1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1025 109 tristate "Analog Devices ADM1025 and compatibles" 110 depends on I2C 111 select HWMON_VID 112 help 113 If you say yes here you get support for Analog Devices ADM1025 114 and Philips NE1619 sensor chips. 115 116 This driver can also be built as a module. If so, the module 117 will be called adm1025. 118 119config SENSORS_ADM1026 120 tristate "Analog Devices ADM1026 and compatibles" 121 depends on I2C 122 select HWMON_VID 123 help 124 If you say yes here you get support for Analog Devices ADM1026 125 sensor chip. 126 127 This driver can also be built as a module. If so, the module 128 will be called adm1026. 129 130config SENSORS_ADM1029 131 tristate "Analog Devices ADM1029" 132 depends on I2C 133 help 134 If you say yes here you get support for Analog Devices ADM1029 135 sensor chip. 136 Very rare chip, please let us know you use it. 137 138 This driver can also be built as a module. If so, the module 139 will be called adm1029. 140 141config SENSORS_ADM1031 142 tristate "Analog Devices ADM1031 and compatibles" 143 depends on I2C 144 help 145 If you say yes here you get support for Analog Devices ADM1031 146 and ADM1030 sensor chips. 147 148 This driver can also be built as a module. If so, the module 149 will be called adm1031. 150 151config SENSORS_ADM1177 152 tristate "Analog Devices ADM1177 and compatibles" 153 depends on I2C 154 help 155 If you say yes here you get support for Analog Devices ADM1177 156 sensor chips. 157 158 This driver can also be built as a module. If so, the module 159 will be called adm1177. 160 161config SENSORS_ADM9240 162 tristate "Analog Devices ADM9240 and compatibles" 163 depends on I2C 164 select HWMON_VID 165 select REGMAP_I2C 166 help 167 If you say yes here you get support for Analog Devices ADM9240, 168 Dallas DS1780, National Semiconductor LM81 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm9240. 172 173config SENSORS_ADT7X10 174 tristate 175 select REGMAP 176 help 177 This module contains common code shared by the ADT7310/ADT7320 and 178 ADT7410/ADT7420 temperature monitoring chip drivers. 179 180 If built as a module, the module will be called adt7x10. 181 182config SENSORS_ADT7310 183 tristate "Analog Devices ADT7310/ADT7320" 184 depends on SPI_MASTER 185 select SENSORS_ADT7X10 186 help 187 If you say yes here you get support for the Analog Devices 188 ADT7310 and ADT7320 temperature monitoring chips. 189 190 This driver can also be built as a module. If so, the module 191 will be called adt7310. 192 193config SENSORS_ADT7410 194 tristate "Analog Devices ADT7410/ADT7420" 195 depends on I2C 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7410 and ADT7420 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7410. 203 204config SENSORS_ADT7411 205 tristate "Analog Devices ADT7411" 206 depends on I2C 207 help 208 If you say yes here you get support for the Analog Devices 209 ADT7411 voltage and temperature monitoring chip. 210 211 This driver can also be built as a module. If so, the module 212 will be called adt7411. 213 214config SENSORS_ADT7462 215 tristate "Analog Devices ADT7462" 216 depends on I2C 217 help 218 If you say yes here you get support for the Analog Devices 219 ADT7462 temperature monitoring chips. 220 221 This driver can also be built as a module. If so, the module 222 will be called adt7462. 223 224config SENSORS_ADT7470 225 tristate "Analog Devices ADT7470" 226 depends on I2C 227 help 228 If you say yes here you get support for the Analog Devices 229 ADT7470 temperature monitoring chips. 230 231 This driver can also be built as a module. If so, the module 232 will be called adt7470. 233 234config SENSORS_ADT7475 235 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 236 depends on I2C 237 select HWMON_VID 238 help 239 If you say yes here you get support for the Analog Devices 240 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 241 chips. 242 243 This driver can also be built as a module. If so, the module 244 will be called adt7475. 245 246config SENSORS_AHT10 247 tristate "Aosong AHT10, AHT20" 248 depends on I2C 249 select CRC8 250 help 251 If you say yes here, you get support for the Aosong AHT10 and AHT20 252 temperature and humidity sensors 253 254 This driver can also be built as a module. If so, the module 255 will be called aht10. 256 257config SENSORS_AQUACOMPUTER_D5NEXT 258 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 259 depends on USB_HID 260 select CRC16 261 help 262 If you say yes here you get support for sensors and fans of 263 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 264 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 265 Next sensor, where available. 266 267 This driver can also be built as a module. If so, the module 268 will be called aquacomputer_d5next. 269 270config SENSORS_AS370 271 tristate "Synaptics AS370 SoC hardware monitoring driver" 272 help 273 If you say yes here you get support for the PVT sensors of 274 the Synaptics AS370 SoC 275 276 This driver can also be built as a module. If so, the module 277 will be called as370-hwmon. 278 279 280config SENSORS_ASC7621 281 tristate "Andigilog aSC7621" 282 depends on I2C 283 help 284 If you say yes here you get support for the aSC7621 285 family of SMBus sensors chip found on most Intel X38, X48, X58, 286 945, 965 and 975 desktop boards. Currently supported chips: 287 aSC7621 288 aSC7621a 289 290 This driver can also be built as a module. If so, the module 291 will be called asc7621. 292 293config SENSORS_ASUS_ROG_RYUJIN 294 tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver" 295 depends on HID 296 help 297 If you say yes here you get support for the fans and sensors of 298 the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler. 299 300 This driver can also be built as a module. If so, the module 301 will be called asus_rog_ryujin. 302 303config SENSORS_AXI_FAN_CONTROL 304 tristate "Analog Devices FAN Control HDL Core driver" 305 help 306 If you say yes here you get support for the Analog Devices 307 AXI HDL FAN monitoring core. 308 309 This driver can also be built as a module. If so, the module 310 will be called axi-fan-control 311 312config SENSORS_K8TEMP 313 tristate "AMD Athlon64/FX or Opteron temperature sensor" 314 depends on X86 && PCI 315 help 316 If you say yes here you get support for the temperature 317 sensor(s) inside your CPU. Supported is whole AMD K8 318 microarchitecture. Please note that you will need at least 319 lm-sensors 2.10.1 for proper userspace support. 320 321 This driver can also be built as a module. If so, the module 322 will be called k8temp. 323 324config SENSORS_K10TEMP 325 tristate "AMD Family 10h+ temperature sensor" 326 depends on X86 && PCI && AMD_NB 327 help 328 If you say yes here you get support for the temperature 329 sensor(s) inside your CPU. Supported are later revisions of 330 the AMD Family 10h and all revisions of the AMD Family 11h, 331 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 332 and 16h (Kabini/Mullins) microarchitectures. 333 334 This driver can also be built as a module. If so, the module 335 will be called k10temp. 336 337config SENSORS_FAM15H_POWER 338 tristate "AMD Family 15h processor power" 339 depends on X86 && PCI && CPU_SUP_AMD 340 help 341 If you say yes here you get support for processor power 342 information of your AMD family 15h CPU. 343 344 This driver can also be built as a module. If so, the module 345 will be called fam15h_power. 346 347config SENSORS_APPLESMC 348 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 349 depends on INPUT && X86 350 select NEW_LEDS 351 select LEDS_CLASS 352 help 353 This driver provides support for the Apple System Management 354 Controller, which provides an accelerometer (Apple Sudden Motion 355 Sensor), light sensors, temperature sensors, keyboard backlight 356 control and fan control. 357 358 Only Intel-based Apple's computers are supported (MacBook Pro, 359 MacBook, MacMini). 360 361 Data from the different sensors, keyboard backlight control and fan 362 control are accessible via sysfs. 363 364 This driver also provides an absolute input class device, allowing 365 the laptop to act as a pinball machine-esque joystick. 366 367 Say Y here if you have an applicable laptop and want to experience 368 the awesome power of applesmc. 369 370config SENSORS_ARM_SCMI 371 tristate "ARM SCMI Sensors" 372 depends on ARM_SCMI_PROTOCOL 373 depends on THERMAL || !THERMAL_OF 374 help 375 This driver provides support for temperature, voltage, current 376 and power sensors available on SCMI based platforms. The actual 377 number and type of sensors exported depend on the platform. 378 379 This driver can also be built as a module. If so, the module 380 will be called scmi-hwmon. 381 382config SENSORS_ARM_SCPI 383 tristate "ARM SCPI Sensors" 384 depends on ARM_SCPI_PROTOCOL 385 depends on THERMAL || !THERMAL_OF 386 help 387 This driver provides support for temperature, voltage, current 388 and power sensors available on ARM Ltd's SCP based platforms. The 389 actual number and type of sensors exported depend on the platform. 390 391config SENSORS_ASB100 392 tristate "Asus ASB100 Bach" 393 depends on (X86 || COMPILE_TEST) && I2C 394 select HWMON_VID 395 help 396 If you say yes here you get support for the ASB100 Bach sensor 397 chip found on some Asus mainboards. 398 399 This driver can also be built as a module. If so, the module 400 will be called asb100. 401 402config SENSORS_ASPEED 403 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 404 depends on ARCH_ASPEED || COMPILE_TEST 405 depends on THERMAL || THERMAL=n 406 select REGMAP 407 help 408 This driver provides support for ASPEED AST2400/AST2500 PWM 409 and Fan Tacho controllers. 410 411 This driver can also be built as a module. If so, the module 412 will be called aspeed_pwm_tacho. 413 414config SENSORS_ASPEED_G6 415 tristate "ASPEED g6 PWM and Fan tach driver" 416 depends on ARCH_ASPEED || COMPILE_TEST 417 depends on PWM 418 help 419 This driver provides support for ASPEED G6 PWM and Fan Tach 420 controllers. 421 422 This driver can also be built as a module. If so, the module 423 will be called aspeed_pwm_tacho. 424 425config SENSORS_ATXP1 426 tristate "Attansic ATXP1 VID controller" 427 depends on I2C 428 select HWMON_VID 429 help 430 If you say yes here you get support for the Attansic ATXP1 VID 431 controller. 