1# 2# Option file for FreeBSD /usr/src builds, at least the userland and boot loader 3# portions of the tree. These options generally chose what parts of the tree to 4# include or omit and are FreeBSD source tree specific. 5# 6# Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf 7# and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no} 8# with sensible (usually) defaults. 9# 10# Makefiles must include bsd.opts.mk after defining specific MK_FOO options that 11# are applicable for that Makefile (typically there are none, but sometimes there 12# are exceptions). Recursive makes usually add MK_FOO=no for options that they wish 13# to omit from that make. 14# 15# Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO 16# variable. 17# 18# Makefiles may also assume that this file is included by src.opts.mk should it 19# need variables defined there prior to the end of the Makefile where 20# bsd.{subdir,lib.bin}.mk is traditionally included. 21# 22# The old-style YES_FOO and NO_FOO are being phased out. No new instances of them 23# should be added. Old instances should be removed since they were just to 24# bridge the gap between FreeBSD 4 and FreeBSD 5. 25# 26# Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an 27# exception is made for _WITHOUT_SRCONF which turns off this mechanism 28# completely inside bsd.*.mk files). 29# 30 31.if !target(__<src.opts.mk>__) 32__<src.opts.mk>__: 33 34.include <bsd.own.mk> 35 36# 37# Define MK_* variables (which are either "yes" or "no") for users 38# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the 39# make(1) environment. 40# These should be tested with `== "no"' or `!= "no"' in makefiles. 41# The NO_* variables should only be set by makefiles for variables 42# that haven't been converted over. 43# 44 45# These options are used by the src builds. Those listed in 46# __DEFAULT_YES_OPTIONS default to 'yes' and will build unless turned 47# off. __DEFAULT_NO_OPTIONS will default to 'no' and won't build 48# unless turned on. Any options listed in 'BROKEN_OPTIONS' will be 49# hard-wired to 'no'. "Broken" here means not working or 50# not-appropriate and/or not supported. It doesn't imply something is 51# wrong with the code. There's not a single good word for this, so 52# BROKEN was selected as the least imperfect one considered at the 53# time. Options are added to BROKEN_OPTIONS list on a per-arch basis. 54# At this time, there's no provision for mutually incompatible options. 55# Options listed in 'REQUIRED_OPTIONS' will be hard-wired to 'yes'; this 56# is intended as a transitional measure while options are in the process 57# of being removed. 58 59__DEFAULT_YES_OPTIONS = \ 60 ACCT \ 61 ACPI \ 62 APM \ 63 AT \ 64 AUDIT \ 65 AUTHPF \ 66 AUTOFS \ 67 BHYVE \ 68 BLACKLIST \ 69 BLUETOOTH \ 70 BOOT \ 71 BOOTPARAMD \ 72 BOOTPD \ 73 BSD_CPIO \ 74 BSDINSTALL \ 75 BSNMP \ 76 BZIP2 \ 77 CALENDAR \ 78 CAROOT \ 79 CCD \ 80 CDDL \ 81 CLANG \ 82 CLANG_BOOTSTRAP \ 83 CLEAN \ 84 CPP \ 85 CROSS_COMPILER \ 86 CRYPT \ 87 CUSE \ 88 CXGBETOOL \ 89 DIALOG \ 90 DICT \ 91 DMAGENT \ 92 DTRACE \ 93 DYNAMICROOT \ 94 EE \ 95 EFI \ 96 ELFTOOLCHAIN_BOOTSTRAP \ 97 EXAMPLES \ 98 FILE \ 99 FINGER \ 100 FLOPPY \ 