xref: /linux-6.15/drivers/gpu/drm/panel/Kconfig (revision c5207ed4) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TH101MB31UIG002_28A
71	tristate "Boe TH101MB31UIG002-28A panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to enable support for Boe
77	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
78	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
79	  interface to the host and has a built-in LED backlight.
80
81config DRM_PANEL_BOE_TV101WUM_NL6
82	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
83	depends on OF
84	depends on DRM_MIPI_DSI
85	depends on BACKLIGHT_CLASS_DEVICE
86	help
87	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
88	  45NA WUXGA PANEL DSI Video Mode panel
89
90config DRM_PANEL_EBBG_FT8719
91	tristate "EBBG FT8719 panel driver"
92	depends on OF
93	depends on DRM_MIPI_DSI
94	depends on BACKLIGHT_CLASS_DEVICE
95	help
96	  Say Y here if you want to enable support for the EBBG FT8719
97	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
98	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
99	  interface to the host.
100
101config DRM_PANEL_ELIDA_KD35T133
102	tristate "Elida KD35T133 panel driver"
103	depends on OF
104	depends on DRM_MIPI_DSI
105	depends on BACKLIGHT_CLASS_DEVICE
106	help
107	  Say Y here if you want to enable support for the Elida
108	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
109	  system interfaces.
110
111config DRM_PANEL_FEIXIN_K101_IM2BA02
112	tristate "Feixin K101 IM2BA02 panel"
113	depends on OF
114	depends on DRM_MIPI_DSI
115	depends on BACKLIGHT_CLASS_DEVICE
116	help
117	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
118	  4-lane 800x1280 MIPI DSI panel.
119
120config DRM_PANEL_FEIYANG_FY07024DI26A30D
121	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
122	depends on OF
123	depends on DRM_MIPI_DSI
124	depends on BACKLIGHT_CLASS_DEVICE
125	help
126	  Say Y if you want to enable support for panels based on the
127	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
128
129config DRM_PANEL_DSI_CM
130	tristate "Generic DSI command mode panels"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  DRM panel driver for DSI command mode panels with support for
136	  embedded and external backlights.
137
138config DRM_PANEL_LVDS
139	tristate "Generic LVDS panel driver"
140	depends on OF
141	depends on BACKLIGHT_CLASS_DEVICE
142	select VIDEOMODE_HELPERS
143	help
144	  This driver supports LVDS panels that don't require device-specific
145	  handling of power supplies or control signals. It implements automatic
146	  backlight handling if the panel is attached to a backlight controller.
147
148config DRM_PANEL_HIMAX_HX83102
149	tristate "Himax HX83102-based panels"
150	depends on OF
151	depends on DRM_MIPI_DSI
152	depends on BACKLIGHT_CLASS_DEVICE
153	help
154	  Say Y if you want to enable support for panels based on the
155	  Himax HX83102 controller.
156
157config DRM_PANEL_HIMAX_HX83112A
158	tristate "Himax HX83112A-based DSI panel"
159	depends on OF
160	depends on DRM_MIPI_DSI
161	depends on BACKLIGHT_CLASS_DEVICE
162	select DRM_KMS_HELPER
163	help
164	  Say Y here if you want to enable support for Himax HX83112A-based
165	  display panels, such as the one found in the Fairphone 4 smartphone.
166
167config DRM_PANEL_HIMAX_HX8394
168	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
169	depends on OF
170	depends on DRM_MIPI_DSI
171	depends on BACKLIGHT_CLASS_DEVICE
172	help
173	  Say Y if you want to enable support for panels based on the
174	  Himax HX8394 controller, such as the HannStar HSD060BHW4
175	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
176
177	  If M is selected the module will be called panel-himax-hx8394.
178
179config DRM_PANEL_ILITEK_IL9322
180	tristate "Ilitek ILI9322 320x240 QVGA panels"
181	depends on OF && SPI
182	select REGMAP
183	help
184	  Say Y here if you want to enable support for Ilitek IL9322
185	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
186
187config DRM_PANEL_ILITEK_ILI9341
188	tristate "Ilitek ILI9341 240x320 QVGA panels"
189	depends on SPI
190	select DRM_KMS_HELPER
191	select DRM_GEM_DMA_HELPER
192	depends on BACKLIGHT_CLASS_DEVICE
193	select DRM_MIPI_DBI
194	help
195	  Say Y here if you want to enable support for Ilitek IL9341
196	  QVGA (240x320) RGB panels. support serial & parallel rgb
197	  interface.
