xref: /linux-6.15/include/linux/ethtool.h (revision 82d00a93)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * ethtool.h: Defines for Linux ethtool.
4  *
5  * Copyright (C) 1998 David S. Miller ([email protected])
6  * Copyright 2001 Jeff Garzik <[email protected]>
7  * Portions Copyright 2001 Sun Microsystems ([email protected])
8  * Portions Copyright 2002 Intel ([email protected],
9  *                                [email protected],
10  *                                [email protected])
11  * Portions Copyright (C) Sun Microsystems 2008
12  */
13 #ifndef _LINUX_ETHTOOL_H
14 #define _LINUX_ETHTOOL_H
15 
16 #include <linux/bitmap.h>
17 #include <linux/compat.h>
18 #include <uapi/linux/ethtool.h>
19 
20 #ifdef CONFIG_COMPAT
21 
22 struct compat_ethtool_rx_flow_spec {
23 	u32		flow_type;
24 	union ethtool_flow_union h_u;
25 	struct ethtool_flow_ext h_ext;
26 	union ethtool_flow_union m_u;
27 	struct ethtool_flow_ext m_ext;
28 	compat_u64	ring_cookie;
29 	u32		location;
30 };
31 
32 struct compat_ethtool_rxnfc {
33 	u32				cmd;
34 	u32				flow_type;
35 	compat_u64			data;
36 	struct compat_ethtool_rx_flow_spec fs;
37 	u32				rule_cnt;
38 	u32				rule_locs[];
39 };
40 
41 #endif /* CONFIG_COMPAT */
42 
43 #include <linux/rculist.h>
44 
45 /**
46  * enum ethtool_phys_id_state - indicator state for physical identification
47  * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
48  * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
49  * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
50  *	is not supported)
51  * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
52  *	is not supported)
53  */
54 enum ethtool_phys_id_state {
55 	ETHTOOL_ID_INACTIVE,
56 	ETHTOOL_ID_ACTIVE,
57 	ETHTOOL_ID_ON,
58 	ETHTOOL_ID_OFF
59 };
60 
61 enum {
62 	ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */
63 	ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */
64 	ETH_RSS_HASH_CRC32_BIT, /* Configurable RSS hash function - Crc32 */
65 
66 	/*
67 	 * Add your fresh new hash function bits above and remember to update
68 	 * rss_hash_func_strings[] in ethtool.c
69 	 */
70 	ETH_RSS_HASH_FUNCS_COUNT
71 };
72 
73 #define __ETH_RSS_HASH_BIT(bit)	((u32)1 << (bit))
74 #define __ETH_RSS_HASH(name)	__ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT)
75 
76 #define ETH_RSS_HASH_TOP	__ETH_RSS_HASH(TOP)
77 #define ETH_RSS_HASH_XOR	__ETH_RSS_HASH(XOR)
78 #define ETH_RSS_HASH_CRC32	__ETH_RSS_HASH(CRC32)
79 
80 #define ETH_RSS_HASH_UNKNOWN	0
81 #define ETH_RSS_HASH_NO_CHANGE	0
82 
83 struct net_device;
84 
85 /* Some generic methods drivers may use in their ethtool_ops */
86 u32 ethtool_op_get_link(struct net_device *dev);
87 int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
88 
89 /**
90  * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
91  * @index: Index in RX flow hash indirection table
92  * @n_rx_rings: Number of RX rings to use
93  *
94  * This function provides the default policy for RX flow hash indirection.
95  */
96 static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
97 {
98 	return index % n_rx_rings;
99 }
100 
101 /* declare a link mode bitmap */
102 #define __ETHTOOL_DECLARE_LINK_MODE_MASK(name)		\
103 	DECLARE_BITMAP(name, __ETHTOOL_LINK_MODE_MASK_NBITS)
104 
105 /* drivers must ignore base.cmd and base.link_mode_masks_nwords
106  * fields, but they are allowed to overwrite them (will be ignored).