101 FORTH \ 102 FP_LIBC \ 103 FREEBSD_UPDATE \ 104 FTP \ 105 GAMES \ 106 GH_BC \ 107 GNU_DIFF \ 108 GOOGLETEST \ 109 GPIO \ 110 HAST \ 111 HTML \ 112 HYPERV \ 113 ICONV \ 114 INET \ 115 INET6 \ 116 INETD \ 117 IPFILTER \ 118 IPFW \ 119 ISCSI \ 120 JAIL \ 121 KDUMP \ 122 KVM \ 123 LDNS \ 124 LDNS_UTILS \ 125 LEGACY_CONSOLE \ 126 LLD \ 127 LLD_BOOTSTRAP \ 128 LLD_IS_LD \ 129 LLVM_COV \ 130 LLVM_CXXFILT \ 131 LOADER_GELI \ 132 LOADER_KBOOT \ 133 LOADER_LUA \ 134 LOADER_OFW \ 135 LOADER_PXEBOOT \ 136 LOADER_UBOOT \ 137 LOCALES \ 138 LOCATE \ 139 LPR \ 140 LS_COLORS \ 141 MACHDEP_OPTIMIZATIONS \ 142 MAIL \ 143 MAILWRAPPER \ 144 MAKE \ 145 MLX5TOOL \ 146 NETCAT \ 147 NETGRAPH \ 148 NETLINK \ 149 NETLINK_SUPPORT \ 150 NLS_CATALOGS \ 151 NS_CACHING \ 152 NTP \ 153 NUAGEINIT \ 154 OFED \ 155 OPENSSL \ 156 PAM \ 157 PF \ 158 PKGBOOTSTRAP \ 159 PMC \ 160 PPP \ 161 PTHREADS_ASSERTIONS \ 162 QUOTAS \ 163 RADIUS_SUPPORT \ 164 RBOOTD \ 165 REPRODUCIBLE_BUILD \ 166 RESCUE \ 167 ROUTED \ 168 SENDMAIL \ 169 SERVICESDB \ 170 SETUID_LOGIN \ 171 SHAREDOCS \ 172 SOURCELESS \ 173 SOURCELESS_HOST \ 174 SOURCELESS_UCODE \ 175 STATS \ 176 SYSCONS \ 177 SYSTEM_COMPILER \ 178 SYSTEM_LINKER \ 179 TALK \ 180 TCP_WRAPPERS \ 181 TCSH \ 182 TELNET \ 183 TEXTPROC \ 184 TFTP \ 185 UNBOUND \ 186 USB \ 187 UTMPX \ 188 VI \ 189 VT \ 190 WIRELESS \ 191 WPA_SUPPLICANT_EAPOL \ 192 ZFS \ 193 LOADER_ZFS \ 194 ZONEINFO 195 196__DEFAULT_NO_OPTIONS = \ 197 BEARSSL \ 198 BHYVE_SNAPSHOT \ 199 CLANG_EXTRAS \ 200 CLANG_FORMAT \ 201 DETECT_TZ_CHANGES \ 202 DISK_IMAGE_TOOLS_BOOTSTRAP \ 203 DTRACE_ASAN \ 204 DTRACE_TESTS \ 205 EXPERIMENTAL \ 206 HESIOD \ 207 LOADER_BIOS_TEXTONLY \ 208 LOADER_VERBOSE \ 209 LOADER_VERIEXEC_PASS_MANIFEST \ 210 LLVM_ASSERTIONS \ 211 LLVM_BINUTILS \ 212 LLVM_FULL_DEBUGINFO \ 213 MALLOC_PRODUCTION \ 214 OFED_EXTRA \ 215 OPENLDAP \ 216 RPCBIND_WARMSTART_SUPPORT \ 217 SORT_THREADS \ 218 ZONEINFO_LEAPSECONDS_SUPPORT \ 219 220__REQUIRED_OPTIONS = \ 221 CAPSICUM \ 222 CASPER 223 224# LEFT/RIGHT. Left options which default to "yes" unless their corresponding 225# RIGHT option is disabled. 226__DEFAULT_DEPENDENT_OPTIONS= \ 227 CLANG_FULL/CLANG \ 228 LLVM_TARGET_ALL/CLANG \ 229 LOADER_VERIEXEC/BEARSSL \ 230 LOADER_EFI_SECUREBOOT/LOADER_VERIEXEC \ 231 LOADER_VERIEXEC_VECTX/LOADER_VERIEXEC \ 232 VERIEXEC/BEARSSL \ 233 234# MK_*_SUPPORT options which default to "yes" unless their corresponding 235# MK_* variable is set to "no". 236# 237.for var in \ 238 BLACKLIST \ 239 BZIP2 \ 240 INET \ 241 INET6 \ 242 KERBEROS \ 243 KVM \ 244 NETGRAPH \ 245 PAM \ 246 TESTS \ 247 WIRELESS 248__DEFAULT_DEPENDENT_OPTIONS+= ${var}_SUPPORT/${var} 249.endfor 250 251# 252# Default behaviour of some options depends on the architecture. Unfortunately 253# this means that we have to test TARGET_ARCH (the buildworld case) as well 254# as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not 255# used at all in bsd.*.mk, but we have to make an exception here if we want 256# to allow defaults for some things like clang to vary by target architecture. 257# Additional, per-target behavior should be rarely added only after much 258# gnashing of teeth and grinding of gears. 