1What: /sys/bus/pci/devices/<BDF>/qat/state 2Date: June 2022 3KernelVersion: 5.20 4Contact: [email protected] 5Description: Reports the current state of the QAT device and allows to 6 change it. 7 8 This attribute is RW. 9 10 Returned values: 11 up: the device is up and running 12 down: the device is down 13 14 Allowed values: 15 up: initialize and start the device 16 down: stop the device and bring it down 17 18 It is possible to transition the device from up to down only 19 if the device is up and vice versa. 20 21 This attribute is only available for qat_4xxx devices. 22 23What: /sys/bus/pci/devices/<BDF>/qat/cfg_services 24Date: June 2022 25KernelVersion: 5.20 26Contact: [email protected] 27Description: Reports the current configuration of the QAT device and allows 28 to change it. 29 30 This attribute is RW. 31 32 Returned values: 33 sym;asym: the device is configured for running 34 crypto services 35 dc: the device is configured for running 36 compression services 37 38 Allowed values: 39 sym;asym: configure the device for running 40 crypto services 41 dc: configure the device for running 42 compression services 43 44 It is possible to set the configuration only if the device 45 is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state) 46 47 The following example shows how to change the configuration of 48 a device configured for running crypto services in order to 49 run data compression:: 50 51 # cat /sys/bus/pci/devices/<BDF>/qat/state 52 up 53 # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services 54 sym;asym 55 # echo down > /sys/bus/pci/devices/<BDF>/qat/state 56 # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services 57 # echo up > /sys/bus/pci/devices/<BDF>/qat/state 58 # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services 59 dc 60 61 This attribute is only available for qat_4xxx devices. 62