1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2006 M. Warner Losh. All rights reserved. 5 * Copyright (c) 2009 Oleksandr Tymoshenko. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 #include "opt_platform.h" 32 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/bio.h> 36 #include <sys/bus.h> 37 #include <sys/conf.h> 38 #include <sys/kernel.h> 39 #include <sys/kthread.h> 40 #include <sys/lock.h> 41 #include <sys/mbuf.h> 42 #include <sys/malloc.h> 43 #include <sys/module.h> 44 #include <sys/mutex.h> 45 #include <geom/geom_disk.h> 46 47 #ifdef FDT 48 #include <dev/fdt/fdt_common.h> 49 #include <dev/ofw/ofw_bus_subr.h> 50 #include <dev/ofw/openfirm.h> 51 #endif 52 53 #include <dev/spibus/spi.h> 54 #include "spibus_if.h" 55 56 #include <dev/flash/mx25lreg.h> 57 58 #define FL_NONE 0x00 59 #define FL_ERASE_4K 0x01 60 #define FL_ERASE_32K 0x02 61 #define FL_ENABLE_4B_ADDR 0x04 62 #define FL_DISABLE_4B_ADDR 0x08 63 64 /* 65 * Define the sectorsize to be a smaller size rather than the flash 66 * sector size. Trying to run FFS off of a 64k flash sector size 67 * results in a completely un-usable system. 68 */ 69 #define MX25L_SECTORSIZE 512 70 71 struct mx25l_flash_ident 72 { 73 const char *name; 74 uint8_t manufacturer_id; 75 uint16_t device_id; 76 unsigned int sectorsize; 77 unsigned int sectorcount; 78 unsigned int flags; 79 }; 80 81 struct mx25l_softc 82 { 83 device_t sc_dev; 84 uint8_t sc_manufacturer_id; 85 uint16_t sc_device_id; 86 unsigned int sc_sectorsize; 87 struct mtx sc_mtx; 88 struct disk *sc_disk; 89 struct proc *sc_p; 90 struct bio_queue_head sc_bio_queue; 91 unsigned int sc_flags; 92 unsigned int sc_taskstate; 93 uint8_t sc_dummybuf[FLASH_PAGE_SIZE]; 94 }; 95 96 #define TSTATE_STOPPED 0 97 #define TSTATE_STOPPING 1 98 #define TSTATE_RUNNING 2 99 100 #define M25PXX_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx) 101 #define M25PXX_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx) 102 #define M25PXX_LOCK_INIT(_sc) \ 103 mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->sc_dev), \ 104 "mx25l", MTX_DEF) 105 #define M25PXX_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx); 106 #define M25PXX_ASSERT_LOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_OWNED); 107 #define M25PXX_ASSERT_UNLOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_NOTOWNED); 108 109 /* disk routines */ 110 static int mx25l_open(struct disk *dp); 111 static int mx25l_close(struct disk *dp); 112 static int mx25l_ioctl(struct disk *, u_long, void *, int, struct thread *); 113 static void mx25l_strategy(struct bio *bp); 114 static int mx25l_getattr(struct bio *bp); 115 static void mx25l_task(void *arg); 116 117 struct mx25l_flash_ident flash_devices[] = { 118 { "en25f32", 0x1c, 0x3116, 64 * 1024, 64, FL_NONE }, 119 { "en25p32", 0x1c, 0x2016, 64 * 1024, 64, FL_NONE }, 120 { "en25p64", 0x1c, 0x2017, 64 * 1024, 128, FL_NONE }, 121 { "en25q32", 0x1c, 0x3016, 64 * 1024, 64, FL_NONE }, 122 { "en25q64", 0x1c, 