1# SPDX-License-Identifier: GPL-2.0 2 3menuconfig TYPEC 4 tristate "USB Type-C Support" 5 help 6 USB Type-C Specification defines a cable and connector for USB where 7 only one type of plug is supported on both ends, i.e. there will not 8 be Type-A plug on one end of the cable and Type-B plug on the other. 9 Determination of the host-to-device relationship happens through a 10 specific Configuration Channel (CC) which goes through the USB Type-C 11 cable. The Configuration Channel may also be used to detect optional 12 Accessory Modes - Analog Audio and Debug - and if USB Power Delivery 13 is supported, the Alternate Modes, where the connector is used for 14 something else then USB communication. 15 16 USB Power Delivery Specification defines a protocol that can be used 17 to negotiate the voltage and current levels with the connected 18 partners. USB Power Delivery allows higher voltages then the normal 19 5V, up to 20V, and current up to 5A over the cable. The USB Power 20 Delivery protocol is also used to negotiate the optional Alternate 21 Modes when they are supported. USB Power Delivery does not depend on 22 USB Type-C connector, however it is mostly used together with USB 23 Type-C connectors. 24 25 USB Type-C and USB Power Delivery Specifications define a set of state 26 machines that need to be implemented in either software or firmware. 27 Simple USB Type-C PHYs, for example USB Type-C Port Controller 28 Interface Specification compliant "Port Controllers" need the state 29 machines to be handled in the OS, but stand-alone USB Type-C and Power 30 Delivery controllers handle the state machines inside their firmware. 31 The USB Type-C and Power Delivery controllers usually function 32 autonomously, and do not necessarily require drivers. 33 34 Enable this configurations option if you have USB Type-C connectors on 35 your system and 1) you know your USB Type-C hardware requires OS 36 control (a driver) to function, or 2) if you need to be able to read 37 the status of the USB Type-C ports in your system, or 3) if you need 38 to be able to swap the power role (decide are you supplying or 39 consuming power over the cable) or data role (host or device) when 40 both roles are supported. 41 42 For more information, see the kernel documentation for USB Type-C 43 Connector Class API (Documentation/driver-api/usb/typec.rst) 44 <https://www.kernel.org/doc/html/latest/driver-api/usb/typec.html> 45 and ABI (Documentation/ABI/testing/sysfs-class-typec). 46 47if TYPEC 48 49source "drivers/usb/typec/tcpm/Kconfig" 50 51source "drivers/usb/typec/ucsi/Kconfig" 52 53source "drivers/usb/typec/tipd/Kconfig" 54 55config TYPEC_RT1719 56 tristate "Richtek RT1719 Sink Only Type-C controller driver" 57 depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH 58 depends on I2C 59 select REGMAP_I2C 60 help 61 Say Y or M here if your system has Richtek RT1719 sink only 62 Type-C port controller driver. 63 64 If you choose to build this driver as a dynamically linked module, the 65 module will be called rt1719.ko 66 67config TYPEC_HD3SS3220 68 tristate "TI HD3SS3220 Type-C DRP Port controller driver" 69 depends on I2C 70 depends on USB_ROLE_SWITCH 71 help 72 Say Y or M here if your system has TI HD3SS3220 Type-C DRP Port 73 controller driver. 74 75 If you choose to build this driver as a dynamically linked module, the 76 module will be called hd3ss3220.ko. 77 78config TYPEC_STUSB160X 79 tristate "STMicroelectronics STUSB160x Type-C controller driver" 80 depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH 81 depends on I2C 82 select REGMAP_I2C 83 help 84 Say Y or M here if your system has STMicroelectronics STUSB160x 85 Type-C port controller. 86 87 If you choose to build this driver as a dynamically linked module, the 88 module will be called stusb160x.ko. 89 90config TYPEC_QCOM_PMIC 91 tristate "Qualcomm PMIC USB Type-C driver" 92 depends on ARCH_QCOM || COMPILE_TEST 93 depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH 94 help 95 Driver for supporting role switch over the Qualcomm PMIC. This will 96 handle the USB Type-C role and orientation detection reported by the 97 QCOM PMIC if the PMIC has the capability to handle USB Type-C 98 detection. 99 100 It will also enable the VBUS output to connected devices when a 101 DFP connection is made. 102 103config TYPEC_WUSB3801 104 tristate "Willsemi WUSB3801 Type-C port controller driver" 105 depends on I2C 106 select REGMAP_I2C 107 help 108 Say Y or M here if your system has a WUSB3801 Type-C port controller. 109 110 If you choose to build this driver as a dynamically linked module, the 111 module will be called wusb3801.ko. 112 113source "drivers/usb/typec/mux/Kconfig" 114 115source "drivers/usb/typec/altmodes/Kconfig" 116 117endif # TYPEC 118