xref: /linux-6.15/drivers/net/dsa/b53/b53_common.c (revision ffb68fc5)
1 /*
2  * B53 switch driver main logic
3  *
4  * Copyright (C) 2011-2013 Jonas Gorski <[email protected]>
5  * Copyright (C) 2016 Florian Fainelli <[email protected]>
6  *
7  * Permission to use, copy, modify, and/or distribute this software for any
8  * purpose with or without fee is hereby granted, provided that the above
9  * copyright notice and this permission notice appear in all copies.
10  *
11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
18  */
19 
20 #include <linux/delay.h>
21 #include <linux/export.h>
22 #include <linux/gpio.h>
23 #include <linux/kernel.h>
24 #include <linux/module.h>
25 #include <linux/platform_data/b53.h>
26 #include <linux/phy.h>
27 #include <linux/phylink.h>
28 #include <linux/etherdevice.h>
29 #include <linux/if_bridge.h>
30 #include <net/dsa.h>
31 
32 #include "b53_regs.h"
33 #include "b53_priv.h"
34 
35 struct b53_mib_desc {
36 	u8 size;
37 	u8 offset;
38 	const char *name;
39 };
40 
41 /* BCM5365 MIB counters */
42 static const struct b53_mib_desc b53_mibs_65[] = {
43 	{ 8, 0x00, "TxOctets" },
44 	{ 4, 0x08, "TxDropPkts" },
45 	{ 4, 0x10, "TxBroadcastPkts" },
46 	{ 4, 0x14, "TxMulticastPkts" },
47 	{ 4, 0x18, "TxUnicastPkts" },
48 	{ 4, 0x1c, "TxCollisions" },
49 	{ 4, 0x20, "TxSingleCollision" },
50 	{ 4, 0x24, "TxMultipleCollision" },
51 	{ 4, 0x28, "TxDeferredTransmit" },
52 	{ 4, 0x2c, "TxLateCollision" },
53 	{ 4, 0x30, "TxExcessiveCollision" },
54 	{ 4, 0x38, "TxPausePkts" },
55 	{ 8, 0x44, "RxOctets" },
56 	{ 4, 0x4c, "RxUndersizePkts" },
57 	{ 4, 0x50, "RxPausePkts" },
58 	{ 4, 0x54, "Pkts64Octets" },
59 	{ 4, 0x58, "Pkts65to127Octets" },
60 	{ 4, 0x5c, "Pkts128to255Octets" },
61 	{ 4, 0x60, "Pkts256to511Octets" },
62 	{ 4, 0x64, "Pkts512to1023Octets" },
63 	{ 4, 0x68, "Pkts1024to1522Octets" },
64 	{ 4, 0x6c, "RxOversizePkts" },
65 	{ 4, 0x70, "RxJabbers" },
66 	{ 4, 0x74, "RxAlignmentErrors" },
67 	{ 4, 0x78, "RxFCSErrors" },
68 	{ 8, 0x7c, "RxGoodOctets" },
69 	{ 4, 0x84, "RxDropPkts" },
70 	{ 4, 0x88, "RxUnicastPkts" },
71 	{ 4, 0x8c, "RxMulticastPkts" },
72 	{ 4, 0x90, "RxBroadcastPkts" },
73 	{ 4, 0x94, "RxSAChanges" },
74 	{ 4, 0x98, "RxFragments" },
75 };
76 
77 #define B53_MIBS_65_SIZE	ARRAY_SIZE(b53_mibs_65)
78 
79 /* BCM63xx MIB counters */
80 static const struct b53_mib_desc b53_mibs_63xx[] = {
81 	{ 8, 0x00, "TxOctets" },
82 	{ 4, 0x08, "TxDropPkts" },
83 	{ 4, 0x0c, "TxQoSPkts" },
84 	{ 4, 0x10, "TxBroadcastPkts" },
85 	{ 4, 0x14, "TxMulticastPkts" },
86 	{ 4, 0x18, "TxUnicastPkts" },
87 	{ 4, 0x1c, "TxCollisions" },
88 	{ 4, 0x20, "TxSingleCollision" },
89 	{ 4, 0x24, "TxMultipleCollision" },
90 	{ 4, 0x28, "TxDeferredTransmit" },
91 	{ 4, 0x2c, "TxLateCollision" },
92 	{ 4, 0x30, "TxExcessiveCollision" },
93 	{ 4, 0x38, "TxPausePkts" },
94 	{ 8, 0x3c, "TxQoSOctets" },
95 	{ 8, 0x44, "RxOctets" },
96 	{ 4, 0x4c, "RxUndersizePkts" },
97 	{ 4, 0x50, "RxPausePkts" },
98 	{ 4, 0x54, "Pkts64Octets" },
99 	{ 4, 0x58, "Pkts65to127Octets" },
100 	{ 4, 0x5c, "Pkts128to255Octets" },
101 	{ 4, 0x60, "Pkts256to511Octets" },
102 	{ 4, 0x64, "Pkts512to1023Octets" },
103 	{ 4, 0x68, "Pkts1024to1522Octets" },
104 	{ 4, 0x6c, "RxOversizePkts" },
105 	{ 4, 0x70, "RxJabbers" },
106 	{ 4, 0x74, "RxAlignmentErrors" },
107 	{ 4, 0x78, "RxFCSErrors" },
108 	{ 8, 0x7c, "RxGoodOctets" },
109 	{ 4, 0x84, "RxDropPkts" },
110 	{ 4, 0x88, "RxUnicastPkts" },
111 	{ 4, 0x8c, "RxMulticastPkts" },
112 	{ 4, 0x90, "RxBroadcastPkts" },
113 	{ 4, 0x94, "RxSAChanges" },
114 	{ 4, 0x98, "RxFragments" },
115 	{ 4, 0xa0, "RxSymbolErrors" },
116 	{ 4, 0xa4, "RxQoSPkts" },
117 	{ 8, 0xa8, "RxQoSOctets" },
118 	{ 4, 0xb0, "Pkts1523to2047Octets" },
119 	{ 4, 0xb4, "Pkts2048to4095Octets" },
120 	{ 4, 0xb8, "Pkts4096to8191Octets" },
121 	{ 4, 0xbc, "Pkts8192to9728Octets" },
122 	{ 4, 0xc0, "RxDiscarded" },
123 };
124 
125 #define B53_MIBS_63XX_SIZE	ARRAY_SIZE(b53_mibs_63xx)
126 
127 /* MIB counters */
128 static const struct b53_mib_desc b53_mibs[] = {
129 	{ 8, 0x00, "TxOctets" },
130 	{ 4, 0x08, "TxDropPkts" },
131 	{ 4, 0x10, "TxBroadcastPkts" },
132 	{ 4, 0x14, "TxMulticastPkts" },
133 	{ 4, 0x18, "TxUnicastPkts" },
134 	{ 4, 0x1c, "TxCollisions" },
135 	{ 4, 0x20, "TxSingleCollision" },
136 	{ 4, 0x24, "TxMultipleCollision" },
137 	{ 4, 0x28, "TxDeferredTransmit" },
138 	{ 4, 0x2c, "TxLateCollision" },
139 	{ 4, 0x30, "TxExcessiveCollision" },
140 	{ 4, 0x38, "TxPausePkts" },
141 	{ 8, 0x50, "RxOctets" },
142 	{ 4, 0x58, "RxUndersizePkts" },
143 	{ 4, 0x5c, "RxPausePkts" },
144 	{ 4, 0x60, "Pkts64Octets" },
145 	{ 4, 0x64, "Pkts65to127Octets" },
146 	{ 4, 0x68, "Pkts128to255Octets" },
147 	{ 4, 0x6c, "Pkts256to511Octets" },
148 	{ 4, 0x70, "Pkts512to1023Octets" },
149 	{ 4, 0x74, "Pkts1024to1522Octets" },
150 	{ 4, 0x78, "RxOversizePkts" },
151 	{ 4, 0x7c, "RxJabbers" },
152 	{ 4, 0x80, "RxAlignmentErrors" },
153 	{ 4, 0x84, "RxFCSErrors" },
154 	{ 8, 0x88, "RxGoodOctets" },
155 	{ 4, 0x90, "RxDropPkts" },
156 	{ 4, 0x94, "RxUnicastPkts" },
157 	{ 4, 0x98, "RxMulticastPkts" },
158 	{ 4, 0x9c, "RxBroadcastPkts" },
159 	{ 4, 0xa0, "RxSAChanges" },
160 	{ 4, 0xa4, "RxFragments" },
161 	{ 4, 0xa8, "RxJumboPkts" },
162 	{ 4, 0xac, "RxSymbolErrors" },
163 	{ 4, 0xc0, "RxDiscarded" },
164 };
165 
166 #define B53_MIBS_SIZE	ARRAY_SIZE(b53_mibs)
167 
168 static const struct b53_mib_desc b53_mibs_58xx[] = {
169 	{ 8, 0x00, "TxOctets" },
170 	{ 4, 0x08, "TxDropPkts" },
171 	{ 4, 0x0c, "TxQPKTQ0" },
172 	{ 4, 0x10, "TxBroadcastPkts" },
173 	{ 4, 0x14, "TxMulticastPkts" },
174 	{ 4, 0x18, "TxUnicastPKts" },
175 	{ 4, 0x1c, "TxCollisions" },
176 	{ 4, 0x20, "TxSingleCollision" },
177 	{ 4, 0x24, "TxMultipleCollision" },
178 	{ 4, 0x28, "TxDeferredCollision" },
179 	{ 4, 0x2c, "TxLateCollision" },
180 	{ 4, 0x30, "TxExcessiveCollision" },
181 	{ 4, 0x34, "TxFrameInDisc" },
182 	{ 4, 0x38, "TxPausePkts" },
183 	{ 4, 0x3c, "TxQPKTQ1" },
184 	{ 4, 0x40, "TxQPKTQ2" },
185 	{ 4, 0x44, "TxQPKTQ3" },
186 	{ 4, 0x48, "TxQPKTQ4" },
187 	{ 4, 0x4c, "TxQPKTQ5" },
188 	{ 8, 0x50, "RxOctets" },
189 	{ 4, 0x58, "RxUndersizePkts" },
190 	{ 4, 0x5c, "RxPausePkts" },
191 	{ 4, 0x60, "RxPkts64Octets" },
192 	{ 4, 0x64, "RxPkts65to127Octets" },
193 	{ 4, 0x68, "RxPkts128to255Octets" },
194 	{ 4, 0x6c, "RxPkts256to511Octets" },
195 	{ 4, 0x70, "RxPkts512to1023Octets" },
196 	{ 4, 0x74, "RxPkts1024toMaxPktsOctets" },
197 	{ 4, 0x78, "RxOversizePkts" },
198 	{ 4, 0x7c, "RxJabbers" },
199 	{ 4, 0x80, "RxAlignmentErrors" },
200 	{ 4, 0x84, "RxFCSErrors" },
201 	{ 8, 0x88, "RxGoodOctets" },
202 	{ 4, 0x90, "RxDropPkts" },
203 	{ 4, 0x94, "RxUnicastPkts" },
204 	{ 4, 0x98, "RxMulticastPkts" },
205 	{ 4, 0x9c, "RxBroadcastPkts" },
206 	{ 4, 0xa0, "RxSAChanges" },
207 	{ 4, 0xa4, "RxFragments" },
208 	{ 4, 0xa8, "RxJumboPkt" },
209 	{ 4, 0xac, "RxSymblErr" },
210 	{ 4, 0xb0, "InRangeErrCount" },
211 	{ 4, 0xb4, "OutRangeErrCount" },
212 	{ 4, 0xb8, "EEELpiEvent" },
213 	{ 4, 0xbc, "EEELpiDuration" },
214 	{ 4, 0xc0, "RxDiscard" },
215 	{ 4, 0xc8, "TxQPKTQ6" },
216 	{ 4, 0xcc, "TxQPKTQ7" },
217 	{ 4, 0xd0, "TxPkts64Octets" },
218 	{ 4, 0xd4, "TxPkts65to127Octets" },
219 	{ 4, 0xd8, "TxPkts128to255Octets" },
220 	{ 4, 0xdc, "TxPkts256to511Ocets" },
221 	{ 4, 0xe0, "TxPkts512to1023Ocets" },
222 	{ 4, 0xe4, "TxPkts1024toMaxPktOcets" },
223 };
224 
225 #define B53_MIBS_58XX_SIZE	ARRAY_SIZE(b53_mibs_58xx)
226 
227 static int b53_do_vlan_op(struct b53_device *dev, u8 op)
228 {
229 	unsigned int i;
230 
231 	b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
232 
233 	for (i = 0; i < 10; i++) {
234 		u8 vta;
235 
236 		b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
237 		if (!(vta & VTA_START_CMD))
238 			return 0;
239 
240 		usleep_range(100, 200);
241 	}
242 
243 	return -EIO;
244 }
245 
246 static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
247 			       struct b53_vlan *vlan)
248 {
249 	if (is5325(dev)) {
250 		u32 entry = 0;
251 
252 		if (vlan->members) {
253 			entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
254 				 VA_UNTAG_S_25) | vlan->members;
255 			if (dev->core_rev >= 3)
256 				entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
257 			else
258 				entry |= VA_VALID_25;
259 		}
260 
261 		b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
262 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
263 			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
264 	} else if (is5365(dev)) {
265 		u16 entry = 0;
266 
267 		if (vlan->members)
268 			entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
269 				 VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
270 
271 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
272 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
273 			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
274 	} else {
275 		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
276 		b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
277 			    (vlan->untag << VTE_UNTAG_S) | vlan->members);
278 
279 		b53_do_vlan_op(dev, VTA_CMD_WRITE);
280 	}
281 
282 	dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
283 		vid, vlan->members, vlan->untag);
284 }
285 
286 static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
287 			       struct b53_vlan *vlan)
288 {
289 	if (is5325(dev)) {
290 		u32 entry = 0;
291 
292 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
293 			    VTA_RW_STATE_RD | VTA_RW_OP_EN);
294 		b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
295 
296 		if (dev->core_rev >= 3)
297 			vlan->valid = !!(entry & VA_VALID_25_R4);
298 		else
299 			vlan->valid = !!(entry & VA_VALID_25);
300 		vlan->members = entry & VA_MEMBER_MASK;
301 		vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
302 
303 	} else if (is5365(dev)) {
304 		u16 entry = 0;
305 
306 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
307 			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
308 		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
309 
310 		vlan->valid = !!(entry & VA_VALID_65);
311 		vlan->members = entry & VA_MEMBER_MASK;
312 		vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
313 	} else {
314 		u32 entry = 0;
315 
316 		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
317 		b53_do_vlan_op(dev, VTA_CMD_READ);
318 		b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
319 		vlan->members = entry & VTE_MEMBERS;
320 		vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
321 		vlan->valid = true;
322 	}
323 }
324 
325 static void b53_set_forwarding(struct b53_device *dev, int enable)
326 {
327 	u8 mgmt;
328 
329 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
330 
331 	if (enable)
332 		mgmt |= SM_SW_FWD_EN;
333 	else
334 		mgmt &= ~SM_SW_FWD_EN;
335 
336 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
337 
338 	/* Include IMP port in dumb forwarding mode
339 	 */
340 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
341 	mgmt |= B53_MII_DUMB_FWDG_EN;
342 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
343 
344 	/* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
345 	 * frames should be flooded or not.