432 433 If your board have such a chip, you are able to control your CPU 434 core and other voltages. 435 436 This driver can also be built as a module. If so, the module 437 will be called atxp1. 438 439config SENSORS_BT1_PVT 440 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 441 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 442 select POLYNOMIAL 443 help 444 If you say yes here you get support for Baikal-T1 PVT sensor 445 embedded into the SoC. 446 447 This driver can also be built as a module. If so, the module will be 448 called bt1-pvt. 449 450config SENSORS_BT1_PVT_ALARMS 451 bool "Enable Baikal-T1 PVT sensor alarms" 452 depends on SENSORS_BT1_PVT 453 help 454 Baikal-T1 PVT IP-block provides threshold registers for each 455 supported sensor. But the corresponding interrupts might be 456 generated by the thresholds comparator only in synchronization with 457 a data conversion. Additionally there is only one sensor data can 458 be converted at a time. All of these makes the interface impossible 459 to be used for the hwmon alarms implementation without periodic 460 switch between the PVT sensors. By default the data conversion is 461 performed on demand from the user-space. If this config is enabled 462 the data conversion will be periodically performed and the data will be 463 saved in the internal driver cache. 464 465config SENSORS_CHIPCAP2 466 tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" 467 depends on I2C 468 help 469 Say yes here to build support for the Amphenol ChipCap 2 470 relative humidity and temperature sensor. 471 472 To compile this driver as a module, choose M here: the module 473 will be called chipcap2. 474 475config SENSORS_CORSAIR_CPRO 476 tristate "Corsair Commander Pro controller" 477 depends on HID 478 help 479 If you say yes here you get support for the Corsair Commander Pro 480 controller. 481 482 This driver can also be built as a module. If so, the module 483 will be called corsair-cpro. 484 485config SENSORS_CORSAIR_PSU 486 tristate "Corsair PSU HID controller" 487 depends on HID 488 help 489 If you say yes here you get support for Corsair PSUs with a HID 490 interface. 491 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 492 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 493 by Corsair. 494 495 This driver can also be built as a module. If so, the module 496 will be called corsair-psu. 497 498config SENSORS_CROS_EC 499 tristate "ChromeOS Embedded Controller sensors" 500 depends on MFD_CROS_EC_DEV 501 default MFD_CROS_EC_DEV 502 help 503 If you say yes here you get support for ChromeOS Embedded Controller 504 sensors. 505 506 This driver can also be built as a module. If so, the module 507 will be called cros_ec_hwmon. 508 509config SENSORS_DRIVETEMP 510 tristate "Hard disk drives with temperature sensors" 511 depends on SCSI && ATA 512 help 513 If you say yes you get support for the temperature sensor on 514 hard disk drives. 515 516 This driver can also be built as a module. If so, the module 517 will be called drivetemp. 518 519config SENSORS_DS620 520 tristate "Dallas Semiconductor DS620" 521 depends on I2C 522 help 523 If you say yes here you get support for Dallas Semiconductor 524 DS620 sensor chip. 525 526 This driver can also be built as a module. If so, the module 527 will be called ds620. 528 529config SENSORS_DS1621 530 tristate "Dallas Semiconductor DS1621 and compatibles" 531 depends on I2C 532 help 533 If you say yes here you get support for Dallas Semiconductor/Maxim 534 Integrated DS1621 sensor chips and compatible models including: 535 536 - Dallas Semiconductor DS1625 537 - Maxim Integrated DS1631 538 - Maxim Integrated DS1721 539 - Maxim Integrated DS1731 540 541 This driver can also be built as a module. If so, the module 542 will be called ds1621. 543 544config SENSORS_DELL_SMM 545 tristate "Dell laptop SMM BIOS hwmon driver" 546 depends on ACPI_WMI 547 depends on X86 548 imply THERMAL 549 help 550 This hwmon driver adds support for reporting temperature of different 551 sensors and controls the fans on Dell laptops via System Management 552 Mode provided by Dell BIOS. 553 554 When option I8K is also enabled this driver provides legacy /proc/i8k 555 userspace interface for i8kutils package. 556 557config I8K 558 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 559 depends on SENSORS_DELL_SMM 560 depends on PROC_FS 561 help 562 This option enables the legacy /proc/i8k userspace interface of the 563 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 564 version, temperatures and allows control of fan speeds of some Dell 565 laptops. Sometimes it also reports power and hotkey status. 566 567 This interface is required to run programs from the i8kutils package. 568 569 Say Y if you intend to run userspace programs that use this interface. 570 Say N otherwise. 571 572config SENSORS_DA9052_ADC 573 tristate "Dialog DA9052/DA9053 ADC" 574 depends on PMIC_DA9052 575 help 576 Say y here to support the ADC found on Dialog Semiconductor 577 DA9052-BC and DA9053-AA/Bx PMICs. 578 579 This driver can also be built as module. If so, the module 580 will be called da9052-hwmon. 581 582config SENSORS_DA9055 583 tristate "Dialog Semiconductor DA9055 ADC" 584 depends on MFD_DA9055 585 help 586 If you say yes here you get support for ADC on the Dialog 587 Semiconductor DA9055 PMIC. 588 589 This driver can also be built as a module. If so, the module 590 will be called da9055-hwmon. 591 592config SENSORS_I5K_AMB 593 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 594 depends on PCI 595 help 596 If you say yes here you get support for FB-DIMM AMB temperature 597 monitoring chips on systems with the Intel 5000 series chipset. 598 599 This driver can also be built as a module. If so, the module 600 will be called i5k_amb. 601 602config SENSORS_SPARX5 603 tristate "Sparx5 SoC temperature sensor" 604 depends on ARCH_SPARX5 || COMPILE_TEST 605 help 606 If you say yes here you get support for temperature monitoring 607 with the Microchip Sparx5 SoC. 608 609 This driver can also be built as a module. If so, the module 610 will be called sparx5-temp. 611 612config SENSORS_F71805F 613 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 614 depends on HAS_IOPORT 615 depends on !PPC 616 help 617 If you say yes here you get support for hardware monitoring 618 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 619 Super-I/O chips. 620 621 This driver can also be built as a module. If so, the module 622 will be called f71805f. 623 624config SENSORS_F71882FG 625 tristate "Fintek F71882FG and compatibles" 626 depends on HAS_IOPORT 627 depends on !PPC 628 help 629 If you say yes here you get support for hardware monitoring 630 features of many Fintek Super-I/O (LPC) chips. The currently 631 supported chips are: 632 F71808E/A 633 F71858FG 634 F71862FG 635 F71863FG 636 F71869F/E/A 637 F71882FG 638 F71883FG 639 F71889FG/ED/A 640 F8000 641 F81801U 642 F81865F 643 644 This driver can also be built as a module. If so, the module 645 will be called f71882fg. 646 647config SENSORS_F75375S 648 tristate "Fintek F75375S/SP, F75373 and F75387" 649 depends on I2C 650 help 651 If you say yes here you get support for hardware monitoring 652 features of the Fintek F75375S/SP, F75373 and F75387 653 654 This driver can also be built as a module. If so, the module 655 will be called f75375s. 656 657config SENSORS_GSC 658 tristate "Gateworks System Controller ADC" 659 depends on MFD_GATEWORKS_GSC 660 help 661 Support for the Gateworks System Controller A/D converters. 662 663 To compile this driver as a module, choose M here: 664 the module will be called gsc-hwmon. 665 666config SENSORS_MC13783_ADC 667 tristate "Freescale MC13783/MC13892 ADC" 668 depends on MFD_MC13XXX 669 help 670 Support for the A/D converter on MC13783 and MC13892 PMIC. 671 672config SENSORS_FSCHMD 673 tristate "Fujitsu Siemens Computers sensor chips" 674 depends on (X86 || COMPILE_TEST) && I2C 675 help 676 If you say yes here you get support for the following Fujitsu 677 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 678 Heimdall, Heracles, Hades and Syleus including support for the 679 integrated watchdog. 680 681 This is a merged driver for FSC sensor chips replacing the fscpos, 682 fscscy and fscher drivers and adding support for several other FSC 683 sensor chips. 684 685 This driver can also be built as a module. If so, the module 686 will be called fschmd. 687 688config SENSORS_FTSTEUTATES 689 tristate "Fujitsu Technology Solutions sensor chip Teutates" 690 depends on I2C && WATCHDOG 691 select WATCHDOG_CORE 692 help 693 If you say yes here you get support for the Fujitsu Technology 694 Solutions (FTS) sensor chip "Teutates" including support for 695 the integrated watchdog. 696 697 This driver can also be built as a module. If so, the module 698 will be called ftsteutates. 699 700config SENSORS_GIGABYTE_WATERFORCE 701 tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" 702 depends on USB_HID 703 help 704 If you say yes here you get support for hardware monitoring for the 705 Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. 706 707 This driver can also be built as a module. If so, the module 708 will be called gigabyte_waterforce. 709 710config SENSORS_GL518SM 711 tristate "Genesys Logic GL518SM" 712 depends on I2C 713 help 714 If you say yes here you get support for Genesys Logic GL518SM 715 sensor chips. 716 717 This driver can also be built as a module. If so, the module 718 will be called gl518sm. 719 720config SENSORS_GL520SM 721 tristate "Genesys Logic GL520SM" 722 depends on I2C 723 select HWMON_VID 724 help 725 If you say yes here you get support for Genesys Logic GL520SM 726 sensor chips. 727 728 This driver can also be built as a module. If so, the module 729 will be called gl520sm. 730 731config SENSORS_G760A 732 tristate "GMT G760A" 733 depends on I2C 734 help 735 If you say yes here you get support for Global Mixed-mode 736 Technology Inc G760A fan speed PWM controller chips. 737 738 This driver can also be built as a module. If so, the module 739 will be called g760a. 740 741config SENSORS_G762 742 tristate "GMT G762 and G763" 743 depends on I2C 744 help 745 If you say yes here you get support for Global Mixed-mode 746 Technology Inc G762 and G763 fan speed PWM controller chips. 747 748 This driver can also be built as a module. If so, the module 749 will be called g762. 