1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TH101MB31UIG002_28A 71 tristate "Boe TH101MB31UIG002-28A panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to enable support for Boe 77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280 78 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI 79 interface to the host and has a built-in LED backlight. 80 81config DRM_PANEL_BOE_TV101WUM_NL6 82 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 83 depends on OF 84 depends on DRM_MIPI_DSI 85 depends on BACKLIGHT_CLASS_DEVICE 86 help 87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 88 45NA WUXGA PANEL DSI Video Mode panel 89 90config DRM_PANEL_EBBG_FT8719 91 tristate "EBBG FT8719 panel driver" 92 depends on OF 93 depends on DRM_MIPI_DSI 94 depends on BACKLIGHT_CLASS_DEVICE 95 help 96 Say Y here if you want to enable support for the EBBG FT8719 97 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 98 The panel has a resolution of 1080x2246. It provides a MIPI DSI 99 interface to the host. 100 101config DRM_PANEL_ELIDA_KD35T133 102 tristate "Elida KD35T133 panel driver" 103 depends on OF 104 depends on DRM_MIPI_DSI 105 depends on BACKLIGHT_CLASS_DEVICE 106 help 107 Say Y here if you want to enable support for the Elida 108 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 109 system interfaces. 110 111config DRM_PANEL_FEIXIN_K101_IM2BA02 112 tristate "Feixin K101 IM2BA02 panel" 113 depends on OF 114 depends on DRM_MIPI_DSI 115 depends on BACKLIGHT_CLASS_DEVICE 116 help 117 Say Y here if you want to enable support for the Feixin K101 IM2BA02 118 4-lane 800x1280 MIPI DSI panel. 119 120config DRM_PANEL_FEIYANG_FY07024DI26A30D 121 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 122 depends on OF 123 depends on DRM_MIPI_DSI 124 depends on BACKLIGHT_CLASS_DEVICE 125 help 126 Say Y if you want to enable support for panels based on the 127 Feiyang FY07024DI26A30-D MIPI-DSI interface. 128 129config DRM_PANEL_DSI_CM 130 tristate "Generic DSI command mode panels" 131 depends on OF 132 depends on DRM_MIPI_DSI 133 depends on BACKLIGHT_CLASS_DEVICE 134 help 135 DRM panel driver for DSI command mode panels with support for 136 embedded and external backlights. 137 138config DRM_PANEL_LVDS 139 tristate "Generic LVDS panel driver" 140 depends on OF 141 depends on BACKLIGHT_CLASS_DEVICE 142 select VIDEOMODE_HELPERS 143 help 144 This driver supports LVDS panels that don't require device-specific 145 handling of power supplies or control signals. It implements automatic 146 backlight handling if the panel is attached to a backlight controller. 147 148config DRM_PANEL_HIMAX_HX83102 149 tristate "Himax HX83102-based panels" 150 depends on OF 151 depends on DRM_MIPI_DSI 152 depends on BACKLIGHT_CLASS_DEVICE 153 help 154 Say Y if you want to enable support for panels based on the 155 Himax HX83102 controller. 156 157config DRM_PANEL_HIMAX_HX83112A 158 tristate "Himax HX83112A-based DSI panel" 159 depends on OF 160 depends on DRM_MIPI_DSI 161 depends on BACKLIGHT_CLASS_DEVICE 162 select DRM_KMS_HELPER 163 help 164 Say Y here if you want to enable support for Himax HX83112A-based 165 display panels, such as the one found in the Fairphone 4 smartphone. 166 167config DRM_PANEL_HIMAX_HX8394 168 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 169 depends on OF 170 depends on DRM_MIPI_DSI 171 depends on BACKLIGHT_CLASS_DEVICE 172 help 173 Say Y if you want to enable support for panels based on the 174 Himax HX8394 controller, such as the HannStar HSD060BHW4 175 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 176 177 If M is selected the module will be called panel-himax-hx8394. 