xref: /linux-6.15/include/linux/ethtool.h (revision dfd32cad)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * ethtool.h: Defines for Linux ethtool.
4  *
5  * Copyright (C) 1998 David S. Miller ([email protected])
6  * Copyright 2001 Jeff Garzik <[email protected]>
7  * Portions Copyright 2001 Sun Microsystems ([email protected])
8  * Portions Copyright 2002 Intel ([email protected],
9  *                                [email protected],
10  *                                [email protected])
11  * Portions Copyright (C) Sun Microsystems 2008
12  */
13 #ifndef _LINUX_ETHTOOL_H
14 #define _LINUX_ETHTOOL_H
15 
16 #include <linux/bitmap.h>
17 #include <linux/compat.h>
18 #include <uapi/linux/ethtool.h>
19 
20 #ifdef CONFIG_COMPAT
21 
22 struct compat_ethtool_rx_flow_spec {
23 	u32		flow_type;
24 	union ethtool_flow_union h_u;
25 	struct ethtool_flow_ext h_ext;
26 	union ethtool_flow_union m_u;
27 	struct ethtool_flow_ext m_ext;
28 	compat_u64	ring_cookie;
29 	u32		location;
30 };
31 
32 struct compat_ethtool_rxnfc {
33 	u32				cmd;
34 	u32				flow_type;
35 	compat_u64			data;
36 	struct compat_ethtool_rx_flow_spec fs;
37 	u32				rule_cnt;
38 	u32				rule_locs[0];
39 };
40 
41 #endif /* CONFIG_COMPAT */
42 
43 #include <linux/rculist.h>
44 
45 /**
46  * enum ethtool_phys_id_state - indicator state for physical identification
47  * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
48  * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
49  * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
50  *	is not supported)
51  * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
52  *	is not supported)
53  */
54 enum ethtool_phys_id_state {
55 	ETHTOOL_ID_INACTIVE,
56 	ETHTOOL_ID_ACTIVE,
57 	ETHTOOL_ID_ON,
58 	ETHTOOL_ID_OFF
59 };
60 
61 enum {
62 	ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
63 	ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
64 	ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */
65 
66 	/*
67 	 * Add your fresh new hash function bits above and remember to update
68 	 * rss_hash_func_strings[] in ethtool.c
69 	 */
70 	ETH_RSS_HASH_FUNCS_COUNT
71 };
72 
73 #define __ETH_RSS_HASH_BIT(bit)	((u32)1 << (bit))
74 #define __ETH_RSS_HASH(name)	__ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
75 
76 #define ETH_RSS_HASH_TOP	__ETH_RSS_HASH(TOP)
77 #define ETH_RSS_HASH_XOR	__ETH_RSS_HASH(XOR)
78 #define ETH_RSS_HASH_CRC32	__ETH_RSS_HASH(CRC32)
79 
80 #define ETH_RSS_HASH_UNKNOWN	0
81 #define ETH_RSS_HASH_NO_CHANGE	0
82 
83 struct net_device;
84 
85 /* Some generic methods drivers may use in their ethtool_ops */
86 u32 ethtool_op_get_link(struct net_device *dev);
87 int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
88 
89 /**
90  * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
91  * @index: Index in RX flow hash indirection table
92  * @n_rx_rings: Number of RX rings to use
93  *
94  * This function provides the default policy for RX flow hash indirection.
95  */
96 static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
97 {
98 	return index % n_rx_rings;
99 }
100 
101 /* number of link mode bits/ulongs handled internally by kernel */
102 #define __ETHTOOL_LINK_MODE_MASK_NBITS			\
103 	(__ETHTOOL_LINK_MODE_LAST + 1)
104 
105 /* declare a link mode bitmap */
106 #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name)		\
107 	DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
108 
109 /* drivers must ignore base.cmd and base.link_mode_masks_nwords
110  * fields, but they are allowed to overwrite them (will be ignored).
