1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Hardware monitoring chip drivers configuration 4# 5 6menuconfig HWMON 7 tristate "Hardware Monitoring support" 8 depends on HAS_IOMEM 9 default y 10 help 11 Hardware monitoring devices let you monitor the hardware health 12 of a system. Most modern motherboards include such a device. It 13 can include temperature sensors, voltage sensors, fan speed 14 sensors and various additional features such as the ability to 15 control the speed of the fans. If you want this support you 16 should say Y here and also to the specific driver(s) for your 17 sensors chip(s) below. 18 19 To find out which specific driver(s) you need, use the 20 sensors-detect script from the lm_sensors package. Read 21 <file:Documentation/hwmon/userspace-tools.rst> for details. 22 23 This support can also be built as a module. If so, the module 24 will be called hwmon. 25 26if HWMON 27 28config HWMON_VID 29 tristate 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 help 34 Say Y here if you want the I2C chip drivers to produce a bunch of 35 debug messages to the system log. Select this if you are having 36 a problem with I2C support and want to see more of what is going 37 on. 38 39comment "Native drivers" 40 41config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108config SENSORS_ADM1025 109 tristate "Analog Devices ADM1025 and compatibles" 110 depends on I2C 111 select HWMON_VID 112 help 113 If you say yes here you get support for Analog Devices ADM1025 114 and Philips NE1619 sensor chips. 115 116 This driver can also be built as a module. If so, the module 117 will be called adm1025. 118 119config SENSORS_ADM1026 120 tristate "Analog Devices ADM1026 and compatibles" 121 depends on I2C 122 select HWMON_VID 123 help 124 If you say yes here you get support for Analog Devices ADM1026 125 sensor chip. 126 127 This driver can also be built as a module. If so, the module 128 will be called adm1026. 129 130config SENSORS_ADM1029 131 tristate "Analog Devices ADM1029" 132 depends on I2C 133 help 134 If you say yes here you get support for Analog Devices ADM1029 135 sensor chip. 136 Very rare chip, please let us know you use it. 137 138 This driver can also be built as a module. If so, the module 139 will be called adm1029. 140 141config SENSORS_ADM1031 142 tristate "Analog Devices ADM1031 and compatibles" 143 depends on I2C 144 help 145 If you say yes here you get support for Analog Devices ADM1031 146 and ADM1030 sensor chips. 147 148 This driver can also be built as a module. If so, the module 149 will be called adm1031. 150 151config SENSORS_ADM1177 152 tristate "Analog Devices ADM1177 and compatibles" 153 depends on I2C 154 help 155 If you say yes here you get support for Analog Devices ADM1177 156 sensor chips. 157 158 This driver can also be built as a module. If so, the module 159 will be called adm1177. 160 161config SENSORS_ADM9240 162 tristate "Analog Devices ADM9240 and compatibles" 163 depends on I2C 164 select HWMON_VID 165 select REGMAP_I2C 166 help 167 If you say yes here you get support for Analog Devices ADM9240, 168 Dallas DS1780, National Semiconductor LM81 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm9240. 172 173config SENSORS_ADT7X10 174 tristate 175 select REGMAP 176 help 177 This module contains common code shared by the ADT7310/ADT7320 and 178 ADT7410/ADT7420 temperature monitoring chip drivers. 179 180 If built as a module, the module will be called adt7x10. 181 182config SENSORS_ADT7310 183 tristate "Analog Devices ADT7310/ADT7320" 184 depends on SPI_MASTER 185 select SENSORS_ADT7X10 186 help 187 If you say yes here you get support for the Analog Devices 188 ADT7310 and ADT7320 temperature monitoring chips. 189 190 This driver can also be built as a module. If so, the module 191 will be called adt7310. 192 193config SENSORS_ADT7410 194 tristate "Analog Devices ADT7410/ADT7420" 195 depends on I2C 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7410 and ADT7420 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7410. 203 204config SENSORS_ADT7411 205 tristate "Analog Devices ADT7411" 206 depends on I2C 207 help 208 If you say yes here you get support for the Analog Devices 209 ADT7411 voltage and temperature monitoring chip. 210 211 This driver can also be built as a module. If so, the module 212 will be called adt7411. 213 214config SENSORS_ADT7462 215 tristate "Analog Devices ADT7462" 216 depends on I2C 217 help 218 If you say yes here you get support for the Analog Devices 219 ADT7462 temperature monitoring chips. 220 221 This driver can also be built as a module. If so, the module 222 will be called adt7462. 223 224config SENSORS_ADT7470 225 tristate "Analog Devices ADT7470" 226 depends on I2C 227 select REGMAP_I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7470 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7470. 234 235config SENSORS_ADT7475 236 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 237 depends on I2C 238 select HWMON_VID 239 help 240 If you say yes here you get support for the Analog Devices 241 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 242 chips. 243 244 This driver can also be built as a module. If so, the module 245 will be called adt7475. 246 247config SENSORS_AHT10 248 tristate "Aosong AHT10, AHT20" 249 depends on I2C 250 select CRC8 251 help 252 If you say yes here, you get support for the Aosong AHT10 and AHT20 253 temperature and humidity sensors 254 255 This driver can also be built as a module. If so, the module 256 will be called aht10. 257 258config SENSORS_AQUACOMPUTER_D5NEXT 259 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 260 depends on USB_HID 261 select CRC16 262 help 263 If you say yes here you get support for sensors and fans of 264 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 265 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 266 Next sensor, where available. 267 268 This driver can also be built as a module. If so, the module 269 will be called aquacomputer_d5next. 270 271config SENSORS_AS370 272 tristate "Synaptics AS370 SoC hardware monitoring driver" 273 help 274 If you say yes here you get support for the PVT sensors of 275 the Synaptics AS370 SoC 276 277 This driver can also be built as a module. If so, the module 278 will be called as370-hwmon. 279 280 281config SENSORS_ASC7621 282 tristate "Andigilog aSC7621" 283 depends on I2C 284 help 285 If you say yes here you get support for the aSC7621 286 family of SMBus sensors chip found on most Intel X38, X48, X58, 287 945, 965 and 975 desktop boards. Currently supported chips: 288 aSC7621 289 aSC7621a 290 291 This driver can also be built as a module. If so, the module 292 will be called asc7621. 293 294config SENSORS_ASUS_ROG_RYUJIN 295 tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver" 296 depends on HID 297 help 298 If you say yes here you get support for the fans and sensors of 299 the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler. 300 301 This driver can also be built as a module. If so, the module 302 will be called asus_rog_ryujin. 303 304config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NODE 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338config SENSORS_FAM15H_POWER 339 tristate "AMD Family 15h processor power" 340 depends on X86 && PCI && CPU_SUP_AMD 341 help 342 If you say yes here you get support for processor power 343 information of your AMD family 15h CPU. 344 345 This driver can also be built as a module. If so, the module 346 will be called fam15h_power. 347 348config SENSORS_APPLESMC 349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 350 depends on INPUT && X86 351 select NEW_LEDS 352 select LEDS_CLASS 353 help 354 This driver provides support for the Apple System Management 355 Controller, which provides an accelerometer (Apple Sudden Motion 356 Sensor), light sensors, temperature sensors, keyboard backlight 357 control and fan control. 358 359 Only Intel-based Apple's computers are supported (MacBook Pro, 360 MacBook, MacMini). 361 362 Data from the different sensors, keyboard backlight control and fan 363 control are accessible via sysfs. 364 365 This driver also provides an absolute input class device, allowing 366 the laptop to act as a pinball machine-esque joystick. 367 368 Say Y here if you have an applicable laptop and want to experience 369 the awesome power of applesmc. 370 371config SENSORS_ARM_SCMI 372 tristate "ARM SCMI Sensors" 373 depends on ARM_SCMI_PROTOCOL 374 depends on THERMAL || !THERMAL_OF 375 help 376 This driver provides support for temperature, voltage, current 377 and power sensors available on SCMI based platforms. The actual 378 number and type of sensors exported depend on the platform. 379 380 This driver can also be built as a module. If so, the module 381 will be called scmi-hwmon. 382 383config SENSORS_ARM_SCPI 384 tristate "ARM SCPI Sensors" 385 depends on ARM_SCPI_PROTOCOL 386 depends on THERMAL || !THERMAL_OF 387 help 388 This driver provides support for temperature, voltage, current 389 and power sensors available on ARM Ltd's SCP based platforms. The 390 actual number and type of sensors exported depend on the platform. 391 392config SENSORS_ASB100 393 tristate "Asus ASB100 Bach" 394 depends on (X86 || COMPILE_TEST) && I2C 395 select HWMON_VID 396 help 397 If you say yes here you get support for the ASB100 Bach sensor 398 chip found on some Asus mainboards. 399 400 This driver can also be built as a module. If so, the module 401 will be called asb100. 402 403config SENSORS_ASPEED 404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 405 depends on ARCH_ASPEED || COMPILE_TEST 406 depends on THERMAL || THERMAL=n 407 select REGMAP 408 help 409 This driver provides support for ASPEED AST2400/AST2500 PWM 410 and Fan Tacho controllers. 411 412 This driver can also be built as a module. If so, the module 413 will be called aspeed_pwm_tacho. 414 415config SENSORS_ASPEED_G6 416 tristate "ASPEED G6 PWM and Fan tach driver" 417 depends on ARCH_ASPEED || COMPILE_TEST 418 depends on PWM 419 help 420 This driver provides support for ASPEED G6 PWM and Fan Tach 421 controllers. 422 423 This driver can also be built as a module. If so, the module 424 will be called aspeed_g6_pwm_tach. 425 426config SENSORS_ATXP1 427 tristate "Attansic ATXP1 VID controller" 428 depends on I2C 429 select HWMON_VID 430 help 431 If you say yes here you get support for the Attansic ATXP1 VID 432 controller. 433 434 If your board have such a chip, you are able to control your CPU 435 core and other voltages. 436 437 This driver can also be built as a module. If so, the module 438 will be called atxp1. 