198
199config DRM_PANEL_ILITEK_ILI9805
200	tristate "Ilitek ILI9805-based panels"
201	depends on OF
202	depends on DRM_MIPI_DSI
203	depends on BACKLIGHT_CLASS_DEVICE
204	help
205	  Say Y if you want to enable support for panels based on the
206	  Ilitek ILI9805 controller.
207
208config DRM_PANEL_ILITEK_ILI9881C
209	tristate "Ilitek ILI9881C-based panels"
210	depends on OF
211	depends on DRM_MIPI_DSI
212	depends on BACKLIGHT_CLASS_DEVICE
213	help
214	  Say Y if you want to enable support for panels based on the
215	  Ilitek ILI9881c controller.
216
217config DRM_PANEL_ILITEK_ILI9882T
218	tristate "Ilitek ILI9882t-based panels"
219	depends on OF
220	depends on DRM_MIPI_DSI
221	depends on BACKLIGHT_CLASS_DEVICE
222	help
223	  Say Y if you want to enable support for panels based on the
224	  Ilitek ILI9882t controller.
225
226config DRM_PANEL_INNOLUX_EJ030NA
227        tristate "Innolux EJ030NA 320x480 LCD panel"
228        depends on OF && SPI
229        select REGMAP_SPI
230        help
231          Say Y here to enable support for the Innolux/Chimei EJ030NA
232          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
233          and LDK handheld gaming consoles.
234
235config DRM_PANEL_INNOLUX_P079ZCA
236	tristate "Innolux P079ZCA panel"
237	depends on OF
238	depends on DRM_MIPI_DSI
239	depends on BACKLIGHT_CLASS_DEVICE
240	help
241	  Say Y here if you want to enable support for Innolux P079ZCA
242	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
243	  24 bit RGB per pixel. It provides a MIPI DSI interface to
244	  the host and has a built-in LED backlight.
245
246config DRM_PANEL_JADARD_JD9365DA_H3
247	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
248	depends on OF
249	depends on DRM_MIPI_DSI
250	depends on BACKLIGHT_CLASS_DEVICE
251	help
252	  Say Y here if you want to enable support for Jadard JD9365DA-H3
253	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
254	  800RGBx1280 dots at maximum.
255
256config DRM_PANEL_JDI_LPM102A188A
257	tristate "JDI LPM102A188A DSI panel"
258	depends on OF && GPIOLIB
259	depends on DRM_MIPI_DSI
260	depends on BACKLIGHT_CLASS_DEVICE
261	help
262	  Say Y here if you want to enable support for JDI LPM102A188A DSI
263	  command mode panel as found in Google Pixel C devices.
264	  The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
265	  to the host.
266
267config DRM_PANEL_JDI_LT070ME05000
268	tristate "JDI LT070ME05000 WUXGA DSI panel"
269	depends on OF
270	depends on DRM_MIPI_DSI
271	depends on BACKLIGHT_CLASS_DEVICE
272	help
273	  Say Y here if you want to enable support for JDI DSI video mode
274	  panel as found in Google Nexus 7 (2013) devices.
275	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
276	  24 bit per pixel.
277
278config DRM_PANEL_JDI_R63452
279	tristate "JDI R63452 Full HD DSI panel"
280	depends on OF
281	depends on DRM_MIPI_DSI
282	depends on BACKLIGHT_CLASS_DEVICE
283	help
284	  Say Y here if you want to enable support for the JDI R63452
285	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
286
287config DRM_PANEL_KHADAS_TS050
288	tristate "Khadas TS050 panel"
289	depends on OF
290	depends on DRM_MIPI_DSI
291	depends on BACKLIGHT_CLASS_DEVICE
292	help
293	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
294	  panel module. The panel has a 1080x1920 resolution and uses
295	  24 bit RGB per pixel. It provides a MIPI DSI interface to
296	  the host, a built-in LED backlight and touch controller.
297
298config DRM_PANEL_KINGDISPLAY_KD097D04
299	tristate "Kingdisplay kd097d04 panel"
300	depends on OF
301	depends on DRM_MIPI_DSI
302	depends on BACKLIGHT_CLASS_DEVICE
303	help
304	  Say Y here if you want to enable support for Kingdisplay kd097d04
305	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
306	  24 bit RGB per pixel. It provides a MIPI DSI interface to
307	  the host and has a built-in LED backlight.
