1# SPDX-License-Identifier: GPL-2.0 2menuconfig GPIB 3 tristate "Linux GPIB drivers" 4 help 5 Enable support for GPIB cards and dongles for Linux. GPIB 6 is the General Purpose Interface Bus which conforms to the 7 IEEE488 standard. 8 9 This set of drivers can be used with the corresponding user 10 space library that can be found on Sourceforge under linux-gpib. 11 Select the drivers for your hardware from the list. 12 13if GPIB 14 15config GPIB_KERNEL_DEBUG 16 bool "GPIB debugging" 17 depends on BROKEN 18 help 19 This is an option for use by developers; most people should 20 say N here. 21 22 It enables gpib core and driver debugging 23 messages to be printed on the console. 24 25config GPIB_COMMON 26 tristate "GPIB core" 27 help 28 29 Core common driver for all GPIB drivers. It provides the 30 interface for the userland library 31 32 To compile this driver as a module, choose M here: the module will be 33 called gpib_common 34 35config GPIB_AGILENT_82350B 36 tristate "Agilent 8235xx PCI(e) adapters" 37 select GPIB_COMMON 38 select GPIB_TMS9914 39 help 40 Enable support for HP/Agilent/Keysight boards 41 82350A 42 82350B 43 82351A 44 45 To compile this driver as a module, choose M here: the module will be 46 called agilent_82350b. 47 48config GPIB_AGILENT_82357A 49 tristate "Agilent 82357a/b USB dongles" 50 select GPIB_COMMON 51 depends on USB 52 help 53 Enable support for Agilent/Keysight 82357x USB dongles. 54 55 To compile this driver as a module, choose M here: the module will be 56 called agilent_82357a. 57 58config GPIB_CEC_PCI 59 tristate "CEC PCI board" 60 select GPIB_COMMON 61 select GPIB_NEC7210 62 help 63 Enable support for Capital Equipment Corporation PCI-488 64 and Keithly KPCI-488 boards. 65 66 To compile this driver as a module, choose M here: the module will be 67 called cec_gpib. 68 69config GPIB_NI_PCI_ISA 70 tristate "NI PCI/ISA compatible boards" 71 select GPIB_COMMON 72 select GPIB_NEC7210 73 help 74 Enable support for National Instruments boards based 75 on TNT4882 chips: 76 AT-GPIB (with NAT4882 chip) 77 AT-GPIB (with NEC7210 chip) 78 AT-GPIB/TNT 79 PCI-GPIB 80 PCIe-GPIB 81 PCI-GPIB+ 82 PCM-GPIB 83 PXI-GPIB 84 PCMCIA-GPIB 85 and Capital Equipment Corporation CEC-488 board. 86 87 To compile this driver as a module, choose M here: the module will be 88 called tnt4882. 89 90config GPIB_CB7210 91 tristate "Measurement Computing compatible boards" 92 select GPIB_COMMON 93 help 94 Enable support for Measurement Computing (Computer Boards): 95 CPCI_GPIB, ISA-GPIB, ISA-GPIB/LC, PCI-GPIB/1M, PCI-GPIB/300K and 96 PCMCIA-GPIB 97 Quancom PCIGPIB-1 with MC cb7210 chip 98 99 To compile this driver as a module, choose M here: the module will be 100 101config GPIB_NI_USB 102 tristate "NI USB dongles" 103 select GPIB_COMMON 104 depends on USB 105 help 106 Enable support for National Instruments 107 GPIB-USB-B 108 GPIB-USB-HS 109 GPIB-USB-HS+ 110 Keithly 111 KUSB-488 112 KUSB-488A 113 Measurement Computing (Computer Boards) 114 USB-488 115 116 To compile this driver as a module, choose M here: the module will be 117 called ni_usb. 118 119config GPIB_FLUKE 120 tristate "Fluke" 121 select GPIB_COMMON 122 select GPIB_NEC7210 123 help 124 GPIB driver for Fluke based cda devices. 