178 179config DRM_PANEL_ILITEK_IL9322 180 tristate "Ilitek ILI9322 320x240 QVGA panels" 181 depends on OF && SPI 182 select REGMAP 183 help 184 Say Y here if you want to enable support for Ilitek IL9322 185 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 186 187config DRM_PANEL_ILITEK_ILI9341 188 tristate "Ilitek ILI9341 240x320 QVGA panels" 189 depends on SPI 190 select DRM_KMS_HELPER 191 select DRM_GEM_DMA_HELPER 192 depends on BACKLIGHT_CLASS_DEVICE 193 select DRM_MIPI_DBI 194 help 195 Say Y here if you want to enable support for Ilitek IL9341 196 QVGA (240x320) RGB panels. support serial & parallel rgb 197 interface. 198 199config DRM_PANEL_ILITEK_ILI9805 200 tristate "Ilitek ILI9805-based panels" 201 depends on OF 202 depends on DRM_MIPI_DSI 203 depends on BACKLIGHT_CLASS_DEVICE 204 help 205 Say Y if you want to enable support for panels based on the 206 Ilitek ILI9805 controller. 207 208config DRM_PANEL_ILITEK_ILI9806E 209 tristate "Ilitek ILI9806E-based panels" 210 depends on OF 211 depends on DRM_MIPI_DSI 212 depends on BACKLIGHT_CLASS_DEVICE 213 help 214 Say Y if you want to enable support for panels based on the 215 Ilitek ILI9806E controller. 216 217config DRM_PANEL_ILITEK_ILI9881C 218 tristate "Ilitek ILI9881C-based panels" 219 depends on OF 220 depends on DRM_MIPI_DSI 221 depends on BACKLIGHT_CLASS_DEVICE 222 help 223 Say Y if you want to enable support for panels based on the 224 Ilitek ILI9881c controller. 225 226config DRM_PANEL_ILITEK_ILI9882T 227 tristate "Ilitek ILI9882t-based panels" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y if you want to enable support for panels based on the 233 Ilitek ILI9882t controller. 234 235config DRM_PANEL_INNOLUX_EJ030NA 236 tristate "Innolux EJ030NA 320x480 LCD panel" 237 depends on OF && SPI 238 select REGMAP_SPI 239 help 240 Say Y here to enable support for the Innolux/Chimei EJ030NA 241 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 242 and LDK handheld gaming consoles. 243 244config DRM_PANEL_INNOLUX_P079ZCA 245 tristate "Innolux P079ZCA panel" 246 depends on OF 247 depends on DRM_MIPI_DSI 248 depends on BACKLIGHT_CLASS_DEVICE 249 help 250 Say Y here if you want to enable support for Innolux P079ZCA 251 TFT-LCD modules. The panel has a 1024x768 resolution and uses 252 24 bit RGB per pixel. It provides a MIPI DSI interface to 253 the host and has a built-in LED backlight. 254 255config DRM_PANEL_JADARD_JD9365DA_H3 256 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 257 depends on OF 258 depends on DRM_MIPI_DSI 259 depends on BACKLIGHT_CLASS_DEVICE 260 help 261 Say Y here if you want to enable support for Jadard JD9365DA-H3 262 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 263 800RGBx1280 dots at maximum. 264 265config DRM_PANEL_JDI_LPM102A188A 266 tristate "JDI LPM102A188A DSI panel" 267 depends on OF && GPIOLIB 268 depends on DRM_MIPI_DSI 269 depends on BACKLIGHT_CLASS_DEVICE 270 help 271 Say Y here if you want to enable support for JDI LPM102A188A DSI 272 command mode panel as found in Google Pixel C devices. 273 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface 274 to the host. 275 276config DRM_PANEL_JDI_LT070ME05000 277 tristate "JDI LT070ME05000 WUXGA DSI panel" 278 depends on OF 279 depends on DRM_MIPI_DSI 280 depends on BACKLIGHT_CLASS_DEVICE 281 help 282 Say Y here if you want to enable support for JDI DSI video mode 283 panel as found in Google Nexus 7 (2013) devices. 284 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 285 24 bit per pixel. 286 287config DRM_PANEL_JDI_R63452 288 tristate "JDI R63452 Full HD DSI panel" 289 depends on OF 290 depends on DRM_MIPI_DSI 291 depends on BACKLIGHT_CLASS_DEVICE 292 help 293 Say Y here if you want to enable support for the JDI R63452 294 DSI command mode panel as found in Xiaomi Mi 5 Devices. 