439 440config SENSORS_BT1_PVT 441 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 442 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 443 select POLYNOMIAL 444 help 445 If you say yes here you get support for Baikal-T1 PVT sensor 446 embedded into the SoC. 447 448 This driver can also be built as a module. If so, the module will be 449 called bt1-pvt. 450 451config SENSORS_BT1_PVT_ALARMS 452 bool "Enable Baikal-T1 PVT sensor alarms" 453 depends on SENSORS_BT1_PVT 454 help 455 Baikal-T1 PVT IP-block provides threshold registers for each 456 supported sensor. But the corresponding interrupts might be 457 generated by the thresholds comparator only in synchronization with 458 a data conversion. Additionally there is only one sensor data can 459 be converted at a time. All of these makes the interface impossible 460 to be used for the hwmon alarms implementation without periodic 461 switch between the PVT sensors. By default the data conversion is 462 performed on demand from the user-space. If this config is enabled 463 the data conversion will be periodically performed and the data will be 464 saved in the internal driver cache. 465 466config SENSORS_CGBC 467 tristate "Congatec Board Controller Sensors" 468 depends on MFD_CGBC 469 help 470 Enable sensors support for the Congatec Board Controller. It has 471 temperature, voltage, current and fan sensors. 472 473 This driver can also be built as a module. If so, the module will be 474 called cgbc-hwmon. 475 476config SENSORS_CHIPCAP2 477 tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" 478 depends on I2C 479 help 480 Say yes here to build support for the Amphenol ChipCap 2 481 relative humidity and temperature sensor. 482 483 To compile this driver as a module, choose M here: the module 484 will be called chipcap2. 485 486config SENSORS_CORSAIR_CPRO 487 tristate "Corsair Commander Pro controller" 488 depends on HID 489 help 490 If you say yes here you get support for the Corsair Commander Pro 491 controller. 492 493 This driver can also be built as a module. If so, the module 494 will be called corsair-cpro. 495 496config SENSORS_CORSAIR_PSU 497 tristate "Corsair PSU HID controller" 498 depends on HID 499 help 500 If you say yes here you get support for Corsair PSUs with a HID 501 interface. 502 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 503 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 504 by Corsair. 505 506 This driver can also be built as a module. If so, the module 507 will be called corsair-psu. 508 509config SENSORS_CROS_EC 510 tristate "ChromeOS Embedded Controller sensors" 511 depends on MFD_CROS_EC_DEV 512 default MFD_CROS_EC_DEV 513 help 514 If you say yes here you get support for ChromeOS Embedded Controller 515 sensors. 516 517 This driver can also be built as a module. If so, the module 518 will be called cros_ec_hwmon. 519 520config SENSORS_DRIVETEMP 521 tristate "Hard disk drives with temperature sensors" 522 depends on SCSI && ATA 523 help 524 If you say yes you get support for the temperature sensor on 525 hard disk drives. 526 527 This driver can also be built as a module. If so, the module 528 will be called drivetemp. 529 530config SENSORS_DS620 531 tristate "Dallas Semiconductor DS620" 532 depends on I2C 533 help 534 If you say yes here you get support for Dallas Semiconductor 535 DS620 sensor chip. 536 537 This driver can also be built as a module. If so, the module 538 will be called ds620. 539 540config SENSORS_DS1621 541 tristate "Dallas Semiconductor DS1621 and compatibles" 542 depends on I2C 543 help 544 If you say yes here you get support for Dallas Semiconductor/Maxim 545 Integrated DS1621 sensor chips and compatible models including: 546 547 - Dallas Semiconductor DS1625 548 - Maxim Integrated DS1631 549 - Maxim Integrated DS1721 550 - Maxim Integrated DS1731 551 552 This driver can also be built as a module. If so, the module 553 will be called ds1621. 554 555config SENSORS_DELL_SMM 556 tristate "Dell laptop SMM BIOS hwmon driver" 557 depends on ACPI_WMI 558 depends on X86 559 imply THERMAL 560 help 561 This hwmon driver adds support for reporting temperature of different 562 sensors and controls the fans on Dell laptops via System Management 563 Mode provided by Dell BIOS. 564 565 When option I8K is also enabled this driver provides legacy /proc/i8k 566 userspace interface for i8kutils package. 567 568config I8K 569 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 570 depends on SENSORS_DELL_SMM 571 depends on PROC_FS 572 help 573 This option enables the legacy /proc/i8k userspace interface of the 574 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 575 version, temperatures and allows control of fan speeds of some Dell 576 laptops. Sometimes it also reports power and hotkey status. 577 578 This interface is required to run programs from the i8kutils package. 579 580 Say Y if you intend to run userspace programs that use this interface. 581 Say N otherwise. 582 583config SENSORS_DA9052_ADC 584 tristate "Dialog DA9052/DA9053 ADC" 585 depends on PMIC_DA9052 586 help 587 Say y here to support the ADC found on Dialog Semiconductor 588 DA9052-BC and DA9053-AA/Bx PMICs. 589 590 This driver can also be built as module. If so, the module 591 will be called da9052-hwmon. 592 593config SENSORS_DA9055 594 tristate "Dialog Semiconductor DA9055 ADC" 595 depends on MFD_DA9055 596 help 597 If you say yes here you get support for ADC on the Dialog 598 Semiconductor DA9055 PMIC. 599 600 This driver can also be built as a module. If so, the module 601 will be called da9055-hwmon. 602 603config SENSORS_I5K_AMB 604 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 605 depends on PCI 606 help 607 If you say yes here you get support for FB-DIMM AMB temperature 608 monitoring chips on systems with the Intel 5000 series chipset. 609 610 This driver can also be built as a module. If so, the module 611 will be called i5k_amb. 612 613config SENSORS_SPARX5 614 tristate "Sparx5 SoC temperature sensor" 615 depends on ARCH_SPARX5 || COMPILE_TEST 616 help 617 If you say yes here you get support for temperature monitoring 618 with the Microchip Sparx5 SoC. 619 620 This driver can also be built as a module. If so, the module 621 will be called sparx5-temp. 622 623config SENSORS_F71805F 624 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 625 depends on HAS_IOPORT 626 depends on !PPC 627 help 628 If you say yes here you get support for hardware monitoring 629 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 630 Super-I/O chips. 631 632 This driver can also be built as a module. If so, the module 633 will be called f71805f. 634 635config SENSORS_F71882FG 636 tristate "Fintek F71882FG and compatibles" 637 depends on HAS_IOPORT 638 depends on !PPC 639 help 640 If you say yes here you get support for hardware monitoring 641 features of many Fintek Super-I/O (LPC) chips. The currently 642 supported chips are: 643 F71808E/A 644 F71858FG 645 F71862FG 646 F71863FG 647 F71869F/E/A 648 F71882FG 649 F71883FG 650 F71889FG/ED/A 651 F8000 652 F81801U 653 F81865F 654 655 This driver can also be built as a module. If so, the module 656 will be called f71882fg. 657 658config SENSORS_F75375S 659 tristate "Fintek F75375S/SP, F75373 and F75387" 660 depends on I2C 661 help 662 If you say yes here you get support for hardware monitoring 663 features of the Fintek F75375S/SP, F75373 and F75387 664 665 This driver can also be built as a module. If so, the module 666 will be called f75375s. 667 668config SENSORS_GSC 669 tristate "Gateworks System Controller ADC" 670 depends on MFD_GATEWORKS_GSC 671 help 672 Support for the Gateworks System Controller A/D converters. 673 674 To compile this driver as a module, choose M here: 675 the module will be called gsc-hwmon. 676 677config SENSORS_MC13783_ADC 678 tristate "Freescale MC13783/MC13892 ADC" 679 depends on MFD_MC13XXX 680 help 681 Support for the A/D converter on MC13783 and MC13892 PMIC. 682 683config SENSORS_FSCHMD 684 tristate "Fujitsu Siemens Computers sensor chips" 685 depends on (X86 || COMPILE_TEST) && I2C 686 help 687 If you say yes here you get support for the following Fujitsu 688 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 689 Heimdall, Heracles, Hades and Syleus including support for the 690 integrated watchdog. 691 692 This is a merged driver for FSC sensor chips replacing the fscpos, 693 fscscy and fscher drivers and adding support for several other FSC 694 sensor chips. 695 696 This driver can also be built as a module. If so, the module 697 will be called fschmd. 698 699config SENSORS_FTSTEUTATES 700 tristate "Fujitsu Technology Solutions sensor chip Teutates" 701 depends on I2C && WATCHDOG 702 select WATCHDOG_CORE 703 help 704 If you say yes here you get support for the Fujitsu Technology 705 Solutions (FTS) sensor chip "Teutates" including support for 706 the integrated watchdog. 707 708 This driver can also be built as a module. If so, the module 709 will be called ftsteutates. 710 711config SENSORS_GIGABYTE_WATERFORCE 712 tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" 713 depends on USB_HID 714 help 715 If you say yes here you get support for hardware monitoring for the 716 Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. 717 718 This driver can also be built as a module. If so, the module 719 will be called gigabyte_waterforce. 720 721config SENSORS_GL518SM 722 tristate "Genesys Logic GL518SM" 723 depends on I2C 724 help 725 If you say yes here you get support for Genesys Logic GL518SM 726 sensor chips. 727 728 This driver can also be built as a module. If so, the module 729 will be called gl518sm. 730 731config SENSORS_GL520SM 732 tristate "Genesys Logic GL520SM" 733 depends on I2C 734 select HWMON_VID 735 help 736 If you say yes here you get support for Genesys Logic GL520SM 737 sensor chips. 738 739 This driver can also be built as a module. If so, the module 740 will be called gl520sm. 741 742config SENSORS_G760A 743 tristate "GMT G760A" 744 depends on I2C 745 help 746 If you say yes here you get support for Global Mixed-mode 747 Technology Inc G760A fan speed PWM controller chips. 748 749 This driver can also be built as a module. If so, the module 750 will be called g760a. 751 752config SENSORS_G762 753 tristate "GMT G762 and G763" 754 depends on I2C 755 help 756 If you say yes here you get support for Global Mixed-mode 757 Technology Inc G762 and G763 fan speed PWM controller chips. 758 759 This driver can also be built as a module. If so, the module 760 will be called g762. 761 762config SENSORS_GPIO_FAN 763 tristate "GPIO fan" 764 depends on OF_GPIO 765 depends on GPIOLIB || COMPILE_TEST 766 depends on THERMAL || THERMAL=n 767 help 768 If you say yes here you get support for fans connected to GPIO lines. 