111  */
112 struct ethtool_link_ksettings {
113 	struct ethtool_link_settings base;
114 	struct {
115 		__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
116 		__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
117 		__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
118 	} link_modes;
119 };
120 
121 /**
122  * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
123  *   @ptr : pointer to struct ethtool_link_ksettings
124  *   @name : one of supported/advertising/lp_advertising
125  */
126 #define ethtool_link_ksettings_zero_link_mode(ptr, name)		\
127 	bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
128 
129 /**
130  * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
131  * link mode mask
132  *   @ptr : pointer to struct ethtool_link_ksettings
133  *   @name : one of supported/advertising/lp_advertising
134  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
135  * (not atomic, no bound checking)
136  */
137 #define ethtool_link_ksettings_add_link_mode(ptr, name, mode)		\
138 	__set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
139 
140 /**
141  * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
142  * link mode mask
143  *   @ptr : pointer to struct ethtool_link_ksettings
144  *   @name : one of supported/advertising/lp_advertising
145  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
146  * (not atomic, no bound checking)
147  */
148 #define ethtool_link_ksettings_del_link_mode(ptr, name, mode)		\
149 	__clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
150 
151 /**
152  * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
153  *   @ptr : pointer to struct ethtool_link_ksettings
154  *   @name : one of supported/advertising/lp_advertising
155  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
156  * (not atomic, no bound checking)
157  *
158  * Returns true/false.
159  */
160 #define ethtool_link_ksettings_test_link_mode(ptr, name, mode)		\
161 	test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
162 
163 extern int
164 __ethtool_get_link_ksettings(struct net_device *dev,
165 			     struct ethtool_link_ksettings *link_ksettings);
166 
167 /**
168  * ethtool_intersect_link_masks - Given two link masks, AND them together
169  * @dst: first mask and where result is stored
170  * @src: second mask to intersect with
171  *
172  * Given two link mode masks, AND them together and save the result in dst.
173  */
174 void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst,
175 				  struct ethtool_link_ksettings *src);
176 
177 void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
178 					     u32 legacy_u32);
179 
180 /* return false if src had higher bits set. lower bits always updated. */
181 bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
182 				     const unsigned long *src);
183 
184 /**
185  * struct ethtool_ops - optional netdev operations
186  * @get_drvinfo: Report driver/device information.  Should only set the
187  *	@driver, @version, @fw_version and @bus_info fields.  If not
188  *	implemented, the @driver and @bus_info fields will be filled in
189  *	according to the netdev's parent device.
190  * @get_regs_len: Get buffer length required for @get_regs
191  * @get_regs: Get device registers
192  * @get_wol: Report whether Wake-on-Lan is enabled
193  * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
194  *	or zero.
195  * @get_msglevel: Report driver message level.  This should be the value
196  *	of the @msg_enable field used by netif logging functions.
197  * @set_msglevel: Set driver message level
198  * @nway_reset: Restart autonegotiation.  Returns a negative error code
199  *	or zero.
200  * @get_link: Report whether physical link is up.  Will only be called if
201  *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
202  *	which uses netif_carrier_ok().
203  * @get_eeprom: Read data from the device EEPROM.
204  *	Should fill in the magic field.  Don't need to check len for zero
205  *	or wraparound.  Fill in the data argument with the eeprom values
206  *	from offset to offset + len.  Update len to the amount read.
207  *	Returns an error or zero.
208  * @set_eeprom: Write data to the device EEPROM.
209  *	Should validate the magic field.  Don't need to check len for zero
210  *	or wraparound.  Update len to the amount written.  Returns an error
211  *	or zero.
212  * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
213  *	error code or zero.
214  * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
215  *	error code or zero.
216  * @get_ringparam: Report ring sizes
217  * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
218  * @get_pauseparam: Report pause parameters
219  * @set_pauseparam: Set pause parameters.  Returns a negative error code
220  *	or zero.
221  * @self_test: Run specified self-tests
222  * @get_strings: Return a set of strings that describe the requested objects
223  * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
224  *	attached to it.  The implementation may update the indicator
225  *	asynchronously or synchronously, but in either case it must return
226  *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
227  *	and must either activate asynchronous updates and return zero, return
228  *	a negative error or return a positive frequency for synchronous
229  *	indication (e.g. 1 for one on/off cycle per second).  If it returns
230  *	a frequency then it will be called again at intervals with the
231  *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
232  *	the indicator accordingly.  Finally, it is called with the argument
233  *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
234  *	negative error code or zero.
