1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1025 109 tristate "Analog Devices ADM1025 and compatibles" 110 depends on I2C 111 select HWMON_VID 112 help 113 If you say yes here you get support for Analog Devices ADM1025 114 and Philips NE1619 sensor chips. 115 116 This driver can also be built as a module. If so, the module 117 will be called adm1025. 118 119config SENSORS_ADM1026 120 tristate "Analog Devices ADM1026 and compatibles" 121 depends on I2C 122 select HWMON_VID 123 help 124 If you say yes here you get support for Analog Devices ADM1026 125 sensor chip. 126 127 This driver can also be built as a module. If so, the module 128 will be called adm1026. 129 130config SENSORS_ADM1029 131 tristate "Analog Devices ADM1029" 132 depends on I2C 133 help 134 If you say yes here you get support for Analog Devices ADM1029 135 sensor chip. 136 Very rare chip, please let us know you use it. 137 138 This driver can also be built as a module. If so, the module 139 will be called adm1029. 140 141config SENSORS_ADM1031 142 tristate "Analog Devices ADM1031 and compatibles" 143 depends on I2C 144 help 145 If you say yes here you get support for Analog Devices ADM1031 146 and ADM1030 sensor chips. 147 148 This driver can also be built as a module. If so, the module 149 will be called adm1031. 150 151config SENSORS_ADM1177 152 tristate "Analog Devices ADM1177 and compatibles" 153 depends on I2C 154 help 155 If you say yes here you get support for Analog Devices ADM1177 156 sensor chips. 157 158 This driver can also be built as a module. If so, the module 159 will be called adm1177. 160 161config SENSORS_ADM9240 162 tristate "Analog Devices ADM9240 and compatibles" 163 depends on I2C 164 select HWMON_VID 165 select REGMAP_I2C 166 help 167 If you say yes here you get support for Analog Devices ADM9240, 168 Dallas DS1780, National Semiconductor LM81 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm9240. 172 173config SENSORS_ADT7X10 174 tristate 175 select REGMAP 176 help 177 This module contains common code shared by the ADT7310/ADT7320 and 178 ADT7410/ADT7420 temperature monitoring chip drivers. 179 180 If built as a module, the module will be called adt7x10. 181 182config SENSORS_ADT7310 183 tristate "Analog Devices ADT7310/ADT7320" 184 depends on SPI_MASTER 185 select SENSORS_ADT7X10 186 help 187 If you say yes here you get support for the Analog Devices 188 ADT7310 and ADT7320 temperature monitoring chips. 189 190 This driver can also be built as a module. If so, the module 191 will be called adt7310. 192 193config SENSORS_ADT7410 194 tristate "Analog Devices ADT7410/ADT7420" 195 depends on I2C 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7410 and ADT7420 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7410. 203 204config SENSORS_ADT7411 205 tristate "Analog Devices ADT7411" 206 depends on I2C 207 help 208 If you say yes here you get support for the Analog Devices 209 ADT7411 voltage and temperature monitoring chip. 210 211 This driver can also be built as a module. If so, the module 212 will be called adt7411. 213 214config SENSORS_ADT7462 215 tristate "Analog Devices ADT7462" 216 depends on I2C 217 help 218 If you say yes here you get support for the Analog Devices 219 ADT7462 temperature monitoring chips. 220 221 This driver can also be built as a module. If so, the module 222 will be called adt7462. 223 224config SENSORS_ADT7470 225 tristate "Analog Devices ADT7470" 226 depends on I2C 227 select REGMAP_I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7470 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7470. 234 235config SENSORS_ADT7475 236 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 237 depends on I2C 238 select HWMON_VID 239 help 240 If you say yes here you get support for the Analog Devices 241 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 242 chips. 243 244 This driver can also be built as a module. If so, the module 245 will be called adt7475. 246 247config SENSORS_AHT10 248 tristate "Aosong AHT10, AHT20" 249 depends on I2C 250 select CRC8 251 help 252 If you say yes here, you get support for the Aosong AHT10 and AHT20 253 temperature and humidity sensors 254 255 This driver can also be built as a module. If so, the module 256 will be called aht10. 257 258config SENSORS_AQUACOMPUTER_D5NEXT 259 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 260 depends on USB_HID 261 select CRC16 262 help 263 If you say yes here you get support for sensors and fans of 264 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 265 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 266 Next sensor, where available. 267 268 This driver can also be built as a module. If so, the module 269 will be called aquacomputer_d5next. 270 271config SENSORS_AS370 272 tristate "Synaptics AS370 SoC hardware monitoring driver" 273 help 274 If you say yes here you get support for the PVT sensors of 275 the Synaptics AS370 SoC 276 277 This driver can also be built as a module. If so, the module 278 will be called as370-hwmon. 279 280 281config SENSORS_ASC7621 282 tristate "Andigilog aSC7621" 283 depends on I2C 284 help 285 If you say yes here you get support for the aSC7621 286 family of SMBus sensors chip found on most Intel X38, X48, X58, 287 945, 965 and 975 desktop boards. Currently supported chips: 288 aSC7621 289 aSC7621a 290 291 This driver can also be built as a module. If so, the module 292 will be called asc7621. 293 294config SENSORS_ASUS_ROG_RYUJIN 295 tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver" 296 depends on HID 297 help 298 If you say yes here you get support for the fans and sensors of 299 the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler. 300 301 This driver can also be built as a module. If so, the module 302 will be called asus_rog_ryujin. 303 304config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NB 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338config SENSORS_FAM15H_POWER 339 tristate "AMD Family 15h processor power" 340 depends on X86 && PCI && CPU_SUP_AMD 341 help 342 If you say yes here you get support for processor power 343 information of your AMD family 15h CPU. 344 345 This driver can also be built as a module. If so, the module 346 will be called fam15h_power. 347 348config SENSORS_APPLESMC 349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 350 depends on INPUT && X86 351 select NEW_LEDS 352 select LEDS_CLASS 353 help 354 This driver provides support for the Apple System Management 355 Controller, which provides an accelerometer (Apple Sudden Motion 356 Sensor), light sensors, temperature sensors, keyboard backlight 357 control and fan control. 358 359 Only Intel-based Apple's computers are supported (MacBook Pro, 360 MacBook, MacMini). 361 362 Data from the different sensors, keyboard backlight control and fan 363 control are accessible via sysfs. 364 365 This driver also provides an absolute input class device, allowing 366 the laptop to act as a pinball machine-esque joystick. 367 368 Say Y here if you have an applicable laptop and want to experience 369 the awesome power of applesmc. 370 371config SENSORS_ARM_SCMI 372 tristate "ARM SCMI Sensors" 373 depends on ARM_SCMI_PROTOCOL 374 depends on THERMAL || !THERMAL_OF 375 help 376 This driver provides support for temperature, voltage, current 377 and power sensors available on SCMI based platforms. The actual 378 number and type of sensors exported depend on the platform. 379 380 This driver can also be built as a module. If so, the module 381 will be called scmi-hwmon. 382 383config SENSORS_ARM_SCPI 384 tristate "ARM SCPI Sensors" 385 depends on ARM_SCPI_PROTOCOL 386 depends on THERMAL || !THERMAL_OF 387 help 388 This driver provides support for temperature, voltage, current 389 and power sensors available on ARM Ltd's SCP based platforms. The 390 actual number and type of sensors exported depend on the platform. 391 392config SENSORS_ASB100 393 tristate "Asus ASB100 Bach" 394 depends on (X86 || COMPILE_TEST) && I2C 395 select HWMON_VID 396 help 397 If you say yes here you get support for the ASB100 Bach sensor 398 chip found on some Asus mainboards. 399 400 This driver can also be built as a module. If so, the module 401 will be called asb100. 402 403config SENSORS_ASPEED 404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 405 depends on ARCH_ASPEED || COMPILE_TEST 406 depends on THERMAL || THERMAL=n 407 select REGMAP 408 help 409 This driver provides support for ASPEED AST2400/AST2500 PWM 410 and Fan Tacho controllers. 411 412 This driver can also be built as a module. If so, the module 413 will be called aspeed_pwm_tacho. 414 415config SENSORS_ASPEED_G6 416 tristate "ASPEED g6 PWM and Fan tach driver" 417 depends on ARCH_ASPEED || COMPILE_TEST 418 depends on PWM 419 help 420 This driver provides support for ASPEED G6 PWM and Fan Tach 421 controllers. 422 423 This driver can also be built as a module. If so, the module 424 will be called aspeed_pwm_tacho. 425 426config SENSORS_ATXP1 427 tristate "Attansic ATXP1 VID controller" 428 depends on I2C 429 select HWMON_VID 430 help 431 If you say yes here you get support for the Attansic ATXP1 VID 432 controller. 433 434 If your board have such a chip, you are able to control your CPU 435 core and other voltages. 436 437 This driver can also be built as a module. If so, the module 438 will be called atxp1. 439 440config SENSORS_BT1_PVT 441 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 442 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 443 select POLYNOMIAL 444 help 445 If you say yes here you get support for Baikal-T1 PVT sensor 446 embedded into the SoC. 447 448 This driver can also be built as a module. If so, the module will be 449 called bt1-pvt. 450 451config SENSORS_BT1_PVT_ALARMS 452 bool "Enable Baikal-T1 PVT sensor alarms" 453 depends on SENSORS_BT1_PVT 454 help 455 Baikal-T1 PVT IP-block provides threshold registers for each 456 supported sensor. But the corresponding interrupts might be 457 generated by the thresholds comparator only in synchronization with 458 a data conversion. Additionally there is only one sensor data can 459 be converted at a time. All of these makes the interface impossible 460 to be used for the hwmon alarms implementation without periodic 461 switch between the PVT sensors. By default the data conversion is 462 performed on demand from the user-space. If this config is enabled 463 the data conversion will be periodically performed and the data will be 464 saved in the internal driver cache. 