1 #ifndef LINUX_BCMA_DRIVER_CC_H_ 2 #define LINUX_BCMA_DRIVER_CC_H_ 3 4 #include <linux/platform_device.h> 5 #include <linux/gpio.h> 6 7 /** ChipCommon core registers. **/ 8 #define BCMA_CC_ID 0x0000 9 #define BCMA_CC_ID_ID 0x0000FFFF 10 #define BCMA_CC_ID_ID_SHIFT 0 11 #define BCMA_CC_ID_REV 0x000F0000 12 #define BCMA_CC_ID_REV_SHIFT 16 13 #define BCMA_CC_ID_PKG 0x00F00000 14 #define BCMA_CC_ID_PKG_SHIFT 20 15 #define BCMA_CC_ID_NRCORES 0x0F000000 16 #define BCMA_CC_ID_NRCORES_SHIFT 24 17 #define BCMA_CC_ID_TYPE 0xF0000000 18 #define BCMA_CC_ID_TYPE_SHIFT 28 19 #define BCMA_CC_CAP 0x0004 /* Capabilities */ 20 #define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */ 21 #define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ 22 #define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */ 23 #define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */ 24 #define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */ 25 #define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */ 26 #define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */ 27 #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ 28 #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ 29 #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ 30 #define BCMA_CC_FLASHT_NAND 0x00000300 /* NAND flash */ 31 #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ 32 #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ 33 #define BCMA_PLLTYPE_NONE 0x00000000 34 #define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */ 35 #define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */ 36 #define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */ 37 #define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */ 38 #define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */ 39 #define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */ 40 #define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */ 41 #define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */ 42 #define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */ 43 #define BCMA_CC_CAP_OTPS_SHIFT 19 44 #define BCMA_CC_CAP_OTPS_BASE 5 45 #define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */ 46 #define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */ 47 #define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */ 48 #define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ 49 #define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ 50 #define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ 51 #define BCMA_CC_CAP_NFLASH 0x80000000 /* NAND flash present (rev >= 35 or BCM4706?) */ 52 #define BCMA_CC_CORECTL 0x0008 53 #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ 54 #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ 55 #define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ 56 #define BCMA_CC_BIST 0x000C 57 #define BCMA_CC_OTPS 0x0010 /* OTP status */ 58 #define BCMA_CC_OTPS_PROGFAIL 0x80000000 59 #define BCMA_CC_OTPS_PROTECT 0x00000007 60 #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 61 #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 62 #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 63 #define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ 64 #define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 65 #define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ 66 #define BCMA_CC_OTPC 0x0014 /* OTP control */ 67 #define BCMA_CC_OTPC_RECWAIT 0xFF000000 68 #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 69 #define BCMA_CC_OTPC_PRW_SHIFT 8 70 #define BCMA_CC_OTPC_MAXFAIL 0x00000038 71 #define BCMA_CC_OTPC_VSEL 0x00000006 72 #define BCMA_CC_OTPC_SELVL 0x00000001 73 #define BCMA_CC_OTPP 0x0018 /* OTP prog */ 74 #define BCMA_CC_OTPP_COL 0x000000FF 75 #define BCMA_CC_OTPP_ROW 0x0000FF00 76 #define BCMA_CC_OTPP_ROW_SHIFT 8 77 #define