295 296config DRM_PANEL_KHADAS_TS050 297 tristate "Khadas TS050 panel" 298 depends on OF 299 depends on DRM_MIPI_DSI 300 depends on BACKLIGHT_CLASS_DEVICE 301 help 302 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 303 panel module. The panel has a 1080x1920 resolution and uses 304 24 bit RGB per pixel. It provides a MIPI DSI interface to 305 the host, a built-in LED backlight and touch controller. 306 307config DRM_PANEL_KINGDISPLAY_KD097D04 308 tristate "Kingdisplay kd097d04 panel" 309 depends on OF 310 depends on DRM_MIPI_DSI 311 depends on BACKLIGHT_CLASS_DEVICE 312 help 313 Say Y here if you want to enable support for Kingdisplay kd097d04 314 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 315 24 bit RGB per pixel. It provides a MIPI DSI interface to 316 the host and has a built-in LED backlight. 317 318config DRM_PANEL_LEADTEK_LTK050H3146W 319 tristate "Leadtek LTK050H3146W panel" 320 depends on OF 321 depends on DRM_MIPI_DSI 322 depends on BACKLIGHT_CLASS_DEVICE 323 help 324 Say Y here if you want to enable support for Leadtek LTK050H3146W 325 TFT-LCD modules. The panel has a 720x1280 resolution and uses 326 24 bit RGB per pixel. It provides a MIPI DSI interface to 327 the host and has a built-in LED backlight. 328 329config DRM_PANEL_LEADTEK_LTK500HD1829 330 tristate "Leadtek LTK500HD1829 panel" 331 depends on OF 332 depends on DRM_MIPI_DSI 333 depends on BACKLIGHT_CLASS_DEVICE 334 help 335 Say Y here if you want to enable support for Kingdisplay kd097d04 336 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 337 24 bit RGB per pixel. It provides a MIPI DSI interface to 338 the host and has a built-in LED backlight. 339 340config DRM_PANEL_LINCOLNTECH_LCD197 341 tristate "Lincoln Technologies lcd197 panel" 342 depends on OF 343 depends on DRM_MIPI_DSI 344 depends on BACKLIGHT_CLASS_DEVICE 345 help 346 Say Y here if you want to enable support for lincolntech lcd197 347 TFT-LCD modules. The panel has a 1080x1920 resolution and uses 348 24 bit RGB per pixel. It provides a MIPI DSI interface to 349 the host. 350 351config DRM_PANEL_LG_LB035Q02 352 tristate "LG LB035Q024573 RGB panel" 353 depends on GPIOLIB && OF && SPI 354 help 355 Say Y here if you want to enable support for the LB035Q02 RGB panel 356 (found on the Gumstix Overo Palo35 board). To compile this driver as 357 a module, choose M here. 358 359config DRM_PANEL_LG_LG4573 360 tristate "LG4573 RGB/SPI panel" 361 depends on OF && SPI 362 select VIDEOMODE_HELPERS 363 help 364 Say Y here if you want to enable support for LG4573 RGB panel. 365 To compile this driver as a module, choose M here. 366 367config DRM_PANEL_LG_SW43408 368 tristate "LG SW43408 panel" 369 depends on OF 370 depends on DRM_MIPI_DSI 371 depends on BACKLIGHT_CLASS_DEVICE 372 help 373 Say Y here if you want to enable support for LG sw43408 panel. 374 The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per 375 pixel. It provides a MIPI DSI interface to the host and has a 376 built-in LED backlight. 377 378config DRM_PANEL_MAGNACHIP_D53E6EA8966 379 tristate "Magnachip D53E6EA8966 DSI panel" 380 depends on OF && SPI 381 depends on DRM_MIPI_DSI 382 depends on BACKLIGHT_CLASS_DEVICE 383 select DRM_MIPI_DBI 384 help 385 DRM panel driver for the Samsung AMS495QA01 panel controlled 386 with the Magnachip D53E6EA8966 panel IC. This panel receives 387 video data via DSI but commands via 9-bit SPI using DBI. 388 389config DRM_PANEL_MANTIX_MLAF057WE51 390 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 391 depends on OF 392 depends on DRM_MIPI_DSI 393 depends on BACKLIGHT_CLASS_DEVICE 394 help 395 Say Y here if you want to enable support for the Mantix 396 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 397 has a resolution of 720x1440 pixels, a built in backlight and touch 398 controller. 