465 466config SENSORS_CHIPCAP2 467 tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" 468 depends on I2C 469 help 470 Say yes here to build support for the Amphenol ChipCap 2 471 relative humidity and temperature sensor. 472 473 To compile this driver as a module, choose M here: the module 474 will be called chipcap2. 475 476config SENSORS_CORSAIR_CPRO 477 tristate "Corsair Commander Pro controller" 478 depends on HID 479 help 480 If you say yes here you get support for the Corsair Commander Pro 481 controller. 482 483 This driver can also be built as a module. If so, the module 484 will be called corsair-cpro. 485 486config SENSORS_CORSAIR_PSU 487 tristate "Corsair PSU HID controller" 488 depends on HID 489 help 490 If you say yes here you get support for Corsair PSUs with a HID 491 interface. 492 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 493 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 494 by Corsair. 495 496 This driver can also be built as a module. If so, the module 497 will be called corsair-psu. 498 499config SENSORS_CROS_EC 500 tristate "ChromeOS Embedded Controller sensors" 501 depends on MFD_CROS_EC_DEV 502 default MFD_CROS_EC_DEV 503 help 504 If you say yes here you get support for ChromeOS Embedded Controller 505 sensors. 506 507 This driver can also be built as a module. If so, the module 508 will be called cros_ec_hwmon. 509 510config SENSORS_DRIVETEMP 511 tristate "Hard disk drives with temperature sensors" 512 depends on SCSI && ATA 513 help 514 If you say yes you get support for the temperature sensor on 515 hard disk drives. 516 517 This driver can also be built as a module. If so, the module 518 will be called drivetemp. 519 520config SENSORS_DS620 521 tristate "Dallas Semiconductor DS620" 522 depends on I2C 523 help 524 If you say yes here you get support for Dallas Semiconductor 525 DS620 sensor chip. 526 527 This driver can also be built as a module. If so, the module 528 will be called ds620. 529 530config SENSORS_DS1621 531 tristate "Dallas Semiconductor DS1621 and compatibles" 532 depends on I2C 533 help 534 If you say yes here you get support for Dallas Semiconductor/Maxim 535 Integrated DS1621 sensor chips and compatible models including: 536 537 - Dallas Semiconductor DS1625 538 - Maxim Integrated DS1631 539 - Maxim Integrated DS1721 540 - Maxim Integrated DS1731 541 542 This driver can also be built as a module. If so, the module 543 will be called ds1621. 544 545config SENSORS_DELL_SMM 546 tristate "Dell laptop SMM BIOS hwmon driver" 547 depends on ACPI_WMI 548 depends on X86 549 imply THERMAL 550 help 551 This hwmon driver adds support for reporting temperature of different 552 sensors and controls the fans on Dell laptops via System Management 553 Mode provided by Dell BIOS. 554 555 When option I8K is also enabled this driver provides legacy /proc/i8k 556 userspace interface for i8kutils package. 557 558config I8K 559 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 560 depends on SENSORS_DELL_SMM 561 depends on PROC_FS 562 help 563 This option enables the legacy /proc/i8k userspace interface of the 564 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 565 version, temperatures and allows control of fan speeds of some Dell 566 laptops. Sometimes it also reports power and hotkey status. 567 568 This interface is required to run programs from the i8kutils package. 569 570 Say Y if you intend to run userspace programs that use this interface. 571 Say N otherwise. 572 573config SENSORS_DA9052_ADC 574 tristate "Dialog DA9052/DA9053 ADC" 575 depends on PMIC_DA9052 576 help 577 Say y here to support the ADC found on Dialog Semiconductor 578 DA9052-BC and DA9053-AA/Bx PMICs. 579 580 This driver can also be built as module. If so, the module 581 will be called da9052-hwmon. 582 583config SENSORS_DA9055 584 tristate "Dialog Semiconductor DA9055 ADC" 585 depends on MFD_DA9055 586 help 587 If you say yes here you get support for ADC on the Dialog 588 Semiconductor DA9055 PMIC. 589 590 This driver can also be built as a module. If so, the module 591 will be called da9055-hwmon. 592 593config SENSORS_I5K_AMB 594 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 595 depends on PCI 596 help 597 If you say yes here you get support for FB-DIMM AMB temperature 598 monitoring chips on systems with the Intel 5000 series chipset. 599 600 This driver can also be built as a module. If so, the module 601 will be called i5k_amb. 602 603config SENSORS_SPARX5 604 tristate "Sparx5 SoC temperature sensor" 605 depends on ARCH_SPARX5 || COMPILE_TEST 606 help 607 If you say yes here you get support for temperature monitoring 608 with the Microchip Sparx5 SoC. 609 610 This driver can also be built as a module. If so, the module 611 will be called sparx5-temp. 612 613config SENSORS_F71805F 614 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 615 depends on HAS_IOPORT 616 depends on !PPC 617 help 618 If you say yes here you get support for hardware monitoring 619 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 620 Super-I/O chips. 621 622 This driver can also be built as a module. If so, the module 623 will be called f71805f. 624 625config SENSORS_F71882FG 626 tristate "Fintek F71882FG and compatibles" 627 depends on HAS_IOPORT 628 depends on !PPC 629 help 630 If you say yes here you get support for hardware monitoring 631 features of many Fintek Super-I/O (LPC) chips. The currently 632 supported chips are: 633 F71808E/A 634 F71858FG 635 F71862FG 636 F71863FG 637 F71869F/E/A 638 F71882FG 639 F71883FG 640 F71889FG/ED/A 641 F8000 642 F81801U 643 F81865F 644 645 This driver can also be built as a module. If so, the module 646 will be called f71882fg. 647 648config SENSORS_F75375S 649 tristate "Fintek F75375S/SP, F75373 and F75387" 650 depends on I2C 651 help 652 If you say yes here you get support for hardware monitoring 653 features of the Fintek F75375S/SP, F75373 and F75387 654 655 This driver can also be built as a module. If so, the module 656 will be called f75375s. 657 658config SENSORS_GSC 659 tristate "Gateworks System Controller ADC" 660 depends on MFD_GATEWORKS_GSC 661 help 662 Support for the Gateworks System Controller A/D converters. 663 664 To compile this driver as a module, choose M here: 665 the module will be called gsc-hwmon. 666 667config SENSORS_MC13783_ADC 668 tristate "Freescale MC13783/MC13892 ADC" 669 depends on MFD_MC13XXX 670 help 671 Support for the A/D converter on MC13783 and MC13892 PMIC. 672 673config SENSORS_FSCHMD 674 tristate "Fujitsu Siemens Computers sensor chips" 675 depends on (X86 || COMPILE_TEST) && I2C 676 help 677 If you say yes here you get support for the following Fujitsu 678 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 679 Heimdall, Heracles, Hades and Syleus including support for the 680 integrated watchdog. 681 682 This is a merged driver for FSC sensor chips replacing the fscpos, 683 fscscy and fscher drivers and adding support for several other FSC 684 sensor chips. 685 686 This driver can also be built as a module. If so, the module 687 will be called fschmd. 688 689config SENSORS_FTSTEUTATES 690 tristate "Fujitsu Technology Solutions sensor chip Teutates" 691 depends on I2C && WATCHDOG 692 select WATCHDOG_CORE 693 help 694 If you say yes here you get support for the Fujitsu Technology 695 Solutions (FTS) sensor chip "Teutates" including support for 696 the integrated watchdog. 697 698 This driver can also be built as a module. If so, the module 699 will be called ftsteutates. 700 701config SENSORS_GIGABYTE_WATERFORCE 702 tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" 703 depends on USB_HID 704 help 705 If you say yes here you get support for hardware monitoring for the 706 Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. 707 708 This driver can also be built as a module. If so, the module 709 will be called gigabyte_waterforce. 710 711config SENSORS_GL518SM 712 tristate "Genesys Logic GL518SM" 713 depends on I2C 714 help 715 If you say yes here you get support for Genesys Logic GL518SM 716 sensor chips. 717 718 This driver can also be built as a module. If so, the module 719 will be called gl518sm. 720 721config SENSORS_GL520SM 722 tristate "Genesys Logic GL520SM" 723 depends on I2C 724 select HWMON_VID 725 help 726 If you say yes here you get support for Genesys Logic GL520SM 727 sensor chips. 728 729 This driver can also be built as a module. If so, the module 730 will be called gl520sm. 731 732config SENSORS_G760A 733 tristate "GMT G760A" 734 depends on I2C 735 help 736 If you say yes here you get support for Global Mixed-mode 737 Technology Inc G760A fan speed PWM controller chips. 738 739 This driver can also be built as a module. If so, the module 740 will be called g760a. 741 742config SENSORS_G762 743 tristate "GMT G762 and G763" 744 depends on I2C 745 help 746 If you say yes here you get support for Global Mixed-mode 747 Technology Inc G762 and G763 fan speed PWM controller chips. 748 749 This driver can also be built as a module. If so, the module 750 will be called g762. 751 752config SENSORS_GPIO_FAN 753 tristate "GPIO fan" 754 depends on OF_GPIO 755 depends on GPIOLIB || COMPILE_TEST 756 depends on THERMAL || THERMAL=n 757 help 758 If you say yes here you get support for fans connected to GPIO lines. 759 760 This driver can also be built as a module. If so, the module 761 will be called gpio-fan. 762 763config SENSORS_GXP_FAN_CTRL 764 tristate "HPE GXP fan controller" 765 depends on ARCH_HPE_GXP || COMPILE_TEST 766 help 767 If you say yes here you get support for GXP fan control functionality. 768 769 The GXP controls fan function via the CPLD through the use of PWM 770 registers. This driver reports status and pwm setting of the fans. 771 772config SENSORS_HIH6130 773 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 774 depends on I2C 775 help 776 If you say yes here you get support for Honeywell Humidicon 777 HIH-6130 and HIH-6131 Humidicon humidity sensors. 