346 	 */
347 	b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
348 	mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
349 	b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
350 }
351 
352 static void b53_enable_vlan(struct b53_device *dev, bool enable,
353 			    bool enable_filtering)
354 {
355 	u8 mgmt, vc0, vc1, vc4 = 0, vc5;
356 
357 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
358 	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
359 	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
360 
361 	if (is5325(dev) || is5365(dev)) {
362 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
363 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
364 	} else if (is63xx(dev)) {
365 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
366 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
367 	} else {
368 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
369 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
370 	}
371 
372 	if (enable) {
373 		vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
374 		vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
375 		vc4 &= ~VC4_ING_VID_CHECK_MASK;
376 		if (enable_filtering) {
377 			vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
378 			vc5 |= VC5_DROP_VTABLE_MISS;
379 		} else {
380 			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
381 			vc5 &= ~VC5_DROP_VTABLE_MISS;
382 		}
383 
384 		if (is5325(dev))
385 			vc0 &= ~VC0_RESERVED_1;
386 
387 		if (is5325(dev) || is5365(dev))
388 			vc1 |= VC1_RX_MCST_TAG_EN;
389 
390 	} else {
391 		vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
392 		vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
393 		vc4 &= ~VC4_ING_VID_CHECK_MASK;
394 		vc5 &= ~VC5_DROP_VTABLE_MISS;
395 
396 		if (is5325(dev) || is5365(dev))
397 			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
398 		else
399 			vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
400 
401 		if (is5325(dev) || is5365(dev))
402 			vc1 &= ~VC1_RX_MCST_TAG_EN;
403 	}
404 
405 	if (!is5325(dev) && !is5365(dev))
406 		vc5 &= ~VC5_VID_FFF_EN;
407 
408 	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
409 	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
410 
411 	if (is5325(dev) || is5365(dev)) {
412 		/* enable the high 8 bit vid check on 5325 */
413 		if (is5325(dev) && enable)
414 			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
415 				   VC3_HIGH_8BIT_EN);
416 		else
417 			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
418 
419 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
420 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
421 	} else if (is63xx(dev)) {
422 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
423 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
424 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
425 	} else {
426 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
427 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
428 		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
429 	}
430 
431 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
432 
433 	dev->vlan_enabled = enable;
434 }
435 
436 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
437 {
438 	u32 port_mask = 0;
439 	u16 max_size = JMS_MIN_SIZE;
440 
441 	if (is5325(dev) || is5365(dev))
442 		return -EINVAL;
443 
444 	if (enable) {
445 		port_mask = dev->enabled_ports;
446 		max_size = JMS_MAX_SIZE;
447 		if (allow_10_100)
448 			port_mask |= JPM_10_100_JUMBO_EN;
449 	}
450 
451 	b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
452 	return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
453 }
454 
455 static int b53_flush_arl(struct b53_device *dev, u8 mask)
456 {
457 	unsigned int i;
458 
459 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
460 		   FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
461 
462 	for (i = 0; i < 10; i++) {
463 		u8 fast_age_ctrl;
464 
465 		b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
466 			  &fast_age_ctrl);
467 
468 		if (!(fast_age_ctrl & FAST_AGE_DONE))
469 			goto out;
470 
471 		msleep(1);
472 	}
473 
474 	return -ETIMEDOUT;
475 out:
476 	/* Only age dynamic entries (default behavior) */
477 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
478 	return 0;
479 }
480 
481 static int b53_fast_age_port(struct b53_device *dev, int port)
482 {
483 	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
484 
485 	return b53_flush_arl(dev, FAST_AGE_PORT);
486 }
487 
488 static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
489 {
490 	b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
491 
492 	return b53_flush_arl(dev, FAST_AGE_VLAN);
493 }
494 
495 void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
496 {
497 	struct b53_device *dev = ds->priv;
498 	unsigned int i;
499 	u16 pvlan;
500 
501 	/* Enable the IMP port to be in the same VLAN as the other ports
502 	 * on a per-port basis such that we only have Port i and IMP in
503 	 * the same VLAN.
504 	 */
505 	b53_for_each_port(dev, i) {
506 		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
507 		pvlan |= BIT(cpu_port);
508 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
509 	}
510 }
511 EXPORT_SYMBOL(b53_imp_vlan_setup);
512 
513 int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
514 {
515 	struct b53_device *dev = ds->priv;
516 	unsigned int cpu_port;
517 	int ret = 0;
518 	u16 pvlan;
519 
520 	if (!dsa_is_user_port(ds, port))
521 		return 0;
522 
523 	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
524 
525 	b53_br_egress_floods(ds, port, true, true);
526 
527 	if (dev->ops->irq_enable)
528 		ret = dev->ops->irq_enable(dev, port);
529 	if (ret)
530 		return ret;
531 
532 	/* Clear the Rx and Tx disable bits and set to no spanning tree */
533 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
534 
535 	/* Set this port, and only this one to be in the default VLAN,
536 	 * if member of a bridge, restore its membership prior to
537 	 * bringing down this port.
538 	 */
539 	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
540 	pvlan &= ~0x1ff;
541 	pvlan |= BIT(port);
542 	pvlan |= dev->ports[port].vlan_ctl_mask;
543 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
544 
545 	b53_imp_vlan_setup(ds, cpu_port);
546 
547 	/* If EEE was enabled, restore it */
548 	if (dev->ports[port].eee.eee_enabled)
549 		b53_eee_enable_set(ds, port, true);
550 
551 	return 0;
552 }
553 EXPORT_SYMBOL(b53_enable_port);
554 
555 void b53_disable_port(struct dsa_switch *ds, int port)
556 {
557 	struct b53_device *dev = ds->priv;
558 	u8 reg;
559 
560 	/* Disable Tx/Rx for the port */
561 	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
562 	reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
563 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
564 
565 	if (dev->ops->irq_disable)
566 		dev->ops->irq_disable(dev, port);
567 }
568 EXPORT_SYMBOL(b53_disable_port);
569 
570 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
571 {
572 	struct b53_device *dev = ds->priv;
573 	bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
574 	u8 hdr_ctl, val;
575 	u16 reg;
576 
577 	/* Resolve which bit controls the Broadcom tag */
578 	switch (port) {
579 	case 8:
580 		val = BRCM_HDR_P8_EN;
581 		break;
582 	case 7:
583 		val = BRCM_HDR_P7_EN;
584 		break;
585 	case 5:
586 		val = BRCM_HDR_P5_EN;
587 		break;
588 	default:
589 		val = 0;
590 		break;
591 	}
592 
593 	/* Enable management mode if tagging is requested */
594 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl);
595 	if (tag_en)
596 		hdr_ctl |= SM_SW_FWD_MODE;
597 	else
598 		hdr_ctl &= ~SM_SW_FWD_MODE;
599 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl);
600 
601 	/* Configure the appropriate IMP port */
602 	b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl);
603 	if (port == 8)
604 		hdr_ctl |= GC_FRM_MGMT_PORT_MII;
605 	else if (port == 5)
606 		hdr_ctl |= GC_FRM_MGMT_PORT_M;
607 	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
608 
609 	/* Enable Broadcom tags for IMP port */
610 	b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
611 	if (tag_en)
612 		hdr_ctl |= val;
613 	else
614 		hdr_ctl &= ~val;
615 	b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
616 
617 	/* Registers below are only accessible on newer devices */
618 	if (!is58xx(dev))
619 		return;
620 
621 	/* Enable reception Broadcom tag for CPU TX (switch RX) to
622 	 * allow us to tag outgoing frames
623 	 */
624 	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
625 	if (tag_en)
626 		reg &= ~BIT(port);
627 	else
628 		reg |= BIT(port);
629 	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
630 
631 	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
632 	 * allow delivering frames to the per-port net_devices
633 	 */
634 	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
635 	if (tag_en)
636 		reg &= ~BIT(port);
637 	else
638 		reg |= BIT(port);
639 	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
640 }
641 EXPORT_SYMBOL(b53_brcm_hdr_setup);
642 
643 static void b53_enable_cpu_port(struct b53_device *dev, int port)
644 {
645 	u8 port_ctrl;
646 
647 	/* BCM5325 CPU port is at 8 */
648 	if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
649 		port = B53_CPU_PORT;
650 
651 	port_ctrl = PORT_CTRL_RX_BCST_EN |
652 		    PORT_CTRL_RX_MCST_EN |
653 		    PORT_CTRL_RX_UCST_EN;
654 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
655 
656 	b53_brcm_hdr_setup(dev->ds, port);
657 
658 	b53_br_egress_floods(dev->ds, port, true, true);
659 }
660 
661 static void b53_enable_mib(struct b53_device *dev)
662 {
663 	u8 gc;
664 
665 	b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
666 	gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
667 	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
668 }
669 
670 static u16 b53_default_pvid(struct b53_device *dev)
671 {
672 	if (is5325(dev) || is5365(dev))
673 		return 1;
674 	else
675 		return 0;
676 }
677 
678 int b53_configure_vlan(struct dsa_switch *ds)
679 {
680 	struct b53_device *dev = ds->priv;
681 	struct b53_vlan vl = { 0 };
682 	struct b53_vlan *v;
683 	int i, def_vid;
684 	u16 vid;
685 
686 	def_vid = b53_default_pvid(dev);
687 
688 	/* clear all vlan entries */
689 	if (is5325(dev) || is5365(dev)) {
690 		for (i = def_vid; i < dev->num_vlans; i++)
691 			b53_set_vlan_entry(dev, i, &vl);
692 	} else {
693 		b53_do_vlan_op(dev, VTA_CMD_CLEAR);
694 	}
695 
696 	b53_enable_vlan(dev, dev->vlan_enabled, ds->vlan_filtering);
697 
698 	b53_for_each_port(dev, i)
699 		b53_write16(dev, B53_VLAN_PAGE,
700 			    B53_VLAN_PORT_DEF_TAG(i), def_vid);
701 
702 	/* Upon initial call we have not set-up any VLANs, but upon
703 	 * system resume, we need to restore all VLAN entries.