235  * @get_ethtool_stats: Return extended statistics about the device.
236  *	This is only useful if the device maintains statistics not
237  *	included in &struct rtnl_link_stats64.
238  * @begin: Function to be called before any other operation.  Returns a
239  *	negative error code or zero.
240  * @complete: Function to be called after any other operation except
241  *	@begin.  Will be called even if the other operation failed.
242  * @get_priv_flags: Report driver-specific feature flags.
243  * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
244  *	error code or zero.
245  * @get_sset_count: Get number of strings that @get_strings will write.
246  * @get_rxnfc: Get RX flow classification rules.  Returns a negative
247  *	error code or zero.
248  * @set_rxnfc: Set RX flow classification rules.  Returns a negative
249  *	error code or zero.
250  * @flash_device: Write a firmware image to device's flash memory.
251  *	Returns a negative error code or zero.
252  * @reset: Reset (part of) the device, as specified by a bitmask of
253  *	flags from &enum ethtool_reset_flags.  Returns a negative
254  *	error code or zero.
255  * @get_rxfh_key_size: Get the size of the RX flow hash key.
256  *	Returns zero if not supported for this specific device.
257  * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
258  *	Returns zero if not supported for this specific device.
259  * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
260  *	and/or hash function.
261  *	Returns a negative error code or zero.
262  * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
263  *	key, and/or hash function.  Arguments which are set to %NULL or zero
264  *	will remain unchanged.
265  *	Returns a negative error code or zero. An error code must be returned
266  *	if at least one unsupported change was requested.
267  * @get_channels: Get number of channels.
268  * @set_channels: Set number of channels.  Returns a negative error code or
269  *	zero.
270  * @get_dump_flag: Get dump flag indicating current dump length, version,
271  * 		   and flag of the device.
272  * @get_dump_data: Get dump data.
273  * @set_dump: Set dump specific flags to the device.
274  * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
275  *	Drivers supporting transmit time stamps in software should set this to
276  *	ethtool_op_get_ts_info().
277  * @get_module_info: Get the size and type of the eeprom contained within
278  *	a plug-in module.
279  * @get_module_eeprom: Get the eeprom information from the plug-in module
280  * @get_eee: Get Energy-Efficient (EEE) supported and status.
281  * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
282  * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
283  *	It must check that the given queue number is valid. If neither a RX nor
284  *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
285  *	queue has this number, set the inapplicable fields to ~0 and return 0.
286  *	Returns a negative error code or zero.
287  * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
288  *	It must check that the given queue number is valid. If neither a RX nor
289  *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
290  *	queue has this number, ignore the inapplicable fields.
291  *	Returns a negative error code or zero.
292  * @get_link_ksettings: Get various device settings including Ethernet link
293  *	settings. The %cmd and %link_mode_masks_nwords fields should be
294  *	ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
295  *	any change to them will be overwritten by kernel. Returns a negative
296  *	error code or zero.
297  * @set_link_ksettings: Set various device settings including Ethernet link
298  *	settings. The %cmd and %link_mode_masks_nwords fields should be
299  *	ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
300  *	any change to them will be overwritten by kernel. Returns a negative
301  *	error code or zero.
302  * @get_fecparam: Get the network device Forward Error Correction parameters.
303  * @set_fecparam: Set the network device Forward Error Correction parameters.
304  * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
305  *	This is only useful if the device maintains PHY statistics and
306  *	cannot use the standard PHY library helpers.
307  *
308  * All operations are optional (i.e. the function pointer may be set
309  * to %NULL) and callers must take this into account.  Callers must
310  * hold the RTNL lock.
311  *
312  * See the structures used by these operations for further documentation.
313  * Note that for all operations using a structure ending with a zero-
314  * length array, the array is allocated separately in the kernel and
315  * is passed to the driver as an additional parameter.
316  *
317  * See &struct net_device and &struct net_device_ops for documentation
318  * of the generic netdev features interface.