778 779 This driver can also be built as a module. If so, the module 780 will be called hih6130. 781 782config SENSORS_HS3001 783 tristate "Renesas HS3001 humidity and temperature sensors" 784 depends on I2C 785 help 786 If you say yes here you get support for the Renesas HS3001, 787 to HS3004 humidity and temperature sensors. 788 789 This driver can also be built as a module. If so, the module 790 will be called hs3001. 791 792config SENSORS_IBMAEM 793 tristate "IBM Active Energy Manager temperature/power sensors and control" 794 select IPMI_SI 795 depends on IPMI_HANDLER 796 help 797 If you say yes here you get support for the temperature and 798 power sensors and capping hardware in various IBM System X 799 servers that support Active Energy Manager. This includes 800 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 801 and certain HC10/HS2x/LS2x/QS2x blades. 802 803 This driver can also be built as a module. If so, the module 804 will be called ibmaem. 805 806config SENSORS_IBMPEX 807 tristate "IBM PowerExecutive temperature/power sensors" 808 select IPMI_SI 809 depends on IPMI_HANDLER 810 help 811 If you say yes here you get support for the temperature and 812 power sensors in various IBM System X servers that support 813 PowerExecutive. So far this includes the x3350, x3550, x3650, 814 x3655, and x3755; the x3800, x3850, and x3950 models that have 815 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 816 817 This driver can also be built as a module. If so, the module 818 will be called ibmpex. 819 820config SENSORS_IBMPOWERNV 821 tristate "IBM POWERNV platform sensors" 822 depends on PPC_POWERNV 823 default y 824 help 825 If you say yes here you get support for the temperature/fan/power 826 sensors on your PowerNV platform. 827 828 This driver can also be built as a module. If so, the module 829 will be called ibmpowernv. 830 831config SENSORS_IIO_HWMON 832 tristate "Hwmon driver that uses channels specified via iio maps" 833 depends on IIO 834 help 835 This is a platform driver that in combination with a suitable 836 map allows IIO devices to provide basic hwmon functionality 837 for those channels specified in the map. This map can be provided 838 either via platform data or the device tree bindings. 839 840config SENSORS_I5500 841 tristate "Intel 5500/5520/X58 temperature sensor" 842 depends on X86 && PCI 843 help 844 If you say yes here you get support for the temperature 845 sensor inside the Intel 5500, 5520 and X58 chipsets. 846 847 This driver can also be built as a module. If so, the module 848 will be called i5500_temp. 849 850config SENSORS_CORETEMP 851 tristate "Intel Core/Core2/Atom temperature sensor" 852 depends on X86 853 help 854 If you say yes here you get support for the temperature 855 sensor inside your CPU. Most of the family 6 CPUs 856 are supported. Check Documentation/hwmon/coretemp.rst for details. 857 858config SENSORS_IT87 859 tristate "ITE IT87xx and compatibles" 860 depends on HAS_IOPORT 861 depends on !PPC 862 select HWMON_VID 863 help 864 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 865 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 866 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 867 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 868 clone. 869 870 This driver can also be built as a module. If so, the module 871 will be called it87. 872 873config SENSORS_JC42 874 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 875 depends on I2C 876 select REGMAP_I2C 877 help 878 If you say yes here, you get support for JEDEC JC42.4 compliant 879 temperature sensors, which are used on many DDR3 memory modules for 880 mobile devices and servers. Support will include, but not be limited 881 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 882 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 883 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 884 885 This driver can also be built as a module. If so, the module 886 will be called jc42. 887 888config SENSORS_POWERZ 889 tristate "ChargerLAB POWER-Z USB-C tester" 890 depends on USB 891 help 892 If you say yes here you get support for ChargerLAB POWER-Z series of 893 USB-C charging testers. 894 895 This driver can also be built as a module. If so, the module 896 will be called powerz. 897 898config SENSORS_POWR1220 899 tristate "Lattice POWR1220 Power Monitoring" 900 depends on I2C 901 help 902 If you say yes here you get access to the hardware monitoring 903 functions of the Lattice POWR1220 isp Power Supply Monitoring, 904 Sequencing and Margining Controller. 905 906 This driver can also be built as a module. If so, the module 907 will be called powr1220. 908 909config SENSORS_LAN966X 910 tristate "Microchip LAN966x Hardware Monitoring" 911 depends on SOC_LAN966 || COMPILE_TEST 912 select REGMAP 913 select POLYNOMIAL 914 help 915 If you say yes here you get support for temperature monitoring 916 on the Microchip LAN966x SoC. 917 918 This driver can also be built as a module. If so, the module 919 will be called lan966x-hwmon. 920 921config SENSORS_LENOVO_EC 922 tristate "Sensor reader for Lenovo ThinkStations" 923 depends on X86 924 help 925 If you say yes here you get support for LENOVO 926 EC Sensor data on newer ThinkStation systems 927 928 This driver can also be built as a module. If so, the module 929 will be called lenovo_ec_sensors. 930 931config SENSORS_LINEAGE 932 tristate "Lineage Compact Power Line Power Entry Module" 933 depends on I2C 934 help 935 If you say yes here you get support for the Lineage Compact Power Line 936 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 937 CP2000DC, CP2725, and others. 938 939 This driver can also be built as a module. If so, the module 940 will be called lineage-pem. 941 942config SENSORS_LOCHNAGAR 943 tristate "Lochnagar Hardware Monitor" 944 depends on MFD_LOCHNAGAR 945 help 946 If you say yes here you get support for Lochnagar 2 temperature, 947 voltage and current sensors abilities. 948 949 This driver can also be built as a module. If so, the module 950 will be called lochnagar-hwmon. 951 952config SENSORS_LTC2945 953 tristate "Linear Technology LTC2945" 954 depends on I2C 955 select REGMAP_I2C 956 help 957 If you say yes here you get support for Linear Technology LTC2945 958 I2C System Monitor. 959 960 This driver can also be built as a module. If so, the module will 961 be called ltc2945. 962 963config SENSORS_LTC2947 964 tristate 965 966config SENSORS_LTC2947_I2C 967 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 968 depends on I2C 969 select REGMAP_I2C 970 select SENSORS_LTC2947 971 help 972 If you say yes here you get support for Linear Technology LTC2947 973 I2C High Precision Power and Energy Monitor 974 975 This driver can also be built as a module. If so, the module will 976 be called ltc2947-i2c. 977 978config SENSORS_LTC2947_SPI 979 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 980 depends on SPI_MASTER 981 select REGMAP_SPI 982 select SENSORS_LTC2947 983 help 984 If you say yes here you get support for Linear Technology LTC2947 985 SPI High Precision Power and Energy Monitor 986 987 This driver can also be built as a module. If so, the module will 988 be called ltc2947-spi. 989 990config SENSORS_LTC2990 991 tristate "Linear Technology LTC2990" 992 depends on I2C 993 help 994 If you say yes here you get support for Linear Technology LTC2990 995 I2C System Monitor. The LTC2990 supports a combination of voltage, 996 current and temperature monitoring. 997 998 This driver can also be built as a module. If so, the module will 999 be called ltc2990. 1000 1001config SENSORS_LTC2991 1002 tristate "Analog Devices LTC2991" 1003 depends on I2C 1004 select REGMAP_I2C 1005 help 1006 If you say yes here you get support for Analog Devices LTC2991 1007 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 1008 supports a combination of voltage, current and temperature monitoring. 1009 1010 This driver can also be built as a module. If so, the module will 1011 be called ltc2991. 1012 1013config SENSORS_LTC2992 1014 tristate "Linear Technology LTC2992" 1015 depends on I2C 1016 depends on GPIOLIB 1017 help 1018 If you say yes here you get support for Linear Technology LTC2992 1019 I2C System Monitor. The LTC2992 measures current, voltage, and 1020 power of two supplies. 1021 1022 This driver can also be built as a module. If so, the module will 1023 be called ltc2992. 1024 1025config SENSORS_LTC4151 1026 tristate "Linear Technology LTC4151" 1027 depends on I2C 1028 help 1029 If you say yes here you get support for Linear Technology LTC4151 1030 High Voltage I2C Current and Voltage Monitor interface. 1031 1032 This driver can also be built as a module. If so, the module will 1033 be called ltc4151. 1034 1035config SENSORS_LTC4215 1036 tristate "Linear Technology LTC4215" 1037 depends on I2C 1038 help 1039 If you say yes here you get support for Linear Technology LTC4215 1040 Hot Swap Controller I2C interface. 1041 1042 This driver can also be built as a module. If so, the module will 1043 be called ltc4215. 1044 1045config SENSORS_LTC4222 1046 tristate "Linear Technology LTC4222" 1047 depends on I2C 1048 select REGMAP_I2C 1049 help 1050 If you say yes here you get support for Linear Technology LTC4222 1051 Dual Hot Swap Controller I2C interface. 1052 1053 This driver can also be built as a module. If so, the module will 1054 be called ltc4222. 1055 1056config SENSORS_LTC4245 1057 tristate "Linear Technology LTC4245" 1058 depends on I2C 1059 help 1060 If you say yes here you get support for Linear Technology LTC4245 1061 Multiple Supply Hot Swap Controller I2C interface. 1062 1063 This driver can also be built as a module. If so, the module will 1064 be called ltc4245. 1065 1066config SENSORS_LTC4260 1067 tristate "Linear Technology LTC4260" 1068 depends on I2C 1069 select REGMAP_I2C 1070 help 1071 If you say yes here you get support for Linear Technology LTC4260 1072 Positive Voltage Hot Swap Controller I2C interface. 1073 1074 This driver can also be built as a module. If so, the module will 1075 be called ltc4260. 1076 1077config SENSORS_LTC4261 1078 tristate "Linear Technology LTC4261" 1079 depends on I2C 1080 help 1081 If you say yes here you get support for Linear Technology LTC4261 1082 Negative Voltage Hot Swap Controller I2C interface. 