308
309config DRM_PANEL_LEADTEK_LTK050H3146W
310	tristate "Leadtek LTK050H3146W panel"
311	depends on OF
312	depends on DRM_MIPI_DSI
313	depends on BACKLIGHT_CLASS_DEVICE
314	help
315	  Say Y here if you want to enable support for Leadtek LTK050H3146W
316	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
317	  24 bit RGB per pixel. It provides a MIPI DSI interface to
318	  the host and has a built-in LED backlight.
319
320config DRM_PANEL_LEADTEK_LTK500HD1829
321	tristate "Leadtek LTK500HD1829 panel"
322	depends on OF
323	depends on DRM_MIPI_DSI
324	depends on BACKLIGHT_CLASS_DEVICE
325	help
326	  Say Y here if you want to enable support for Kingdisplay kd097d04
327	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
328	  24 bit RGB per pixel. It provides a MIPI DSI interface to
329	  the host and has a built-in LED backlight.
330
331config DRM_PANEL_LINCOLNTECH_LCD197
332	tristate "Lincoln Technologies lcd197 panel"
333	depends on OF
334	depends on DRM_MIPI_DSI
335	depends on BACKLIGHT_CLASS_DEVICE
336	help
337	  Say Y here if you want to enable support for lincolntech lcd197
338	  TFT-LCD modules. The panel has a 1080x1920 resolution and uses
339	  24 bit RGB per pixel. It provides a MIPI DSI interface to
340	  the host.
341
342config DRM_PANEL_LG_LB035Q02
343	tristate "LG LB035Q024573 RGB panel"
344	depends on GPIOLIB && OF && SPI
345	help
346	  Say Y here if you want to enable support for the LB035Q02 RGB panel
347	  (found on the Gumstix Overo Palo35 board). To compile this driver as
348	  a module, choose M here.
349
350config DRM_PANEL_LG_LG4573
351	tristate "LG4573 RGB/SPI panel"
352	depends on OF && SPI
353	select VIDEOMODE_HELPERS
354	help
355	  Say Y here if you want to enable support for LG4573 RGB panel.
356	  To compile this driver as a module, choose M here.
357
358config DRM_PANEL_LG_SW43408
359	tristate "LG SW43408 panel"
360	depends on OF
361	depends on DRM_MIPI_DSI
362	depends on BACKLIGHT_CLASS_DEVICE
363	help
364	  Say Y here if you want to enable support for LG sw43408 panel.
365	  The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
366	  pixel. It provides a MIPI DSI interface to the host and has a
367	  built-in LED backlight.
368
369config DRM_PANEL_MAGNACHIP_D53E6EA8966
370	tristate "Magnachip D53E6EA8966 DSI panel"
371	depends on OF && SPI
372	depends on DRM_MIPI_DSI
373	depends on BACKLIGHT_CLASS_DEVICE
374	select DRM_MIPI_DBI
375	help
376	  DRM panel driver for the Samsung AMS495QA01 panel controlled
377	  with the Magnachip D53E6EA8966 panel IC. This panel receives
378	  video data via DSI but commands via 9-bit SPI using DBI.
379
380config DRM_PANEL_MANTIX_MLAF057WE51
381	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
382	depends on OF
383	depends on DRM_MIPI_DSI
384	depends on BACKLIGHT_CLASS_DEVICE
385	help
386	  Say Y here if you want to enable support for the Mantix
387	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
388	  has a resolution of 720x1440 pixels, a built in backlight and touch
389	  controller.
390
391config DRM_PANEL_NEC_NL8048HL11
392	tristate "NEC NL8048HL11 RGB panel"
393	depends on GPIOLIB && OF && SPI
394	help
395	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
396	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
397	  as a module, choose M here.
398
399config DRM_PANEL_NEWVISION_NV3051D
400	tristate "NewVision NV3051D DSI panel"
401	depends on OF
402	depends on DRM_MIPI_DSI
403	depends on BACKLIGHT_CLASS_DEVICE
404	help
405	  This driver supports the NV3051D based panel found on the Anbernic
406	  RG353P and RG353V.
407
408config DRM_PANEL_NEWVISION_NV3052C
409	tristate "NewVision NV3052C RGB/SPI panel"
410	depends on OF && SPI
411	depends on BACKLIGHT_CLASS_DEVICE
412	select DRM_MIPI_DBI
413	help
414	  Say Y here if you want to enable support for the panels built
415	  around the NewVision NV3052C display controller.
