xref: /linux-6.15/drivers/gpu/drm/panel/Kconfig (revision d5658db2) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TH101MB31UIG002_28A
71	tristate "Boe TH101MB31UIG002-28A panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to enable support for Boe
77	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
78	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
79	  interface to the host and has a built-in LED backlight.
80
81config DRM_PANEL_BOE_TV101WUM_NL6
82	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
83	depends on OF
84	depends on DRM_MIPI_DSI
85	depends on BACKLIGHT_CLASS_DEVICE
86	help
87	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
88	  45NA WUXGA PANEL DSI Video Mode panel
89
90config DRM_PANEL_BOE_TV101WUM_LL2
91	tristate "BOE TV101WUM LL2 1200x1920 panel"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to support for BOE TV101WUM-LL2
97	  WUXGA PANEL DSI Video Mode panel
98
99config DRM_PANEL_EBBG_FT8719
100	tristate "EBBG FT8719 panel driver"
101	depends on OF
102	depends on DRM_MIPI_DSI
103	depends on BACKLIGHT_CLASS_DEVICE
104	help
105	  Say Y here if you want to enable support for the EBBG FT8719
106	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
107	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
108	  interface to the host.
109
110config DRM_PANEL_ELIDA_KD35T133
111	tristate "Elida KD35T133 panel driver"
112	depends on OF
113	depends on DRM_MIPI_DSI
114	depends on BACKLIGHT_CLASS_DEVICE
115	help
116	  Say Y here if you want to enable support for the Elida
117	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
118	  system interfaces.
119
120config DRM_PANEL_FEIXIN_K101_IM2BA02
121	tristate "Feixin K101 IM2BA02 panel"
122	depends on OF
123	depends on DRM_MIPI_DSI
124	depends on BACKLIGHT_CLASS_DEVICE
125	help
126	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
127	  4-lane 800x1280 MIPI DSI panel.
128
129config DRM_PANEL_FEIYANG_FY07024DI26A30D
130	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  Say Y if you want to enable support for panels based on the
136	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
137
138config DRM_PANEL_DSI_CM
139	tristate "Generic DSI command mode panels"
140	depends on OF
141	depends on DRM_MIPI_DSI
142	depends on BACKLIGHT_CLASS_DEVICE
143	help
144	  DRM panel driver for DSI command mode panels with support for
145	  embedded and external backlights.
146
147config DRM_PANEL_LVDS
148	tristate "Generic LVDS panel driver"
149	depends on OF
150	depends on BACKLIGHT_CLASS_DEVICE
151	select VIDEOMODE_HELPERS
152	help
153	  This driver supports LVDS panels that don't require device-specific
154	  handling of power supplies or control signals. It implements automatic
155	  backlight handling if the panel is attached to a backlight controller.
156
157config DRM_PANEL_HIMAX_HX83102
158	tristate "Himax HX83102-based panels"
159	depends on OF
160	depends on DRM_MIPI_DSI
161	depends on BACKLIGHT_CLASS_DEVICE
162	help
163	  Say Y if you want to enable support for panels based on the
164	  Himax HX83102 controller.
165
166config DRM_PANEL_HIMAX_HX83112A
167	tristate "Himax HX83112A-based DSI panel"
168	depends on OF
169	depends on DRM_MIPI_DSI
170	depends on BACKLIGHT_CLASS_DEVICE
171	select DRM_KMS_HELPER
172	help
173	  Say Y here if you want to enable support for Himax HX83112A-based
174	  display panels, such as the one found in the Fairphone 4 smartphone.
175
176config DRM_PANEL_HIMAX_HX8394
177	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
178	depends on OF
179	depends on DRM_MIPI_DSI
180	depends on BACKLIGHT_CLASS_DEVICE
181	help
182	  Say Y if you want to enable support for panels based on the
183	  Himax HX8394 controller, such as the HannStar HSD060BHW4
184	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
185
186	  If M is selected the module will be called panel-himax-hx8394.
187
188config DRM_PANEL_ILITEK_IL9322
189	tristate "Ilitek ILI9322 320x240 QVGA panels"
190	depends on OF && SPI
191	select REGMAP
192	help
193	  Say Y here if you want to enable support for Ilitek IL9322
194	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
195
196config DRM_PANEL_ILITEK_ILI9341
197	tristate "Ilitek ILI9341 240x320 QVGA panels"
198	depends on SPI
199	select DRM_KMS_HELPER
200	select DRM_GEM_DMA_HELPER
201	depends on BACKLIGHT_CLASS_DEVICE
202	select DRM_MIPI_DBI
203	help
204	  Say Y here if you want to enable support for Ilitek IL9341
205	  QVGA (240x320) RGB panels. support serial & parallel rgb
206	  interface.