1083 1084 This driver can also be built as a module. If so, the module will 1085 be called ltc4261. 1086 1087config SENSORS_LTC4282 1088 tristate "Analog Devices LTC4282" 1089 depends on I2C 1090 select REGMAP_I2C 1091 help 1092 If you say yes here you get support for Analog Devices LTC4282 1093 High Current Hot Swap Controller I2C interface. 1094 1095 This driver can also be built as a module. If so, the module will 1096 be called ltc4282. 1097 1098config SENSORS_LTQ_CPUTEMP 1099 bool "Lantiq cpu temperature sensor driver" 1100 depends on SOC_XWAY 1101 help 1102 If you say yes here you get support for the temperature 1103 sensor inside your CPU. 1104 1105config SENSORS_MAX1111 1106 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1107 depends on SPI_MASTER 1108 help 1109 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1110 ADC chips. 1111 1112 This driver can also be built as a module. If so, the module 1113 will be called max1111. 1114 1115config SENSORS_MAX127 1116 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1117 depends on I2C 1118 help 1119 Say y here to support Maxim's MAX127 DAS chips. 1120 1121 This driver can also be built as a module. If so, the module 1122 will be called max127. 1123 1124config SENSORS_MAX16065 1125 tristate "Maxim MAX16065 System Manager and compatibles" 1126 depends on I2C 1127 help 1128 If you say yes here you get support for hardware monitoring 1129 capabilities of the following Maxim System Manager chips. 1130 MAX16065 1131 MAX16066 1132 MAX16067 1133 MAX16068 1134 MAX16070 1135 MAX16071 1136 1137 This driver can also be built as a module. If so, the module 1138 will be called max16065. 1139 1140config SENSORS_MAX1619 1141 tristate "Maxim MAX1619 sensor chip" 1142 depends on I2C 1143 help 1144 If you say yes here you get support for MAX1619 sensor chip. 1145 1146 This driver can also be built as a module. If so, the module 1147 will be called max1619. 1148 1149config SENSORS_MAX1668 1150 tristate "Maxim MAX1668 and compatibles" 1151 depends on I2C 1152 help 1153 If you say yes here you get support for MAX1668, MAX1989 and 1154 MAX1805 chips. 1155 1156 This driver can also be built as a module. If so, the module 1157 will be called max1668. 1158 1159config SENSORS_MAX197 1160 tristate "Maxim MAX197 and compatibles" 1161 help 1162 Support for the Maxim MAX197 A/D converter. 1163 Support will include, but not be limited to, MAX197, and MAX199. 1164 1165 This driver can also be built as a module. If so, the module 1166 will be called max197. 1167 1168config SENSORS_MAX31722 1169 tristate "MAX31722 temperature sensor" 1170 depends on SPI 1171 help 1172 Support for the Maxim Integrated MAX31722/MAX31723 digital 1173 thermometers/thermostats operating over an SPI interface. 1174 1175 This driver can also be built as a module. If so, the module 1176 will be called max31722. 1177 1178config SENSORS_MAX31730 1179 tristate "MAX31730 temperature sensor" 1180 depends on I2C 1181 help 1182 Support for the Maxim Integrated MAX31730 3-Channel Remote 1183 Temperature Sensor. 1184 1185 This driver can also be built as a module. If so, the module 1186 will be called max31730. 1187 1188config SENSORS_MAX31760 1189 tristate "MAX31760 fan speed controller" 1190 depends on I2C 1191 select REGMAP_I2C 1192 help 1193 Support for the Analog Devices MAX31760 Precision Fan-Speed 1194 Controller. MAX31760 integrates temperature sensing along with 1195 precision PWM fan control. 1196 1197 This driver can also be built as a module. If so, the module 1198 will be called max31760. 1199 1200config MAX31827 1201 tristate "MAX31827 low-power temperature switch and similar devices" 1202 depends on I2C 1203 select REGMAP_I2C 1204 help 1205 If you say yes here you get support for MAX31827, MAX31828 and 1206 MAX31829 low-power temperature switches and sensors connected with I2C. 1207 1208 This driver can also be built as a module. If so, the module 1209 will be called max31827. 1210 1211config SENSORS_MAX6620 1212 tristate "Maxim MAX6620 fan controller" 1213 depends on I2C 1214 help 1215 If you say yes here you get support for the MAX6620 1216 fan controller. 1217 1218 This driver can also be built as a module. If so, the module 1219 will be called max6620. 1220 1221config SENSORS_MAX6621 1222 tristate "Maxim MAX6621 sensor chip" 1223 depends on I2C 1224 select REGMAP_I2C 1225 help 1226 If you say yes here you get support for MAX6621 sensor chip. 1227 MAX6621 is a PECI-to-I2C translator provides an efficient, 1228 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1229 It allows reading the temperature from the PECI-compliant 1230 host directly from up to four PECI-enabled CPUs. 1231 1232 This driver can also be built as a module. If so, the module 1233 will be called max6621. 1234 1235config SENSORS_MAX6639 1236 tristate "Maxim MAX6639 sensor chip" 1237 depends on I2C 1238 select REGMAP_I2C 1239 help 1240 If you say yes here you get support for the MAX6639 1241 sensor chips. 1242 1243 This driver can also be built as a module. If so, the module 1244 will be called max6639. 1245 1246config SENSORS_MAX6650 1247 tristate "Maxim MAX6650 sensor chip" 1248 depends on I2C 1249 depends on THERMAL || THERMAL=n 1250 help 1251 If you say yes here you get support for the MAX6650 / MAX6651 1252 sensor chips. 1253 1254 This driver can also be built as a module. If so, the module 1255 will be called max6650. 1256 1257config SENSORS_MAX6697 1258 tristate "Maxim MAX6697 and compatibles" 1259 depends on I2C 1260 help 1261 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1262 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1263 temperature sensor chips. 1264 1265 This driver can also be built as a module. If so, the module 1266 will be called max6697. 1267 1268config SENSORS_MAX31790 1269 tristate "Maxim MAX31790 sensor chip" 1270 depends on I2C 1271 help 1272 If you say yes here you get support for 6-Channel PWM-Output 1273 Fan RPM Controller. 1274 1275 This driver can also be built as a module. If so, the module 1276 will be called max31790. 1277 1278config SENSORS_MC34VR500 1279 tristate "NXP MC34VR500 hardware monitoring driver" 1280 depends on I2C 1281 select REGMAP_I2C 1282 help 1283 If you say yes here you get support for the temperature and input 1284 voltage sensors of the NXP MC34VR500. 1285 1286config SENSORS_MCP3021 1287 tristate "Microchip MCP3021 and compatibles" 1288 depends on I2C 1289 help 1290 If you say yes here you get support for MCP3021 and MCP3221. 1291 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1292 with 12-bit resolution. 1293 1294 This driver can also be built as a module. If so, the module 1295 will be called mcp3021. 1296 1297config SENSORS_MLXREG_FAN 1298 tristate "Mellanox FAN driver" 1299 depends on MELLANOX_PLATFORM 1300 imply THERMAL 1301 select REGMAP 1302 help 1303 This option enables support for the FAN control on the Mellanox 1304 Ethernet and InfiniBand switches. The driver can be activated by the 1305 platform device add call. Say Y to enable these. To compile this 1306 driver as a module, choose 'M' here: the module will be called 1307 mlxreg-fan. 1308 1309config SENSORS_TC654 1310 tristate "Microchip TC654/TC655 and compatibles" 1311 depends on I2C 1312 help 1313 If you say yes here you get support for TC654 and TC655. 1314 The TC654 and TC655 are PWM mode fan speed controllers with 1315 FanSense technology for use with brushless DC fans. 1316 1317 This driver can also be built as a module. If so, the module 1318 will be called tc654. 1319 1320config SENSORS_TPS23861 1321 tristate "Texas Instruments TPS23861 PoE PSE" 1322 depends on I2C 1323 select REGMAP_I2C 1324 help 1325 If you say yes here you get support for Texas Instruments 1326 TPS23861 802.3at PoE PSE chips. 1327 1328 This driver can also be built as a module. If so, the module 1329 will be called tps23861. 1330 1331config SENSORS_MENF21BMC_HWMON 1332 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1333 depends on MFD_MENF21BMC 1334 help 1335 Say Y here to include support for the MEN 14F021P00 BMC 1336 hardware monitoring. 1337 1338 This driver can also be built as a module. If so the module 1339 will be called menf21bmc_hwmon. 1340 1341config SENSORS_MR75203 1342 tristate "Moortec Semiconductor MR75203 PVT Controller" 1343 select REGMAP_MMIO 1344 help 1345 If you say yes here you get support for Moortec MR75203 1346 PVT controller. 1347 1348 This driver can also be built as a module. If so, the module 1349 will be called mr75203. 1350 1351config SENSORS_ADCXX 1352 tristate "National Semiconductor ADCxxxSxxx" 1353 depends on SPI_MASTER 1354 help 1355 If you say yes here you get support for the National Semiconductor 1356 ADC<bb><c>S<sss> chip family, where 1357 * bb is the resolution in number of bits (8, 10, 12) 1358 * c is the number of channels (1, 2, 4, 8) 1359 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1360 kSPS and 101 for 1 MSPS) 1361 1362 Examples : ADC081S101, ADC124S501, ... 1363 1364 This driver can also be built as a module. If so, the module 1365 will be called adcxx. 1366 1367config SENSORS_LM63 1368 tristate "National Semiconductor LM63 and compatibles" 1369 depends on I2C 1370 help 1371 If you say yes here you get support for the National 1372 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1373 sensors with integrated fan control. Such chips are found 1374 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1375 others. 1376 1377 This driver can also be built as a module. If so, the module 1378 will be called lm63. 1379 1380config SENSORS_LM70 1381 tristate "National Semiconductor LM70 and compatibles" 1382 depends on SPI_MASTER 1383 help 1384 If you say yes here you get support for the National Semiconductor 1385 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1386 TMP125 digital temperature sensor chips. 1387 1388 This driver can also be built as a module. If so, the module 1389 will be called lm70. 1390 1391config SENSORS_LM73 1392 tristate "National Semiconductor LM73" 1393 depends on I2C 1394 help 1395 If you say yes here you get support for National Semiconductor LM73 1396 sensor chips. 1397 This driver can also be built as a module. If so, the module 1398 will be called lm73. 