399 400config DRM_PANEL_NEC_NL8048HL11 401 tristate "NEC NL8048HL11 RGB panel" 402 depends on GPIOLIB && OF && SPI 403 help 404 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 405 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 406 as a module, choose M here. 407 408config DRM_PANEL_NEWVISION_NV3051D 409 tristate "NewVision NV3051D DSI panel" 410 depends on OF 411 depends on DRM_MIPI_DSI 412 depends on BACKLIGHT_CLASS_DEVICE 413 help 414 This driver supports the NV3051D based panel found on the Anbernic 415 RG353P and RG353V. 416 417config DRM_PANEL_NEWVISION_NV3052C 418 tristate "NewVision NV3052C RGB/SPI panel" 419 depends on OF && SPI 420 depends on BACKLIGHT_CLASS_DEVICE 421 select DRM_MIPI_DBI 422 help 423 Say Y here if you want to enable support for the panels built 424 around the NewVision NV3052C display controller. 425 426config DRM_PANEL_NOVATEK_NT35510 427 tristate "Novatek NT35510 RGB panel driver" 428 depends on OF 429 depends on DRM_MIPI_DSI 430 depends on BACKLIGHT_CLASS_DEVICE 431 help 432 Say Y here if you want to enable support for the panels built 433 around the Novatek NT35510 display controller, such as some 434 Hydis panels. 435 436config DRM_PANEL_NOVATEK_NT35560 437 tristate "Novatek NT35560 DSI command mode panel" 438 depends on OF 439 depends on DRM_MIPI_DSI 440 depends on BACKLIGHT_CLASS_DEVICE 441 select VIDEOMODE_HELPERS 442 help 443 Say Y here if you want to enable the Novatek NT35560 display 444 controller. This panel supports DSI in both command and video 445 mode. This supports several panels such as Sony ACX424AKM and 446 ACX424AKP. 447 448config DRM_PANEL_NOVATEK_NT35950 449 tristate "Novatek NT35950 DSI panel" 450 depends on OF 451 depends on DRM_MIPI_DSI 452 depends on BACKLIGHT_CLASS_DEVICE 453 help 454 Say Y here if you want to enable support for the panels built 455 around the Novatek NT35950 display controller, such as some 456 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 457 mobile phones. 458 459config DRM_PANEL_NOVATEK_NT36523 460 tristate "Novatek NT36523 panel driver" 461 depends on OF 462 depends on DRM_MIPI_DSI 463 depends on BACKLIGHT_CLASS_DEVICE 464 help 465 Say Y here if you want to enable support for the panels built 466 around the Novatek NT36523 display controller, such as some 467 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets. 468 469config DRM_PANEL_NOVATEK_NT36672A 470 tristate "Novatek NT36672A DSI panel" 471 depends on OF 472 depends on DRM_MIPI_DSI 473 depends on BACKLIGHT_CLASS_DEVICE 474 help 475 Say Y here if you want to enable support for the panels built 476 around the Novatek NT36672A display controller, such as some 477 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 478 479config DRM_PANEL_NOVATEK_NT36672E 480 tristate "Novatek NT36672E DSI panel" 481 depends on OF 482 depends on DRM_MIPI_DSI 483 depends on BACKLIGHT_CLASS_DEVICE 484 help 485 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode 486 LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit 487 RGB per pixel. 488 489config DRM_PANEL_NOVATEK_NT39016 490 tristate "Novatek NT39016 RGB/SPI panel" 491 depends on OF && SPI 492 depends on BACKLIGHT_CLASS_DEVICE 493 select REGMAP_SPI 494 help 495 Say Y here if you want to enable support for the panels built 496 around the Novatek NT39016 display controller. 497 498config DRM_PANEL_OLIMEX_LCD_OLINUXINO 499 tristate "Olimex LCD-OLinuXino panel" 500 depends on OF 501 depends on I2C 502 depends on BACKLIGHT_CLASS_DEVICE 503 select CRC32 504 help 505 The panel is used with different sizes LCDs, from 480x272 to 506 1280x800, and 24 bit per pixel. 507 508 Say Y here if you want to enable support for Olimex Ltd. 509 LCD-OLinuXino panel. 510 511config DRM_PANEL_ORISETECH_OTA5601A 512 tristate "Orise Technology ota5601a RGB/SPI panel" 513 depends on SPI 514 depends on BACKLIGHT_CLASS_DEVICE 515 select REGMAP_SPI 516 help 517 Say Y here if you want to enable support for the panels built 518 around the Orise Technology OTA9601A display controller. 