BCMA_CC_OTPP_READERR 0x10000000 78 #define BCMA_CC_OTPP_VALUE 0x20000000 79 #define BCMA_CC_OTPP_READ 0x40000000 80 #define BCMA_CC_OTPP_START 0x80000000 81 #define BCMA_CC_OTPP_BUSY 0x80000000 82 #define BCMA_CC_OTPL 0x001C /* OTP layout */ 83 #define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ 84 #define BCMA_CC_IRQSTAT 0x0020 85 #define BCMA_CC_IRQMASK 0x0024 86 #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ 87 #define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */ 88 #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ 89 #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ 90 #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ 91 #define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 92 #define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 93 #define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 94 #define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 95 #define BCMA_CC_CHIPST_43228_ILP_DIV_EN 0x00000001 96 #define BCMA_CC_CHIPST_43228_OTP_PRESENT 0x00000002 97 #define BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL 0x00000004 98 #define BCMA_CC_CHIPST_43228_SDIO_MODE 0x00000008 99 #define BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT 0x00000010 100 #define BCMA_CC_CHIPST_43228_SDIO_RESET 0x00000020 101 #define BCMA_CC_CHIPST_4706_PKG_OPTION BIT(0) /* 0: full-featured package 1: low-cost package */ 102 #define BCMA_CC_CHIPST_4706_SFLASH_PRESENT BIT(1) /* 0: parallel, 1: serial flash is present */ 103 #define BCMA_CC_CHIPST_4706_SFLASH_TYPE BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */ 104 #define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ 105 #define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ 106 #define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */ 107 #define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001 108 #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ 109 #define BCMA_CC_JCMD_START 0x80000000 110 #define BCMA_CC_JCMD_BUSY 0x80000000 111 #define BCMA_CC_JCMD_PAUSE 0x40000000 112 #define BCMA_CC_JCMD0_ACC_MASK 0x0000F000 113 #define BCMA_CC_JCMD0_ACC_IRDR 0x00000000 114 #define BCMA_CC_JCMD0_ACC_DR 0x00001000 115 #define BCMA_CC_JCMD0_ACC_IR 0x00002000 116 #define BCMA_CC_JCMD0_ACC_RESET 0x00003000 117 #define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000 118 #define BCMA_CC_JCMD0_ACC_PDR 0x00005000 119 #define BCMA_CC_JCMD0_IRW_MASK 0x00000F00 120 #define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */ 121 #define BCMA_CC_JCMD_ACC_IRDR 0x00000000 122 #define BCMA_CC_JCMD_ACC_DR 0x00010000 123 #define BCMA_CC_JCMD_ACC_IR 0x00020000 124 #define BCMA_CC_JCMD_ACC_RESET 0x00030000 125 #define BCMA_CC_JCMD_ACC_IRPDR 0x00040000 126 #define BCMA_CC_JCMD_ACC_PDR 0x00050000 127 #define BCMA_CC_JCMD_IRW_MASK 0x00001F00 128 #define BCMA_CC_JCMD_IRW_SHIFT 8 129 #define BCMA_CC_JCMD_DRW_MASK 0x0000003F 130 #define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */ 131 #define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */ 132 #define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */ 133 #define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */ 134 #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ 135 #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ 136 #define BCMA_CC_FLASHCTL 0x0040 137 /* Start/busy bit in flashcontrol */ 138 #define BCMA_CC_FLASHCTL_OPCODE 0x000000ff 139 #define BCMA_CC_FLASHCTL_ACTION 0x00000700 140 #define BCMA_CC_FLASHCTL_CS_ACTIVE 0x00001000 /* Chip Select Active, rev >= 20 */ 141 #define BCMA_CC_FLASHCTL_START 0x80000000 142 #define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START 143 /* Flashcontrol action + opcodes for ST flashes */ 144 #define BCMA_CC_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ 145 #define BCMA_CC_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ 146 #define BCMA_CC_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ 147 #define BCMA_CC_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ 148 #define BCMA_CC_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ 149 #define BCMA_CC_FLASHCTL_ST_PP 0x0302 /* Page Program */ 150 #define BCMA_CC_FLASHCTL_ST_SE 0x02d8 /* Sector Erase */ 151 #define BCMA_CC_FLASHCTL_ST_BE 0x00c7 /* Bulk Erase */ 152 #define BCMA_CC_FLASHCTL_ST_DP 0x00b9 /* Deep Power-down */ 153 #define BCMA_CC_FLASHCTL_ST_RES 0x03ab /* Read Electronic Signature */ 154 #define BCMA_CC_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ 155 #define BCMA_CC_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ 156 /* Flashcontrol action + opcodes for Atmel flashes */ 157 #define BCMA_CC_FLASHCTL_AT_READ 0x07e8 158 #define BCMA_CC_FLASHCTL_AT_PAGE_READ 0x07d2 159 #define BCMA_CC_FLASHCTL_AT_STATUS 0x01d7 160 #define BCMA_CC_FLASHCTL_AT_BUF1_WRITE 0x0384 161 #define BCMA_CC_FLASHCTL_AT_BUF2_WRITE 0x0387 162 #define BCMA_CC_FLASHCTL_AT_BUF1_ERASE_PROGRAM 0x0283 163 #define BCMA_CC_FLASHCTL_AT_BUF2_ERASE_PROGRAM 0x0286 164 #define BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM 0x0288 165 #define BCMA_CC_FLASHCTL_AT_BUF2_PROGRAM 0x0289 166 #define BCMA_CC_FLASHCTL_AT_PAGE_ERASE 0x0281 167 #define BCMA_CC_FLASHCTL_AT_BLOCK_ERASE 0x0250 168 #define BCMA_CC_FLASHCTL_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382 169 #define BCMA_CC_FLASHCTL_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385 170 #define BCMA_CC_FLASHCTL_AT_BUF1_LOAD 0x0253 171 #define BCMA_CC_FLASHCTL_AT_BUF2_LOAD 0x0255 172 #define BCMA_CC_FLASHCTL_AT_BUF1_COMPARE 0x0260 173 #define BCMA_CC_FLASHCTL_AT_BUF2_COMPARE 0x0261 174 #define BCMA_CC_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 175 #define BCMA_CC_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 176 #define BCMA_CC_FLASHADDR 0x0044 177 #define BCMA_CC_FLASHDATA 0x0048 178 /* Status register bits for ST flashes */ 179 #define BCMA_CC_FLASHDATA_ST_WIP 0x01 /* Write In Progress */ 180 #define BCMA_CC_FLASHDATA_ST_WEL 0x02 /* Write Enable Latch */ 181 #define BCMA_CC_FLASHDATA_ST_BP_MASK 0x1c /* Block Protect */ 182 #define BCMA_CC_FLASHDATA_ST_BP_SHIFT 2 183 #define BCMA_CC_FLASHDATA_ST_SRWD 0x80 /* Status Register Write Disable */ 184 /* Status register bits for Atmel flashes */ 185 #define BCMA_CC_FLASHDATA_AT_READY 0x80 186 #define BCMA_CC_FLASHDATA_AT_MISMATCH 0x40 187 #define BCMA_CC_FLASHDATA_AT_ID_MASK 0x38 188 #define BCMA_CC_FLASHDATA_AT_ID_SHIFT 3 189 #define BCMA_CC_BCAST_ADDR 0x0050 190 #define BCMA_CC_BCAST_DATA 0x0054 191 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ 192 #define BCMA_CC_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ 193 #define BCMA_CC_GPIOIN 0x0060 194 #define BCMA_CC_GPIOOUT 0x0064 195 #define BCMA_CC_GPIOOUTEN 0x0068 196 #define BCMA_CC_GPIOCTL 0x006C 197 #define BCMA_CC_GPIOPOL 0x0070 198 #define BCMA_CC_GPIOIRQ 0x0074 199 #define BCMA_CC_WATCHDOG 0x0080 200 #define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ 201 #define BCMA_CC_GPIOTIMER_OFFTIME 0x0000FFFF 202 #define BCMA_CC_GPIOTIMER_OFFTIME_SHIFT 0 203 #define BCMA_CC_GPIOTIMER_ONTIME 0xFFFF0000 204 #define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16 205 #define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ 206 #define BCMA_CC_CLOCK_N 0x0090 207 #define BCMA_CC_CLOCK_SB 0x0094 208 #define BCMA_CC_CLOCK_PCI 0x0098 209 #define BCMA_CC_CLOCK_M2 0x009C 210 #define BCMA_CC_CLOCK_MIPS 0x00A0 211 #define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */ 212 #define BCMA_CC_CLKDIV_SFLASH 0x0F000000 213 #define BCMA_CC_CLKDIV_SFLASH_SHIFT 24 214 #define BCMA_CC_CLKDIV_OTP 0x000F0000 215 #define BCMA_CC_CLKDIV_OTP_SHIFT 16 216 #define BCMA_CC_CLKDIV_JTAG 0x00000F00 217 #define BCMA_CC_CLKDIV_JTAG_SHIFT 8 