207
208config DRM_PANEL_ILITEK_ILI9805
209	tristate "Ilitek ILI9805-based panels"
210	depends on OF
211	depends on DRM_MIPI_DSI
212	depends on BACKLIGHT_CLASS_DEVICE
213	help
214	  Say Y if you want to enable support for panels based on the
215	  Ilitek ILI9805 controller.
216
217config DRM_PANEL_ILITEK_ILI9806E
218	tristate "Ilitek ILI9806E-based panels"
219	depends on OF
220	depends on DRM_MIPI_DSI
221	depends on BACKLIGHT_CLASS_DEVICE
222	help
223	  Say Y if you want to enable support for panels based on the
224	  Ilitek ILI9806E controller.
225
226config DRM_PANEL_ILITEK_ILI9881C
227	tristate "Ilitek ILI9881C-based panels"
228	depends on OF
229	depends on DRM_MIPI_DSI
230	depends on BACKLIGHT_CLASS_DEVICE
231	help
232	  Say Y if you want to enable support for panels based on the
233	  Ilitek ILI9881c controller.
234
235config DRM_PANEL_ILITEK_ILI9882T
236	tristate "Ilitek ILI9882t-based panels"
237	depends on OF
238	depends on DRM_MIPI_DSI
239	depends on BACKLIGHT_CLASS_DEVICE
240	help
241	  Say Y if you want to enable support for panels based on the
242	  Ilitek ILI9882t controller.
243
244config DRM_PANEL_INNOLUX_EJ030NA
245        tristate "Innolux EJ030NA 320x480 LCD panel"
246        depends on OF && SPI
247        select REGMAP_SPI
248        help
249          Say Y here to enable support for the Innolux/Chimei EJ030NA
250          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
251          and LDK handheld gaming consoles.
252
253config DRM_PANEL_INNOLUX_P079ZCA
254	tristate "Innolux P079ZCA panel"
255	depends on OF
256	depends on DRM_MIPI_DSI
257	depends on BACKLIGHT_CLASS_DEVICE
258	help
259	  Say Y here if you want to enable support for Innolux P079ZCA
260	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
261	  24 bit RGB per pixel. It provides a MIPI DSI interface to
262	  the host and has a built-in LED backlight.
263
264config DRM_PANEL_JADARD_JD9365DA_H3
265	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
266	depends on OF
267	depends on DRM_MIPI_DSI
268	depends on BACKLIGHT_CLASS_DEVICE
269	help
270	  Say Y here if you want to enable support for Jadard JD9365DA-H3
271	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
272	  800RGBx1280 dots at maximum.
273
274config DRM_PANEL_JDI_LPM102A188A
275	tristate "JDI LPM102A188A DSI panel"
276	depends on OF && GPIOLIB
277	depends on DRM_MIPI_DSI
278	depends on BACKLIGHT_CLASS_DEVICE
279	help
280	  Say Y here if you want to enable support for JDI LPM102A188A DSI
281	  command mode panel as found in Google Pixel C devices.
282	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
283	  to the host.
284
285config DRM_PANEL_JDI_LT070ME05000
286	tristate "JDI LT070ME05000 WUXGA DSI panel"
287	depends on OF
288	depends on DRM_MIPI_DSI
289	depends on BACKLIGHT_CLASS_DEVICE
290	help
291	  Say Y here if you want to enable support for JDI DSI video mode
292	  panel as found in Google Nexus 7 (2013) devices.
293	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
294	  24 bit per pixel.
295
296config DRM_PANEL_JDI_R63452
297	tristate "JDI R63452 Full HD DSI panel"
298	depends on OF
299	depends on DRM_MIPI_DSI
300	depends on BACKLIGHT_CLASS_DEVICE
301	help
302	  Say Y here if you want to enable support for the JDI R63452
303	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
304
305config DRM_PANEL_KHADAS_TS050
306	tristate "Khadas TS050 panel"
307	depends on OF
308	depends on DRM_MIPI_DSI
309	depends on BACKLIGHT_CLASS_DEVICE
310	help
311	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
312	  panel module. The panel has a 1080x1920 resolution and uses
313	  24 bit RGB per pixel. It provides a MIPI DSI interface to
314	  the host, a built-in LED backlight and touch controller.
315
316config DRM_PANEL_KINGDISPLAY_KD097D04
317	tristate "Kingdisplay kd097d04 panel"
318	depends on OF
319	depends on DRM_MIPI_DSI
320	depends on BACKLIGHT_CLASS_DEVICE
321	help
322	  Say Y here if you want to enable support for Kingdisplay kd097d04
323	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
324	  24 bit RGB per pixel. It provides a MIPI DSI interface to
325	  the host and has a built-in LED backlight.