107  */
108 struct ethtool_link_ksettings {
109 	struct ethtool_link_settings base;
110 	struct {
111 		__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
112 		__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
113 		__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
114 	} link_modes;
115 };
116 
117 /**
118  * ethtool_link_ksettings_zero_link_mode - clear link_ksettings link mode mask
119  *   @ptr : pointer to struct ethtool_link_ksettings
120  *   @name : one of supported/advertising/lp_advertising
121  */
122 #define ethtool_link_ksettings_zero_link_mode(ptr, name)		\
123 	bitmap_zero((ptr)->link_modes.name, __ETHTOOL_LINK_MODE_MASK_NBITS)
124 
125 /**
126  * ethtool_link_ksettings_add_link_mode - set bit in link_ksettings
127  * link mode mask
128  *   @ptr : pointer to struct ethtool_link_ksettings
129  *   @name : one of supported/advertising/lp_advertising
130  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
131  * (not atomic, no bound checking)
132  */
133 #define ethtool_link_ksettings_add_link_mode(ptr, name, mode)		\
134 	__set_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
135 
136 /**
137  * ethtool_link_ksettings_del_link_mode - clear bit in link_ksettings
138  * link mode mask
139  *   @ptr : pointer to struct ethtool_link_ksettings
140  *   @name : one of supported/advertising/lp_advertising
141  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
142  * (not atomic, no bound checking)
143  */
144 #define ethtool_link_ksettings_del_link_mode(ptr, name, mode)		\
145 	__clear_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
146 
147 /**
148  * ethtool_link_ksettings_test_link_mode - test bit in ksettings link mode mask
149  *   @ptr : pointer to struct ethtool_link_ksettings
150  *   @name : one of supported/advertising/lp_advertising
151  *   @mode : one of the ETHTOOL_LINK_MODE_*_BIT
152  * (not atomic, no bound checking)
153  *
154  * Returns true/false.
155  */
156 #define ethtool_link_ksettings_test_link_mode(ptr, name, mode)		\
157 	test_bit(ETHTOOL_LINK_MODE_ ## mode ## _BIT, (ptr)->link_modes.name)
158 
159 extern int
160 __ethtool_get_link_ksettings(struct net_device *dev,
161 			     struct ethtool_link_ksettings *link_ksettings);
162 
163 /**
164  * ethtool_intersect_link_masks - Given two link masks, AND them together
165  * @dst: first mask and where result is stored
166  * @src: second mask to intersect with
167  *
168  * Given two link mode masks, AND them together and save the result in dst.
169  */
170 void ethtool_intersect_link_masks(struct ethtool_link_ksettings *dst,
171 				  struct ethtool_link_ksettings *src);
172 
173 void ethtool_convert_legacy_u32_to_link_mode(unsigned long *dst,
174 					     u32 legacy_u32);
175 
176 /* return false if src had higher bits set. lower bits always updated. */
177 bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
178 				     const unsigned long *src);
179 
180 #define ETHTOOL_COALESCE_RX_USECS		BIT(0)
181 #define ETHTOOL_COALESCE_RX_MAX_FRAMES		BIT(1)
182 #define ETHTOOL_COALESCE_RX_USECS_IRQ		BIT(2)
183 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ	BIT(3)
184 #define ETHTOOL_COALESCE_TX_USECS		BIT(4)
185 #define ETHTOOL_COALESCE_TX_MAX_FRAMES		BIT(5)
186 #define ETHTOOL_COALESCE_TX_USECS_IRQ		BIT(6)
187 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ	BIT(7)
188 #define ETHTOOL_COALESCE_STATS_BLOCK_USECS	BIT(8)
189 #define ETHTOOL_COALESCE_USE_ADAPTIVE_RX	BIT(9)
190 #define ETHTOOL_COALESCE_USE_ADAPTIVE_TX	BIT(10)
191 #define ETHTOOL_COALESCE_PKT_RATE_LOW		BIT(11)
192 #define ETHTOOL_COALESCE_RX_USECS_LOW		BIT(12)
193 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW	BIT(13)
194 #define ETHTOOL_COALESCE_TX_USECS_LOW		BIT(14)
195 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW	BIT(15)
196 #define ETHTOOL_COALESCE_PKT_RATE_HIGH		BIT(16)
197 #define ETHTOOL_COALESCE_RX_USECS_HIGH		BIT(17)
198 #define ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH	BIT(18)
199 #define ETHTOOL_COALESCE_TX_USECS_HIGH		BIT(19)
200 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH	BIT(20)
201 #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL	BIT(21)
202 
203 #define ETHTOOL_COALESCE_USECS						\
204 	(ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
205 #define ETHTOOL_COALESCE_MAX_FRAMES					\
206 	(ETHTOOL_COALESCE_RX_MAX_FRAMES | ETHTOOL_COALESCE_TX_MAX_FRAMES)
207 #define ETHTOOL_COALESCE_USECS_IRQ					\
208 	(ETHTOOL_COALESCE_RX_USECS_IRQ | ETHTOOL_COALESCE_TX_USECS_IRQ)
209 #define ETHTOOL_COALESCE_MAX_FRAMES_IRQ		\
210 	(ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |	\
211 	 ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ)
212 #define ETHTOOL_COALESCE_USE_ADAPTIVE					\
213 	(ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX)
214 #define ETHTOOL_COALESCE_USECS_LOW_HIGH					\
215 	(ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_TX_USECS_LOW | \
216 	 ETHTOOL_COALESCE_RX_USECS_HIGH | ETHTOOL_COALESCE_TX_USECS_HIGH)
217 #define ETHTOOL_COALESCE_MAX_FRAMES_LOW_HIGH	\
218 	(ETHTOOL_COALESCE_RX_MAX_FRAMES_LOW |	\
219 	 ETHTOOL_COALESCE_TX_MAX_FRAMES_LOW |	\
220 	 ETHTOOL_COALESCE_RX_MAX_FRAMES_HIGH |	\
221 	 ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH)
222 #define ETHTOOL_COALESCE_PKT_RATE_RX_USECS				\
223 	(ETHTOOL_COALESCE_USE_ADAPTIVE_RX |				\
224 	 ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \
225 	 ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \
226 	 ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL)
227 
228 /**
229  * struct ethtool_ops - optional netdev operations
230  * @supported_coalesce_params: supported types of interrupt coalescing.