519 520config DRM_PANEL_ORISETECH_OTM8009A 521 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 522 depends on OF 523 depends on DRM_MIPI_DSI 524 depends on BACKLIGHT_CLASS_DEVICE 525 help 526 Say Y here if you want to enable support for Orise Technology 527 otm8009a 480x800 dsi 2dl panel. 528 529config DRM_PANEL_OSD_OSD101T2587_53TS 530 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 531 depends on OF 532 depends on DRM_MIPI_DSI 533 depends on BACKLIGHT_CLASS_DEVICE 534 help 535 Say Y here if you want to enable support for One Stop Displays 536 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 537 538config DRM_PANEL_PANASONIC_VVX10F034N00 539 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 540 depends on OF 541 depends on DRM_MIPI_DSI 542 depends on BACKLIGHT_CLASS_DEVICE 543 help 544 Say Y here if you want to enable support for Panasonic VVX10F034N00 545 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 546 Xperia Z2 tablets 547 548config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 549 tristate "Raspberry Pi 7-inch touchscreen panel" 550 depends on DRM_MIPI_DSI 551 help 552 Say Y here if you want to enable support for the Raspberry 553 Pi 7" Touchscreen. To compile this driver as a module, 554 choose M here. 555 556config DRM_PANEL_RAYDIUM_RM67191 557 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 558 depends on OF 559 depends on DRM_MIPI_DSI 560 depends on BACKLIGHT_CLASS_DEVICE 561 help 562 Say Y here if you want to enable support for Raydium RM67191 FHD 563 (1080x1920) DSI panel. 564 565config DRM_PANEL_RAYDIUM_RM68200 566 tristate "Raydium RM68200 720x1280 DSI video mode panel" 567 depends on OF 568 depends on DRM_MIPI_DSI 569 depends on BACKLIGHT_CLASS_DEVICE 570 help 571 Say Y here if you want to enable support for Raydium RM68200 572 720x1280 DSI video mode panel. 573 574config DRM_PANEL_RAYDIUM_RM692E5 575 tristate "Raydium RM692E5-based DSI panel" 576 depends on OF 577 depends on DRM_MIPI_DSI 578 depends on BACKLIGHT_CLASS_DEVICE 579 select DRM_DISPLAY_DP_HELPER 580 select DRM_DISPLAY_HELPER 581 help 582 Say Y here if you want to enable support for Raydium RM692E5-based 583 display panels, such as the one found in the Fairphone 5 smartphone. 584 585config DRM_PANEL_RAYDIUM_RM69380 586 tristate "Raydium RM69380-based DSI panel" 587 depends on OF && GPIOLIB 588 depends on DRM_MIPI_DSI 589 depends on BACKLIGHT_CLASS_DEVICE 590 help 591 Say Y here if you want to enable support for Raydium RM69380-based 592 display panels. 593 594 This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021 595 in combination with an EDO OLED panel. 596 597config DRM_PANEL_RONBO_RB070D30 598 tristate "Ronbo Electronics RB070D30 panel" 599 depends on OF 600 depends on DRM_MIPI_DSI 601 depends on BACKLIGHT_CLASS_DEVICE 602 help 603 Say Y here if you want to enable support for Ronbo Electronics 604 RB070D30 1024x600 DSI panel. 605 606config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 607 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 608 depends on OF 609 select DRM_MIPI_DSI 610 select VIDEOMODE_HELPERS 611 612config DRM_PANEL_SAMSUNG_ATNA33XC20 613 tristate "Samsung ATNA33XC20 eDP panel" 614 depends on OF 615 depends on BACKLIGHT_CLASS_DEVICE 616 depends on PM 617 select DRM_DISPLAY_DP_HELPER 618 select DRM_DISPLAY_HELPER 619 select DRM_DISPLAY_DP_AUX_BUS 620 help 621 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 622 be handled by the DRM_PANEL_SIMPLE driver because its power 623 sequencing is non-standard. 624 625config DRM_PANEL_SAMSUNG_DB7430 626 tristate "Samsung DB7430-based DPI panels" 627 depends on OF && SPI && GPIOLIB 628 depends on BACKLIGHT_CLASS_DEVICE 629 select DRM_MIPI_DBI 630 help 631 Say Y here if you want to enable support for the Samsung 632 DB7430 DPI display controller used in such devices as the 633 LMS397KF04 480x800 DPI panel. 