259# 260.if defined(TARGET_ARCH) 261__T=${TARGET_ARCH} 262.else 263__T=${MACHINE_ARCH} 264.endif 265 266# All supported backends for LLVM_TARGET_XXX 267__LLVM_TARGETS= \ 268 aarch64 \ 269 arm \ 270 powerpc \ 271 riscv \ 272 x86 273__LLVM_TARGET_FILT= C/(amd64|i386)/x86/:C/powerpc.*/powerpc/:C/armv[67]/arm/:C/riscv.*/riscv/ 274.for __llt in ${__LLVM_TARGETS} 275# Default enable the given TARGET's LLVM_TARGET support 276.if ${__T:${__LLVM_TARGET_FILT}} == ${__llt} 277__DEFAULT_YES_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu} 278# aarch64 needs arm for -m32 support. 279.elif ${__T} == "aarch64" && ${__llt:Marm*} != "" 280__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_ARM/LLVM_TARGET_AARCH64 281# Default the rest of the LLVM_TARGETs to the value of MK_LLVM_TARGET_ALL. 282.else 283__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}/LLVM_TARGET_ALL 284.endif 285.endfor 286 287__DEFAULT_NO_OPTIONS+=LLVM_TARGET_BPF LLVM_TARGET_MIPS 288 289.include <bsd.compiler.mk> 290 291.if ${__T} == "i386" || ${__T} == "amd64" 292__DEFAULT_NO_OPTIONS += FDT 293.else 294__DEFAULT_YES_OPTIONS += FDT 295.endif 296 297.if ${__T:Marm*} == "" && ${__T:Mriscv64*} == "" 298__DEFAULT_YES_OPTIONS+=LLDB 299.else 300__DEFAULT_NO_OPTIONS+=LLDB 301.endif 302# LIB32 is not supported on all 64-bit architectures. 303.if (${__T} == "amd64" || ${__T:Maarch64*} != "" || ${__T} == "powerpc64") 304__DEFAULT_YES_OPTIONS+=LIB32 305.else 306BROKEN_OPTIONS+=LIB32 307.endif 308# EFI doesn't exist on powerpc (well, officially) and doesn't work on i386 309.if ${__T:Mpowerpc*} || ${__T} == "i386" 310BROKEN_OPTIONS+=EFI 311.endif 312# OFW is only for powerpc, exclude others 313.if ${__T:Mpowerpc*} == "" 314BROKEN_OPTIONS+=LOADER_OFW 315.endif 316# KBOOT is only for powerpc64 (powerpc64le broken) amd64 and aarch64 317.if ${__T} != "powerpc64" && ${__T} != "amd64" && ${__T} != "aarch64" 318BROKEN_OPTIONS+=LOADER_KBOOT 319.endif 320# UBOOT is only for arm, and big-endian powerpc 321.if (${__T:Marm*} == "" && ${__T:Mpowerpc*} == "") || ${__T} == "powerpc64le" 322BROKEN_OPTIONS+=LOADER_UBOOT 323.endif 324# GELI and Lua in loader currently cause boot failures on powerpc. 325# Further debugging is required -- probably they are just broken on big 326# endian systems generically (they jump to null pointers or try to read 327# crazy high addresses, which is typical of endianness problems). 328.if ${__T:Mpowerpc*} 329BROKEN_OPTIONS+=LOADER_GELI LOADER_LUA 330.endif 331 332# Kernel TLS is enabled by default on amd64, aarch64 and powerpc64* 333.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T:Mpowerpc64*} != "" 334__DEFAULT_YES_OPTIONS+=OPENSSL_KTLS 335.else 336__DEFAULT_NO_OPTIONS+=OPENSSL_KTLS 337.endif 338 339.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ 340 ${__T:Mpowerpc64*} == "" 341BROKEN_OPTIONS+=CXGBETOOL 342BROKEN_OPTIONS+=MLX5TOOL 343.endif 344 345.if ${__T} != "amd64" && ${__T} != "i386" && ${__T} != "aarch64" 346BROKEN_OPTIONS+=HYPERV 347.endif 348 349.