416
417config DRM_PANEL_NOVATEK_NT35510
418	tristate "Novatek NT35510 RGB panel driver"
419	depends on OF
420	depends on DRM_MIPI_DSI
421	depends on BACKLIGHT_CLASS_DEVICE
422	help
423	  Say Y here if you want to enable support for the panels built
424	  around the Novatek NT35510 display controller, such as some
425	  Hydis panels.
426
427config DRM_PANEL_NOVATEK_NT35560
428	tristate "Novatek NT35560 DSI command mode panel"
429	depends on OF
430	depends on DRM_MIPI_DSI
431	depends on BACKLIGHT_CLASS_DEVICE
432	select VIDEOMODE_HELPERS
433	help
434	  Say Y here if you want to enable the Novatek NT35560 display
435	  controller. This panel supports DSI in both command and video
436	  mode. This supports several panels such as Sony ACX424AKM and
437	  ACX424AKP.
438
439config DRM_PANEL_NOVATEK_NT35950
440	tristate "Novatek NT35950 DSI panel"
441	depends on OF
442	depends on DRM_MIPI_DSI
443	depends on BACKLIGHT_CLASS_DEVICE
444	help
445	  Say Y here if you want to enable support for the panels built
446	  around the Novatek NT35950 display controller, such as some
447	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
448	  mobile phones.
449
450config DRM_PANEL_NOVATEK_NT36523
451	tristate "Novatek NT36523 panel driver"
452	depends on OF
453	depends on DRM_MIPI_DSI
454	depends on BACKLIGHT_CLASS_DEVICE
455	help
456	  Say Y here if you want to enable support for the panels built
457	  around the Novatek NT36523 display controller, such as some
458	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
459
460config DRM_PANEL_NOVATEK_NT36672A
461	tristate "Novatek NT36672A DSI panel"
462	depends on OF
463	depends on DRM_MIPI_DSI
464	depends on BACKLIGHT_CLASS_DEVICE
465	help
466	  Say Y here if you want to enable support for the panels built
467	  around the Novatek NT36672A display controller, such as some
468	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
469
470config DRM_PANEL_NOVATEK_NT36672E
471	tristate "Novatek NT36672E DSI panel"
472	depends on OF
473	depends on DRM_MIPI_DSI
474	depends on BACKLIGHT_CLASS_DEVICE
475	help
476	  Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
477	  LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
478	  RGB per pixel.
479
480config DRM_PANEL_NOVATEK_NT39016
481	tristate "Novatek NT39016 RGB/SPI panel"
482	depends on OF && SPI
483	depends on BACKLIGHT_CLASS_DEVICE
484	select REGMAP_SPI
485	help
486	  Say Y here if you want to enable support for the panels built
487	  around the Novatek NT39016 display controller.
488
489config DRM_PANEL_OLIMEX_LCD_OLINUXINO
490	tristate "Olimex LCD-OLinuXino panel"
491	depends on OF
492	depends on I2C
493	depends on BACKLIGHT_CLASS_DEVICE
494	select CRC32
495	help
496	  The panel is used with different sizes LCDs, from 480x272 to
497	  1280x800, and 24 bit per pixel.
498
499	  Say Y here if you want to enable support for Olimex Ltd.
500	  LCD-OLinuXino panel.
501
502config DRM_PANEL_ORISETECH_OTA5601A
503        tristate "Orise Technology ota5601a RGB/SPI panel"
504        depends on SPI
505        depends on BACKLIGHT_CLASS_DEVICE
506        select REGMAP_SPI
507        help
508          Say Y here if you want to enable support for the panels built
509          around the Orise Technology OTA9601A display controller.
510
511config DRM_PANEL_ORISETECH_OTM8009A
512	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
513	depends on OF
514	depends on DRM_MIPI_DSI
515	depends on BACKLIGHT_CLASS_DEVICE
516	help
517	  Say Y here if you want to enable support for Orise Technology
518	  otm8009a 480x800 dsi 2dl panel.
