) START. 469 * 470 * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then 471 * passing certain @flags may have changed those standard protocol behaviors. 472 * Those flags are only for use with broken/nonconforming slaves, and with 473 * adapters which are known to support the specific mangling options they 474 * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR). 475 */ 476 struct i2c_msg { 477 __u16 addr; /* slave address */ 478 __u16 flags; 479 #define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ 480 #define I2C_M_RD 0x0001 /* read data, from slave to master */ 481 #define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */ 482 #define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ 483 #define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ 484 #define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ 485 #define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ 486 __u16 len; /* msg length */ 487 __u8 *buf; /* pointer to msg data */ 488 }; 489 490 /* To determine what functionality is present */ 491 492 #define I2C_FUNC_I2C 0x00000001 493 #define I2C_FUNC_10BIT_ADDR 0x00000002 494 #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ 495 #define I2C_FUNC_SMBUS_PEC 0x00000008 496 #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ 497 #define I2C_FUNC_SMBUS_QUICK 0x00010000 498 #define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 499 #define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 500 #define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 501 #define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 502 #define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 503 #define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 504 #define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 505 #define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 506 #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 507 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ 508 #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ 509 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ 510 #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */ 511 512 #define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ 513 I2C_FUNC_SMBUS_WRITE_BYTE) 514 #define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ 515 I2C_FUNC_SMBUS_WRITE_BYTE_DATA) 516 #define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ 517 I2C_FUNC_SMBUS_WRITE_WORD_DATA) 518 #define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ 519 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) 520 #define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ 521 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) 522 #define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \ 523 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2) 524 525 #define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ 526 I2C_FUNC_SMBUS_BYTE | \ 527 I2C_FUNC_SMBUS_BYTE_DATA | \ 528 I2C_FUNC_SMBUS_WORD_DATA | \ 529 I2C_FUNC_SMBUS_PROC_CALL | \ 530 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ 531 I2C_FUNC_SMBUS_I2C_BLOCK | \ 532 I2C_FUNC_SMBUS_PEC) 533 534 /* 535 * Data for SMBus Messages 536 */ 537 #define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ 538 union i2c_smbus_data { 539 __u8 byte; 540 __u16 word; 541 __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ 542 /* and one more for user-space compatibility */ 543 }; 544 545 /* smbus_access read or write markers */ 546 #define I2C_SMBUS_READ 1 547 #define I2C_SMBUS_WRITE 0 548 549 /* SMBus transaction types (size parameter in the above functions) 550 Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ 551 #define I2C_SMBUS_QUICK 0 552 #define I2C_SMBUS_BYTE 1 553 #define I2C_SMBUS_BYTE_DATA 2 554 #define I2C_SMBUS_WORD_DATA 3 555 #define I2C_SMBUS_PROC_CALL 4 556 #define I2C_SMBUS_BLOCK_DATA 5 557 #define I2C_SMBUS_I2C_BLOCK_BROKEN 6 558 #define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ 559 #define I2C_SMBUS_I2C_BLOCK_DATA 8 560 561 562 #ifdef __KERNEL__ 563 564 /* These defines are used for probing i2c client addresses */ 565 /* The length of the option lists */ 566 #define I2C_CLIENT_MAX_OPTS 48 567 568 /* Default fill of many variables */ 569 #define I2C_CLIENT_DEFAULTS {I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 570 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 571 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 572 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 573 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 574 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 575 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 576 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 577 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 578 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 579 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 580 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 581 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 582 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 583 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ 584 I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END} 585 586 /* I2C_CLIENT_MODULE_PARM creates a module parameter, and puts it in the 587 module header */ 588 589 #define I2C_CLIENT_MODULE_PARM(var,desc) \ 590 static unsigned short var[I2C_CLIENT_MAX_OPTS] = I2C_CLIENT_DEFAULTS; \ 591 static unsigned int var##_num; \ 592 module_param_array(var, short, &var##_num, 0); \ 593 MODULE_PARM_DESC(var,desc) 594 595 #define I2C_CLIENT_MODULE_PARM_FORCE(name) \ 596 I2C_CLIENT_MODULE_PARM(force_##name, \ 597 "List of adapter,address pairs which are " \ 598 "unquestionably assumed to contain a `" \ 599 # name "' chip") 600 601 602 #define I2C_CLIENT_INSMOD_COMMON \ 603 I2C_CLIENT_MODULE_PARM(probe, "List of adapter,address pairs to scan " \ 604 "additionally"); \ 605 I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to " \ 606 "scan"); \ 607 static const struct i2c_client_address_data addr_data = { \ 608 .normal_i2c = normal_i2c, \ 609 .probe = probe, \ 610 .ignore = ignore, \ 611 .forces = forces, \ 612 } 613 614 #define I2C_CLIENT_FORCE_TEXT \ 615 "List of adapter,address pairs to boldly assume to be present" 616 617 /* These are the ones you want to use in your own drivers. Pick the one 618 which matches the number of devices the driver differenciates between. */ 619 #define I2C_CLIENT_INSMOD \ 620 I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ 621 static const unsigned short * const forces[] = { force, NULL }; \ 622 I2C_CLIENT_INSMOD_COMMON 623 624 #define I2C_CLIENT_INSMOD_1(chip1) \ 625 enum chips { any_chip, chip1 }; \ 626 I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ 627 I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ 628 static const unsigned short * const forces[] = { force, \ 629 force_##chip1, NULL }; \ 630 I2C_CLIENT_INSMOD_COMMON 631 632 #define I2C_CLIENT_INSMOD_2(chip1, chip2) \ 633 enum chips { any_chip, chip1, chip2 }; \ 634 I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ 635 I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ 636 I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ 637 static const unsigned short * const forces[] = { force, \ 638 force_##chip1, force_##chip2, NULL }; \ 639 I2C_CLIENT_INSMOD_COMMON 640 641 #define I2C_CLIENT_INSMOD_3(chip1, chip2, chip3) \ 642 enum chips { any_chip, chip1, chip2, chip3 }; \ 643 I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ 644 I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ 645 I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ 646 I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ 647 static const unsigned short * const forces[] = { force, \ 648 force_##chip1, force_##chip2, force_##chip3, NULL }; \ 649 I2C_CLIENT_INSMOD_COMMON 650 651 #define I2C_CLIENT_INSMOD_4(chip1, chip2, chip3, chip4) \ 652 enum chips { any_chip, chip1, chip2, chip3, chip4 }; \ 653 I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ 654 I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ 655 I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ 656 I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ 657 I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ 658 static const unsigned short * const forces[] = { force, \ 659 force_##chip1, force_##chip2, force_##chip3, \ 660 force_##chip4, NULL}; \ 661 I2C_CLIENT_INSMOD_COMMON 662 663 #define I2C_CLIENT_INSMOD_5(chip1, chip2, chip3, chip4, chip5) \ 664 enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 }; \ 665 I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ 666 I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ 667 I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ 668 I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ 669 I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ 670 I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ 671 static const unsigned short * const forces[] = { force, \ 672 force_##chip1, force_##chip2, force_##chip3, \ 673 force_##chip4, force_##chip5, NULL }; \ 674 I2C_CLIENT_INSMOD_COMMON 675 676 #define I2C_CLIENT_INSMOD_6(chip1, chip2, chip3, chip4, chip5, chip6) \ 677 enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 }; \ 678 I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ 679 I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ 680 I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ 681 I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ 682 I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ 683 I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ 684 I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ 685 static const unsigned short * const forces[] = { force, \ 686 force_##chip1, force_##chip2, force_##chip3, \ 687 force_##chip4, force_##chip5, force_##chip6, NULL }; \ 688 I2C_CLIENT_INSMOD_COMMON 689 690 #define I2C_CLIENT_INSMOD_7(chip1, chip2, chip3, chip4, chip5, chip6, chip7) \ 691 enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \ 692 chip7 }; \ 693 I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ 694 I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ 695 I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ 696 I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ 697 I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ 698 I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ 699 I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ 700 I2C_CLIENT_MODULE_PARM_FORCE(chip7); \ 701 static const unsigned short * const forces[] = { force, \ 702 force_##chip1, force_##chip2, force_##chip3, \ 703 force_##chip4, force_##chip5, force_##chip6, \ 704 force_##chip7, NULL }; \ 705 I2C_CLIENT_INSMOD_COMMON 706 707 #define I2C_CLIENT_INSMOD_8(chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8) \ 708 enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6, \ 709 chip7, chip8 }; \ 710 I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT); \ 711 I2C_CLIENT_MODULE_PARM_FORCE(chip1); \ 712 I2C_CLIENT_MODULE_PARM_FORCE(chip2); \ 713 I2C_CLIENT_MODULE_PARM_FORCE(chip3); \ 714 I2C_CLIENT_MODULE_PARM_FORCE(chip4); \ 715 I2C_CLIENT_MODULE_PARM_FORCE(chip5); \ 716 I2C_CLIENT_MODULE_PARM_FORCE(chip6); \ 717 I2C_CLIENT_MODULE_PARM_FORCE(chip7); \ 718 I2C_CLIENT_MODULE_PARM_FORCE(chip8); \ 719 static const unsigned short * const forces[] = { force, \ 720 force_##chip1, force_##chip2, force_##chip3, \ 721 force_##chip4, force_##chip5, force_##chip6, \ 722 force_##chip7, force_##chip8, NULL }; \ 723 I2C_CLIENT_INSMOD_COMMON 724 #endif /* __KERNEL__ */ 725 #endif /* _LINUX_I2C_H */ 726