1# SPDX-License-Identifier: GPL-2.0 2menuconfig GPIB 3 tristate "Linux GPIB drivers" 4 help 5 Enable support for GPIB cards and dongles for Linux. GPIB 6 is the General Purpose Interface Bus which conforms to the 7 IEEE488 standard. 8 9 This set of drivers can be used with the corresponding user 10 space library that can be found on Sourceforge under linux-gpib. 11 Select the drivers for your hardware from the list. 12 13if GPIB 14 15config GPIB_COMMON 16 tristate "GPIB core" 17 help 18 19 Core common driver for all GPIB drivers. It provides the 20 interface for the userland library 21 22 To compile this driver as a module, choose M here: the module will be 23 called gpib_common 24 25config GPIB_AGILENT_82350B 26 tristate "Agilent 8235xx PCI(e) adapters" 27 depends on PCI 28 select GPIB_COMMON 29 select GPIB_TMS9914 30 help 31 Enable support for HP/Agilent/Keysight boards 32 82350A 33 82350B 34 82351A 35 36 To compile this driver as a module, choose M here: the module will be 37 called agilent_82350b. 38 39config GPIB_AGILENT_82357A 40 tristate "Agilent 82357a/b USB dongles" 41 select GPIB_COMMON 42 depends on USB 43 help 44 Enable support for Agilent/Keysight 82357x USB dongles. 45 46 To compile this driver as a module, choose M here: the module will be 47 called agilent_82357a. 48 49config GPIB_CEC_PCI 50 tristate "CEC PCI board" 51 depends on PCI 52 depends on HAS_IOPORT 53 select GPIB_COMMON 54 select GPIB_NEC7210 55 help 56 Enable support for Capital Equipment Corporation PCI-488 57 and Keithly KPCI-488 boards. 58 59 To compile this driver as a module, choose M here: the module will be 60 called cec_gpib. 61 62config GPIB_NI_PCI_ISA 63 tristate "NI PCI/ISA compatible boards" 64 depends on ISA_BUS || PCI || PCMCIA 65 depends on HAS_IOPORT 66 select GPIB_COMMON 67 select GPIB_NEC7210 68 help 69 Enable support for National Instruments boards based 70 on TNT4882 chips: 71 AT-GPIB (with NAT4882 chip) 72 AT-GPIB (with NEC7210 chip) 73 AT-GPIB/TNT 74 PCI-GPIB 75 PCIe-GPIB 76 PCI-GPIB+ 77 PCM-GPIB 78 PXI-GPIB 79 PCMCIA-GPIB 80 and Capital Equipment Corporation CEC-488 board. 81 82 To compile this driver as a module, choose M here: the module will be 83 called tnt4882. 84 85config GPIB_CB7210 86 tristate "Measurement Computing compatible boards" 87 depends on HAS_IOPORT 88 depends on ISA_BUS || PCI || PCMCIA 89 select GPIB_COMMON 90 select GPIB_NEC7210 91 help 92 Enable support for Measurement Computing (Computer Boards): 93 CPCI_GPIB, ISA-GPIB, ISA-GPIB/LC, PCI-GPIB/1M, PCI-GPIB/300K and 94 PCMCIA-GPIB 95 Quancom PCIGPIB-1 with MC cb7210 chip 96 97 To compile this driver as a module, choose M here: the module will be 98 99config GPIB_NI_USB 100 tristate "NI USB dongles" 101 select GPIB_COMMON 102 depends on USB 103 help 104 Enable support for National Instruments 105 GPIB-USB-B 106 GPIB-USB-HS 107 GPIB-USB-HS+ 108 Keithly 109 KUSB-488 110 KUSB-488A 111 Measurement Computing (Computer Boards) 112 USB-488 113 114 To compile this driver as a module, choose M here: the module will be 115 called ni_usb. 116 117config GPIB_FLUKE 118 tristate "Fluke" 119 depends on OF 120 select GPIB_COMMON 121 select GPIB_NEC7210 122 help 123 GPIB driver for Fluke based cda devices. 