1399 1400config SENSORS_LM75 1401 tristate "National Semiconductor LM75 and compatibles" 1402 depends on I2C 1403 select REGMAP_I2C 1404 help 1405 If you say yes here you get support for one common type of 1406 temperature sensor chip, with models including: 1407 1408 - Analog Devices ADT75 1409 - Atmel (now Microchip) AT30TS74 1410 - Dallas Semiconductor DS75, DS1775 and DS7505 1411 - Global Mixed-mode Technology (GMT) G751 1412 - Maxim MAX6625 and MAX6626 1413 - Microchip MCP980x 1414 - National Semiconductor LM75, LM75A 1415 - NXP's LM75A 1416 - ST Microelectronics STDS75 1417 - ST Microelectronics STLM75 1418 - TelCom (now Microchip) TCN75 1419 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1420 TMP175, TMP275 1421 1422 This driver supports driver model based binding through board 1423 specific I2C device tables. 1424 1425 It also supports the "legacy" style of driver binding. To use 1426 that with some chips which don't replicate LM75 quirks exactly, 1427 you may need the "force" module parameter. 1428 1429 This driver can also be built as a module. If so, the module 1430 will be called lm75. 1431 1432config SENSORS_LM77 1433 tristate "National Semiconductor LM77" 1434 depends on I2C 1435 help 1436 If you say yes here you get support for National Semiconductor LM77 1437 sensor chips. 1438 1439 This driver can also be built as a module. If so, the module 1440 will be called lm77. 1441 1442config SENSORS_LM78 1443 tristate "National Semiconductor LM78 and compatibles" 1444 depends on I2C 1445 select HWMON_VID 1446 help 1447 If you say yes here you get support for National Semiconductor LM78, 1448 LM78-J and LM79. 1449 1450 This driver can also be built as a module. If so, the module 1451 will be called lm78. 1452 1453config SENSORS_LM80 1454 tristate "National Semiconductor LM80 and LM96080" 1455 depends on I2C 1456 help 1457 If you say yes here you get support for National Semiconductor 1458 LM80 and LM96080 sensor chips. 1459 1460 This driver can also be built as a module. If so, the module 1461 will be called lm80. 1462 1463config SENSORS_LM83 1464 tristate "National Semiconductor LM83 and compatibles" 1465 depends on I2C 1466 select REGMAP 1467 help 1468 If you say yes here you get support for National Semiconductor 1469 LM82 and LM83 sensor chips. 1470 1471 This driver can also be built as a module. If so, the module 1472 will be called lm83. 1473 1474config SENSORS_LM85 1475 tristate "National Semiconductor LM85 and compatibles" 1476 depends on I2C 1477 select HWMON_VID 1478 help 1479 If you say yes here you get support for National Semiconductor LM85 1480 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1481 EMC6D101, EMC6D102, and EMC6D103. 1482 1483 This driver can also be built as a module. If so, the module 1484 will be called lm85. 1485 1486config SENSORS_LM87 1487 tristate "National Semiconductor LM87 and compatibles" 1488 depends on I2C 1489 select HWMON_VID 1490 help 1491 If you say yes here you get support for National Semiconductor LM87 1492 and Analog Devices ADM1024 sensor chips. 1493 1494 This driver can also be built as a module. If so, the module 1495 will be called lm87. 1496 1497config SENSORS_LM90 1498 tristate "National Semiconductor LM90 and compatibles" 1499 depends on I2C 1500 help 1501 If you say yes here you get support for National Semiconductor LM84, 1502 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1503 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1504 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1505 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1506 MAX6696, 1507 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1508 Winbond/Nuvoton W83L771W/G/AWG/ASG, 1509 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1510 sensor chips. 1511 1512 This driver can also be built as a module. If so, the module 1513 will be called lm90. 1514 1515config SENSORS_LM92 1516 tristate "National Semiconductor LM92 and compatibles" 1517 depends on I2C 1518 select REGMAP_I2C 1519 help 1520 If you say yes here you get support for National Semiconductor LM92 1521 and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. 1522 1523 This driver can also be built as a module. If so, the module 1524 will be called lm92. 1525 1526config SENSORS_LM93 1527 tristate "National Semiconductor LM93 and compatibles" 1528 depends on I2C 1529 select HWMON_VID 1530 help 1531 If you say yes here you get support for National Semiconductor LM93, 1532 LM94, and compatible sensor chips. 1533 1534 This driver can also be built as a module. If so, the module 1535 will be called lm93. 1536 1537config SENSORS_LM95234 1538 tristate "National Semiconductor LM95234 and compatibles" 1539 depends on I2C 1540 select REGMAP_I2C 1541 help 1542 If you say yes here you get support for the LM95233 and LM95234 1543 temperature sensor chips. 1544 1545 This driver can also be built as a module. If so, the module 1546 will be called lm95234. 1547 1548config SENSORS_LM95241 1549 tristate "National Semiconductor LM95241 and compatibles" 1550 depends on I2C 1551 help 1552 If you say yes here you get support for LM95231 and LM95241 sensor 1553 chips. 1554 1555 This driver can also be built as a module. If so, the module 1556 will be called lm95241. 1557 1558config SENSORS_LM95245 1559 tristate "National Semiconductor LM95245 and compatibles" 1560 depends on I2C 1561 select REGMAP_I2C 1562 help 1563 If you say yes here you get support for LM95235 and LM95245 1564 temperature sensor chips. 1565 1566 This driver can also be built as a module. If so, the module 1567 will be called lm95245. 1568 1569config SENSORS_PC87360 1570 tristate "National Semiconductor PC87360 family" 1571 depends on HAS_IOPORT 1572 depends on !PPC 1573 select HWMON_VID 1574 help 1575 If you say yes here you get access to the hardware monitoring 1576 functions of the National Semiconductor PC8736x Super-I/O chips. 1577 The PC87360, PC87363 and PC87364 only have fan monitoring and 1578 control. The PC87365 and PC87366 additionally have voltage and 1579 temperature monitoring. 1580 1581 This driver can also be built as a module. If so, the module 1582 will be called pc87360. 1583 1584config SENSORS_PC87427 1585 tristate "National Semiconductor PC87427" 1586 depends on HAS_IOPORT 1587 depends on !PPC 1588 help 1589 If you say yes here you get access to the hardware monitoring 1590 functions of the National Semiconductor PC87427 Super-I/O chip. 1591 The chip has two distinct logical devices, one for fan speed 1592 monitoring and control, and one for voltage and temperature 1593 monitoring. Fan speed monitoring and control are supported, as 1594 well as temperature monitoring. Voltages aren't supported yet. 1595 1596 This driver can also be built as a module. If so, the module 1597 will be called pc87427. 1598 1599config SENSORS_NTC_THERMISTOR 1600 tristate "NTC thermistor support" 1601 depends on IIO 1602 depends on THERMAL || !THERMAL_OF 1603 help 1604 This driver supports NTC thermistors sensor reading and its 1605 interpretation. The driver can also monitor the temperature and 1606 send notifications about the temperature. 1607 1608 Currently, this driver supports 1609 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1610 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1611 B57891S0103 from EPCOS. 1612 1613 This driver can also be built as a module. If so, the module 1614 will be called ntc-thermistor. 1615 1616config SENSORS_NCT6683 1617 tristate "Nuvoton NCT6683D" 1618 depends on HAS_IOPORT 1619 depends on !PPC 1620 help 1621 If you say yes here you get support for the hardware monitoring 1622 functionality of the Nuvoton NCT6683D eSIO chip. 1623 1624 This driver can also be built as a module. If so, the module 1625 will be called nct6683. 1626 1627config SENSORS_NCT6775_CORE 1628 tristate 1629 select REGMAP 1630 help 1631 This module contains common code shared by the platform and 1632 i2c versions of the nct6775 driver; it is not useful on its 1633 own. 1634 1635 If built as a module, the module will be called 1636 nct6775-core. 1637 1638config SENSORS_NCT6775 1639 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1640 depends on HAS_IOPORT 1641 depends on !PPC 1642 depends on ACPI || ACPI=n 1643 select HWMON_VID 1644 select SENSORS_NCT6775_CORE 1645 help 1646 If you say yes here you get support for the hardware monitoring 1647 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1648 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1649 Super-I/O chips. This driver replaces the w83627ehf driver for 1650 NCT6775F and NCT6776F. 1651 1652 This driver can also be built as a module. If so, the module 1653 will be called nct6775. 1654 1655config SENSORS_NCT6775_I2C 1656 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1657 depends on I2C 1658 select REGMAP_I2C 1659 select SENSORS_NCT6775_CORE 1660 help 1661 If you say yes here you get support for the hardware monitoring 1662 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1663 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1664 Super-I/O chips via their I2C interface. 1665 1666 If you're not building a kernel for a BMC, this is probably 1667 not the driver you want (see CONFIG_SENSORS_NCT6775). 1668 1669 This driver can also be built as a module. If so, the module 1670 will be called nct6775-i2c. 1671 1672config SENSORS_NCT7802 1673 tristate "Nuvoton NCT7802Y" 1674 depends on I2C 1675 select REGMAP_I2C 1676 help 1677 If you say yes here you get support for the Nuvoton NCT7802Y 1678 hardware monitoring chip. 1679 1680 This driver can also be built as a module. If so, the module 1681 will be called nct7802. 1682 1683config SENSORS_NCT7904 1684 tristate "Nuvoton NCT7904" 1685 depends on I2C && WATCHDOG 1686 select WATCHDOG_CORE 1687 help 1688 If you say yes here you get support for the Nuvoton NCT7904 1689 hardware monitoring chip, including manual fan speed control 1690 and support for the integrated watchdog. 1691 1692 This driver can also be built as a module. If so, the module 1693 will be called nct7904. 1694 1695config SENSORS_NPCM7XX 1696 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1697 imply THERMAL 1698 help 1699 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1700 and Fan controllers. 