634 635config DRM_PANEL_SAMSUNG_LD9040 636 tristate "Samsung LD9040 RGB/SPI panel" 637 depends on OF && SPI 638 depends on BACKLIGHT_CLASS_DEVICE 639 select VIDEOMODE_HELPERS 640 641config DRM_PANEL_SAMSUNG_S6E3FA7 642 tristate "Samsung S6E3FA7 panel driver" 643 depends on OF 644 depends on DRM_MIPI_DSI 645 depends on BACKLIGHT_CLASS_DEVICE 646 help 647 Say Y here if you want to enable support for the Samsung S6E3FA7 648 1920x2220 panel. 649 650config DRM_PANEL_SAMSUNG_S6D16D0 651 tristate "Samsung S6D16D0 DSI video mode panel" 652 depends on OF 653 depends on DRM_MIPI_DSI 654 select VIDEOMODE_HELPERS 655 656config DRM_PANEL_SAMSUNG_S6D27A1 657 tristate "Samsung S6D27A1 DPI panel driver" 658 depends on OF && SPI && GPIOLIB 659 select DRM_MIPI_DBI 660 help 661 Say Y here if you want to enable support for the Samsung 662 S6D27A1 DPI 480x800 panel. 663 664 This panel can be found in Samsung Galaxy Ace 2 665 GT-I8160 mobile phone. 666 667config DRM_PANEL_SAMSUNG_S6D7AA0 668 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller" 669 depends on OF 670 depends on BACKLIGHT_CLASS_DEVICE 671 select DRM_MIPI_DSI 672 select VIDEOMODE_HELPERS 673 674config DRM_PANEL_SAMSUNG_S6E3HA2 675 tristate "Samsung S6E3HA2 DSI video mode panel" 676 depends on OF 677 depends on DRM_MIPI_DSI 678 depends on BACKLIGHT_CLASS_DEVICE 679 select VIDEOMODE_HELPERS 680 681config DRM_PANEL_SAMSUNG_S6E63J0X03 682 tristate "Samsung S6E63J0X03 DSI command mode panel" 683 depends on OF 684 depends on DRM_MIPI_DSI 685 depends on BACKLIGHT_CLASS_DEVICE 686 select VIDEOMODE_HELPERS 687 688config DRM_PANEL_SAMSUNG_S6E63M0 689 tristate "Samsung S6E63M0 RGB panel" 690 depends on OF 691 depends on BACKLIGHT_CLASS_DEVICE 692 help 693 Say Y here if you want to enable support for Samsung S6E63M0 694 AMOLED LCD panel. This panel can be accessed using SPI or 695 DSI. 696 697config DRM_PANEL_SAMSUNG_S6E63M0_SPI 698 tristate "Samsung S6E63M0 RGB SPI interface" 699 depends on SPI 700 depends on DRM_PANEL_SAMSUNG_S6E63M0 701 default DRM_PANEL_SAMSUNG_S6E63M0 702 select DRM_MIPI_DBI 703 help 704 Say Y here if you want to be able to access the Samsung 705 S6E63M0 panel using SPI. 706 707config DRM_PANEL_SAMSUNG_S6E63M0_DSI 708 tristate "Samsung S6E63M0 RGB DSI interface" 709 depends on DRM_MIPI_DSI 710 depends on DRM_PANEL_SAMSUNG_S6E63M0 711 help 712 Say Y here if you want to be able to access the Samsung 713 S6E63M0 panel using DSI. 714 715config DRM_PANEL_SAMSUNG_S6E8AA0 716 tristate "Samsung S6E8AA0 DSI video mode panel" 717 depends on OF 718 select DRM_MIPI_DSI 719 select VIDEOMODE_HELPERS 720 721config DRM_PANEL_SAMSUNG_SOFEF00 722 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 723 depends on OF 724 depends on DRM_MIPI_DSI 725 depends on BACKLIGHT_CLASS_DEVICE 726 select VIDEOMODE_HELPERS 727 help 728 Say Y or M here if you want to enable support for the Samsung AMOLED 729 command mode panels found in the OnePlus 6/6T smartphones. 730 731 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 732 733config DRM_PANEL_SEIKO_43WVF1G 734 tristate "Seiko 43WVF1G panel" 735 depends on OF 736 depends on BACKLIGHT_CLASS_DEVICE 737 select VIDEOMODE_HELPERS 738 help 739 Say Y here if you want to enable support for the Seiko 740 43WVF1G controller for 800x480 LCD panels 741 742config DRM_PANEL_SHARP_LQ101R1SX01 743 tristate "Sharp LQ101R1SX01 panel" 744 depends on OF 745 depends on DRM_MIPI_DSI 746 depends on BACKLIGHT_CLASS_DEVICE 747 help 748 Say Y here if you want to enable support for Sharp LQ101R1SX01 749 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 750 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 751 the host and has a built-in LED backlight. 752 753 To compile this driver as a module, choose M here: the module 754 will be called panel-sharp-lq101r1sx01. 