326
327config DRM_PANEL_LEADTEK_LTK050H3146W
328	tristate "Leadtek LTK050H3146W panel"
329	depends on OF
330	depends on DRM_MIPI_DSI
331	depends on BACKLIGHT_CLASS_DEVICE
332	help
333	  Say Y here if you want to enable support for Leadtek LTK050H3146W
334	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
335	  24 bit RGB per pixel. It provides a MIPI DSI interface to
336	  the host and has a built-in LED backlight.
337
338config DRM_PANEL_LEADTEK_LTK500HD1829
339	tristate "Leadtek LTK500HD1829 panel"
340	depends on OF
341	depends on DRM_MIPI_DSI
342	depends on BACKLIGHT_CLASS_DEVICE
343	help
344	  Say Y here if you want to enable support for Kingdisplay kd097d04
345	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
346	  24 bit RGB per pixel. It provides a MIPI DSI interface to
347	  the host and has a built-in LED backlight.
348
349config DRM_PANEL_LINCOLNTECH_LCD197
350	tristate "Lincoln Technologies lcd197 panel"
351	depends on OF
352	depends on DRM_MIPI_DSI
353	depends on BACKLIGHT_CLASS_DEVICE
354	help
355	  Say Y here if you want to enable support for lincolntech lcd197
356	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
357	  24 bit RGB per pixel. It provides a MIPI DSI interface to
358	  the host.
359
360config DRM_PANEL_LG_LB035Q02
361	tristate "LG LB035Q024573 RGB panel"
362	depends on GPIOLIB && OF && SPI
363	help
364	  Say Y here if you want to enable support for the LB035Q02 RGB panel
365	  (found on the Gumstix Overo Palo35 board). To compile this driver as
366	  a module, choose M here.
367
368config DRM_PANEL_LG_LG4573
369	tristate "LG4573 RGB/SPI panel"
370	depends on OF && SPI
371	select VIDEOMODE_HELPERS
372	help
373	  Say Y here if you want to enable support for LG4573 RGB panel.
374	  To compile this driver as a module, choose M here.
375
376config DRM_PANEL_LG_SW43408
377	tristate "LG SW43408 panel"
378	depends on OF
379	depends on DRM_MIPI_DSI
380	depends on BACKLIGHT_CLASS_DEVICE
381	select DRM_DISPLAY_DSC_HELPER
382	select DRM_DISPLAY_HELPER
383	help
384	  Say Y here if you want to enable support for LG sw43408 panel.
385	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
386	  pixel. It provides a MIPI DSI interface to the host and has a
387	  built-in LED backlight.
388
389config DRM_PANEL_MAGNACHIP_D53E6EA8966
390	tristate "Magnachip D53E6EA8966 DSI panel"
391	depends on OF && SPI
392	depends on DRM_MIPI_DSI
393	depends on BACKLIGHT_CLASS_DEVICE
394	select DRM_MIPI_DBI
395	help
396	  DRM panel driver for the Samsung AMS495QA01 panel controlled
397	  with the Magnachip D53E6EA8966 panel IC. This panel receives
398	  video data via DSI but commands via 9-bit SPI using DBI.
399
400config DRM_PANEL_MANTIX_MLAF057WE51
401	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
402	depends on OF
403	depends on DRM_MIPI_DSI
404	depends on BACKLIGHT_CLASS_DEVICE
405	help
406	  Say Y here if you want to enable support for the Mantix
407	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
408	  has a resolution of 720x1440 pixels, a built in backlight and touch
409	  controller.
410
411config DRM_PANEL_NEC_NL8048HL11
412	tristate "NEC NL8048HL11 RGB panel"
413	depends on GPIOLIB && OF && SPI
414	help
415	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
416	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
417	  as a module, choose M here.
418
419config DRM_PANEL_NEWVISION_NV3051D
420	tristate "NewVision NV3051D DSI panel"
421	depends on OF
422	depends on DRM_MIPI_DSI
423	depends on BACKLIGHT_CLASS_DEVICE
424	help
425	  This driver supports the NV3051D based panel found on the Anbernic
426	  RG353P and RG353V.
427
428config DRM_PANEL_NEWVISION_NV3052C
429	tristate "NewVision NV3052C RGB/SPI panel"
430	depends on OF && SPI
431	depends on BACKLIGHT_CLASS_DEVICE
432	select DRM_MIPI_DBI
433	help
434	  Say Y here if you want to enable support for the panels built
435	  around the NewVision NV3052C display controller.