704 	 */
705 	for (vid = def_vid; vid < dev->num_vlans; vid++) {
706 		v = &dev->vlans[vid];
707 
708 		if (!v->members)
709 			continue;
710 
711 		b53_set_vlan_entry(dev, vid, v);
712 		b53_fast_age_vlan(dev, vid);
713 	}
714 
715 	return 0;
716 }
717 EXPORT_SYMBOL(b53_configure_vlan);
718 
719 static void b53_switch_reset_gpio(struct b53_device *dev)
720 {
721 	int gpio = dev->reset_gpio;
722 
723 	if (gpio < 0)
724 		return;
725 
726 	/* Reset sequence: RESET low(50ms)->high(20ms)
727 	 */
728 	gpio_set_value(gpio, 0);
729 	mdelay(50);
730 
731 	gpio_set_value(gpio, 1);
732 	mdelay(20);
733 
734 	dev->current_page = 0xff;
735 }
736 
737 static int b53_switch_reset(struct b53_device *dev)
738 {
739 	unsigned int timeout = 1000;
740 	u8 mgmt, reg;
741 
742 	b53_switch_reset_gpio(dev);
743 
744 	if (is539x(dev)) {
745 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
746 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
747 	}
748 
749 	/* This is specific to 58xx devices here, do not use is58xx() which
750 	 * covers the larger Starfigther 2 family, including 7445/7278 which
751 	 * still use this driver as a library and need to perform the reset
752 	 * earlier.
753 	 */
754 	if (dev->chip_id == BCM58XX_DEVICE_ID ||
755 	    dev->chip_id == BCM583XX_DEVICE_ID) {
756 		b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
757 		reg |= SW_RST | EN_SW_RST | EN_CH_RST;
758 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
759 
760 		do {
761 			b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
762 			if (!(reg & SW_RST))
763 				break;
764 
765 			usleep_range(1000, 2000);
766 		} while (timeout-- > 0);
767 
768 		if (timeout == 0) {
769 			dev_err(dev->dev,
770 				"Timeout waiting for SW_RST to clear!\n");
771 			return -ETIMEDOUT;
772 		}
773 	}
774 
775 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
776 
777 	if (!(mgmt & SM_SW_FWD_EN)) {
778 		mgmt &= ~SM_SW_FWD_MODE;
779 		mgmt |= SM_SW_FWD_EN;
780 
781 		b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
782 		b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
783 
784 		if (!(mgmt & SM_SW_FWD_EN)) {
785 			dev_err(dev->dev, "Failed to enable switch!\n");
786 			return -EINVAL;
787 		}
788 	}
789 
790 	b53_enable_mib(dev);
791 
792 	return b53_flush_arl(dev, FAST_AGE_STATIC);
793 }
794 
795 static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
796 {
797 	struct b53_device *priv = ds->priv;
798 	u16 value = 0;
799 	int ret;
800 
801 	if (priv->ops->phy_read16)
802 		ret = priv->ops->phy_read16(priv, addr, reg, &value);
803 	else
804 		ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
805 				 reg * 2, &value);
806 
807 	return ret ? ret : value;
808 }
809 
810 static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
811 {
812 	struct b53_device *priv = ds->priv;
813 
814 	if (priv->ops->phy_write16)
815 		return priv->ops->phy_write16(priv, addr, reg, val);
816 
817 	return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
818 }
819 
820 static int b53_reset_switch(struct b53_device *priv)
821 {
822 	/* reset vlans */
823 	memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
824 	memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
825 
826 	priv->serdes_lane = B53_INVALID_LANE;
827 
828 	return b53_switch_reset(priv);
829 }
830 
831 static int b53_apply_config(struct b53_device *priv)
832 {
833 	/* disable switching */
834 	b53_set_forwarding(priv, 0);
835 
836 	b53_configure_vlan(priv->ds);
837 
838 	/* enable switching */
839 	b53_set_forwarding(priv, 1);
840 
841 	return 0;
842 }
843 
844 static void b53_reset_mib(struct b53_device *priv)
845 {
846 	u8 gc;
847 
848 	b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
849 
850 	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
851 	msleep(1);
852 	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
853 	msleep(1);
854 }
855 
856 static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
857 {
858 	if (is5365(dev))
859 		return b53_mibs_65;
860 	else if (is63xx(dev))
861 		return b53_mibs_63xx;
862 	else if (is58xx(dev))
863 		return b53_mibs_58xx;
864 	else
865 		return b53_mibs;
866 }
867 
868 static unsigned int b53_get_mib_size(struct b53_device *dev)
869 {
870 	if (is5365(dev))
871 		return B53_MIBS_65_SIZE;
872 	else if (is63xx(dev))
873 		return B53_MIBS_63XX_SIZE;
874 	else if (is58xx(dev))
875 		return B53_MIBS_58XX_SIZE;
876 	else
877 		return B53_MIBS_SIZE;
878 }
879 
880 static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
881 {
882 	/* These ports typically do not have built-in PHYs */
883 	switch (port) {
884 	case B53_CPU_PORT_25:
885 	case 7:
886 	case B53_CPU_PORT:
887 		return NULL;
888 	}
889 
890 	return mdiobus_get_phy(ds->slave_mii_bus, port);
891 }
892 
893 void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
894 		     uint8_t *data)
895 {
896 	struct b53_device *dev = ds->priv;
897 	const struct b53_mib_desc *mibs = b53_get_mib(dev);
898 	unsigned int mib_size = b53_get_mib_size(dev);
899 	struct phy_device *phydev;
900 	unsigned int i;
901 
902 	if (stringset == ETH_SS_STATS) {
903 		for (i = 0; i < mib_size; i++)
904 			strlcpy(data + i * ETH_GSTRING_LEN,
905 				mibs[i].name, ETH_GSTRING_LEN);
906 	} else if (stringset == ETH_SS_PHY_STATS) {
907 		phydev = b53_get_phy_device(ds, port);
908 		if (!phydev)
909 			return;
910 
911 		phy_ethtool_get_strings(phydev, data);
912 	}
913 }
914 EXPORT_SYMBOL(b53_get_strings);
915 
916 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
917 {
918 	struct b53_device *dev = ds->priv;
919 	const struct b53_mib_desc *mibs = b53_get_mib(dev);
920 	unsigned int mib_size = b53_get_mib_size(dev);
921 	const struct b53_mib_desc *s;
922 	unsigned int i;
923 	u64 val = 0;
924 
925 	if (is5365(dev) && port == 5)
926 		port = 8;
927 
928 	mutex_lock(&dev->stats_mutex);
929 
930 	for (i = 0; i < mib_size; i++) {
931 		s = &mibs[i];
932 
933 		if (s->size == 8) {
934 			b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
935 		} else {
936 			u32 val32;
937 
938 			b53_read32(dev, B53_MIB_PAGE(port), s->offset,
939 				   &val32);
940 			val = val32;
941 		}
942 		data[i] = (u64)val;
943 	}
944 
945 	mutex_unlock(&dev->stats_mutex);
946 }
947 EXPORT_SYMBOL(b53_get_ethtool_stats);
948 
949 void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
950 {
951 	struct phy_device *phydev;
952 
953 	phydev = b53_get_phy_device(ds, port);
954 	if (!phydev)
955 		return;
956 
957 	phy_ethtool_get_stats(phydev, NULL, data);
958 }
959 EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
960 
961 int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
962 {
963 	struct b53_device *dev = ds->priv;
964 	struct phy_device *phydev;
965 
966 	if (sset == ETH_SS_STATS) {
967 		return b53_get_mib_size(dev);
968 	} else if (sset == ETH_SS_PHY_STATS) {
969 		phydev = b53_get_phy_device(ds, port);
970 		if (!phydev)
971 			return 0;
972 
973 		return phy_ethtool_get_sset_count(phydev);
974 	}
975 
976 	return 0;
977 }
978 EXPORT_SYMBOL(b53_get_sset_count);
979 
980 enum b53_devlink_resource_id {
981 	B53_DEVLINK_PARAM_ID_VLAN_TABLE,
982 };
983 
984 static u64 b53_devlink_vlan_table_get(void *priv)
985 {
986 	struct b53_device *dev = priv;
987 	struct b53_vlan *vl;
988 	unsigned int i;
989 	u64 count = 0;
990 
991 	for (i = 0; i < dev->num_vlans; i++) {
992 		vl = &dev->vlans[i];
993 		if (vl->members)
994 			count++;
995 	}
996 
997 	return count;
998 }
999 
1000 int b53_setup_devlink_resources(struct dsa_switch *ds)
1001 {
1002 	struct devlink_resource_size_params size_params;
1003 	struct b53_device *dev = ds->priv;
1004 	int err;
1005 
1006 	devlink_resource_size_params_init(&size_params, dev->num_vlans,
1007 					  dev->num_vlans,
1008 					  1, DEVLINK_RESOURCE_UNIT_ENTRY);
1009 
1010 	err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
1011 					    B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1012 					    DEVLINK_RESOURCE_ID_PARENT_TOP,
1013 					    &size_params);
1014 	if (err)
1015 		goto out;
1016 
1017 	dsa_devlink_resource_occ_get_register(ds,
1018 					      B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1019 					      b53_devlink_vlan_table_get, dev);
1020 
1021 	return 0;
1022 out:
1023 	dsa_devlink_resources_unregister(ds);
1024 	return err;
1025 }
1026 EXPORT_SYMBOL(b53_setup_devlink_resources);
1027 
1028 static int b53_setup(struct dsa_switch *ds)
1029 {
1030 	struct b53_device *dev = ds->priv;
1031 	unsigned int port;
1032 	int ret;
1033 
1034 	ret = b53_reset_switch(dev);
1035 	if (ret) {
1036 		dev_err(ds->dev, "failed to reset switch\n");
1037 		return ret;
1038 	}
1039 
1040 	b53_reset_mib(dev);
1041 
1042 	ret = b53_apply_config(dev);
1043 	if (ret) {
1044 		dev_err(ds->dev, "failed to apply configuration\n");
1045 		return ret;
1046 	}
1047 
1048 	/* Configure IMP/CPU port, disable all other ports. Enabled
1049 	 * ports will be configured with .port_enable
1050 	 */
1051 	for (port = 0; port < dev->num_ports; port++) {
1052 		if (dsa_is_cpu_port(ds, port))
1053 			b53_enable_cpu_port(dev, port);
1054 		else
1055 			b53_disable_port(ds, port);
1056 	}
1057 
1058 	/* Let DSA handle the case were multiple bridges span the same switch
1059 	 * device and different VLAN awareness settings are requested, which
1060 	 * would be breaking filtering semantics for any of the other bridge
1061 	 * devices. (not hardware supported)
1062 	 */
1063 	ds->vlan_filtering_is_global = true;
1064 
1065 	return b53_setup_devlink_resources(ds);
1066 }
1067 
1068 static void b53_teardown(struct dsa_switch *ds)
1069 {
1070 	dsa_devlink_resources_unregister(ds);
1071 }
1072 
1073 static void b53_force_link(struct b53_device *dev, int port, int link)
1074 {
1075 	u8 reg, val, off;
1076 
1077 	/* Override the port settings */
1078 	if (port == dev->cpu_port) {
1079 		off = B53_PORT_OVERRIDE_CTRL;
1080 		val = PORT_OVERRIDE_EN;
1081 	} else {
1082 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1083 		val = GMII_PO_EN;
1084 	}
1085 
1086 	b53_read8(dev, B53_CTRL_PAGE, off, &reg);
1087 	reg |= val;
1088 	if (link)
1089 		reg |= PORT_OVERRIDE_LINK;
1090 	else
1091 		reg &= ~PORT_OVERRIDE_LINK;