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \ 350 ${__T:Mpowerpc64*} != "" || ${__T:Mriscv64*} != "" 351__DEFAULT_YES_OPTIONS+=OPENMP 352.else 353__DEFAULT_NO_OPTIONS+=OPENMP 354.endif 355 356# Broken on 32-bit arm, kernel module compile errors 357.if ${__T:Marm*} != "" 358BROKEN_OPTIONS+= OFED 359.endif 360 361# MK_host_egacy is set by local.sys.mk so is valid here 362.if ${MACHINE} == "host" && ${MK_host_egacy} == "yes" 363# we cannot expect tests to work 364BROKEN_OPTIONS+= TESTS 365.endif 366 367.-include <site.src.opts.mk> 368 369.include <bsd.mkopt.mk> 370 371# 372# Force some options off if their dependencies are off. 373# Order is somewhat important. 374# 375.if ${MK_CAPSICUM} == "no" 376MK_CASPER:= no 377.endif 378 379.if ${MK_SOURCELESS} == "no" 380MK_SOURCELESS_HOST:= no 381MK_SOURCELESS_UCODE:= no 382.endif 383 384.if ${MK_CDDL} == "no" 385MK_CTF:= no 386MK_DTRACE:= no 387MK_LOADER_ZFS:= no 388MK_ZFS:= no 389.endif 390 391.if ${MK_CRYPT} == "no" 392MK_OPENSSL:= no 393MK_OPENSSH:= no 394MK_KERBEROS:= no 395MK_KERBEROS_SUPPORT:= no 396.endif 397 398.if ${MK_DIALOG} == "no" 399MK_BSDINSTALL:= no 400.endif 401 402.if ${MK_DTRACE} == "no" 403MK_CTF:= no 404.endif 405 406.if ${MK_MAIL} == "no" 407MK_MAILWRAPPER:= no 408MK_SENDMAIL:= no 409MK_DMAGENT:= no 410.endif 411 412.if ${MK_NETGRAPH} == "no" 413MK_BLUETOOTH:= no 414.endif 415 416.if ${MK_NLS} == "no" 417MK_NLS_CATALOGS:= no 418.endif 419 420.if ${MK_OPENSSL} == "no" 421MK_DMAGENT:= no 422MK_OPENSSH:= no 423MK_OPENSSL_KTLS:= no 424MK_KERBEROS:= no 425MK_KERBEROS_SUPPORT:= no 426MK_LDNS:= no 427MK_PKGBOOTSTRAP:= no 428MK_LOADER_ZFS:= no 429MK_ZFS:= no 430.endif 431 432.if ${MK_LDNS} == "no" 433MK_LDNS_UTILS:= no 434MK_UNBOUND:= no 435.endif 436 437.if ${MK_PF} == "no" 438MK_AUTHPF:= no 439.endif 440 441.if ${MK_OFED} == "no" 442MK_OFED_EXTRA:= no 443.endif 444 445.if ${MK_TESTS} == "no" 446MK_DTRACE_TESTS:= no 447.endif 448 449.if ${MK_TESTS_SUPPORT} == "no" 450MK_GOOGLETEST:= no 451.endif 452 453.if ${MK_ZONEINFO} == "no" 454MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no 455.endif 456 457.if ${MK_CROSS_COMPILER} == "no" 458MK_CLANG_BOOTSTRAP:= no 459MK_ELFTOOLCHAIN_BOOTSTRAP:= no 460MK_LLD_BOOTSTRAP:= no 461.endif 462 463.if ${MK_TOOLCHAIN} == "no" 464MK_CLANG:= no 465MK_LLD:= no 466MK_LLDB:= no 467MK_LLVM_BINUTILS:= no 468.endif 469 470.if ${MK_CLANG} == "no" 471MK_CLANG_EXTRAS:= no 472MK_CLANG_FORMAT:= no 473MK_CLANG_FULL:= no 474MK_LLVM_COV:= no 475.endif 476 477.if ${MK_ASAN} == "yes" 478# In order to get sensible backtraces from ASAN we have to install 479# llvm-symbolizer as /usr/bin/addr2line instead of the elftoolchain version. 480MK_LLVM_BINUTILS:= yes 481.endif 482 483.if ${MK_LLVM_BINUTILS} == "yes" 484# MK_LLVM_CXXFILT is a subset of MK_LLVM_BINUTILS and should therefore be 485# enabled if MK_LLVM_BINUTILS is set. 486MK_LLVM_CXXFILT:= yes 487.endif 488 489.if ${MK_LOADER_VERIEXEC} == "no" 490MK_LOADER_VERIEXEC_PASS_MANIFEST := no 491.endif 492 493# 494# MK_* options whose default value depends on another option. 495# 496.for vv in \ 497 GSSAPI/KERBEROS \ 498 MAN_UTILS/MAN 499.if defined(WITH_${vv:H}) 500MK_${vv:H}:= yes 501.elif defined(WITHOUT_${vv:H}) 502MK_${vv:H}:= no 503.else 504MK_${vv:H}:= ${MK_${vv:T}} 505.endif 506.endfor 507 508# 509# Set defaults for the MK_*_SUPPORT variables. 510# 511 512.endif # !target(__<src.opts.mk>__) 513