1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * linux/include/amba/bus.h 4 * 5 * This device type deals with ARM PrimeCells and anything else that 6 * presents a proper CID (0xB105F00D) at the end of the I/O register 7 * region or that is derived from a PrimeCell. 8 * 9 * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. 10 */ 11 #ifndef ASMARM_AMBA_H 12 #define ASMARM_AMBA_H 13 14 #include <linux/clk.h> 15 #include <linux/device.h> 16 #include <linux/mod_devicetable.h> 17 #include <linux/err.h> 18 #include <linux/resource.h> 19 #include <linux/regulator/consumer.h> 20 21 #define AMBA_NR_IRQS 9 22 #define AMBA_CID 0xb105f00d 23 #define CORESIGHT_CID 0xb105900d 24 25 /* 26 * CoreSight Architecture specification updates the ID specification 27 * for components on the AMBA bus. (ARM IHI 0029E) 28 * 29 * Bits 15:12 of the CID are the device class. 30 * 31 * Class 0xF remains for PrimeCell and legacy components. (AMBA_CID above) 32 * Class 0x9 defines the component as CoreSight (CORESIGHT_CID above) 33 * Class 0x0, 0x1, 0xB, 0xE define components that do not have driver support 34 * at present. 35 * Class 0x2-0x8,0xA and 0xD-0xD are presently reserved. 36 * 37 * Remaining CID bits stay as 0xb105-00d 38 */ 39 40 /** 41 * Class 0x9 components use additional values to form a Unique Component 42 * Identifier (UCI), where peripheral ID values are identical for different 43 * components. Passed to the amba bus code from the component driver via 44 * the amba_id->data pointer. 45 * @devarch : coresight devarch register value 46 * @devarch_mask: mask bits used for matching. 0 indicates UCI not used. 47 * @devtype : coresight device type value 48 * @data : additional driver data. As we have usurped the original 49 * pointer some devices may still need additional data 50 */ 51 struct amba_cs_uci_id { 52 unsigned int devarch; 53 unsigned int devarch_mask; 54 unsigned int devtype; 55 void *data; 56 }; 57 58 /* define offsets for registers used by UCI */ 59 #define UCI_REG_DEVTYPE_OFFSET 0xFCC 60 #define UCI_REG_DEVARCH_OFFSET 0xFBC 61 62 struct clk; 63 64 struct amba_device { 65 struct device dev; 66 struct resource res; 67 struct clk *pclk; 68 struct device_dma_parameters dma_parms; 69 unsigned int periphid; 70 unsigned int cid; 71 struct amba_cs_uci_id uci; 72 unsigned int irq[AMBA_NR_IRQS]; 73 char *driver_override; 74 }; 75 76 struct amba_driver { 77 struct device_driver drv; 78 int (*probe)(struct amba_device *, const struct amba_id *); 79 void (*remove)(struct amba_device *); 80 void (*shutdown)(struct amba_device *); 81 const struct amba_id *id_table; 82 }; 83 84 /* 85 * Constants for the designer field of the Peripheral ID register. When bit 7 86 * is set to '1', bits [6:0] should be the JEP106 manufacturer identity code. 87 */ 88 enum amba_vendor { 89 AMBA_VENDOR_ARM = 0x41, 90 AMBA_VENDOR_ST = 0x80, 91 AMBA_VENDOR_QCOM = 0x51, 92 AMBA_VENDOR_LSI = 0xb6, 93 }; 94 95 extern struct bus_type amba_bustype; 96 97 #define to_amba_device(d) container_of(d, struct amba_device, dev) 98 99 #define amba_get_drvdata(d) dev_get_drvdata(&d->dev) 100 #define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p) 101 102 #ifdef CONFIG_ARM_AMBA 103 int amba_driver_register(struct amba_driver *); 104 void amba_driver_unregister(struct amba_driver *); 105 #else 106 static inline int amba_driver_register(struct amba_driver *drv) 107 { 108 return -EINVAL; 109 } 110 static inline void amba_driver_unregister(struct amba_driver *drv) 111 { 112 } 113 #endif 114 115 struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t); 116 void amba_device_put(struct amba_device *); 117 int amba_device_add(struct amba_device *, struct resource *); 118 int amba_device_register(struct amba_device *, struct resource *); 119 void amba_device_unregister(struct amba_device *); 120 struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); 121 int amba_request_regions(struct amba_device *, const char *); 122 void amba_release_regions(struct amba_device *); 123 124 static inline int amba_pclk_enable(struct amba_device *dev) 125 { 126 return clk_enable(dev->pclk); 127 } 128 129 static inline void amba_pclk_disable(struct amba_device *dev) 130 { 131 clk_disable(dev->pclk); 132 } 133 134 static inline int amba_pclk_prepare(struct amba_device *dev) 135 { 136 return clk_prepare(dev->pclk); 137 } 138 139 static inline void amba_pclk_unprepare(struct amba_device *dev) 140 { 141 clk_unprepare(dev->pclk); 142 } 143 144 /* Some drivers don't use the struct amba_device */ 145 #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff) 146 #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f) 147 #define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff) 148 #define AMBA_PART_BITS(a) ((a) & 0xfff) 149 150 #define amba_config(d) AMBA_CONFIG_BITS((d)->periphid) 151 #define amba_rev(d) AMBA_REV_BITS((d)->periphid) 152 #define amba_manf(d) AMBA_MANF_BITS((d)->periphid) 153 #define amba_part(d) AMBA_PART_BITS((d)->periphid) 154 155 #define __AMBA_DEV(busid, data, mask) \ 156 { \ 157 .coherent_dma_mask = mask, \ 158 .init_name = busid, \ 159 .platform_data = data, \ 160 } 161 162 /* 163 * APB devices do not themselves have the ability to address memory, 164 * so DMA masks should be zero (much like USB peripheral devices.) 165 * The DMA controller DMA masks should be used instead (much like 166 * USB host controllers in conventional PCs.) 167 */ 168 #define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \ 169 struct amba_device name##_device = { \ 170 .dev = __AMBA_DEV(busid, data, 0), \ 171 .res = DEFINE_RES_MEM(base, SZ_4K), \ 172 .irq = irqs, \ 173 .periphid = id, \ 174 } 175 176 /* 177 * AHB devices are DMA capable, so set their DMA masks 178 */ 179 #define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \ 180 struct amba_device name##_device = { \ 181 .dev = __AMBA_DEV(busid, data, ~0ULL), \ 182 .res = DEFINE_RES_MEM(base, SZ_4K), \ 183 .irq = irqs, \ 184 .periphid = id, \ 185 } 186 187 /* 188 * module_amba_driver() - Helper macro for drivers that don't do anything 189 * special in module init/exit. This eliminates a lot of boilerplate. Each 190 * module may only use this macro once, and calling it replaces module_init() 191 * and module_exit() 192 */ 193 #define module_amba_driver(__amba_drv) \ 194 module_driver(__amba_drv, amba_driver_register, amba_driver_unregister) 195 196 /* 197 * builtin_amba_driver() - Helper macro for drivers that don't do anything 198 * special in driver initcall. This eliminates a lot of boilerplate. Each 199 * driver may only use this macro once, and calling it replaces the instance 200 * device_initcall(). 201 */ 202 #define builtin_amba_driver(__amba_drv) \ 203 builtin_driver(__amba_drv, amba_driver_register) 204 205 #endif 206