231  * @get_drvinfo: Report driver/device information.  Should only set the
232  *	@driver, @version, @fw_version and @bus_info fields.  If not
233  *	implemented, the @driver and @bus_info fields will be filled in
234  *	according to the netdev's parent device.
235  * @get_regs_len: Get buffer length required for @get_regs
236  * @get_regs: Get device registers
237  * @get_wol: Report whether Wake-on-Lan is enabled
238  * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
239  *	or zero.
240  * @get_msglevel: Report driver message level.  This should be the value
241  *	of the @msg_enable field used by netif logging functions.
242  * @set_msglevel: Set driver message level
243  * @nway_reset: Restart autonegotiation.  Returns a negative error code
244  *	or zero.
245  * @get_link: Report whether physical link is up.  Will only be called if
246  *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
247  *	which uses netif_carrier_ok().
248  * @get_eeprom: Read data from the device EEPROM.
249  *	Should fill in the magic field.  Don't need to check len for zero
250  *	or wraparound.  Fill in the data argument with the eeprom values
251  *	from offset to offset + len.  Update len to the amount read.
252  *	Returns an error or zero.
253  * @set_eeprom: Write data to the device EEPROM.
254  *	Should validate the magic field.  Don't need to check len for zero
255  *	or wraparound.  Update len to the amount written.  Returns an error
256  *	or zero.
257  * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
258  *	error code or zero.
259  * @set_coalesce: Set interrupt coalescing parameters.  Supported coalescing
260  *	types should be set in @supported_coalesce_params.
261  *	Returns a negative error code or zero.
262  * @get_ringparam: Report ring sizes
263  * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
264  * @get_pauseparam: Report pause parameters
265  * @set_pauseparam: Set pause parameters.  Returns a negative error code
266  *	or zero.
267  * @self_test: Run specified self-tests
268  * @get_strings: Return a set of strings that describe the requested objects
269  * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
270  *	attached to it.  The implementation may update the indicator
271  *	asynchronously or synchronously, but in either case it must return
272  *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
273  *	and must either activate asynchronous updates and return zero, return
274  *	a negative error or return a positive frequency for synchronous
275  *	indication (e.g. 1 for one on/off cycle per second).  If it returns
276  *	a frequency then it will be called again at intervals with the
277  *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
278  *	the indicator accordingly.  Finally, it is called with the argument
279  *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
280  *	negative error code or zero.
281  * @get_ethtool_stats: Return extended statistics about the device.
282  *	This is only useful if the device maintains statistics not
283  *	included in &struct rtnl_link_stats64.
284  * @begin: Function to be called before any other operation.  Returns a
285  *	negative error code or zero.
286  * @complete: Function to be called after any other operation except
287  *	@begin.  Will be called even if the other operation failed.
288  * @get_priv_flags: Report driver-specific feature flags.
289  * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
290  *	error code or zero.
291  * @get_sset_count: Get number of strings that @get_strings will write.
292  * @get_rxnfc: Get RX flow classification rules.  Returns a negative
293  *	error code or zero.
294  * @set_rxnfc: Set RX flow classification rules.  Returns a negative
295  *	error code or zero.
296  * @flash_device: Write a firmware image to device's flash memory.
297  *	Returns a negative error code or zero.
298  * @reset: Reset (part of) the device, as specified by a bitmask of
299  *	flags from &enum ethtool_reset_flags.  Returns a negative
300  *	error code or zero.