1092 	b53_write8(dev, B53_CTRL_PAGE, off, reg);
1093 }
1094 
1095 static void b53_force_port_config(struct b53_device *dev, int port,
1096 				  int speed, int duplex,
1097 				  bool tx_pause, bool rx_pause)
1098 {
1099 	u8 reg, val, off;
1100 
1101 	/* Override the port settings */
1102 	if (port == dev->cpu_port) {
1103 		off = B53_PORT_OVERRIDE_CTRL;
1104 		val = PORT_OVERRIDE_EN;
1105 	} else {
1106 		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1107 		val = GMII_PO_EN;
1108 	}
1109 
1110 	b53_read8(dev, B53_CTRL_PAGE, off, &reg);
1111 	reg |= val;
1112 	if (duplex == DUPLEX_FULL)
1113 		reg |= PORT_OVERRIDE_FULL_DUPLEX;
1114 	else
1115 		reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
1116 
1117 	switch (speed) {
1118 	case 2000:
1119 		reg |= PORT_OVERRIDE_SPEED_2000M;
1120 		fallthrough;
1121 	case SPEED_1000:
1122 		reg |= PORT_OVERRIDE_SPEED_1000M;
1123 		break;
1124 	case SPEED_100:
1125 		reg |= PORT_OVERRIDE_SPEED_100M;
1126 		break;
1127 	case SPEED_10:
1128 		reg |= PORT_OVERRIDE_SPEED_10M;
1129 		break;
1130 	default:
1131 		dev_err(dev->dev, "unknown speed: %d\n", speed);
1132 		return;
1133 	}
1134 
1135 	if (rx_pause)
1136 		reg |= PORT_OVERRIDE_RX_FLOW;
1137 	if (tx_pause)
1138 		reg |= PORT_OVERRIDE_TX_FLOW;
1139 
1140 	b53_write8(dev, B53_CTRL_PAGE, off, reg);
1141 }
1142 
1143 static void b53_adjust_link(struct dsa_switch *ds, int port,
1144 			    struct phy_device *phydev)
1145 {
1146 	struct b53_device *dev = ds->priv;
1147 	struct ethtool_eee *p = &dev->ports[port].eee;
1148 	u8 rgmii_ctrl = 0, reg = 0, off;
1149 	bool tx_pause = false;
1150 	bool rx_pause = false;
1151 
1152 	if (!phy_is_pseudo_fixed_link(phydev))
1153 		return;
1154 
1155 	/* Enable flow control on BCM5301x's CPU port */
1156 	if (is5301x(dev) && port == dev->cpu_port)
1157 		tx_pause = rx_pause = true;
1158 
1159 	if (phydev->pause) {
1160 		if (phydev->asym_pause)
1161 			tx_pause = true;
1162 		rx_pause = true;
1163 	}
1164 
1165 	b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
1166 			      tx_pause, rx_pause);
1167 	b53_force_link(dev, port, phydev->link);
1168 
1169 	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
1170 		if (port == 8)
1171 			off = B53_RGMII_CTRL_IMP;
1172 		else
1173 			off = B53_RGMII_CTRL_P(port);
1174 
1175 		/* Configure the port RGMII clock delay by DLL disabled and
1176 		 * tx_clk aligned timing (restoring to reset defaults)
1177 		 */
1178 		b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1179 		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
1180 				RGMII_CTRL_TIMING_SEL);
1181 
1182 		/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
1183 		 * sure that we enable the port TX clock internal delay to
1184 		 * account for this internal delay that is inserted, otherwise
1185 		 * the switch won't be able to receive correctly.
1186 		 *
1187 		 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
1188 		 * any delay neither on transmission nor reception, so the
1189 		 * BCM53125 must also be configured accordingly to account for
1190 		 * the lack of delay and introduce
1191 		 *
1192 		 * The BCM53125 switch has its RX clock and TX clock control
1193 		 * swapped, hence the reason why we modify the TX clock path in
1194 		 * the "RGMII" case
1195 		 */
1196 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
1197 			rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1198 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
1199 			rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
1200 		rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
1201 		b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1202 
1203 		dev_info(ds->dev, "Configured port %d for %s\n", port,
1204 			 phy_modes(phydev->interface));
1205 	}
1206 
1207 	/* configure MII port if necessary */
1208 	if (is5325(dev)) {
1209 		b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1210 			  &reg);
1211 
1212 		/* reverse mii needs to be enabled */
1213 		if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1214 			b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1215 				   reg | PORT_OVERRIDE_RV_MII_25);
1216 			b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1217 				  &reg);
1218 
1219 			if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1220 				dev_err(ds->dev,
1221 					"Failed to enable reverse MII mode\n");
1222 				return;
1223 			}
1224 		}
1225 	} else if (is5301x(dev)) {
1226 		if (port != dev->cpu_port) {
1227 			b53_force_port_config(dev, dev->cpu_port, 2000,
1228 					      DUPLEX_FULL, true, true);
1229 			b53_force_link(dev, dev->cpu_port, 1);
1230 		}
1231 	}
1232 
1233 	/* Re-negotiate EEE if it was enabled already */
1234 	p->eee_enabled = b53_eee_init(ds, port, phydev);
1235 }
1236 
1237 void b53_port_event(struct dsa_switch *ds, int port)
1238 {
1239 	struct b53_device *dev = ds->priv;
1240 	bool link;
1241 	u16 sts;
1242 
1243 	b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
1244 	link = !!(sts & BIT(port));
1245 	dsa_port_phylink_mac_change(ds, port, link);
1246 }
1247 EXPORT_SYMBOL(b53_port_event);
1248 
1249 void b53_phylink_validate(struct dsa_switch *ds, int port,
1250 			  unsigned long *supported,
1251 			  struct phylink_link_state *state)
1252 {
1253 	struct b53_device *dev = ds->priv;
1254 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
1255 
1256 	if (dev->ops->serdes_phylink_validate)
1257 		dev->ops->serdes_phylink_validate(dev, port, mask, state);
1258 
1259 	/* Allow all the expected bits */
1260 	phylink_set(mask, Autoneg);
1261 	phylink_set_port_modes(mask);
1262 	phylink_set(mask, Pause);
1263 	phylink_set(mask, Asym_Pause);
1264 
1265 	/* With the exclusion of 5325/5365, MII, Reverse MII and 802.3z, we
1266 	 * support Gigabit, including Half duplex.
1267 	 */
1268 	if (state->interface != PHY_INTERFACE_MODE_MII &&
1269 	    state->interface != PHY_INTERFACE_MODE_REVMII &&
1270 	    !phy_interface_mode_is_8023z(state->interface) &&
1271 	    !(is5325(dev) || is5365(dev))) {
1272 		phylink_set(mask, 1000baseT_Full);
1273 		phylink_set(mask, 1000baseT_Half);
1274 	}
1275 
1276 	if (!phy_interface_mode_is_8023z(state->interface)) {
1277 		phylink_set(mask, 10baseT_Half);
1278 		phylink_set(mask, 10baseT_Full);
1279 		phylink_set(mask, 100baseT_Half);
1280 		phylink_set(mask, 100baseT_Full);
1281 	}
1282 
1283 	bitmap_and(supported, supported, mask,
1284 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
1285 	bitmap_and(state->advertising, state->advertising, mask,
1286 		   __ETHTOOL_LINK_MODE_MASK_NBITS);
1287 
1288 	phylink_helper_basex_speed(state);
1289 }
1290 EXPORT_SYMBOL(b53_phylink_validate);
1291 
1292 int b53_phylink_mac_link_state(struct dsa_switch *ds, int port,
1293 			       struct phylink_link_state *state)
1294 {
1295 	struct b53_device *dev = ds->priv;
1296 	int ret = -EOPNOTSUPP;
1297 
1298 	if ((phy_interface_mode_is_8023z(state->interface) ||
1299 	     state->interface == PHY_INTERFACE_MODE_SGMII) &&
1300 	     dev->ops->serdes_link_state)
1301 		ret = dev->ops->serdes_link_state(dev, port, state);
1302 
1303 	return ret;
1304 }
1305 EXPORT_SYMBOL(b53_phylink_mac_link_state);
1306 
1307 void b53_phylink_mac_config(struct dsa_switch *ds, int port,
1308 			    unsigned int mode,
1309 			    const struct phylink_link_state *state)
1310 {
1311 	struct b53_device *dev = ds->priv;
1312 
1313 	if (mode == MLO_AN_PHY || mode == MLO_AN_FIXED)
1314 		return;
1315 
1316 	if ((phy_interface_mode_is_8023z(state->interface) ||
1317 	     state->interface == PHY_INTERFACE_MODE_SGMII) &&
1318 	     dev->ops->serdes_config)
1319 		dev->ops->serdes_config(dev, port, mode, state);
1320 }
1321 EXPORT_SYMBOL(b53_phylink_mac_config);
1322 
1323 void b53_phylink_mac_an_restart(struct dsa_switch *ds, int port)
1324 {
1325 	struct b53_device *dev = ds->priv;
1326 
1327 	if (dev->ops->serdes_an_restart)
1328 		dev->ops->serdes_an_restart(dev, port);
1329 }
1330 EXPORT_SYMBOL(b53_phylink_mac_an_restart);
1331 
1332 void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
1333 			       unsigned int mode,
1334 			       phy_interface_t interface)
1335 {
1336 	struct b53_device *dev = ds->priv;
1337 
1338 	if (mode == MLO_AN_PHY)
1339 		return;
1340 
1341 	if (mode == MLO_AN_FIXED) {
1342 		b53_force_link(dev, port, false);
1343 		return;
1344 	}
1345 
1346 	if (phy_interface_mode_is_8023z(interface) &&
1347 	    dev->ops->serdes_link_set)
1348 		dev->ops->serdes_link_set(dev, port, mode, interface, false);
1349 }
1350 EXPORT_SYMBOL(b53_phylink_mac_link_down);
1351 
1352 void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
1353 			     unsigned int mode,
1354 			     phy_interface_t interface,
1355 			     struct phy_device *phydev,
1356 			     int speed, int duplex,
1357 			     bool tx_pause, bool rx_pause)
1358 {
1359 	struct b53_device *dev = ds->priv;
1360 
1361 	if (mode == MLO_AN_PHY)
1362 		return;
1363 
1364 	if (mode == MLO_AN_FIXED) {
1365 		b53_force_port_config(dev, port, speed, duplex,
1366 				      tx_pause, rx_pause);
1367 		b53_force_link(dev, port, true);
1368 		return;
1369 	}
1370 
1371 	if (phy_interface_mode_is_8023z(interface) &&
1372 	    dev->ops->serdes_link_set)
1373 		dev->ops->serdes_link_set(dev, port, mode, interface, true);
1374 }
1375 EXPORT_SYMBOL(b53_phylink_mac_link_up);
1376 
1377 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
1378 		       struct switchdev_trans *trans)
1379 {
1380 	struct b53_device *dev = ds->priv;
1381 
1382 	if (switchdev_trans_ph_prepare(trans))
1383 		return 0;
1384 
1385 	b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
1386 
1387 	return 0;
1388 }
1389 EXPORT_SYMBOL(b53_vlan_filtering);
1390 
1391 int b53_vlan_prepare(struct dsa_switch *ds, int port,
1392 		     const struct switchdev_obj_port_vlan *vlan)
1393 {
1394 	struct b53_device *dev = ds->priv;
1395 
1396 	if ((is5325(dev) || is5365(dev)) && vlan->vid == 0)
1397 		return -EOPNOTSUPP;
1398 
1399 	/* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
1400 	 * receiving VLAN tagged frames at all, we can still allow the port to
1401 	 * be configured for egress untagged.