436
437config DRM_PANEL_NOVATEK_NT35510
438	tristate "Novatek NT35510 RGB panel driver"
439	depends on OF
440	depends on DRM_MIPI_DSI
441	depends on BACKLIGHT_CLASS_DEVICE
442	help
443	  Say Y here if you want to enable support for the panels built
444	  around the Novatek NT35510 display controller, such as some
445	  Hydis panels.
446
447config DRM_PANEL_NOVATEK_NT35560
448	tristate "Novatek NT35560 DSI command mode panel"
449	depends on OF
450	depends on DRM_MIPI_DSI
451	depends on BACKLIGHT_CLASS_DEVICE
452	select VIDEOMODE_HELPERS
453	help
454	  Say Y here if you want to enable the Novatek NT35560 display
455	  controller. This panel supports DSI in both command and video
456	  mode. This supports several panels such as Sony ACX424AKM and
457	  ACX424AKP.
458
459config DRM_PANEL_NOVATEK_NT35950
460	tristate "Novatek NT35950 DSI panel"
461	depends on OF
462	depends on DRM_MIPI_DSI
463	depends on BACKLIGHT_CLASS_DEVICE
464	help
465	  Say Y here if you want to enable support for the panels built
466	  around the Novatek NT35950 display controller, such as some
467	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
468	  mobile phones.
469
470config DRM_PANEL_NOVATEK_NT36523
471	tristate "Novatek NT36523 panel driver"
472	depends on OF
473	depends on DRM_MIPI_DSI
474	depends on BACKLIGHT_CLASS_DEVICE
475	help
476	  Say Y here if you want to enable support for the panels built
477	  around the Novatek NT36523 display controller, such as some
478	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
479
480config DRM_PANEL_NOVATEK_NT36672A
481	tristate "Novatek NT36672A DSI panel"
482	depends on OF
483	depends on DRM_MIPI_DSI
484	depends on BACKLIGHT_CLASS_DEVICE
485	help
486	  Say Y here if you want to enable support for the panels built
487	  around the Novatek NT36672A display controller, such as some
488	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
489
490config DRM_PANEL_NOVATEK_NT36672E
491	tristate "Novatek NT36672E DSI panel"
492	depends on OF
493	depends on DRM_MIPI_DSI
494	depends on BACKLIGHT_CLASS_DEVICE
495	help
496	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
497	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
498	  RGB per pixel.
499
500config DRM_PANEL_NOVATEK_NT39016
501	tristate "Novatek NT39016 RGB/SPI panel"
502	depends on OF && SPI
503	depends on BACKLIGHT_CLASS_DEVICE
504	select REGMAP_SPI
505	help
506	  Say Y here if you want to enable support for the panels built
507	  around the Novatek NT39016 display controller.
508
509config DRM_PANEL_OLIMEX_LCD_OLINUXINO
510	tristate "Olimex LCD-OLinuXino panel"
511	depends on OF
512	depends on I2C
513	depends on BACKLIGHT_CLASS_DEVICE
514	select CRC32
515	help
516	  The panel is used with different sizes LCDs, from 480x272 to
517	  1280x800, and 24 bit per pixel.
518
519	  Say Y here if you want to enable support for Olimex Ltd.
520	  LCD-OLinuXino panel.
521
522config DRM_PANEL_ORISETECH_OTA5601A
523        tristate "Orise Technology ota5601a RGB/SPI panel"
524        depends on SPI
525        depends on BACKLIGHT_CLASS_DEVICE
526        select REGMAP_SPI
527        help
528          Say Y here if you want to enable support for the panels built
529          around the Orise Technology OTA9601A display controller.
530
531config DRM_PANEL_ORISETECH_OTM8009A
532	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
533	depends on OF
534	depends on DRM_MIPI_DSI
535	depends on BACKLIGHT_CLASS_DEVICE
536	help
537	  Say Y here if you want to enable support for Orise Technology
538	  otm8009a 480x800 dsi 2dl panel.
539
540config DRM_PANEL_OSD_OSD101T2587_53TS
541	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
542	depends on OF
543	depends on DRM_MIPI_DSI
544	depends on BACKLIGHT_CLASS_DEVICE
545	help
546	  Say Y here if you want to enable support for One Stop Displays
547	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
548
549config DRM_PANEL_PANASONIC_VVX10F034N00
550	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
551	depends on OF
552	depends on DRM_MIPI_DSI
553	depends on BACKLIGHT_CLASS_DEVICE
554	help
555	  Say Y here if you want to enable support for Panasonic VVX10F034N00
556	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
557	  Xperia Z2 tablets
558
559config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
560	tristate "Raspberry Pi 7-inch touchscreen panel"
561	depends on DRM_MIPI_DSI
562	help
563	  Say Y here if you want to enable support for the Raspberry
564	  Pi 7" Touchscreen.  To compile this driver as a module,
565	  choose M here.