0x3017, 64 * 1024, 128, FL_ERASE_4K }, 123 { "m25p32", 0x20, 0x2016, 64 * 1024, 64, FL_NONE }, 124 { "m25p64", 0x20, 0x2017, 64 * 1024, 128, FL_NONE }, 125 { "mx25ll32", 0xc2, 0x2016, 64 * 1024, 64, FL_NONE }, 126 { "mx25ll64", 0xc2, 0x2017, 64 * 1024, 128, FL_NONE }, 127 { "mx25ll128", 0xc2, 0x2018, 64 * 1024, 256, FL_ERASE_4K | FL_ERASE_32K }, 128 { "mx25ll256", 0xc2, 0x2019, 64 * 1024, 512, FL_ERASE_4K | FL_ERASE_32K | FL_ENABLE_4B_ADDR }, 129 { "s25fl032", 0x01, 0x0215, 64 * 1024, 64, FL_NONE }, 130 { "s25fl064", 0x01, 0x0216, 64 * 1024, 128, FL_NONE }, 131 { "s25fl128", 0x01, 0x2018, 64 * 1024, 256, FL_NONE }, 132 { "s25fl256s", 0x01, 0x0219, 64 * 1024, 512, FL_NONE }, 133 { "SST25VF010A", 0xbf, 0x2549, 4 * 1024, 32, FL_ERASE_4K | FL_ERASE_32K }, 134 { "SST25VF032B", 0xbf, 0x254a, 64 * 1024, 64, FL_ERASE_4K | FL_ERASE_32K }, 135 136 /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ 137 { "w25x32", 0xef, 0x3016, 64 * 1024, 64, FL_ERASE_4K }, 138 { "w25x64", 0xef, 0x3017, 64 * 1024, 128, FL_ERASE_4K }, 139 { "w25q32", 0xef, 0x4016, 64 * 1024, 64, FL_ERASE_4K }, 140 { "w25q64", 0xef, 0x4017, 64 * 1024, 128, FL_ERASE_4K }, 141 { "w25q64bv", 0xef, 0x4017, 64 * 1024, 128, FL_ERASE_4K }, 142 { "w25q128", 0xef, 0x4018, 64 * 1024, 256, FL_ERASE_4K }, 143 { "w25q256", 0xef, 0x4019, 64 * 1024, 512, FL_ERASE_4K }, 144 145 /* Atmel */ 146 { "at25df641", 0x1f, 0x4800, 64 * 1024, 128, FL_ERASE_4K }, 147 148 /* GigaDevice */ 149 { "gd25q64", 0xc8, 0x4017, 64 * 1024, 128, FL_ERASE_4K }, 150 }; 151 152 static uint8_t 153 mx25l_get_status(device_t dev) 154 { 155 uint8_t txBuf[2], rxBuf[2]; 156 struct spi_command cmd; 157 int err; 158 159 memset(&cmd, 0, sizeof(cmd)); 160 memset(txBuf, 0, sizeof(txBuf)); 161 memset(rxBuf, 0, sizeof(rxBuf)); 162 163 txBuf[0] = CMD_READ_STATUS; 164 cmd.tx_cmd = txBuf; 165 cmd.rx_cmd = rxBuf; 166 cmd.rx_cmd_sz = 2; 167 cmd.tx_cmd_sz = 2; 168 err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd); 169 return (rxBuf[1]); 170 } 171 172 static void 173 mx25l_wait_for_device_ready(device_t dev) 174 { 175 while ((mx25l_get_status(dev) & STATUS_WIP)) 176 continue; 177 } 178 179 static struct mx25l_flash_ident* 180 mx25l_get_device_ident(struct mx25l_softc *sc) 181 { 182 device_t dev = sc->sc_dev; 183 uint8_t txBuf[8], rxBuf[8]; 184 struct spi_command cmd; 185 uint8_t manufacturer_id; 186 uint16_t dev_id; 187 int err, i; 188 189 memset(&cmd, 0, sizeof(cmd)); 190 memset(txBuf, 0, sizeof(txBuf)); 191 memset(rxBuf, 0, sizeof(rxBuf)); 192 193 txBuf[0] = CMD_READ_IDENT; 194 cmd.tx_cmd = &txBuf; 195 cmd.rx_cmd = &rxBuf; 196 /* 197 * Some compatible devices has extended two-bytes ID 198 * We'll use only manufacturer/deviceid atm 199 */ 200 cmd.tx_cmd_sz = 4; 201 cmd.rx_cmd_sz = 4; 202 err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd); 203 if (err) 204 return (NULL); 205 206 manufacturer_id = rxBuf[1]; 207 dev_id = (rxBuf[2] << 8) | (rxBuf[3]); 208 209 for (i = 0; 210 i < nitems(flash_devices); i++) { 