750 751config SENSORS_GPIO_FAN 752 tristate "GPIO fan" 753 depends on OF_GPIO 754 depends on GPIOLIB || COMPILE_TEST 755 depends on THERMAL || THERMAL=n 756 help 757 If you say yes here you get support for fans connected to GPIO lines. 758 759 This driver can also be built as a module. If so, the module 760 will be called gpio-fan. 761 762config SENSORS_GXP_FAN_CTRL 763 tristate "HPE GXP fan controller" 764 depends on ARCH_HPE_GXP || COMPILE_TEST 765 help 766 If you say yes here you get support for GXP fan control functionality. 767 768 The GXP controls fan function via the CPLD through the use of PWM 769 registers. This driver reports status and pwm setting of the fans. 770 771config SENSORS_HIH6130 772 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 773 depends on I2C 774 help 775 If you say yes here you get support for Honeywell Humidicon 776 HIH-6130 and HIH-6131 Humidicon humidity sensors. 777 778 This driver can also be built as a module. If so, the module 779 will be called hih6130. 780 781config SENSORS_HS3001 782 tristate "Renesas HS3001 humidity and temperature sensors" 783 depends on I2C 784 help 785 If you say yes here you get support for the Renesas HS3001, 786 to HS3004 humidity and temperature sensors. 787 788 This driver can also be built as a module. If so, the module 789 will be called hs3001. 790 791config SENSORS_IBMAEM 792 tristate "IBM Active Energy Manager temperature/power sensors and control" 793 select IPMI_SI 794 depends on IPMI_HANDLER 795 help 796 If you say yes here you get support for the temperature and 797 power sensors and capping hardware in various IBM System X 798 servers that support Active Energy Manager. This includes 799 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 800 and certain HC10/HS2x/LS2x/QS2x blades. 801 802 This driver can also be built as a module. If so, the module 803 will be called ibmaem. 804 805config SENSORS_IBMPEX 806 tristate "IBM PowerExecutive temperature/power sensors" 807 select IPMI_SI 808 depends on IPMI_HANDLER 809 help 810 If you say yes here you get support for the temperature and 811 power sensors in various IBM System X servers that support 812 PowerExecutive. So far this includes the x3350, x3550, x3650, 813 x3655, and x3755; the x3800, x3850, and x3950 models that have 814 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 815 816 This driver can also be built as a module. If so, the module 817 will be called ibmpex. 818 819config SENSORS_IBMPOWERNV 820 tristate "IBM POWERNV platform sensors" 821 depends on PPC_POWERNV 822 default y 823 help 824 If you say yes here you get support for the temperature/fan/power 825 sensors on your PowerNV platform. 826 827 This driver can also be built as a module. If so, the module 828 will be called ibmpowernv. 829 830config SENSORS_IIO_HWMON 831 tristate "Hwmon driver that uses channels specified via iio maps" 832 depends on IIO 833 help 834 This is a platform driver that in combination with a suitable 835 map allows IIO devices to provide basic hwmon functionality 836 for those channels specified in the map. This map can be provided 837 either via platform data or the device tree bindings. 838 839config SENSORS_I5500 840 tristate "Intel 5500/5520/X58 temperature sensor" 841 depends on X86 && PCI 842 help 843 If you say yes here you get support for the temperature 844 sensor inside the Intel 5500, 5520 and X58 chipsets. 845 846 This driver can also be built as a module. If so, the module 847 will be called i5500_temp. 848 849config SENSORS_CORETEMP 850 tristate "Intel Core/Core2/Atom temperature sensor" 851 depends on X86 852 help 853 If you say yes here you get support for the temperature 854 sensor inside your CPU. Most of the family 6 CPUs 855 are supported. Check Documentation/hwmon/coretemp.rst for details. 856 857config SENSORS_IT87 858 tristate "ITE IT87xx and compatibles" 859 depends on HAS_IOPORT 860 depends on !PPC 861 select HWMON_VID 862 help 863 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 864 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 865 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 866 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 867 clone. 868 869 This driver can also be built as a module. If so, the module 870 will be called it87. 871 872config SENSORS_JC42 873 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 874 depends on I2C 875 select REGMAP_I2C 876 help 877 If you say yes here, you get support for JEDEC JC42.4 compliant 878 temperature sensors, which are used on many DDR3 memory modules for 879 mobile devices and servers. Support will include, but not be limited 880 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 881 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 882 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 883 884 This driver can also be built as a module. If so, the module 885 will be called jc42. 886 887config SENSORS_POWERZ 888 tristate "ChargerLAB POWER-Z USB-C tester" 889 depends on USB 890 help 891 If you say yes here you get support for ChargerLAB POWER-Z series of 892 USB-C charging testers. 893 894 This driver can also be built as a module. If so, the module 895 will be called powerz. 896 897config SENSORS_POWR1220 898 tristate "Lattice POWR1220 Power Monitoring" 899 depends on I2C 900 help 901 If you say yes here you get access to the hardware monitoring 902 functions of the Lattice POWR1220 isp Power Supply Monitoring, 903 Sequencing and Margining Controller. 904 905 This driver can also be built as a module. If so, the module 906 will be called powr1220. 907 908config SENSORS_LAN966X 909 tristate "Microchip LAN966x Hardware Monitoring" 910 depends on SOC_LAN966 || COMPILE_TEST 911 select REGMAP 912 select POLYNOMIAL 913 help 914 If you say yes here you get support for temperature monitoring 915 on the Microchip LAN966x SoC. 916 917 This driver can also be built as a module. If so, the module 918 will be called lan966x-hwmon. 919 920config SENSORS_LENOVO_EC 921 tristate "Sensor reader for Lenovo ThinkStations" 922 depends on X86 923 help 924 If you say yes here you get support for LENOVO 925 EC Sensor data on newer ThinkStation systems 926 927 This driver can also be built as a module. If so, the module 928 will be called lenovo_ec_sensors. 929 930config SENSORS_LINEAGE 931 tristate "Lineage Compact Power Line Power Entry Module" 932 depends on I2C 933 help 934 If you say yes here you get support for the Lineage Compact Power Line 935 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 936 CP2000DC, CP2725, and others. 937 938 This driver can also be built as a module. If so, the module 939 will be called lineage-pem. 940 941config SENSORS_LOCHNAGAR 942 tristate "Lochnagar Hardware Monitor" 943 depends on MFD_LOCHNAGAR 944 help 945 If you say yes here you get support for Lochnagar 2 temperature, 946 voltage and current sensors abilities. 947 948 This driver can also be built as a module. If so, the module 949 will be called lochnagar-hwmon. 950 951config SENSORS_LTC2945 952 tristate "Linear Technology LTC2945" 953 depends on I2C 954 select REGMAP_I2C 955 help 956 If you say yes here you get support for Linear Technology LTC2945 957 I2C System Monitor. 958 959 This driver can also be built as a module. If so, the module will 960 be called ltc2945. 961 962config SENSORS_LTC2947 963 tristate 964 965config SENSORS_LTC2947_I2C 966 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 967 depends on I2C 968 select REGMAP_I2C 969 select SENSORS_LTC2947 970 help 971 If you say yes here you get support for Linear Technology LTC2947 972 I2C High Precision Power and Energy Monitor 973 974 This driver can also be built as a module. If so, the module will 975 be called ltc2947-i2c. 976 977config SENSORS_LTC2947_SPI 978 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 979 depends on SPI_MASTER 980 select REGMAP_SPI 981 select SENSORS_LTC2947 982 help 983 If you say yes here you get support for Linear Technology LTC2947 984 SPI High Precision Power and Energy Monitor 985 986 This driver can also be built as a module. If so, the module will 987 be called ltc2947-spi. 988 989config SENSORS_LTC2990 990 tristate "Linear Technology LTC2990" 991 depends on I2C 992 help 993 If you say yes here you get support for Linear Technology LTC2990 994 I2C System Monitor. The LTC2990 supports a combination of voltage, 995 current and temperature monitoring. 996 997 This driver can also be built as a module. If so, the module will 998 be called ltc2990. 999 1000config SENSORS_LTC2991 1001 tristate "Analog Devices LTC2991" 1002 depends on I2C 1003 help 1004 If you say yes here you get support for Analog Devices LTC2991 1005 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 1006 supports a combination of voltage, current and temperature monitoring. 1007 1008 This driver can also be built as a module. If so, the module will 1009 be called ltc2991. 1010 1011config SENSORS_LTC2992 1012 tristate "Linear Technology LTC2992" 1013 depends on I2C 1014 depends on GPIOLIB 1015 help 1016 If you say yes here you get support for Linear Technology LTC2992 1017 I2C System Monitor. The LTC2992 measures current, voltage, and 1018 power of two supplies. 1019 1020 This driver can also be built as a module. If so, the module will 1021 be called ltc2992. 1022 1023config SENSORS_LTC4151 1024 tristate "Linear Technology LTC4151" 1025 depends on I2C 1026 help 1027 If you say yes here you get support for Linear Technology LTC4151 1028 High Voltage I2C Current and Voltage Monitor interface. 1029 1030 This driver can also be built as a module. If so, the module will 1031 be called ltc4151. 1032 1033config SENSORS_LTC4215 1034 tristate "Linear Technology LTC4215" 1035 depends on I2C 1036 help 1037 If you say yes here you get support for Linear Technology LTC4215 1038 Hot Swap Controller I2C interface. 1039 1040 This driver can also be built as a module. If so, the module will 1041 be called ltc4215. 1042 1043config SENSORS_LTC4222 1044 tristate "Linear Technology LTC4222" 1045 depends on I2C 1046 select REGMAP_I2C 1047 help 1048 If you say yes here you get support for Linear Technology LTC4222 1049 Dual Hot Swap Controller I2C interface. 1050 1051 This driver can also be built as a module. If so, the module will 1052 be called ltc4222. 