755 756config DRM_PANEL_SHARP_LS037V7DW01 757 tristate "Sharp LS037V7DW01 VGA LCD panel" 758 depends on GPIOLIB && OF && REGULATOR 759 help 760 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 761 (480x640) LCD panel (found on the TI SDP3430 board). 762 763config DRM_PANEL_SHARP_LS043T1LE01 764 tristate "Sharp LS043T1LE01 qHD video mode panel" 765 depends on OF 766 depends on DRM_MIPI_DSI 767 depends on BACKLIGHT_CLASS_DEVICE 768 help 769 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 770 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 771 772config DRM_PANEL_SHARP_LS060T1SX01 773 tristate "Sharp LS060T1SX01 FullHD video mode panel" 774 depends on OF 775 depends on DRM_MIPI_DSI 776 depends on BACKLIGHT_CLASS_DEVICE 777 help 778 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 779 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 780 Bundle. 781 782config DRM_PANEL_SITRONIX_ST7701 783 tristate "Sitronix ST7701 panel driver" 784 depends on OF 785 depends on DRM_MIPI_DSI 786 depends on BACKLIGHT_CLASS_DEVICE 787 help 788 Say Y here if you want to enable support for the Sitronix 789 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 790 system interfaces. 791 792config DRM_PANEL_SITRONIX_ST7703 793 tristate "Sitronix ST7703 based MIPI touchscreen panels" 794 depends on OF 795 depends on DRM_MIPI_DSI 796 depends on BACKLIGHT_CLASS_DEVICE 797 help 798 Say Y here if you want to enable support for Sitronix ST7703 based 799 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 800 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 801 in backlight and touch controller. 802 Touch input support is provided by the goodix driver and needs to be 803 selected separately. 804 805config DRM_PANEL_SITRONIX_ST7789V 806 tristate "Sitronix ST7789V panel" 807 depends on OF && SPI 808 depends on BACKLIGHT_CLASS_DEVICE 809 help 810 Say Y here if you want to enable support for the Sitronix 811 ST7789V controller for 240x320 LCD panels 812 813config DRM_PANEL_SONY_ACX565AKM 814 tristate "Sony ACX565AKM panel" 815 depends on GPIOLIB && OF && SPI 816 depends on BACKLIGHT_CLASS_DEVICE 817 help 818 Say Y here if you want to enable support for the Sony ACX565AKM 819 800x600 3.5" panel (found on the Nokia N900). 820 821config DRM_PANEL_SONY_TD4353_JDI 822 tristate "Sony TD4353 JDI panel" 823 depends on GPIOLIB && OF 824 depends on DRM_MIPI_DSI 825 depends on BACKLIGHT_CLASS_DEVICE 826 help 827 Say Y here if you want to enable support for the Sony Tama 828 TD4353 JDI command mode panel as found on some Sony Xperia 829 XZ2 and XZ2 Compact smartphones. 830 831config DRM_PANEL_SONY_TULIP_TRULY_NT35521 832 tristate "Sony Tulip Truly NT35521 panel" 833 depends on GPIOLIB && OF 834 depends on DRM_MIPI_DSI 835 depends on BACKLIGHT_CLASS_DEVICE 836 help 837 Say Y here if you want to enable support for the Sony Tulip 838 NT35521 1280x720 video mode panel as found on Sony Xperia M4 839 Aqua phone. 840 841config DRM_PANEL_STARTEK_KD070FHFID015 842 tristate "STARTEK KD070FHFID015 panel" 843 depends on OF 844 depends on DRM_MIPI_DSI 845 depends on BACKLIGHT_CLASS_DEVICE 846 help 847 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel 848 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display 849 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to 850 the host, a built-in LED backlight and touch controller. 851 852config DRM_PANEL_EDP 853 tristate "support for simple Embedded DisplayPort panels" 854 depends on OF 855 depends on BACKLIGHT_CLASS_DEVICE 856 depends on PM 857 select VIDEOMODE_HELPERS 858 select DRM_DISPLAY_DP_HELPER 859 select DRM_DISPLAY_HELPER 860 select DRM_DISPLAY_DP_AUX_BUS 861 select DRM_KMS_HELPER 862 help 863 DRM panel driver for dumb eDP panels that need at most a regulator and 864 a GPIO to be powered up. Optionally a backlight can be attached so 865 that it can be automatically turned off when the panel goes into a 866 low power state. 