566
567config DRM_PANEL_RAYDIUM_RM67191
568	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
569	depends on OF
570	depends on DRM_MIPI_DSI
571	depends on BACKLIGHT_CLASS_DEVICE
572	help
573	  Say Y here if you want to enable support for Raydium RM67191 FHD
574	  (1080x1920) DSI panel.
575
576config DRM_PANEL_RAYDIUM_RM68200
577	tristate "Raydium RM68200 720x1280 DSI video mode panel"
578	depends on OF
579	depends on DRM_MIPI_DSI
580	depends on BACKLIGHT_CLASS_DEVICE
581	help
582	  Say Y here if you want to enable support for Raydium RM68200
583	  720x1280 DSI video mode panel.
584
585config DRM_PANEL_RAYDIUM_RM692E5
586	tristate "Raydium RM692E5-based DSI panel"
587	depends on OF
588	depends on DRM_MIPI_DSI
589	depends on BACKLIGHT_CLASS_DEVICE
590	select DRM_DISPLAY_DSC_HELPER
591	select DRM_DISPLAY_HELPER
592	help
593	  Say Y here if you want to enable support for Raydium RM692E5-based
594	  display panels, such as the one found in the Fairphone 5 smartphone.
595
596config DRM_PANEL_RAYDIUM_RM69380
597	tristate "Raydium RM69380-based DSI panel"
598	depends on OF && GPIOLIB
599	depends on DRM_MIPI_DSI
600	depends on BACKLIGHT_CLASS_DEVICE
601	help
602	  Say Y here if you want to enable support for Raydium RM69380-based
603	  display panels.
604
605	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
606	  in combination with an EDO OLED panel.
607
608config DRM_PANEL_RONBO_RB070D30
609	tristate "Ronbo Electronics RB070D30 panel"
610	depends on OF
611	depends on DRM_MIPI_DSI
612	depends on BACKLIGHT_CLASS_DEVICE
613	help
614	  Say Y here if you want to enable support for Ronbo Electronics
615	  RB070D30 1024x600 DSI panel.
616
617config DRM_PANEL_SAMSUNG_AMS581VF01
618	tristate "Samsung AMS581VF01 panel"
619	depends on OF
620	depends on DRM_MIPI_DSI
621	depends on BACKLIGHT_CLASS_DEVICE
622	help
623	  Say Y or M here if you want to enable support for the
624	  Samsung AMS581VF01 FHD Plus (2340x1080@60Hz) CMD mode panel.
625
626config DRM_PANEL_SAMSUNG_AMS639RQ08
627	tristate "Samsung AMS639RQ08 panel"
628	depends on OF
629	depends on DRM_MIPI_DSI
630	depends on BACKLIGHT_CLASS_DEVICE
631	help
632	  Say Y or M here if you want to enable support for the
633	  Samsung AMS639RQ08 FHD Plus (2340x1080@60Hz) CMD mode panel.
634
635config DRM_PANEL_SAMSUNG_S6E88A0_AMS427AP24
636	tristate "Samsung AMS427AP24 panel with S6E88A0 controller"
637	depends on GPIOLIB && OF && REGULATOR
638	depends on DRM_MIPI_DSI
639	help
640	  Say Y here if you want to enable support for Samsung AMS427AP24 panel
641	  with S6E88A0 controller (found in Samsung Galaxy S4 Mini Value Edition
642	  GT-I9195I). To compile this driver as a module, choose M here.
643
644config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
645	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
646	depends on OF
647	select DRM_MIPI_DSI
648	select VIDEOMODE_HELPERS
649
650config DRM_PANEL_SAMSUNG_ATNA33XC20
651	tristate "Samsung ATNA33XC20 eDP panel"
652	depends on OF
653	depends on BACKLIGHT_CLASS_DEVICE
654	depends on PM
655	select DRM_DISPLAY_DP_HELPER
656	select DRM_DISPLAY_HELPER
657	select DRM_DISPLAY_DP_AUX_BUS
658	help
659	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
660	  be handled by the DRM_PANEL_SIMPLE driver because its power
661	  sequencing is non-standard.