1053 1054config SENSORS_LTC4245 1055 tristate "Linear Technology LTC4245" 1056 depends on I2C 1057 help 1058 If you say yes here you get support for Linear Technology LTC4245 1059 Multiple Supply Hot Swap Controller I2C interface. 1060 1061 This driver can also be built as a module. If so, the module will 1062 be called ltc4245. 1063 1064config SENSORS_LTC4260 1065 tristate "Linear Technology LTC4260" 1066 depends on I2C 1067 select REGMAP_I2C 1068 help 1069 If you say yes here you get support for Linear Technology LTC4260 1070 Positive Voltage Hot Swap Controller I2C interface. 1071 1072 This driver can also be built as a module. If so, the module will 1073 be called ltc4260. 1074 1075config SENSORS_LTC4261 1076 tristate "Linear Technology LTC4261" 1077 depends on I2C 1078 help 1079 If you say yes here you get support for Linear Technology LTC4261 1080 Negative Voltage Hot Swap Controller I2C interface. 1081 1082 This driver can also be built as a module. If so, the module will 1083 be called ltc4261. 1084 1085config SENSORS_LTC4282 1086 tristate "Analog Devices LTC4282" 1087 depends on I2C 1088 select REGMAP_I2C 1089 help 1090 If you say yes here you get support for Analog Devices LTC4282 1091 High Current Hot Swap Controller I2C interface. 1092 1093 This driver can also be built as a module. If so, the module will 1094 be called ltc4282. 1095 1096config SENSORS_LTQ_CPUTEMP 1097 bool "Lantiq cpu temperature sensor driver" 1098 depends on SOC_XWAY 1099 help 1100 If you say yes here you get support for the temperature 1101 sensor inside your CPU. 1102 1103config SENSORS_MAX1111 1104 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1105 depends on SPI_MASTER 1106 help 1107 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1108 ADC chips. 1109 1110 This driver can also be built as a module. If so, the module 1111 will be called max1111. 1112 1113config SENSORS_MAX127 1114 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1115 depends on I2C 1116 help 1117 Say y here to support Maxim's MAX127 DAS chips. 1118 1119 This driver can also be built as a module. If so, the module 1120 will be called max127. 1121 1122config SENSORS_MAX16065 1123 tristate "Maxim MAX16065 System Manager and compatibles" 1124 depends on I2C 1125 help 1126 If you say yes here you get support for hardware monitoring 1127 capabilities of the following Maxim System Manager chips. 1128 MAX16065 1129 MAX16066 1130 MAX16067 1131 MAX16068 1132 MAX16070 1133 MAX16071 1134 1135 This driver can also be built as a module. If so, the module 1136 will be called max16065. 1137 1138config SENSORS_MAX1619 1139 tristate "Maxim MAX1619 sensor chip" 1140 depends on I2C 1141 help 1142 If you say yes here you get support for MAX1619 sensor chip. 1143 1144 This driver can also be built as a module. If so, the module 1145 will be called max1619. 1146 1147config SENSORS_MAX1668 1148 tristate "Maxim MAX1668 and compatibles" 1149 depends on I2C 1150 help 1151 If you say yes here you get support for MAX1668, MAX1989 and 1152 MAX1805 chips. 1153 1154 This driver can also be built as a module. If so, the module 1155 will be called max1668. 1156 1157config SENSORS_MAX197 1158 tristate "Maxim MAX197 and compatibles" 1159 help 1160 Support for the Maxim MAX197 A/D converter. 1161 Support will include, but not be limited to, MAX197, and MAX199. 1162 1163 This driver can also be built as a module. If so, the module 1164 will be called max197. 1165 1166config SENSORS_MAX31722 1167 tristate "MAX31722 temperature sensor" 1168 depends on SPI 1169 help 1170 Support for the Maxim Integrated MAX31722/MAX31723 digital 1171 thermometers/thermostats operating over an SPI interface. 1172 1173 This driver can also be built as a module. If so, the module 1174 will be called max31722. 1175 1176config SENSORS_MAX31730 1177 tristate "MAX31730 temperature sensor" 1178 depends on I2C 1179 help 1180 Support for the Maxim Integrated MAX31730 3-Channel Remote 1181 Temperature Sensor. 1182 1183 This driver can also be built as a module. If so, the module 1184 will be called max31730. 1185 1186config SENSORS_MAX31760 1187 tristate "MAX31760 fan speed controller" 1188 depends on I2C 1189 select REGMAP_I2C 1190 help 1191 Support for the Analog Devices MAX31760 Precision Fan-Speed 1192 Controller. MAX31760 integrates temperature sensing along with 1193 precision PWM fan control. 1194 1195 This driver can also be built as a module. If so, the module 1196 will be called max31760. 1197 1198config MAX31827 1199 tristate "MAX31827 low-power temperature switch and similar devices" 1200 depends on I2C 1201 select REGMAP_I2C 1202 help 1203 If you say yes here you get support for MAX31827, MAX31828 and 1204 MAX31829 low-power temperature switches and sensors connected with I2C. 1205 1206 This driver can also be built as a module. If so, the module 1207 will be called max31827. 1208 1209config SENSORS_MAX6620 1210 tristate "Maxim MAX6620 fan controller" 1211 depends on I2C 1212 help 1213 If you say yes here you get support for the MAX6620 1214 fan controller. 1215 1216 This driver can also be built as a module. If so, the module 1217 will be called max6620. 1218 1219config SENSORS_MAX6621 1220 tristate "Maxim MAX6621 sensor chip" 1221 depends on I2C 1222 select REGMAP_I2C 1223 help 1224 If you say yes here you get support for MAX6621 sensor chip. 1225 MAX6621 is a PECI-to-I2C translator provides an efficient, 1226 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1227 It allows reading the temperature from the PECI-compliant 1228 host directly from up to four PECI-enabled CPUs. 1229 1230 This driver can also be built as a module. If so, the module 1231 will be called max6621. 1232 1233config SENSORS_MAX6639 1234 tristate "Maxim MAX6639 sensor chip" 1235 depends on I2C 1236 select REGMAP_I2C 1237 help 1238 If you say yes here you get support for the MAX6639 1239 sensor chips. 1240 1241 This driver can also be built as a module. If so, the module 1242 will be called max6639. 1243 1244config SENSORS_MAX6650 1245 tristate "Maxim MAX6650 sensor chip" 1246 depends on I2C 1247 depends on THERMAL || THERMAL=n 1248 help 1249 If you say yes here you get support for the MAX6650 / MAX6651 1250 sensor chips. 1251 1252 This driver can also be built as a module. If so, the module 1253 will be called max6650. 1254 1255config SENSORS_MAX6697 1256 tristate "Maxim MAX6697 and compatibles" 1257 depends on I2C 1258 help 1259 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1260 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1261 temperature sensor chips. 1262 1263 This driver can also be built as a module. If so, the module 1264 will be called max6697. 1265 1266config SENSORS_MAX31790 1267 tristate "Maxim MAX31790 sensor chip" 1268 depends on I2C 1269 help 1270 If you say yes here you get support for 6-Channel PWM-Output 1271 Fan RPM Controller. 1272 1273 This driver can also be built as a module. If so, the module 1274 will be called max31790. 1275 1276config SENSORS_MC34VR500 1277 tristate "NXP MC34VR500 hardware monitoring driver" 1278 depends on I2C 1279 select REGMAP_I2C 1280 help 1281 If you say yes here you get support for the temperature and input 1282 voltage sensors of the NXP MC34VR500. 1283 1284config SENSORS_MCP3021 1285 tristate "Microchip MCP3021 and compatibles" 1286 depends on I2C 1287 help 1288 If you say yes here you get support for MCP3021 and MCP3221. 1289 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1290 with 12-bit resolution. 1291 1292 This driver can also be built as a module. If so, the module 1293 will be called mcp3021. 1294 1295config SENSORS_MLXREG_FAN 1296 tristate "Mellanox FAN driver" 1297 depends on MELLANOX_PLATFORM 1298 imply THERMAL 1299 select REGMAP 1300 help 1301 This option enables support for the FAN control on the Mellanox 1302 Ethernet and InfiniBand switches. The driver can be activated by the 1303 platform device add call. Say Y to enable these. To compile this 1304 driver as a module, choose 'M' here: the module will be called 1305 mlxreg-fan. 1306 1307config SENSORS_TC654 1308 tristate "Microchip TC654/TC655 and compatibles" 1309 depends on I2C 1310 help 1311 If you say yes here you get support for TC654 and TC655. 1312 The TC654 and TC655 are PWM mode fan speed controllers with 1313 FanSense technology for use with brushless DC fans. 1314 1315 This driver can also be built as a module. If so, the module 1316 will be called tc654. 1317 1318config SENSORS_TPS23861 1319 tristate "Texas Instruments TPS23861 PoE PSE" 1320 depends on I2C 1321 select REGMAP_I2C 1322 help 1323 If you say yes here you get support for Texas Instruments 1324 TPS23861 802.3at PoE PSE chips. 1325 1326 This driver can also be built as a module. If so, the module 1327 will be called tps23861. 1328 1329config SENSORS_MENF21BMC_HWMON 1330 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1331 depends on MFD_MENF21BMC 1332 help 1333 Say Y here to include support for the MEN 14F021P00 BMC 1334 hardware monitoring. 1335 1336 This driver can also be built as a module. If so the module 1337 will be called menf21bmc_hwmon. 1338 1339config SENSORS_MR75203 1340 tristate "Moortec Semiconductor MR75203 PVT Controller" 1341 select REGMAP_MMIO 1342 help 1343 If you say yes here you get support for Moortec MR75203 1344 PVT controller. 1345 1346 This driver can also be built as a module. If so, the module 1347 will be called mr75203. 1348 1349config SENSORS_ADCXX 1350 tristate "National Semiconductor ADCxxxSxxx" 1351 depends on SPI_MASTER 1352 help 1353 If you say yes here you get support for the National Semiconductor 1354 ADC<bb><c>S<sss> chip family, where 1355 * bb is the resolution in number of bits (8, 10, 12) 1356 * c is the number of channels (1, 2, 4, 8) 1357 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1358 kSPS and 101 for 1 MSPS) 1359 1360 Examples : ADC081S101, ADC124S501, ... 1361 1362 This driver can also be built as a module. If so, the module 1363 will be called adcxx. 1364 1365config SENSORS_LM63 1366 tristate "National Semiconductor LM63 and compatibles" 1367 depends on I2C 1368 help 1369 If you say yes here you get support for the National 1370 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1371 sensors with integrated fan control. Such chips are found 1372 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1373 others. 1374 1375 This driver can also be built as a module. If so, the module 1376 will be called lm63. 