769 770 This driver can also be built as a module. If so, the module 771 will be called gpio-fan. 772 773config SENSORS_GXP_FAN_CTRL 774 tristate "HPE GXP fan controller" 775 depends on ARCH_HPE_GXP || COMPILE_TEST 776 help 777 If you say yes here you get support for GXP fan control functionality. 778 779 The GXP controls fan function via the CPLD through the use of PWM 780 registers. This driver reports status and pwm setting of the fans. 781 782config SENSORS_HIH6130 783 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 784 depends on I2C 785 help 786 If you say yes here you get support for Honeywell Humidicon 787 HIH-6130 and HIH-6131 Humidicon humidity sensors. 788 789 This driver can also be built as a module. If so, the module 790 will be called hih6130. 791 792config SENSORS_HS3001 793 tristate "Renesas HS3001 humidity and temperature sensors" 794 depends on I2C 795 help 796 If you say yes here you get support for the Renesas HS3001, 797 to HS3004 humidity and temperature sensors. 798 799 This driver can also be built as a module. If so, the module 800 will be called hs3001. 801 802config SENSORS_IBMAEM 803 tristate "IBM Active Energy Manager temperature/power sensors and control" 804 select IPMI_SI 805 depends on IPMI_HANDLER 806 help 807 If you say yes here you get support for the temperature and 808 power sensors and capping hardware in various IBM System X 809 servers that support Active Energy Manager. This includes 810 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 811 and certain HC10/HS2x/LS2x/QS2x blades. 812 813 This driver can also be built as a module. If so, the module 814 will be called ibmaem. 815 816config SENSORS_IBMPEX 817 tristate "IBM PowerExecutive temperature/power sensors" 818 select IPMI_SI 819 depends on IPMI_HANDLER 820 help 821 If you say yes here you get support for the temperature and 822 power sensors in various IBM System X servers that support 823 PowerExecutive. So far this includes the x3350, x3550, x3650, 824 x3655, and x3755; the x3800, x3850, and x3950 models that have 825 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 826 827 This driver can also be built as a module. If so, the module 828 will be called ibmpex. 829 830config SENSORS_IBMPOWERNV 831 tristate "IBM POWERNV platform sensors" 832 depends on PPC_POWERNV 833 default y 834 help 835 If you say yes here you get support for the temperature/fan/power 836 sensors on your PowerNV platform. 837 838 This driver can also be built as a module. If so, the module 839 will be called ibmpowernv. 840 841config SENSORS_IIO_HWMON 842 tristate "Hwmon driver that uses channels specified via iio maps" 843 depends on IIO 844 help 845 This is a platform driver that in combination with a suitable 846 map allows IIO devices to provide basic hwmon functionality 847 for those channels specified in the map. This map can be provided 848 either via platform data or the device tree bindings. 849 850config SENSORS_I5500 851 tristate "Intel 5500/5520/X58 temperature sensor" 852 depends on X86 && PCI 853 help 854 If you say yes here you get support for the temperature 855 sensor inside the Intel 5500, 5520 and X58 chipsets. 856 857 This driver can also be built as a module. If so, the module 858 will be called i5500_temp. 859 860config SENSORS_CORETEMP 861 tristate "Intel Core/Core2/Atom temperature sensor" 862 depends on X86 863 help 864 If you say yes here you get support for the temperature 865 sensor inside your CPU. Most of the family 6 CPUs 866 are supported. Check Documentation/hwmon/coretemp.rst for details. 867 868config SENSORS_ISL28022 869 tristate "Renesas ISL28022" 870 depends on I2C 871 select REGMAP_I2C 872 help 873 If you say yes here you get support for ISL28022 power monitor. 874 Check Documentation/hwmon/isl28022.rst for details. 875 876 This driver can also be built as a module. If so, the module 877 will be called isl28022. 878 879config SENSORS_IT87 880 tristate "ITE IT87xx and compatibles" 881 depends on HAS_IOPORT 882 depends on !PPC 883 select HWMON_VID 884 help 885 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 886 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 887 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 888 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 889 clone. 890 891 This driver can also be built as a module. If so, the module 892 will be called it87. 893 894config SENSORS_JC42 895 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 896 depends on I2C 897 select REGMAP_I2C 898 help 899 If you say yes here, you get support for JEDEC JC42.4 compliant 900 temperature sensors, which are used on many DDR3 memory modules for 901 mobile devices and servers. Support will include, but not be limited 902 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 903 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 904 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 905 906 This driver can also be built as a module. If so, the module 907 will be called jc42. 908 909config SENSORS_POWERZ 910 tristate "ChargerLAB POWER-Z USB-C tester" 911 depends on USB 912 help 913 If you say yes here you get support for ChargerLAB POWER-Z series of 914 USB-C charging testers. 915 916 This driver can also be built as a module. If so, the module 917 will be called powerz. 918 919config SENSORS_POWR1220 920 tristate "Lattice POWR1220 Power Monitoring" 921 depends on I2C 922 help 923 If you say yes here you get access to the hardware monitoring 924 functions of the Lattice POWR1220 isp Power Supply Monitoring, 925 Sequencing and Margining Controller. 926 927 This driver can also be built as a module. If so, the module 928 will be called powr1220. 929 930config SENSORS_LAN966X 931 tristate "Microchip LAN966x Hardware Monitoring" 932 depends on SOC_LAN966 || COMPILE_TEST 933 select REGMAP 934 select POLYNOMIAL 935 help 936 If you say yes here you get support for temperature monitoring 937 on the Microchip LAN966x SoC. 938 939 This driver can also be built as a module. If so, the module 940 will be called lan966x-hwmon. 941 942config SENSORS_LENOVO_EC 943 tristate "Sensor reader for Lenovo ThinkStations" 944 depends on X86 945 help 946 If you say yes here you get support for LENOVO 947 EC Sensor data on newer ThinkStation systems 948 949 This driver can also be built as a module. If so, the module 950 will be called lenovo_ec_sensors. 951 952config SENSORS_LINEAGE 953 tristate "Lineage Compact Power Line Power Entry Module" 954 depends on I2C 955 help 956 If you say yes here you get support for the Lineage Compact Power Line 957 series of DC/DC and AC/DC converters such as CP1800, CP2000AC, 958 CP2000DC, CP2725, and others. 959 960 This driver can also be built as a module. If so, the module 961 will be called lineage-pem. 962 963config SENSORS_LOCHNAGAR 964 tristate "Lochnagar Hardware Monitor" 965 depends on MFD_LOCHNAGAR 966 help 967 If you say yes here you get support for Lochnagar 2 temperature, 968 voltage and current sensors abilities. 969 970 This driver can also be built as a module. If so, the module 971 will be called lochnagar-hwmon. 972 973config SENSORS_LTC2945 974 tristate "Linear Technology LTC2945" 975 depends on I2C 976 select REGMAP_I2C 977 help 978 If you say yes here you get support for Linear Technology LTC2945 979 I2C System Monitor. 980 981 This driver can also be built as a module. If so, the module will 982 be called ltc2945. 983 984config SENSORS_LTC2947 985 tristate 986 987config SENSORS_LTC2947_I2C 988 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" 989 depends on I2C 990 select REGMAP_I2C 991 select SENSORS_LTC2947 992 help 993 If you say yes here you get support for Linear Technology LTC2947 994 I2C High Precision Power and Energy Monitor 995 996 This driver can also be built as a module. If so, the module will 997 be called ltc2947-i2c. 998 999config SENSORS_LTC2947_SPI 1000 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" 1001 depends on SPI_MASTER 1002 select REGMAP_SPI 1003 select SENSORS_LTC2947 1004 help 1005 If you say yes here you get support for Linear Technology LTC2947 1006 SPI High Precision Power and Energy Monitor 1007 1008 This driver can also be built as a module. If so, the module will 1009 be called ltc2947-spi. 1010 1011config SENSORS_LTC2990 1012 tristate "Linear Technology LTC2990" 1013 depends on I2C 1014 help 1015 If you say yes here you get support for Linear Technology LTC2990 1016 I2C System Monitor. The LTC2990 supports a combination of voltage, 1017 current and temperature monitoring. 1018 1019 This driver can also be built as a module. If so, the module will 1020 be called ltc2990. 1021 1022config SENSORS_LTC2991 1023 tristate "Analog Devices LTC2991" 1024 depends on I2C 1025 select REGMAP_I2C 1026 help 1027 If you say yes here you get support for Analog Devices LTC2991 1028 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 1029 supports a combination of voltage, current and temperature monitoring. 1030 1031 This driver can also be built as a module. If so, the module will 1032 be called ltc2991. 1033 1034config SENSORS_LTC2992 1035 tristate "Linear Technology LTC2992" 1036 depends on I2C 1037 depends on GPIOLIB 1038 help 1039 If you say yes here you get support for Linear Technology LTC2992 1040 I2C System Monitor. The LTC2992 measures current, voltage, and 1041 power of two supplies. 1042 1043 This driver can also be built as a module. If so, the module will 1044 be called ltc2992. 1045 1046config SENSORS_LTC4151 1047 tristate "Linear Technology LTC4151" 1048 depends on I2C 1049 help 1050 If you say yes here you get support for Linear Technology LTC4151 1051 High Voltage I2C Current and Voltage Monitor interface. 1052 1053 This driver can also be built as a module. If so, the module will 1054 be called ltc4151. 1055 1056config SENSORS_LTC4215 1057 tristate "Linear Technology LTC4215" 1058 depends on I2C 1059 help 1060 If you say yes here you get support for Linear Technology LTC4215 1061 Hot Swap Controller I2C interface. 1062 1063 This driver can also be built as a module. If so, the module will 1064 be called ltc4215. 1065 1066config SENSORS_LTC4222 1067 tristate "Linear Technology LTC4222" 1068 depends on I2C 1069 select REGMAP_I2C 1070 help 1071 If you say yes here you get support for Linear Technology LTC4222 1072 Dual Hot Swap Controller I2C interface. 1073 1074 This driver can also be built as a module. If so, the module will 1075 be called ltc4222. 