1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * host.c - ChipIdea USB host controller driver 4 * 5 * Copyright (c) 2012 Intel Corporation 6 * 7 * Author: Alexander Shishkin 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/io.h> 12 #include <linux/usb.h> 13 #include <linux/usb/hcd.h> 14 #include <linux/usb/chipidea.h> 15 #include <linux/regulator/consumer.h> 16 #include <linux/pinctrl/consumer.h> 17 18 #include "../host/ehci.h" 19 20 #include "ci.h" 21 #include "bits.h" 22 #include "host.h" 23 24 static struct hc_driver __read_mostly ci_ehci_hc_driver; 25 static int (*orig_bus_suspend)(struct usb_hcd *hcd); 26 27 struct ehci_ci_priv { 28 struct regulator *reg_vbus; 29 }; 30 31 static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) 32 { 33 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 34 struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv; 35 struct device *dev = hcd->self.controller; 36 struct ci_hdrc *ci = dev_get_drvdata(dev); 37 int ret = 0; 38 int port = HCS_N_PORTS(ehci->hcs_params); 39 40 if (priv->reg_vbus) { 41 if (port > 1) { 42 dev_warn(dev, 43 "Not support multi-port regulator control\n"); 44 return 0; 45 } 46 if (enable) 47 ret = regulator_enable(priv->reg_vbus); 48 else 49 ret = regulator_disable(priv->reg_vbus); 50 if (ret) { 51 dev_err(dev, 52 "Failed to %s vbus regulator, ret=%d\n", 53 enable ? "enable" : "disable", ret); 54 return ret; 55 } 56 } 57 58 if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) { 59 /* 60 * Marvell 28nm HSIC PHY requires forcing the port to HS mode. 61 * As HSIC is always HS, this should be safe for others. 62 */ 63 hw_port_test_set(ci, 5); 64 hw_port_test_set(ci, 0); 65 } 66 return 0; 67 }; 68 69 static int ehci_ci_reset(struct usb_hcd *hcd) 70 { 71 struct device *dev = hcd->self.controller; 72 struct ci_hdrc *ci = dev_get_drvdata(dev); 73 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 74 int ret; 75 76 ret = ehci_setup(hcd); 77 if (ret) 78 return ret; 79 80 ehci->need_io_watchdog = 0; 81 82 if (ci->platdata->notify_event) { 83 ret = ci->platdata->notify_event(ci, 84 CI_HDRC_CONTROLLER_RESET_EVENT); 85 if (ret) 86 return ret; 87 } 88 89 ci_platform_configure(ci); 90 91 return ret; 92 } 93 94 static const struct ehci_driver_overrides ehci_ci_overrides = { 95 .extra_priv_size = sizeof(struct ehci_ci_priv), 96 .port_power = ehci_ci_portpower, 97 .reset = ehci_ci_reset, 98 }; 99 100 static irqreturn_t host_irq(struct ci_hdrc *ci) 101 { 102 return usb_hcd_irq(ci->irq, ci->hcd); 103 } 104 105 static int host_start(struct ci_hdrc *ci) 106 { 107 struct usb_hcd *hcd; 108 struct ehci_hcd *ehci; 109 struct ehci_ci_priv *priv; 110 int ret; 111 112 if (usb_disabled()) 113 return -ENODEV; 114 115 hcd = __usb_create_hcd(&ci_ehci_hc_driver, ci->dev->parent, 116 ci->dev, dev_name(ci->dev), NULL); 117 if (!hcd) 118 return -ENOMEM; 119 120 dev_set_drvdata(ci->dev, ci); 121 hcd->rsrc_start = ci->hw_bank.phys; 122 hcd->rsrc_len = ci->hw_bank.size; 123 hcd->regs = ci->hw_bank.abs; 124 hcd->has_tt = 1; 125 126 hcd->power_budget = ci->platdata->power_budget; 127 hcd->tpl_support = ci->platdata->tpl_support; 128 if (ci->phy || ci->usb_phy) { 129 hcd->skip_phy_initialization = 1; 130 if (ci->usb_phy) 131 hcd->usb_phy = ci->usb_phy; 132 } 133 134 ehci = hcd_to_ehci(hcd); 135 ehci->caps = ci->hw_bank.cap; 136 ehci->has_hostpc = ci->hw_bank.lpm; 137 ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; 138 ehci->imx28_write_fix = ci->imx28_write_fix; 139 140 priv = (struct ehci_ci_priv *)ehci->priv; 141 priv->reg_vbus = NULL; 142 143 if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { 144 if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) { 145 ret = regulator_enable(ci->platdata->reg_vbus); 146 if (ret) { 147 dev_err(ci->dev, 148 "Failed to enable vbus regulator, ret=%d\n", 149 ret); 150 goto put_hcd; 151 } 152 } else { 153 