662
663config DRM_PANEL_SAMSUNG_DB7430
664	tristate "Samsung DB7430-based DPI panels"
665	depends on OF && SPI && GPIOLIB
666	depends on BACKLIGHT_CLASS_DEVICE
667	select DRM_MIPI_DBI
668	help
669	  Say Y here if you want to enable support for the Samsung
670	  DB7430 DPI display controller used in such devices as the
671	  LMS397KF04 480x800 DPI panel.
672
673config DRM_PANEL_SAMSUNG_LD9040
674	tristate "Samsung LD9040 RGB/SPI panel"
675	depends on OF && SPI
676	depends on BACKLIGHT_CLASS_DEVICE
677	select VIDEOMODE_HELPERS
678
679config DRM_PANEL_SAMSUNG_S6E3FA7
680	tristate "Samsung S6E3FA7 panel driver"
681	depends on OF
682	depends on DRM_MIPI_DSI
683	depends on BACKLIGHT_CLASS_DEVICE
684	help
685	  Say Y here if you want to enable support for the Samsung S6E3FA7
686	  1920x2220 panel.
687
688config DRM_PANEL_SAMSUNG_S6D16D0
689	tristate "Samsung S6D16D0 DSI video mode panel"
690	depends on OF
691	depends on DRM_MIPI_DSI
692	select VIDEOMODE_HELPERS
693
694config DRM_PANEL_SAMSUNG_S6D27A1
695	tristate "Samsung S6D27A1 DPI panel driver"
696	depends on OF && SPI && GPIOLIB
697	select DRM_MIPI_DBI
698	help
699	  Say Y here if you want to enable support for the Samsung
700	  S6D27A1 DPI 480x800 panel.
701
702	  This panel can be found in Samsung Galaxy Ace 2
703	  GT-I8160 mobile phone.
704
705config DRM_PANEL_SAMSUNG_S6D7AA0
706	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
707	depends on OF
708	depends on BACKLIGHT_CLASS_DEVICE
709	select DRM_MIPI_DSI
710	select VIDEOMODE_HELPERS
711
712config DRM_PANEL_SAMSUNG_S6E3HA2
713	tristate "Samsung S6E3HA2 DSI video mode panel"
714	depends on OF
715	depends on DRM_MIPI_DSI
716	depends on BACKLIGHT_CLASS_DEVICE
717	select VIDEOMODE_HELPERS
718
719config DRM_PANEL_SAMSUNG_S6E3HA8
720	tristate "Samsung S6E3HA8 DSI video mode panel"
721	depends on OF
722	depends on DRM_MIPI_DSI
723	depends on BACKLIGHT_CLASS_DEVICE
724	select DRM_DISPLAY_DSC_HELPER
725	select VIDEOMODE_HELPERS
726
727config DRM_PANEL_SAMSUNG_S6E63J0X03
728	tristate "Samsung S6E63J0X03 DSI command mode panel"
729	depends on OF
730	depends on DRM_MIPI_DSI
731	depends on BACKLIGHT_CLASS_DEVICE
732	select VIDEOMODE_HELPERS
733
734config DRM_PANEL_SAMSUNG_S6E63M0
735	tristate "Samsung S6E63M0 RGB panel"
736	depends on OF
737	depends on BACKLIGHT_CLASS_DEVICE
738	help
739	  Say Y here if you want to enable support for Samsung S6E63M0
740	  AMOLED LCD panel. This panel can be accessed using SPI or
741	  DSI.
742
743config DRM_PANEL_SAMSUNG_S6E63M0_SPI
744	tristate "Samsung S6E63M0 RGB SPI interface"
745	depends on SPI
746	depends on DRM_PANEL_SAMSUNG_S6E63M0
747	default DRM_PANEL_SAMSUNG_S6E63M0
748	select DRM_MIPI_DBI
749	help
750	  Say Y here if you want to be able to access the Samsung
751	  S6E63M0 panel using SPI.
752
753config DRM_PANEL_SAMSUNG_S6E63M0_DSI
754	tristate "Samsung S6E63M0 RGB DSI interface"
755	depends on DRM_MIPI_DSI
756	depends on DRM_PANEL_SAMSUNG_S6E63M0
757	help
758	  Say Y here if you want to be able to access the Samsung
759	  S6E63M0 panel using DSI.
760
761config DRM_PANEL_SAMSUNG_S6E8AA0
762	tristate "Samsung S6E8AA0 DSI video mode panel"
763	depends on OF
764	select DRM_MIPI_DSI
765	select VIDEOMODE_HELPERS
766
767config DRM_PANEL_SAMSUNG_SOFEF00
768	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
769	depends on OF
770	depends on DRM_MIPI_DSI
771	depends on BACKLIGHT_CLASS_DEVICE
772	select VIDEOMODE_HELPERS
773	help
774	  Say Y or M here if you want to enable support for the Samsung AMOLED
775	  command mode panels found in the OnePlus 6/6T smartphones.