1076 1077config SENSORS_LTC4245 1078 tristate "Linear Technology LTC4245" 1079 depends on I2C 1080 help 1081 If you say yes here you get support for Linear Technology LTC4245 1082 Multiple Supply Hot Swap Controller I2C interface. 1083 1084 This driver can also be built as a module. If so, the module will 1085 be called ltc4245. 1086 1087config SENSORS_LTC4260 1088 tristate "Linear Technology LTC4260" 1089 depends on I2C 1090 select REGMAP_I2C 1091 help 1092 If you say yes here you get support for Linear Technology LTC4260 1093 Positive Voltage Hot Swap Controller I2C interface. 1094 1095 This driver can also be built as a module. If so, the module will 1096 be called ltc4260. 1097 1098config SENSORS_LTC4261 1099 tristate "Linear Technology LTC4261" 1100 depends on I2C 1101 help 1102 If you say yes here you get support for Linear Technology LTC4261 1103 Negative Voltage Hot Swap Controller I2C interface. 1104 1105 This driver can also be built as a module. If so, the module will 1106 be called ltc4261. 1107 1108config SENSORS_LTC4282 1109 tristate "Analog Devices LTC4282" 1110 depends on I2C 1111 select REGMAP_I2C 1112 help 1113 If you say yes here you get support for Analog Devices LTC4282 1114 High Current Hot Swap Controller I2C interface. 1115 1116 This driver can also be built as a module. If so, the module will 1117 be called ltc4282. 1118 1119config SENSORS_LTQ_CPUTEMP 1120 bool "Lantiq cpu temperature sensor driver" 1121 depends on SOC_XWAY 1122 help 1123 If you say yes here you get support for the temperature 1124 sensor inside your CPU. 1125 1126config SENSORS_MAX1111 1127 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" 1128 depends on SPI_MASTER 1129 help 1130 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 1131 ADC chips. 1132 1133 This driver can also be built as a module. If so, the module 1134 will be called max1111. 1135 1136config SENSORS_MAX127 1137 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" 1138 depends on I2C 1139 help 1140 Say y here to support Maxim's MAX127 DAS chips. 1141 1142 This driver can also be built as a module. If so, the module 1143 will be called max127. 1144 1145config SENSORS_MAX16065 1146 tristate "Maxim MAX16065 System Manager and compatibles" 1147 depends on I2C 1148 help 1149 If you say yes here you get support for hardware monitoring 1150 capabilities of the following Maxim System Manager chips. 1151 MAX16065 1152 MAX16066 1153 MAX16067 1154 MAX16068 1155 MAX16070 1156 MAX16071 1157 1158 This driver can also be built as a module. If so, the module 1159 will be called max16065. 1160 1161config SENSORS_MAX1619 1162 tristate "Maxim MAX1619 sensor chip" 1163 depends on I2C 1164 help 1165 If you say yes here you get support for MAX1619 sensor chip. 1166 1167 This driver can also be built as a module. If so, the module 1168 will be called max1619. 1169 1170config SENSORS_MAX1668 1171 tristate "Maxim MAX1668 and compatibles" 1172 depends on I2C 1173 select REGMAP_I2C 1174 help 1175 If you say yes here you get support for MAX1668, MAX1989 and 1176 MAX1805 chips. 1177 1178 This driver can also be built as a module. If so, the module 1179 will be called max1668. 1180 1181config SENSORS_MAX197 1182 tristate "Maxim MAX197 and compatibles" 1183 help 1184 Support for the Maxim MAX197 A/D converter. 1185 Support will include, but not be limited to, MAX197, and MAX199. 1186 1187 This driver can also be built as a module. If so, the module 1188 will be called max197. 1189 1190config SENSORS_MAX31722 1191 tristate "MAX31722 temperature sensor" 1192 depends on SPI 1193 help 1194 Support for the Maxim Integrated MAX31722/MAX31723 digital 1195 thermometers/thermostats operating over an SPI interface. 1196 1197 This driver can also be built as a module. If so, the module 1198 will be called max31722. 1199 1200config SENSORS_MAX31730 1201 tristate "MAX31730 temperature sensor" 1202 depends on I2C 1203 help 1204 Support for the Maxim Integrated MAX31730 3-Channel Remote 1205 Temperature Sensor. 1206 1207 This driver can also be built as a module. If so, the module 1208 will be called max31730. 1209 1210config SENSORS_MAX31760 1211 tristate "MAX31760 fan speed controller" 1212 depends on I2C 1213 select REGMAP_I2C 1214 help 1215 Support for the Analog Devices MAX31760 Precision Fan-Speed 1216 Controller. MAX31760 integrates temperature sensing along with 1217 precision PWM fan control. 1218 1219 This driver can also be built as a module. If so, the module 1220 will be called max31760. 1221 1222config MAX31827 1223 tristate "MAX31827 low-power temperature switch and similar devices" 1224 depends on I2C 1225 select REGMAP_I2C 1226 help 1227 If you say yes here you get support for MAX31827, MAX31828 and 1228 MAX31829 low-power temperature switches and sensors connected with I2C. 1229 1230 This driver can also be built as a module. If so, the module 1231 will be called max31827. 1232 1233config SENSORS_MAX6620 1234 tristate "Maxim MAX6620 fan controller" 1235 depends on I2C 1236 help 1237 If you say yes here you get support for the MAX6620 1238 fan controller. 1239 1240 This driver can also be built as a module. If so, the module 1241 will be called max6620. 1242 1243config SENSORS_MAX6621 1244 tristate "Maxim MAX6621 sensor chip" 1245 depends on I2C 1246 select REGMAP_I2C 1247 help 1248 If you say yes here you get support for MAX6621 sensor chip. 1249 MAX6621 is a PECI-to-I2C translator provides an efficient, 1250 low-cost solution for PECI-to-SMBus/I2C protocol conversion. 1251 It allows reading the temperature from the PECI-compliant 1252 host directly from up to four PECI-enabled CPUs. 1253 1254 This driver can also be built as a module. If so, the module 1255 will be called max6621. 1256 1257config SENSORS_MAX6639 1258 tristate "Maxim MAX6639 sensor chip" 1259 depends on I2C 1260 select REGMAP_I2C 1261 help 1262 If you say yes here you get support for the MAX6639 1263 sensor chips. 1264 1265 This driver can also be built as a module. If so, the module 1266 will be called max6639. 1267 1268config SENSORS_MAX6650 1269 tristate "Maxim MAX6650 sensor chip" 1270 depends on I2C 1271 depends on THERMAL || THERMAL=n 1272 help 1273 If you say yes here you get support for the MAX6650 / MAX6651 1274 sensor chips. 1275 1276 This driver can also be built as a module. If so, the module 1277 will be called max6650. 1278 1279config SENSORS_MAX6697 1280 tristate "Maxim MAX6697 and compatibles" 1281 depends on I2C 1282 help 1283 If you say yes here you get support for MAX6581, MAX6602, MAX6622, 1284 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 1285 temperature sensor chips. 1286 1287 This driver can also be built as a module. If so, the module 1288 will be called max6697. 1289 1290config SENSORS_MAX31790 1291 tristate "Maxim MAX31790 sensor chip" 1292 depends on I2C 1293 help 1294 If you say yes here you get support for 6-Channel PWM-Output 1295 Fan RPM Controller. 1296 1297 This driver can also be built as a module. If so, the module 1298 will be called max31790. 1299 1300config SENSORS_MC34VR500 1301 tristate "NXP MC34VR500 hardware monitoring driver" 1302 depends on I2C 1303 select REGMAP_I2C 1304 help 1305 If you say yes here you get support for the temperature and input 1306 voltage sensors of the NXP MC34VR500. 1307 1308config SENSORS_MCP3021 1309 tristate "Microchip MCP3021 and compatibles" 1310 depends on I2C 1311 help 1312 If you say yes here you get support for MCP3021 and MCP3221. 1313 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 1314 with 12-bit resolution. 1315 1316 This driver can also be built as a module. If so, the module 1317 will be called mcp3021. 1318 1319config SENSORS_MLXREG_FAN 1320 tristate "Mellanox FAN driver" 1321 depends on MELLANOX_PLATFORM 1322 imply THERMAL 1323 select REGMAP 1324 help 1325 This option enables support for the FAN control on the Mellanox 1326 Ethernet and InfiniBand switches. The driver can be activated by the 1327 platform device add call. Say Y to enable these. To compile this 1328 driver as a module, choose 'M' here: the module will be called 1329 mlxreg-fan. 1330 1331config SENSORS_TC654 1332 tristate "Microchip TC654/TC655 and compatibles" 1333 depends on I2C 1334 help 1335 If you say yes here you get support for TC654 and TC655. 1336 The TC654 and TC655 are PWM mode fan speed controllers with 1337 FanSense technology for use with brushless DC fans. 1338 1339 This driver can also be built as a module. If so, the module 1340 will be called tc654. 1341 1342config SENSORS_TPS23861 1343 tristate "Texas Instruments TPS23861 PoE PSE" 1344 depends on I2C 1345 select REGMAP_I2C 1346 help 1347 If you say yes here you get support for Texas Instruments 1348 TPS23861 802.3at PoE PSE chips. 1349 1350 This driver can also be built as a module. If so, the module 1351 will be called tps23861. 1352 1353config SENSORS_MENF21BMC_HWMON 1354 tristate "MEN 14F021P00 BMC Hardware Monitoring" 1355 depends on MFD_MENF21BMC 1356 help 1357 Say Y here to include support for the MEN 14F021P00 BMC 1358 hardware monitoring. 1359 1360 This driver can also be built as a module. If so the module 1361 will be called menf21bmc_hwmon. 1362 1363config SENSORS_MR75203 1364 tristate "Moortec Semiconductor MR75203 PVT Controller" 1365 select REGMAP_MMIO 1366 help 1367 If you say yes here you get support for Moortec MR75203 1368 PVT controller. 1369 1370 This driver can also be built as a module. If so, the module 1371 will be called mr75203. 1372 1373config SENSORS_ADCXX 1374 tristate "National Semiconductor ADCxxxSxxx" 1375 depends on SPI_MASTER 1376 help 1377 If you say yes here you get support for the National Semiconductor 1378 ADC<bb><c>S<sss> chip family, where 1379 * bb is the resolution in number of bits (8, 10, 12) 1380 * c is the number of channels (1, 2, 4, 8) 1381 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 1382 kSPS and 101 for 1 MSPS) 1383 1384 Examples : ADC081S101, ADC124S501, ... 1385 1386 This driver can also be built as a module. If so, the module 1387 will be called adcxx. 1388 1389config SENSORS_LM63 1390 tristate "National Semiconductor LM63 and compatibles" 1391 depends on I2C 1392 help 1393 If you say yes here you get support for the National 1394 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature 1395 sensors with integrated fan control. Such chips are found 1396 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 1397 others. 1398 1399 This driver can also be built as a module. If so, the module 1400 will be called lm63. 1401 1402config SENSORS_LM70 1403 tristate "National Semiconductor LM70 and compatibles" 1404 depends on SPI_MASTER 1405 help 1406 If you say yes here you get support for the National Semiconductor 1407 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, 1408 TMP125 digital temperature sensor chips. 