1402 	 */
1403 	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
1404 	    !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
1405 		return -EINVAL;
1406 
1407 	if (vlan->vid > dev->num_vlans)
1408 		return -ERANGE;
1409 
1410 	b53_enable_vlan(dev, true, ds->vlan_filtering);
1411 
1412 	return 0;
1413 }
1414 EXPORT_SYMBOL(b53_vlan_prepare);
1415 
1416 void b53_vlan_add(struct dsa_switch *ds, int port,
1417 		  const struct switchdev_obj_port_vlan *vlan)
1418 {
1419 	struct b53_device *dev = ds->priv;
1420 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1421 	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1422 	struct b53_vlan *vl;
1423 
1424 	vl = &dev->vlans[vlan->vid];
1425 
1426 	b53_get_vlan_entry(dev, vlan->vid, vl);
1427 
1428 	if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev))
1429 		untagged = true;
1430 
1431 	vl->members |= BIT(port);
1432 	if (untagged && !dsa_is_cpu_port(ds, port))
1433 		vl->untag |= BIT(port);
1434 	else
1435 		vl->untag &= ~BIT(port);
1436 
1437 	b53_set_vlan_entry(dev, vlan->vid, vl);
1438 	b53_fast_age_vlan(dev, vlan->vid);
1439 
1440 	if (pvid && !dsa_is_cpu_port(ds, port)) {
1441 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1442 			    vlan->vid);
1443 		b53_fast_age_vlan(dev, vlan->vid);
1444 	}
1445 }
1446 EXPORT_SYMBOL(b53_vlan_add);
1447 
1448 int b53_vlan_del(struct dsa_switch *ds, int port,
1449 		 const struct switchdev_obj_port_vlan *vlan)
1450 {
1451 	struct b53_device *dev = ds->priv;
1452 	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1453 	struct b53_vlan *vl;
1454 	u16 pvid;
1455 
1456 	b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1457 
1458 	vl = &dev->vlans[vlan->vid];
1459 
1460 	b53_get_vlan_entry(dev, vlan->vid, vl);
1461 
1462 	vl->members &= ~BIT(port);
1463 
1464 	if (pvid == vlan->vid)
1465 		pvid = b53_default_pvid(dev);
1466 
1467 	if (untagged && !dsa_is_cpu_port(ds, port))
1468 		vl->untag &= ~(BIT(port));
1469 
1470 	b53_set_vlan_entry(dev, vlan->vid, vl);
1471 	b53_fast_age_vlan(dev, vlan->vid);
1472 
1473 	b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
1474 	b53_fast_age_vlan(dev, pvid);
1475 
1476 	return 0;
1477 }
1478 EXPORT_SYMBOL(b53_vlan_del);
1479 
1480 /* Address Resolution Logic routines */
1481 static int b53_arl_op_wait(struct b53_device *dev)
1482 {
1483 	unsigned int timeout = 10;
1484 	u8 reg;
1485 
1486 	do {
1487 		b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1488 		if (!(reg & ARLTBL_START_DONE))
1489 			return 0;
1490 
1491 		usleep_range(1000, 2000);
1492 	} while (timeout--);
1493 
1494 	dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
1495 
1496 	return -ETIMEDOUT;
1497 }
1498 
1499 static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
1500 {
1501 	u8 reg;
1502 
1503 	if (op > ARLTBL_RW)
1504 		return -EINVAL;
1505 
1506 	b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1507 	reg |= ARLTBL_START_DONE;
1508 	if (op)
1509 		reg |= ARLTBL_RW;
1510 	else
1511 		reg &= ~ARLTBL_RW;
1512 	if (dev->vlan_enabled)
1513 		reg &= ~ARLTBL_IVL_SVL_SELECT;
1514 	else
1515 		reg |= ARLTBL_IVL_SVL_SELECT;
1516 	b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
1517 
1518 	return b53_arl_op_wait(dev);
1519 }
1520 
1521 static int b53_arl_read(struct b53_device *dev, u64 mac,
1522 			u16 vid, struct b53_arl_entry *ent, u8 *idx)
1523 {
1524 	DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
1525 	unsigned int i;
1526 	int ret;
1527 
1528 	ret = b53_arl_op_wait(dev);
1529 	if (ret)
1530 		return ret;
1531 
1532 	bitmap_zero(free_bins, dev->num_arl_bins);
1533 
1534 	/* Read the bins */
1535 	for (i = 0; i < dev->num_arl_bins; i++) {
1536 		u64 mac_vid;
1537 		u32 fwd_entry;
1538 
1539 		b53_read64(dev, B53_ARLIO_PAGE,
1540 			   B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
1541 		b53_read32(dev, B53_ARLIO_PAGE,
1542 			   B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
1543 		b53_arl_to_entry(ent, mac_vid, fwd_entry);
1544 
1545 		if (!(fwd_entry & ARLTBL_VALID)) {
1546 			set_bit(i, free_bins);
1547 			continue;
1548 		}
1549 		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
1550 			continue;
1551 		if (dev->vlan_enabled &&
1552 		    ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
1553 			continue;
1554 		*idx = i;
1555 		return 0;
1556 	}
1557 
1558 	if (bitmap_weight(free_bins, dev->num_arl_bins) == 0)
1559 		return -ENOSPC;
1560 
1561 	*idx = find_first_bit(free_bins, dev->num_arl_bins);
1562 
1563 	return -ENOENT;
1564 }
1565 
1566 static int b53_arl_op(struct b53_device *dev, int op, int port,
1567 		      const unsigned char *addr, u16 vid, bool is_valid)
1568 {
1569 	struct b53_arl_entry ent;
1570 	u32 fwd_entry;
1571 	u64 mac, mac_vid = 0;
1572 	u8 idx = 0;
1573 	int ret;
1574 
1575 	/* Convert the array into a 64-bit MAC */
1576 	mac = ether_addr_to_u64(addr);
1577 
1578 	/* Perform a read for the given MAC and VID */
1579 	b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
1580 	b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
1581 
1582 	/* Issue a read operation for this MAC */
1583 	ret = b53_arl_rw_op(dev, 1);
1584 	if (ret)
1585 		return ret;
1586 
1587 	ret = b53_arl_read(dev, mac, vid, &ent, &idx);
1588 
1589 	/* If this is a read, just finish now */
1590 	if (op)
1591 		return ret;
1592 
1593 	switch (ret) {
1594 	case -ETIMEDOUT:
1595 		return ret;
1596 	case -ENOSPC:
1597 		dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
1598 			addr, vid);
1599 		return is_valid ? ret : 0;
1600 	case -ENOENT:
1601 		/* We could not find a matching MAC, so reset to a new entry */
1602 		dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
1603 			addr, vid, idx);
1604 		fwd_entry = 0;
1605 		break;
1606 	default:
1607 		dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
1608 			addr, vid, idx);
1609 		break;
1610 	}
1611 
1612 	/* For multicast address, the port is a bitmask and the validity
1613 	 * is determined by having at least one port being still active
1614 	 */
1615 	if (!is_multicast_ether_addr(addr)) {
1616 		ent.port = port;
1617 		ent.is_valid = is_valid;
1618 	} else {
1619 		if (is_valid)
1620 			ent.port |= BIT(port);
1621 		else
1622 			ent.port &= ~BIT(port);
1623 
1624 		ent.is_valid = !!(ent.port);
1625 	}
1626 
1627 	ent.vid = vid;
1628 	ent.is_static = true;
1629 	ent.is_age = false;
1630 	memcpy(ent.mac, addr, ETH_ALEN);
1631 	b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
1632 
1633 	b53_write64(dev, B53_ARLIO_PAGE,
1634 		    B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
1635 	b53_write32(dev, B53_ARLIO_PAGE,
1636 		    B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
1637 
1638 	return b53_arl_rw_op(dev, 0);
1639 }
1640 
1641 int b53_fdb_add(struct dsa_switch *ds, int port,
1642 		const unsigned char *addr, u16 vid)
1643 {
1644 	struct b53_device *priv = ds->priv;
1645 
1646 	/* 5325 and 5365 require some more massaging, but could
1647 	 * be supported eventually
1648 	 */
1649 	if (is5325(priv) || is5365(priv))
1650 		return -EOPNOTSUPP;
1651 
1652 	return b53_arl_op(priv, 0, port, addr, vid, true);
1653 }
1654 EXPORT_SYMBOL(b53_fdb_add);
1655 
1656 int b53_fdb_del(struct dsa_switch *ds, int port,
1657 		const unsigned char *addr, u16 vid)
1658 {
1659 	struct b53_device *priv = ds->priv;
1660 
1661 	return b53_arl_op(priv, 0, port, addr, vid, false);
1662 }
1663 EXPORT_SYMBOL(b53_fdb_del);
1664 
1665 static int b53_arl_search_wait(struct b53_device *dev)
1666 {
1667 	unsigned int timeout = 1000;
1668 	u8 reg;
1669 
1670 	do {
1671 		b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
1672 		if (!(reg & ARL_SRCH_STDN))
1673 			return 0;
1674 
1675 		if (reg & ARL_SRCH_VLID)
1676 			return 0;
1677 
1678 		usleep_range(1000, 2000);
1679 	} while (timeout--);
1680 
1681 	return -ETIMEDOUT;
1682 }
1683 
1684 static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
1685 			      struct b53_arl_entry *ent)
1686 {
1687 	u64 mac_vid;
1688 	u32 fwd_entry;
1689 
1690 	b53_read64(dev, B53_ARLIO_PAGE,
1691 		   B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
1692 	b53_read32(dev, B53_ARLIO_PAGE,
1693 		   B53_ARL_SRCH_RSTL(idx), &fwd_entry);
1694 	b53_arl_to_entry(ent, mac_vid, fwd_entry);
1695 }
1696 
1697 static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
1698 			dsa_fdb_dump_cb_t *cb, void *data)
1699 {
1700 	if (!ent->is_valid)
1701 		return 0;
1702 
1703 	if (port != ent->port)
1704 		return 0;
1705 
1706 	return cb(ent->mac, ent->vid, ent->is_static, data);
1707 }
1708 
1709 int b53_fdb_dump(struct dsa_switch *ds, int port,
1710 		 dsa_fdb_dump_cb_t *cb, void *data)
1711 {
1712 	struct b53_device *priv = ds->priv;
1713 	struct b53_arl_entry results[2];
1714 	unsigned int count = 0;
1715 	int ret;
1716 	u8 reg;
1717 
1718 	/* Start search operation */
1719 	reg = ARL_SRCH_STDN;
1720 	b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
1721 
1722 	do {
1723 		ret = b53_arl_search_wait(priv);
1724 		if (ret)
1725 			return ret;
1726 
1727 		b53_arl_search_rd(priv, 0, &results[0]);
1728 		ret = b53_fdb_copy(port, &results[0], cb, data);
1729 		if (ret)
1730 			return ret;
1731 
1732 		if (priv->num_arl_bins > 2) {
1733 			b53_arl_search_rd(priv, 1, &results[1]);
1734 			ret = b53_fdb_copy(port, &results[1], cb, data);
1735 			if (ret)
1736 				return ret;
1737 
1738 			if (!results[0].is_valid && !results[1].is_valid)
1739 				break;
1740 		}
1741 
1742 	} while (count++ < b53_max_arl_entries(priv) / 2);
1743 
1744 	return 0;
1745 }
1746 EXPORT_SYMBOL(b53_fdb_dump);
1747 
1748 int b53_mdb_prepare(struct dsa_switch *ds, int port,
1749 		    const struct switchdev_obj_port_mdb *mdb)
1750 {
1751 	struct b53_device *priv = ds->priv;
1752 
1753 	/* 5325 and 5365 require some more massaging, but could
1754 	 * be supported eventually
1755 	 */
1756 	if (is5325(priv) || is5365(priv))
1757 		return -EOPNOTSUPP;
1758 
1759 	return 0;
1760 }
1761 EXPORT_SYMBOL(b53_mdb_prepare);
1762 
1763 void b53_mdb_add(struct dsa_switch *ds, int port,
1764 		 const struct switchdev_obj_port_mdb *mdb)
1765 {
1766 	struct b53_device *priv = ds->priv;
1767 	int ret;
1768 
1769 	ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true);
1770 	if (ret)
1771 		dev_err(ds->dev, "failed to add MDB entry\n");
1772 }
1773 EXPORT_SYMBOL(b53_mdb_add);
1774 
1775 int b53_mdb_del(struct dsa_switch *ds, int port,
1776 		const struct switchdev_obj_port_mdb *mdb)
1777 {
1778 	struct b53_device *priv = ds->priv;
1779 	int ret;
1780 
1781 	ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false);
1782 	if (ret)
1783 		dev_err(ds->dev, "failed to delete MDB entry\n");
1784 
1785 	return ret;
1786 }
1787 EXPORT_SYMBOL(b53_mdb_del);
1788 
1789 int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
1790 {
1791 	struct b53_device *dev = ds->priv;
1792 	s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1793 	u16 pvlan, reg;
1794 	unsigned int i;
1795 
1796 	/* On 7278, port 7 which connects to the ASP should only receive
1797 	 * traffic from matching CFP rules.
