1menu "CAN USB interfaces" 2 depends on USB 3 4config CAN_8DEV_USB 5 tristate "8 devices USB2CAN interface" 6 ---help--- 7 This driver supports the USB2CAN interface 8 from 8 devices (http://www.8devices.com). 9 10config CAN_EMS_USB 11 tristate "EMS CPC-USB/ARM7 CAN/USB interface" 12 ---help--- 13 This driver is for the one channel CPC-USB/ARM7 CAN/USB interface 14 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). 15 16config CAN_ESD_USB2 17 tristate "ESD USB/2 CAN/USB interface" 18 ---help--- 19 This driver supports the CAN-USB/2 interface 20 from esd electronic system design gmbh (http://www.esd.eu). 21 22config CAN_GS_USB 23 tristate "Geschwister Schneider UG interfaces" 24 ---help--- 25 This driver supports the Geschwister Schneider and bytewerk.org 26 candleLight USB CAN interfaces USB/CAN devices 27 If unsure choose N, 28 choose Y for built in support, 29 M to compile as module (module will be named: gs_usb). 30 31config CAN_KVASER_USB 32 tristate "Kvaser CAN/USB interface" 33 ---help--- 34 This driver adds support for Kvaser CAN/USB devices like Kvaser 35 Leaf Light and Kvaser USBcan II. 36 37 The driver provides support for the following devices: 38 - Kvaser Leaf Light 39 - Kvaser Leaf Professional HS 40 - Kvaser Leaf SemiPro HS 41 - Kvaser Leaf Professional LS 42 - Kvaser Leaf Professional SWC 43 - Kvaser Leaf Professional LIN 44 - Kvaser Leaf SemiPro LS 45 - Kvaser Leaf SemiPro SWC 46 - Kvaser Memorator II HS/HS 47 - Kvaser USBcan Professional HS/HS 48 - Kvaser Leaf Light GI 49 - Kvaser Leaf Professional HS (OBD-II connector) 50 - Kvaser Memorator Professional HS/LS 51 - Kvaser Leaf Light "China" 52 - Kvaser BlackBird SemiPro 53 - Kvaser USBcan R 54 - Kvaser Leaf Light v2 55 - Kvaser Mini PCI Express HS 56 - Kvaser Mini PCI Express 2xHS 57 - Kvaser USBcan Light 2xHS 58 - Kvaser USBcan II HS/HS 59 - Kvaser USBcan II HS/LS 60 - Kvaser USBcan Rugged ("USBcan Rev B") 61 - Kvaser Memorator HS/HS 62 - Kvaser Memorator HS/LS 63 - Scania VCI2 (if you have the Kvaser logo on top) 64 65 If unsure, say N. 66 67 To compile this driver as a module, choose M here: the 68 module will be called kvaser_usb. 69 70config CAN_MCBA_USB 71 tristate "Microchip CAN BUS Analyzer interface" 72 ---help--- 73 This driver supports the CAN BUS Analyzer interface 74 from Microchip (http://www.microchip.com/development-tools/). 75 76config CAN_PEAK_USB 77 tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD" 78 ---help--- 79 This driver supports the PEAK-System Technik USB adapters that enable 80 access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD 81 standards, that is: 82 83 PCAN-USB single CAN 2.0b channel USB adapter 84 PCAN-USB Pro dual CAN 2.0b channels USB adapter 85 PCAN-USB FD single CAN-FD channel USB adapter 86 PCAN-USB Pro FD dual CAN-FD channels USB adapter 87 PCAN-Chip USB CAN-FD to USB stamp module 88 PCAN-USB X6 6 CAN-FD channels USB adapter 89 90 (see also http://www.peak-system.com). 91 92config CAN_MCBA_USB 93 tristate "Microchip CAN BUS Analyzer interface" 94 ---help--- 95 This driver supports the CAN BUS Analyzer interface 96 from Microchip (http://www.microchip.com/development-tools/). 97 98config CAN_UCAN 99 tristate "Theobroma Systems UCAN interface" 100 ---help--- 101 This driver supports the Theobroma Systems 102 UCAN USB-CAN interface. 103 104 The UCAN driver supports the microcontroller-based USB/CAN 105 adapters from Theobroma Systems. There are two form-factors 106 that run essentially the same firmware: 107 108 * Seal: standalone USB stick 109 https://www.theobroma-systems.com/seal) 110 * Mule: integrated on the PCB of various System-on-Modules 111 from Theobroma Systems like the A31-µQ7 and the RK3399-Q7 112 (https://www.theobroma-systems.com/rk3399-q7) 113 114endmenu 115