211 if ((flash_devices[i].manufacturer_id == manufacturer_id) && 212 (flash_devices[i].device_id == dev_id)) 213 return &flash_devices[i]; 214 } 215 216 printf("Unknown SPI flash device. Vendor: %02x, device id: %04x\n", 217 manufacturer_id, dev_id); 218 return (NULL); 219 } 220 221 static void 222 mx25l_set_writable(device_t dev, int writable) 223 { 224 uint8_t txBuf[1], rxBuf[1]; 225 struct spi_command cmd; 226 int err; 227 228 memset(&cmd, 0, sizeof(cmd)); 229 memset(txBuf, 0, sizeof(txBuf)); 230 memset(rxBuf, 0, sizeof(rxBuf)); 231 232 txBuf[0] = writable ? CMD_WRITE_ENABLE : CMD_WRITE_DISABLE; 233 cmd.tx_cmd = txBuf; 234 cmd.rx_cmd = rxBuf; 235 cmd.rx_cmd_sz = 1; 236 cmd.tx_cmd_sz = 1; 237 err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd); 238 } 239 240 static void 241 mx25l_erase_cmd(device_t dev, off_t sector, uint8_t ecmd) 242 { 243 struct mx25l_softc *sc; 244 uint8_t txBuf[5], rxBuf[5]; 245 struct spi_command cmd; 246 int err; 247 248 sc = device_get_softc(dev); 249 250 mx25l_wait_for_device_ready(dev); 251 mx25l_set_writable(dev, 1); 252 253 memset(&cmd, 0, sizeof(cmd)); 254 memset(txBuf, 0, sizeof(txBuf)); 255 memset(rxBuf, 0, sizeof(rxBuf)); 256 257 txBuf[0] = ecmd; 258 cmd.tx_cmd = txBuf; 259 cmd.rx_cmd = rxBuf; 260 if (sc->sc_flags & FL_ENABLE_4B_ADDR) { 261 cmd.rx_cmd_sz = 5; 262 cmd.tx_cmd_sz = 5; 263 txBuf[1] = ((sector >> 24) & 0xff); 264 txBuf[2] = ((sector >> 16) & 0xff); 265 txBuf[3] = ((sector >> 8) & 0xff); 266 txBuf[4] = (sector & 0xff); 267 } else { 268 cmd.rx_cmd_sz = 4; 269 cmd.tx_cmd_sz = 4; 270 txBuf[1] = ((sector >> 16) & 0xff); 271 txBuf[2] = ((sector >> 8) & 0xff); 272 txBuf[3] = (sector & 0xff); 273 } 274 err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd); 275 } 276 277 static int 278 mx25l_write(device_t dev, off_t offset, caddr_t data, off_t count) 279 { 280 struct mx25l_softc *sc; 281 uint8_t txBuf[8], rxBuf[8]; 282 struct spi_command cmd; 283 off_t write_offset; 284 long bytes_to_write, bytes_writen; 285 device_t pdev; 286 int err = 0; 287 288 pdev = device_get_parent(dev); 289 sc = device_get_softc(dev); 290 291 if (sc->sc_flags & FL_ENABLE_4B_ADDR) { 292 cmd.tx_cmd_sz = 5; 293 cmd.rx_cmd_sz = 5; 294 } else { 295 cmd.tx_cmd_sz = 4; 296 cmd.rx_cmd_sz = 4; 297 } 298 299 bytes_writen = 0; 300 write_offset = offset; 301 302 /* 303 * Use the erase sectorsize here since blocks are fully erased 304 * first before they're written to. 305 */ 306 if (count % sc->sc_sectorsize != 0 || offset % sc->sc_sectorsize != 0) 307 return (EIO); 308 309 /* 310 * Assume here that we write per-sector only 311 * and sector size should be 256 bytes aligned 312 */ 313 KASSERT(write_offset % FLASH_PAGE_SIZE == 0, 314 ("offset for BIO_WRITE is not page size (%d bytes) aligned", 315 FLASH_PAGE_SIZE)); 316 317 /* 318 * Maximum write size for CMD_PAGE_PROGRAM is 319 * FLASH_PAGE_SIZE, so split data to chunks 320 * FLASH_PAGE_SIZE bytes eash and write them 321 * one by one 322 */ 323 while (bytes_writen < count) { 324 /* 325 * If we crossed sector boundary - erase next sector 326 */ 327 if (((offset + bytes_writen) % sc->sc_sectorsize) == 0) 328 mx25l_erase_cmd(dev, offset + bytes_writen, CMD_SECTOR_ERASE); 329 330 txBuf[0] = CMD_PAGE_PROGRAM; 331 if (sc->sc_flags & FL_ENABLE_4B_ADDR) { 332 txBuf[1] = ((write_offset >> 24) & 0xff); 333 txBuf[2] = ((write_offset >> 16) & 0xff); 334 txBuf[3] = ((write_offset >> 8) & 0xff); 335 txBuf[4] = (write_offset & 0xff); 336 } else { 337 txBuf[1] = ((write_offset >> 16) & 0xff); 338 txBuf[2] = ((write_offset >> 8) & 0xff); 339 txBuf[3] = (write_offset & 0xff); 340 } 341 342 bytes_to_write = MIN(FLASH_PAGE_SIZE, 343 count - bytes_writen); 344 cmd.tx_cmd = txBuf; 345 cmd.rx_cmd = rxBuf; 346 cmd.tx_data = data + bytes_writen; 347 cmd.tx_data_sz = bytes_to_write; 348 cmd.rx_data = sc->sc_dummybuf; 349 cmd.rx_data_sz = bytes_to_write; 350 351 /* 352 * Eash completed write operation resets WEL 353 * (write enable latch) to disabled state, 354 * so we re-enable it here 355 */ 356 mx25l_wait_for_device_ready(dev); 357 mx25l_set_writable(dev, 1); 358 359 err = SPIBUS_TRANSFER(pdev, dev, &cmd); 360 if (err) 361 break; 362 363 bytes_writen += bytes_to_write; 364 write_offset += bytes_to_write; 365 } 366 367 return (err); 368 } 369 370 static int 371 mx25l_read(device_t dev, off_t offset, caddr_t data, off_t count) 372 { 373 struct mx25l_softc *sc; 374 uint8_t txBuf[8], rxBuf[8]; 375 struct spi_command cmd; 376 device_t pdev; 377 int err = 0; 378 379 pdev = device_get_parent(dev); 380 sc = device_get_softc(dev); 381 382 /* 383 * Enforce the disk read sectorsize not the erase sectorsize. 384 * In this way, smaller read IO is possible,dramatically 385 * speeding up filesystem/geom_compress access. 386 */ 387 if (count % sc->sc_disk->d_sectorsize != 0 388 || offset % sc->sc_disk->d_sectorsize != 0) 389 return (EIO); 390 391 txBuf[0] = CMD_FAST_READ; 392 if (sc->sc_flags & FL_ENABLE_4B_ADDR) { 393 cmd.tx_cmd_sz = 6; 394 cmd.rx_cmd_sz = 6; 395 396 txBuf[1] = ((offset >> 24) & 0xff); 397 txBuf[2] = ((offset >> 16) & 0xff); 398 txBuf[3] = ((offset >> 8) & 0xff); 399 txBuf[4] = (offset & 0xff); 400 /* Dummy byte */ 401 txBuf[5] = 0; 402 } else { 403 cmd.tx_cmd_sz = 5; 404 cmd.rx_cmd_sz = 5; 405 406 txBuf[1] = ((offset >> 16) & 0xff); 407 txBuf[2] = ((offset >> 8) & 0xff); 408 txBuf[3] = (offset & 0xff); 409 /* Dummy byte */ 410 txBuf[4] = 0; 411 } 412 413 cmd.tx_cmd = txBuf; 414 cmd.rx_cmd = rxBuf; 415 cmd.tx_data = data; 416 cmd.tx_data_sz = count; 417 cmd.rx_data = data; 418 cmd.rx_data_sz = count; 419 420 err = SPIBUS_TRANSFER(pdev, dev, &cmd); 421 422 return (err); 423 } 424 425 static int 426 mx25l_set_4b_mode(device_t dev, uint8_t command) 427 { 428 uint8_t txBuf[1], rxBuf[1]; 429 struct spi_command cmd; 430 device_t pdev; 431 int err; 432 433 memset(&cmd, 0, sizeof(cmd)); 434 memset(txBuf, 0, sizeof(txBuf)); 435 memset(rxBuf, 0, sizeof(rxBuf)); 436 437 pdev = device_get_parent(dev); 438 