1701 1702 This driver can also be built as a module. If so, the module 1703 will be called npcm750-pwm-fan. 1704 1705config SENSORS_NSA320 1706 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1707 depends on GPIOLIB && OF 1708 depends on MACH_KIRKWOOD || COMPILE_TEST 1709 help 1710 If you say yes here you get support for hardware monitoring 1711 for the ZyXEL NSA320 Media Server and other compatible devices 1712 (probably the NSA325 and some NSA310 variants). 1713 1714 The sensor data is taken from a Holtek HT46R065 microcontroller 1715 connected to GPIO lines. 1716 1717 This driver can also be built as a module. If so, the module 1718 will be called nsa320-hwmon. 1719 1720config SENSORS_NZXT_KRAKEN2 1721 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1722 depends on USB_HID 1723 help 1724 If you say yes here you get support for hardware monitoring for the 1725 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1726 1727 This driver can also be built as a module. If so, the module 1728 will be called nzxt-kraken2. 1729 1730config SENSORS_NZXT_KRAKEN3 1731 tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" 1732 depends on USB_HID 1733 help 1734 If you say yes here you get support for hardware monitoring for the 1735 NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. 1736 1737 This driver can also be built as a module. If so, the module 1738 will be called nzxt-kraken3. 1739 1740config SENSORS_NZXT_SMART2 1741 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1742 depends on USB_HID 1743 help 1744 If you say yes here you get support for hardware monitoring for the 1745 NZXT RGB & Fan Controller/Smart Device v2. 1746 1747 This driver can also be built as a module. If so, the module 1748 will be called nzxt-smart2. 1749 1750source "drivers/hwmon/occ/Kconfig" 1751 1752config SENSORS_OXP 1753 tristate "OneXPlayer EC fan control" 1754 depends on ACPI 1755 depends on X86 1756 help 1757 If you say yes here you get support for fan readings and control over 1758 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant 1759 boards are supported. 1760 1761 Can also be built as a module. In that case it will be called oxp-sensors. 1762 1763config SENSORS_PCF8591 1764 tristate "Philips PCF8591 ADC/DAC" 1765 depends on I2C 1766 help 1767 If you say yes here you get support for Philips PCF8591 4-channel 1768 ADC, 1-channel DAC chips. 1769 1770 This driver can also be built as a module. If so, the module 1771 will be called pcf8591. 1772 1773 These devices are hard to detect and rarely found on mainstream 1774 hardware. If unsure, say N. 1775 1776source "drivers/hwmon/peci/Kconfig" 1777 1778source "drivers/hwmon/pmbus/Kconfig" 1779 1780config SENSORS_PT5161L 1781 tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" 1782 depends on I2C 1783 help 1784 If you say yes here you get support for temperature monitoring 1785 on the Astera Labs PT5161L PCIe retimer. 1786 1787 This driver can also be built as a module. If so, the module 1788 will be called pt5161l. 1789 1790config SENSORS_PWM_FAN 1791 tristate "PWM fan" 1792 depends on PWM || COMPILE_TEST 1793 depends on THERMAL || THERMAL=n 1794 help 1795 If you say yes here you get support for fans connected to PWM lines. 1796 The driver uses the generic PWM interface, thus it will work on a 1797 variety of SoCs. 1798 1799 This driver can also be built as a module. If so, the module 1800 will be called pwm-fan. 1801 1802config SENSORS_RASPBERRYPI_HWMON 1803 tristate "Raspberry Pi voltage monitor" 1804 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1805 help 1806 If you say yes here you get support for voltage sensor on the 1807 Raspberry Pi. 1808 1809 This driver can also be built as a module. If so, the module 1810 will be called raspberrypi-hwmon. 1811 1812config SENSORS_SL28CPLD 1813 tristate "Kontron sl28cpld hardware monitoring driver" 1814 depends on MFD_SL28CPLD || COMPILE_TEST 1815 help 1816 If you say yes here you get support for the fan supervisor of the 1817 sl28cpld board management controller. 1818 1819 This driver can also be built as a module. If so, the module 1820 will be called sl28cpld-hwmon. 1821 1822config SENSORS_SBTSI 1823 tristate "Emulated SB-TSI temperature sensor" 1824 depends on I2C 1825 help 1826 If you say yes here you get support for emulated temperature 1827 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1828 1829 This driver can also be built as a module. If so, the module will 1830 be called sbtsi_temp. 1831 1832config SENSORS_SBRMI 1833 tristate "Emulated SB-RMI sensor" 1834 depends on I2C 1835 help 1836 If you say yes here you get support for emulated RMI 1837 sensors on AMD SoCs with APML interface connected to a BMC device. 1838 1839 This driver can also be built as a module. If so, the module will 1840 be called sbrmi. 1841 1842config SENSORS_SHT15 1843 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1844 depends on GPIOLIB || COMPILE_TEST 1845 select BITREVERSE 1846 help 1847 If you say yes here you get support for the Sensiron SHT10, SHT11, 1848 SHT15, SHT71, SHT75 humidity and temperature sensors. 1849 1850 This driver can also be built as a module. If so, the module 1851 will be called sht15. 1852 1853config SENSORS_SHT21 1854 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1855 depends on I2C 1856 help 1857 If you say yes here you get support for the Sensiron SHT21, SHT25 1858 humidity and temperature sensors. 1859 1860 This driver can also be built as a module. If so, the module 1861 will be called sht21. 1862 1863config SENSORS_SHT3x 1864 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1865 depends on I2C 1866 select CRC8 1867 help 1868 If you say yes here you get support for the Sensiron SHT30 and SHT31 1869 humidity and temperature sensors. 1870 1871 This driver can also be built as a module. If so, the module 1872 will be called sht3x. 1873 1874config SENSORS_SHT4x 1875 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1876 depends on I2C 1877 select CRC8 1878 help 1879 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1880 SHT45 humidity and temperature sensors. 1881 1882 This driver can also be built as a module. If so, the module 1883 will be called sht4x. 1884 1885config SENSORS_SHTC1 1886 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1887 depends on I2C 1888 help 1889 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1890 and SHTC3 humidity and temperature sensors. 1891 1892 This driver can also be built as a module. If so, the module 1893 will be called shtc1. 1894 1895config SENSORS_SIS5595 1896 tristate "Silicon Integrated Systems Corp. SiS5595" 1897 depends on PCI && HAS_IOPORT 1898 help 1899 If you say yes here you get support for the integrated sensors in 1900 SiS5595 South Bridges. 1901 1902 This driver can also be built as a module. If so, the module 1903 will be called sis5595. 1904 1905config SENSORS_SY7636A 1906 tristate "Silergy SY7636A" 1907 depends on MFD_SY7636A 1908 help 1909 If you say yes here you get support for the thermistor readout of 1910 the Silergy SY7636A PMIC. 1911 1912 This driver can also be built as a module. If so, the module 1913 will be called sy7636a-hwmon. 1914 1915config SENSORS_DME1737 1916 tristate "SMSC DME1737, SCH311x and compatibles" 1917 depends on HAS_IOPORT 1918 depends on I2C && !PPC 1919 select HWMON_VID 1920 help 1921 If you say yes here you get support for the hardware monitoring 1922 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1923 Asus A8000 Super-I/O chips. 1924 1925 This driver can also be built as a module. If so, the module 1926 will be called dme1737. 1927 1928config SENSORS_EMC1403 1929 tristate "SMSC EMC1403/23 thermal sensor" 1930 depends on I2C 1931 select REGMAP_I2C 1932 help 1933 If you say yes here you get support for the SMSC EMC1403/23 1934 temperature monitoring chip. 1935 1936 Threshold values can be configured using sysfs. 1937 Data from the different diodes are accessible via sysfs. 1938 1939config SENSORS_EMC2103 1940 tristate "SMSC EMC2103" 1941 depends on I2C 1942 help 1943 If you say yes here you get support for the temperature 1944 and fan sensors of the SMSC EMC2103 chips. 1945 1946 This driver can also be built as a module. If so, the module 1947 will be called emc2103. 1948 1949config SENSORS_EMC2305 1950 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 1951 depends on I2C 1952 imply THERMAL 1953 help 1954 If you say yes here you get support for the Microchip EMC2305 1955 fan controller chips. 1956 The Microchip EMC2305 is a fan controller for up to 5 fans. 1957 Fan rotation speeds are reported in RPM. 1958 1959 This driver can also be built as a module. If so, the module 1960 will be called emc2305. 1961 1962config SENSORS_EMC6W201 1963 tristate "SMSC EMC6W201" 1964 depends on I2C 1965 help 1966 If you say yes here you get support for the SMSC EMC6W201 1967 hardware monitoring chip. 1968 1969 This driver can also be built as a module. If so, the module 1970 will be called emc6w201. 1971 1972config SENSORS_SMSC47M1 1973 tristate "SMSC LPC47M10x and compatibles" 1974 depends on HAS_IOPORT 1975 depends on !PPC 1976 help 1977 If you say yes here you get support for the integrated fan 1978 monitoring and control capabilities of the SMSC LPC47B27x, 1979 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 1980 LPC47M192, LPC47M292 and LPC47M997 chips. 1981 1982 The temperature and voltage sensor features of the LPC47M15x, 1983 LPC47M192, LPC47M292 and LPC47M997 are supported by another 1984 driver, select also "SMSC LPC47M192 and compatibles" below for 1985 those. 1986 1987 This driver can also be built as a module. If so, the module 1988 will be called smsc47m1. 1989 1990config SENSORS_SMSC47M192 1991 tristate "SMSC LPC47M192 and compatibles" 1992 depends on I2C 1993 select HWMON_VID 1994 help 1995 If you say yes here you get support for the temperature and 1996 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 1997 and LPC47M997 chips. 1998 1999 The fan monitoring and control capabilities of these chips 2000 are supported by another driver, select 2001 "SMSC LPC47M10x and compatibles" above. You need both drivers 2002 if you want fan control and voltage/temperature sensor support. 