1 /* 2 * "RTT as Real Time Clock" driver for AT91SAM9 SoC family 3 * 4 * (C) 2007 Michel Benoit 5 * 6 * Based on rtc-at91rm9200.c by Rick Bronson 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * as published by the Free Software Foundation; either version 11 * 2 of the License, or (at your option) any later version. 12 */ 13 14 #include <linux/clk.h> 15 #include <linux/interrupt.h> 16 #include <linux/ioctl.h> 17 #include <linux/io.h> 18 #include <linux/kernel.h> 19 #include <linux/mfd/syscon.h> 20 #include <linux/module.h> 21 #include <linux/of.h> 22 #include <linux/platform_data/atmel.h> 23 #include <linux/platform_device.h> 24 #include <linux/regmap.h> 25 #include <linux/rtc.h> 26 #include <linux/slab.h> 27 #include <linux/suspend.h> 28 #include <linux/time.h> 29 30 /* 31 * This driver uses two configurable hardware resources that live in the 32 * AT91SAM9 backup power domain (intended to be powered at all times) 33 * to implement the Real Time Clock interfaces 34 * 35 * - A "Real-time Timer" (RTT) counts up in seconds from a base time. 36 * We can't assign the counter value (CRTV) ... but we can reset it. 37 * 38 * - One of the "General Purpose Backup Registers" (GPBRs) holds the 39 * base time, normally an offset from the beginning of the POSIX 40 * epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the 41 * local timezone's offset. 42 * 43 * The RTC's value is the RTT counter plus that offset. The RTC's alarm 44 * is likewise a base (ALMV) plus that offset. 45 * 46 * Not all RTTs will be used as RTCs; some systems have multiple RTTs to 47 * choose from, or a "real" RTC module. All systems have multiple GPBR 48 * registers available, likewise usable for more than "RTC" support. 49 */ 50 51 #define AT91_RTT_MR 0x00 /* Real-time Mode Register */ 52 #define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ 53 #define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ 54 #define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ 55 #define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ 56 57 #define AT91_RTT_AR 0x04 /* Real-time Alarm Register */ 58 #define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ 59 60 #define AT91_RTT_VR 0x08 /* Real-time Value Register */ 61 #define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ 62 63 #define AT91_RTT_SR 0x0c /* Real-time Status Register */ 64 #define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ 65 #define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ 66 67 /* 68 * We store ALARM_DISABLED in ALMV to record that no alarm is set. 69 * It's also the reset value for that field. 70 */ 71 #define ALARM_DISABLED ((u32)~0) 72 73 74 struct sam9_rtc { 75 void __iomem *rtt; 76 struct rtc_device *rtcdev; 77 u32 imr; 78 struct regmap *gpbr; 79 unsigned int gpbr_offset; 80 int irq; 81 struct clk *sclk; 82 bool suspended; 83 unsigned long events; 84 spinlock_t lock; 85 }; 86 87 #define rtt_readl(rtc, field) \ 88 readl((rtc)->rtt + AT91_RTT_ ## field) 89 #define rtt_writel(rtc, field, val) \ 90 writel((val), (rtc)->rtt + AT91_RTT_ ## field) 91 92 static inline unsigned int gpbr_readl(struct sam9_rtc *rtc) 93 { 94 unsigned int val; 95 96 regmap_read(rtc->gpbr, rtc->gpbr_offset, &val); 97 98 return val; 99 } 100 101 static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val) 102 { 103 regmap_write(rtc->gpbr, rtc->gpbr_offset, val); 104 } 105 106 /* 107 * Read current time and date in RTC 108 */ 109 static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm) 110 { 111 struct sam9_rtc *rtc = dev_get_drvdata(dev); 112 u32 secs, secs2; 113 u32 offset; 114 115 /* read current time offset */ 116 offset = gpbr_readl(rtc); 117 if (offset == 0) 118 return -EILSEQ; 119 120 /* reread the counter to help sync the two clock domains */ 121 secs = rtt_readl(rtc, VR); 122 secs2 = rtt_readl(rtc, VR); 123 if (secs != secs2) 124 secs = rtt_readl(rtc, VR); 125 126 rtc_time_to_tm(offset + secs, tm); 127 128 dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readtime", 129 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, 130 tm->tm_hour, tm->tm_min, tm->tm_sec); 