776
777	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
778
779config DRM_PANEL_SEIKO_43WVF1G
780	tristate "Seiko 43WVF1G panel"
781	depends on OF
782	depends on BACKLIGHT_CLASS_DEVICE
783	select VIDEOMODE_HELPERS
784	help
785	  Say Y here if you want to enable support for the Seiko
786	  43WVF1G controller for 800x480 LCD panels
787
788config DRM_PANEL_SHARP_LQ101R1SX01
789	tristate "Sharp LQ101R1SX01 panel"
790	depends on OF
791	depends on DRM_MIPI_DSI
792	depends on BACKLIGHT_CLASS_DEVICE
793	help
794	  Say Y here if you want to enable support for Sharp LQ101R1SX01
795	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
796	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
797	  the host and has a built-in LED backlight.
798
799	  To compile this driver as a module, choose M here: the module
800	  will be called panel-sharp-lq101r1sx01.
801
802config DRM_PANEL_SHARP_LS037V7DW01
803	tristate "Sharp LS037V7DW01 VGA LCD panel"
804	depends on GPIOLIB && OF && REGULATOR
805	help
806	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
807	  (480x640) LCD panel (found on the TI SDP3430 board).
808
809config DRM_PANEL_SHARP_LS043T1LE01
810	tristate "Sharp LS043T1LE01 qHD video mode panel"
811	depends on OF
812	depends on DRM_MIPI_DSI
813	depends on BACKLIGHT_CLASS_DEVICE
814	help
815	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
816	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
817
818config DRM_PANEL_SHARP_LS060T1SX01
819	tristate "Sharp LS060T1SX01 FullHD video mode panel"
820	depends on OF
821	depends on DRM_MIPI_DSI
822	depends on BACKLIGHT_CLASS_DEVICE
823	help
824	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
825	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
826	  Bundle.
827
828config DRM_PANEL_SITRONIX_ST7701
829	tristate "Sitronix ST7701 panel driver"
830	depends on OF
831	depends on SPI || DRM_MIPI_DSI
832	select DRM_MIPI_DBI if SPI
833	depends on BACKLIGHT_CLASS_DEVICE
834	help
835	  Say Y here if you want to enable support for the Sitronix
836	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
837	  system interfaces.
838
839config DRM_PANEL_SITRONIX_ST7703
840	tristate "Sitronix ST7703 based MIPI touchscreen panels"
841	depends on OF
842	depends on DRM_MIPI_DSI
843	depends on BACKLIGHT_CLASS_DEVICE
844	help
845	  Say Y here if you want to enable support for Sitronix ST7703 based
846	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
847	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
848	  in backlight and touch controller.
849	  Touch input support is provided by the goodix driver and needs to be
850	  selected separately.
851
852config DRM_PANEL_SITRONIX_ST7789V
853	tristate "Sitronix ST7789V panel"
854	depends on OF && SPI
855	depends on BACKLIGHT_CLASS_DEVICE
856	help
857	  Say Y here if you want to enable support for the Sitronix
858	  ST7789V controller for 240x320 LCD panels
859
860config DRM_PANEL_SONY_ACX565AKM
861	tristate "Sony ACX565AKM panel"
862	depends on GPIOLIB && OF && SPI
863	depends on BACKLIGHT_CLASS_DEVICE
864	help
865	  Say Y here if you want to enable support for the Sony ACX565AKM
866	  800x600 3.5" panel (found on the Nokia N900).
867
868config DRM_PANEL_SONY_TD4353_JDI
869	tristate "Sony TD4353 JDI panel"
870	depends on GPIOLIB && OF
871	depends on DRM_MIPI_DSI
872	depends on BACKLIGHT_CLASS_DEVICE
873	help
874	  Say Y here if you want to enable support for the Sony Tama
875	  TD4353 JDI command mode panel as found on some Sony Xperia
876	  XZ2 and XZ2 Compact smartphones.
877
878config DRM_PANEL_SONY_TULIP_TRULY_NT35521
879	tristate "Sony Tulip Truly NT35521 panel"
880	depends on GPIOLIB && OF
881	depends on DRM_MIPI_DSI
882	depends on BACKLIGHT_CLASS_DEVICE
883	help
884	  Say Y here if you want to enable support for the Sony Tulip
885	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
886	  Aqua phone.
887
888config DRM_PANEL_STARTEK_KD070FHFID015
889	tristate "STARTEK KD070FHFID015 panel"
890	depends on OF
891	depends on DRM_MIPI_DSI
892	depends on BACKLIGHT_CLASS_DEVICE
893	help
894	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
895	  based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
896	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
897	  the host, a built-in LED backlight and touch controller.