2003 2004 This driver can also be built as a module. If so, the module 2005 will be called smsc47m192. 2006 2007config SENSORS_SMSC47B397 2008 tristate "SMSC LPC47B397-NC" 2009 depends on HAS_IOPORT 2010 depends on !PPC 2011 help 2012 If you say yes here you get support for the SMSC LPC47B397-NC 2013 sensor chip. 2014 2015 This driver can also be built as a module. If so, the module 2016 will be called smsc47b397. 2017 2018config SENSORS_SCH56XX_COMMON 2019 tristate 2020 select REGMAP 2021 2022config SENSORS_SCH5627 2023 tristate "SMSC SCH5627" 2024 depends on HAS_IOPORT 2025 depends on !PPC && WATCHDOG 2026 select SENSORS_SCH56XX_COMMON 2027 select WATCHDOG_CORE 2028 help 2029 If you say yes here you get support for the hardware monitoring 2030 features of the SMSC SCH5627 Super-I/O chip including support for 2031 the integrated watchdog. 2032 2033 This driver can also be built as a module. If so, the module 2034 will be called sch5627. 2035 2036config SENSORS_SCH5636 2037 tristate "SMSC SCH5636" 2038 depends on HAS_IOPORT 2039 depends on !PPC && WATCHDOG 2040 select SENSORS_SCH56XX_COMMON 2041 select WATCHDOG_CORE 2042 help 2043 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 2044 hardware monitoring solutions, allowing motherboard manufacturers to 2045 create their own custom hwmon solution based upon the SCH5636. 2046 2047 Currently this driver only supports the Fujitsu Theseus SCH5636 based 2048 hwmon solution. Say yes here if you want support for the Fujitsu 2049 Theseus' hardware monitoring features including support for the 2050 integrated watchdog. 2051 2052 This driver can also be built as a module. If so, the module 2053 will be called sch5636. 2054 2055config SENSORS_STTS751 2056 tristate "ST Microelectronics STTS751" 2057 depends on I2C 2058 help 2059 If you say yes here you get support for STTS751 2060 temperature sensor chips. 2061 2062 This driver can also be built as a module. If so, the module 2063 will be called stts751. 2064 2065config SENSORS_SFCTEMP 2066 tristate "Starfive JH71x0 temperature sensor" 2067 depends on ARCH_STARFIVE || COMPILE_TEST 2068 help 2069 If you say yes here you get support for temperature sensor 2070 on the Starfive JH71x0 SoCs. 2071 2072 This driver can also be built as a module. If so, the module 2073 will be called sfctemp. 2074 2075config SENSORS_SG2042_MCU 2076 tristate "Sophgo onboard MCU support" 2077 depends on I2C 2078 depends on ARCH_SOPHGO || COMPILE_TEST 2079 help 2080 Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides 2081 power control and some basic information. 2082 2083 This driver can be built as a module. If so, the module 2084 will be called sg2042-mcu. 2085 2086config SENSORS_SURFACE_FAN 2087 tristate "Surface Fan Driver" 2088 depends on SURFACE_AGGREGATOR 2089 depends on SURFACE_AGGREGATOR_BUS 2090 help 2091 Driver that provides monitoring of the fan on Surface Pro devices that 2092 have a fan, like the Surface Pro 9. 2093 2094 This makes the fan's current speed accessible through the hwmon 2095 system. It does not provide control over the fan, the firmware is 2096 responsible for that, this driver merely provides monitoring. 2097 2098 Select M or Y here, if you want to be able to read the fan's speed. 2099 2100config SENSORS_SURFACE_TEMP 2101 tristate "Microsoft Surface Thermal Sensor Driver" 2102 depends on SURFACE_AGGREGATOR 2103 depends on SURFACE_AGGREGATOR_BUS 2104 help 2105 Driver for monitoring thermal sensors connected via the Surface 2106 Aggregator Module (embedded controller) on Microsoft Surface devices. 2107 2108 This driver can also be built as a module. If so, the module 2109 will be called surface_temp. 2110 2111config SENSORS_ADC128D818 2112 tristate "Texas Instruments ADC128D818" 2113 depends on I2C 2114 help 2115 If you say yes here you get support for the Texas Instruments 2116 ADC128D818 System Monitor with Temperature Sensor chip. 2117 2118 This driver can also be built as a module. If so, the module 2119 will be called adc128d818. 2120 2121config SENSORS_ADS7828 2122 tristate "Texas Instruments ADS7828 and compatibles" 2123 depends on I2C 2124 select REGMAP_I2C 2125 help 2126 If you say yes here you get support for Texas Instruments ADS7828 and 2127 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 2128 it is 8-bit on ADS7830. 2129 2130 This driver can also be built as a module. If so, the module 2131 will be called ads7828. 2132 2133config SENSORS_ADS7871 2134 tristate "Texas Instruments ADS7871 A/D converter" 2135 depends on SPI 2136 help 2137 If you say yes here you get support for TI ADS7871 & ADS7870 2138 2139 This driver can also be built as a module. If so, the module 2140 will be called ads7871. 2141 2142config SENSORS_AMC6821 2143 tristate "Texas Instruments AMC6821" 2144 depends on I2C 2145 select REGMAP_I2C 2146 help 2147 If you say yes here you get support for the Texas Instruments 2148 AMC6821 hardware monitoring chips. 2149 2150 This driver can also be built as a module. If so, the module 2151 will be called amc6821. 2152 2153config SENSORS_INA209 2154 tristate "TI / Burr Brown INA209" 2155 depends on I2C 2156 help 2157 If you say yes here you get support for the TI / Burr Brown INA209 2158 voltage / current / power monitor I2C interface. 2159 2160 This driver can also be built as a module. If so, the module will 2161 be called ina209. 2162 2163config SENSORS_INA2XX 2164 tristate "Texas Instruments INA219 and compatibles" 2165 depends on I2C 2166 select REGMAP_I2C 2167 help 2168 If you say yes here you get support for INA219, INA220, INA226, 2169 INA230, and INA231 power monitor chips. 2170 2171 The INA2xx driver is configured for the default configuration of 2172 the part as described in the datasheet. 2173 Default value for Rshunt is 10 mOhms. 2174 This driver can also be built as a module. If so, the module 2175 will be called ina2xx. 2176 2177config SENSORS_INA238 2178 tristate "Texas Instruments INA238" 2179 depends on I2C 2180 select REGMAP_I2C 2181 help 2182 If you say yes here you get support for the INA238 power monitor 2183 chip. This driver supports voltage, current, power and temperature 2184 measurements as well as alarm configuration. 2185 2186 This driver can also be built as a module. If so, the module 2187 will be called ina238. 2188 2189config SENSORS_INA3221 2190 tristate "Texas Instruments INA3221 Triple Power Monitor" 2191 depends on I2C 2192 select REGMAP_I2C 2193 help 2194 If you say yes here you get support for the TI INA3221 Triple Power 2195 Monitor. 2196 2197 This driver can also be built as a module. If so, the module 2198 will be called ina3221. 2199 2200config SENSORS_SPD5118 2201 tristate "SPD5118 Compliant Temperature Sensors" 2202 depends on I2C 2203 select REGMAP_I2C 2204 help 2205 If you say yes here you get support for SPD5118 (JEDEC JESD300) 2206 compliant temperature sensors. Such sensors are found on DDR5 memory 2207 modules. 2208 2209 This driver can also be built as a module. If so, the module 2210 will be called spd5118. 2211 2212config SENSORS_SPD5118_DETECT 2213 bool "Enable detect function" 2214 depends on SENSORS_SPD5118 2215 default (!DMI || !X86) 2216 help 2217 If enabled, the driver auto-detects if a chip in the SPD address 2218 range is compliant to the SPD51888 standard and auto-instantiates 2219 if that is the case. If disabled, SPD5118 compliant devices have 2220 to be instantiated by other means. On X86 systems with DMI support 2221 this will typically be done from DMI DDR detection code in the 2222 I2C SMBus subsystem. Devicetree based systems will instantiate 2223 attached devices if the DIMMs are listed in the devicetree file. 2224 2225 Disabling the detect function will speed up boot time and reduce 2226 the risk of mis-detecting SPD5118 compliant devices. However, it 2227 may result in missed DIMMs under some circumstances. 2228 2229 If unsure, say Y. 2230 2231config SENSORS_TC74 2232 tristate "Microchip TC74" 2233 depends on I2C 2234 help 2235 If you say yes here you get support for Microchip TC74 single 2236 input temperature sensor chips. 2237 2238 This driver can also be built as a module. If so, the module 2239 will be called tc74. 2240 2241config SENSORS_THMC50 2242 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2243 depends on I2C 2244 help 2245 If you say yes here you get support for Texas Instruments THMC50 2246 sensor chips and clones: the Analog Devices ADM1022. 2247 2248 This driver can also be built as a module. If so, the module 2249 will be called thmc50. 2250 2251config SENSORS_TMP102 2252 tristate "Texas Instruments TMP102" 2253 depends on I2C 2254 select REGMAP_I2C 2255 help 2256 If you say yes here you get support for Texas Instruments TMP102 2257 sensor chips. 2258 2259 This driver can also be built as a module. If so, the module 2260 will be called tmp102. 2261 2262config SENSORS_TMP103 2263 tristate "Texas Instruments TMP103" 2264 depends on I2C 2265 select REGMAP_I2C 2266 help 2267 If you say yes here you get support for Texas Instruments TMP103 2268 sensor chips. 2269 2270 This driver can also be built as a module. If so, the module 2271 will be called tmp103. 2272 2273config SENSORS_TMP108 2274 tristate "Texas Instruments TMP108" 2275 depends on I2C 2276 select REGMAP_I2C 2277 help 2278 If you say yes here you get support for Texas Instruments TMP108 2279 sensor chips. 2280 2281 This driver can also be built as a module. If so, the module 2282 will be called tmp108. 2283 2284config SENSORS_TMP401 2285 tristate "Texas Instruments TMP401 and compatibles" 2286 depends on I2C 2287 select REGMAP 2288 help 2289 If you say yes here you get support for Texas Instruments TMP401, 2290 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2291 2292 This driver can also be built as a module. If so, the module 2293 will be called tmp401. 2294 2295config SENSORS_TMP421 2296 tristate "Texas Instruments TMP421 and compatible" 2297 depends on I2C 2298 help 2299 If you say yes here you get support for Texas Instruments TMP421, 2300 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2301 2302 This driver can also be built as a module. If so, the module 2303 will be called tmp421. 