301  * @get_rxfh_key_size: Get the size of the RX flow hash key.
302  *	Returns zero if not supported for this specific device.
303  * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
304  *	Returns zero if not supported for this specific device.
305  * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key
306  *	and/or hash function.
307  *	Returns a negative error code or zero.
308  * @set_rxfh: Set the contents of the RX flow hash indirection table, hash
309  *	key, and/or hash function.  Arguments which are set to %NULL or zero
310  *	will remain unchanged.
311  *	Returns a negative error code or zero. An error code must be returned
312  *	if at least one unsupported change was requested.
313  * @get_rxfh_context: Get the contents of the RX flow hash indirection table,
314  *	hash key, and/or hash function assiciated to the given rss context.
315  *	Returns a negative error code or zero.
316  * @set_rxfh_context: Create, remove and configure RSS contexts. Allows setting
317  *	the contents of the RX flow hash indirection table, hash key, and/or
318  *	hash function associated to the given context. Arguments which are set
319  *	to %NULL or zero will remain unchanged.
320  *	Returns a negative error code or zero. An error code must be returned
321  *	if at least one unsupported change was requested.
322  * @get_channels: Get number of channels.
323  * @set_channels: Set number of channels.  Returns a negative error code or
324  *	zero.
325  * @get_dump_flag: Get dump flag indicating current dump length, version,
326  * 		   and flag of the device.
327  * @get_dump_data: Get dump data.
328  * @set_dump: Set dump specific flags to the device.
329  * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
330  *	Drivers supporting transmit time stamps in software should set this to
331  *	ethtool_op_get_ts_info().
332  * @get_module_info: Get the size and type of the eeprom contained within
333  *	a plug-in module.
334  * @get_module_eeprom: Get the eeprom information from the plug-in module
335  * @get_eee: Get Energy-Efficient (EEE) supported and status.
336  * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
337  * @get_per_queue_coalesce: Get interrupt coalescing parameters per queue.
338  *	It must check that the given queue number is valid. If neither a RX nor
339  *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
340  *	queue has this number, set the inapplicable fields to ~0 and return 0.
341  *	Returns a negative error code or zero.
342  * @set_per_queue_coalesce: Set interrupt coalescing parameters per queue.
343  *	It must check that the given queue number is valid. If neither a RX nor
344  *	a TX queue has this number, return -EINVAL. If only a RX queue or a TX
345  *	queue has this number, ignore the inapplicable fields. Supported
346  *	coalescing types should be set in @supported_coalesce_params.
347  *	Returns a negative error code or zero.
348  * @get_link_ksettings: Get various device settings including Ethernet link
349  *	settings. The %cmd and %link_mode_masks_nwords fields should be
350  *	ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
351  *	any change to them will be overwritten by kernel. Returns a negative
352  *	error code or zero.
353  * @set_link_ksettings: Set various device settings including Ethernet link
354  *	settings. The %cmd and %link_mode_masks_nwords fields should be
355  *	ignored (use %__ETHTOOL_LINK_MODE_MASK_NBITS instead of the latter),
356  *	any change to them will be overwritten by kernel. Returns a negative
357  *	error code or zero.
358  * @get_fecparam: Get the network device Forward Error Correction parameters.
359  * @set_fecparam: Set the network device Forward Error Correction parameters.
360  * @get_ethtool_phy_stats: Return extended statistics about the PHY device.
361  *	This is only useful if the device maintains PHY statistics and
362  *	cannot use the standard PHY library helpers.
363  *
364  * All operations are optional (i.e. the function pointer may be set
365  * to %NULL) and callers must take this into account.  Callers must
366  * hold the RTNL lock.
367  *
368  * See the structures used by these operations for further documentation.
369  * Note that for all operations using a structure ending with a zero-
370  * length array, the array is allocated separately in the kernel and
371  * is passed to the driver as an additional parameter.
372  *
373  * See &struct net_device and &struct net_device_ops for documentation
374  * of the generic netdev features interface.