439 cmd.tx_cmd_sz = cmd.rx_cmd_sz = 1; 440 441 cmd.tx_cmd = txBuf; 442 cmd.rx_cmd = rxBuf; 443 444 txBuf[0] = command; 445 446 err = SPIBUS_TRANSFER(pdev, dev, &cmd); 447 448 mx25l_wait_for_device_ready(dev); 449 450 return (err); 451 } 452 453 #ifdef FDT 454 static struct ofw_compat_data compat_data[] = { 455 { "st,m25p", 1 }, 456 { "jedec,spi-nor", 1 }, 457 { NULL, 0 }, 458 }; 459 #endif 460 461 static int 462 mx25l_probe(device_t dev) 463 { 464 #ifdef FDT 465 int i; 466 467 if (!ofw_bus_status_okay(dev)) 468 return (ENXIO); 469 470 /* First try to match the compatible property to the compat_data */ 471 if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 1) 472 goto found; 473 474 /* 475 * Next, try to find a compatible device using the names in the 476 * flash_devices structure 477 */ 478 for (i = 0; i < nitems(flash_devices); i++) 479 if (ofw_bus_is_compatible(dev, flash_devices[i].name)) 480 goto found; 481 482 return (ENXIO); 483 found: 484 #endif 485 device_set_desc(dev, "M25Pxx Flash Family"); 486 487 return (0); 488 } 489 490 static int 491 mx25l_attach(device_t dev) 492 { 493 struct mx25l_softc *sc; 494 struct mx25l_flash_ident *ident; 495 496 sc = device_get_softc(dev); 497 sc->sc_dev = dev; 498 M25PXX_LOCK_INIT(sc); 499 500 ident = mx25l_get_device_ident(sc); 501 if (ident == NULL) 502 return (ENXIO); 503 504 mx25l_wait_for_device_ready(sc->sc_dev); 505 506 sc->sc_disk = disk_alloc(); 507 sc->sc_disk->d_open = mx25l_open; 508 sc->sc_disk->d_close = mx25l_close; 509 sc->sc_disk->d_strategy = mx25l_strategy; 510 sc->sc_disk->d_getattr = mx25l_getattr; 511 sc->sc_disk->d_ioctl = mx25l_ioctl; 512 sc->sc_disk->d_name = "flash/spi"; 513 sc->sc_disk->d_drv1 = sc; 514 sc->sc_disk->d_maxsize = DFLTPHYS; 515 sc->sc_disk->d_sectorsize = MX25L_SECTORSIZE; 516 sc->sc_disk->d_mediasize = ident->sectorsize * ident->sectorcount; 517 sc->sc_disk->d_unit = device_get_unit(sc->sc_dev); 518 sc->sc_disk->d_dump = NULL; /* NB: no dumps */ 519 /* Sectorsize for erase operations */ 520 sc->sc_sectorsize = ident->sectorsize; 521 sc->sc_flags = ident->flags; 522 523 if (sc->sc_flags & FL_ENABLE_4B_ADDR) 524 mx25l_set_4b_mode(dev, CMD_ENTER_4B_MODE); 525 526 if (sc->sc_flags & FL_DISABLE_4B_ADDR) 527 mx25l_set_4b_mode(dev, CMD_EXIT_4B_MODE); 528 529 /* NB: use stripesize to hold the erase/region size for RedBoot */ 530 sc->sc_disk->d_stripesize = ident->sectorsize; 531 532 disk_create(sc->sc_disk, DISK_VERSION); 533 bioq_init(&sc->sc_bio_queue); 534 535 kproc_create(&mx25l_task, sc, &sc->sc_p, 0, 0, "task: mx25l flash"); 536 sc->sc_taskstate = TSTATE_RUNNING; 537 538 device_printf(sc->sc_dev, "%s, sector %d bytes, %d sectors\n", 539 ident->name, ident->sectorsize, ident->sectorcount); 540 541 return (0); 542 } 543 544 static int 545 mx25l_detach(device_t dev) 546 { 547 struct mx25l_softc *sc; 548 int err; 549 550 sc = device_get_softc(dev); 551 err = 0; 552 553 M25PXX_LOCK(sc); 554 if (sc->sc_taskstate == TSTATE_RUNNING) { 555 