1377 1378config SENSORS_LM70 1379 tristate "National Semiconductor LM70 and compatibles" 1380 depends on SPI_MASTER 1381 help 1382 If you say yes here you get support for the National Semiconductor 1383 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1384 TMP125 digital temperature sensor chips. 1385 1386 This driver can also be built as a module. If so, the module 1387 will be called lm70. 1388 1389config SENSORS_LM73 1390 tristate "National Semiconductor LM73" 1391 depends on I2C 1392 help 1393 If you say yes here you get support for National Semiconductor LM73 1394 sensor chips. 1395 This driver can also be built as a module. If so, the module 1396 will be called lm73. 1397 1398config SENSORS_LM75 1399 tristate "National Semiconductor LM75 and compatibles" 1400 depends on I2C 1401 select REGMAP_I2C 1402 help 1403 If you say yes here you get support for one common type of 1404 temperature sensor chip, with models including: 1405 1406 - Analog Devices ADT75 1407 - Atmel (now Microchip) AT30TS74 1408 - Dallas Semiconductor DS75, DS1775 and DS7505 1409 - Global Mixed-mode Technology (GMT) G751 1410 - Maxim MAX6625 and MAX6626 1411 - Microchip MCP980x 1412 - National Semiconductor LM75, LM75A 1413 - NXP's LM75A 1414 - ST Microelectronics STDS75 1415 - ST Microelectronics STLM75 1416 - TelCom (now Microchip) TCN75 1417 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1418 TMP175, TMP275 1419 1420 This driver supports driver model based binding through board 1421 specific I2C device tables. 1422 1423 It also supports the "legacy" style of driver binding. To use 1424 that with some chips which don't replicate LM75 quirks exactly, 1425 you may need the "force" module parameter. 1426 1427 This driver can also be built as a module. If so, the module 1428 will be called lm75. 1429 1430config SENSORS_LM77 1431 tristate "National Semiconductor LM77" 1432 depends on I2C 1433 help 1434 If you say yes here you get support for National Semiconductor LM77 1435 sensor chips. 1436 1437 This driver can also be built as a module. If so, the module 1438 will be called lm77. 1439 1440config SENSORS_LM78 1441 tristate "National Semiconductor LM78 and compatibles" 1442 depends on I2C 1443 select HWMON_VID 1444 help 1445 If you say yes here you get support for National Semiconductor LM78, 1446 LM78-J and LM79. 1447 1448 This driver can also be built as a module. If so, the module 1449 will be called lm78. 1450 1451config SENSORS_LM80 1452 tristate "National Semiconductor LM80 and LM96080" 1453 depends on I2C 1454 help 1455 If you say yes here you get support for National Semiconductor 1456 LM80 and LM96080 sensor chips. 1457 1458 This driver can also be built as a module. If so, the module 1459 will be called lm80. 1460 1461config SENSORS_LM83 1462 tristate "National Semiconductor LM83 and compatibles" 1463 depends on I2C 1464 select REGMAP 1465 help 1466 If you say yes here you get support for National Semiconductor 1467 LM82 and LM83 sensor chips. 1468 1469 This driver can also be built as a module. If so, the module 1470 will be called lm83. 1471 1472config SENSORS_LM85 1473 tristate "National Semiconductor LM85 and compatibles" 1474 depends on I2C 1475 select HWMON_VID 1476 help 1477 If you say yes here you get support for National Semiconductor LM85 1478 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1479 EMC6D101, EMC6D102, and EMC6D103. 1480 1481 This driver can also be built as a module. If so, the module 1482 will be called lm85. 1483 1484config SENSORS_LM87 1485 tristate "National Semiconductor LM87 and compatibles" 1486 depends on I2C 1487 select HWMON_VID 1488 help 1489 If you say yes here you get support for National Semiconductor LM87 1490 and Analog Devices ADM1024 sensor chips. 1491 1492 This driver can also be built as a module. If so, the module 1493 will be called lm87. 1494 1495config SENSORS_LM90 1496 tristate "National Semiconductor LM90 and compatibles" 1497 depends on I2C 1498 help 1499 If you say yes here you get support for National Semiconductor LM84, 1500 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1501 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1502 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1503 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1504 MAX6696, 1505 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1506 Winbond/Nuvoton W83L771W/G/AWG/ASG, 1507 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1508 sensor chips. 1509 1510 This driver can also be built as a module. If so, the module 1511 will be called lm90. 1512 1513config SENSORS_LM92 1514 tristate "National Semiconductor LM92 and compatibles" 1515 depends on I2C 1516 select REGMAP_I2C 1517 help 1518 If you say yes here you get support for National Semiconductor LM92 1519 and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. 1520 1521 This driver can also be built as a module. If so, the module 1522 will be called lm92. 1523 1524config SENSORS_LM93 1525 tristate "National Semiconductor LM93 and compatibles" 1526 depends on I2C 1527 select HWMON_VID 1528 help 1529 If you say yes here you get support for National Semiconductor LM93, 1530 LM94, and compatible sensor chips. 1531 1532 This driver can also be built as a module. If so, the module 1533 will be called lm93. 1534 1535config SENSORS_LM95234 1536 tristate "National Semiconductor LM95234 and compatibles" 1537 depends on I2C 1538 select REGMAP_I2C 1539 help 1540 If you say yes here you get support for the LM95233 and LM95234 1541 temperature sensor chips. 1542 1543 This driver can also be built as a module. If so, the module 1544 will be called lm95234. 1545 1546config SENSORS_LM95241 1547 tristate "National Semiconductor LM95241 and compatibles" 1548 depends on I2C 1549 help 1550 If you say yes here you get support for LM95231 and LM95241 sensor 1551 chips. 1552 1553 This driver can also be built as a module. If so, the module 1554 will be called lm95241. 1555 1556config SENSORS_LM95245 1557 tristate "National Semiconductor LM95245 and compatibles" 1558 depends on I2C 1559 select REGMAP_I2C 1560 help 1561 If you say yes here you get support for LM95235 and LM95245 1562 temperature sensor chips. 1563 1564 This driver can also be built as a module. If so, the module 1565 will be called lm95245. 1566 1567config SENSORS_PC87360 1568 tristate "National Semiconductor PC87360 family" 1569 depends on HAS_IOPORT 1570 depends on !PPC 1571 select HWMON_VID 1572 help 1573 If you say yes here you get access to the hardware monitoring 1574 functions of the National Semiconductor PC8736x Super-I/O chips. 1575 The PC87360, PC87363 and PC87364 only have fan monitoring and 1576 control. The PC87365 and PC87366 additionally have voltage and 1577 temperature monitoring. 1578 1579 This driver can also be built as a module. If so, the module 1580 will be called pc87360. 1581 1582config SENSORS_PC87427 1583 tristate "National Semiconductor PC87427" 1584 depends on HAS_IOPORT 1585 depends on !PPC 1586 help 1587 If you say yes here you get access to the hardware monitoring 1588 functions of the National Semiconductor PC87427 Super-I/O chip. 1589 The chip has two distinct logical devices, one for fan speed 1590 monitoring and control, and one for voltage and temperature 1591 monitoring. Fan speed monitoring and control are supported, as 1592 well as temperature monitoring. Voltages aren't supported yet. 1593 1594 This driver can also be built as a module. If so, the module 1595 will be called pc87427. 1596 1597config SENSORS_NTC_THERMISTOR 1598 tristate "NTC thermistor support" 1599 depends on IIO 1600 depends on THERMAL || !THERMAL_OF 1601 help 1602 This driver supports NTC thermistors sensor reading and its 1603 interpretation. The driver can also monitor the temperature and 1604 send notifications about the temperature. 1605 1606 Currently, this driver supports 1607 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1608 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1609 B57891S0103 from EPCOS. 1610 1611 This driver can also be built as a module. If so, the module 1612 will be called ntc-thermistor. 1613 1614config SENSORS_NCT6683 1615 tristate "Nuvoton NCT6683D" 1616 depends on HAS_IOPORT 1617 depends on !PPC 1618 help 1619 If you say yes here you get support for the hardware monitoring 1620 functionality of the Nuvoton NCT6683D eSIO chip. 1621 1622 This driver can also be built as a module. If so, the module 1623 will be called nct6683. 1624 1625config SENSORS_NCT6775_CORE 1626 tristate 1627 select REGMAP 1628 help 1629 This module contains common code shared by the platform and 1630 i2c versions of the nct6775 driver; it is not useful on its 1631 own. 1632 1633 If built as a module, the module will be called 1634 nct6775-core. 1635 1636config SENSORS_NCT6775 1637 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1638 depends on HAS_IOPORT 1639 depends on !PPC 1640 depends on ACPI || ACPI=n 1641 select HWMON_VID 1642 select SENSORS_NCT6775_CORE 1643 help 1644 If you say yes here you get support for the hardware monitoring 1645 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1646 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1647 Super-I/O chips. This driver replaces the w83627ehf driver for 1648 NCT6775F and NCT6776F. 1649 1650 This driver can also be built as a module. If so, the module 1651 will be called nct6775. 1652 1653config SENSORS_NCT6775_I2C 1654 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1655 depends on I2C 1656 select REGMAP_I2C 1657 select SENSORS_NCT6775_CORE 1658 help 1659 If you say yes here you get support for the hardware monitoring 1660 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1661 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1662 Super-I/O chips via their I2C interface. 1663 1664 If you're not building a kernel for a BMC, this is probably 1665 not the driver you want (see CONFIG_SENSORS_NCT6775). 1666 1667 This driver can also be built as a module. If so, the module 1668 will be called nct6775-i2c. 1669 1670config SENSORS_NCT7802 1671 tristate "Nuvoton NCT7802Y" 1672 depends on I2C 1673 select REGMAP_I2C 1674 help 1675 If you say yes here you get support for the Nuvoton NCT7802Y 1676 hardware monitoring chip. 1677 1678 This driver can also be built as a module. If so, the module 1679 will be called nct7802. 