2304 2305config SENSORS_TMP464 2306 tristate "Texas Instruments TMP464 and compatible" 2307 depends on I2C 2308 select REGMAP_I2C 2309 help 2310 If you say yes here you get support for Texas Instruments TMP464 2311 and TMP468 temperature sensor chips. 2312 2313 This driver can also be built as a module. If so, the module 2314 will be called tmp464. 2315 2316config SENSORS_TMP513 2317 tristate "Texas Instruments TMP513 and compatibles" 2318 depends on I2C 2319 select REGMAP_I2C 2320 help 2321 If you say yes here you get support for Texas Instruments TMP512, 2322 and TMP513 temperature and power supply sensor chips. 2323 2324 This driver can also be built as a module. If so, the module 2325 will be called tmp513. 2326 2327config SENSORS_VEXPRESS 2328 tristate "Versatile Express" 2329 depends on VEXPRESS_CONFIG 2330 help 2331 This driver provides support for hardware sensors available on 2332 the ARM Ltd's Versatile Express platform. It can provide wide 2333 range of information like temperature, power, energy. 2334 2335config SENSORS_VIA_CPUTEMP 2336 tristate "VIA CPU temperature sensor" 2337 depends on X86 2338 select HWMON_VID 2339 help 2340 If you say yes here you get support for the temperature 2341 sensor inside your CPU. Supported are all known variants of 2342 the VIA C7 and Nano. 2343 2344config SENSORS_VIA686A 2345 tristate "VIA686A" 2346 depends on PCI && HAS_IOPORT 2347 help 2348 If you say yes here you get support for the integrated sensors in 2349 Via 686A/B South Bridges. 2350 2351 This driver can also be built as a module. If so, the module 2352 will be called via686a. 2353 2354config SENSORS_VT1211 2355 tristate "VIA VT1211" 2356 depends on HAS_IOPORT 2357 depends on !PPC 2358 select HWMON_VID 2359 help 2360 If you say yes here then you get support for hardware monitoring 2361 features of the VIA VT1211 Super-I/O chip. 2362 2363 This driver can also be built as a module. If so, the module 2364 will be called vt1211. 2365 2366config SENSORS_VT8231 2367 tristate "VIA VT8231" 2368 depends on PCI && HAS_IOPORT 2369 select HWMON_VID 2370 help 2371 If you say yes here then you get support for the integrated sensors 2372 in the VIA VT8231 device. 2373 2374 This driver can also be built as a module. If so, the module 2375 will be called vt8231. 2376 2377config SENSORS_W83773G 2378 tristate "Nuvoton W83773G" 2379 depends on I2C 2380 select REGMAP_I2C 2381 help 2382 If you say yes here you get support for the Nuvoton W83773G hardware 2383 monitoring chip. 2384 2385 This driver can also be built as a module. If so, the module 2386 will be called w83773g. 2387 2388config SENSORS_W83781D 2389 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2390 depends on I2C 2391 select HWMON_VID 2392 help 2393 If you say yes here you get support for the Winbond W8378x series 2394 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2395 Asus AS99127F. 2396 2397 This driver can also be built as a module. If so, the module 2398 will be called w83781d. 2399 2400config SENSORS_W83791D 2401 tristate "Winbond W83791D" 2402 depends on I2C 2403 select HWMON_VID 2404 help 2405 If you say yes here you get support for the Winbond W83791D chip. 2406 2407 This driver can also be built as a module. If so, the module 2408 will be called w83791d. 2409 2410config SENSORS_W83792D 2411 tristate "Winbond W83792D" 2412 depends on I2C 2413 help 2414 If you say yes here you get support for the Winbond W83792D chip. 2415 2416 This driver can also be built as a module. If so, the module 2417 will be called w83792d. 2418 2419config SENSORS_W83793 2420 tristate "Winbond W83793" 2421 depends on I2C 2422 select HWMON_VID 2423 help 2424 If you say yes here you get support for the Winbond W83793 2425 hardware monitoring chip, including support for the integrated 2426 watchdog. 2427 2428 This driver can also be built as a module. If so, the module 2429 will be called w83793. 2430 2431config SENSORS_W83795 2432 tristate "Winbond/Nuvoton W83795G/ADG" 2433 depends on I2C 2434 help 2435 If you say yes here you get support for the Winbond W83795G and 2436 W83795ADG hardware monitoring chip, including manual fan speed 2437 control. 2438 2439 This driver can also be built as a module. If so, the module 2440 will be called w83795. 2441 2442config SENSORS_W83795_FANCTRL 2443 bool "Include automatic fan control support" 2444 depends on SENSORS_W83795 2445 help 2446 If you say yes here, support for automatic fan speed control 2447 will be included in the driver. 2448 2449 Please also note that this option will create sysfs attribute 2450 files which may change in the future, so you shouldn't rely 2451 on them being stable. 2452 2453config SENSORS_W83L785TS 2454 tristate "Winbond W83L785TS-S" 2455 depends on I2C 2456 help 2457 If you say yes here you get support for the Winbond W83L785TS-S 2458 sensor chip, which is used on the Asus A7N8X, among other 2459 motherboards. 2460 2461 This driver can also be built as a module. If so, the module 2462 will be called w83l785ts. 2463 2464config SENSORS_W83L786NG 2465 tristate "Winbond W83L786NG, W83L786NR" 2466 depends on I2C 2467 help 2468 If you say yes here you get support for the Winbond W83L786NG 2469 and W83L786NR sensor chips. 2470 2471 This driver can also be built as a module. If so, the module 2472 will be called w83l786ng. 2473 2474config SENSORS_W83627HF 2475 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2476 depends on HAS_IOPORT 2477 depends on !PPC 2478 select HWMON_VID 2479 help 2480 If you say yes here you get support for the Winbond W836X7 series 2481 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2482 W83697HF. 2483 2484 This driver can also be built as a module. If so, the module 2485 will be called w83627hf. 2486 2487config SENSORS_W83627EHF 2488 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2489 depends on HAS_IOPORT 2490 depends on !PPC 2491 select HWMON_VID 2492 help 2493 If you say yes here you get support for the hardware 2494 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2495 2496 This driver also supports the W83627EHG, which is the lead-free 2497 version of the W83627EHF, and the W83627DHG, which is a similar 2498 chip suited for specific Intel processors that use PECI such as 2499 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2500 version of the W83627DHG (as far as hardware monitoring goes.) 2501 2502 This driver also supports Nuvoton W83667HG and W83667HG-B. 2503 2504 This driver can also be built as a module. If so, the module 2505 will be called w83627ehf. 2506 2507config SENSORS_WM831X 2508 tristate "WM831x PMICs" 2509 depends on MFD_WM831X 2510 help 2511 If you say yes here you get support for the hardware 2512 monitoring functionality of the Wolfson Microelectronics 2513 WM831x series of PMICs. 2514 2515 This driver can also be built as a module. If so, the module 2516 will be called wm831x-hwmon. 2517 2518config SENSORS_WM8350 2519 tristate "Wolfson Microelectronics WM835x" 2520 depends on MFD_WM8350 2521 help 2522 If you say yes here you get support for the hardware 2523 monitoring features of the WM835x series of PMICs. 2524 2525 This driver can also be built as a module. If so, the module 2526 will be called wm8350-hwmon. 2527 2528config SENSORS_ULTRA45 2529 tristate "Sun Ultra45 PIC16F747" 2530 depends on SPARC64 2531 help 2532 This driver provides support for the Ultra45 workstation environmental 2533 sensors. 2534 2535config SENSORS_XGENE 2536 tristate "APM X-Gene SoC hardware monitoring driver" 2537 depends on XGENE_SLIMPRO_MBOX || PCC 2538 help 2539 If you say yes here you get support for the temperature 2540 and power sensors for APM X-Gene SoC. 2541 2542config SENSORS_INTEL_M10_BMC_HWMON 2543 tristate "Intel MAX10 BMC Hardware Monitoring" 2544 depends on MFD_INTEL_M10_BMC_CORE 2545 help 2546 This driver provides support for the hardware monitoring functionality 2547 on Intel MAX10 BMC chip. 2548 2549 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2550 sensors monitor various telemetry data of different components on the 2551 card, e.g. board temperature, FPGA core temperature/voltage/current. 2552 2553if ACPI 2554 2555comment "ACPI drivers" 2556 2557config SENSORS_ACPI_POWER 2558 tristate "ACPI 4.0 power meter" 2559 help 2560 This driver exposes ACPI 4.0 power meters as hardware monitoring 2561 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2562 and a power meter. 2563 2564 To compile this driver as a module, choose M here: 2565 the module will be called acpi_power_meter. 2566 2567config SENSORS_ATK0110 2568 tristate "ASUS ATK0110" 2569 depends on X86 2570 help 2571 If you say yes here you get support for the ACPI hardware 2572 monitoring interface found in many ASUS motherboards. This 2573 driver will provide readings of fans, voltages and temperatures 2574 through the system firmware. 2575 2576 This driver can also be built as a module. If so, the module 2577 will be called asus_atk0110. 2578 2579config SENSORS_ASUS_WMI 2580 tristate "ASUS WMI X370/X470/B450/X399" 2581 depends on ACPI_WMI 2582 help 2583 If you say yes here you get support for the ACPI hardware monitoring 2584 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2585 will provide readings of fans, voltages and temperatures through the system 2586 firmware. 2587 2588 This driver can also be built as a module. If so, the module 2589 will be called asus_wmi_sensors. 2590 2591config SENSORS_ASUS_EC 2592 tristate "ASUS EC Sensors" 2593 depends on X86 2594 help 2595 If you say yes here you get support for the ACPI embedded controller 2596 hardware monitoring interface found in ASUS motherboards. The driver 2597 currently supports B550/X570 boards, although other ASUS boards might 2598 provide this monitoring interface as well. 2599 2600 This driver can also be built as a module. If so, the module 2601 will be called asus_ec_sensors. 2602 2603config SENSORS_HP_WMI 2604 tristate "HP WMI Sensors" 2605 depends on ACPI_WMI 2606 help 2607 If you say yes here you get support for the ACPI hardware monitoring 2608 interface found in HP (and some HP Compaq) business-class computers. 2609 Available sensors vary between systems. Temperature and fan speed 2610 sensors are the most common. 2611 2612 This driver can also be built as a module. If so, the module 2613 will be called hp_wmi_sensors. 2614 2615endif # ACPI 2616 2617endif # HWMON 2618