xref: /freebsd-14.2/sys/dev/usb/usb_debug.c (revision 37506412)

/* $FreeBSD$ */
/*-
 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>

#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>

#include <dev/usb/usb_core.h>
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_transfer.h>

#include <ddb/ddb.h>
#include <ddb/db_sym.h>

/*
 * Define this unconditionally in case a kernel module is loaded that
 * has been compiled with debugging options.
 */
int	usb_debug = 0;

SYSCTL_NODE(_hw, OID_AUTO, usb, CTLFLAG_RW, 0, "USB debugging");
SYSCTL_INT(_hw_usb, OID_AUTO, debug, CTLFLAG_RW,
    &usb_debug, 0, "Debug level");

TUNABLE_INT("hw.usb.debug", &usb_debug);

#ifdef USB_DEBUG
/*
 * Sysctls to modify timings/delays
 */
static SYSCTL_NODE(_hw_usb, OID_AUTO, timings, CTLFLAG_RW, 0, "Timings");
static int usb_timings_sysctl_handler(SYSCTL_HANDLER_ARGS);

TUNABLE_INT("hw.usb.timings.port_reset_delay", (int *)&usb_port_reset_delay);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, port_reset_delay, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_port_reset_delay, sizeof(usb_port_reset_delay),
    usb_timings_sysctl_handler, "IU", "Port Reset Delay");
TUNABLE_INT("hw.usb.timings.port_root_reset_delay", (int *)&usb_port_root_reset_delay);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, port_root_reset_delay, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_port_root_reset_delay, sizeof(usb_port_root_reset_delay),
    usb_timings_sysctl_handler, "IU", "Root Port Reset Delay");
TUNABLE_INT("hw.usb.timings.port_reset_recovery", (int *)&usb_port_reset_recovery);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, port_reset_recovery, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_port_reset_recovery, sizeof(usb_port_reset_recovery),
    usb_timings_sysctl_handler, "IU", "Port Reset Recovery");
TUNABLE_INT("hw.usb.timings.port_powerup_delay", (int *)&usb_port_powerup_delay);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, port_powerup_delay, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_port_powerup_delay, sizeof(usb_port_powerup_delay),
    usb_timings_sysctl_handler, "IU", "Port PowerUp Delay");
TUNABLE_INT("hw.usb.timings.port_resume_delay", (int *)&usb_port_resume_delay);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, port_resume_delay, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_port_resume_delay, sizeof(usb_port_resume_delay),
    usb_timings_sysctl_handler, "IU", "Port Resume Delay");
TUNABLE_INT("hw.usb.timings.set_address_settle", (int *)&usb_set_address_settle);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, set_address_settle, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_set_address_settle, sizeof(usb_set_address_settle),
    usb_timings_sysctl_handler, "IU", "Set Address Settle");
TUNABLE_INT("hw.usb.timings.resume_delay", (int *)&usb_resume_delay);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, resume_delay, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_resume_delay, sizeof(usb_resume_delay),
    usb_timings_sysctl_handler, "IU", "Resume Delay");
TUNABLE_INT("hw.usb.timings.resume_wait", (int *)&usb_resume_wait);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, resume_wait, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_resume_wait, sizeof(usb_resume_wait),
    usb_timings_sysctl_handler, "IU", "Resume Wait");
TUNABLE_INT("hw.usb.timings.resume_recovery", (int *)&usb_resume_recovery);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, resume_recovery, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_resume_recovery, sizeof(usb_resume_recovery),
    usb_timings_sysctl_handler, "IU", "Resume Recovery");
TUNABLE_INT("hw.usb.timings.extra_power_up_time", (int *)&usb_extra_power_up_time);
SYSCTL_PROC(_hw_usb_timings, OID_AUTO, extra_power_up_time, CTLTYPE_UINT | CTLFLAG_RW,
    &usb_extra_power_up_time, sizeof(usb_extra_power_up_time),
    usb_timings_sysctl_handler, "IU", "Extra PowerUp Time");
#endif

/*------------------------------------------------------------------------*
 *	usb_dump_iface
 *
 * This function dumps information about an USB interface.
 *------------------------------------------------------------------------*/
void
usb_dump_iface(struct usb_interface *iface)
{
	printf("usb_dump_iface: iface=%p\n", iface);
	if (iface == NULL) {
		return;
	}
	printf(" iface=%p idesc=%p altindex=%d\n",
	    iface, iface->idesc, iface->alt_index);
}

/*------------------------------------------------------------------------*
 *	usb_dump_device
 *
 * This function dumps information about an USB device.
 *------------------------------------------------------------------------*/
void
usb_dump_device(struct usb_device *udev)
{
	printf("usb_dump_device: dev=%p\n", udev);
	if (udev == NULL) {
		return;
	}
	printf(" bus=%p \n"
	    " address=%d config=%d depth=%d speed=%d self_powered=%d\n"
	    " power=%d langid=%d\n",
	    udev->bus,
	    udev->address, udev->curr_config_no, udev->depth, udev->speed,
	    udev->flags.self_powered, udev->power, udev->langid);
}

/*------------------------------------------------------------------------*
 *	usb_dump_queue
 *
 * This function dumps the USB transfer that are queued up on an USB endpoint.
 *------------------------------------------------------------------------*/
void
usb_dump_queue(struct usb_endpoint *ep)
{
	struct usb_xfer *xfer;
	usb_stream_t x;

	printf("usb_dump_queue: endpoint=%p xfer: ", ep);
	for (x = 0; x != USB_MAX_EP_STREAMS; x++) {
		TAILQ_FOREACH(xfer, &ep->endpoint_q[x].head, wait_entry)
			printf(" %p", xfer);
	}
	printf("\n");
}