519
520config DRM_PANEL_OSD_OSD101T2587_53TS
521	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
522	depends on OF
523	depends on DRM_MIPI_DSI
524	depends on BACKLIGHT_CLASS_DEVICE
525	help
526	  Say Y here if you want to enable support for One Stop Displays
527	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
528
529config DRM_PANEL_PANASONIC_VVX10F034N00
530	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
531	depends on OF
532	depends on DRM_MIPI_DSI
533	depends on BACKLIGHT_CLASS_DEVICE
534	help
535	  Say Y here if you want to enable support for Panasonic VVX10F034N00
536	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
537	  Xperia Z2 tablets
538
539config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
540	tristate "Raspberry Pi 7-inch touchscreen panel"
541	depends on DRM_MIPI_DSI
542	help
543	  Say Y here if you want to enable support for the Raspberry
544	  Pi 7" Touchscreen.  To compile this driver as a module,
545	  choose M here.
546
547config DRM_PANEL_RAYDIUM_RM67191
548	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
549	depends on OF
550	depends on DRM_MIPI_DSI
551	depends on BACKLIGHT_CLASS_DEVICE
552	help
553	  Say Y here if you want to enable support for Raydium RM67191 FHD
554	  (1080x1920) DSI panel.
555
556config DRM_PANEL_RAYDIUM_RM68200
557	tristate "Raydium RM68200 720x1280 DSI video mode panel"
558	depends on OF
559	depends on DRM_MIPI_DSI
560	depends on BACKLIGHT_CLASS_DEVICE
561	help
562	  Say Y here if you want to enable support for Raydium RM68200
563	  720x1280 DSI video mode panel.
564
565config DRM_PANEL_RAYDIUM_RM692E5
566	tristate "Raydium RM692E5-based DSI panel"
567	depends on OF
568	depends on DRM_MIPI_DSI
569	depends on BACKLIGHT_CLASS_DEVICE
570	select DRM_DISPLAY_DP_HELPER
571	select DRM_DISPLAY_HELPER
572	help
573	  Say Y here if you want to enable support for Raydium RM692E5-based
574	  display panels, such as the one found in the Fairphone 5 smartphone.
575
576config DRM_PANEL_RAYDIUM_RM69380
577	tristate "Raydium RM69380-based DSI panel"
578	depends on OF && GPIOLIB
579	depends on DRM_MIPI_DSI
580	depends on BACKLIGHT_CLASS_DEVICE
581	help
582	  Say Y here if you want to enable support for Raydium RM69380-based
583	  display panels.
584
585	  This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
586	  in combination with an EDO OLED panel.
587
588config DRM_PANEL_RONBO_RB070D30
589	tristate "Ronbo Electronics RB070D30 panel"
590	depends on OF
591	depends on DRM_MIPI_DSI
592	depends on BACKLIGHT_CLASS_DEVICE
593	help
594	  Say Y here if you want to enable support for Ronbo Electronics
595	  RB070D30 1024x600 DSI panel.
596
597config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
598	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
599	depends on OF
600	select DRM_MIPI_DSI
601	select VIDEOMODE_HELPERS
602
603config DRM_PANEL_SAMSUNG_ATNA33XC20
604	tristate "Samsung ATNA33XC20 eDP panel"
605	depends on OF
606	depends on BACKLIGHT_CLASS_DEVICE
607	depends on PM
608	select DRM_DISPLAY_DP_HELPER
609	select DRM_DISPLAY_HELPER
610	select DRM_DISPLAY_DP_AUX_BUS
611	help
612	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
613	  be handled by the DRM_PANEL_SIMPLE driver because its power
614	  sequencing is non-standard.
615
616config DRM_PANEL_SAMSUNG_DB7430
617	tristate "Samsung DB7430-based DPI panels"
618	depends on OF && SPI && GPIOLIB
619	depends on BACKLIGHT_CLASS_DEVICE
620	select DRM_MIPI_DBI
621	help
622	  Say Y here if you want to enable support for the Samsung
623	  DB7430 DPI display controller used in such devices as the
624	  LMS397KF04 480x800 DPI panel.
625
626config DRM_PANEL_SAMSUNG_LD9040
627	tristate "Samsung LD9040 RGB/SPI panel"
628	depends on OF && SPI
629	depends on BACKLIGHT_CLASS_DEVICE
630	select VIDEOMODE_HELPERS
631
632config DRM_PANEL_SAMSUNG_S6E3FA7
633	tristate "Samsung S6E3FA7 panel driver"
634	depends on OF
635	depends on DRM_MIPI_DSI
636	depends on BACKLIGHT_CLASS_DEVICE
637	help
638	  Say Y here if you want to enable support for the Samsung S6E3FA7
639	  1920x2220 panel.