priv->reg_vbus = ci->platdata->reg_vbus; 154 } 155 } 156 157 if (ci->platdata->pins_host) 158 pinctrl_select_state(ci->platdata->pctl, 159 ci->platdata->pins_host); 160 161 ret = usb_add_hcd(hcd, 0, 0); 162 if (ret) { 163 goto disable_reg; 164 } else { 165 struct usb_otg *otg = &ci->otg; 166 167 ci->hcd = hcd; 168 169 if (ci_otg_is_fsm_mode(ci)) { 170 otg->host = &hcd->self; 171 hcd->self.otg_port = 1; 172 } 173 174 if (ci->platdata->notify_event && 175 (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC)) 176 ci->platdata->notify_event 177 (ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT); 178 } 179 180 return ret; 181 182 disable_reg: 183 if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && 184 (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) 185 regulator_disable(ci->platdata->reg_vbus); 186 put_hcd: 187 usb_put_hcd(hcd); 188 189 return ret; 190 } 191 192 static void host_stop(struct ci_hdrc *ci) 193 { 194 struct usb_hcd *hcd = ci->hcd; 195 196 if (hcd) { 197 if (ci->platdata->notify_event) 198 ci->platdata->notify_event(ci, 199 CI_HDRC_CONTROLLER_STOPPED_EVENT); 200 usb_remove_hcd(hcd); 201 ci->role = CI_ROLE_END; 202 synchronize_irq(ci->irq); 203 usb_put_hcd(hcd); 204 if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && 205 (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) 206 regulator_disable(ci->platdata->reg_vbus); 207 } 208 ci->hcd = NULL; 209 ci->otg.host = NULL; 210 211 if (ci->platdata->pins_host && ci->platdata->pins_default) 212 pinctrl_select_state(ci->platdata->pctl, 213 ci->platdata->pins_default); 214 } 215 216 217 void ci_hdrc_host_destroy(struct ci_hdrc *ci) 218 { 219 if (ci->role == CI_ROLE_HOST && ci->hcd) 220 host_stop(ci); 221 } 222 223 static int ci_ehci_bus_suspend(struct usb_hcd *hcd) 224 { 225 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 226 struct device *dev = hcd->self.controller; 227 struct ci_hdrc *ci = dev_get_drvdata(dev); 228 int port; 229 u32 tmp; 230 231 int ret = orig_bus_suspend(hcd); 232 233 if (ret) 234 return ret; 235 236 port = HCS_N_PORTS(ehci->hcs_params); 237 while (port--) { 238 u32 __iomem *reg = &ehci->regs->port_status[port]; 239 u32 portsc = ehci_readl(ehci, reg); 240 241 if (portsc & PORT_CONNECT) { 242 /* 243 * For chipidea, the resume signal will be ended 244 * automatically, so for remote wakeup case, the 245 * usbcmd.rs may not be set before the resume has 246 * ended if other resume paths consumes too much 247 * time (~24ms), in that case, the SOF will not 248 * send out within 3ms after resume ends, then the 249 * high speed device will enter full speed mode. 250 */ 251 252 tmp = ehci_readl(ehci, &ehci->regs->command); 253 tmp |= CMD_RUN; 254 ehci_writel(ehci, tmp, &ehci->regs->command); 255 /* 256 * It needs a short delay between set RS bit and PHCD. 257 */ 258 usleep_range(150, 200); 259 /* 260 * Need to clear WKCN and WKOC for imx HSIC, 261 * otherwise, there will be wakeup event. 262 */ 263 if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { 264 tmp = ehci_readl(ehci, reg); 265 tmp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); 266 ehci_writel(ehci, tmp, reg); 267 } 268 269 break; 270 } 271 } 272 273 return 0; 274 } 275 276 int ci_hdrc_host_init(struct ci_hdrc *ci) 277 { 278 struct ci_role_driver *rdrv; 279 280 if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC)) 281 return -ENXIO; 282 283 rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL); 284 if (!rdrv) 285 return -ENOMEM; 286 287 rdrv->start = host_start; 288 rdrv->stop = host_stop; 289 rdrv->irq = host_irq; 290 rdrv->name = "host"; 291 ci->roles[CI_ROLE_HOST] = rdrv; 292 293 return 0; 294 } 295 296 void ci_hdrc_host_driver_init(void) 297 { 298 ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); 299 orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; 300 ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; 301 } 302