375  */
376 struct ethtool_ops {
377 	u32	supported_coalesce_params;
378 	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
379 	int	(*get_regs_len)(struct net_device *);
380 	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
381 	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
382 	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
383 	u32	(*get_msglevel)(struct net_device *);
384 	void	(*set_msglevel)(struct net_device *, u32);
385 	int	(*nway_reset)(struct net_device *);
386 	u32	(*get_link)(struct net_device *);
387 	int	(*get_eeprom_len)(struct net_device *);
388 	int	(*get_eeprom)(struct net_device *,
389 			      struct ethtool_eeprom *, u8 *);
390 	int	(*set_eeprom)(struct net_device *,
391 			      struct ethtool_eeprom *, u8 *);
392 	int	(*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
393 	int	(*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
394 	void	(*get_ringparam)(struct net_device *,
395 				 struct ethtool_ringparam *);
396 	int	(*set_ringparam)(struct net_device *,
397 				 struct ethtool_ringparam *);
398 	void	(*get_pauseparam)(struct net_device *,
399 				  struct ethtool_pauseparam*);
400 	int	(*set_pauseparam)(struct net_device *,
401 				  struct ethtool_pauseparam*);
402 	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
403 	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
404 	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
405 	void	(*get_ethtool_stats)(struct net_device *,
406 				     struct ethtool_stats *, u64 *);
407 	int	(*begin)(struct net_device *);
408 	void	(*complete)(struct net_device *);
409 	u32	(*get_priv_flags)(struct net_device *);
410 	int	(*set_priv_flags)(struct net_device *, u32);
411 	int	(*get_sset_count)(struct net_device *, int);
412 	int	(*get_rxnfc)(struct net_device *,
413 			     struct ethtool_rxnfc *, u32 *rule_locs);
414 	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
415 	int	(*flash_device)(struct net_device *, struct ethtool_flash *);
416 	int	(*reset)(struct net_device *, u32 *);
417 	u32	(*get_rxfh_key_size)(struct net_device *);
418 	u32	(*get_rxfh_indir_size)(struct net_device *);
419 	int	(*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
420 			    u8 *hfunc);
421 	int	(*set_rxfh)(struct net_device *, const u32 *indir,
422 			    const u8 *key, const u8 hfunc);
423 	int	(*get_rxfh_context)(struct net_device *, u32 *indir, u8 *key,
424 				    u8 *hfunc, u32 rss_context);
425 	int	(*set_rxfh_context)(struct net_device *, const u32 *indir,
426 				    const u8 *key, const u8 hfunc,
427 				    u32 *rss_context, bool delete);
428 	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
429 	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
430 	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
431 	int	(*get_dump_data)(struct net_device *,
432 				 struct ethtool_dump *, void *);
433 	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
434 	int	(*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
435 	int     (*get_module_info)(struct net_device *,
436 				   struct ethtool_modinfo *);
437 	int     (*get_module_eeprom)(struct net_device *,
438 				     struct ethtool_eeprom *, u8 *);
439 	int	(*get_eee)(struct net_device *, struct ethtool_eee *);
440 	int	(*set_eee)(struct net_device *, struct ethtool_eee *);
441 	int	(*get_tunable)(struct net_device *,
442 			       const struct ethtool_tunable *, void *);
443 	int	(*set_tunable)(struct net_device *,
444 			       const struct ethtool_tunable *, const void *);
445 	int	(*get_per_queue_coalesce)(struct net_device *, u32,
446 					  struct ethtool_coalesce *);
447 	int	(*set_per_queue_coalesce)(struct net_device *, u32,
448 					  struct ethtool_coalesce *);
449 	int	(*get_link_ksettings)(struct net_device *,
450 				      struct ethtool_link_ksettings *);
451 	int	(*set_link_ksettings)(struct net_device *,
452 				      const struct ethtool_link_ksettings *);
453 	int	(*get_fecparam)(struct net_device *,
454 				      struct ethtool_fecparam *);
455 	int	(*set_fecparam)(struct net_device *,
456 				      struct ethtool_fecparam *);
457 	void	(*get_ethtool_phy_stats)(struct net_device *,
458 					 struct ethtool_stats *, u64 *);
459 };
460 
461 int ethtool_check_ops(const struct ethtool_ops *ops);
462 
463 struct ethtool_rx_flow_rule {
464 	struct flow_rule	*rule;
465 	unsigned long		priv[];
466 };
467 
468 struct ethtool_rx_flow_spec_input {
469 	const struct ethtool_rx_flow_spec	*fs;
470 	u32					rss_ctx;
471 };
472 
473 struct ethtool_rx_flow_rule *
474 ethtool_rx_flow_rule_create(const struct ethtool_rx_flow_spec_input *input);
475 void ethtool_rx_flow_rule_destroy(struct ethtool_rx_flow_rule *rule);
476 
477 bool ethtool_virtdev_validate_cmd(const struct ethtool_link_ksettings *cmd);
478 int ethtool_virtdev_set_link_ksettings(struct net_device *dev,
479 				       const struct ethtool_link_ksettings *cmd,
480 				       u32 *dev_speed, u8 *dev_duplex);
481 
482 
483 #endif /* _LINUX_ETHTOOL_H */
484