1409 1410 This driver can also be built as a module. If so, the module 1411 will be called lm70. 1412 1413config SENSORS_LM73 1414 tristate "National Semiconductor LM73" 1415 depends on I2C 1416 help 1417 If you say yes here you get support for National Semiconductor LM73 1418 sensor chips. 1419 This driver can also be built as a module. If so, the module 1420 will be called lm73. 1421 1422config SENSORS_LM75 1423 tristate "National Semiconductor LM75 and compatibles" 1424 depends on I2C 1425 depends on I3C || !I3C 1426 select REGMAP_I2C 1427 select REGMAP_I3C if I3C 1428 help 1429 If you say yes here you get support for one common type of 1430 temperature sensor chip, with models including: 1431 1432 - Analog Devices ADT75 1433 - Atmel (now Microchip) AT30TS74 1434 - Dallas Semiconductor DS75, DS1775 and DS7505 1435 - Global Mixed-mode Technology (GMT) G751 1436 - Maxim MAX6625 and MAX6626 1437 - Microchip MCP980x 1438 - National Semiconductor LM75, LM75A 1439 - NXP's LM75A 1440 - ST Microelectronics STDS75 1441 - ST Microelectronics STLM75 1442 - TelCom (now Microchip) TCN75 1443 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, 1444 TMP175, TMP275 1445 1446 This driver supports driver model based binding through board 1447 specific I2C device tables. 1448 1449 It also supports the "legacy" style of driver binding. To use 1450 that with some chips which don't replicate LM75 quirks exactly, 1451 you may need the "force" module parameter. 1452 1453 This driver can also be built as a module. If so, the module 1454 will be called lm75. 1455 1456config SENSORS_LM77 1457 tristate "National Semiconductor LM77" 1458 depends on I2C 1459 help 1460 If you say yes here you get support for National Semiconductor LM77 1461 sensor chips. 1462 1463 This driver can also be built as a module. If so, the module 1464 will be called lm77. 1465 1466config SENSORS_LM78 1467 tristate "National Semiconductor LM78 and compatibles" 1468 depends on I2C 1469 select HWMON_VID 1470 help 1471 If you say yes here you get support for National Semiconductor LM78, 1472 LM78-J and LM79. 1473 1474 This driver can also be built as a module. If so, the module 1475 will be called lm78. 1476 1477config SENSORS_LM80 1478 tristate "National Semiconductor LM80 and LM96080" 1479 depends on I2C 1480 help 1481 If you say yes here you get support for National Semiconductor 1482 LM80 and LM96080 sensor chips. 1483 1484 This driver can also be built as a module. If so, the module 1485 will be called lm80. 1486 1487config SENSORS_LM83 1488 tristate "National Semiconductor LM83 and compatibles" 1489 depends on I2C 1490 select REGMAP 1491 help 1492 If you say yes here you get support for National Semiconductor 1493 LM82 and LM83 sensor chips. 1494 1495 This driver can also be built as a module. If so, the module 1496 will be called lm83. 1497 1498config SENSORS_LM85 1499 tristate "National Semiconductor LM85 and compatibles" 1500 depends on I2C 1501 select HWMON_VID 1502 help 1503 If you say yes here you get support for National Semiconductor LM85 1504 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 1505 EMC6D101, EMC6D102, and EMC6D103. 1506 1507 This driver can also be built as a module. If so, the module 1508 will be called lm85. 1509 1510config SENSORS_LM87 1511 tristate "National Semiconductor LM87 and compatibles" 1512 depends on I2C 1513 select HWMON_VID 1514 help 1515 If you say yes here you get support for National Semiconductor LM87 1516 and Analog Devices ADM1024 sensor chips. 1517 1518 This driver can also be built as a module. If so, the module 1519 will be called lm87. 1520 1521config SENSORS_LM90 1522 tristate "National Semiconductor LM90 and compatibles" 1523 depends on I2C 1524 help 1525 If you say yes here you get support for National Semiconductor LM84, 1526 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, 1527 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, 1528 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, 1529 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, 1530 MAX6696, 1531 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, 1532 Winbond/Nuvoton W83L771W/G/AWG/ASG, NCT7716, NCT7717 and NCT7718, 1533 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 1534 sensor chips. 1535 1536 This driver can also be built as a module. If so, the module 1537 will be called lm90. 1538 1539config SENSORS_LM92 1540 tristate "National Semiconductor LM92 and compatibles" 1541 depends on I2C 1542 select REGMAP_I2C 1543 help 1544 If you say yes here you get support for National Semiconductor LM92 1545 and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. 1546 1547 This driver can also be built as a module. If so, the module 1548 will be called lm92. 1549 1550config SENSORS_LM93 1551 tristate "National Semiconductor LM93 and compatibles" 1552 depends on I2C 1553 select HWMON_VID 1554 help 1555 If you say yes here you get support for National Semiconductor LM93, 1556 LM94, and compatible sensor chips. 1557 1558 This driver can also be built as a module. If so, the module 1559 will be called lm93. 1560 1561config SENSORS_LM95234 1562 tristate "National Semiconductor LM95234 and compatibles" 1563 depends on I2C 1564 select REGMAP_I2C 1565 help 1566 If you say yes here you get support for the LM95233 and LM95234 1567 temperature sensor chips. 1568 1569 This driver can also be built as a module. If so, the module 1570 will be called lm95234. 1571 1572config SENSORS_LM95241 1573 tristate "National Semiconductor LM95241 and compatibles" 1574 depends on I2C 1575 help 1576 If you say yes here you get support for LM95231 and LM95241 sensor 1577 chips. 1578 1579 This driver can also be built as a module. If so, the module 1580 will be called lm95241. 1581 1582config SENSORS_LM95245 1583 tristate "National Semiconductor LM95245 and compatibles" 1584 depends on I2C 1585 select REGMAP_I2C 1586 help 1587 If you say yes here you get support for LM95235 and LM95245 1588 temperature sensor chips. 1589 1590 This driver can also be built as a module. If so, the module 1591 will be called lm95245. 1592 1593config SENSORS_PC87360 1594 tristate "National Semiconductor PC87360 family" 1595 depends on HAS_IOPORT 1596 depends on !PPC 1597 select HWMON_VID 1598 help 1599 If you say yes here you get access to the hardware monitoring 1600 functions of the National Semiconductor PC8736x Super-I/O chips. 1601 The PC87360, PC87363 and PC87364 only have fan monitoring and 1602 control. The PC87365 and PC87366 additionally have voltage and 1603 temperature monitoring. 1604 1605 This driver can also be built as a module. If so, the module 1606 will be called pc87360. 1607 1608config SENSORS_PC87427 1609 tristate "National Semiconductor PC87427" 1610 depends on HAS_IOPORT 1611 depends on !PPC 1612 help 1613 If you say yes here you get access to the hardware monitoring 1614 functions of the National Semiconductor PC87427 Super-I/O chip. 1615 The chip has two distinct logical devices, one for fan speed 1616 monitoring and control, and one for voltage and temperature 1617 monitoring. Fan speed monitoring and control are supported, as 1618 well as temperature monitoring. Voltages aren't supported yet. 1619 1620 This driver can also be built as a module. If so, the module 1621 will be called pc87427. 1622 1623config SENSORS_NTC_THERMISTOR 1624 tristate "NTC thermistor support" 1625 depends on IIO 1626 depends on THERMAL || !THERMAL_OF 1627 help 1628 This driver supports NTC thermistors sensor reading and its 1629 interpretation. The driver can also monitor the temperature and 1630 send notifications about the temperature. 1631 1632 Currently, this driver supports 1633 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, 1634 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and 1635 B57891S0103 from EPCOS. 1636 1637 This driver can also be built as a module. If so, the module 1638 will be called ntc_thermistor. 1639 1640config SENSORS_NCT6683 1641 tristate "Nuvoton NCT6683D" 1642 depends on HAS_IOPORT 1643 depends on !PPC 1644 help 1645 If you say yes here you get support for the hardware monitoring 1646 functionality of the Nuvoton NCT6683D eSIO chip. 1647 1648 This driver can also be built as a module. If so, the module 1649 will be called nct6683. 1650 1651config SENSORS_NCT6775_CORE 1652 tristate 1653 select REGMAP 1654 help 1655 This module contains common code shared by the platform and 1656 i2c versions of the nct6775 driver; it is not useful on its 1657 own. 1658 1659 If built as a module, the module will be called 1660 nct6775-core. 1661 1662config SENSORS_NCT6775 1663 tristate "Platform driver for Nuvoton NCT6775F and compatibles" 1664 depends on HAS_IOPORT 1665 depends on !PPC 1666 depends on ACPI || ACPI=n 1667 select HWMON_VID 1668 select SENSORS_NCT6775_CORE 1669 help 1670 If you say yes here you get support for the hardware monitoring 1671 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1672 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1673 Super-I/O chips. This driver replaces the w83627ehf driver for 1674 NCT6775F and NCT6776F. 1675 1676 This driver can also be built as a module. If so, the module 1677 will be called nct6775. 1678 1679config SENSORS_NCT6775_I2C 1680 tristate "I2C driver for Nuvoton NCT6775F and compatibles" 1681 depends on I2C 1682 select REGMAP_I2C 1683 select SENSORS_NCT6775_CORE 1684 help 1685 If you say yes here you get support for the hardware monitoring 1686 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, 1687 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible 1688 Super-I/O chips via their I2C interface. 1689 1690 If you're not building a kernel for a BMC, this is probably 1691 not the driver you want (see CONFIG_SENSORS_NCT6775). 1692 1693 This driver can also be built as a module. If so, the module 1694 will be called nct6775-i2c. 1695 1696config SENSORS_NCT7363 1697 tristate "Nuvoton NCT7363Y" 1698 depends on I2C 1699 select REGMAP_I2C 1700 help 1701 If you say yes here you get support for the Nuvoton NCT7363Y 1702 hardware monitoring chip. 1703 1704 This driver can also be built as a module. If so, the module 1705 will be called nct7363. 1706 1707config SENSORS_NCT7802 1708 tristate "Nuvoton NCT7802Y" 1709 depends on I2C 1710 select REGMAP_I2C 1711 help 1712 If you say yes here you get support for the Nuvoton NCT7802Y 1713 hardware monitoring chip. 1714 1715 This driver can also be built as a module. If so, the module 1716 will be called nct7802. 