218 #define BCMA_CC_CLKDIV_UART 0x000000FF 219 #define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */ 220 #define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */ 221 #define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ 222 #define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ 223 #define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */ 224 #define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */ 225 #define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */ 226 #define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */ 227 #define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ 228 #define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ 229 #define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ 230 #define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ 231 #define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ 232 #define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ 233 #define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ 234 #define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16 235 #define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */ 236 #define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */ 237 #define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */ 238 #define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */ 239 #define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */ 240 #define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */ 241 #define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */ 242 #define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16 243 #define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */ 244 #define BCMA_CC_EROM 0x00FC 245 #define BCMA_CC_PCMCIA_CFG 0x0100 246 #define BCMA_CC_PCMCIA_MEMWAIT 0x0104 247 #define BCMA_CC_PCMCIA_ATTRWAIT 0x0108 248 #define BCMA_CC_PCMCIA_IOWAIT 0x010C 249 #define BCMA_CC_IDE_CFG 0x0110 250 #define BCMA_CC_IDE_MEMWAIT 0x0114 251 #define BCMA_CC_IDE_ATTRWAIT 0x0118 252 #define BCMA_CC_IDE_IOWAIT 0x011C 253 #define BCMA_CC_PROG_CFG 0x0120 254 #define BCMA_CC_PROG_WAITCNT 0x0124 255 #define BCMA_CC_FLASH_CFG 0x0128 256 #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ 257 #define BCMA_CC_FLASH_WAITCNT 0x012C 258 #define BCMA_CC_SROM_CONTROL 0x0190 259 #define BCMA_CC_SROM_CONTROL_START 0x80000000 260 #define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 261 #define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 262 #define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 263 #define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 264 #define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 265 #define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 266 #define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 267 #define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 268 #define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 269 #define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 270 #define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 271 #define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 272 #define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 273 #define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 274 /* Block 0x140 - 0x190 registers are chipset specific */ 275 #define BCMA_CC_4706_FLASHSCFG 0x18C /* Flash struct configuration */ 276 #define BCMA_CC_4706_FLASHSCFG_MASK 0x000000ff 277 #define BCMA_CC_4706_FLASHSCFG_SF1 0x00000001 /* 2nd serial flash present */ 278 #define BCMA_CC_4706_FLASHSCFG_PF1 0x00000002 /* 2nd parallel flash present */ 279 #define BCMA_CC_4706_FLASHSCFG_SF1_TYPE 0x00000004 /* 2nd serial flash type : 0 : ST, 1 : Atmel */ 280 #define BCMA_CC_4706_FLASHSCFG_NF1 0x00000008 /* 2nd NAND flash present */ 281 #define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK 0x000000f0 282 #define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB 0x00000010 /* 4MB */ 283 #define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB 0x00000020 /* 8MB */ 284 #define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB 0x00000030 /* 16MB */ 285 #define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB 0x00000040 /* 32MB */ 286 #define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB 0x00000050 /* 64MB */ 287 #define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB 0x00000060 /* 128MB */ 288 #define BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB 0x00000070 /* 256MB */ 289 /* NAND flash registers for BCM4706 (corerev = 31) */ 290 #define BCMA_CC_NFLASH_CTL 0x01A0 291 #define BCMA_CC_NFLASH_CTL_ERR 0x08000000 292 #define BCMA_CC_NFLASH_CONF 0x01A4 293 #define BCMA_CC_NFLASH_COL_ADDR 0x01A8 294 #define BCMA_CC_NFLASH_ROW_ADDR 0x01AC 295 #define BCMA_CC_NFLASH_DATA 0x01B0 296 #define BCMA_CC_NFLASH_WAITCNT0 0x01B4 297 /* 0x1E0 is defined as shared BCMA_CLKCTLST */ 298 #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ 299 #define BCMA_CC_UART0_DATA 0x0300 300 #define BCMA_CC_UART0_IMR 0x0304 301 #define BCMA_CC_UART0_FCR 0x0308 302 #define BCMA_CC_UART0_LCR 0x030C 303 #define BCMA_CC_UART0_MCR 0x0310 304 #define BCMA_CC_UART0_LSR 0x0314 305 #define BCMA_CC_UART0_MSR 0x0318 306 #define BCMA_CC_UART0_SCRATCH 0x031C 307 #define BCMA_CC_UART1_DATA 0x0400 308 #define BCMA_CC_UART1_IMR 0x0404 309 #define BCMA_CC_UART1_FCR 0x0408 310 #define BCMA_CC_UART1_LCR 0x040C 311 #define BCMA_CC_UART1_MCR 0x0410 312 #define BCMA_CC_UART1_LSR 0x0414 313 #define BCMA_CC_UART1_MSR 0x0418 314 #define BCMA_CC_UART1_SCRATCH 0x041C 315 /* PMU registers (rev >= 20) */ 316 #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ 317 #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ 318 #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 319 #define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ 320 #define BCMA_CC_PMU_CTL_RES_SHIFT 13 321 #define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ 322 #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 323 #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ 324 #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ 325 #define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ 326 #define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ 327 #define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2 328 #define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ 329 #define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ 330 #define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ 331 #define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ 332 #define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ 333 #define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ 334 #define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ 335 #define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ 336 #define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */ 337 #define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */ 338 #define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */ 339 #define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */ 340 #define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */ 341 #define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ 342 #define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ 343 #define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ 344 #define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ 345 #define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ 346 #define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */ 347 #define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ 348 #define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */ 349 #define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ 350 #define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */ 351 #define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */ 352 #define BCMA_CC_CHIPCTL_ADDR 0x0650 353 #define BCMA_CC_CHIPCTL_DATA 0x0654 354 #define BCMA_CC_REGCTL_ADDR 0x0658 355 #define BCMA_CC_REGCTL_DATA 0x065C 356 #define BCMA_CC_PLLCTL_ADDR 0x0660 357 #define BCMA_CC_PLLCTL_DATA 0x0664 358 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ 359 /* NAND flash MLC controller registers (corerev >= 38) */ 360 #define BCMA_CC_NAND_REVISION 0x0C00 361 #define BCMA_CC_NAND_CMD_START 0x0C04 362 #define BCMA_CC_NAND_CMD_ADDR_X 0x0C08 363 #define BCMA_CC_NAND_CMD_ADDR 0x0C0C 364 #define BCMA_CC_NAND_CMD_END_ADDR 0x0C10 365 #define BCMA_CC_NAND_CS_NAND_SELECT 0x0C14 366 #define BCMA_CC_NAND_CS_NAND_XOR 0x0C18 367 #define BCMA_CC_NAND_SPARE_RD0 0x0C20 368 #define BCMA_CC_NAND_SPARE_RD4 0x0C24 369 #define BCMA_CC_NAND_SPARE_RD8 0x0C28 370 #define BCMA_CC_NAND_SPARE_RD12 0x0C2C 371 #define BCMA_CC_NAND_SPARE_WR0 0x0C30 372 #define BCMA_CC_NAND_SPARE_WR4 0x0C34 373 #define BCMA_CC_NAND_SPARE_WR8 0x0C38 374 #define BCMA_CC_NAND_SPARE_WR12 0x0C3C 375 #define BCMA_CC_NAND_ACC_CONTROL 0x0C40 376 #define BCMA_CC_NAND_CONFIG 0x0C48 377 #define BCMA_CC_NAND_TIMING_1 0x0C50 378 #define BCMA_CC_NAND_TIMING_2 0x0C54 379 #define BCMA_CC_NAND_SEMAPHORE 0x0C58 380 #define BCMA_CC_NAND_DEVID 0x0C60 381 #define BCMA_CC_NAND_DEVID_X 0x0C64 382 #define BCMA_CC_NAND_BLOCK_LOCK_STATUS 0x0C68 383 #define BCMA_CC_NAND_INTFC_STATUS 0x0C6C 384 #define BCMA_CC_NAND_ECC_CORR_ADDR_X 0x0C70 385 #define BCMA_CC_NAND_ECC_CORR_ADDR 0x0C74 386 #define BCMA_CC_NAND_ECC_UNC_ADDR_X 0x0C78 387 #define BCMA_CC_NAND_ECC_UNC_ADDR 0x0C7C 388 #define BCMA_CC_NAND_READ_ERROR_COUNT 0x0C80 389 #define BCMA_CC_NAND_CORR_STAT_THRESHOLD 0x0C84 390 #define BCMA_CC_NAND_READ_ADDR_X 0x0C90 391 #define BCMA_CC_NAND_READ_ADDR 0x0C94 392 #define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X 0x0C98 393 #define BCMA_CC_NAND_PAGE_PROGRAM_ADDR 0x0C9C 394 #define BCMA_CC_NAND_COPY_BACK_ADDR_X 0x0CA0 395 #define BCMA_CC_NAND_COPY_BACK_ADDR 0x0CA4 396 #define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X 0x0CA8 397 #define BCMA_CC_NAND_BLOCK_ERASE_ADDR 0x0CAC 398 #define BCMA_CC_NAND_INV_READ_ADDR_X 0x0CB0 399 #define BCMA_CC_NAND_INV_READ_ADDR 0x0CB4 400 #define BCMA_CC_NAND_BLK_WR_PROTECT 0x0CC0 401 #define BCMA_CC_NAND_ACC_CONTROL_CS1 0x0CD0 402 #define BCMA_CC_NAND_CONFIG_CS1 0x0CD4 403 #define BCMA_CC_NAND_TIMING_1_CS1 0x0CD8 404 #define BCMA_CC_NAND_TIMING_2_CS1 0x0CDC 405 #define BCMA_CC_NAND_SPARE_RD16 0x0D30 406 #define BCMA_CC_NAND_SPARE_RD20 0x0D34 407 #define BCMA_CC_NAND_SPARE_RD24 0x0D38 408 #define BCMA_CC_NAND_SPARE_RD28 0x0D3C 409 #define BCMA_CC_NAND_CACHE_ADDR 0x0D40 410 #define BCMA_CC_NAND_CACHE_DATA 0x0D44 411 #define BCMA_CC_NAND_CTRL_CONFIG 0x0D48 412 #define BCMA_CC_NAND_CTRL_STATUS 0x0D4C 413 414 /* Divider allocation in 4716/47162/5356 */ 415 #define BCMA_CC_PMU5_MAINPLL_CPU 1 416 #define BCMA_CC_PMU5_MAINPLL_MEM 2 417 #define BCMA_CC_PMU5_MAINPLL_SSB 3 418 419 /* PLL usage in 4716/47162 */ 420 #define BCMA_CC_PMU4716_MAINPLL_PLL0 12 421 422 /* PLL usage in 5356/5357 */ 423 #define BCMA_CC_PMU5356_MAINPLL_PLL0 0 424 #define BCMA_CC_PMU5357_MAINPLL_PLL0 0 425 426 /* 4706 PMU */ 427 #define BCMA_CC_PMU4706_MAINPLL_PLL0 0 428 #define BCMA_CC_PMU6_4706_PROCPLL_OFF 4 /* The CPU PLL */ 429 #define BCMA_CC_PMU6_4706_PROC_P2DIV_MASK 0x000f0000 430 #define BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT 16 431 #define BCMA_CC_PMU6_4706_PROC_P1DIV_MASK 0x0000f000 432 #define BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT 12 433 #define BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK 0x00000ff8 434 #define BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT 3 435 #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK 0x00000007 436 #define BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT 0 437 438 /* ALP clock on pre-PMU chips */ 439 #define BCMA_CC_PMU_ALP_CLOCK 20000000 440 /* HT clock for systems with PMU-enabled chipcommon */ 441 #define BCMA_CC_PMU_HT_CLOCK 80000000 442 443 /* PMU rev 5 (& 6) */ 444 #define BCMA_CC_PPL_P1P2_OFF 0 445 #define BCMA_CC_PPL_P1_MASK 0x0f000000 446 #define BCMA_CC_PPL_P1_SHIFT 24 447 #define BCMA_CC_PPL_P2_MASK 0x00f00000 448 #define BCMA_CC_PPL_P2_SHIFT 20 449 #define BCMA_CC_PPL_M14_OFF 1 450 #define BCMA_CC_PPL_MDIV_MASK 0x000000ff 451 #define BCMA_CC_PPL_MDIV_WIDTH 8 452 #define BCMA_CC_PPL_NM5_OFF 2 453 #define BCMA_CC_PPL_NDIV_MASK 0xfff00000 454 #define BCMA_CC_PPL_NDIV_SHIFT 20 455 #define BCMA_CC_PPL_FMAB_OFF 3 456 #define BCMA_CC_PPL_MRAT_MASK 0xf0000000 457 #define BCMA_CC_PPL_MRAT_SHIFT 28 458 #define BCMA_CC_PPL_ABRAT_MASK 0x08000000 459 #define BCMA_CC_PPL_ABRAT_SHIFT 27 460 #define BCMA_CC_PPL_FDIV_MASK 0x07ffffff 461 #define BCMA_CC_PPL_PLLCTL_OFF 4 462 #define BCMA_CC_PPL_PCHI_OFF 5 463 #define BCMA_CC_PPL_PCHI_MASK 0x0000003f 464 465 #define BCMA_CC_PMU_PLL_CTL0 0 466 #define BCMA_CC_PMU_PLL_CTL1 1 467 #define BCMA_CC_PMU_PLL_CTL2 2 468 #define BCMA_CC_PMU_PLL_CTL3 3 469 #define BCMA_CC_PMU_PLL_CTL4 4 470 #define BCMA_CC_PMU_PLL_CTL5 5 471 472 #define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK 0x00f00000 473 #define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT 20 474 475 #define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK 0x1ff00000 476 #define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT 20 477 478 /* BCM4331 ChipControl numbers. */ 479 #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ 480 #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ 481 #define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ 482 #define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ 483 #define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ 484 #define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ 485 #define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ 486 #define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ 487 #define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ 488 #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ 489 #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ 490 #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ 491 #define BCMA_CHIPCTL_4331_EXTPA_EN2 BIT(12) /* 0 ext pa disable, 1 ext pa enabled */ 492 #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ 493 #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ 494 495 /* 43224 chip-specific ChipControl register bits */ 496 #define BCMA_CCTRL_43224_GPIO_TOGGLE 0x8000 /* gpio[3:0] pins as btcoex or s/w gpio */ 497 #define BCMA_CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength */ 498 #define BCMA_CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 12 mA drive strength for later 43224s */ 499 500 /* 4313 Chip specific ChipControl register bits */ 501 #define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ 502 503 /* BCM5357 ChipControl register bits */ 504 #define BCMA_CHIPCTL_5357_EXTPA BIT(14) 505 #define BCMA_CHIPCTL_5357_ANT_MUX_2O3 BIT(15) 506 #define BCMA_CHIPCTL_5357_NFLASH BIT(16) 507 #define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE BIT(18) 508 #define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE BIT(19) 509 510 /* Data for the PMU, if available. 