1798 	 */
1799 	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
1800 		return -EINVAL;
1801 
1802 	/* Make this port leave the all VLANs join since we will have proper
1803 	 * VLAN entries from now on
1804 	 */
1805 	if (is58xx(dev)) {
1806 		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1807 		reg &= ~BIT(port);
1808 		if ((reg & BIT(cpu_port)) == BIT(cpu_port))
1809 			reg &= ~BIT(cpu_port);
1810 		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1811 	}
1812 
1813 	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1814 
1815 	b53_for_each_port(dev, i) {
1816 		if (dsa_to_port(ds, i)->bridge_dev != br)
1817 			continue;
1818 
1819 		/* Add this local port to the remote port VLAN control
1820 		 * membership and update the remote port bitmask
1821 		 */
1822 		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1823 		reg |= BIT(port);
1824 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1825 		dev->ports[i].vlan_ctl_mask = reg;
1826 
1827 		pvlan |= BIT(i);
1828 	}
1829 
1830 	/* Configure the local port VLAN control membership to include
1831 	 * remote ports and update the local port bitmask
1832 	 */
1833 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1834 	dev->ports[port].vlan_ctl_mask = pvlan;
1835 
1836 	return 0;
1837 }
1838 EXPORT_SYMBOL(b53_br_join);
1839 
1840 void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
1841 {
1842 	struct b53_device *dev = ds->priv;
1843 	struct b53_vlan *vl = &dev->vlans[0];
1844 	s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1845 	unsigned int i;
1846 	u16 pvlan, reg, pvid;
1847 
1848 	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1849 
1850 	b53_for_each_port(dev, i) {
1851 		/* Don't touch the remaining ports */
1852 		if (dsa_to_port(ds, i)->bridge_dev != br)
1853 			continue;
1854 
1855 		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1856 		reg &= ~BIT(port);
1857 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1858 		dev->ports[port].vlan_ctl_mask = reg;
1859 
1860 		/* Prevent self removal to preserve isolation */
1861 		if (port != i)
1862 			pvlan &= ~BIT(i);
1863 	}
1864 
1865 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1866 	dev->ports[port].vlan_ctl_mask = pvlan;
1867 
1868 	pvid = b53_default_pvid(dev);
1869 
1870 	/* Make this port join all VLANs without VLAN entries */
1871 	if (is58xx(dev)) {
1872 		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1873 		reg |= BIT(port);
1874 		if (!(reg & BIT(cpu_port)))
1875 			reg |= BIT(cpu_port);
1876 		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1877 	} else {
1878 		b53_get_vlan_entry(dev, pvid, vl);
1879 		vl->members |= BIT(port) | BIT(cpu_port);
1880 		vl->untag |= BIT(port) | BIT(cpu_port);
1881 		b53_set_vlan_entry(dev, pvid, vl);
1882 	}
1883 }
1884 EXPORT_SYMBOL(b53_br_leave);
1885 
1886 void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
1887 {
1888 	struct b53_device *dev = ds->priv;
1889 	u8 hw_state;
1890 	u8 reg;
1891 
1892 	switch (state) {
1893 	case BR_STATE_DISABLED:
1894 		hw_state = PORT_CTRL_DIS_STATE;
1895 		break;
1896 	case BR_STATE_LISTENING:
1897 		hw_state = PORT_CTRL_LISTEN_STATE;
1898 		break;
1899 	case BR_STATE_LEARNING:
1900 		hw_state = PORT_CTRL_LEARN_STATE;
1901 		break;
1902 	case BR_STATE_FORWARDING:
1903 		hw_state = PORT_CTRL_FWD_STATE;
1904 		break;
1905 	case BR_STATE_BLOCKING:
1906 		hw_state = PORT_CTRL_BLOCK_STATE;
1907 		break;
1908 	default:
1909 		dev_err(ds->dev, "invalid STP state: %d\n", state);
1910 		return;
1911 	}
1912 
1913 	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
1914 	reg &= ~PORT_CTRL_STP_STATE_MASK;
1915 	reg |= hw_state;
1916 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
1917 }
1918 EXPORT_SYMBOL(b53_br_set_stp_state);
1919 
1920 void b53_br_fast_age(struct dsa_switch *ds, int port)
1921 {
1922 	struct b53_device *dev = ds->priv;
1923 
1924 	if (b53_fast_age_port(dev, port))
1925 		dev_err(ds->dev, "fast ageing failed\n");
1926 }
1927 EXPORT_SYMBOL(b53_br_fast_age);
1928 
1929 int b53_br_egress_floods(struct dsa_switch *ds, int port,
1930 			 bool unicast, bool multicast)
1931 {
1932 	struct b53_device *dev = ds->priv;
1933 	u16 uc, mc;
1934 
1935 	b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
1936 	if (unicast)
1937 		uc |= BIT(port);
1938 	else
1939 		uc &= ~BIT(port);
1940 	b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
1941 
1942 	b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
1943 	if (multicast)
1944 		mc |= BIT(port);
1945 	else
1946 		mc &= ~BIT(port);
1947 	b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
1948 
1949 	b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
1950 	if (multicast)
1951 		mc |= BIT(port);
1952 	else
1953 		mc &= ~BIT(port);
1954 	b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
1955 
1956 	return 0;
1957 
1958 }
1959 EXPORT_SYMBOL(b53_br_egress_floods);
1960 
1961 static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
1962 {
1963 	/* Broadcom switches will accept enabling Broadcom tags on the
1964 	 * following ports: 5, 7 and 8, any other port is not supported
1965 	 */
1966 	switch (port) {
1967 	case B53_CPU_PORT_25:
1968 	case 7:
1969 	case B53_CPU_PORT:
1970 		return true;
1971 	}
1972 
1973 	return false;
1974 }
1975 
1976 static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port,
1977 				     enum dsa_tag_protocol tag_protocol)
1978 {
1979 	bool ret = b53_possible_cpu_port(ds, port);
1980 
1981 	if (!ret) {
1982 		dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
1983 			 port);
1984 		return ret;
1985 	}
1986 
1987 	switch (tag_protocol) {
1988 	case DSA_TAG_PROTO_BRCM:
1989 	case DSA_TAG_PROTO_BRCM_PREPEND:
1990 		dev_warn(ds->dev,
1991 			 "Port %d is stacked to Broadcom tag switch\n", port);
1992 		ret = false;
1993 		break;
1994 	default:
1995 		ret = true;
1996 		break;
1997 	}
1998 
1999 	return ret;
2000 }
2001 
2002 enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
2003 					   enum dsa_tag_protocol mprot)
2004 {
2005 	struct b53_device *dev = ds->priv;
2006 
2007 	/* Older models (5325, 5365) support a different tag format that we do
2008 	 * not support in net/dsa/tag_brcm.c yet.