1717 1718config SENSORS_NCT7904 1719 tristate "Nuvoton NCT7904" 1720 depends on I2C && WATCHDOG 1721 select WATCHDOG_CORE 1722 help 1723 If you say yes here you get support for the Nuvoton NCT7904 1724 hardware monitoring chip, including manual fan speed control 1725 and support for the integrated watchdog. 1726 1727 This driver can also be built as a module. If so, the module 1728 will be called nct7904. 1729 1730config SENSORS_NPCM7XX 1731 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" 1732 imply THERMAL 1733 help 1734 This driver provides support for Nuvoton NPCM750/730/715/705 PWM 1735 and Fan controllers. 1736 1737 This driver can also be built as a module. If so, the module 1738 will be called npcm750-pwm-fan. 1739 1740config SENSORS_NSA320 1741 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" 1742 depends on GPIOLIB && OF 1743 depends on MACH_KIRKWOOD || COMPILE_TEST 1744 help 1745 If you say yes here you get support for hardware monitoring 1746 for the ZyXEL NSA320 Media Server and other compatible devices 1747 (probably the NSA325 and some NSA310 variants). 1748 1749 The sensor data is taken from a Holtek HT46R065 microcontroller 1750 connected to GPIO lines. 1751 1752 This driver can also be built as a module. If so, the module 1753 will be called nsa320-hwmon. 1754 1755config SENSORS_NZXT_KRAKEN2 1756 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" 1757 depends on USB_HID 1758 help 1759 If you say yes here you get support for hardware monitoring for the 1760 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. 1761 1762 This driver can also be built as a module. If so, the module 1763 will be called nzxt-kraken2. 1764 1765config SENSORS_NZXT_KRAKEN3 1766 tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" 1767 depends on USB_HID 1768 help 1769 If you say yes here you get support for hardware monitoring for the 1770 NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. 1771 1772 This driver can also be built as a module. If so, the module 1773 will be called nzxt-kraken3. 1774 1775config SENSORS_NZXT_SMART2 1776 tristate "NZXT RGB & Fan Controller/Smart Device v2" 1777 depends on USB_HID 1778 help 1779 If you say yes here you get support for hardware monitoring for the 1780 NZXT RGB & Fan Controller/Smart Device v2. 1781 1782 This driver can also be built as a module. If so, the module 1783 will be called nzxt-smart2. 1784 1785source "drivers/hwmon/occ/Kconfig" 1786 1787config SENSORS_OXP 1788 tristate "OneXPlayer EC fan control" 1789 depends on ACPI_EC 1790 depends on X86 1791 help 1792 If you say yes here you get support for fan readings and control over 1793 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant 1794 boards are supported. 1795 1796 Can also be built as a module. In that case it will be called oxp-sensors. 1797 1798config SENSORS_PCF8591 1799 tristate "Philips PCF8591 ADC/DAC" 1800 depends on I2C 1801 help 1802 If you say yes here you get support for Philips PCF8591 4-channel 1803 ADC, 1-channel DAC chips. 1804 1805 This driver can also be built as a module. If so, the module 1806 will be called pcf8591. 1807 1808 These devices are hard to detect and rarely found on mainstream 1809 hardware. If unsure, say N. 1810 1811source "drivers/hwmon/peci/Kconfig" 1812 1813source "drivers/hwmon/pmbus/Kconfig" 1814 1815config SENSORS_PT5161L 1816 tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" 1817 depends on I2C 1818 help 1819 If you say yes here you get support for temperature monitoring 1820 on the Astera Labs PT5161L PCIe retimer. 1821 1822 This driver can also be built as a module. If so, the module 1823 will be called pt5161l. 1824 1825config SENSORS_PWM_FAN 1826 tristate "PWM fan" 1827 depends on PWM || COMPILE_TEST 1828 depends on THERMAL || THERMAL=n 1829 help 1830 If you say yes here you get support for fans connected to PWM lines. 1831 The driver uses the generic PWM interface, thus it will work on a 1832 variety of SoCs. 1833 1834 This driver can also be built as a module. If so, the module 1835 will be called pwm-fan. 1836 1837config SENSORS_QNAP_MCU_HWMON 1838 tristate "QNAP MCU hardware monitoring" 1839 depends on MFD_QNAP_MCU 1840 depends on THERMAL || THERMAL=n 1841 help 1842 Say yes here to enable support for fan and temperature sensor 1843 connected to a QNAP MCU, as found in a number of QNAP network 1844 attached storage devices. 1845 1846 This driver can also be built as a module. If so, the module 1847 will be called qnap-mcu-hwmon. 1848 1849config SENSORS_RASPBERRYPI_HWMON 1850 tristate "Raspberry Pi voltage monitor" 1851 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) 1852 help 1853 If you say yes here you get support for voltage sensor on the 1854 Raspberry Pi. 1855 1856 This driver can also be built as a module. If so, the module 1857 will be called raspberrypi-hwmon. 1858 1859config SENSORS_SL28CPLD 1860 tristate "Kontron sl28cpld hardware monitoring driver" 1861 depends on MFD_SL28CPLD || COMPILE_TEST 1862 help 1863 If you say yes here you get support for the fan supervisor of the 1864 sl28cpld board management controller. 1865 1866 This driver can also be built as a module. If so, the module 1867 will be called sl28cpld-hwmon. 1868 1869config SENSORS_SBTSI 1870 tristate "Emulated SB-TSI temperature sensor" 1871 depends on I2C 1872 help 1873 If you say yes here you get support for emulated temperature 1874 sensors on AMD SoCs with SB-TSI interface connected to a BMC device. 1875 1876 This driver can also be built as a module. If so, the module will 1877 be called sbtsi_temp. 1878 1879config SENSORS_SBRMI 1880 tristate "Emulated SB-RMI sensor" 1881 depends on I2C 1882 help 1883 If you say yes here you get support for emulated RMI 1884 sensors on AMD SoCs with APML interface connected to a BMC device. 1885 1886 This driver can also be built as a module. If so, the module will 1887 be called sbrmi. 1888 1889config SENSORS_SHT15 1890 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 1891 depends on GPIOLIB || COMPILE_TEST 1892 select BITREVERSE 1893 help 1894 If you say yes here you get support for the Sensiron SHT10, SHT11, 1895 SHT15, SHT71, SHT75 humidity and temperature sensors. 1896 1897 This driver can also be built as a module. If so, the module 1898 will be called sht15. 1899 1900config SENSORS_SHT21 1901 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 1902 depends on I2C 1903 help 1904 If you say yes here you get support for the Sensiron SHT21, SHT25 1905 humidity and temperature sensors. 1906 1907 This driver can also be built as a module. If so, the module 1908 will be called sht21. 1909 1910config SENSORS_SHT3x 1911 tristate "Sensiron humidity and temperature sensors. SHT3x and compat." 1912 depends on I2C 1913 select CRC8 1914 help 1915 If you say yes here you get support for the Sensiron SHT30 and SHT31 1916 humidity and temperature sensors. 1917 1918 This driver can also be built as a module. If so, the module 1919 will be called sht3x. 1920 1921config SENSORS_SHT4x 1922 tristate "Sensiron humidity and temperature sensors. SHT4x and compat." 1923 depends on I2C 1924 select CRC8 1925 help 1926 If you say yes here you get support for the Sensiron SHT40, SHT41 and 1927 SHT45 humidity and temperature sensors. 1928 1929 This driver can also be built as a module. If so, the module 1930 will be called sht4x. 1931 1932config SENSORS_SHTC1 1933 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." 1934 depends on I2C 1935 help 1936 If you say yes here you get support for the Sensiron SHTC1, SHTW1, 1937 and SHTC3 humidity and temperature sensors. 1938 1939 This driver can also be built as a module. If so, the module 1940 will be called shtc1. 1941 1942config SENSORS_SIS5595 1943 tristate "Silicon Integrated Systems Corp. SiS5595" 1944 depends on PCI && HAS_IOPORT 1945 help 1946 If you say yes here you get support for the integrated sensors in 1947 SiS5595 South Bridges. 1948 1949 This driver can also be built as a module. If so, the module 1950 will be called sis5595. 1951 1952config SENSORS_SY7636A 1953 tristate "Silergy SY7636A" 1954 depends on MFD_SY7636A 1955 help 1956 If you say yes here you get support for the thermistor readout of 1957 the Silergy SY7636A PMIC. 1958 1959 This driver can also be built as a module. If so, the module 1960 will be called sy7636a-hwmon. 1961 1962config SENSORS_DME1737 1963 tristate "SMSC DME1737, SCH311x and compatibles" 1964 depends on HAS_IOPORT 1965 depends on I2C && !PPC 1966 select HWMON_VID 1967 help 1968 If you say yes here you get support for the hardware monitoring 1969 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 1970 Asus A8000 Super-I/O chips. 1971 1972 This driver can also be built as a module. If so, the module 1973 will be called dme1737. 1974 1975config SENSORS_EMC1403 1976 tristate "SMSC EMC1403/23 thermal sensor" 1977 depends on I2C 1978 select REGMAP_I2C 1979 help 1980 If you say yes here you get support for the SMSC EMC1403/23 1981 temperature monitoring chip. 1982 1983 Threshold values can be configured using sysfs. 1984 Data from the different diodes are accessible via sysfs. 1985 1986config SENSORS_EMC2103 1987 tristate "SMSC EMC2103" 1988 depends on I2C 1989 help 1990 If you say yes here you get support for the temperature 1991 and fan sensors of the SMSC EMC2103 chips. 1992 1993 This driver can also be built as a module. If so, the module 1994 will be called emc2103. 1995 1996config SENSORS_EMC2305 1997 tristate "Microchip EMC2305 and compatible EMC2301/2/3" 1998 depends on I2C 1999 imply THERMAL 2000 help 2001 If you say yes here you get support for the Microchip EMC2305 2002 fan controller chips. 2003 The Microchip EMC2305 is a fan controller for up to 5 fans. 2004 Fan rotation speeds are reported in RPM. 2005 2006 This driver can also be built as a module. If so, the module 2007 will be called emc2305. 2008 2009config SENSORS_EMC6W201 2010 tristate "SMSC EMC6W201" 2011 depends on I2C 2012 help 2013 If you say yes here you get support for the SMSC EMC6W201 2014 hardware monitoring chip. 2015 2016 This driver can also be built as a module. If so, the module 2017 will be called emc6w201. 2018 2019config SENSORS_SMSC47M1 2020 tristate "SMSC LPC47M10x and compatibles" 2021 depends on HAS_IOPORT 2022 depends on !PPC 2023 help 2024 If you say yes here you get support for the integrated fan 2025 monitoring and control capabilities of the SMSC LPC47B27x, 2026 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 2027 LPC47M192, LPC47M292 and LPC47M997 chips. 2028 2029 The temperature and voltage sensor features of the LPC47M15x, 2030 LPC47M192, LPC47M292 and LPC47M997 are supported by another 2031 driver, select also "SMSC LPC47M192 and compatibles" below for 2032 those. 2033 2034 This driver can also be built as a module. If so, the module 2035 will be called smsc47m1. 