898
899config DRM_PANEL_EDP
900	tristate "support for simple Embedded DisplayPort panels"
901	depends on OF
902	depends on BACKLIGHT_CLASS_DEVICE
903	depends on PM
904	select VIDEOMODE_HELPERS
905	select DRM_DISPLAY_DP_HELPER
906	select DRM_DISPLAY_HELPER
907	select DRM_DISPLAY_DP_AUX_BUS
908	select DRM_KMS_HELPER
909	help
910	  DRM panel driver for dumb eDP panels that need at most a regulator and
911	  a GPIO to be powered up. Optionally a backlight can be attached so
912	  that it can be automatically turned off when the panel goes into a
913	  low power state.
914
915config DRM_PANEL_SIMPLE
916	tristate "support for simple panels (other than eDP ones)"
917	depends on OF
918	depends on BACKLIGHT_CLASS_DEVICE
919	depends on PM
920	select VIDEOMODE_HELPERS
921	help
922	  DRM panel driver for dumb non-eDP panels that need at most a regulator
923	  and a GPIO to be powered up. Optionally a backlight can be attached so
924	  that it can be automatically turned off when the panel goes into a
925	  low power state.
926
927config DRM_PANEL_SYNAPTICS_R63353
928	tristate "Synaptics R63353-based panels"
929	depends on OF
930	depends on DRM_MIPI_DSI
931	depends on BACKLIGHT_CLASS_DEVICE
932	help
933	  Say Y if you want to enable support for panels based on the
934	  Synaptics R63353 controller.
935
936config DRM_PANEL_TDO_TL070WSH30
937	tristate "TDO TL070WSH30 DSI panel"
938	depends on OF
939	depends on DRM_MIPI_DSI
940	depends on BACKLIGHT_CLASS_DEVICE
941	help
942	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
943	  panel module. The panel has a 1024×600 resolution and uses
944	  24 bit RGB per pixel. It provides a MIPI DSI interface to
945	  the host, a built-in LED backlight and touch controller.
946
947config DRM_PANEL_TPO_TD028TTEC1
948	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
949	depends on OF && SPI
950	depends on BACKLIGHT_CLASS_DEVICE
951	help
952	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
953	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
954
955config DRM_PANEL_TPO_TD043MTEA1
956	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
957	depends on GPIOLIB && OF && REGULATOR && SPI
958	help
959	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
960	  4.3" panel (found on the OMAP3 Pandora board).
961
962config DRM_PANEL_TPO_TPG110
963	tristate "TPO TPG 800x400 panel"
964	depends on OF && SPI && GPIOLIB
965	depends on BACKLIGHT_CLASS_DEVICE
966	help
967	  Say Y here if you want to enable support for TPO TPG110
968	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
969	  800x400 LCD panels.
970
971config DRM_PANEL_TRULY_NT35597_WQXGA
972	tristate "Truly WQXGA"
973	depends on OF
974	depends on DRM_MIPI_DSI
975	help
976	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
977	  Video Mode panel
978
979config DRM_PANEL_VISIONOX_R66451
980	tristate "Visionox R66451"
981	depends on OF
982	depends on DRM_MIPI_DSI
983	depends on BACKLIGHT_CLASS_DEVICE
984	select DRM_DISPLAY_DSC_HELPER
985	select DRM_DISPLAY_HELPER
986	help
987	  Say Y here if you want to enable support for Visionox
988	  R66451 1080x2340 AMOLED DSI panel.
989
990config DRM_PANEL_VISIONOX_RM69299
991	tristate "Visionox RM69299"
992	depends on OF
993	depends on DRM_MIPI_DSI
994	help
995	  Say Y here if you want to enable support for Visionox
996	  RM69299  DSI Video Mode panel.
997
998config DRM_PANEL_VISIONOX_VTDR6130
999	tristate "Visionox VTDR6130"
1000	depends on OF
1001	depends on DRM_MIPI_DSI
1002	depends on BACKLIGHT_CLASS_DEVICE
1003	help
1004	  Say Y here if you want to enable support for Visionox
1005	  VTDR6130 1080x2400 AMOLED DSI panel.
1006
1007config DRM_PANEL_WIDECHIPS_WS2401
1008	tristate "Widechips WS2401 DPI panel driver"
1009	depends on SPI && GPIOLIB
1010	depends on BACKLIGHT_CLASS_DEVICE
1011	select DRM_MIPI_DBI
1012	help
1013	  Say Y here if you want to enable support for the Widechips WS2401 DPI
1014	  480x800 display controller used in panels such as Samsung LMS380KF01.
1015	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
1016
1017config DRM_PANEL_XINPENG_XPP055C272
1018	tristate "Xinpeng XPP055C272 panel driver"
1019	depends on OF
1020	depends on DRM_MIPI_DSI
1021	depends on BACKLIGHT_CLASS_DEVICE
1022	help
1023	  Say Y here if you want to enable support for the Xinpeng
1024	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
1025	  system interfaces.
1026endmenu
1027