1680 1681config SENSORS_NCT7904 1682 tristate "Nuvoton NCT7904" 1683 depends on I2C && WATCHDOG 1684 select WATCHDOG_CORE 1685 help 1686 If you say yes here you get support for the Nuvoton NCT7904 1687 hardware monitoring chip, including manual fan speed control 1688 and support for the integrated watchdog. 1689 1690 This driver can also be built as a module. If so, the module 1691 will be called nct7904. 1692 1693config SENSORS_NPCM7XX 1694 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1695 imply THERMAL 1696 help 1697 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1698 and Fan controllers. 1699 1700 This driver can also be built as a module. If so, the module 1701 will be called npcm750-pwm-fan. 1702 1703config SENSORS_NSA320 1704 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1705 depends on GPIOLIB && OF 1706 depends on MACH_KIRKWOOD || COMPILE_TEST 1707 help 1708 If you say yes here you get support for hardware monitoring 1709 for the ZyXEL NSA320 Media Server and other compatible devices 1710 (probably the NSA325 and some NSA310 variants). 1711 1712 The sensor data is taken from a Holtek HT46R065 microcontroller 1713 connected to GPIO lines. 1714 1715 This driver can also be built as a module. If so, the module 1716 will be called nsa320-hwmon. 1717 1718config SENSORS_NZXT_KRAKEN2 1719 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1720 depends on USB_HID 1721 help 1722 If you say yes here you get support for hardware monitoring for the 1723 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1724 1725 This driver can also be built as a module. If so, the module 1726 will be called nzxt-kraken2. 1727 1728config SENSORS_NZXT_KRAKEN3 1729 tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" 1730 depends on USB_HID 1731 help 1732 If you say yes here you get support for hardware monitoring for the 1733 NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. 1734 1735 This driver can also be built as a module. If so, the module 1736 will be called nzxt-kraken3. 1737 1738config SENSORS_NZXT_SMART2 1739 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1740 depends on USB_HID 1741 help 1742 If you say yes here you get support for hardware monitoring for the 1743 NZXT RGB & Fan Controller/Smart Device v2. 1744 1745 This driver can also be built as a module. If so, the module 1746 will be called nzxt-smart2. 1747 1748source "drivers/hwmon/occ/Kconfig" 1749 1750config SENSORS_OXP 1751 tristate "OneXPlayer EC fan control" 1752 depends on ACPI 1753 depends on X86 1754 help 1755 If you say yes here you get support for fan readings and control over 1756 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant 1757 boards are supported. 1758 1759 Can also be built as a module. In that case it will be called oxp-sensors. 1760 1761config SENSORS_PCF8591 1762 tristate "Philips PCF8591 ADC/DAC" 1763 depends on I2C 1764 help 1765 If you say yes here you get support for Philips PCF8591 4-channel 1766 ADC, 1-channel DAC chips. 1767 1768 This driver can also be built as a module. If so, the module 1769 will be called pcf8591. 1770 1771 These devices are hard to detect and rarely found on mainstream 1772 hardware. If unsure, say N. 1773 1774source "drivers/hwmon/peci/Kconfig" 1775 1776source "drivers/hwmon/pmbus/Kconfig" 1777 1778config SENSORS_PT5161L 1779 tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" 1780 depends on I2C 1781 help 1782 If you say yes here you get support for temperature monitoring 1783 on the Astera Labs PT5161L PCIe retimer. 1784 1785 This driver can also be built as a module. If so, the module 1786 will be called pt5161l. 1787 1788config SENSORS_PWM_FAN 1789 tristate "PWM fan" 1790 depends on PWM || COMPILE_TEST 1791 depends on THERMAL || THERMAL=n 1792 help 1793 If you say yes here you get support for fans connected to PWM lines. 1794 The driver uses the generic PWM interface, thus it will work on a 1795 variety of SoCs. 1796 1797 This driver can also be built as a module. If so, the module 1798 will be called pwm-fan. 1799 1800config SENSORS_RASPBERRYPI_HWMON 1801 tristate "Raspberry Pi voltage monitor" 1802 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1803 help 1804 If you say yes here you get support for voltage sensor on the 1805 Raspberry Pi. 1806 1807 This driver can also be built as a module. If so, the module 1808 will be called raspberrypi-hwmon. 1809 1810config SENSORS_SL28CPLD 1811 tristate "Kontron sl28cpld hardware monitoring driver" 1812 depends on MFD_SL28CPLD || COMPILE_TEST 1813 help 1814 If you say yes here you get support for the fan supervisor of the 1815 sl28cpld board management controller. 1816 1817 This driver can also be built as a module. If so, the module 1818 will be called sl28cpld-hwmon. 1819 1820config SENSORS_SBTSI 1821 tristate "Emulated SB-TSI temperature sensor" 1822 depends on I2C 1823 help 1824 If you say yes here you get support for emulated temperature 1825 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1826 1827 This driver can also be built as a module. If so, the module will 1828 be called sbtsi_temp. 1829 1830config SENSORS_SBRMI 1831 tristate "Emulated SB-RMI sensor" 1832 depends on I2C 1833 help 1834 If you say yes here you get support for emulated RMI 1835 sensors on AMD SoCs with APML interface connected to a BMC device. 1836 1837 This driver can also be built as a module. If so, the module will 1838 be called sbrmi. 1839 1840config SENSORS_SHT15 1841 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1842 depends on GPIOLIB || COMPILE_TEST 1843 select BITREVERSE 1844 help 1845 If you say yes here you get support for the Sensiron SHT10, SHT11, 1846 SHT15, SHT71, SHT75 humidity and temperature sensors. 1847 1848 This driver can also be built as a module. If so, the module 1849 will be called sht15. 1850 1851config SENSORS_SHT21 1852 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1853 depends on I2C 1854 help 1855 If you say yes here you get support for the Sensiron SHT21, SHT25 1856 humidity and temperature sensors. 1857 1858 This driver can also be built as a module. If so, the module 1859 will be called sht21. 1860 1861config SENSORS_SHT3x 1862 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1863 depends on I2C 1864 select CRC8 1865 help 1866 If you say yes here you get support for the Sensiron SHT30 and SHT31 1867 humidity and temperature sensors. 1868 1869 This driver can also be built as a module. If so, the module 1870 will be called sht3x. 1871 1872config SENSORS_SHT4x 1873 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1874 depends on I2C 1875 select CRC8 1876 help 1877 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1878 SHT45 humidity and temperature sensors. 1879 1880 This driver can also be built as a module. If so, the module 1881 will be called sht4x. 1882 1883config SENSORS_SHTC1 1884 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1885 depends on I2C 1886 help 1887 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1888 and SHTC3 humidity and temperature sensors. 1889 1890 This driver can also be built as a module. If so, the module 1891 will be called shtc1. 1892 1893config SENSORS_SIS5595 1894 tristate "Silicon Integrated Systems Corp. SiS5595" 1895 depends on PCI && HAS_IOPORT 1896 help 1897 If you say yes here you get support for the integrated sensors in 1898 SiS5595 South Bridges. 1899 1900 This driver can also be built as a module. If so, the module 1901 will be called sis5595. 1902 1903config SENSORS_SY7636A 1904 tristate "Silergy SY7636A" 1905 depends on MFD_SY7636A 1906 help 1907 If you say yes here you get support for the thermistor readout of 1908 the Silergy SY7636A PMIC. 1909 1910 This driver can also be built as a module. If so, the module 1911 will be called sy7636a-hwmon. 1912 1913config SENSORS_DME1737 1914 tristate "SMSC DME1737, SCH311x and compatibles" 1915 depends on HAS_IOPORT 1916 depends on I2C && !PPC 1917 select HWMON_VID 1918 help 1919 If you say yes here you get support for the hardware monitoring 1920 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1921 Asus A8000 Super-I/O chips. 1922 1923 This driver can also be built as a module. If so, the module 1924 will be called dme1737. 1925 1926config SENSORS_EMC1403 1927 tristate "SMSC EMC1403/23 thermal sensor" 1928 depends on I2C 1929 select REGMAP_I2C 1930 help 1931 If you say yes here you get support for the SMSC EMC1403/23 1932 temperature monitoring chip. 1933 1934 Threshold values can be configured using sysfs. 1935 Data from the different diodes are accessible via sysfs. 1936 1937config SENSORS_EMC2103 1938 tristate "SMSC EMC2103" 1939 depends on I2C 1940 help 1941 If you say yes here you get support for the temperature 1942 and fan sensors of the SMSC EMC2103 chips. 1943 1944 This driver can also be built as a module. If so, the module 1945 will be called emc2103. 1946 1947config SENSORS_EMC2305 1948 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 1949 depends on I2C 1950 imply THERMAL 1951 help 1952 If you say yes here you get support for the Microchip EMC2305 1953 fan controller chips. 1954 The Microchip EMC2305 is a fan controller for up to 5 fans. 1955 Fan rotation speeds are reported in RPM. 1956 1957 This driver can also be built as a module. If so, the module 1958 will be called emc2305. 1959 1960config SENSORS_EMC6W201 1961 tristate "SMSC EMC6W201" 1962 depends on I2C 1963 help 1964 If you say yes here you get support for the SMSC EMC6W201 1965 hardware monitoring chip. 1966 1967 This driver can also be built as a module. If so, the module 1968 will be called emc6w201. 1969 1970config SENSORS_SMSC47M1 1971 tristate "SMSC LPC47M10x and compatibles" 1972 depends on HAS_IOPORT 1973 depends on !PPC 1974 help 1975 If you say yes here you get support for the integrated fan 1976 monitoring and control capabilities of the SMSC LPC47B27x, 1977 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 1978 LPC47M192, LPC47M292 and LPC47M997 chips. 1979 1980 The temperature and voltage sensor features of the LPC47M15x, 1981 LPC47M192, LPC47M292 and LPC47M997 are supported by another 1982 driver, select also "SMSC LPC47M192 and compatibles" below for 1983 those. 1984 1985 This driver can also be built as a module. If so, the module 1986 will be called smsc47m1. 1987 1988config SENSORS_SMSC47M192 1989 tristate "SMSC LPC47M192 and compatibles" 1990 depends on I2C 1991 select HWMON_VID 1992 help 1993 If you say yes here you get support for the temperature and 1994 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 1995 and LPC47M997 chips. 