124 125 To compile this driver as a module, choose M here: the module will be 126 called fluke_gpib 127 128config GPIB_FMH 129 tristate "FMH FPGA based devices" 130 select GPIB_COMMON 131 select GPIB_NEC7210 132 depends on BROKEN 133 depends on OF && PCI 134 help 135 GPIB driver for fmhess FPGA based devices 136 137 To compile this driver as a module, choose M here: the module will be 138 called fmh_gpib 139 140config GPIB_GPIO 141 tristate "RPi GPIO bitbang" 142 depends on ARCH_BCM2835 || COMPILE_TEST 143 select GPIB_COMMON 144 help 145 GPIB bitbang driver Raspberry Pi GPIO adapters 146 147 To compile this driver as a module, choose M here: the module will be 148 called gpib_bitbang 149 150config GPIB_HP82335 151 tristate "HP82335/HP27209" 152 depends on ISA_BUS 153 select GPIB_COMMON 154 select GPIB_TMS9914 155 help 156 GPIB driver for HP82335 and HP27209 boards 157 158 To compile this driver as a module, choose M here: the module will be 159 called hp82335 160 161 162config GPIB_HP82341 163 tristate "HP82341x" 164 select GPIB_COMMON 165 select GPIB_TMS9914 166 depends on BROKEN 167 depends on ISA_BUS || EISA 168 help 169 GPIB driver for HP82341 A/B/C/D boards 170 171 To compile this driver as a module, choose M here: the module will be 172 called hp82341 173 174config GPIB_INES 175 tristate "INES" 176 depends on PCI || ISA_BUS || PCMCIA 177 depends on HAS_IOPORT 178 select GPIB_COMMON 179 select GPIB_NEC7210 180 help 181 GPIB driver for Ines compatible boards 182 Ines 183 GPIB-HS-NT 184 GPIB for Compact PCI 185 GPIB for PCI 186 GPIB for PCMCIA 187 GPIB PC/104 188 Hameg 189 HO80-2 190 Quancom 191 PCIGPIB-1 based on Ines iGPIB 72010 chip 192 193 To compile this driver as a module, choose M here: the module will be 194 called ines_gpib 195 called cb7210. 196 197config GPIB_PCMCIA 198 bool "PCMCIA/Cardbus support for NI MC and Ines boards" 199 depends on PCCARD && (GPIB_NI_PCI_ISA || GPIB_CB7210 || GPIB_INES) 200 help 201 Enable PCMCIA/CArdbus support for National Instruments, 202 measurement computing boards and Ines boards. 203 204config GPIB_LPVO 205 tristate "LPVO DIY USB GPIB" 206 select GPIB_COMMON 207 depends on USB 208 help 209 Enable support for LPVO Self-made usb-gpib adapter 210 211 To compile this driver as a module, choose M here: the module will be 212 called lpvo_usb_gpib 213 214config GPIB_PC2 215 tristate "PC2 PC2a" 216 depends on ISA_BUS 217 depends on HAS_IOPORT 218 select GPIB_COMMON 219 select GPIB_NEC7210 220 help 221 Enable support for pc2 and pc2a compatible adapters 222 Capital Equipment Corporation PC-488 223 CONTEC GP-IB(PC) 224 Hameg HO80 225 Iotech GP488B 226 Keithly MBC-488 227 Measurement Computing ISA-GPIB-PCA2 228 National Instruments PCII, PCIIa and PCII/IIa 229 230 To compile this driver as a module, choose M here: the module will be 231 called pc2_gpib 232 233 234config GPIB_TMS9914 235 tristate 236 select GPIB_COMMON 237 help 238 Enable support for TMS 9914 chip. 239 240 To compile this driver as a module, choose M here: the module will be 241 called tms9914 242 243config GPIB_NEC7210 244 tristate 245 select GPIB_COMMON 246 help 247 Enable support for NEC 7210 compatible chips. 248 249 To compile this driver as a module, choose M here: the module will be 250 called nec7210 251 252endif # GPIB 253