511 * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) 512 */ 513 struct bcma_chipcommon_pmu { 514 u8 rev; /* PMU revision */ 515 u32 crystalfreq; /* The active crystal frequency (in kHz) */ 516 }; 517 518 #ifdef CONFIG_BCMA_DRIVER_MIPS 519 struct bcma_pflash { 520 bool present; 521 u8 buswidth; 522 u32 window; 523 u32 window_size; 524 }; 525 526 #ifdef CONFIG_BCMA_SFLASH 527 struct bcma_sflash { 528 bool present; 529 u32 window; 530 u32 blocksize; 531 u16 numblocks; 532 u32 size; 533 534 struct mtd_info *mtd; 535 void *priv; 536 }; 537 #endif 538 539 #ifdef CONFIG_BCMA_NFLASH 540 struct mtd_info; 541 542 struct bcma_nflash { 543 bool present; 544 bool boot; /* This is the flash the SoC boots from */ 545 546 struct mtd_info *mtd; 547 }; 548 #endif 549 550 struct bcma_serial_port { 551 void *regs; 552 unsigned long clockspeed; 553 unsigned int irq; 554 unsigned int baud_base; 555 unsigned int reg_shift; 556 }; 557 #endif /* CONFIG_BCMA_DRIVER_MIPS */ 558 559 struct bcma_drv_cc { 560 struct bcma_device *core; 561 u32 status; 562 u32 capabilities; 563 u32 capabilities_ext; 564 u8 setup_done:1; 565 u8 early_setup_done:1; 566 /* Fast Powerup Delay constant */ 567 u16 fast_pwrup_delay; 568 struct bcma_chipcommon_pmu pmu; 569 #ifdef CONFIG_BCMA_DRIVER_MIPS 570 struct bcma_pflash pflash; 571 #ifdef CONFIG_BCMA_SFLASH 572 struct bcma_sflash sflash; 573 #endif 574 #ifdef CONFIG_BCMA_NFLASH 575 struct bcma_nflash nflash; 576 #endif 577 578 int nr_serial_ports; 579 struct bcma_serial_port serial_ports[4]; 580 #endif /* CONFIG_BCMA_DRIVER_MIPS */ 581 u32 ticks_per_ms; 582 struct platform_device *watchdog; 583 584 /* Lock for GPIO register access. */ 585 spinlock_t gpio_lock; 586 #ifdef CONFIG_BCMA_DRIVER_GPIO 587 struct gpio_chip gpio; 588 #endif 589 }; 590 591 /* Register access */ 592 #define bcma_cc_read32(cc, offset) \ 593 bcma_read32((cc)->core, offset) 594 #define bcma_cc_write32(cc, offset, val) \ 595 bcma_write32((cc)->core, offset, val) 596 597 #define bcma_cc_mask32(cc, offset, mask) \ 598 bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask)) 599 #define bcma_cc_set32(cc, offset, set) \ 600 bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set)) 601 #define bcma_cc_maskset32(cc, offset, mask, set) \ 602 bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) 603 604 extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); 605 extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); 606 607 extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); 608 extern void bcma_chipco_resume(struct bcma_drv_cc *cc); 609 610 void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); 611 612 extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); 613 614 extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc); 615 616 void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); 617 618 u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask); 619 620 /* Chipcommon GPIO pin access. */ 621 u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask); 622 u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value); 623 u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value); 624 u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); 625 u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); 626 u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); 627 u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value); 628 u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value); 629 630 /* PMU support */ 631 extern void bcma_pmu_init(struct bcma_drv_cc *cc); 632 extern void bcma_pmu_early_init(struct bcma_drv_cc *cc); 633 634 extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, 635 u32 value); 636 extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, 637 u32 mask, u32 set); 638 extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, 639 u32 offset, u32 mask, u32 set); 640 extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, 641 u32 offset, u32 mask, u32 set); 642 extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid); 643 644 extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc); 645 646 #endif /* LINUX_BCMA_DRIVER_CC_H_ */ 647