867 868config DRM_PANEL_SIMPLE 869 tristate "support for simple panels (other than eDP ones)" 870 depends on OF 871 depends on BACKLIGHT_CLASS_DEVICE 872 depends on PM 873 select VIDEOMODE_HELPERS 874 help 875 DRM panel driver for dumb non-eDP panels that need at most a regulator 876 and a GPIO to be powered up. Optionally a backlight can be attached so 877 that it can be automatically turned off when the panel goes into a 878 low power state. 879 880config DRM_PANEL_SYNAPTICS_R63353 881 tristate "Synaptics R63353-based panels" 882 depends on OF 883 depends on DRM_MIPI_DSI 884 depends on BACKLIGHT_CLASS_DEVICE 885 help 886 Say Y if you want to enable support for panels based on the 887 Synaptics R63353 controller. 888 889config DRM_PANEL_TDO_TL070WSH30 890 tristate "TDO TL070WSH30 DSI panel" 891 depends on OF 892 depends on DRM_MIPI_DSI 893 depends on BACKLIGHT_CLASS_DEVICE 894 help 895 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 896 panel module. The panel has a 1024×600 resolution and uses 897 24 bit RGB per pixel. It provides a MIPI DSI interface to 898 the host, a built-in LED backlight and touch controller. 899 900config DRM_PANEL_TPO_TD028TTEC1 901 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 902 depends on OF && SPI 903 depends on BACKLIGHT_CLASS_DEVICE 904 help 905 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 906 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 907 908config DRM_PANEL_TPO_TD043MTEA1 909 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 910 depends on GPIOLIB && OF && REGULATOR && SPI 911 help 912 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 913 4.3" panel (found on the OMAP3 Pandora board). 914 915config DRM_PANEL_TPO_TPG110 916 tristate "TPO TPG 800x400 panel" 917 depends on OF && SPI && GPIOLIB 918 depends on BACKLIGHT_CLASS_DEVICE 919 help 920 Say Y here if you want to enable support for TPO TPG110 921 400CH LTPS TFT LCD Single Chip Digital Driver for up to 922 800x400 LCD panels. 923 924config DRM_PANEL_TRULY_NT35597_WQXGA 925 tristate "Truly WQXGA" 926 depends on OF 927 depends on DRM_MIPI_DSI 928 help 929 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 930 Video Mode panel 931 932config DRM_PANEL_VISIONOX_R66451 933 tristate "Visionox R66451" 934 depends on OF 935 depends on DRM_MIPI_DSI 936 depends on BACKLIGHT_CLASS_DEVICE 937 select DRM_DISPLAY_DP_HELPER 938 select DRM_DISPLAY_HELPER 939 help 940 Say Y here if you want to enable support for Visionox 941 R66451 1080x2340 AMOLED DSI panel. 942 943config DRM_PANEL_VISIONOX_RM69299 944 tristate "Visionox RM69299" 945 depends on OF 946 depends on DRM_MIPI_DSI 947 help 948 Say Y here if you want to enable support for Visionox 949 RM69299 DSI Video Mode panel. 950 951config DRM_PANEL_VISIONOX_VTDR6130 952 tristate "Visionox VTDR6130" 953 depends on OF 954 depends on DRM_MIPI_DSI 955 depends on BACKLIGHT_CLASS_DEVICE 956 help 957 Say Y here if you want to enable support for Visionox 958 VTDR6130 1080x2400 AMOLED DSI panel. 959 960config DRM_PANEL_WIDECHIPS_WS2401 961 tristate "Widechips WS2401 DPI panel driver" 962 depends on SPI && GPIOLIB 963 depends on BACKLIGHT_CLASS_DEVICE 964 select DRM_MIPI_DBI 965 help 966 Say Y here if you want to enable support for the Widechips WS2401 DPI 967 480x800 display controller used in panels such as Samsung LMS380KF01. 968 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 969 970config DRM_PANEL_XINPENG_XPP055C272 971 tristate "Xinpeng XPP055C272 panel driver" 972 depends on OF 973 depends on DRM_MIPI_DSI 974 depends on BACKLIGHT_CLASS_DEVICE 975 help 976 Say Y here if you want to enable support for the Xinpeng 977 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 978 system interfaces. 979endmenu 980