2009 	 */
2010 	if (is5325(dev) || is5365(dev) ||
2011 	    !b53_can_enable_brcm_tags(ds, port, mprot)) {
2012 		dev->tag_protocol = DSA_TAG_PROTO_NONE;
2013 		goto out;
2014 	}
2015 
2016 	/* Broadcom BCM58xx chips have a flow accelerator on Port 8
2017 	 * which requires us to use the prepended Broadcom tag type
2018 	 */
2019 	if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
2020 		dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
2021 		goto out;
2022 	}
2023 
2024 	dev->tag_protocol = DSA_TAG_PROTO_BRCM;
2025 out:
2026 	return dev->tag_protocol;
2027 }
2028 EXPORT_SYMBOL(b53_get_tag_protocol);
2029 
2030 int b53_mirror_add(struct dsa_switch *ds, int port,
2031 		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress)
2032 {
2033 	struct b53_device *dev = ds->priv;
2034 	u16 reg, loc;
2035 
2036 	if (ingress)
2037 		loc = B53_IG_MIR_CTL;
2038 	else
2039 		loc = B53_EG_MIR_CTL;
2040 
2041 	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
2042 	reg |= BIT(port);
2043 	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2044 
2045 	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
2046 	reg &= ~CAP_PORT_MASK;
2047 	reg |= mirror->to_local_port;
2048 	reg |= MIRROR_EN;
2049 	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2050 
2051 	return 0;
2052 }
2053 EXPORT_SYMBOL(b53_mirror_add);
2054 
2055 void b53_mirror_del(struct dsa_switch *ds, int port,
2056 		    struct dsa_mall_mirror_tc_entry *mirror)
2057 {
2058 	struct b53_device *dev = ds->priv;
2059 	bool loc_disable = false, other_loc_disable = false;
2060 	u16 reg, loc;
2061 
2062 	if (mirror->ingress)
2063 		loc = B53_IG_MIR_CTL;
2064 	else
2065 		loc = B53_EG_MIR_CTL;
2066 
2067 	/* Update the desired ingress/egress register */
2068 	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
2069 	reg &= ~BIT(port);
2070 	if (!(reg & MIRROR_MASK))
2071 		loc_disable = true;
2072 	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2073 
2074 	/* Now look at the other one to know if we can disable mirroring
2075 	 * entirely
2076 	 */
2077 	if (mirror->ingress)
2078 		b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, &reg);
2079 	else
2080 		b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, &reg);
2081 	if (!(reg & MIRROR_MASK))
2082 		other_loc_disable = true;
2083 
2084 	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
2085 	/* Both no longer have ports, let's disable mirroring */
2086 	if (loc_disable && other_loc_disable) {
2087 		reg &= ~MIRROR_EN;
2088 		reg &= ~mirror->to_local_port;
2089 	}
2090 	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2091 }
2092 EXPORT_SYMBOL(b53_mirror_del);
2093 
2094 void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
2095 {
2096 	struct b53_device *dev = ds->priv;
2097 	u16 reg;
2098 
2099 	b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
2100 	if (enable)
2101 		reg |= BIT(port);
2102 	else
2103 		reg &= ~BIT(port);
2104 	b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
2105 }
2106 EXPORT_SYMBOL(b53_eee_enable_set);
2107 
2108 
2109 /* Returns 0 if EEE was not enabled, or 1 otherwise
2110  */
2111 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
2112 {
2113 	int ret;
2114 
2115 	ret = phy_init_eee(phy, 0);
2116 	if (ret)
2117 		return 0;
2118 
2119 	b53_eee_enable_set(ds, port, true);
2120 
2121 	return 1;
2122 }
2123 EXPORT_SYMBOL(b53_eee_init);
2124 
2125 int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2126 {
2127 	struct b53_device *dev = ds->priv;
2128 	struct ethtool_eee *p = &dev->ports[port].eee;
2129 	u16 reg;
2130 
2131 	if (is5325(dev) || is5365(dev))
2132 		return -EOPNOTSUPP;
2133 
2134 	b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
2135 	e->eee_enabled = p->eee_enabled;
2136 	e->eee_active = !!(reg & BIT(port));
2137 
2138 	return 0;
2139 }
2140 EXPORT_SYMBOL(b53_get_mac_eee);
2141 
2142 int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2143 {
2144 	struct b53_device *dev = ds->priv;
2145 	struct ethtool_eee *p = &dev->ports[port].eee;
2146 
2147 	if (is5325(dev) || is5365(dev))
2148 		return -EOPNOTSUPP;
2149 
2150 	p->eee_enabled = e->eee_enabled;
2151 	b53_eee_enable_set(ds, port, e->eee_enabled);
2152 
2153 	return 0;
2154 }
2155 EXPORT_SYMBOL(b53_set_mac_eee);
2156 
2157 static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
2158 {
2159 	struct b53_device *dev = ds->priv;
2160 	bool enable_jumbo;
2161 	bool allow_10_100;
2162 
2163 	if (is5325(dev) || is5365(dev))
2164 		return -EOPNOTSUPP;
2165 
2166 	enable_jumbo = (mtu >= JMS_MIN_SIZE);
2167 	allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
2168 
2169 	return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
2170 }
2171 
2172 static int b53_get_max_mtu(struct dsa_switch *ds, int port)
2173 {
2174 	return JMS_MAX_SIZE;
2175 }
2176 
2177 static const struct dsa_switch_ops b53_switch_ops = {
2178 	.get_tag_protocol	= b53_get_tag_protocol,
2179 	.setup			= b53_setup,
2180 	.teardown		= b53_teardown,
2181 	.get_strings		= b53_get_strings,
2182 	.get_ethtool_stats	= b53_get_ethtool_stats,
2183 	.get_sset_count		= b53_get_sset_count,
2184 	.get_ethtool_phy_stats	= b53_get_ethtool_phy_stats,
2185 	.phy_read		= b53_phy_read16,
2186 	.phy_write		= b53_phy_write16,
2187 	.adjust_link		= b53_adjust_link,
2188 	.phylink_validate	= b53_phylink_validate,
2189 	.phylink_mac_link_state	= b53_phylink_mac_link_state,
2190 	.phylink_mac_config	= b53_phylink_mac_config,
2191 	.phylink_mac_an_restart	= b53_phylink_mac_an_restart,
2192 	.phylink_mac_link_down	= b53_phylink_mac_link_down,
2193 	.phylink_mac_link_up	= b53_phylink_mac_link_up,
2194 	.port_enable		= b53_enable_port,
2195 	.port_disable		= b53_disable_port,
2196 	.get_mac_eee		= b53_get_mac_eee,
2197 	.set_mac_eee		= b53_set_mac_eee,
2198 	.port_bridge_join	= b53_br_join,
2199 	.port_bridge_leave	= b53_br_leave,
2200 	.port_stp_state_set	= b53_br_set_stp_state,
2201 	.port_fast_age		= b53_br_fast_age,
2202 	.port_egress_floods	= b53_br_egress_floods,
2203 	.port_vlan_filtering	= b53_vlan_filtering,
2204 	.port_vlan_prepare	= b53_vlan_prepare,
2205 	.port_vlan_add		= b53_vlan_add,
2206 	.port_vlan_del		= b53_vlan_del,
2207 	.port_fdb_dump		= b53_fdb_dump,
2208 	.port_fdb_add		= b53_fdb_add,
2209 	.port_fdb_del		= b53_fdb_del,
2210 	.port_mirror_add	= b53_mirror_add,
2211 	.port_mirror_del	= b53_mirror_del,
2212 	.port_mdb_prepare	= b53_mdb_prepare,
2213 	.port_mdb_add		= b53_mdb_add,
2214 	.port_mdb_del		= b53_mdb_del,
2215 	.port_max_mtu		= b53_get_max_mtu,
2216 	.port_change_mtu	= b53_change_mtu,
2217 };
2218 
2219 struct b53_chip_data {
2220 	u32 chip_id;
2221 	const char *dev_name;
2222 	u16 vlans;
2223 	u16 enabled_ports;
2224 	u8 cpu_port;
2225 	u8 vta_regs[3];
2226 	u8 arl_bins;
2227 	u16 arl_buckets;
2228 	u8 duplex_reg;
2229 	u8 jumbo_pm_reg;
2230 	u8 jumbo_size_reg;
2231 };
2232 
2233 #define B53_VTA_REGS	\
2234 	{ B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
2235 #define B53_VTA_REGS_9798 \
2236 	{ B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
2237 #define B53_VTA_REGS_63XX \
2238 	{ B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
2239 
2240 static const struct b53_chip_data b53_switch_chips[] = {
2241 	{
2242 		.chip_id = BCM5325_DEVICE_ID,
2243 		.dev_name = "BCM5325",
2244 		.vlans = 16,
2245 		.enabled_ports = 0x1f,
2246 		.arl_bins = 2,
2247 		.arl_buckets = 1024,
2248 		.cpu_port = B53_CPU_PORT_25,
2249 		.duplex_reg = B53_DUPLEX_STAT_FE,
2250 	},
2251 	{
2252 		.chip_id = BCM5365_DEVICE_ID,
2253 		.dev_name = "BCM5365",
2254 		.vlans = 256,
2255 		.enabled_ports = 0x1f,
2256 		.arl_bins = 2,
2257 		.arl_buckets = 1024,
2258 		.cpu_port = B53_CPU_PORT_25,
2259 		.duplex_reg = B53_DUPLEX_STAT_FE,
2260 	},
2261 	{
2262 		.chip_id = BCM5389_DEVICE_ID,
2263 		.dev_name = "BCM5389",
2264 		.vlans = 4096,
2265 		.enabled_ports = 0x1f,
2266 		.arl_bins = 4,
2267 		.arl_buckets = 1024,
2268 		.cpu_port = B53_CPU_PORT,
2269 		.vta_regs = B53_VTA_REGS,
2270 		.duplex_reg = B53_DUPLEX_STAT_GE,
2271 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2272 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2273 	},
2274 	{
2275 		.chip_id = BCM5395_DEVICE_ID,
2276 		.dev_name = "BCM5395",
2277 		.vlans = 4096,
2278 		.enabled_ports = 0x1f,
2279 		.arl_bins = 4,
2280 		.arl_buckets = 1024,
2281 		.cpu_port = B53_CPU_PORT,
2282 		.vta_regs = B53_VTA_REGS,
2283 		.duplex_reg = B53_DUPLEX_STAT_GE,
2284 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2285 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2286 	},
2287 	{
2288 		.chip_id = BCM5397_DEVICE_ID,
2289 		.dev_name = "BCM5397",
2290 		.vlans = 4096,
2291 		.enabled_ports = 0x1f,
2292 		.arl_bins = 4,
2293 		.arl_buckets = 1024,
2294 		.cpu_port = B53_CPU_PORT,
2295 		.vta_regs = B53_VTA_REGS_9798,
2296 		.duplex_reg = B53_DUPLEX_STAT_GE,
2297 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2298 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2299 	},
2300 	{
2301 		.chip_id = BCM5398_DEVICE_ID,
2302 		.dev_name = "BCM5398",
2303 		.vlans = 4096,
2304 		.enabled_ports = 0x7f,
2305 		.arl_bins = 4,
2306 		.arl_buckets = 1024,
2307 		.cpu_port = B53_CPU_PORT,
2308 		.vta_regs = B53_VTA_REGS_9798,
2309 		.duplex_reg = B53_DUPLEX_STAT_GE,
2310 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2311 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2312 	},
2313 	{
2314 		.chip_id = BCM53115_DEVICE_ID,
2315 		.dev_name = "BCM53115",
2316 		.vlans = 4096,
2317 		.enabled_ports = 0x1f,
2318 		.arl_bins = 4,
2319 		.arl_buckets = 1024,
2320 		.vta_regs = B53_VTA_REGS,
2321 		.cpu_port = B53_CPU_PORT,
2322 		.duplex_reg = B53_DUPLEX_STAT_GE,
2323 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2324 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2325 	},
2326 	{
2327 		.chip_id = BCM53125_DEVICE_ID,
2328 		.dev_name = "BCM53125",
2329 		.vlans = 4096,
2330 		.enabled_ports = 0xff,
2331 		.arl_bins = 4,
2332 		.arl_buckets = 1024,
2333 		.cpu_port = B53_CPU_PORT,
2334 		.vta_regs = B53_VTA_REGS,
2335 		.duplex_reg = B53_DUPLEX_STAT_GE,
2336 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2337 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2338 	},
2339 	{
2340 		.chip_id = BCM53128_DEVICE_ID,
2341 		.dev_name = "BCM53128",
2342 		.vlans = 4096,
2343 		.enabled_ports = 0x1ff,
2344 		.arl_bins = 4,
2345 		.arl_buckets = 1024,
2346 		.cpu_port = B53_CPU_PORT,
2347 		.vta_regs = B53_VTA_REGS,
2348 		.duplex_reg = B53_DUPLEX_STAT_GE,
2349 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2350 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2351 	},
2352 	{
2353 		.chip_id = BCM63XX_DEVICE_ID,
2354 		.dev_name = "BCM63xx",
2355 		.vlans = 4096,
2356 		.enabled_ports = 0, /* pdata must provide them */
2357 		.arl_bins = 4,
2358 		.arl_buckets = 1024,
2359 		.cpu_port = B53_CPU_PORT,