1996 1997 The fan monitoring and control capabilities of these chips 1998 are supported by another driver, select 1999 "SMSC LPC47M10x and compatibles" above. You need both drivers 2000 if you want fan control and voltage/temperature sensor support. 2001 2002 This driver can also be built as a module. If so, the module 2003 will be called smsc47m192. 2004 2005config SENSORS_SMSC47B397 2006 tristate "SMSC LPC47B397-NC" 2007 depends on HAS_IOPORT 2008 depends on !PPC 2009 help 2010 If you say yes here you get support for the SMSC LPC47B397-NC 2011 sensor chip. 2012 2013 This driver can also be built as a module. If so, the module 2014 will be called smsc47b397. 2015 2016config SENSORS_SCH56XX_COMMON 2017 tristate 2018 select REGMAP 2019 2020config SENSORS_SCH5627 2021 tristate "SMSC SCH5627" 2022 depends on HAS_IOPORT 2023 depends on !PPC && WATCHDOG 2024 select SENSORS_SCH56XX_COMMON 2025 select WATCHDOG_CORE 2026 help 2027 If you say yes here you get support for the hardware monitoring 2028 features of the SMSC SCH5627 Super-I/O chip including support for 2029 the integrated watchdog. 2030 2031 This driver can also be built as a module. If so, the module 2032 will be called sch5627. 2033 2034config SENSORS_SCH5636 2035 tristate "SMSC SCH5636" 2036 depends on HAS_IOPORT 2037 depends on !PPC && WATCHDOG 2038 select SENSORS_SCH56XX_COMMON 2039 select WATCHDOG_CORE 2040 help 2041 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 2042 hardware monitoring solutions, allowing motherboard manufacturers to 2043 create their own custom hwmon solution based upon the SCH5636. 2044 2045 Currently this driver only supports the Fujitsu Theseus SCH5636 based 2046 hwmon solution. Say yes here if you want support for the Fujitsu 2047 Theseus' hardware monitoring features including support for the 2048 integrated watchdog. 2049 2050 This driver can also be built as a module. If so, the module 2051 will be called sch5636. 2052 2053config SENSORS_STTS751 2054 tristate "ST Microelectronics STTS751" 2055 depends on I2C 2056 help 2057 If you say yes here you get support for STTS751 2058 temperature sensor chips. 2059 2060 This driver can also be built as a module. If so, the module 2061 will be called stts751. 2062 2063config SENSORS_SFCTEMP 2064 tristate "Starfive JH71x0 temperature sensor" 2065 depends on ARCH_STARFIVE || COMPILE_TEST 2066 help 2067 If you say yes here you get support for temperature sensor 2068 on the Starfive JH71x0 SoCs. 2069 2070 This driver can also be built as a module. If so, the module 2071 will be called sfctemp. 2072 2073config SENSORS_SG2042_MCU 2074 tristate "Sophgo onboard MCU support" 2075 depends on I2C 2076 depends on ARCH_SOPHGO || COMPILE_TEST 2077 help 2078 Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides 2079 power control and some basic information. 2080 2081 This driver can be built as a module. If so, the module 2082 will be called sg2042-mcu. 2083 2084config SENSORS_SURFACE_FAN 2085 tristate "Surface Fan Driver" 2086 depends on SURFACE_AGGREGATOR 2087 depends on SURFACE_AGGREGATOR_BUS 2088 help 2089 Driver that provides monitoring of the fan on Surface Pro devices that 2090 have a fan, like the Surface Pro 9. 2091 2092 This makes the fan's current speed accessible through the hwmon 2093 system. It does not provide control over the fan, the firmware is 2094 responsible for that, this driver merely provides monitoring. 2095 2096 Select M or Y here, if you want to be able to read the fan's speed. 2097 2098config SENSORS_SURFACE_TEMP 2099 tristate "Microsoft Surface Thermal Sensor Driver" 2100 depends on SURFACE_AGGREGATOR 2101 depends on SURFACE_AGGREGATOR_BUS 2102 help 2103 Driver for monitoring thermal sensors connected via the Surface 2104 Aggregator Module (embedded controller) on Microsoft Surface devices. 2105 2106 This driver can also be built as a module. If so, the module 2107 will be called surface_temp. 2108 2109config SENSORS_ADC128D818 2110 tristate "Texas Instruments ADC128D818" 2111 depends on I2C 2112 help 2113 If you say yes here you get support for the Texas Instruments 2114 ADC128D818 System Monitor with Temperature Sensor chip. 2115 2116 This driver can also be built as a module. If so, the module 2117 will be called adc128d818. 2118 2119config SENSORS_ADS7828 2120 tristate "Texas Instruments ADS7828 and compatibles" 2121 depends on I2C 2122 select REGMAP_I2C 2123 help 2124 If you say yes here you get support for Texas Instruments ADS7828 and 2125 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 2126 it is 8-bit on ADS7830. 2127 2128 This driver can also be built as a module. If so, the module 2129 will be called ads7828. 2130 2131config SENSORS_ADS7871 2132 tristate "Texas Instruments ADS7871 A/D converter" 2133 depends on SPI 2134 help 2135 If you say yes here you get support for TI ADS7871 & ADS7870 2136 2137 This driver can also be built as a module. If so, the module 2138 will be called ads7871. 2139 2140config SENSORS_AMC6821 2141 tristate "Texas Instruments AMC6821" 2142 depends on I2C 2143 select REGMAP_I2C 2144 help 2145 If you say yes here you get support for the Texas Instruments 2146 AMC6821 hardware monitoring chips. 2147 2148 This driver can also be built as a module. If so, the module 2149 will be called amc6821. 2150 2151config SENSORS_INA209 2152 tristate "TI / Burr Brown INA209" 2153 depends on I2C 2154 help 2155 If you say yes here you get support for the TI / Burr Brown INA209 2156 voltage / current / power monitor I2C interface. 2157 2158 This driver can also be built as a module. If so, the module will 2159 be called ina209. 2160 2161config SENSORS_INA2XX 2162 tristate "Texas Instruments INA219 and compatibles" 2163 depends on I2C 2164 select REGMAP_I2C 2165 help 2166 If you say yes here you get support for INA219, INA220, INA226, 2167 INA230, and INA231 power monitor chips. 2168 2169 The INA2xx driver is configured for the default configuration of 2170 the part as described in the datasheet. 2171 Default value for Rshunt is 10 mOhms. 2172 This driver can also be built as a module. If so, the module 2173 will be called ina2xx. 2174 2175config SENSORS_INA238 2176 tristate "Texas Instruments INA238" 2177 depends on I2C 2178 select REGMAP_I2C 2179 help 2180 If you say yes here you get support for the INA238 power monitor 2181 chip. This driver supports voltage, current, power and temperature 2182 measurements as well as alarm configuration. 2183 2184 This driver can also be built as a module. If so, the module 2185 will be called ina238. 2186 2187config SENSORS_INA3221 2188 tristate "Texas Instruments INA3221 Triple Power Monitor" 2189 depends on I2C 2190 select REGMAP_I2C 2191 help 2192 If you say yes here you get support for the TI INA3221 Triple Power 2193 Monitor. 2194 2195 This driver can also be built as a module. If so, the module 2196 will be called ina3221. 2197 2198config SENSORS_SPD5118 2199 tristate "SPD5118 Compliant Temperature Sensors" 2200 depends on I2C 2201 select REGMAP_I2C 2202 help 2203 If you say yes here you get support for SPD5118 (JEDEC JESD300) 2204 compliant temperature sensors. Such sensors are found on DDR5 memory 2205 modules. 2206 2207 This driver can also be built as a module. If so, the module 2208 will be called spd5118. 2209 2210config SENSORS_SPD5118_DETECT 2211 bool "Enable detect function" 2212 depends on SENSORS_SPD5118 2213 default (!DMI || !X86) 2214 help 2215 If enabled, the driver auto-detects if a chip in the SPD address 2216 range is compliant to the SPD51888 standard and auto-instantiates 2217 if that is the case. If disabled, SPD5118 compliant devices have 2218 to be instantiated by other means. On X86 systems with DMI support 2219 this will typically be done from DMI DDR detection code in the 2220 I2C SMBus subsystem. Devicetree based systems will instantiate 2221 attached devices if the DIMMs are listed in the devicetree file. 2222 2223 Disabling the detect function will speed up boot time and reduce 2224 the risk of mis-detecting SPD5118 compliant devices. However, it 2225 may result in missed DIMMs under some circumstances. 2226 2227 If unsure, say Y. 2228 2229config SENSORS_TC74 2230 tristate "Microchip TC74" 2231 depends on I2C 2232 help 2233 If you say yes here you get support for Microchip TC74 single 2234 input temperature sensor chips. 2235 2236 This driver can also be built as a module. If so, the module 2237 will be called tc74. 2238 2239config SENSORS_THMC50 2240 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2241 depends on I2C 2242 help 2243 If you say yes here you get support for Texas Instruments THMC50 2244 sensor chips and clones: the Analog Devices ADM1022. 2245 2246 This driver can also be built as a module. If so, the module 2247 will be called thmc50. 2248 2249config SENSORS_TMP102 2250 tristate "Texas Instruments TMP102" 2251 depends on I2C 2252 select REGMAP_I2C 2253 help 2254 If you say yes here you get support for Texas Instruments TMP102 2255 sensor chips. 2256 2257 This driver can also be built as a module. If so, the module 2258 will be called tmp102. 2259 2260config SENSORS_TMP103 2261 tristate "Texas Instruments TMP103" 2262 depends on I2C 2263 select REGMAP_I2C 2264 help 2265 If you say yes here you get support for Texas Instruments TMP103 2266 sensor chips. 2267 2268 This driver can also be built as a module. If so, the module 2269 will be called tmp103. 2270 2271config SENSORS_TMP108 2272 tristate "Texas Instruments TMP108" 2273 depends on I2C 2274 select REGMAP_I2C 2275 help 2276 If you say yes here you get support for Texas Instruments TMP108 2277 sensor chips. 2278 2279 This driver can also be built as a module. If so, the module 2280 will be called tmp108. 2281 2282config SENSORS_TMP401 2283 tristate "Texas Instruments TMP401 and compatibles" 2284 depends on I2C 2285 select REGMAP 2286 help 2287 If you say yes here you get support for Texas Instruments TMP401, 2288 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2289 2290 This driver can also be built as a module. If so, the module 2291 will be called tmp401. 2292 2293config SENSORS_TMP421 2294 tristate "Texas Instruments TMP421 and compatible" 2295 depends on I2C 2296 help 2297 If you say yes here you get support for Texas Instruments TMP421, 2298 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2299 2300 This driver can also be built as a module. If so, the module 2301 will be called tmp421. 