2036 2037config SENSORS_SMSC47M192 2038 tristate "SMSC LPC47M192 and compatibles" 2039 depends on I2C 2040 select HWMON_VID 2041 help 2042 If you say yes here you get support for the temperature and 2043 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 2044 and LPC47M997 chips. 2045 2046 The fan monitoring and control capabilities of these chips 2047 are supported by another driver, select 2048 "SMSC LPC47M10x and compatibles" above. You need both drivers 2049 if you want fan control and voltage/temperature sensor support. 2050 2051 This driver can also be built as a module. If so, the module 2052 will be called smsc47m192. 2053 2054config SENSORS_SMSC47B397 2055 tristate "SMSC LPC47B397-NC" 2056 depends on HAS_IOPORT 2057 depends on !PPC 2058 help 2059 If you say yes here you get support for the SMSC LPC47B397-NC 2060 sensor chip. 2061 2062 This driver can also be built as a module. If so, the module 2063 will be called smsc47b397. 2064 2065config SENSORS_SCH56XX_COMMON 2066 tristate 2067 select REGMAP 2068 2069config SENSORS_SCH5627 2070 tristate "SMSC SCH5627" 2071 depends on HAS_IOPORT 2072 depends on !PPC && WATCHDOG 2073 select SENSORS_SCH56XX_COMMON 2074 select WATCHDOG_CORE 2075 help 2076 If you say yes here you get support for the hardware monitoring 2077 features of the SMSC SCH5627 Super-I/O chip including support for 2078 the integrated watchdog. 2079 2080 This driver can also be built as a module. If so, the module 2081 will be called sch5627. 2082 2083config SENSORS_SCH5636 2084 tristate "SMSC SCH5636" 2085 depends on HAS_IOPORT 2086 depends on !PPC && WATCHDOG 2087 select SENSORS_SCH56XX_COMMON 2088 select WATCHDOG_CORE 2089 help 2090 SMSC SCH5636 Super I/O chips include an embedded microcontroller for 2091 hardware monitoring solutions, allowing motherboard manufacturers to 2092 create their own custom hwmon solution based upon the SCH5636. 2093 2094 Currently this driver only supports the Fujitsu Theseus SCH5636 based 2095 hwmon solution. Say yes here if you want support for the Fujitsu 2096 Theseus' hardware monitoring features including support for the 2097 integrated watchdog. 2098 2099 This driver can also be built as a module. If so, the module 2100 will be called sch5636. 2101 2102config SENSORS_STTS751 2103 tristate "ST Microelectronics STTS751" 2104 depends on I2C 2105 help 2106 If you say yes here you get support for STTS751 2107 temperature sensor chips. 2108 2109 This driver can also be built as a module. If so, the module 2110 will be called stts751. 2111 2112config SENSORS_SFCTEMP 2113 tristate "Starfive JH71x0 temperature sensor" 2114 depends on ARCH_STARFIVE || COMPILE_TEST 2115 help 2116 If you say yes here you get support for temperature sensor 2117 on the Starfive JH71x0 SoCs. 2118 2119 This driver can also be built as a module. If so, the module 2120 will be called sfctemp. 2121 2122config SENSORS_SG2042_MCU 2123 tristate "Sophgo onboard MCU support" 2124 depends on I2C 2125 depends on ARCH_SOPHGO || COMPILE_TEST 2126 help 2127 Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides 2128 power control and some basic information. 2129 2130 This driver can be built as a module. If so, the module 2131 will be called sg2042-mcu. 2132 2133config SENSORS_SURFACE_FAN 2134 tristate "Surface Fan Driver" 2135 depends on SURFACE_AGGREGATOR 2136 depends on SURFACE_AGGREGATOR_BUS 2137 help 2138 Driver that provides monitoring of the fan on Surface Pro devices that 2139 have a fan, like the Surface Pro 9. 2140 2141 This makes the fan's current speed accessible through the hwmon 2142 system. It does not provide control over the fan, the firmware is 2143 responsible for that, this driver merely provides monitoring. 2144 2145 Select M or Y here, if you want to be able to read the fan's speed. 2146 2147config SENSORS_SURFACE_TEMP 2148 tristate "Microsoft Surface Thermal Sensor Driver" 2149 depends on SURFACE_AGGREGATOR 2150 depends on SURFACE_AGGREGATOR_BUS 2151 help 2152 Driver for monitoring thermal sensors connected via the Surface 2153 Aggregator Module (embedded controller) on Microsoft Surface devices. 2154 2155 This driver can also be built as a module. If so, the module 2156 will be called surface_temp. 2157 2158config SENSORS_ADC128D818 2159 tristate "Texas Instruments ADC128D818" 2160 depends on I2C 2161 help 2162 If you say yes here you get support for the Texas Instruments 2163 ADC128D818 System Monitor with Temperature Sensor chip. 2164 2165 This driver can also be built as a module. If so, the module 2166 will be called adc128d818. 2167 2168config SENSORS_ADS7828 2169 tristate "Texas Instruments ADS7828 and compatibles" 2170 depends on I2C 2171 select REGMAP_I2C 2172 help 2173 If you say yes here you get support for Texas Instruments ADS7828 and 2174 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while 2175 it is 8-bit on ADS7830. 2176 2177 This driver can also be built as a module. If so, the module 2178 will be called ads7828. 2179 2180config SENSORS_ADS7871 2181 tristate "Texas Instruments ADS7871 A/D converter" 2182 depends on SPI 2183 help 2184 If you say yes here you get support for TI ADS7871 & ADS7870 2185 2186 This driver can also be built as a module. If so, the module 2187 will be called ads7871. 2188 2189config SENSORS_AMC6821 2190 tristate "Texas Instruments AMC6821" 2191 depends on I2C 2192 select REGMAP_I2C 2193 help 2194 If you say yes here you get support for the Texas Instruments 2195 AMC6821 hardware monitoring chips. 2196 2197 This driver can also be built as a module. If so, the module 2198 will be called amc6821. 2199 2200config SENSORS_INA209 2201 tristate "TI / Burr Brown INA209" 2202 depends on I2C 2203 help 2204 If you say yes here you get support for the TI / Burr Brown INA209 2205 voltage / current / power monitor I2C interface. 2206 2207 This driver can also be built as a module. If so, the module will 2208 be called ina209. 2209 2210config SENSORS_INA2XX 2211 tristate "Texas Instruments INA219 and compatibles" 2212 depends on I2C 2213 select REGMAP_I2C 2214 help 2215 If you say yes here you get support for INA219, INA220, INA226, 2216 INA230, INA231, INA260, and SY24655 power monitor chips. 2217 2218 The INA2xx driver is configured for the default configuration of 2219 the part as described in the datasheet. 2220 Default value for Rshunt is 10 mOhms except for INA260 which has an 2221 internal 2 mOhm shunt resistor. 2222 This driver can also be built as a module. If so, the module 2223 will be called ina2xx. 2224 2225config SENSORS_INA238 2226 tristate "Texas Instruments INA238" 2227 depends on I2C 2228 select REGMAP_I2C 2229 help 2230 If you say yes here you get support for the INA238 power monitor 2231 chip. This driver supports voltage, current, power and temperature 2232 measurements as well as alarm configuration. 2233 2234 This driver can also be built as a module. If so, the module 2235 will be called ina238. 2236 2237config SENSORS_INA3221 2238 tristate "Texas Instruments INA3221 Triple Power Monitor" 2239 depends on I2C 2240 select REGMAP_I2C 2241 help 2242 If you say yes here you get support for the TI INA3221 Triple Power 2243 Monitor. 2244 2245 This driver can also be built as a module. If so, the module 2246 will be called ina3221. 2247 2248config SENSORS_SPD5118 2249 tristate "SPD5118 Compliant Temperature Sensors" 2250 depends on I2C 2251 select REGMAP_I2C 2252 help 2253 If you say yes here you get support for SPD5118 (JEDEC JESD300) 2254 compliant temperature sensors. Such sensors are found on DDR5 memory 2255 modules. 2256 2257 This driver can also be built as a module. If so, the module 2258 will be called spd5118. 2259 2260config SENSORS_SPD5118_DETECT 2261 bool "Enable detect function" 2262 depends on SENSORS_SPD5118 2263 default (!DMI || !X86) 2264 help 2265 If enabled, the driver auto-detects if a chip in the SPD address 2266 range is compliant to the SPD51888 standard and auto-instantiates 2267 if that is the case. If disabled, SPD5118 compliant devices have 2268 to be instantiated by other means. On X86 systems with DMI support 2269 this will typically be done from DMI DDR detection code in the 2270 I2C SMBus subsystem. Devicetree based systems will instantiate 2271 attached devices if the DIMMs are listed in the devicetree file. 2272 2273 Disabling the detect function will speed up boot time and reduce 2274 the risk of mis-detecting SPD5118 compliant devices. However, it 2275 may result in missed DIMMs under some circumstances. 2276 2277 If unsure, say Y. 2278 2279config SENSORS_TC74 2280 tristate "Microchip TC74" 2281 depends on I2C 2282 help 2283 If you say yes here you get support for Microchip TC74 single 2284 input temperature sensor chips. 2285 2286 This driver can also be built as a module. If so, the module 2287 will be called tc74. 2288 2289config SENSORS_THMC50 2290 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 2291 depends on I2C 2292 help 2293 If you say yes here you get support for Texas Instruments THMC50 2294 sensor chips and clones: the Analog Devices ADM1022. 2295 2296 This driver can also be built as a module. If so, the module 2297 will be called thmc50. 2298 2299config SENSORS_TMP102 2300 tristate "Texas Instruments TMP102" 2301 depends on I2C 2302 select REGMAP_I2C 2303 help 2304 If you say yes here you get support for Texas Instruments TMP102 2305 sensor chips. 2306 2307 This driver can also be built as a module. If so, the module 2308 will be called tmp102. 2309 2310config SENSORS_TMP103 2311 tristate "Texas Instruments TMP103" 2312 depends on I2C 2313 select REGMAP_I2C 2314 help 2315 If you say yes here you get support for Texas Instruments TMP103 2316 sensor chips. 2317 2318 This driver can also be built as a module. If so, the module 2319 will be called tmp103. 2320 2321config SENSORS_TMP108 2322 tristate "Texas Instruments TMP108" 2323 depends on I2C 2324 depends on I3C || !I3C 2325 select REGMAP_I2C 2326 select REGMAP_I3C if I3C 2327 help 2328 If you say yes here you get support for Texas Instruments TMP108 2329 sensor chips and NXP P3T1085. 2330 2331 This driver can also be built as a module. If so, the module 2332 will be called tmp108. 2333 2334config SENSORS_TMP401 2335 tristate "Texas Instruments TMP401 and compatibles" 2336 depends on I2C 2337 select REGMAP 2338 help 2339 If you say yes here you get support for Texas Instruments TMP401, 2340 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. 2341 2342 This driver can also be built as a module. If so, the module 2343 will be called tmp401. 