125 126 To compile this driver as a module, choose M here: the module will be 127 called fluke_gpib 128 129config GPIB_FMH 130 tristate "FMH FPGA based devices" 131 select GPIB_COMMON 132 select GPIB_NEC7210 133 depends on BROKEN 134 depends on OF && PCI 135 help 136 GPIB driver for fmhess FPGA based devices 137 138 To compile this driver as a module, choose M here: the module will be 139 called fmh_gpib 140 141config GPIB_GPIO 142 tristate "RPi GPIO bitbang" 143 select GPIB_COMMON 144 help 145 GPIB bitbang driver Raspberry Pi GPIO adapters 146 147 To compile this driver as a module, choose M here: the module will be 148 called gpib_bitbang 149 150config GPIB_HP82335 151 tristate "HP82335/HP27209" 152 select GPIB_COMMON 153 select GPIB_TMS9914 154 help 155 GPIB driver for HP82335 and HP27209 boards 156 157 To compile this driver as a module, choose M here: the module will be 158 called hp82335 159 160 161config GPIB_HP82341 162 tristate "HP82341x" 163 select GPIB_COMMON 164 select GPIB_TMS9914 165 depends on BROKEN 166 depends on ISA_BUS || EISA 167 help 168 GPIB driver for HP82341 A/B/C/D boards 169 170 To compile this driver as a module, choose M here: the module will be 171 called hp82341 172 173config GPIB_INES 174 tristate "INES" 175 select GPIB_COMMON 176 select GPIB_NEC7210 177 help 178 GPIB driver for Ines compatible boards 179 Ines 180 GPIB-HS-NT 181 GPIB for Compact PCI 182 GPIB for PCI 183 GPIB for PCMCIA 184 GPIB PC/104 185 Hameg 186 HO80-2 187 Quancom 188 PCIGPIB-1 based on Ines iGPIB 72010 chip 189 190 To compile this driver as a module, choose M here: the module will be 191 called ines_gpib 192 called cb7210. 193 194config GPIB_PCMCIA 195 bool "PCMCIA/Cardbus support for NI MC and Ines boards" 196 depends on PCCARD && (GPIB_NI_PCI_ISA || GPIB_CB7210 || GPIB_INES) 197 help 198 Enable PCMCIA/CArdbus support for National Instruments, 199 measurement computing boards and Ines boards. 200 201config GPIB_LPVO 202 tristate "LPVO DIY USB GPIB" 203 select GPIB_COMMON 204 depends on USB 205 help 206 Enable support for LPVO Self-made usb-gpib adapter 207 208 To compile this driver as a module, choose M here: the module will be 209 called lpvo_usb_gpib 210 211config GPIB_PC2 212 tristate "PC2 PC2a" 213 select GPIB_COMMON 214 select GPIB_NEC7210 215 help 216 Enable support for pc2 and pc2a compatible adapters 217 Capital Equipment Corporation PC-488 218 CONTEC GP-IB(PC) 219 Hameg HO80 220 Iotech GP488B 221 Keithly MBC-488 222 Measurement Computing ISA-GPIB-PCA2 223 National Instruments PCII, PCIIa and PCII/IIa 224 225 To compile this driver as a module, choose M here: the module will be 226 called pc2_gpib 227 228 229config GPIB_TMS9914 230 tristate "TMS 9914 GPIB Chip driver" 231 select GPIB_COMMON 232 help 233 Enable support for TMS 9914 chip. 234 235 To compile this driver as a module, choose M here: the module will be 236 called tms9914 237 238config GPIB_NEC7210 239 tristate "NEC 7210 GPIB Chip driver" 240 select GPIB_COMMON 241 help 242 Enable support for NEC 7210 compatible chips. 243 244 To compile this driver as a module, choose M here: the module will be 245 called nec7210 246 247endif # GPIB 248