640
641config DRM_PANEL_SAMSUNG_S6D16D0
642	tristate "Samsung S6D16D0 DSI video mode panel"
643	depends on OF
644	depends on DRM_MIPI_DSI
645	select VIDEOMODE_HELPERS
646
647config DRM_PANEL_SAMSUNG_S6D27A1
648	tristate "Samsung S6D27A1 DPI panel driver"
649	depends on OF && SPI && GPIOLIB
650	select DRM_MIPI_DBI
651	help
652	  Say Y here if you want to enable support for the Samsung
653	  S6D27A1 DPI 480x800 panel.
654
655	  This panel can be found in Samsung Galaxy Ace 2
656	  GT-I8160 mobile phone.
657
658config DRM_PANEL_SAMSUNG_S6D7AA0
659	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
660	depends on OF
661	depends on BACKLIGHT_CLASS_DEVICE
662	select DRM_MIPI_DSI
663	select VIDEOMODE_HELPERS
664
665config DRM_PANEL_SAMSUNG_S6E3HA2
666	tristate "Samsung S6E3HA2 DSI video mode panel"
667	depends on OF
668	depends on DRM_MIPI_DSI
669	depends on BACKLIGHT_CLASS_DEVICE
670	select VIDEOMODE_HELPERS
671
672config DRM_PANEL_SAMSUNG_S6E63J0X03
673	tristate "Samsung S6E63J0X03 DSI command mode panel"
674	depends on OF
675	depends on DRM_MIPI_DSI
676	depends on BACKLIGHT_CLASS_DEVICE
677	select VIDEOMODE_HELPERS
678
679config DRM_PANEL_SAMSUNG_S6E63M0
680	tristate "Samsung S6E63M0 RGB panel"
681	depends on OF
682	depends on BACKLIGHT_CLASS_DEVICE
683	help
684	  Say Y here if you want to enable support for Samsung S6E63M0
685	  AMOLED LCD panel. This panel can be accessed using SPI or
686	  DSI.
687
688config DRM_PANEL_SAMSUNG_S6E63M0_SPI
689	tristate "Samsung S6E63M0 RGB SPI interface"
690	depends on SPI
691	depends on DRM_PANEL_SAMSUNG_S6E63M0
692	default DRM_PANEL_SAMSUNG_S6E63M0
693	select DRM_MIPI_DBI
694	help
695	  Say Y here if you want to be able to access the Samsung
696	  S6E63M0 panel using SPI.
697
698config DRM_PANEL_SAMSUNG_S6E63M0_DSI
699	tristate "Samsung S6E63M0 RGB DSI interface"
700	depends on DRM_MIPI_DSI
701	depends on DRM_PANEL_SAMSUNG_S6E63M0
702	help
703	  Say Y here if you want to be able to access the Samsung
704	  S6E63M0 panel using DSI.
705
706config DRM_PANEL_SAMSUNG_S6E8AA0
707	tristate "Samsung S6E8AA0 DSI video mode panel"
708	depends on OF
709	select DRM_MIPI_DSI
710	select VIDEOMODE_HELPERS
711
712config DRM_PANEL_SAMSUNG_SOFEF00
713	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
714	depends on OF
715	depends on DRM_MIPI_DSI
716	depends on BACKLIGHT_CLASS_DEVICE
717	select VIDEOMODE_HELPERS
718	help
719	  Say Y or M here if you want to enable support for the Samsung AMOLED
720	  command mode panels found in the OnePlus 6/6T smartphones.
721
722	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
723
724config DRM_PANEL_SEIKO_43WVF1G
725	tristate "Seiko 43WVF1G panel"
726	depends on OF
727	depends on BACKLIGHT_CLASS_DEVICE
728	select VIDEOMODE_HELPERS
729	help
730	  Say Y here if you want to enable support for the Seiko
731	  43WVF1G controller for 800x480 LCD panels
732
733config DRM_PANEL_SHARP_LQ101R1SX01
734	tristate "Sharp LQ101R1SX01 panel"
735	depends on OF
736	depends on DRM_MIPI_DSI
737	depends on BACKLIGHT_CLASS_DEVICE
738	help
739	  Say Y here if you want to enable support for Sharp LQ101R1SX01
740	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
741	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
742	  the host and has a built-in LED backlight.