131 132 return 0; 133 } 134 135 /* 136 * Set current time and date in RTC 137 */ 138 static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) 139 { 140 struct sam9_rtc *rtc = dev_get_drvdata(dev); 141 int err; 142 u32 offset, alarm, mr; 143 unsigned long secs; 144 145 dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "settime", 146 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, 147 tm->tm_hour, tm->tm_min, tm->tm_sec); 148 149 err = rtc_tm_to_time(tm, &secs); 150 if (err != 0) 151 return err; 152 153 mr = rtt_readl(rtc, MR); 154 155 /* disable interrupts */ 156 rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); 157 158 /* read current time offset */ 159 offset = gpbr_readl(rtc); 160 161 /* store the new base time in a battery backup register */ 162 secs += 1; 163 gpbr_writel(rtc, secs); 164 165 /* adjust the alarm time for the new base */ 166 alarm = rtt_readl(rtc, AR); 167 if (alarm != ALARM_DISABLED) { 168 if (offset > secs) { 169 /* time jumped backwards, increase time until alarm */ 170 alarm += (offset - secs); 171 } else if ((alarm + offset) > secs) { 172 /* time jumped forwards, decrease time until alarm */ 173 alarm -= (secs - offset); 174 } else { 175 /* time jumped past the alarm, disable alarm */ 176 alarm = ALARM_DISABLED; 177 mr &= ~AT91_RTT_ALMIEN; 178 } 179 rtt_writel(rtc, AR, alarm); 180 } 181 182 /* reset the timer, and re-enable interrupts */ 183 rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST); 184 185 return 0; 186 } 187 188 static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) 189 { 190 struct sam9_rtc *rtc = dev_get_drvdata(dev); 191 struct rtc_time *tm = &alrm->time; 192 u32 alarm = rtt_readl(rtc, AR); 193 u32 offset; 194 195 offset = gpbr_readl(rtc); 196 if (offset == 0) 197 return -EILSEQ; 198 199 memset(alrm, 0, sizeof(*alrm)); 200 if (alarm != ALARM_DISABLED && offset != 0) { 201 rtc_time_to_tm(offset + alarm, tm); 202 203 dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "readalarm", 204 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, 205 tm->tm_hour, tm->tm_min, tm->tm_sec); 206 207 if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN) 208 alrm->enabled = 1; 209 } 210 211 return 0; 212 } 213 214 static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) 215 { 216 struct sam9_rtc *rtc = dev_get_drvdata(dev); 217 struct rtc_time *tm = &alrm->time; 218 unsigned long secs; 219 u32 offset; 220 u32 mr; 221 int err; 222 223 err = rtc_tm_to_time(tm, &secs); 224 if (err != 0) 225 return err; 226 227 offset = gpbr_readl(rtc); 228 if (offset == 0) { 229 /* time is not set */ 230 return -EILSEQ; 231 } 232 mr = rtt_readl(rtc, MR); 233 rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN); 234 235 /* alarm in the past? finish and leave disabled */ 236 if (secs <= offset) { 237 rtt_writel(rtc, AR, ALARM_DISABLED); 238 return 0; 239 } 240 241 /* else set alarm and maybe enable it */ 242 rtt_writel(rtc, AR, secs - offset); 243 if (alrm->enabled) 244 rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN); 245 246 dev_dbg(dev, "%s: %4d-%02d-%02d %02d:%02d:%02d\n", "setalarm", 247 tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour, 248 tm->tm_min, tm->tm_sec); 249 250 return 0; 251 } 252 253 static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) 254 { 255 struct sam9_rtc *rtc = dev_get_drvdata(dev); 256 u32 mr = rtt_readl(rtc, MR); 257 258 dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr); 259 if (enabled) 260 rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN); 261 else 262 rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN); 263 return 0; 264 } 265 266 /* 267 * Provide additional RTC information in /proc/driver/rtc 268 */ 269 static int at91_rtc_proc(struct device *dev, struct seq_file *seq) 270 { 271 struct sam9_rtc *rtc = dev_get_drvdata(dev); 272 u32 mr = mr = rtt_readl(rtc, MR); 273 274 seq_printf(seq, "update_IRQ\t: %s\n", 275 (mr & AT91_RTT_RTTINCIEN) ? "yes" : "no"); 276 return 0; 277 } 278 279 static irqreturn_t at91_rtc_cache_events(struct sam9_rtc *rtc) 280 { 281 u32 sr, mr; 282 283 /* Shared interrupt may be for another device. Note: reading 284 * SR clears it, so we must only read it in this irq handler! 