2360 		.vta_regs = B53_VTA_REGS_63XX,
2361 		.duplex_reg = B53_DUPLEX_STAT_63XX,
2362 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2363 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2364 	},
2365 	{
2366 		.chip_id = BCM53010_DEVICE_ID,
2367 		.dev_name = "BCM53010",
2368 		.vlans = 4096,
2369 		.enabled_ports = 0x1f,
2370 		.arl_bins = 4,
2371 		.arl_buckets = 1024,
2372 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2373 		.vta_regs = B53_VTA_REGS,
2374 		.duplex_reg = B53_DUPLEX_STAT_GE,
2375 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2376 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2377 	},
2378 	{
2379 		.chip_id = BCM53011_DEVICE_ID,
2380 		.dev_name = "BCM53011",
2381 		.vlans = 4096,
2382 		.enabled_ports = 0x1bf,
2383 		.arl_bins = 4,
2384 		.arl_buckets = 1024,
2385 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2386 		.vta_regs = B53_VTA_REGS,
2387 		.duplex_reg = B53_DUPLEX_STAT_GE,
2388 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2389 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2390 	},
2391 	{
2392 		.chip_id = BCM53012_DEVICE_ID,
2393 		.dev_name = "BCM53012",
2394 		.vlans = 4096,
2395 		.enabled_ports = 0x1bf,
2396 		.arl_bins = 4,
2397 		.arl_buckets = 1024,
2398 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2399 		.vta_regs = B53_VTA_REGS,
2400 		.duplex_reg = B53_DUPLEX_STAT_GE,
2401 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2402 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2403 	},
2404 	{
2405 		.chip_id = BCM53018_DEVICE_ID,
2406 		.dev_name = "BCM53018",
2407 		.vlans = 4096,
2408 		.enabled_ports = 0x1f,
2409 		.arl_bins = 4,
2410 		.arl_buckets = 1024,
2411 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2412 		.vta_regs = B53_VTA_REGS,
2413 		.duplex_reg = B53_DUPLEX_STAT_GE,
2414 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2415 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2416 	},
2417 	{
2418 		.chip_id = BCM53019_DEVICE_ID,
2419 		.dev_name = "BCM53019",
2420 		.vlans = 4096,
2421 		.enabled_ports = 0x1f,
2422 		.arl_bins = 4,
2423 		.arl_buckets = 1024,
2424 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
2425 		.vta_regs = B53_VTA_REGS,
2426 		.duplex_reg = B53_DUPLEX_STAT_GE,
2427 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2428 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2429 	},
2430 	{
2431 		.chip_id = BCM58XX_DEVICE_ID,
2432 		.dev_name = "BCM585xx/586xx/88312",
2433 		.vlans	= 4096,
2434 		.enabled_ports = 0x1ff,
2435 		.arl_bins = 4,
2436 		.arl_buckets = 1024,
2437 		.cpu_port = B53_CPU_PORT,
2438 		.vta_regs = B53_VTA_REGS,
2439 		.duplex_reg = B53_DUPLEX_STAT_GE,
2440 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2441 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2442 	},
2443 	{
2444 		.chip_id = BCM583XX_DEVICE_ID,
2445 		.dev_name = "BCM583xx/11360",
2446 		.vlans = 4096,
2447 		.enabled_ports = 0x103,
2448 		.arl_bins = 4,
2449 		.arl_buckets = 1024,
2450 		.cpu_port = B53_CPU_PORT,
2451 		.vta_regs = B53_VTA_REGS,
2452 		.duplex_reg = B53_DUPLEX_STAT_GE,
2453 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2454 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2455 	},
2456 	/* Starfighter 2 */
2457 	{
2458 		.chip_id = BCM4908_DEVICE_ID,
2459 		.dev_name = "BCM4908",
2460 		.vlans = 4096,
2461 		.enabled_ports = 0x1bf,
2462 		.arl_bins = 4,
2463 		.arl_buckets = 256,
2464 		.cpu_port = 8, /* TODO: ports 4, 5, 8 */
2465 		.vta_regs = B53_VTA_REGS,
2466 		.duplex_reg = B53_DUPLEX_STAT_GE,
2467 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2468 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2469 	},
2470 	{
2471 		.chip_id = BCM7445_DEVICE_ID,
2472 		.dev_name = "BCM7445",
2473 		.vlans	= 4096,
2474 		.enabled_ports = 0x1ff,
2475 		.arl_bins = 4,
2476 		.arl_buckets = 1024,
2477 		.cpu_port = B53_CPU_PORT,
2478 		.vta_regs = B53_VTA_REGS,
2479 		.duplex_reg = B53_DUPLEX_STAT_GE,
2480 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2481 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2482 	},
2483 	{
2484 		.chip_id = BCM7278_DEVICE_ID,
2485 		.dev_name = "BCM7278",
2486 		.vlans = 4096,
2487 		.enabled_ports = 0x1ff,
2488 		.arl_bins = 4,
2489 		.arl_buckets = 256,
2490 		.cpu_port = B53_CPU_PORT,
2491 		.vta_regs = B53_VTA_REGS,
2492 		.duplex_reg = B53_DUPLEX_STAT_GE,
2493 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2494 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2495 	},
2496 };
2497 
2498 static int b53_switch_init(struct b53_device *dev)
2499 {
2500 	unsigned int i;
2501 	int ret;
2502 
2503 	for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
2504 		const struct b53_chip_data *chip = &b53_switch_chips[i];
2505 
2506 		if (chip->chip_id == dev->chip_id) {
2507 			if (!dev->enabled_ports)
2508 				dev->enabled_ports = chip->enabled_ports;
2509 			dev->name = chip->dev_name;
2510 			dev->duplex_reg = chip->duplex_reg;
2511 			dev->vta_regs[0] = chip->vta_regs[0];
2512 			dev->vta_regs[1] = chip->vta_regs[1];
2513 			dev->vta_regs[2] = chip->vta_regs[2];
2514 			dev->jumbo_pm_reg = chip->jumbo_pm_reg;
2515 			dev->cpu_port = chip->cpu_port;
2516 			dev->num_vlans = chip->vlans;
2517 			dev->num_arl_bins = chip->arl_bins;
2518 			dev->num_arl_buckets = chip->arl_buckets;
2519 			break;
2520 		}
2521 	}
2522 
2523 	/* check which BCM5325x version we have */
2524 	if (is5325(dev)) {
2525 		u8 vc4;
2526 
2527 		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
2528 
2529 		/* check reserved bits */
2530 		switch (vc4 & 3) {
2531 		case 1:
2532 			/* BCM5325E */
2533 			break;
2534 		case 3:
2535 			/* BCM5325F - do not use port 4 */
2536 			dev->enabled_ports &= ~BIT(4);
2537 			break;
2538 		default:
2539 /* On the BCM47XX SoCs this is the supported internal switch.*/
2540 #ifndef CONFIG_BCM47XX
2541 			/* BCM5325M */
2542 			return -EINVAL;
2543 #else
2544 			break;
2545 #endif
2546 		}
2547 	} else if (dev->chip_id == BCM53115_DEVICE_ID) {
2548 		u64 strap_value;
2549 
2550 		b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
2551 		/* use second IMP port if GMII is enabled */
2552 		if (strap_value & SV_GMII_CTRL_115)
2553 			dev->cpu_port = 5;
2554 	}
2555 
2556 	/* cpu port is always last */
2557 	dev->num_ports = dev->cpu_port + 1;
2558 	dev->enabled_ports |= BIT(dev->cpu_port);
2559 
2560 	/* Include non standard CPU port built-in PHYs to be probed */
2561 	if (is539x(dev) || is531x5(dev)) {
2562 		for (i = 0; i < dev->num_ports; i++) {
2563 			if (!(dev->ds->phys_mii_mask & BIT(i)) &&
2564 			    !b53_possible_cpu_port(dev->ds, i))
2565 				dev->ds->phys_mii_mask |= BIT(i);
2566 		}
2567 	}
2568 
2569 	dev->ports = devm_kcalloc(dev->dev,
2570 				  dev->num_ports, sizeof(struct b53_port),
2571 				  GFP_KERNEL);
2572 	if (!dev->ports)
2573 		return -ENOMEM;
2574 
2575 	dev->vlans = devm_kcalloc(dev->dev,
2576 				  dev->num_vlans, sizeof(struct b53_vlan),
2577 				  GFP_KERNEL);
2578 	if (!dev->vlans)
2579 		return -ENOMEM;
2580 
2581 	dev->reset_gpio = b53_switch_get_reset_gpio(dev);
2582 	if (dev->reset_gpio >= 0) {
2583 		ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
2584 					    GPIOF_OUT_INIT_HIGH, "robo_reset");
2585 		if (ret)
2586 			return ret;
2587 	}
2588 
2589 	return 0;
2590 }
2591 
2592 struct b53_device *b53_switch_alloc(struct device *base,
2593 				    const struct b53_io_ops *ops,
2594 				    void *priv)
2595 {
2596 	struct dsa_switch *ds;
2597 	struct b53_device *dev;
2598 
2599 	ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
2600 	if (!ds)
2601 		return NULL;
2602 
2603 	ds->dev = base;
2604 	ds->num_ports = DSA_MAX_PORTS;
2605 
2606 	dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
2607 	if (!dev)
2608 		return NULL;
2609 
2610 	ds->priv = dev;
2611 	dev->dev = base;
2612 
2613 	dev->ds = ds;
2614 	dev->priv = priv;
2615 	dev->ops = ops;
2616 	ds->ops = &b53_switch_ops;
2617 	ds->configure_vlan_while_not_filtering = true;
2618 	ds->untag_bridge_pvid = true;
2619 	dev->vlan_enabled = ds->configure_vlan_while_not_filtering;
2620 	mutex_init(&dev->reg_mutex);
2621 	mutex_init(&dev->stats_mutex);
2622 
2623 	return dev;
2624 }
2625 EXPORT_SYMBOL(b53_switch_alloc);
2626 
2627 int b53_switch_detect(struct b53_device *dev)
2628 {
2629 	u32 id32;
2630 	u16 tmp;
2631 	u8 id8;
2632 	int ret;
2633 
2634 	ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
2635 	if (ret)
2636 		return ret;
2637 
2638 	switch (id8) {
2639 	case 0:
2640 		/* BCM5325 and BCM5365 do not have this register so reads
2641 		 * return 0. But the read operation did succeed, so assume this
2642 		 * is one of them.
2643 		 *
2644 		 * Next check if we can write to the 5325's VTA register; for
2645 		 * 5365 it is read only.
2646 		 */
2647 		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
2648 		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
2649 
2650 		if (tmp == 0xf)
2651 			dev->chip_id = BCM5325_DEVICE_ID;
2652 		else
2653 			dev->chip_id = BCM5365_DEVICE_ID;
2654 		break;
2655 	case BCM5389_DEVICE_ID:
2656 	case BCM5395_DEVICE_ID:
2657 	case BCM5397_DEVICE_ID:
2658 	case BCM5398_DEVICE_ID:
2659 		dev->chip_id = id8;
2660 		break;
2661 	default:
2662 		ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
2663 		if (ret)
2664 			return ret;
2665 
2666 		switch (id32) {
2667 		case BCM53115_DEVICE_ID:
2668 		case BCM53125_DEVICE_ID:
2669 		case BCM53128_DEVICE_ID:
2670 		case BCM53010_DEVICE_ID:
2671 		case BCM53011_DEVICE_ID:
2672 		case BCM53012_DEVICE_ID:
2673 		case BCM53018_DEVICE_ID:
2674 		case BCM53019_DEVICE_ID:
2675 			dev->chip_id = id32;
2676 			break;
2677 		default:
2678 			dev_err(dev->dev,
2679 				"unsupported switch detected (BCM53%02x/BCM%x)\n",
2680 				id8, id32);
2681 			return -ENODEV;
2682 		}
2683 	}
2684 
2685 	if (dev->chip_id == BCM5325_DEVICE_ID)
2686 		return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
2687 				 &dev->core_rev);
2688 	else
2689 		return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
2690 				 &dev->core_rev);
2691 }
2692 EXPORT_SYMBOL(b53_switch_detect);
2693 
2694 int b53_switch_register(struct b53_device *dev)
2695 {
2696 	int ret;
2697 
2698 	if (dev->pdata) {
2699 		dev->chip_id = dev->pdata->chip_id;
2700 		dev->enabled_ports = dev->pdata->enabled_ports;
2701 	}
2702 
2703 	if (!dev->chip_id && b53_switch_detect(dev))
2704 		return -EINVAL;
2705 
2706 	ret = b53_switch_init(dev);
2707 	if (ret)
2708 		return ret;
2709 
2710 	dev_info(dev->dev, "found switch: %s, rev %i\n",
2711 		 dev->name, dev->core_rev);
2712 
2713 	return dsa_register_switch(dev->ds);
2714 }
2715 EXPORT_SYMBOL(b53_switch_register);
2716 
2717 MODULE_AUTHOR("Jonas Gorski <[email protected]>");
2718 MODULE_DESCRIPTION("B53 switch library");
2719 MODULE_LICENSE("Dual BSD/GPL");
2720