319  */
320 struct ethtool_ops {
321 	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
322 	int	(*get_regs_len)(struct net_device *);
323 	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
324 	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
325 	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
326 	u32	(*get_msglevel)(struct net_device *);
327 	void	(*set_msglevel)(struct net_device *, u32);
328 	int	(*nway_reset)(struct net_device *);
329 	u32	(*get_link)(struct net_device *);
330 	int	(*get_eeprom_len)(struct net_device *);
331 	int	(*get_eeprom)(struct net_device *,
332 			      struct ethtool_eeprom *, u8 *);
333 	int	(*set_eeprom)(struct net_device *,
334 			      struct ethtool_eeprom *, u8 *);
335 	int	(*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
336 	int	(*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
337 	void	(*get_ringparam)(struct net_device *,
338 				 struct ethtool_ringparam *);
339 	int	(*set_ringparam)(struct net_device *,
340 				 struct ethtool_ringparam *);
341 	void	(*get_pauseparam)(struct net_device *,
342 				  struct ethtool_pauseparam*);
343 	int	(*set_pauseparam)(struct net_device *,
344 				  struct ethtool_pauseparam*);
345 	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
346 	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
347 	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
348 	void	(*get_ethtool_stats)(struct net_device *,
349 				     struct ethtool_stats *, u64 *);
350 	int	(*begin)(struct net_device *);
351 	void	(*complete)(struct net_device *);
352 	u32	(*get_priv_flags)(struct net_device *);
353 	int	(*set_priv_flags)(struct net_device *, u32);
354 	int	(*get_sset_count)(struct net_device *, int);
355 	int	(*get_rxnfc)(struct net_device *,
356 			     struct ethtool_rxnfc *, u32 *rule_locs);
357 	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
358 	int	(*flash_device)(struct net_device *, struct ethtool_flash *);
359 	int	(*reset)(struct net_device *, u32 *);
360 	u32	(*get_rxfh_key_size)(struct net_device *);
361 	u32	(*get_rxfh_indir_size)(struct net_device *);
362 	int	(*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
363 			    u8 *hfunc);
364 	int	(*set_rxfh)(struct net_device *, const u32 *indir,
365 			    const u8 *key, const u8 hfunc);
366 	int	(*get_rxfh_context)(struct net_device *, u32 *indir, u8 *key,
367 				    u8 *hfunc, u32 rss_context);
368 	int	(*set_rxfh_context)(struct net_device *, const u32 *indir,
369 				    const u8 *key, const u8 hfunc,
370 				    u32 *rss_context, bool delete);
371 	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
372 	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
373 	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
374 	int	(*get_dump_data)(struct net_device *,
375 				 struct ethtool_dump *, void *);
376 	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
377 	int	(*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
378 	int     (*get_module_info)(struct net_device *,
379 				   struct ethtool_modinfo *);
380 	int     (*get_module_eeprom)(struct net_device *,
381 				     struct ethtool_eeprom *, u8 *);
382 	int	(*get_eee)(struct net_device *, struct ethtool_eee *);
383 	int	(*set_eee)(struct net_device *, struct ethtool_eee *);
384 	int	(*get_tunable)(struct net_device *,
385 			       const struct ethtool_tunable *, void *);
386 	int	(*set_tunable)(struct net_device *,
387 			       const struct ethtool_tunable *, const void *);
388 	int	(*get_per_queue_coalesce)(struct net_device *, u32,
389 					  struct ethtool_coalesce *);
390 	int	(*set_per_queue_coalesce)(struct net_device *, u32,
391 					  struct ethtool_coalesce *);
392 	int	(*get_link_ksettings)(struct net_device *,
393 				      struct ethtool_link_ksettings *);
394 	int	(*set_link_ksettings)(struct net_device *,
395 				      const struct ethtool_link_ksettings *);
396 	int	(*get_fecparam)(struct net_device *,
397 				      struct ethtool_fecparam *);
398 	int	(*set_fecparam)(struct net_device *,
399 				      struct ethtool_fecparam *);
400 	void	(*get_ethtool_phy_stats)(struct net_device *,
401 					 struct ethtool_stats *, u64 *);
402 };
403 #endif /* _LINUX_ETHTOOL_H */
404