2302 2303config SENSORS_TMP464 2304 tristate "Texas Instruments TMP464 and compatible" 2305 depends on I2C 2306 select REGMAP_I2C 2307 help 2308 If you say yes here you get support for Texas Instruments TMP464 2309 and TMP468 temperature sensor chips. 2310 2311 This driver can also be built as a module. If so, the module 2312 will be called tmp464. 2313 2314config SENSORS_TMP513 2315 tristate "Texas Instruments TMP513 and compatibles" 2316 depends on I2C 2317 select REGMAP_I2C 2318 help 2319 If you say yes here you get support for Texas Instruments TMP512, 2320 and TMP513 temperature and power supply sensor chips. 2321 2322 This driver can also be built as a module. If so, the module 2323 will be called tmp513. 2324 2325config SENSORS_VEXPRESS 2326 tristate "Versatile Express" 2327 depends on VEXPRESS_CONFIG 2328 help 2329 This driver provides support for hardware sensors available on 2330 the ARM Ltd's Versatile Express platform. It can provide wide 2331 range of information like temperature, power, energy. 2332 2333config SENSORS_VIA_CPUTEMP 2334 tristate "VIA CPU temperature sensor" 2335 depends on X86 2336 select HWMON_VID 2337 help 2338 If you say yes here you get support for the temperature 2339 sensor inside your CPU. Supported are all known variants of 2340 the VIA C7 and Nano. 2341 2342config SENSORS_VIA686A 2343 tristate "VIA686A" 2344 depends on PCI && HAS_IOPORT 2345 help 2346 If you say yes here you get support for the integrated sensors in 2347 Via 686A/B South Bridges. 2348 2349 This driver can also be built as a module. If so, the module 2350 will be called via686a. 2351 2352config SENSORS_VT1211 2353 tristate "VIA VT1211" 2354 depends on HAS_IOPORT 2355 depends on !PPC 2356 select HWMON_VID 2357 help 2358 If you say yes here then you get support for hardware monitoring 2359 features of the VIA VT1211 Super-I/O chip. 2360 2361 This driver can also be built as a module. If so, the module 2362 will be called vt1211. 2363 2364config SENSORS_VT8231 2365 tristate "VIA VT8231" 2366 depends on PCI && HAS_IOPORT 2367 select HWMON_VID 2368 help 2369 If you say yes here then you get support for the integrated sensors 2370 in the VIA VT8231 device. 2371 2372 This driver can also be built as a module. If so, the module 2373 will be called vt8231. 2374 2375config SENSORS_W83773G 2376 tristate "Nuvoton W83773G" 2377 depends on I2C 2378 select REGMAP_I2C 2379 help 2380 If you say yes here you get support for the Nuvoton W83773G hardware 2381 monitoring chip. 2382 2383 This driver can also be built as a module. If so, the module 2384 will be called w83773g. 2385 2386config SENSORS_W83781D 2387 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2388 depends on I2C 2389 select HWMON_VID 2390 help 2391 If you say yes here you get support for the Winbond W8378x series 2392 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2393 Asus AS99127F. 2394 2395 This driver can also be built as a module. If so, the module 2396 will be called w83781d. 2397 2398config SENSORS_W83791D 2399 tristate "Winbond W83791D" 2400 depends on I2C 2401 select HWMON_VID 2402 help 2403 If you say yes here you get support for the Winbond W83791D chip. 2404 2405 This driver can also be built as a module. If so, the module 2406 will be called w83791d. 2407 2408config SENSORS_W83792D 2409 tristate "Winbond W83792D" 2410 depends on I2C 2411 help 2412 If you say yes here you get support for the Winbond W83792D chip. 2413 2414 This driver can also be built as a module. If so, the module 2415 will be called w83792d. 2416 2417config SENSORS_W83793 2418 tristate "Winbond W83793" 2419 depends on I2C 2420 select HWMON_VID 2421 help 2422 If you say yes here you get support for the Winbond W83793 2423 hardware monitoring chip, including support for the integrated 2424 watchdog. 2425 2426 This driver can also be built as a module. If so, the module 2427 will be called w83793. 2428 2429config SENSORS_W83795 2430 tristate "Winbond/Nuvoton W83795G/ADG" 2431 depends on I2C 2432 help 2433 If you say yes here you get support for the Winbond W83795G and 2434 W83795ADG hardware monitoring chip, including manual fan speed 2435 control. 2436 2437 This driver can also be built as a module. If so, the module 2438 will be called w83795. 2439 2440config SENSORS_W83795_FANCTRL 2441 bool "Include automatic fan control support" 2442 depends on SENSORS_W83795 2443 help 2444 If you say yes here, support for automatic fan speed control 2445 will be included in the driver. 2446 2447 Please also note that this option will create sysfs attribute 2448 files which may change in the future, so you shouldn't rely 2449 on them being stable. 2450 2451config SENSORS_W83L785TS 2452 tristate "Winbond W83L785TS-S" 2453 depends on I2C 2454 help 2455 If you say yes here you get support for the Winbond W83L785TS-S 2456 sensor chip, which is used on the Asus A7N8X, among other 2457 motherboards. 2458 2459 This driver can also be built as a module. If so, the module 2460 will be called w83l785ts. 2461 2462config SENSORS_W83L786NG 2463 tristate "Winbond W83L786NG, W83L786NR" 2464 depends on I2C 2465 help 2466 If you say yes here you get support for the Winbond W83L786NG 2467 and W83L786NR sensor chips. 2468 2469 This driver can also be built as a module. If so, the module 2470 will be called w83l786ng. 2471 2472config SENSORS_W83627HF 2473 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2474 depends on HAS_IOPORT 2475 depends on !PPC 2476 select HWMON_VID 2477 help 2478 If you say yes here you get support for the Winbond W836X7 series 2479 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2480 W83697HF. 2481 2482 This driver can also be built as a module. If so, the module 2483 will be called w83627hf. 2484 2485config SENSORS_W83627EHF 2486 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2487 depends on HAS_IOPORT 2488 depends on !PPC 2489 select HWMON_VID 2490 help 2491 If you say yes here you get support for the hardware 2492 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2493 2494 This driver also supports the W83627EHG, which is the lead-free 2495 version of the W83627EHF, and the W83627DHG, which is a similar 2496 chip suited for specific Intel processors that use PECI such as 2497 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2498 version of the W83627DHG (as far as hardware monitoring goes.) 2499 2500 This driver also supports Nuvoton W83667HG and W83667HG-B. 2501 2502 This driver can also be built as a module. If so, the module 2503 will be called w83627ehf. 2504 2505config SENSORS_WM831X 2506 tristate "WM831x PMICs" 2507 depends on MFD_WM831X 2508 help 2509 If you say yes here you get support for the hardware 2510 monitoring functionality of the Wolfson Microelectronics 2511 WM831x series of PMICs. 2512 2513 This driver can also be built as a module. If so, the module 2514 will be called wm831x-hwmon. 2515 2516config SENSORS_WM8350 2517 tristate "Wolfson Microelectronics WM835x" 2518 depends on MFD_WM8350 2519 help 2520 If you say yes here you get support for the hardware 2521 monitoring features of the WM835x series of PMICs. 2522 2523 This driver can also be built as a module. If so, the module 2524 will be called wm8350-hwmon. 2525 2526config SENSORS_ULTRA45 2527 tristate "Sun Ultra45 PIC16F747" 2528 depends on SPARC64 2529 help 2530 This driver provides support for the Ultra45 workstation environmental 2531 sensors. 2532 2533config SENSORS_XGENE 2534 tristate "APM X-Gene SoC hardware monitoring driver" 2535 depends on XGENE_SLIMPRO_MBOX || PCC 2536 help 2537 If you say yes here you get support for the temperature 2538 and power sensors for APM X-Gene SoC. 2539 2540config SENSORS_INTEL_M10_BMC_HWMON 2541 tristate "Intel MAX10 BMC Hardware Monitoring" 2542 depends on MFD_INTEL_M10_BMC_CORE 2543 help 2544 This driver provides support for the hardware monitoring functionality 2545 on Intel MAX10 BMC chip. 2546 2547 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2548 sensors monitor various telemetry data of different components on the 2549 card, e.g. board temperature, FPGA core temperature/voltage/current. 2550 2551if ACPI 2552 2553comment "ACPI drivers" 2554 2555config SENSORS_ACPI_POWER 2556 tristate "ACPI 4.0 power meter" 2557 help 2558 This driver exposes ACPI 4.0 power meters as hardware monitoring 2559 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2560 and a power meter. 2561 2562 To compile this driver as a module, choose M here: 2563 the module will be called acpi_power_meter. 2564 2565config SENSORS_ATK0110 2566 tristate "ASUS ATK0110" 2567 depends on X86 2568 help 2569 If you say yes here you get support for the ACPI hardware 2570 monitoring interface found in many ASUS motherboards. This 2571 driver will provide readings of fans, voltages and temperatures 2572 through the system firmware. 2573 2574 This driver can also be built as a module. If so, the module 2575 will be called asus_atk0110. 2576 2577config SENSORS_ASUS_WMI 2578 tristate "ASUS WMI X370/X470/B450/X399" 2579 depends on ACPI_WMI 2580 help 2581 If you say yes here you get support for the ACPI hardware monitoring 2582 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2583 will provide readings of fans, voltages and temperatures through the system 2584 firmware. 2585 2586 This driver can also be built as a module. If so, the module 2587 will be called asus_wmi_sensors. 2588 2589config SENSORS_ASUS_EC 2590 tristate "ASUS EC Sensors" 2591 depends on X86 2592 help 2593 If you say yes here you get support for the ACPI embedded controller 2594 hardware monitoring interface found in ASUS motherboards. The driver 2595 currently supports B550/X570 boards, although other ASUS boards might 2596 provide this monitoring interface as well. 2597 2598 This driver can also be built as a module. If so, the module 2599 will be called asus_ec_sensors. 2600 2601config SENSORS_HP_WMI 2602 tristate "HP WMI Sensors" 2603 depends on ACPI_WMI 2604 help 2605 If you say yes here you get support for the ACPI hardware monitoring 2606 interface found in HP (and some HP Compaq) business-class computers. 2607 Available sensors vary between systems. Temperature and fan speed 2608 sensors are the most common. 2609 2610 This driver can also be built as a module. If so, the module 2611 will be called hp_wmi_sensors. 2612 2613endif # ACPI 2614 2615endif # HWMON 2616