sc->sc_taskstate = TSTATE_STOPPING; 556 wakeup(sc); 557 while (err == 0 && sc->sc_taskstate != TSTATE_STOPPED) { 558 err = msleep(sc, &sc->sc_mtx, 0, "mx25dt", hz * 3); 559 if (err != 0) { 560 sc->sc_taskstate = TSTATE_RUNNING; 561 device_printf(dev, 562 "Failed to stop queue task\n"); 563 } 564 } 565 } 566 M25PXX_UNLOCK(sc); 567 568 if (err == 0 && sc->sc_taskstate == TSTATE_STOPPED) { 569 disk_destroy(sc->sc_disk); 570 bioq_flush(&sc->sc_bio_queue, NULL, ENXIO); 571 M25PXX_LOCK_DESTROY(sc); 572 } 573 return (err); 574 } 575 576 static int 577 mx25l_open(struct disk *dp) 578 { 579 return (0); 580 } 581 582 static int 583 mx25l_close(struct disk *dp) 584 { 585 586 return (0); 587 } 588 589 static int 590 mx25l_ioctl(struct disk *dp, u_long cmd, void *data, int fflag, 591 struct thread *td) 592 { 593 594 return (EINVAL); 595 } 596 597 static void 598 mx25l_strategy(struct bio *bp) 599 { 600 struct mx25l_softc *sc; 601 602 sc = (struct mx25l_softc *)bp->bio_disk->d_drv1; 603 M25PXX_LOCK(sc); 604 bioq_disksort(&sc->sc_bio_queue, bp); 605 wakeup(sc); 606 M25PXX_UNLOCK(sc); 607 } 608 609 static int 610 mx25l_getattr(struct bio *bp) 611 { 612 struct mx25l_softc *sc; 613 device_t dev; 614 615 if (bp->bio_disk == NULL || bp->bio_disk->d_drv1 == NULL) 616 return (ENXIO); 617 618 sc = bp->bio_disk->d_drv1; 619 dev = sc->sc_dev; 620 621 if (strcmp(bp->bio_attribute, "SPI::device") == 0) { 622 if (bp->bio_length != sizeof(dev)) 623 return (EFAULT); 624 bcopy(&dev, bp->bio_data, sizeof(dev)); 625 } else 626 return (-1); 627 return (0); 628 } 629 630 static void 631 mx25l_task(void *arg) 632 { 633 struct mx25l_softc *sc = (struct mx25l_softc*)arg; 634 struct bio *bp; 635 device_t dev; 636 637 for (;;) { 638 dev = sc->sc_dev; 639 M25PXX_LOCK(sc); 640 do { 641 if (sc->sc_taskstate == TSTATE_STOPPING) { 642 sc->sc_taskstate = TSTATE_STOPPED; 643 M25PXX_UNLOCK(sc); 644 wakeup(sc); 645 kproc_exit(0); 646 } 647 bp = bioq_first(&sc->sc_bio_queue); 648 if (bp == NULL) 649 msleep(sc, &sc->sc_mtx, PRIBIO, "mx25jq", 0); 650 } while (bp == NULL); 651 bioq_remove(&sc->sc_bio_queue, bp); 652 M25PXX_UNLOCK(sc); 653 654 switch (bp->bio_cmd) { 655 case BIO_READ: 656 bp->bio_error = mx25l_read(dev, bp->bio_offset, 657 bp->bio_data, bp->bio_bcount); 658 break; 659 case BIO_WRITE: 660 bp->bio_error = mx25l_write(dev, bp->bio_offset, 661 bp->bio_data, bp->bio_bcount); 662 break; 663 default: 664 bp->bio_error = EINVAL; 665 } 666 667 668 biodone(bp); 669 } 670 } 671 672 static devclass_t mx25l_devclass; 673 674 static device_method_t mx25l_methods[] = { 675 /* Device interface */ 676 DEVMETHOD(device_probe, mx25l_probe), 677 DEVMETHOD(device_attach, mx25l_attach), 678 DEVMETHOD(device_detach, mx25l_detach), 679 680 { 0, 0 } 681 }; 682 683 static driver_t mx25l_driver = { 684 "mx25l", 685 mx25l_methods, 686 sizeof(struct mx25l_softc), 687 }; 688 689 DRIVER_MODULE(mx25l, spibus, mx25l_driver, mx25l_devclass, 0, 0); 690 MODULE_DEPEND(mx25l, spibus, 1, 1, 1); 691