2344 2345config SENSORS_TMP421 2346 tristate "Texas Instruments TMP421 and compatible" 2347 depends on I2C 2348 help 2349 If you say yes here you get support for Texas Instruments TMP421, 2350 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. 2351 2352 This driver can also be built as a module. If so, the module 2353 will be called tmp421. 2354 2355config SENSORS_TMP464 2356 tristate "Texas Instruments TMP464 and compatible" 2357 depends on I2C 2358 select REGMAP_I2C 2359 help 2360 If you say yes here you get support for Texas Instruments TMP464 2361 and TMP468 temperature sensor chips. 2362 2363 This driver can also be built as a module. If so, the module 2364 will be called tmp464. 2365 2366config SENSORS_TMP513 2367 tristate "Texas Instruments TMP513 and compatibles" 2368 depends on I2C 2369 select REGMAP_I2C 2370 help 2371 If you say yes here you get support for Texas Instruments TMP512, 2372 and TMP513 temperature and power supply sensor chips. 2373 2374 This driver can also be built as a module. If so, the module 2375 will be called tmp513. 2376 2377config SENSORS_VEXPRESS 2378 tristate "Versatile Express" 2379 depends on VEXPRESS_CONFIG 2380 help 2381 This driver provides support for hardware sensors available on 2382 the ARM Ltd's Versatile Express platform. It can provide wide 2383 range of information like temperature, power, energy. 2384 2385config SENSORS_VIA_CPUTEMP 2386 tristate "VIA CPU temperature sensor" 2387 depends on X86 2388 select HWMON_VID 2389 help 2390 If you say yes here you get support for the temperature 2391 sensor inside your CPU. Supported are all known variants of 2392 the VIA C7 and Nano. 2393 2394config SENSORS_VIA686A 2395 tristate "VIA686A" 2396 depends on PCI && HAS_IOPORT 2397 help 2398 If you say yes here you get support for the integrated sensors in 2399 Via 686A/B South Bridges. 2400 2401 This driver can also be built as a module. If so, the module 2402 will be called via686a. 2403 2404config SENSORS_VT1211 2405 tristate "VIA VT1211" 2406 depends on HAS_IOPORT 2407 depends on !PPC 2408 select HWMON_VID 2409 help 2410 If you say yes here then you get support for hardware monitoring 2411 features of the VIA VT1211 Super-I/O chip. 2412 2413 This driver can also be built as a module. If so, the module 2414 will be called vt1211. 2415 2416config SENSORS_VT8231 2417 tristate "VIA VT8231" 2418 depends on PCI && HAS_IOPORT 2419 select HWMON_VID 2420 help 2421 If you say yes here then you get support for the integrated sensors 2422 in the VIA VT8231 device. 2423 2424 This driver can also be built as a module. If so, the module 2425 will be called vt8231. 2426 2427config SENSORS_W83773G 2428 tristate "Nuvoton W83773G" 2429 depends on I2C 2430 select REGMAP_I2C 2431 help 2432 If you say yes here you get support for the Nuvoton W83773G hardware 2433 monitoring chip. 2434 2435 This driver can also be built as a module. If so, the module 2436 will be called w83773g. 2437 2438config SENSORS_W83781D 2439 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 2440 depends on I2C 2441 select HWMON_VID 2442 help 2443 If you say yes here you get support for the Winbond W8378x series 2444 of sensor chips: the W83781D, W83782D and W83783S, and the similar 2445 Asus AS99127F. 2446 2447 This driver can also be built as a module. If so, the module 2448 will be called w83781d. 2449 2450config SENSORS_W83791D 2451 tristate "Winbond W83791D" 2452 depends on I2C 2453 select HWMON_VID 2454 help 2455 If you say yes here you get support for the Winbond W83791D chip. 2456 2457 This driver can also be built as a module. If so, the module 2458 will be called w83791d. 2459 2460config SENSORS_W83792D 2461 tristate "Winbond W83792D" 2462 depends on I2C 2463 help 2464 If you say yes here you get support for the Winbond W83792D chip. 2465 2466 This driver can also be built as a module. If so, the module 2467 will be called w83792d. 2468 2469config SENSORS_W83793 2470 tristate "Winbond W83793" 2471 depends on I2C 2472 select HWMON_VID 2473 help 2474 If you say yes here you get support for the Winbond W83793 2475 hardware monitoring chip, including support for the integrated 2476 watchdog. 2477 2478 This driver can also be built as a module. If so, the module 2479 will be called w83793. 2480 2481config SENSORS_W83795 2482 tristate "Winbond/Nuvoton W83795G/ADG" 2483 depends on I2C 2484 help 2485 If you say yes here you get support for the Winbond W83795G and 2486 W83795ADG hardware monitoring chip, including manual fan speed 2487 control. 2488 2489 This driver can also be built as a module. If so, the module 2490 will be called w83795. 2491 2492config SENSORS_W83795_FANCTRL 2493 bool "Include automatic fan control support" 2494 depends on SENSORS_W83795 2495 help 2496 If you say yes here, support for automatic fan speed control 2497 will be included in the driver. 2498 2499 Please also note that this option will create sysfs attribute 2500 files which may change in the future, so you shouldn't rely 2501 on them being stable. 2502 2503config SENSORS_W83L785TS 2504 tristate "Winbond W83L785TS-S" 2505 depends on I2C 2506 help 2507 If you say yes here you get support for the Winbond W83L785TS-S 2508 sensor chip, which is used on the Asus A7N8X, among other 2509 motherboards. 2510 2511 This driver can also be built as a module. If so, the module 2512 will be called w83l785ts. 2513 2514config SENSORS_W83L786NG 2515 tristate "Winbond W83L786NG, W83L786NR" 2516 depends on I2C 2517 help 2518 If you say yes here you get support for the Winbond W83L786NG 2519 and W83L786NR sensor chips. 2520 2521 This driver can also be built as a module. If so, the module 2522 will be called w83l786ng. 2523 2524config SENSORS_W83627HF 2525 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 2526 depends on HAS_IOPORT 2527 depends on !PPC 2528 select HWMON_VID 2529 help 2530 If you say yes here you get support for the Winbond W836X7 series 2531 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 2532 W83697HF. 2533 2534 This driver can also be built as a module. If so, the module 2535 will be called w83627hf. 2536 2537config SENSORS_W83627EHF 2538 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" 2539 depends on HAS_IOPORT 2540 depends on !PPC 2541 select HWMON_VID 2542 help 2543 If you say yes here you get support for the hardware 2544 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 2545 2546 This driver also supports the W83627EHG, which is the lead-free 2547 version of the W83627EHF, and the W83627DHG, which is a similar 2548 chip suited for specific Intel processors that use PECI such as 2549 the Core 2 Duo. And also the W83627UHG, which is a stripped down 2550 version of the W83627DHG (as far as hardware monitoring goes.) 2551 2552 This driver also supports Nuvoton W83667HG and W83667HG-B. 2553 2554 This driver can also be built as a module. If so, the module 2555 will be called w83627ehf. 2556 2557config SENSORS_WM831X 2558 tristate "WM831x PMICs" 2559 depends on MFD_WM831X 2560 help 2561 If you say yes here you get support for the hardware 2562 monitoring functionality of the Wolfson Microelectronics 2563 WM831x series of PMICs. 2564 2565 This driver can also be built as a module. If so, the module 2566 will be called wm831x-hwmon. 2567 2568config SENSORS_WM8350 2569 tristate "Wolfson Microelectronics WM835x" 2570 depends on MFD_WM8350 2571 help 2572 If you say yes here you get support for the hardware 2573 monitoring features of the WM835x series of PMICs. 2574 2575 This driver can also be built as a module. If so, the module 2576 will be called wm8350-hwmon. 2577 2578config SENSORS_ULTRA45 2579 tristate "Sun Ultra45 PIC16F747" 2580 depends on SPARC64 2581 help 2582 This driver provides support for the Ultra45 workstation environmental 2583 sensors. 2584 2585config SENSORS_XGENE 2586 tristate "APM X-Gene SoC hardware monitoring driver" 2587 depends on XGENE_SLIMPRO_MBOX || PCC 2588 help 2589 If you say yes here you get support for the temperature 2590 and power sensors for APM X-Gene SoC. 2591 2592config SENSORS_INTEL_M10_BMC_HWMON 2593 tristate "Intel MAX10 BMC Hardware Monitoring" 2594 depends on MFD_INTEL_M10_BMC_CORE 2595 help 2596 This driver provides support for the hardware monitoring functionality 2597 on Intel MAX10 BMC chip. 2598 2599 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its 2600 sensors monitor various telemetry data of different components on the 2601 card, e.g. board temperature, FPGA core temperature/voltage/current. 2602 2603if ACPI 2604 2605comment "ACPI drivers" 2606 2607config SENSORS_ACPI_POWER 2608 tristate "ACPI 4.0 power meter" 2609 help 2610 This driver exposes ACPI 4.0 power meters as hardware monitoring 2611 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware 2612 and a power meter. 2613 2614 To compile this driver as a module, choose M here: 2615 the module will be called acpi_power_meter. 2616 2617config SENSORS_ATK0110 2618 tristate "ASUS ATK0110" 2619 depends on X86 2620 help 2621 If you say yes here you get support for the ACPI hardware 2622 monitoring interface found in many ASUS motherboards. This 2623 driver will provide readings of fans, voltages and temperatures 2624 through the system firmware. 2625 2626 This driver can also be built as a module. If so, the module 2627 will be called asus_atk0110. 2628 2629config SENSORS_ASUS_WMI 2630 tristate "ASUS WMI X370/X470/B450/X399" 2631 depends on ACPI_WMI 2632 help 2633 If you say yes here you get support for the ACPI hardware monitoring 2634 interface found in X370/X470/B450/X399 ASUS motherboards. This driver 2635 will provide readings of fans, voltages and temperatures through the system 2636 firmware. 2637 2638 This driver can also be built as a module. If so, the module 2639 will be called asus_wmi_sensors. 2640 2641config SENSORS_ASUS_EC 2642 tristate "ASUS EC Sensors" 2643 depends on X86 2644 depends on ACPI_EC 2645 help 2646 If you say yes here you get support for the ACPI embedded controller 2647 hardware monitoring interface found in ASUS motherboards. The driver 2648 currently supports B550/X570 boards, although other ASUS boards might 2649 provide this monitoring interface as well. 2650 2651 This driver can also be built as a module. If so, the module 2652 will be called asus_ec_sensors. 2653 2654config SENSORS_HP_WMI 2655 tristate "HP WMI Sensors" 2656 depends on ACPI_WMI 2657 help 2658 If you say yes here you get support for the ACPI hardware monitoring 2659 interface found in HP (and some HP Compaq) business-class computers. 2660 Available sensors vary between systems. Temperature and fan speed 2661 sensors are the most common. 2662 2663 This driver can also be built as a module. If so, the module 2664 will be called hp_wmi_sensors. 2665 2666endif # ACPI 2667 2668endif # HWMON 2669