743
744	  To compile this driver as a module, choose M here: the module
745	  will be called panel-sharp-lq101r1sx01.
746
747config DRM_PANEL_SHARP_LS037V7DW01
748	tristate "Sharp LS037V7DW01 VGA LCD panel"
749	depends on GPIOLIB && OF && REGULATOR
750	help
751	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
752	  (480x640) LCD panel (found on the TI SDP3430 board).
753
754config DRM_PANEL_SHARP_LS043T1LE01
755	tristate "Sharp LS043T1LE01 qHD video mode panel"
756	depends on OF
757	depends on DRM_MIPI_DSI
758	depends on BACKLIGHT_CLASS_DEVICE
759	help
760	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
761	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
762
763config DRM_PANEL_SHARP_LS060T1SX01
764	tristate "Sharp LS060T1SX01 FullHD video mode panel"
765	depends on OF
766	depends on DRM_MIPI_DSI
767	depends on BACKLIGHT_CLASS_DEVICE
768	help
769	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
770	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
771	  Bundle.
772
773config DRM_PANEL_SITRONIX_ST7701
774	tristate "Sitronix ST7701 panel driver"
775	depends on OF
776	depends on DRM_MIPI_DSI
777	depends on BACKLIGHT_CLASS_DEVICE
778	help
779	  Say Y here if you want to enable support for the Sitronix
780	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
781	  system interfaces.
782
783config DRM_PANEL_SITRONIX_ST7703
784	tristate "Sitronix ST7703 based MIPI touchscreen panels"
785	depends on OF
786	depends on DRM_MIPI_DSI
787	depends on BACKLIGHT_CLASS_DEVICE
788	help
789	  Say Y here if you want to enable support for Sitronix ST7703 based
790	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
791	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
792	  in backlight and touch controller.
793	  Touch input support is provided by the goodix driver and needs to be
794	  selected separately.
795
796config DRM_PANEL_SITRONIX_ST7789V
797	tristate "Sitronix ST7789V panel"
798	depends on OF && SPI
799	depends on BACKLIGHT_CLASS_DEVICE
800	help
801	  Say Y here if you want to enable support for the Sitronix
802	  ST7789V controller for 240x320 LCD panels
803
804config DRM_PANEL_SONY_ACX565AKM
805	tristate "Sony ACX565AKM panel"
806	depends on GPIOLIB && OF && SPI
807	depends on BACKLIGHT_CLASS_DEVICE
808	help
809	  Say Y here if you want to enable support for the Sony ACX565AKM
810	  800x600 3.5" panel (found on the Nokia N900).
811
812config DRM_PANEL_SONY_TD4353_JDI
813	tristate "Sony TD4353 JDI panel"
814	depends on GPIOLIB && OF
815	depends on DRM_MIPI_DSI
816	depends on BACKLIGHT_CLASS_DEVICE
817	help
818	  Say Y here if you want to enable support for the Sony Tama
819	  TD4353 JDI command mode panel as found on some Sony Xperia
820	  XZ2 and XZ2 Compact smartphones.
821
822config DRM_PANEL_SONY_TULIP_TRULY_NT35521
823	tristate "Sony Tulip Truly NT35521 panel"
824	depends on GPIOLIB && OF
825	depends on DRM_MIPI_DSI
826	depends on BACKLIGHT_CLASS_DEVICE
827	help
828	  Say Y here if you want to enable support for the Sony Tulip
829	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
830	  Aqua phone.
831
832config DRM_PANEL_STARTEK_KD070FHFID015
833	tristate "STARTEK KD070FHFID015 panel"
834	depends on OF
835	depends on DRM_MIPI_DSI
836	depends on BACKLIGHT_CLASS_DEVICE
837	help
838	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
839	  based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
840	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
841	  the host, a built-in LED backlight and touch controller.
842
843config DRM_PANEL_EDP
844	tristate "support for simple Embedded DisplayPort panels"
845	depends on OF
846	depends on BACKLIGHT_CLASS_DEVICE
847	depends on PM
848	select VIDEOMODE_HELPERS
849	select DRM_DISPLAY_DP_HELPER
850	select DRM_DISPLAY_HELPER
851	select DRM_DISPLAY_DP_AUX_BUS
852	select DRM_KMS_HELPER
853	help
854	  DRM panel driver for dumb eDP panels that need at most a regulator and
855	  a GPIO to be powered up. Optionally a backlight can be attached so
856	  that it can be automatically turned off when the panel goes into a
857	  low power state.