/*------------------------------------------------------------------------*
 *	usb_dump_endpoint
 *
 * This function dumps information about an USB endpoint.
 *------------------------------------------------------------------------*/
void
usb_dump_endpoint(struct usb_endpoint *ep)
{
	if (ep) {
		printf("usb_dump_endpoint: endpoint=%p", ep);

		printf(" edesc=%p isoc_next=%d toggle_next=%d",
		    ep->edesc, ep->isoc_next, ep->toggle_next);

		if (ep->edesc) {
			printf(" bEndpointAddress=0x%02x",
			    ep->edesc->bEndpointAddress);
		}
		printf("\n");
		usb_dump_queue(ep);
	} else {
		printf("usb_dump_endpoint: endpoint=NULL\n");
	}
}

/*------------------------------------------------------------------------*
 *	usb_dump_xfer
 *
 * This function dumps information about an USB transfer.
 *------------------------------------------------------------------------*/
void
usb_dump_xfer(struct usb_xfer *xfer)
{
	struct usb_device *udev;
	printf("usb_dump_xfer: xfer=%p\n", xfer);
	if (xfer == NULL) {
		return;
	}
	if (xfer->endpoint == NULL) {
		printf("xfer %p: endpoint=NULL\n",
		    xfer);
		return;
	}
	udev = xfer->xroot->udev;
	printf("xfer %p: udev=%p vid=0x%04x pid=0x%04x addr=%d "
	    "endpoint=%p ep=0x%02x attr=0x%02x\n",
	    xfer, udev,
	    UGETW(udev->ddesc.idVendor),
	    UGETW(udev->ddesc.idProduct),
	    udev->address, xfer->endpoint,
	    xfer->endpoint->edesc->bEndpointAddress,
	    xfer->endpoint->edesc->bmAttributes);
}

#ifdef USB_DEBUG
unsigned int usb_port_reset_delay	= USB_PORT_RESET_DELAY;
unsigned int usb_port_root_reset_delay	= USB_PORT_ROOT_RESET_DELAY;
unsigned int usb_port_reset_recovery	= USB_PORT_RESET_RECOVERY;
unsigned int usb_port_powerup_delay	= USB_PORT_POWERUP_DELAY;
unsigned int usb_port_resume_delay	= USB_PORT_RESUME_DELAY;
unsigned int usb_set_address_settle	= USB_SET_ADDRESS_SETTLE;
unsigned int usb_resume_delay		= USB_RESUME_DELAY;
unsigned int usb_resume_wait		= USB_RESUME_WAIT;
unsigned int usb_resume_recovery	= USB_RESUME_RECOVERY;
unsigned int usb_extra_power_up_time	= USB_EXTRA_POWER_UP_TIME;

/*------------------------------------------------------------------------*
 *	usb_timings_sysctl_handler
 *
 * This function updates timings variables, adjusting them where necessary.
 *------------------------------------------------------------------------*/
static int usb_timings_sysctl_handler(SYSCTL_HANDLER_ARGS)
{
	int error = 0;
	unsigned int val;

	/*
	 * Attempt to get a coherent snapshot by making a copy of the data.
	 */
	if (arg1)
		val = *(unsigned int *)arg1;
	else
		val = arg2;
	error = SYSCTL_OUT(req, &val, sizeof(int));
	if (error || !req->newptr)
		return (error);

	if (!arg1)
		return EPERM;

	error = SYSCTL_IN(req, &val, sizeof(unsigned int));
	if (error)
		return (error);

	/*
	 * Now make sure the values are decent, and certainly no lower than
	 * what the USB spec prescribes.
	 */
	unsigned int *p = (unsigned int *)arg1;
	if (p == &usb_port_reset_delay) {
		if (val < USB_PORT_RESET_DELAY_SPEC)
			return (EINVAL);
	} else if (p == &usb_port_root_reset_delay) {
		if (val < USB_PORT_ROOT_RESET_DELAY_SPEC)
			return (EINVAL);
	} else if (p == &usb_port_reset_recovery) {
		if (val < USB_PORT_RESET_RECOVERY_SPEC)
			return (EINVAL);
	} else if (p == &usb_port_powerup_delay) {
		if (val < USB_PORT_POWERUP_DELAY_SPEC)
			return (EINVAL);
	} else if (p == &usb_port_resume_delay) {
		if (val < USB_PORT_RESUME_DELAY_SPEC)
			return (EINVAL);
	} else if (p == &usb_set_address_settle) {
		if (val < USB_SET_ADDRESS_SETTLE_SPEC)
			return (EINVAL);
	} else if (p == &usb_resume_delay) {
		if (val < USB_RESUME_DELAY_SPEC)
			return (EINVAL);
	} else if (p == &usb_resume_wait) {
		if (val < USB_RESUME_WAIT_SPEC)
			return (EINVAL);
	} else if (p == &usb_resume_recovery) {
		if (val < USB_RESUME_RECOVERY_SPEC)
			return (EINVAL);
	} else if (p == &usb_extra_power_up_time) {
		if (val < USB_EXTRA_POWER_UP_TIME_SPEC)
			return (EINVAL);
	} else {
		/* noop */
	}

	*p = val;
	return 0;
}
#endif