285 */ 286 mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); 287 sr = rtt_readl(rtc, SR) & (mr >> 16); 288 if (!sr) 289 return IRQ_NONE; 290 291 /* alarm status */ 292 if (sr & AT91_RTT_ALMS) 293 rtc->events |= (RTC_AF | RTC_IRQF); 294 295 /* timer update/increment */ 296 if (sr & AT91_RTT_RTTINC) 297 rtc->events |= (RTC_UF | RTC_IRQF); 298 299 return IRQ_HANDLED; 300 } 301 302 static void at91_rtc_flush_events(struct sam9_rtc *rtc) 303 { 304 if (!rtc->events) 305 return; 306 307 rtc_update_irq(rtc->rtcdev, 1, rtc->events); 308 rtc->events = 0; 309 310 pr_debug("%s: num=%ld, events=0x%02lx\n", __func__, 311 rtc->events >> 8, rtc->events & 0x000000FF); 312 } 313 314 /* 315 * IRQ handler for the RTC 316 */ 317 static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc) 318 { 319 struct sam9_rtc *rtc = _rtc; 320 int ret; 321 322 spin_lock(&rtc->lock); 323 324 ret = at91_rtc_cache_events(rtc); 325 326 /* We're called in suspended state */ 327 if (rtc->suspended) { 328 /* Mask irqs coming from this peripheral */ 329 rtt_writel(rtc, MR, 330 rtt_readl(rtc, MR) & 331 ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); 332 /* Trigger a system wakeup */ 333 pm_system_wakeup(); 334 } else { 335 at91_rtc_flush_events(rtc); 336 } 337 338 spin_unlock(&rtc->lock); 339 340 return ret; 341 } 342 343 static const struct rtc_class_ops at91_rtc_ops = { 344 .read_time = at91_rtc_readtime, 345 .set_time = at91_rtc_settime, 346 .read_alarm = at91_rtc_readalarm, 347 .set_alarm = at91_rtc_setalarm, 348 .proc = at91_rtc_proc, 349 .alarm_irq_enable = at91_rtc_alarm_irq_enable, 350 }; 351 352 static const struct regmap_config gpbr_regmap_config = { 353 .reg_bits = 32, 354 .val_bits = 32, 355 .reg_stride = 4, 356 }; 357 358 /* 359 * Initialize and install RTC driver 360 */ 361 static int at91_rtc_probe(struct platform_device *pdev) 362 { 363 struct resource *r; 364 struct sam9_rtc *rtc; 365 int ret, irq; 366 u32 mr; 367 unsigned int sclk_rate; 368 369 irq = platform_get_irq(pdev, 0); 370 if (irq < 0) { 371 dev_err(&pdev->dev, "failed to get interrupt resource\n"); 372 return irq; 373 } 374 375 rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL); 376 if (!rtc) 377 return -ENOMEM; 378 379 rtc->irq = irq; 380 381 /* platform setup code should have handled this; sigh */ 382 if (!device_can_wakeup(&pdev->dev)) 383 device_init_wakeup(&pdev->dev, 1); 384 385 platform_set_drvdata(pdev, rtc); 386 387 r = platform_get_resource(pdev, IORESOURCE_MEM, 0); 388 rtc->rtt = devm_ioremap_resource(&pdev->dev, r); 389 if (IS_ERR(rtc->rtt)) 390 return PTR_ERR(rtc->rtt); 391 392 if (!pdev->dev.of_node) { 393 /* 394 * TODO: Remove this code chunk when removing non DT board 395 * support. Remember to remove the gpbr_regmap_config 396 * variable too. 397 */ 398 void __iomem *gpbr; 399 400 r = platform_get_resource(pdev, IORESOURCE_MEM, 1); 401 gpbr = devm_ioremap_resource(&pdev->dev, r); 402 if (IS_ERR(gpbr)) 403 return PTR_ERR(gpbr); 404 405 rtc->gpbr = regmap_init_mmio(NULL, gpbr, 406 &gpbr_regmap_config); 407 } else { 408 struct of_phandle_args args; 409 410 ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, 411 "atmel,rtt-rtc-time-reg", 1, 0, 412 &args); 413 if (ret) 414 return ret; 415 416 rtc->gpbr = syscon_node_to_regmap(args.np); 417 rtc->gpbr_offset = args.args[0]; 418 } 419 420 if (IS_ERR(rtc->gpbr)) { 421 dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n"); 422 return -ENOMEM; 423 } 424 425 rtc->sclk = devm_clk_get(&pdev->dev, NULL); 426 if (IS_ERR(rtc->sclk)) 427 return PTR_ERR(rtc->sclk); 428 429 ret = clk_prepare_enable(rtc->sclk); 430 if (ret) { 431 dev_err(&pdev->dev, "Could not enable slow clock\n"); 432 return ret; 433 } 434 435 sclk_rate = clk_get_rate(rtc->sclk); 436 if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) { 437 dev_err(&pdev->dev, "Invalid slow clock rate\n"); 438 ret = -EINVAL; 439 goto err_clk; 440 } 441 442 mr = rtt_readl(rtc, MR); 443 444 /* unless RTT is counting at 1 Hz, re-initialize it */ 445 if ((mr & AT91_RTT_RTPRES) != sclk_rate) { 446 mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES); 447 gpbr_writel(rtc, 0); 448 } 449 450 /* disable all interrupts (same as on shutdown path) */ 451 mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); 452 rtt_writel(rtc, MR, mr); 453 454 rtc->rtcdev = devm_rtc_device_register(&pdev->dev, pdev->name, 455 &at91_rtc_ops, THIS_MODULE); 456 if (IS_ERR(rtc->rtcdev)) { 457 ret = PTR_ERR(rtc->rtcdev); 458 goto err_clk; 459 } 460 461 /* register irq handler after we know what name we'll use */ 462 ret = devm_request_irq(&pdev->dev, rtc->irq, at91_rtc_interrupt, 463 IRQF_SHARED | IRQF_COND_SUSPEND, 464 dev_name(&rtc->rtcdev->dev), rtc); 465 if (ret) { 466 dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq); 467 goto err_clk; 468 } 469 470 /* NOTE: sam9260 rev A silicon has a ROM bug which resets the 471 * RTT on at least some reboots. If you have that chip, you must 472 * initialize the time from some external source like a GPS, wall 473 * clock, discrete RTC, etc 474 */ 475 476 if (gpbr_readl(rtc) == 0) 477 dev_warn(&pdev->dev, "%s: SET TIME!\n", 478 dev_name(&rtc->rtcdev->dev)); 479 480 return 0; 481 482 err_clk: 483 clk_disable_unprepare(rtc->sclk); 484 485 return ret; 486 } 487 488 /* 489 * Disable and remove the RTC driver 490 */ 491 static int at91_rtc_remove(struct platform_device *pdev) 492 { 493 struct sam9_rtc *rtc = platform_get_drvdata(pdev); 494 u32 mr = rtt_readl(rtc, MR); 495 496 /* disable all interrupts */ 497 rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); 498 499 clk_disable_unprepare(rtc->sclk); 500 501 return 0; 502 } 503 504 static void at91_rtc_shutdown(struct platform_device *pdev) 505 { 506 struct sam9_rtc *rtc = platform_get_drvdata(pdev); 507 u32 mr = rtt_readl(rtc, MR); 508 509 rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); 510 rtt_writel(rtc, MR, mr & ~rtc->imr); 511 } 512 513 #ifdef CONFIG_PM_SLEEP 514 515 /* AT91SAM9 RTC Power management control */ 516 517 static int at91_rtc_suspend(struct device *dev) 518 { 519 struct sam9_rtc *rtc = dev_get_drvdata(dev); 520 u32 mr = rtt_readl(rtc, MR); 521 522 /* 523 * This IRQ is shared with DBGU and other hardware which isn't 524 * necessarily a wakeup event source. 525 */ 526 rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); 527 if (rtc->imr) { 528 if (device_may_wakeup(dev) && (mr & AT91_RTT_ALMIEN)) { 529 unsigned long flags; 530 531 enable_irq_wake(rtc->irq); 532 spin_lock_irqsave(&rtc->lock, flags); 533 rtc->suspended = true; 534 spin_unlock_irqrestore(&rtc->lock, flags); 535 /* don't let RTTINC cause wakeups */ 536 if (mr & AT91_RTT_RTTINCIEN) 537 rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); 538 } else 539 rtt_writel(rtc, MR, mr & ~rtc->imr); 540 } 541 542 return 0; 543 } 544 545 static int at91_rtc_resume(struct device *dev) 546 { 547 struct sam9_rtc *rtc = dev_get_drvdata(dev); 548 u32 mr; 549 550 if (rtc->imr) { 551 unsigned long flags; 552 553 if (device_may_wakeup(dev)) 554 disable_irq_wake(rtc->irq); 555 mr = rtt_readl(rtc, MR); 556 rtt_writel(rtc, MR, mr | rtc->imr); 557 558 spin_lock_irqsave(&rtc->lock, flags); 559 rtc->suspended = false; 560 at91_rtc_cache_events(rtc); 561 at91_rtc_flush_events(rtc); 562 spin_unlock_irqrestore(&rtc->lock, flags); 563 } 564 565 return 0; 566 } 567 #endif 568 569 static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); 570 571 #ifdef CONFIG_OF 572 static const struct of_device_id at91_rtc_dt_ids[] = { 573 { .compatible = "atmel,at91sam9260-rtt" }, 574 { /* sentinel */ } 575 }; 576 MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids); 577 #endif 578 579 static struct platform_driver at91_rtc_driver = { 580 .probe = at91_rtc_probe, 581 .remove = at91_rtc_remove, 582 .shutdown = at91_rtc_shutdown, 583 .driver = { 584 .name = "rtc-at91sam9", 585 .pm = &at91_rtc_pm_ops, 586 .of_match_table = of_match_ptr(at91_rtc_dt_ids), 587 }, 588 }; 589 590 module_platform_driver(at91_rtc_driver); 591 592 MODULE_AUTHOR("Michel Benoit"); 593 MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x"); 594 MODULE_LICENSE("GPL"); 595