858
859config DRM_PANEL_SIMPLE
860	tristate "support for simple panels (other than eDP ones)"
861	depends on OF
862	depends on BACKLIGHT_CLASS_DEVICE
863	depends on PM
864	select VIDEOMODE_HELPERS
865	help
866	  DRM panel driver for dumb non-eDP panels that need at most a regulator
867	  and a GPIO to be powered up. Optionally a backlight can be attached so
868	  that it can be automatically turned off when the panel goes into a
869	  low power state.
870
871config DRM_PANEL_SYNAPTICS_R63353
872	tristate "Synaptics R63353-based panels"
873	depends on OF
874	depends on DRM_MIPI_DSI
875	depends on BACKLIGHT_CLASS_DEVICE
876	help
877	  Say Y if you want to enable support for panels based on the
878	  Synaptics R63353 controller.
879
880config DRM_PANEL_TDO_TL070WSH30
881	tristate "TDO TL070WSH30 DSI panel"
882	depends on OF
883	depends on DRM_MIPI_DSI
884	depends on BACKLIGHT_CLASS_DEVICE
885	help
886	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
887	  panel module. The panel has a 1024×600 resolution and uses
888	  24 bit RGB per pixel. It provides a MIPI DSI interface to
889	  the host, a built-in LED backlight and touch controller.
890
891config DRM_PANEL_TPO_TD028TTEC1
892	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
893	depends on OF && SPI
894	depends on BACKLIGHT_CLASS_DEVICE
895	help
896	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
897	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
898
899config DRM_PANEL_TPO_TD043MTEA1
900	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
901	depends on GPIOLIB && OF && REGULATOR && SPI
902	help
903	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
904	  4.3" panel (found on the OMAP3 Pandora board).
905
906config DRM_PANEL_TPO_TPG110
907	tristate "TPO TPG 800x400 panel"
908	depends on OF && SPI && GPIOLIB
909	depends on BACKLIGHT_CLASS_DEVICE
910	help
911	  Say Y here if you want to enable support for TPO TPG110
912	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
913	  800x400 LCD panels.
914
915config DRM_PANEL_TRULY_NT35597_WQXGA
916	tristate "Truly WQXGA"
917	depends on OF
918	depends on DRM_MIPI_DSI
919	help
920	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
921	  Video Mode panel
922
923config DRM_PANEL_VISIONOX_R66451
924	tristate "Visionox R66451"
925	depends on OF
926	depends on DRM_MIPI_DSI
927	depends on BACKLIGHT_CLASS_DEVICE
928	select DRM_DISPLAY_DP_HELPER
929	select DRM_DISPLAY_HELPER
930	help
931	  Say Y here if you want to enable support for Visionox
932	  R66451 1080x2340 AMOLED DSI panel.
933
934config DRM_PANEL_VISIONOX_RM69299
935	tristate "Visionox RM69299"
936	depends on OF
937	depends on DRM_MIPI_DSI
938	help
939	  Say Y here if you want to enable support for Visionox
940	  RM69299  DSI Video Mode panel.
941
942config DRM_PANEL_VISIONOX_VTDR6130
943	tristate "Visionox VTDR6130"
944	depends on OF
945	depends on DRM_MIPI_DSI
946	depends on BACKLIGHT_CLASS_DEVICE
947	help
948	  Say Y here if you want to enable support for Visionox
949	  VTDR6130 1080x2400 AMOLED DSI panel.
950
951config DRM_PANEL_WIDECHIPS_WS2401
952	tristate "Widechips WS2401 DPI panel driver"
953	depends on SPI && GPIOLIB
954	depends on BACKLIGHT_CLASS_DEVICE
955	select DRM_MIPI_DBI
956	help
957	  Say Y here if you want to enable support for the Widechips WS2401 DPI
958	  480x800 display controller used in panels such as Samsung LMS380KF01.
959	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
960
961config DRM_PANEL_XINPENG_XPP055C272
962	tristate "Xinpeng XPP055C272 panel driver"
963	depends on OF
964	depends on DRM_MIPI_DSI
965	depends on BACKLIGHT_CLASS_DEVICE
966	help
967	  Say Y here if you want to enable support for the Xinpeng
968	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
969	  system interfaces.
970endmenu
971